Inspection report from Mirrored Cabidor on July 12th,2016
•
1 like•376 views
河
河 黄An inspection was conducted of a mirrored cabidor product on July 12, 2016. 511 units were available and sampled, with 1 minor defect found of exposed nails in holes and 6 minor defects found of dirty marks on surfaces. Pictures show the defects and details of the product, packaging, and inspection measurements. The factory workers reworked the defective units.
Report
Share
Report
Share
Download to read offline
Recommended
Pre-shipment inspection report on July 27th,2016
An inspection was conducted on three orders of hangbags from a factory in Guangzhou, China. Several defects were found, including stuck zippers, open seams, and untrimmed threads. Samples from orders 10878 and 18678 failed the inspection due to defect rates exceeding the allowed quality limits. The factory agreed to rework the defective items from order 10878. Overall, the inspection results for the three orders were rejected.
How to view the material certificate part 3
The document discusses how to identify fake material certificates for steel plates. It explains that fake certificates are sometimes produced to fraudulently sell steel plates. It provides tips for identifying fake certificates, such as checking that the vendor name matches the producing company, required information like quality standards are listed, and manufacturer marks are present. Using a fake certificate can cause legal and quality issues if material specifications are not actually met. The document recommends steps like searching company names online, comparing to past authentic certificates, and contacting mills directly to verify certificates are valid.
COMPANY PROFILE pdf2
OHM Inspection Services provides quality assurance and inspection services for power, petrochemical, cement, steel, and renewable energy projects. Services include inspection of equipment at vendor locations and project sites, documentation review, sample collection, and container loading verification. The company was established in 2010 and its inspectors have experience in structural equipment, mechanical devices, welding procedures, and manufacturing audits according to international and national standards. OHM Inspection Services works on a contract or per diem basis and seeks opportunities to provide inspection services to new clients.
101011 Ron Stanley Resume
Ron Stanley is a quality control professional with over 25 years of experience in mechanical inspection, production, warehousing, and quality and supervision roles. He has extensive experience ensuring products meet high quality standards through inspection, testing, troubleshooting, and implementing quality control programs. Stanley also has management experience, including directly supervising production crews and serving as Quality Manager. He maintains various technical certifications and affiliations.
Nambiraj K_Resume_New
Nambiraj K is a Metallurgical Engineer seeking a job in Materials Engineering where he can use his analytical and technical skills. He has experience in seamless tube production, heat treatment processes, metallurgical lab activities, new product development, supplier quality assurance, quality assurance audits, and failure analysis. He is familiar with steel microstructures and has experience in welding, NDT techniques, international standards, and customer complaint handling. His professional experience includes roles in quality assurance at Rane Engine Valve Ltd. and ISMT Limited. He has a B.E. in Metallurgical Engineering and was on the Anna University HOCKEY team.
dw type tie rod 15/17mm 190kN SGS report
dw type tie rod 15/17mm 190kN
China standard PSB830/1030, export grade PSB900/1100.
Anna +86 16630038170, ay@yidao-metal.com
SBO ICPHSO Presentation - ASTM F963-16
Thank you for the additional details on testing requirements for specific toy components. Providing real-world examples helps illustrate how the ASTM F963 standard is applied in practice.
Survey at:
PollEv.com/surveys/HIY2RLmHb
Audience Q&A
Body:
- Lead Content & Heavy Elements
- Use and Abuse Testing
- Small Parts Testing (if applicable)
- Phthalates Testing (if applicable)
- Flammability (if fabric or materials)
- Sharp edges/points
- Expanding Materials (if applicable)
Survey at:
PollEv.com/surveys/HIY2RLmHb
Audience Q&A
summer intership
This document summarizes market research conducted for Sunshine Fasteners Private Limited to analyze brand awareness of their SPL and CHI brands in India. Key findings include:
- SPL and CHI have good brand awareness for stainless steel fasteners but competitors like Agrawal are becoming threats.
- Customers are most satisfied with product quality but less so with price and after-sales service.
- The research evaluated brand awareness, customer satisfaction levels, and attitudes towards Sunshine's products.
