This document provides a standard method for determining the total polyphenol content of green and black tea using a colorimetric assay with Folin-Ciocalteu reagent. Tea samples are extracted with methanol or hot water to solubilize polyphenols. The extracts are then reacted with Folin-Ciocalteu reagent to produce a blue color, the absorbance of which is measured at 765 nm. By comparing to a standard curve made with gallic acid, the total polyphenol content of the tea sample is determined. The document specifies reagents, apparatus, procedures, calculations, precision criteria and reporting requirements for the analytical method.
This document outlines requirements for certification bodies that certify products, processes, and services. It covers general requirements such as legal responsibilities, impartiality, confidentiality, and structuring of the certification body. It also specifies requirements for certification body personnel, resources, processes for application review, evaluation, certification decisions, surveillance activities, and management systems. Conformity with these requirements is necessary for bodies certifying products, processes, or services. The document aims to ensure certifications are issued on an impartial and consistent basis by competent certification bodies.
Tiêu chuẩn ISO 14644 cho phòng sạch phần 12: các thông số kỹ thuật để theo dõi độ sạch của không khí theo nồng độ hạt kích thước nano. Xem thêm các tài liệu khác trên kênh của Công ty Cổ phần Tư vấn Thiết kế GMP EU
Tiêu chuẩn ISO 14644 cho phòng sạch phần 9: phân loại độ sạch của bề mặt thông qua nồng độ tiểu phân. Xem thêm các tài liệu khác trên kênh của Công ty Cổ phần Tư vấn Thiết kế GMP EU
This document provides a standardized method for converting frequency-dependent airborne sound insulation values into single-number quantities and defines terms. It describes procedures for evaluating single-number quantities from measurements in one-third octave or octave bands, including comparing values to references, calculating spectrum adaptation terms based on typical noise spectra, and stating results. Tables list common single-number quantities for rating airborne sound insulation of building elements and in buildings.
A project on the Mother plant of Petrochemical Industry.
110 MT per year production capacity of NCP plant at RIL- VMD. Detailed studies on Short residence time Furnaces, Distillation columns, Catalytic converters, heat exchangers etc. calculations made on process parameters and mechanical design aspects.
This document establishes requirements for qualifying and assessing personnel who perform vibration condition monitoring and diagnostics of machines. It defines four categories of personnel with increasing levels of responsibility and requirements for education, training, experience and examinations. Annex A provides details on training course requirements. Annex B lists applicable international standards. The document aims to promote effective condition monitoring by helping to ensure personnel have the necessary competence.
This document outlines requirements for certification bodies that certify products, processes, and services. It covers general requirements such as legal responsibilities, impartiality, confidentiality, and structuring of the certification body. It also specifies requirements for certification body personnel, resources, processes for application review, evaluation, certification decisions, surveillance activities, and management systems. Conformity with these requirements is necessary for bodies certifying products, processes, or services. The document aims to ensure certifications are issued on an impartial and consistent basis by competent certification bodies.
Tiêu chuẩn ISO 14644 cho phòng sạch phần 12: các thông số kỹ thuật để theo dõi độ sạch của không khí theo nồng độ hạt kích thước nano. Xem thêm các tài liệu khác trên kênh của Công ty Cổ phần Tư vấn Thiết kế GMP EU
Tiêu chuẩn ISO 14644 cho phòng sạch phần 9: phân loại độ sạch của bề mặt thông qua nồng độ tiểu phân. Xem thêm các tài liệu khác trên kênh của Công ty Cổ phần Tư vấn Thiết kế GMP EU
This document provides a standardized method for converting frequency-dependent airborne sound insulation values into single-number quantities and defines terms. It describes procedures for evaluating single-number quantities from measurements in one-third octave or octave bands, including comparing values to references, calculating spectrum adaptation terms based on typical noise spectra, and stating results. Tables list common single-number quantities for rating airborne sound insulation of building elements and in buildings.
A project on the Mother plant of Petrochemical Industry.
110 MT per year production capacity of NCP plant at RIL- VMD. Detailed studies on Short residence time Furnaces, Distillation columns, Catalytic converters, heat exchangers etc. calculations made on process parameters and mechanical design aspects.
This document establishes requirements for qualifying and assessing personnel who perform vibration condition monitoring and diagnostics of machines. It defines four categories of personnel with increasing levels of responsibility and requirements for education, training, experience and examinations. Annex A provides details on training course requirements. Annex B lists applicable international standards. The document aims to promote effective condition monitoring by helping to ensure personnel have the necessary competence.
This international standard provides procedures for determining the water absorptiveness of paper and board using the Cobb method. A test piece is exposed to water for a specified time, then excess water is removed and the piece is blotted. The increase in mass is measured and expressed in grams per square meter. The standard outlines reagents, apparatus, sampling methods, conditioning of samples, preparation of test pieces, test procedures, expression of results, and reporting requirements to allow for consistent measurement of water absorptiveness according to the Cobb method.
