IATA - DGR Diploma - NM
•
2 likes•800 views
This document is a diploma awarded to Miklos Nagy in March 2012 for passing the IATA Dangerous Goods Regulations - Initial course, which qualifies him as Category 3 personnel according to Table 1.5.A of the IATA Dangerous Goods Regulations. The diploma was issued by Guido Gianasso, Vice President of Human Capital at the IATA Training & Development Institute.
Report
Share
Report
Share
Download to read offline
Recommended
Global CISO Summit India 2015
The document announces EC-Council's 6th CISO Summit to take place on August 1st, 2015 in Pune, India. The summit will bring together CISOs from around the world to discuss real cybersecurity threats and how leading organizations have implemented strategies to address complicated security challenges. Past speakers at the event have included CISOs from large companies discussing topics such as secure cloud adoption, countermeasure culture, and maturity measurement. The organizing committee and agenda for the event are provided.
IATA Dangerous Goods By Air Training Courses
The document advertises IATA dangerous goods by air training courses in the UK and Europe provided by www.llewellyneurope.com. It notes that it is a legal requirement for those involved in consigning, handling, or packaging dangerous goods by air to have IATA qualification. Initial training courses last 3 days and cover topics such as classification, packaging, and documentation, while refresher courses every 24 months refresh existing knowledge. Upon completion, certification is provided that is required to legally ship dangerous goods by air.
IATA Dangerous Goods Regulations
This document provides an overview of the International Air Transport Association (IATA) and their Dangerous Goods Regulations (DGR) manual. IATA was formed in 1945 and represents over 200 airlines. Their main aims are to provide safe and secure air transportation. The DGR defines dangerous goods and provides classification, packaging, labeling and handling requirements to safely transport dangerous goods by air. It is based on United Nations recommendations and ICAO technical instructions. The DGR aims to minimize risks to health, safety, property and the environment from dangerous goods transported by air.
Rab
Presentatie van de Robotics Association Benelux tijdens het congres automatisering in de metaal dinsdag 26 januari 2010.
Organisatie Mikrocentrum
Hazardous Materials Certification Training Part 2
A comprehensive walkthrough of Title 49 of the Code of Federal Regulations as well as IATA. The presentation was made for AAA Molybdenum Products, Inc. and it was meant to train employees on the most common hazardous materials used at the company. Disclaimer: most of the information is still pertinent, but updates to the Code always occur. Please make sure you are using the most up-to-date versions of your CFR 49 manual and IATA manual.
Dgr for crewmember 2016 recurrent
This document provides an overview of dangerous goods regulations for transportation by air. It outlines the objectives of dangerous goods training which include identifying dangerous goods and their classes, understanding regulations and philosophy, recognizing labels, and emergency response procedures. It then details the 9 classes of dangerous goods and their divisions and hazards. The document emphasizes that the shipper bears primary responsibility for classifying, packing, marking and documenting dangerous goods in accordance with regulations. It explains that key documents for transporting dangerous goods include the shipper's declaration, notification to the pilot, and material safety data sheets.
Recommended
Global CISO Summit India 2015
The document announces EC-Council's 6th CISO Summit to take place on August 1st, 2015 in Pune, India. The summit will bring together CISOs from around the world to discuss real cybersecurity threats and how leading organizations have implemented strategies to address complicated security challenges. Past speakers at the event have included CISOs from large companies discussing topics such as secure cloud adoption, countermeasure culture, and maturity measurement. The organizing committee and agenda for the event are provided.
IATA Dangerous Goods By Air Training Courses
The document advertises IATA dangerous goods by air training courses in the UK and Europe provided by www.llewellyneurope.com. It notes that it is a legal requirement for those involved in consigning, handling, or packaging dangerous goods by air to have IATA qualification. Initial training courses last 3 days and cover topics such as classification, packaging, and documentation, while refresher courses every 24 months refresh existing knowledge. Upon completion, certification is provided that is required to legally ship dangerous goods by air.