Recommended
Pre-shipment inspection report on July 27th,2016
An inspection was conducted on three orders of hangbags from a factory in Guangzhou, China. Several defects were found, including stuck zippers, open seams, and untrimmed threads. Samples from orders 10878 and 18678 failed the inspection due to defect rates exceeding the allowed quality limits. The factory agreed to rework the defective items from order 10878. Overall, the inspection results for the three orders were rejected.
How to view the material certificate part 3
The document discusses how to identify fake material certificates for steel plates. It explains that fake certificates are sometimes produced to fraudulently sell steel plates. It provides tips for identifying fake certificates, such as checking that the vendor name matches the producing company, required information like quality standards are listed, and manufacturer marks are present. Using a fake certificate can cause legal and quality issues if material specifications are not actually met. The document recommends steps like searching company names online, comparing to past authentic certificates, and contacting mills directly to verify certificates are valid.
COMPANY PROFILE pdf2
OHM Inspection Services provides quality assurance and inspection services for power, petrochemical, cement, steel, and renewable energy projects. Services include inspection of equipment at vendor locations and project sites, documentation review, sample collection, and container loading verification. The company was established in 2010 and its inspectors have experience in structural equipment, mechanical devices, welding procedures, and manufacturing audits according to international and national standards. OHM Inspection Services works on a contract or per diem basis and seeks opportunities to provide inspection services to new clients.
101011 Ron Stanley Resume
Ron Stanley is a quality control professional with over 25 years of experience in mechanical inspection, production, warehousing, and quality and supervision roles. He has extensive experience ensuring products meet high quality standards through inspection, testing, troubleshooting, and implementing quality control programs. Stanley also has management experience, including directly supervising production crews and serving as Quality Manager. He maintains various technical certifications and affiliations.
Nambiraj K_Resume_New
Nambiraj K is a Metallurgical Engineer seeking a job in Materials Engineering where he can use his analytical and technical skills. He has experience in seamless tube production, heat treatment processes, metallurgical lab activities, new product development, supplier quality assurance, quality assurance audits, and failure analysis. He is familiar with steel microstructures and has experience in welding, NDT techniques, international standards, and customer complaint handling. His professional experience includes roles in quality assurance at Rane Engine Valve Ltd. and ISMT Limited. He has a B.E. in Metallurgical Engineering and was on the Anna University HOCKEY team.
dw type tie rod 15/17mm 190kN SGS report
dw type tie rod 15/17mm 190kN
China standard PSB830/1030, export grade PSB900/1100.
Anna +86 16630038170, ay@yidao-metal.com
SBO ICPHSO Presentation - ASTM F963-16
Thank you for the additional details on testing requirements for specific toy components. Providing real-world examples helps illustrate how the ASTM F963 standard is applied in practice.
Survey at:
PollEv.com/surveys/HIY2RLmHb
Audience Q&A
Body:
- Lead Content & Heavy Elements
- Use and Abuse Testing
- Small Parts Testing (if applicable)
- Phthalates Testing (if applicable)
- Flammability (if fabric or materials)
- Sharp edges/points
- Expanding Materials (if applicable)
Survey at:
PollEv.com/surveys/HIY2RLmHb
Audience Q&A
summer intership
This document summarizes market research conducted for Sunshine Fasteners Private Limited to analyze brand awareness of their SPL and CHI brands in India. Key findings include:
- SPL and CHI have good brand awareness for stainless steel fasteners but competitors like Agrawal are becoming threats.
- Customers are most satisfied with product quality but less so with price and after-sales service.
- The research evaluated brand awareness, customer satisfaction levels, and attitudes towards Sunshine's products.
Mold solutions katalog a4 final
Mold Solutions is a company that specializes in plastic injection molds and other plastic processing tools. They have facilities in Serbia and China with over 75 employees and the capacity to produce 30-40 molds per month. Their molds can have up to 128 cavities and they produce multi-component and threaded molds up to 1,800 x 1,200 x 800 mm in size weighing up to 15 tons. They provide design for manufacturing reports, mold flow simulations, and weekly and trial reports to customers throughout the mold production process.