Europe WEEE Directive "Recast" Recap 歐洲電子回收政策現狀與展望taitronics
This document discusses the WEEE Directive Recast in Europe and how to comply with its regulations. It covers the expanded product scope under the recast, increased collection targets for member states, and the role of compliance schemes. Producers can register through compliance schemes to meet obligations like reporting. The presentation also discusses how ERP provides a full-service EuropePlusPackage to help producers comply across Europe through local registrations, declarations, collections and more. Finally, it addresses the EPEAT certification system and how ERP supports certification and provides compliant B2B services.
Assessing new business processes and technologies for eInvoicingFriso de Jong
This document provides a framework for assessing new technologies and business processes for electronic invoicing (eInvoicing). The framework consists of four layers: semantics, interaction models, processes, and technology.
The semantics layer provides unambiguous definitions for eInvoicing terms. The interaction models layer describes how sellers and buyers organize invoice exchanges. The processes layer shows the process steps and components. The technology layer positions specific technologies that can implement the processes.
The framework is intended to help categorize eInvoicing topics and assess new developments by comparing them to the layers in a bottom-up approach, showing compliance with requirements and guidance for implementation.
The CEN/ eInvoicing 2 Workshop presents the following draft CWAs for public review
- CWA2c-Monitoring_legal_requirements_for_cross_border_e-Invoicing.pdf
- CWA1 Adoption programme for increased eInvoicing in European business processes
- CWA2a e-Invoicing Compliance Guidelines Commentary
- CWA2b e-Invoicing Compliance Guidelines_v0.90-b
- CWA3 Assessing new business processes and technologies for eInvoicing
- CWA4 Emerging network infrastructure of eInvoice service providers throughout Europe
Comments have to be written down in the attached template and to be sent to the Secretary by 20 August 2009 at the latest.
More information on : http://www.cen.eu/cenorm/sectors/sectors/isss/activity/einvoicing_2.asp
Please forward this message to any interested party.
Comments can also be posted on ebusiness knowledge village
on Slideshare
http://www.slideshare.net/group/electronic-business-knowledge-village
on linkedin
http://www.linkedin.com/groups?gid=1106767
This document describes test methods for determining the characteristics of grouts used in installing ceramic tiles. It outlines procedures for determining flexural and compressive strength, water absorption, shrinkage, resistance to abrasion, transverse deformation, and chemical resistance of grouts. The tests are to be conducted according to general conditions including sampling, test environments, sample preparation and mixing, and reporting requirements. Specific apparatus and testing steps are provided for each test method.
This document describes test methods for determining the characteristics of grouts used in installing ceramic tiles. It outlines procedures for determining flexural and compressive strength, water absorption, shrinkage, resistance to abrasion, transverse deformation, and chemical resistance of grouts. The tests are to be conducted according to general conditions including sampling, test environments, sample preparation and mixing, and reporting requirements. Specific apparatus and testing steps are provided for each test method.
This document describes a standardized test method for determining the adhesion of paint, varnish or other coatings. The method involves applying the coating to a test panel, then bonding dollies to the coated surface using an adhesive. The bonded assemblies are placed in a tensile tester and subjected to a controlled tensile test to measure the force required to break the coating-substrate bond. Test parameters such as dolly size, adhesive selection, substrate material, and coating application and drying are specified to standardize the test method. The results indicate the minimum tensile stress needed to detach the coating from the substrate.
아보패널PC ARBOR ASLAN-W715C 15.6 인치 산업용패널PC 매뉴얼HION IT
아보, ASLAN-W715C, 15.6 인치 와이드 스크린 산업용 패널 PC, 인텔 J1900 쿼드 코어 ™ 프로세서
산업용 PC, ASLAN-W715C 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, ASLAN-W715C 패널PC는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
15.6" 1366 x 768 WXGA LCD Display w/ LED Backlight
Flat panel with projected capacitive touchscreen
Front panel compliant with IP65
Anti-scratch surface: 7H hardness
Vertical I/O Design
Easy Maintenance Design for CFast/HDD/SSD
Serial Ports (RS-232/485), RS-485 w/ Auto-flow Control
Mini PCIe expansion slot support
Fanless cooling system
Cable-less Design
Low power consumption
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory : 1 x 4GB DDR3L SO-DIMM RAM module installed
LAN :
2 x Intel® I210AT GbE controllers
1 x Realtek® 8111E GbE controller
Watchdog Timer : 1~255 levels reset
STORAGE
Device 2 x outside-accessible 2.5” drive bay (default), or CFast slot (optional for OEM version)
AUDIO
Speaker 2 x 2W speakers (optional)
LCD DISPLAY
Size/Type : 15.6" TFT LCD Panel
Max. Resolution : 1366 x 768, WXGA
Max. Colors : 16.2M
Luminance : 300 cd/m²
Touch Screen : Projected capacitive touch panel
View Angle (U/D/R/L) : 80°/80°/85°/85°
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket (Full Size)