IATA Dangerous Goods Regulations
This document provides an overview of the International Air Transport Association (IATA) and their Dangerous Goods Regulations (DGR) manual. IATA was formed in 1945 and represents over 200 airlines. Their main aims are to provide safe and secure air transportation. The DGR defines dangerous goods and provides classification, packaging, labeling and handling requirements to safely transport dangerous goods by air. It is based on United Nations recommendations and ICAO technical instructions. The DGR aims to minimize risks to health, safety, property and the environment from dangerous goods transported by air.
Rab
Presentatie van de Robotics Association Benelux tijdens het congres automatisering in de metaal dinsdag 26 januari 2010.
Organisatie Mikrocentrum
Hazardous Materials Certification Training Part 2
A comprehensive walkthrough of Title 49 of the Code of Federal Regulations as well as IATA. The presentation was made for AAA Molybdenum Products, Inc. and it was meant to train employees on the most common hazardous materials used at the company. Disclaimer: most of the information is still pertinent, but updates to the Code always occur. Please make sure you are using the most up-to-date versions of your CFR 49 manual and IATA manual.
Dgr for crewmember 2016 recurrent
This document provides an overview of dangerous goods regulations for transportation by air. It outlines the objectives of dangerous goods training which include identifying dangerous goods and their classes, understanding regulations and philosophy, recognizing labels, and emergency response procedures. It then details the 9 classes of dangerous goods and their divisions and hazards. The document emphasizes that the shipper bears primary responsibility for classifying, packing, marking and documenting dangerous goods in accordance with regulations. It explains that key documents for transporting dangerous goods include the shipper's declaration, notification to the pilot, and material safety data sheets.
Dangerous Goods Training- awareness
This document provides an overview of dangerous goods regulations. It defines key organizations like IATA and key terms like overpack. It describes shipper and operator responsibilities. Nine hazard classes are described including examples like explosives, gases, and corrosives. Proper packaging, marking, labeling and documentation like the shipper's declaration are outlined. Classification identifies the hazard and packing group. Regulations cover packing methods, UN codes, and permitted dangerous goods on passengers.
Robotic welding
These slide gives overall welding process and gives the tips about the robotic welding process and then adaptability with the industrial welding robotic coordinates.
Marine engineering i
This document discusses marine vehicles and their applications and limitations. It begins by introducing how transportation needs have evolved with globalization. It then explains that marine transportation differs from land transportation due to the influence of the sea on politics, economy, culture, and security. Finally, it outlines three main applications of marine vehicles: 1) as links in transportation systems, considering factors like payload, speed, and costs, 2) as mobile naval bases designed around military requirements, and 3) as special purpose vehicles for tasks like research, salvage, dredging, and ferries.
Welding Robots
Robot Welding is a process of joining different materials.
The large bulk of materials that are welded are metals and their alloys although welding is also applied to the joining of other materials such as thermoplastics.
Presentation on dgr
This document discusses the safe transportation of dangerous goods by air. It provides definitions and outlines the relevant legislation. It identifies deficiencies that could lead to accidents, such as lack of training, negligence, and undeclared dangerous goods. The document examines past accidents caused by undeclared chemical oxygen generators, acids, flammable liquids and paints. It stresses the importance of proper classification, declaration, packaging, and training to prevent such incidents and ensure safety.
Aircraft maintenance programme
The document discusses aircraft maintenance programmes and their importance in airworthiness management. It defines a maintenance programme as a schedule of maintenance tasks with documented management procedures. It notes key information sources for maintenance programmes include the MPD, CMM, SBs, and STCs. Approval of maintenance programmes may be issued to Sub Part G organisations. Effective maintenance programme management requires qualified specialists, applicable procedures, and oversight functions. Programmes aim to optimize maintenance tasks through reliability monitoring and review.