SG PROTOTYPE MANUFACTURER CO.,LIMITED
www.sgproto.com
We mainly engaged in a variety of household appliances appearance and internal structure Model maker/Rapid prototyping/Aluminum alloy Parts /Small batch production/electrical and electronic plastic shell production. The main production equipment has CNC machining center, the appendix equipment has lathe machine, milling machine, sand blasting machine, silk screen, pad printer, automatic spraying producing line. For the surface finishing, we have professional and experienced design&producing engineers.
224-1
This document is a registration record from January 29, 2014 for Permasteelisa South China Factory - Permasteelisa Gartner Testing Laboratory located in Dongguan City, Guangdong Province, China. It provides contact information for the laboratory manager Mr. Yeung Hung-fai and states that the laboratory performs accredited testing in the category of construction materials for internal use and is normally not available for public testing.
Sorbitan monooleate
Present in any research lab, there are various chemicals and equipment. In order to conduct different essential experiments, the devices are necessary. Without lab equipment, a chemistry lab cannot function effectively as to undertake the required experiments it would not be possible.
Disney And ICTI Approved Factory - Funny Toys Gift Limited
Funny Toys Gift Limited is a manufacturer and exporter of plastic, plush, electronic, and food toys located in China. It has 400 employees and manufactures toys for major customers like Disney and Walmart. The factory is ISO9001 certified and has passed ethical audits. It has the capacity to produce 12 million toys per month through processes like injection molding, printing, and assembly.
Viton cord
Unimax International Limited, a reputable manufacturer and exporter for various kinds of fluid sealing and thermal insulation products, such as compression packings, sealing gaskets, gasket sheets, rubber sheets, etc, is committed to supplying quality products with reasonable prices to the customers around the world.
new SDR plastic mould company presentation-2016
SDR Mold Technology is a 10-year-old Chinese company that specializes in plastic injection molds and molded parts. It has over 150 employees and a 40,000 square foot facility. The company aims to work closely with customers, meet tight deadlines, and provide high quality and cost-effective solutions for automotive, medical, and industrial parts. SDR has a proven track record, serving customers in various industries around the world.
Plastpro mf presentation_march_2018
Founded in the year 2015, we Plast-Pro Solutions [Pune] are known to be among the most eminent organizations involved in offering a broad array of Moldflow CAE, Plastic product design development, Mold Cooling Analysis and Optimization, Tooling feasibility Study and skilled design resources support.
P Shaped Rubber Seal By Accurate Rubber Corp
Looking for P-Shaped Rubber Seals? We manufacture extruded rubber p strips, p seals, p shaped door gaskets, p shape weather stripping in various sizes
My cv for Ndt2 (1)
Masam Waleed is seeking a role where he can apply his skills and education in metallurgical and materials engineering, which includes internship experience in casting and ordnance factories as well as coursework covering deformation, fracture, and non-destructive testing methods. He has a M.Sc. in Metallurgical and Materials Engineering from UET Lahore and technical interests in corrosion engineering, research and development, and standards like ASTM. Personal details note computer skills in MS Office and interests in sports, food, the gym, and chess.
Face Mask Pre-shipment Inspection in China
Here is a sample report for Disposable Face Mask Pre-shipment Inspection in China that we did a few days ago, welcome to contact us for face mask quality control solutions in China & Asia
Global borosilicate glass industry 2017 market research report
This report analyzes the global borosilicate glass market from 2011-2022. Global demand for borosilicate glass increased from 857,177 metric tons in 2011 to 1,066,521 metric tons in 2015. China saw the largest growth in demand over this period, increasing from 520,068 metric tons in 2011 to 670,966 metric tons in 2015. The report covers the major manufacturers and analyzes production by region. It also examines demand trends by type (high and medium borosilicate glass tubes) and application (solar energy tubes, laboratory apparatus, etc.). The global market is projected to continue growing through 2022.