EXTERNAL I/O
Serial Ports : 2 x RS232 & 2 x RS-232/485 w/ auto flow control
USB Ports :
1 x Type-A USB 3.0 ports
3 x Type-A USB 2.0 port
LAN : 3 x RJ-45 GbE ports
DVI : 1 x DVI-I connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension (W x H x D) : 404.00 x 255.00 x 49.20 mm (15.9” x 10.0” x 1.93”)
Weight (Net) : 4.6 kg (10.14 lb)
ENVIRONMENT
Operating Temp. : -20ºC ~ 55ºC (-4°F ~ 140°F)
Storage Temp. : -30ºC ~ 70°C (-22°F ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 60°C (non-condensing)
Vibration : 5 ~ 500Hz, 1Grms Random (with CFast/SSD)
Shock : Operating 10G, 11ms Non-operating 30G, 11ms (with CFast/SSD)
OS SUPPORT
W7 Pro / WS7E / W8.1 Industry / Linux: Ubuntu
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보패널PC ARBOR ASLAN-W719C 18.5인치 산업용패널PC 매뉴얼HION IT
아보 ASLAN-W719C, 18.5 인치 와이드 스크린 산업용 패널 PC, 인텔 J1900 쿼드 코어 ™ 프로세서
산업용 PC, ASLAN-W719C 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, ASLAN-W719C 패널 PC 는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
18.5" 1366 x 768 WXGA LCD Display w/ LED Backlight
Flat panel with projected capacitive touchscreen
Front panel compliant with IP65
Anti-scratch surface: 7H hardness
Vertical I/O Design
Easy Maintenance Design for CFast/HDD/SSD
Serial Ports (RS-232/485), w/ Auto-flow Control
Mini PCIe expansion slot support
Fanless cooling system
Cable-less Design
Low power consumption
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory :
4GB DDR3L SO-DIMM RAM module installed
1 x DDR3L SO-DIMM Socket, supporting 1066/1333 MHz SDRAM up to 8GB
LAN :
2 x Intel® I210AT GbE controllers
1 x Realtek® 8111E GbE controller
Watchdog Timer : 1~255 levels reset
STORAGE
Device : 2 x outside-accessible 2.5” drive bay (default), or CFast slot (optional for OEM version)
AUDIO
Speaker : 2 x 2W speakers (optional)
LCD DISPLAY
Size/Type : 18.5" TFT LCD Panel
Max. Resolution : 1366 x 768, WXGA
Max. Colors : 16.2M
Luminance : 300 cd/m²
Touch Screen : Projected capacitive touch panel
View Angle (U/D/R/L) : 80°/80°/85°/85°
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket (Full Size)
EXTERNAL I/O
Serial Ports : 2 x RS232 & 2 x RS-232/485 w/ auto flow control
USB Ports :
1 x Type-A USB 3.0 ports
3 x Type-A USB 2.0 port
LAN : 3 x RJ-45 GbE ports
DVI : 1 x DVI-I connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension : (W x H x D) : 470.00 x 295.00 x 49.20 mm (18.5” x 11.6” x 1.93”)
Weight (Net) : 5.7 kg (12.5 lb)
ENVIRONMENT
Operating Temp. : -20ºC ~ 55ºC (-4°F ~ 140°F)
Storage Temp. : -30ºC ~ 70°C (-22°F ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 60°C (non-condensing)
Vibration : 5 ~ 500Hz, 1Grms Random (with CFast/SSD)
Shock : Operating 10G, 11ms Non-operating 30G, 11ms (with CFast/SSD)
OS SUPPORT
W7 Pro / WS7E / W8.1 Industry / Linux: Ubuntu
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보패널PC ARBOR ASLAN-W722C 21.5인치 산업용패널PC 매뉴얼HION IT
아보 ASLAN-W722C, 21.5 인치 와이드 스크린 산업용 패널 PC, 인텔 J1900 쿼드 코어 ™ 프로세서
산업용 PC, ASLAN-W722C 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, ASLAN-W722C 패널 PC 는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
21.5" 1920 x 1080 FHD LCD Display w/ LED Backlight
Flat panel with projected capacitive touchscreen
Front panel compliant with IP65
Anti-scratch surface: 7H hardness
Vertical I/O Design
Easy Maintenance Design for CFast/HDD/SSD
Serial Ports (RS-232/485), RS-485 w/ Auto-flow Control
Mini PCIe expansion slot support
Fanless cooling system
Cable-less Design
Low power consumption
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory : 1 x 4GB DDR3L SO-DIMM RAM module installed
LAN :
2 x Intel® I210AT GbE controllers
1 x Realtek® 8111E GbE controller
Watchdog Timer : 1~255 levels reset
STORAGE
Device : 2 x outside-accessible 2.5” drive bay (default), or CFast slot (optional for OEM version)
AUDIO
Speaker : 2 x 2W speakers (optional)
LCD DISPLAY
Size/Type : 21.5" TFT LCD Panel
Max. Resolution : 1920 x 1080, FHD
Max. Colors : 16.2M
Luminance : 250 cd/m²
Touch Screen : Projected capacitive touch panel
View Angle (U/D/R/L) : 80°/80°/85°/85°
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket (Full Size)
EXTERNAL I/O
Serial Ports : 2 x RS232 & 2 x RS-232/485 w/ auto flow control
USB Ports :
1 x Type-A USB 3.0 ports
3 x Type-A USB 2.0 port
LAN : 3 x RJ-45 GbE ports
DVI : 1 x DVI-I connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension (W x H x D) : 536.00 x 332.00 x 48.40 mm (21.1” x 13.1” x 1.90”)
Weight (Net) : 7 kg (15.4 lb)
ENVIRONMENT
Operating Temp. : -20ºC ~ 55ºC (-4ºF ~ 140°F)
Storage Temp. : -30ºC ~ 70°C (-22°F ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 60°C (non-condensing)
Vibration : 5 ~ 500Hz, 0.5Grms Random (with CFast/SSD)
Shock : Operating 10G, 11ms Non-operating 30G, 11ms (with CFast/SSD)
OS SUPPORT
W7 Pro / WS7E / W8.1 Industry / Linux: Ubuntu
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
This document provides the standard for safety of machinery and general principles for design. It outlines the strategy for conducting risk assessments and reducing risks related to machinery. The standard establishes procedures for determining the limits of machinery, identifying hazards, estimating risks, and evaluating risks. It also provides guidance on implementing inherent safety design measures, safeguarding, complementary protective measures, and including necessary information for safe use. Documentation of the risk assessment and risk reduction processes is required.
