I agree! Thank you for the image! .pdf
•
0 likes•2 views
This short correspondence expresses agreement and thanks for sharing an image between two parties. Both parties agree and the sender thanks the recipient for sharing an image with them.
Report
Share
Report
Share
Download to read offline
Recommended
y = 22Solutiony = 22.pdf
This short document defines the variable y and assigns it the value of 22. No further calculations or explanations are provided.
what ways are quorum sensing and the two component signaling system .pdf
what ways are quorum sensing and the two component signaling system in bacteria similar?
First we will see What is quorum sensing (QS). QS is a cell to cell communication in bacteria
that involve signaling molecules or autoinducers (AIs).
AIs come in different forms depending on bacterial species.
As one would expect, the molecular mechanism of QS is dependent on species, but there are four
main characteristics that govern all QS systems:
At low bacterial cell density (LBCD), AIs diffuse away and their cellular concentration is
approximately the same as the environment.
At high bacterial cell density (HBCD), there is a cumulative production of AIs, which leads to a
local high (environment) concentration. This is detected by the cells which in turn trigger
different kinds of responses.
AIs are detected by receptors that are either transmembrane molecules or are present in the
cytoplasm.
Detection of AIs leads to further production of AIs (feed forward loop) in addition to activating
other genes.
Qouram sensing and two component signaling system are inter connected and we will check how
it is connected: Cell-density-dependent gene expression appears to be widely spread in bacteria.
This quorum-sensing phenomenon has been well established in Gram-negative bacteria, where
N-acyl homoserine lactones are the diffusible communication molecules that modulate cell-
density-dependent phenotypes. Similarly, a variety of processes are known to be regulated in a
cell-density- or growth-phase-dependent manner in Gram-positive bacteria. Examples of such
quorum-sensing modes in Gram-positive bacteria are the development of genetic competence in
Bacillus subtilis andStreptococcus pneumoniae, the virulence response in Staphylococcus aureus,
and the production of antimicrobial peptides by several species of Gram-positive bacteria
including lactic acid bacteria. Cell-density-dependent regulatory modes in these systems appear
to follow a common theme, in which the signal molecule is a post-translationally processed
peptide that is secreted by a dedicated ATP-binding-cassette exporter. This secreted peptide
pheromone functions as the input signal for a specific sensor component of a two-component
signal-transduction system. Moreover, genetic linkage of the common elements involved results
in autoregulation of peptide-pheromone production.
What advantages would an enzyme coupled receptor have over a G-coupled receptor?
To understand the advantage of Enzyme-linked receptors over G-Protein Linked Receptors, we
have to see how these both types of receptors function in cellular level.
G-Protein Linked Receptors
G-protein-linked receptors bind a ligand and activate a membrane protein called a G-protein. The
activated G-protein then interacts with either an ion channel or an enzyme in the membrane. All
G-protein-linked receptors have seven transmembrane domains, but each receptor has its own
specific extracellular domain and G-protein-binding site.
Cell signaling using G.
Average.javaimport java.util.Scanner; import java.util.Arra.pdf
// Average.java
import java.util.Scanner;
import java.util.ArrayList;
public class Average
{
private double mean;
private int [] data;
public Average()
{
Scanner scan = new Scanner(System.in);
//Create an array with 5 elements.
data = new int[5];
//input the data into the array
for (int i = 0; i < data.length; i++)
{
System.out.print(\"Enter your score for test #\" + (i +1) + \": \");
data[i] = scan.nextInt();
}
}
public void calculateMean()
{
double sum = 0; //Accumulator
//calculate the sum of the test scores in the data array.
for (int i = 0; i < data.length; i++)
sum += data[i];
mean = (Double)sum/data.length;
}
public String toString()
{
String result = \"\ The data stored in array: \";
for (int i = 0; i < data.length; i++)
result = result + data[i] + \" \";
result = result + \"\ \" + \"Average: \" + mean + \"\ \";
return result;
}
}
// AverageDriver.java
public class AverageDriver
{
public static void main(String[] args)
{
Average avg = new Average();
avg.calculateMean();
System.out.println(avg.toString());
}
}
/*
output:
Enter your score for test #1: 87
Enter your score for test #2: 90
Enter your score for test #3: 92
Enter your score for test #4: 77
Enter your score for test #5: 89
The data stored in array: 87 90 92 77 89
Average: 87.0
*/
Solution
// Average.java
import java.util.Scanner;
import java.util.ArrayList;
public class Average
{
private double mean;
private int [] data;
public Average()
{
Scanner scan = new Scanner(System.in);
//Create an array with 5 elements.