Global borosilicate glass industry 2017 market research report
This report analyzes the global borosilicate glass market from 2011-2022. Global demand for borosilicate glass increased from 857,177 metric tons in 2011 to 1,066,521 metric tons in 2015. China saw the largest growth in demand over this period, increasing from 520,068 metric tons in 2011 to 670,966 metric tons in 2015. The report covers the major manufacturers and analyzes production by region. It also examines demand trends by type (high and medium borosilicate glass tubes) and application (solar energy tubes, laboratory apparatus, etc.). The global market is projected to continue growing through 2022.
Sirris manufacturing day 2013 Nick Orchard
- The document discusses measurement of complex mechanical parts like gas turbine engine components. Precise measurement of dimensions and geometric features is important for form, fit and function.
- Improper measurement during manufacturing of an oil feed stub pipe for a Rolls-Royce Trent 900 engine led to a critically reduced wall thickness. This likely caused an in-flight engine failure on a Qantas Airbus A380.
- The investigation found issues with the manufacturing process and inspection that allowed a non-conforming part to be released and installed on the failed engine. Better measurement and inspection could have prevented this problem.
20220927 Analyze Contamination Metal On Cap.pptx
The document summarizes an investigation into metal contamination found inside plastic caps during production. Testing determined:
1) Small metal contaminants ranging from 0.3-0.6mm were found randomly located inside caps from injection unit 1. Further testing found increasing amounts of contamination over multiple cycles.
2) Trials using different plastic materials and process changes like removing movement still produced contamination, indicating the source was upstream.
3) Inspection of the melt found possible metal particles, and previous sample retains dating back months also contained contamination, suggesting a chronic issue with the material supply.
The root cause appears to be metal contamination entering the process upstream, possibly during material storage or feeding, and consistently contaminating production
Quality
The document discusses quality control requirements for various construction materials including aggregates, cement, water, admixtures and reinforcement steel. It outlines testing frequency and standards for each material to ensure quality. Key aspects covered include pre-qualification of suppliers, material certification, sampling, storage procedures, and testing of physical and chemical properties at regular intervals.
Mini Steel Plant (Billets and TMT Bar) How to Open Mini Steel plant (Billets...
This business plan can assist you with locating the ideal location, financing your new firm, and promoting your products if you're thinking of beginning a business producing billets and TMT bars. Every step of the way, we've developed this manual with the goal of arming you with the knowledge you need to launch and manage a profitable business in billets and TMT bars that will provide you with a respectable annual return on your investment. It is beneficial for your new company endeavor!
𝐂𝐨𝐧𝐭𝐚𝐜𝐭 𝐮𝐬
NIIR PROJECT CONSULTANCY SERVICES, DELHI
An ISO 9001:2015 Company
ENTREPRENEUR INDIA
106-E, Kamla Nagar, Opp. Mall ST,
New Delhi-110007, India.
Email: npcs.ei@gmail.com
info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886
Mobile: +91-9097075054, 8800733955
Website: https://www.entrepreneurindia.co
https://www.niir.org
Conexões e tubulaçães - Alfa Laval
Alfa Laval is a leading global provider of specialized tubes and fittings for demanding applications. Their sanitary range offers products suitable for most standard duties, while their UltraPure range has extra high demands on hygiene and cleanability. Alfa Laval focuses on corrosion resistance, dimensional accuracy, and structural integrity to ensure problem-free welding and assembly.
2012 deep research report on global and china glasses lens industry
This document is a 272-page research report from 2012 on the global and Chinese glasses lens industry. It provides an overview of the industry, including definitions and classifications of different lens types. It also describes lens manufacturing technologies, key global and Chinese manufacturers, production and market data from 2009-2016, as well as a feasibility analysis of a proposed 20 million piece/year resin lens project in China. In-depth information is provided on various aspects of the glasses lens industry through detailed tables, figures and analysis.
Pharmaceutical R&D China Sourcing Pilot Final Report
Sep 2009 - This report illustrates the results of a China sourcing pilot on R&D categories conducted for a global
pharmaceutical company.