Tiêu chuẩn ISO 14644 cho phòng sạch phần 2: thông số kỹ thuật đánh giá duy trì đáp ứng iso 14644. Xem thêm các tài liệu khác trên kênh của Công ty Cổ phần Tư vấn Thiết kế GMP EU
Tiêu chuẩn ISO 14644 cho phòng sạch phần 3: phòng sạch và các môi trường kiểm soát liên quan. Xem thêm các tài liệu khác trên kênh của Công ty Cổ phần Tư vấn Thiết kế GMP EU
Techno-economic analyses of specific Toluene Diisocyanate (TDI) production processes, presenting capital investment breakdown, raw materials consumed and operating costs.
Know more at www.intratec.us/products/tdi-production-processes
1) ICT standards developed by global open standards organizations are important for innovation in Europe but are currently outside the scope of the European standardization framework.
2) Reforming the Council Decision 87/95/EEC is proposed to provide a process for using these global ICT standards in EU policies and public procurement.
3) A concept for modernizing the European ICT standardization policy was developed with stakeholder input and is ready for implementation through a revised Council Decision, decoupled from the revision of Directive 89/34.
This document outlines standards for the competence of testing and calibration laboratories. It invites recipients to submit any relevant patent rights they are aware of and provides guidelines for laboratories to establish quality management systems, ensure technical competence, validate test and calibration methods, calibrate equipment, and report test and calibration results. The document establishes requirements for laboratories to obtain and maintain ISO/IEC 17025 accreditation and comply with international standards for testing and calibration.
This document defines terms used in human resource management standards. It includes over 70 terms organized into 14 categories related to the organization, human resources and planning, people and organization, human resource metrics, human governance, sustainable employability, diversity and inclusion, workforce planning, recruitment, workforce mobility, talent management, and knowledge management. The purpose is to help facilitate a common understanding and maintain consistency in fundamental vocabulary across human resource management standards.
This document provides an overview and guidebook for implementing the IECQ QC 080000 Hazardous Substances Process Management (HSPM) system. It discusses the growing regulatory requirements around the world to restrict hazardous substances in electrical products and benefits of adopting the IECQ QC 080000 standard. The guidebook outlines the certification process and requirements to establish a hazardous substances management system that can help companies meet international compliance standards and enhance their competitiveness in global markets.
Webinar on Environmental Footprint Screening studyMarisa Vieira
This slides deck includes the materials used in the webinar we hosted on the screening study for the Environmental Footprint pilot phase. We gave this webinar on behalf of the Environmental Footprint team from the European Commission.
This international standard provides procedures for determining the water absorptiveness of paper and board using the Cobb method. A test piece is exposed to water for a specified time, then excess water is removed and the piece is blotted. The increase in mass is measured and expressed in grams per square meter. The standard outlines reagents, apparatus, sampling methods, conditioning of samples, preparation of test pieces, test procedures, expression of results, and reporting requirements to allow for consistent measurement of water absorptiveness according to the Cobb method.
Europe WEEE Directive "Recast" Recap 歐洲電子回收政策現狀與展望taitronics
This document discusses the WEEE Directive Recast in Europe and how to comply with its regulations. It covers the expanded product scope under the recast, increased collection targets for member states, and the role of compliance schemes. Producers can register through compliance schemes to meet obligations like reporting. The presentation also discusses how ERP provides a full-service EuropePlusPackage to help producers comply across Europe through local registrations, declarations, collections and more. Finally, it addresses the EPEAT certification system and how ERP supports certification and provides compliant B2B services.
Assessing new business processes and technologies for eInvoicingFriso de Jong
This document provides a framework for assessing new technologies and business processes for electronic invoicing (eInvoicing). The framework consists of four layers: semantics, interaction models, processes, and technology.