data = new int[5];
//input the data into the array
for (int i = 0; i < data.length; i++)
{
System.out.print(\"Enter your score for test #\" + (i +1) + \": \");
data[i] = scan.nextInt();
}
}
public void calculateMean()
{
double sum = 0; //Accumulator
//calculate the sum of the test scores in the data array.
for (int i = 0; i < data.length; i++)
sum += data[i];
mean = (Double)sum/data.length;
}
public String toString()
{
String result = \"\ The data stored in array: \";
for (int i = 0; i < data.length; i++)
result = result + data[i] + \" \";
result = result + \"\ \" + \"Average: \" + mean + \"\ \";
return result;
}
}
// AverageDriver.java
public class AverageDriver
{
public static void main(String[] args)
{
Average avg = new Average();
avg.calculateMean();
System.out.println(avg.toString());
}
}
/*
output:
Enter your score for test #1: 87
Enter your score for test #2: 90
Enter your score for test #3: 92
Enter your score for test #4: 77
Enter your score for test #5: 89
The data stored in array: 87 90 92 77 89
Average: 87.0
*/.
C. 0.20 M NaCl Solution C..pdf
This document describes a 0.20 M NaCl solution. A 0.20 M NaCl solution contains 0.20 moles of sodium chloride dissolved in 1 liter of water. This concentration of sodium chloride solution is commonly used in chemistry experiments and labs.
yep in water which is higly polar will dissolve i.pdf
yep in water which is higly polar will dissolve ionic NaCl but not nonpolar steric
acid yes
Solution
yep in water which is higly polar will dissolve ionic NaCl but not nonpolar steric
acid yes.
When thinking of E or Z, the first thing that com.pdf
When thinking of E or Z, the first thing that comes to mind is the double bond of
the alkene. From there, you look at the atom attach to the double bond of the alkene. There are 4
atoms: 1) Carbon (top left) : bonded to 1 carbon and 2 hydrogen 2) Carbon (bottom left) : bonded
to 2 Oxygen [treat double bond here as two bonds] and 1 Hydrogen 3) Carbon (top right) :
bonded to 2 carbon and 1 hydrogen 4) Hydrogen (bottom right) : bonded to nothing. On each
side of the double bond, rank the priority (with respect to molecular mass) Bottom left >> Top
left Top right >> bottom right since the two groups are trans each other, this is an E isomer
Solution
When thinking of E or Z, the first thing that comes to mind is the double bond of
the alkene. From there, you look at the atom attach to the double bond of the alkene. There are 4
atoms: 1) Carbon (top left) : bonded to 1 carbon and 2 hydrogen 2) Carbon (bottom left) : bonded
to 2 Oxygen [treat double bond here as two bonds] and 1 Hydrogen 3) Carbon (top right) :
bonded to 2 carbon and 1 hydrogen 4) Hydrogen (bottom right) : bonded to nothing. On each
side of the double bond, rank the priority (with respect to molecular mass) Bottom left >> Top
left Top right >> bottom right since the two groups are trans each other, this is an E isomer.
Since it contains oxygen double bonded to a carbo.pdf
Since it contains oxygen double bonded to a carbon atom , it may beCaboxylic acid
or carbonyl compound. So the characteristic IRabsorption band is aroud 1700 cm -1
Solution
Since it contains oxygen double bonded to a carbon atom , it may beCaboxylic acid
or carbonyl compound. So the characteristic IRabsorption band is aroud 1700 cm -1.
Recommended
y = 22Solutiony = 22.pdf
This short document defines the variable y and assigns it the value of 22. No further calculations or explanations are provided.
what ways are quorum sensing and the two component signaling system .pdf
what ways are quorum sensing and the two component signaling system in bacteria similar?
First we will see What is quorum sensing (QS). QS is a cell to cell communication in bacteria
that involve signaling molecules or autoinducers (AIs).