20170922231916 120
J-PECO is a third-party inspection company focusing on oil and gas products inspection including valves,fittings,steel pipes,pressure vessels,flow meters, metering skids, pumps and so on.The customers will get the finished reports with in 24 hours after the inspection.
http://www.qczoom.com/
More Related Content
What's hot
Mold solutions katalog a4 final
Mold Solutions is a company that specializes in plastic injection molds and other plastic processing tools. They have facilities in Serbia and China with over 75 employees and the capacity to produce 30-40 molds per month. Their molds can have up to 128 cavities and they produce multi-component and threaded molds up to 1,800 x 1,200 x 800 mm in size weighing up to 15 tons. They provide design for manufacturing reports, mold flow simulations, and weekly and trial reports to customers throughout the mold production process.
SG PROTOTYPE MANUFACTURER CO.,LIMITED
www.sgproto.com
We mainly engaged in a variety of household appliances appearance and internal structure Model maker/Rapid prototyping/Aluminum alloy Parts /Small batch production/electrical and electronic plastic shell production. The main production equipment has CNC machining center, the appendix equipment has lathe machine, milling machine, sand blasting machine, silk screen, pad printer, automatic spraying producing line. For the surface finishing, we have professional and experienced design&producing engineers.
224-1
This document is a registration record from January 29, 2014 for Permasteelisa South China Factory - Permasteelisa Gartner Testing Laboratory located in Dongguan City, Guangdong Province, China. It provides contact information for the laboratory manager Mr. Yeung Hung-fai and states that the laboratory performs accredited testing in the category of construction materials for internal use and is normally not available for public testing.
Sorbitan monooleate
Present in any research lab, there are various chemicals and equipment. In order to conduct different essential experiments, the devices are necessary. Without lab equipment, a chemistry lab cannot function effectively as to undertake the required experiments it would not be possible.
Disney And ICTI Approved Factory - Funny Toys Gift Limited
Funny Toys Gift Limited is a manufacturer and exporter of plastic, plush, electronic, and food toys located in China. It has 400 employees and manufactures toys for major customers like Disney and Walmart. The factory is ISO9001 certified and has passed ethical audits. It has the capacity to produce 12 million toys per month through processes like injection molding, printing, and assembly.
Viton cord
Unimax International Limited, a reputable manufacturer and exporter for various kinds of fluid sealing and thermal insulation products, such as compression packings, sealing gaskets, gasket sheets, rubber sheets, etc, is committed to supplying quality products with reasonable prices to the customers around the world.
new SDR plastic mould company presentation-2016
SDR Mold Technology is a 10-year-old Chinese company that specializes in plastic injection molds and molded parts. It has over 150 employees and a 40,000 square foot facility. The company aims to work closely with customers, meet tight deadlines, and provide high quality and cost-effective solutions for automotive, medical, and industrial parts. SDR has a proven track record, serving customers in various industries around the world.
Plastpro mf presentation_march_2018
Founded in the year 2015, we Plast-Pro Solutions [Pune] are known to be among the most eminent organizations involved in offering a broad array of Moldflow CAE, Plastic product design development, Mold Cooling Analysis and Optimization, Tooling feasibility Study and skilled design resources support.
P Shaped Rubber Seal By Accurate Rubber Corp
Looking for P-Shaped Rubber Seals? We manufacture extruded rubber p strips, p seals, p shaped door gaskets, p shape weather stripping in various sizes
My cv for Ndt2 (1)
Masam Waleed is seeking a role where he can apply his skills and education in metallurgical and materials engineering, which includes internship experience in casting and ordnance factories as well as coursework covering deformation, fracture, and non-destructive testing methods. He has a M.Sc. in Metallurgical and Materials Engineering from UET Lahore and technical interests in corrosion engineering, research and development, and standards like ASTM. Personal details note computer skills in MS Office and interests in sports, food, the gym, and chess.