The semantics layer provides unambiguous definitions for eInvoicing terms. The interaction models layer describes how sellers and buyers organize invoice exchanges. The processes layer shows the process steps and components. The technology layer positions specific technologies that can implement the processes.
The framework is intended to help categorize eInvoicing topics and assess new developments by comparing them to the layers in a bottom-up approach, showing compliance with requirements and guidance for implementation.
The CEN/ eInvoicing 2 Workshop presents the following draft CWAs for public review
- CWA2c-Monitoring_legal_requirements_for_cross_border_e-Invoicing.pdf
- CWA1 Adoption programme for increased eInvoicing in European business processes
- CWA2a e-Invoicing Compliance Guidelines Commentary
- CWA2b e-Invoicing Compliance Guidelines_v0.90-b
- CWA3 Assessing new business processes and technologies for eInvoicing
- CWA4 Emerging network infrastructure of eInvoice service providers throughout Europe
Comments have to be written down in the attached template and to be sent to the Secretary by 20 August 2009 at the latest.
More information on : http://www.cen.eu/cenorm/sectors/sectors/isss/activity/einvoicing_2.asp
Please forward this message to any interested party.
Comments can also be posted on ebusiness knowledge village
on Slideshare
http://www.slideshare.net/group/electronic-business-knowledge-village
on linkedin
http://www.linkedin.com/groups?gid=1106767
This document describes test methods for determining the characteristics of grouts used in installing ceramic tiles. It outlines procedures for determining flexural and compressive strength, water absorption, shrinkage, resistance to abrasion, transverse deformation, and chemical resistance of grouts. The tests are to be conducted according to general conditions including sampling, test environments, sample preparation and mixing, and reporting requirements. Specific apparatus and testing steps are provided for each test method.
This document describes test methods for determining the characteristics of grouts used in installing ceramic tiles. It outlines procedures for determining flexural and compressive strength, water absorption, shrinkage, resistance to abrasion, transverse deformation, and chemical resistance of grouts. The tests are to be conducted according to general conditions including sampling, test environments, sample preparation and mixing, and reporting requirements. Specific apparatus and testing steps are provided for each test method.
This document describes a standardized test method for determining the adhesion of paint, varnish or other coatings. The method involves applying the coating to a test panel, then bonding dollies to the coated surface using an adhesive. The bonded assemblies are placed in a tensile tester and subjected to a controlled tensile test to measure the force required to break the coating-substrate bond. Test parameters such as dolly size, adhesive selection, substrate material, and coating application and drying are specified to standardize the test method. The results indicate the minimum tensile stress needed to detach the coating from the substrate.
아보패널PC ARBOR ASLAN-W715C 15.6 인치 산업용패널PC 매뉴얼HION IT
아보, ASLAN-W715C, 15.6 인치 와이드 스크린 산업용 패널 PC, 인텔 J1900 쿼드 코어 ™ 프로세서
산업용 PC, ASLAN-W715C 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, ASLAN-W715C 패널PC는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
15.6" 1366 x 768 WXGA LCD Display w/ LED Backlight
Flat panel with projected capacitive touchscreen
Front panel compliant with IP65
Anti-scratch surface: 7H hardness
Vertical I/O Design
Easy Maintenance Design for CFast/HDD/SSD
Serial Ports (RS-232/485), RS-485 w/ Auto-flow Control
Mini PCIe expansion slot support
Fanless cooling system
Cable-less Design
