This document provides information about measuring errors of analog and digital instruments. For analog instruments, accuracy is typically expressed as a percentage of the full scale reading. The error can be ±3% of the measured value if it is in the last third of the scale, but increases if further from the full scale value. Digital multimeters have resolution defined by the number of display digits, such as ±0.05% for 31⁄2 digits. They may also have automatic or manual range selection to ensure accurate readings in the optimal scale region.
Osnove elektrotehnike vežbe gradivo za 2. test
Literatura
Nadica Miljkovic ETF Instrumentacija za elektricna merenja
M.Mitrovic, A. Zekic, FF, Didaktika fizike
INternet
This document provides information about measuring errors of analog and digital instruments. For analog instruments, accuracy is typically expressed as a percentage of the full scale reading. The error can be ±3% of the measured value if it is in the last third of the scale, but increases if further from the full scale value. Digital multimeters have resolution defined by the number of display digits, such as ±0.05% for 31⁄2 digits. They may also have automatic or manual range selection to ensure accurate readings in the optimal scale region.
Osnove elektrotehnike vežbe gradivo za 2. test
Literatura
Nadica Miljkovic ETF Instrumentacija za elektricna merenja
M.Mitrovic, A. Zekic, FF, Didaktika fizike
INternet
Informatika 5 3 cas rad sa tekstom _ unos i editovanje teksta
1. Рад са текстом – унос и едитовање
текста (обнављање)
6. разред, час 3.
Приредио: Синиша Д. Ћулафић
2. Рад са текстом – унос и едитовање
текста
• Градиво 5. разреда
• Унос текста. Дигитални правопис.
• Уређивање и обликовање текстуалног
документа.
• Чување текстуалног документа.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34. Форматирање карактера
• Текст се састоји из слова,
бројева и симбола, које
заједничким именом називамо
карактери. Скуп карактера који
су истог изгледа представља
једну врсту знакова за писање
текста на рачунару која се
назива фонт. У сваком рачунару
постоји више различитих
фонтова. Сваки фонт има своје
име (на пример, Arial, Times
New Roman, Calibri). Карактери
се обично подешавају у групи
Font картице Home.
• У основна подешавања спадају
избор фонта, величине и боје
знакова. У тексту се могу
подесити и различити стилови.
Уз уобичајен стил, за истицање
појединих делова текста могу
се користити подебљана слова
(енгл. bold) – B, искошена слова
(енгл. italic) – I или подвучена
слова (енгл. underline) – U, као и
њихове комбинације. Величина
слова обично се изражава у
тачкама (енгл. point, pt), а 72 pt
износи 1 инч, што је приближно
2,54 cm.