AIs come in different forms depending on bacterial species.
As one would expect, the molecular mechanism of QS is dependent on species, but there are four
main characteristics that govern all QS systems:
At low bacterial cell density (LBCD), AIs diffuse away and their cellular concentration is
approximately the same as the environment.
At high bacterial cell density (HBCD), there is a cumulative production of AIs, which leads to a
local high (environment) concentration. This is detected by the cells which in turn trigger
different kinds of responses.
AIs are detected by receptors that are either transmembrane molecules or are present in the
cytoplasm.
Detection of AIs leads to further production of AIs (feed forward loop) in addition to activating
other genes.
Qouram sensing and two component signaling system are inter connected and we will check how
it is connected: Cell-density-dependent gene expression appears to be widely spread in bacteria.
This quorum-sensing phenomenon has been well established in Gram-negative bacteria, where
N-acyl homoserine lactones are the diffusible communication molecules that modulate cell-
density-dependent phenotypes. Similarly, a variety of processes are known to be regulated in a
cell-density- or growth-phase-dependent manner in Gram-positive bacteria. Examples of such
quorum-sensing modes in Gram-positive bacteria are the development of genetic competence in
Bacillus subtilis andStreptococcus pneumoniae, the virulence response in Staphylococcus aureus,
and the production of antimicrobial peptides by several species of Gram-positive bacteria
including lactic acid bacteria. Cell-density-dependent regulatory modes in these systems appear
to follow a common theme, in which the signal molecule is a post-translationally processed
peptide that is secreted by a dedicated ATP-binding-cassette exporter. This secreted peptide
pheromone functions as the input signal for a specific sensor component of a two-component
signal-transduction system. Moreover, genetic linkage of the common elements involved results
in autoregulation of peptide-pheromone production.
What advantages would an enzyme coupled receptor have over a G-coupled receptor?
To understand the advantage of Enzyme-linked receptors over G-Protein Linked Receptors, we
have to see how these both types of receptors function in cellular level.
G-Protein Linked Receptors
G-protein-linked receptors bind a ligand and activate a membrane protein called a G-protein. The
activated G-protein then interacts with either an ion channel or an enzyme in the membrane. All
G-protein-linked receptors have seven transmembrane domains, but each receptor has its own
specific extracellular domain and G-protein-binding site.
Cell signaling using G.
Average.javaimport java.util.Scanner; import java.util.Arra.pdf
// Average.java
import java.util.Scanner;
import java.util.ArrayList;
public class Average
{
private double mean;
private int [] data;
public Average()
{
Scanner scan = new Scanner(System.in);
//Create an array with 5 elements.
data = new int[5];
//input the data into the array
for (int i = 0; i < data.length; i++)
{
System.out.print(\"Enter your score for test #\" + (i +1) + \": \");
data[i] = scan.nextInt();
}
}
public void calculateMean()
{
double sum = 0; //Accumulator
//calculate the sum of the test scores in the data array.
for (int i = 0; i < data.length; i++)
sum += data[i];
mean = (Double)sum/data.length;
}
public String toString()
{
String result = \"\ The data stored in array: \";
for (int i = 0; i < data.length; i++)
result = result + data[i] + \" \";
result = result + \"\ \" + \"Average: \" + mean + \"\ \";
return result;
}
}
// AverageDriver.java
public class AverageDriver
{
public static void main(String[] args)
{
Average avg = new Average();
avg.calculateMean();
System.out.println(avg.toString());
}
}
/*
output:
Enter your score for test #1: 87
Enter your score for test #2: 90
Enter your score for test #3: 92
Enter your score for test #4: 77
Enter your score for test #5: 89
The data stored in array: 87 90 92 77 89
Average: 87.0
*/
Solution
// Average.java
import java.util.Scanner;
import java.util.ArrayList;
public class Average
{
private double mean;
private int [] data;
public Average()
{
Scanner scan = new Scanner(System.in);
//Create an array with 5 elements.
data = new int[5];
//input the data into the array
for (int i = 0; i < data.length; i++)
{
System.out.print(\"Enter your score for test #\" + (i +1) + \": \");
data[i] = scan.nextInt();
}
}
public void calculateMean()
{
double sum = 0; //Accumulator
//calculate the sum of the test scores in the data array.