Low power consumption
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory : 1 x 4GB DDR3L SO-DIMM RAM module installed
LAN :
2 x Intel® I210AT GbE controllers
1 x Realtek® 8111E GbE controller
Watchdog Timer : 1~255 levels reset
STORAGE
Device 2 x outside-accessible 2.5” drive bay (default), or CFast slot (optional for OEM version)
AUDIO
Speaker 2 x 2W speakers (optional)
LCD DISPLAY
Size/Type : 15.6" TFT LCD Panel
Max. Resolution : 1366 x 768, WXGA
Max. Colors : 16.2M
Luminance : 300 cd/m²
Touch Screen : Projected capacitive touch panel
View Angle (U/D/R/L) : 80°/80°/85°/85°
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket (Full Size)
EXTERNAL I/O
Serial Ports : 2 x RS232 & 2 x RS-232/485 w/ auto flow control
USB Ports :
1 x Type-A USB 3.0 ports
3 x Type-A USB 2.0 port
LAN : 3 x RJ-45 GbE ports
DVI : 1 x DVI-I connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension (W x H x D) : 404.00 x 255.00 x 49.20 mm (15.9” x 10.0” x 1.93”)
Weight (Net) : 4.6 kg (10.14 lb)
ENVIRONMENT
Operating Temp. : -20ºC ~ 55ºC (-4°F ~ 140°F)
Storage Temp. : -30ºC ~ 70°C (-22°F ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 60°C (non-condensing)
Vibration : 5 ~ 500Hz, 1Grms Random (with CFast/SSD)
Shock : Operating 10G, 11ms Non-operating 30G, 11ms (with CFast/SSD)
OS SUPPORT
W7 Pro / WS7E / W8.1 Industry / Linux: Ubuntu
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보패널PC ARBOR ASLAN-W719C 18.5인치 산업용패널PC 매뉴얼HION IT
아보 ASLAN-W719C, 18.5 인치 와이드 스크린 산업용 패널 PC, 인텔 J1900 쿼드 코어 ™ 프로세서
산업용 PC, ASLAN-W719C 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, ASLAN-W719C 패널 PC 는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
18.5" 1366 x 768 WXGA LCD Display w/ LED Backlight
Flat panel with projected capacitive touchscreen
Front panel compliant with IP65
Anti-scratch surface: 7H hardness
Vertical I/O Design
Easy Maintenance Design for CFast/HDD/SSD
Serial Ports (RS-232/485), w/ Auto-flow Control
Mini PCIe expansion slot support
Fanless cooling system
Cable-less Design
Low power consumption
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory :
4GB DDR3L SO-DIMM RAM module installed
1 x DDR3L SO-DIMM Socket, supporting 1066/1333 MHz SDRAM up to 8GB
LAN :
2 x Intel® I210AT GbE controllers
1 x Realtek® 8111E GbE controller
Watchdog Timer : 1~255 levels reset
STORAGE
Device : 2 x outside-accessible 2.5” drive bay (default), or CFast slot (optional for OEM version)
AUDIO
Speaker : 2 x 2W speakers (optional)
LCD DISPLAY
Size/Type : 18.5" TFT LCD Panel
Max. Resolution : 1366 x 768, WXGA
Max. Colors : 16.2M
Luminance : 300 cd/m²
Touch Screen : Projected capacitive touch panel
View Angle (U/D/R/L) : 80°/80°/85°/85°
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket (Full Size)
EXTERNAL I/O
Serial Ports : 2 x RS232 & 2 x RS-232/485 w/ auto flow control
USB Ports :
1 x Type-A USB 3.0 ports
3 x Type-A USB 2.0 port
LAN : 3 x RJ-45 GbE ports
DVI : 1 x DVI-I connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension : (W x H x D) : 470.00 x 295.00 x 49.20 mm (18.5” x 11.6” x 1.93”)
Weight (Net) : 5.7 kg (12.5 lb)
ENVIRONMENT
Operating Temp. : -20ºC ~ 55ºC (-4°F ~ 140°F)
Storage Temp. : -30ºC ~ 70°C (-22°F ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 60°C (non-condensing)
Vibration : 5 ~ 500Hz, 1Grms Random (with CFast/SSD)
Shock : Operating 10G, 11ms Non-operating 30G, 11ms (with CFast/SSD)
OS SUPPORT
W7 Pro / WS7E / W8.1 Industry / Linux: Ubuntu
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
아보패널PC ARBOR ASLAN-W722C 21.5인치 산업용패널PC 매뉴얼HION IT
아보 ASLAN-W722C, 21.5 인치 와이드 스크린 산업용 패널 PC, 인텔 J1900 쿼드 코어 ™ 프로세서
산업용 PC, ASLAN-W722C 는 고휘도 TFT LCD 디스플레이, 멀티미디어 및 네트워킹 구성 요소 및 사용자 친화적인 터치 스크린을 사용하여 고성능 코어 논리를 바탕으로 구축, 견고하고 컴팩트하게 설계 디자인되었습니다.
최첨단 기술로 설계된 ARBOR, ASLAN-W722C 패널 PC 는 판매 시점과 정보 시점에서 기계 제어 및 건강 관리에 이르기까지 포괄적인 응용 프로그램 라인을 제공하는 강력하고 컴팩트 한 공간 절약형 패널PC 입니다.