What's hot (10)
Disney And ICTI Approved Factory - Funny Toys Gift Limited
Disney And ICTI Approved Factory - Funny Toys Gift Limited
Similar to Inspection report from Mirrored Cabidor on July 12th,2016
Face Mask Pre-shipment Inspection in China
Here is a sample report for Disposable Face Mask Pre-shipment Inspection in China that we did a few days ago, welcome to contact us for face mask quality control solutions in China & Asia
Global borosilicate glass industry 2017 market research report
This report analyzes the global borosilicate glass market from 2011-2022. Global demand for borosilicate glass increased from 857,177 metric tons in 2011 to 1,066,521 metric tons in 2015. China saw the largest growth in demand over this period, increasing from 520,068 metric tons in 2011 to 670,966 metric tons in 2015. The report covers the major manufacturers and analyzes production by region. It also examines demand trends by type (high and medium borosilicate glass tubes) and application (solar energy tubes, laboratory apparatus, etc.). The global market is projected to continue growing through 2022.
Global borosilicate glass industry 2017 market research report
This report analyzes the global borosilicate glass market from 2011-2022. Global demand for borosilicate glass increased from 857,177 metric tons in 2011 to 1,066,521 metric tons in 2015. China saw the largest growth in demand over this period, increasing from 520,068 metric tons in 2011 to 670,966 metric tons in 2015. The report covers the major manufacturers and analyzes production by region. It also examines demand trends by type (high and medium borosilicate glass tubes) and application (solar energy tubes, laboratory apparatus, etc.). The global market is projected to continue growing through 2022.
Sirris manufacturing day 2013 Nick Orchard
- The document discusses measurement of complex mechanical parts like gas turbine engine components. Precise measurement of dimensions and geometric features is important for form, fit and function.
- Improper measurement during manufacturing of an oil feed stub pipe for a Rolls-Royce Trent 900 engine led to a critically reduced wall thickness. This likely caused an in-flight engine failure on a Qantas Airbus A380.
- The investigation found issues with the manufacturing process and inspection that allowed a non-conforming part to be released and installed on the failed engine. Better measurement and inspection could have prevented this problem.
20220927 Analyze Contamination Metal On Cap.pptx
The document summarizes an investigation into metal contamination found inside plastic caps during production. Testing determined:
1) Small metal contaminants ranging from 0.3-0.6mm were found randomly located inside caps from injection unit 1. Further testing found increasing amounts of contamination over multiple cycles.
2) Trials using different plastic materials and process changes like removing movement still produced contamination, indicating the source was upstream.
3) Inspection of the melt found possible metal particles, and previous sample retains dating back months also contained contamination, suggesting a chronic issue with the material supply.
The root cause appears to be metal contamination entering the process upstream, possibly during material storage or feeding, and consistently contaminating production
Quality
The document discusses quality control requirements for various construction materials including aggregates, cement, water, admixtures and reinforcement steel. It outlines testing frequency and standards for each material to ensure quality. Key aspects covered include pre-qualification of suppliers, material certification, sampling, storage procedures, and testing of physical and chemical properties at regular intervals.
Mini Steel Plant (Billets and TMT Bar) How to Open Mini Steel plant (Billets...
This business plan can assist you with locating the ideal location, financing your new firm, and promoting your products if you're thinking of beginning a business producing billets and TMT bars. Every step of the way, we've developed this manual with the goal of arming you with the knowledge you need to launch and manage a profitable business in billets and TMT bars that will provide you with a respectable annual return on your investment. It is beneficial for your new company endeavor!
𝐂𝐨𝐧𝐭𝐚𝐜𝐭 𝐮𝐬
NIIR PROJECT CONSULTANCY SERVICES, DELHI
An ISO 9001:2015 Company
ENTREPRENEUR INDIA
106-E, Kamla Nagar, Opp. Mall ST,
New Delhi-110007, India.
Email: npcs.ei@gmail.com
info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886
Mobile: +91-9097075054, 8800733955
Website: https://www.entrepreneurindia.co
https://www.niir.org
Conexões e tubulaçães - Alfa Laval
Alfa Laval is a leading global provider of specialized tubes and fittings for demanding applications. Their sanitary range offers products suitable for most standard duties, while their UltraPure range has extra high demands on hygiene and cleanability. Alfa Laval focuses on corrosion resistance, dimensional accuracy, and structural integrity to ensure problem-free welding and assembly.