for (int i = 0; i < data.length; i++)
sum += data[i];
mean = (Double)sum/data.length;
}
public String toString()
{
String result = \"\ The data stored in array: \";
for (int i = 0; i < data.length; i++)
result = result + data[i] + \" \";
result = result + \"\ \" + \"Average: \" + mean + \"\ \";
return result;
}
}
// AverageDriver.java
public class AverageDriver
{
public static void main(String[] args)
{
Average avg = new Average();
avg.calculateMean();
System.out.println(avg.toString());
}
}
/*
output:
Enter your score for test #1: 87
Enter your score for test #2: 90
Enter your score for test #3: 92
Enter your score for test #4: 77
Enter your score for test #5: 89
The data stored in array: 87 90 92 77 89
Average: 87.0
*/.
C. 0.20 M NaCl Solution C..pdf
This document describes a 0.20 M NaCl solution. A 0.20 M NaCl solution contains 0.20 moles of sodium chloride dissolved in 1 liter of water. This concentration of sodium chloride solution is commonly used in chemistry experiments and labs.
yep in water which is higly polar will dissolve i.pdf
yep in water which is higly polar will dissolve ionic NaCl but not nonpolar steric
acid yes
Solution
yep in water which is higly polar will dissolve ionic NaCl but not nonpolar steric
acid yes.
When thinking of E or Z, the first thing that com.pdf
When thinking of E or Z, the first thing that comes to mind is the double bond of
the alkene. From there, you look at the atom attach to the double bond of the alkene. There are 4
atoms: 1) Carbon (top left) : bonded to 1 carbon and 2 hydrogen 2) Carbon (bottom left) : bonded
to 2 Oxygen [treat double bond here as two bonds] and 1 Hydrogen 3) Carbon (top right) :
bonded to 2 carbon and 1 hydrogen 4) Hydrogen (bottom right) : bonded to nothing. On each
side of the double bond, rank the priority (with respect to molecular mass) Bottom left >> Top
left Top right >> bottom right since the two groups are trans each other, this is an E isomer
Solution
When thinking of E or Z, the first thing that comes to mind is the double bond of
the alkene. From there, you look at the atom attach to the double bond of the alkene. There are 4
atoms: 1) Carbon (top left) : bonded to 1 carbon and 2 hydrogen 2) Carbon (bottom left) : bonded
to 2 Oxygen [treat double bond here as two bonds] and 1 Hydrogen 3) Carbon (top right) :
bonded to 2 carbon and 1 hydrogen 4) Hydrogen (bottom right) : bonded to nothing. On each
side of the double bond, rank the priority (with respect to molecular mass) Bottom left >> Top
left Top right >> bottom right since the two groups are trans each other, this is an E isomer.
Since it contains oxygen double bonded to a carbo.pdf
Since it contains oxygen double bonded to a carbon atom , it may beCaboxylic acid
or carbonyl compound. So the characteristic IRabsorption band is aroud 1700 cm -1
Solution
Since it contains oxygen double bonded to a carbon atom , it may beCaboxylic acid
or carbonyl compound. So the characteristic IRabsorption band is aroud 1700 cm -1.
salicylic acid alcohol (R-OH) and carboxylic aci.pdf
salicylic acid: alcohol (R-OH) and carboxylic acid (R-COOH) acetylsalicylic acid
(aspirin): carboxylic acid and ester (R-COOR)
Solution
salicylic acid: alcohol (R-OH) and carboxylic acid (R-COOH) acetylsalicylic acid
(aspirin): carboxylic acid and ester (R-COOR).
no it doesnot .pdf
This very short document does not seem to provide any clear information that can be summarized in 3 sentences or less. It contains the phrase "no it doesnot" repeated but no other context or details.
It would be Ruthenium (II) Sulfide Ruthenium is .pdf
It would be Ruthenium (II) Sulfide Ruthenium is a transition metal, meaning that it
can have multiple oxidation numbers. Sulfur always takes the charge of -2, so from that we see
that there is a 1 to 1 relation between Ru and S in the empirical formula, so that means that
Ruthenium has the opposite charge, +2.