5.15 Typical electronic digital aircraft systems
This document provides an overview of typical electronic and digital aircraft systems. It discusses computer maintenance systems, ACARS, EFIS, EICAS/ECAM, fly-by-wire, flight management systems, GPS, inertial navigation systems, traffic collision avoidance systems, and flight data recorders. It also describes built-in test equipment, on-board maintenance facilities, and how various systems monitor aircraft data and perform tests. Finally, it provides details on electronic flight instrument systems, cockpit displays, and how fly-by-wire replaces manual flight controls with electronic signaling.
Airline Business Models and Competitive Strategies - virtual simulation course
Airline Business Models and Competitive Strategies - virtual simulation courseIATA Training & Development Institute
This virtual simulation program was developed to help airline management teams understand competitive market dynamics and improve problem solving and decision-making skills.
Find out more at: http://www.iata.org/airline-business-simulationppt on Triangles Class 9
1. The document defines triangles and their properties including three sides, three angles, and three vertices.
2. It explains five criteria for determining if two triangles are congruent: side-angle-side (SAS), angle-side-angle (ASA), angle-angle-side (AAS), side-side-side (SSS), and right-angle-hypotenuse-side (RHS).
3. Some properties of triangles discussed are: angles opposite equal sides are equal, sides opposite equal angles are equal, and the sum of any two sides is greater than the third side.
Test Automation - Principles and Practices
This document discusses principles and practices for test automation. It covers topics like different levels of testing from unit to integration to UI, the importance of testing non-functional requirements, using a test pyramid approach with more unit and component tests than UI tests. It also discusses practices like continuous integration, test automation framework design considerations, sample framework architectures, and page object patterns. The overall goal is to provide guidance on building quality into software through effective test automation practices.
Culture in vitro des plantes
Les techniques de culture in vitro cherchent à contrôler les facteurs de l’environnement (température, lumière, composition du milieu…) du fragment de plante mis en culture afin de l’orienter vers un programme d’évolution déterminé.
Dimensionnement de plateforme de stockage
calcule des raques de stockages selon la methode Michel Roux
Automated vehicles and transport systems
The document discusses the potential impacts and implications of automated vehicles (AVs) and shared mobility on transportation systems and urban planning. It describes several issues with the current personal vehicle paradigm such as traffic congestion, pollution, and wasted resources. It then outlines how AVs and shared mobility services could help address these issues by reducing the number of vehicles needed and changing models from personal ownership to shared use. The document presents several scenarios for what transportation might look like in different cities circa 2030 with widespread adoption of AVs and shared mobility."
More Related Content
Viewers also liked
Dangerous Goods Training- awareness
This document provides an overview of dangerous goods regulations. It defines key organizations like IATA and key terms like overpack. It describes shipper and operator responsibilities. Nine hazard classes are described including examples like explosives, gases, and corrosives. Proper packaging, marking, labeling and documentation like the shipper's declaration are outlined. Classification identifies the hazard and packing group. Regulations cover packing methods, UN codes, and permitted dangerous goods on passengers.
Robotic welding
These slide gives overall welding process and gives the tips about the robotic welding process and then adaptability with the industrial welding robotic coordinates.
Marine engineering i
This document discusses marine vehicles and their applications and limitations. It begins by introducing how transportation needs have evolved with globalization. It then explains that marine transportation differs from land transportation due to the influence of the sea on politics, economy, culture, and security. Finally, it outlines three main applications of marine vehicles: 1) as links in transportation systems, considering factors like payload, speed, and costs, 2) as mobile naval bases designed around military requirements, and 3) as special purpose vehicles for tasks like research, salvage, dredging, and ferries.
Welding Robots
Robot Welding is a process of joining different materials.
The large bulk of materials that are welded are metals and their alloys although welding is also applied to the joining of other materials such as thermoplastics.