2012 deep research report on global and china glasses lens industry
This document is a 272-page research report from 2012 on the global and Chinese glasses lens industry. It provides an overview of the industry, including definitions and classifications of different lens types. It also describes lens manufacturing technologies, key global and Chinese manufacturers, production and market data from 2009-2016, as well as a feasibility analysis of a proposed 20 million piece/year resin lens project in China. In-depth information is provided on various aspects of the glasses lens industry through detailed tables, figures and analysis.
Pharmaceutical R&D China Sourcing Pilot Final Report
Sep 2009 - This report illustrates the results of a China sourcing pilot on R&D categories conducted for a global
pharmaceutical company.
20170922231916 120
J-PECO is a third-party inspection company focusing on oil and gas products inspection including valves,fittings,steel pipes,pressure vessels,flow meters, metering skids, pumps and so on.The customers will get the finished reports with in 24 hours after the inspection.
http://www.qczoom.com/
Similar to Inspection report from Mirrored Cabidor on July 12th,2016 (11)
Global borosilicate glass industry 2017 market research report
Global borosilicate glass industry 2017 market research report
Global borosilicate glass industry 2017 market research report
Global borosilicate glass industry 2017 market research report
Mini Steel Plant (Billets and TMT Bar) How to Open Mini Steel plant (Billets...
Mini Steel Plant (Billets and TMT Bar) How to Open Mini Steel plant (Billets...
2012 deep research report on global and china glasses lens industry
2012 deep research report on global and china glasses lens industry
Pharmaceutical R&D China Sourcing Pilot Final Report
Pharmaceutical R&D China Sourcing Pilot Final Report
Inspection report from Mirrored Cabidor on July 12th,2016
- 1. 1 CHINABIZCHECKUP-Your camera and eyes in the factory www.chinabizcheckup.com Supplier name KDK Inspection Date July 12th ,2016 PI/PO# N/A Inspector Evan Product name Mirrored Cabidor Determinant Passed Lot # Item Number Scheduled Qty(unit) Available Qty (unit) Sampled from packed Qty(unit) Sampled from unpacked Qty(unit) Acceptanc e & Packed Qty(unit) / Mirrored Cabidor 511 511 20 511 511 Total 511 511 20 511 511 Parts name Defect description Critical Major Minor Mirrored Cabidor Exposed nail in the hole 0 1 0 Dirty mark on the surface 0 0 6 Remark: The listed defects are found on site.And then they are reworked well by factory’s workers. QC Inspection Report Report No.: FS160712
- 2. 2 Defective Pictures (Mirrored Cabidor) Exposed nail in the hole--major Dirty mark--minor Dirty mark--Minor Dirty mark--Minor
- 3. 3 Dirty mark--minor Dirty mark--minor N/A Dirty mark--minor N/A Package & product details (Mirrored Cabidor) Finished goods from mirrored cabidor Finished goods from mirrored cabidor Carton view Label on the carton
- 4. 4 Carton view Label view Label view Label scanned Carton view Packing view
- 5. 5 Packing view Card board with five layers Packing view Packing view Packing view Packing view
- 6. 6 Packing view Packing view Accessories view Accessories view Warranty view Instruction book view
- 7. 7 Instruction book view Instruction book view Instruction book view Instruction book view Product view Product view
- 8. 8 Product view Plastic handle view Plastic handle view Product view Label view Holes view
- 9. 9 Product view Product view Product view in details Product view Product view Product view in details
- 10. 10 Product view Product view in details Product view in details Product view in details Product view in details Product view in details
- 11. 11 Product view Product view in details Product view in details Product view in details Product view Steel mounting bracket view
- 12. 12 Steel mounting bracket view Steel mounting bracket view Steel mounting bracket view Good match between lock and holes Measurement date and test from Mirrored Cabidor Size measurement Size measurement
- 13. 13 Size measurement Size measurement Size measurement Size measurement Gross weight check Gross weight show（19.5kgs）
- 14. 14 Net weight check Net weight show(16.5kgs) Size measurement Size measurement Size measurement Size measurement
- 15. 15 Size measurement Size measurement Size measurement Size measurement Size measurement Size measurement
- 16. 16 Size measurement Size measurement Size measurement Size measurement --------------------------------------------------------------------- End of Report -----------------------------------------------------------