Solution
It would be Ruthenium (II) Sulfide Ruthenium is a transition metal, meaning that it
can have multiple oxidation numbers. Sulfur always takes the charge of -2, so from that we see
that there is a 1 to 1 relation between Ru and S in the empirical formula, so that means that
Ruthenium has the opposite charge, +2..
ketones do not give tollens test.. hence no react.pdf
ketones do not give tollens test.. hence no reaction
Solution
ketones do not give tollens test.. hence no reaction.
for IONIC the metal name followed by nonmetal io.pdf
for IONIC: the metal name followed by nonmetal ion (-ide) for ex: NaCl is Sodium
Chloride or MgS is Magnesium Sulfide
Solution
for IONIC: the metal name followed by nonmetal ion (-ide) for ex: NaCl is Sodium
Chloride or MgS is Magnesium Sulfide.
pH = 4-log2.4 = 3.62 pOH 14 - pH = 14-3.62 = 10.3.pdf
pH = 4-log2.4 = 3.62 pOH 14 - pH = 14-3.62 = 10.38 concentration of OH- = 10^(-
14) / (2.4*10^(-4)) = 4.167* 10^(-11)
Solution
pH = 4-log2.4 = 3.62 pOH 14 - pH = 14-3.62 = 10.38 concentration of OH- = 10^(-
14) / (2.4*10^(-4)) = 4.167* 10^(-11).
This suggest that dissociation of FeCl3 is 100 .pdf
This suggest that dissociation of FeCl3 is 100 % to form 4 ions (1Fe+3Cl). Other
dissociation also may be possible like FeCl3---->(FeCl2) + Cl- FeCl3---->(FeCl)2+ + 2Cl- so
number of ions is averaged considering dissociation constants which is 3.4
Solution
This suggest that dissociation of FeCl3 is 100 % to form 4 ions (1Fe+3Cl). Other
dissociation also may be possible like FeCl3---->(FeCl2) + Cl- FeCl3---->(FeCl)2+ + 2Cl- so
number of ions is averaged considering dissociation constants which is 3.4.
Total probability of dot received P = (37)(78).pdf
Total probability of dot received P = (3/7)*(7/8)+(4/7)*(1/8)=0.4464 probability
that dot sentP1 = 3/7=0.4285 so P(dot sent | dot received).= P1/P=0.4285/.4464=0.96
Solution
Total probability of dot received P = (3/7)*(7/8)+(4/7)*(1/8)=0.4464 probability
that dot sentP1 = 3/7=0.4285 so P(dot sent | dot received).= P1/P=0.4285/.4464=0.96.
Environmental contaminants of recent concern are .pdf
Environmental contaminants of recent concern are pharmaceuticals, estrogens and
other endocrine disrupting chemicals (EDC) such as degradation products of surfactants, algal
and cyanobacterial toxins, disinfection by-products (DBPs) and metalloids. In addition,
pesticides (especially their transformation products), microorganisms, and humic substances
(HS), in their function as vehicles for contaminants and as precursors for by-products in water
treatment, traditionally play an important role. The present status of the application of LC-MS
techniques for these water constituents are discussed and examples of application are given.
Solid-phase extraction with various non-selective materials in combination with liquid
chromatography (LC) on reversed-phase columns have been the most widely used methods for
sample preconcentration and separation for different compound classes like pesticides,
pharmaceuticals or estrogens. Electrospray ionization (ESI) and atmospheric pressure ionization
(APCI) are the most frequently used ionization techniques for polar and ionic compounds, as
well as for less polar non-ionic ones. The facilities of LC-MS have been successfully
demonstrated for different compound classes. Polar compounds from pharmaceuticals used as
betablockers, iodinated X-ray contrast media, or estrogens have been determined without
derivatization down to ultratrace concentrations. LC-MS can be viewed as a prerequisite for the
determination of algal and cyanobacterial toxins and the homologues and oligomers of
alkylphenol ethoxylates and their metabolites. Tandem mass spectrometric techniques and the
use of diagnostic ions reveal their usefulness for compound-class specific screening and
unknown identification, and are also valid for the analysis of pesticides and especially for their
transformation products.