21.5" 1920 x 1080 FHD LCD Display w/ LED Backlight
Flat panel with projected capacitive touchscreen
Front panel compliant with IP65
Anti-scratch surface: 7H hardness
Vertical I/O Design
Easy Maintenance Design for CFast/HDD/SSD
Serial Ports (RS-232/485), RS-485 w/ Auto-flow Control
Mini PCIe expansion slot support
Fanless cooling system
Cable-less Design
Low power consumption
2 x SMA Antenna Holes for optional WiFi Function
9~36V Wide-Range DC Input
SYSTEM
CPU : Intel® J1900 Quad-Core™ Processor 2.0GHz
Memory : 1 x 4GB DDR3L SO-DIMM RAM module installed
LAN :
2 x Intel® I210AT GbE controllers
1 x Realtek® 8111E GbE controller
Watchdog Timer : 1~255 levels reset
STORAGE
Device : 2 x outside-accessible 2.5” drive bay (default), or CFast slot (optional for OEM version)
AUDIO
Speaker : 2 x 2W speakers (optional)
LCD DISPLAY
Size/Type : 21.5" TFT LCD Panel
Max. Resolution : 1920 x 1080, FHD
Max. Colors : 16.2M
Luminance : 250 cd/m²
Touch Screen : Projected capacitive touch panel
View Angle (U/D/R/L) : 80°/80°/85°/85°
POWER SYSTEM
Power Input : DC 9~36V
CERTIFICATION
EMC / EMI : CE, FCC Class A
EXPANSION
Expansion Bus : 1 x Mini-card socket (Full Size)
EXTERNAL I/O
Serial Ports : 2 x RS232 & 2 x RS-232/485 w/ auto flow control
USB Ports :
1 x Type-A USB 3.0 ports
3 x Type-A USB 2.0 port
LAN : 3 x RJ-45 GbE ports
DVI : 1 x DVI-I connector
WiFi : 2 x SMA antenna holes for optional WiFi function
MECHANICAL
Mounting Type : Panel Mounting and VESA-100 Mounting
Chassis : Panel-mounting chassis, aluminum front bezel and SECC steel chassis
Dimension (W x H x D) : 536.00 x 332.00 x 48.40 mm (21.1” x 13.1” x 1.90”)
Weight (Net) : 7 kg (15.4 lb)
ENVIRONMENT
Operating Temp. : -20ºC ~ 55ºC (-4ºF ~ 140°F)
Storage Temp. : -30ºC ~ 70°C (-22°F ~ 158°F)
Operating Humidity : 10 ~ 95% RH @ 60°C (non-condensing)
Vibration : 5 ~ 500Hz, 0.5Grms Random (with CFast/SSD)
Shock : Operating 10G, 11ms Non-operating 30G, 11ms (with CFast/SSD)
OS SUPPORT
W7 Pro / WS7E / W8.1 Industry / Linux: Ubuntu
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
This document provides the standard for safety of machinery and general principles for design. It outlines the strategy for conducting risk assessments and reducing risks related to machinery. The standard establishes procedures for determining the limits of machinery, identifying hazards, estimating risks, and evaluating risks. It also provides guidance on implementing inherent safety design measures, safeguarding, complementary protective measures, and including necessary information for safe use. Documentation of the risk assessment and risk reduction processes is required.
Tiêu chuẩn ISO 14644 cho phòng sạch phần 2: thông số kỹ thuật đánh giá duy trì đáp ứng iso 14644. Xem thêm các tài liệu khác trên kênh của Công ty Cổ phần Tư vấn Thiết kế GMP EU
Tiêu chuẩn ISO 14644 cho phòng sạch phần 3: phòng sạch và các môi trường kiểm soát liên quan. Xem thêm các tài liệu khác trên kênh của Công ty Cổ phần Tư vấn Thiết kế GMP EU
Techno-economic analyses of specific Toluene Diisocyanate (TDI) production processes, presenting capital investment breakdown, raw materials consumed and operating costs.
Know more at www.intratec.us/products/tdi-production-processes
1) ICT standards developed by global open standards organizations are important for innovation in Europe but are currently outside the scope of the European standardization framework.
2) Reforming the Council Decision 87/95/EEC is proposed to provide a process for using these global ICT standards in EU policies and public procurement.
3) A concept for modernizing the European ICT standardization policy was developed with stakeholder input and is ready for implementation through a revised Council Decision, decoupled from the revision of Directive 89/34.
This document outlines standards for the competence of testing and calibration laboratories. It invites recipients to submit any relevant patent rights they are aware of and provides guidelines for laboratories to establish quality management systems, ensure technical competence, validate test and calibration methods, calibrate equipment, and report test and calibration results. The document establishes requirements for laboratories to obtain and maintain ISO/IEC 17025 accreditation and comply with international standards for testing and calibration.
This document defines terms used in human resource management standards. It includes over 70 terms organized into 14 categories related to the organization, human resources and planning, people and organization, human resource metrics, human governance, sustainable employability, diversity and inclusion, workforce planning, recruitment, workforce mobility, talent management, and knowledge management. The purpose is to help facilitate a common understanding and maintain consistency in fundamental vocabulary across human resource management standards.
This document provides an overview and guidebook for implementing the IECQ QC 080000 Hazardous Substances Process Management (HSPM) system. It discusses the growing regulatory requirements around the world to restrict hazardous substances in electrical products and benefits of adopting the IECQ QC 080000 standard. The guidebook outlines the certification process and requirements to establish a hazardous substances management system that can help companies meet international compliance standards and enhance their competitiveness in global markets.
Webinar on Environmental Footprint Screening studyMarisa Vieira
This slides deck includes the materials used in the webinar we hosted on the screening study for the Environmental Footprint pilot phase. We gave this webinar on behalf of the Environmental Footprint team from the European Commission.
Histololgy of Female Reproductive System.pptxAyeshaZaid1
Dive into an in-depth exploration of the histological structure of female reproductive system with this comprehensive lecture. Presented by Dr. Ayesha Irfan, Assistant Professor of Anatomy, this presentation covers the Gross anatomy and functional histology of the female reproductive organs. Ideal for students, educators, and anyone interested in medical science, this lecture provides clear explanations, detailed diagrams, and valuable insights into female reproductive system. Enhance your knowledge and understanding of this essential aspect of human biology.
TEST BANK For Basic and Clinical Pharmacology, 14th Edition by Bertram G. Kat...rightmanforbloodline
TEST BANK For Basic and Clinical Pharmacology, 14th Edition by Bertram G. Katzung, Verified Chapters 1 - 66, Complete Newest Version.