Presentation on dgr
This document discusses the safe transportation of dangerous goods by air. It provides definitions and outlines the relevant legislation. It identifies deficiencies that could lead to accidents, such as lack of training, negligence, and undeclared dangerous goods. The document examines past accidents caused by undeclared chemical oxygen generators, acids, flammable liquids and paints. It stresses the importance of proper classification, declaration, packaging, and training to prevent such incidents and ensure safety.
Aircraft maintenance programme
The document discusses aircraft maintenance programmes and their importance in airworthiness management. It defines a maintenance programme as a schedule of maintenance tasks with documented management procedures. It notes key information sources for maintenance programmes include the MPD, CMM, SBs, and STCs. Approval of maintenance programmes may be issued to Sub Part G organisations. Effective maintenance programme management requires qualified specialists, applicable procedures, and oversight functions. Programmes aim to optimize maintenance tasks through reliability monitoring and review.
5.15 Typical electronic digital aircraft systems
This document provides an overview of typical electronic and digital aircraft systems. It discusses computer maintenance systems, ACARS, EFIS, EICAS/ECAM, fly-by-wire, flight management systems, GPS, inertial navigation systems, traffic collision avoidance systems, and flight data recorders. It also describes built-in test equipment, on-board maintenance facilities, and how various systems monitor aircraft data and perform tests. Finally, it provides details on electronic flight instrument systems, cockpit displays, and how fly-by-wire replaces manual flight controls with electronic signaling.
Airline Business Models and Competitive Strategies - virtual simulation course
Airline Business Models and Competitive Strategies - virtual simulation courseIATA Training & Development Institute
This virtual simulation program was developed to help airline management teams understand competitive market dynamics and improve problem solving and decision-making skills.
Find out more at: http://www.iata.org/airline-business-simulationppt on Triangles Class 9
1. The document defines triangles and their properties including three sides, three angles, and three vertices.
2. It explains five criteria for determining if two triangles are congruent: side-angle-side (SAS), angle-side-angle (ASA), angle-angle-side (AAS), side-side-side (SSS), and right-angle-hypotenuse-side (RHS).
3. Some properties of triangles discussed are: angles opposite equal sides are equal, sides opposite equal angles are equal, and the sum of any two sides is greater than the third side.
Test Automation - Principles and Practices
This document discusses principles and practices for test automation. It covers topics like different levels of testing from unit to integration to UI, the importance of testing non-functional requirements, using a test pyramid approach with more unit and component tests than UI tests. It also discusses practices like continuous integration, test automation framework design considerations, sample framework architectures, and page object patterns. The overall goal is to provide guidance on building quality into software through effective test automation practices.
Culture in vitro des plantes
Les techniques de culture in vitro cherchent à contrôler les facteurs de l’environnement (température, lumière, composition du milieu…) du fragment de plante mis en culture afin de l’orienter vers un programme d’évolution déterminé.
Dimensionnement de plateforme de stockage
calcule des raques de stockages selon la methode Michel Roux
Automated vehicles and transport systems
The document discusses the potential impacts and implications of automated vehicles (AVs) and shared mobility on transportation systems and urban planning. It describes several issues with the current personal vehicle paradigm such as traffic congestion, pollution, and wasted resources. It then outlines how AVs and shared mobility services could help address these issues by reducing the number of vehicles needed and changing models from personal ownership to shared use. The document presents several scenarios for what transportation might look like in different cities circa 2030 with widespread adoption of AVs and shared mobility."
Viewers also liked (14)
Airline Business Models and Competitive Strategies - virtual simulation course
Airline Business Models and Competitive Strategies - virtual simulation course
IATA - DGR Diploma - NM
- 1. DIPLOMA awarded to Miklos Nagy who passed IATA Dangerous Goods Regulations - Initial (for Category 3 personnel as per Table 1.5.A of the IATA Dangerous Goods Regulations) Montreal, March 2012 DL~ Guido Gianasso, Vice President Human Capital 87972 HU IATA Training & Development Institute KNOWLEDGE· EXPERIENCE • NETWORKING • SKILLS • RESULTS 4 ~~Uf oo.o 1.o