TEST BANK For Basic and Clinical Pharmacology, 14th Edition by Bertram G. Katzung, Verified Chapters 1 - 66, Complete Newest Version.
TEST BANK For Basic and Clinical Pharmacology, 14th Edition by Bertram G. Katzung, Verified Chapters 1 - 66, Complete Newest Version.
TEST BANK For Basic and Clinical Pharmacology, 14th Edition by Bertram G. Katzung, Verified Chapters 1 - 66, Complete Newest Version.
These lecture slides, by Dr Sidra Arshad, offer a quick overview of the physiological basis of a normal electrocardiogram.
Learning objectives:
1. Define an electrocardiogram (ECG) and electrocardiography
2. Describe how dipoles generated by the heart produce the waveforms of the ECG
3. Describe the components of a normal electrocardiogram of a typical bipolar lead (limb II)
4. Differentiate between intervals and segments
5. Enlist some common indications for obtaining an ECG
6. Describe the flow of current around the heart during the cardiac cycle
7. Discuss the placement and polarity of the leads of electrocardiograph
8. Describe the normal electrocardiograms recorded from the limb leads and explain the physiological basis of the different records that are obtained
9. Define mean electrical vector (axis) of the heart and give the normal range
10. Define the mean QRS vector
11. Describe the axes of leads (hexagonal reference system)
12. Comprehend the vectorial analysis of the normal ECG
13. Determine the mean electrical axis of the ventricular QRS and appreciate the mean axis deviation
14. Explain the concepts of current of injury, J point, and their significance
Study Resources:
1. Chapter 11, Guyton and Hall Textbook of Medical Physiology, 14th edition
2. Chapter 9, Human Physiology - From Cells to Systems, Lauralee Sherwood, 9th edition
3. Chapter 29, Ganong’s Review of Medical Physiology, 26th edition
4. Electrocardiogram, StatPearls - https://www.ncbi.nlm.nih.gov/books/NBK549803/
5. ECG in Medical Practice by ABM Abdullah, 4th edition
6. Chapter 3, Cardiology Explained, https://www.ncbi.nlm.nih.gov/books/NBK2214/
7. ECG Basics, http://www.nataliescasebook.com/tag/e-c-g-basics
Muktapishti is a traditional Ayurvedic preparation made from Shoditha Mukta (Purified Pearl), is believed to help regulate thyroid function and reduce symptoms of hyperthyroidism due to its cooling and balancing properties. Clinical evidence on its efficacy remains limited, necessitating further research to validate its therapeutic benefits.
Cell Therapy Expansion and Challenges in Autoimmune DiseaseHealth Advances
There is increasing confidence that cell therapies will soon play a role in the treatment of autoimmune disorders, but the extent of this impact remains to be seen. Early readouts on autologous CAR-Ts in lupus are encouraging, but manufacturing and cost limitations are likely to restrict access to highly refractory patients. Allogeneic CAR-Ts have the potential to broaden access to earlier lines of treatment due to their inherent cost benefits, however they will need to demonstrate comparable or improved efficacy to established modalities.
In addition to infrastructure and capacity constraints, CAR-Ts face a very different risk-benefit dynamic in autoimmune compared to oncology, highlighting the need for tolerable therapies with low adverse event risk. CAR-NK and Treg-based therapies are also being developed in certain autoimmune disorders and may demonstrate favorable safety profiles. Several novel non-cell therapies such as bispecific antibodies, nanobodies, and RNAi drugs, may also offer future alternative competitive solutions with variable value propositions.
Widespread adoption of cell therapies will not only require strong efficacy and safety data, but also adapted pricing and access strategies. At oncology-based price points, CAR-Ts are unlikely to achieve broad market access in autoimmune disorders, with eligible patient populations that are potentially orders of magnitude greater than the number of currently addressable cancer patients. Developers have made strides towards reducing cell therapy COGS while improving manufacturing efficiency, but payors will inevitably restrict access until more sustainable pricing is achieved.
Despite these headwinds, industry leaders and investors remain confident that cell therapies are poised to address significant unmet need in patients suffering from autoimmune disorders. However, the extent of this impact on the treatment landscape remains to be seen, as the industry rapidly approaches an inflection point.
Rasamanikya is a excellent preparation in the field of Rasashastra, it is used in various Kushtha Roga, Shwasa, Vicharchika, Bhagandara, Vatarakta, and Phiranga Roga. In this article Preparation& Comparative analytical profile for both Formulationon i.e Rasamanikya prepared by Kushmanda swarasa & Churnodhaka Shodita Haratala. The study aims to provide insights into the comparative efficacy and analytical aspects of these formulations for enhanced therapeutic outcomes.
15. Copyright International Organization for Standardization
Provided by IHS under license with ISO Licensee=Hong Kong Polytechnic Univ/9976803100
Not for Resale, 08/21/2007 19:58:15 MDT
No reproduction or networking permitted without license from IHS
--````,`,`,`,,,`,,,`,``,``,`,,,-`-`,,`,,`,`,,`---