Solution
Environmental contaminants of recent concern are pharmaceuticals, estrogens and
other endocrine disrupting chemicals (EDC) such as degradation products of surfactants, algal
and cyanobacterial toxins, disinfection by-products (DBPs) and metalloids. In addition,
pesticides (especially their transformation products), microorganisms, and humic substances
(HS), in their function as vehicles for contaminants and as precursors for by-products in water
treatment, traditionally play an important role. The present status of the application of LC-MS
techniques for these water constituents are discussed and examples of application are given.
Solid-phase extraction with various non-selective materials in combination with liquid
chromatography (LC) on reversed-phase columns have been the most widely used methods for
sample preconcentration and separation for different compound classes like pesticides,
pharmaceuticals or estrogens. Electrospray ionization (ESI) and atmospheric pressure ionization
(APCI) are the most frequently used ionization techniques for polar and ionic compounds, as
well as for less polar non-ionic ones. The facilities of .
C-H polar covalent bond Solution .pdf
The document discusses C-H polar covalent bonds. C-H bonds have some ionic character due to the difference in electronegativity between carbon and hydrogen. Hydrogen is more electronegative so it pulls the electrons in the bond slightly toward itself, giving the bond some polar character though it remains primarily covalent.
To insert an element at given position in arrayInsert(stack s1, s.pdf
To insert an element at given position in array:
Insert(stack s1, stack s2, int value, int pos)
//Inserts a value into the array at specified position.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By now, all elements are placed in reverse order from s1 to s2.
for i = 1 to pos - 1 //Till the pos-1
s1.push(s2.pop()) //Remove elements from s2, and push them to s1.
s1.push(value) //Now push your element in specified position pos.
while(!s2.empty()) //Push all the remaining elements in s2 to s1.
s1.push(s2.pop())
To delete an element at given position in array:
Delete(stack s1, stack s2, int pos)
//Deletes a value into the array at specified position.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By now, all elements are placed in reverse order from s1 to s2.
for i = 1 to pos - 1 //Till the pos-1
s1.push(s2.pop()) //Remove elements from s2, and push them to s1.
s1.pop(value) //Now pop your element in specified position pos.
while(!s2.empty()) //Push all the remaining elements in s2 to s1.
s1.push(s2.pop())
To delete a given element in array:
DeleteVal(stack s1, stack s2, int value)
//Deletes a value from the array.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By now, all elements are placed in reverse order from s1 to s2.
ele = s2.peek();
while(ele != value || !s2.empty()) //Till you found the element to be deleted.
s1.push(s2.pop()) //Remove elements from s2, and push them to s1.
ele = s2.peek()
s2.pop(value) //If element is found, delete it.
while(!s2.empty()) //Push all the remaining elements in s2 to s1.
s1.push(s2.pop())
If you have any queries with this, just get back to me.
Solution
To insert an element at given position in array:
Insert(stack s1, stack s2, int value, int pos)
//Inserts a value into the array at specified position.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By now, all elements are placed in reverse order from s1 to s2.
for i = 1 to pos - 1 //Till the pos-1
s1.push(s2.pop()) //Remove elements from s2, and push them to s1.
s1.push(value) //Now push your element in specified position pos.
while(!s2.empty()) //Push all the remaining elements in s2 to s1.
s1.push(s2.pop())
To delete an element at given position in array:
Delete(stack s1, stack s2, int pos)
//Deletes a value into the array at specified position.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By .
Their physical properties are so dofferent just because theintermole.pdf
Their physical properties are so dofferent just because theintermolecular or interatomic forces are
so different.
Solution
Their physical properties are so dofferent just because theintermolecular or interatomic forces are
so different..
Chemical weathering is the breakdown of rock by c.pdf
Chemical weathering is the breakdown of rock by chemical reaction. In this process
the minerals within the rock are changed into particles that can be easily carried away. Air and
water are both involved in many complex chemical reactions. The minerals in igneous rocks may
be unstable under normal atmospheric conditions, those formed at higher temperatures being
more readily attacked than those formed at lower temperatures. Igneous rocks are commonly
attacked by water, particularly acid or alkaline solutions, and all of the common igneous rock
forming minerals (with the exception of quartz, which is very resistant) are changed in this way
into clay minerals and chemicals in solution. Rock particles in the form of clay, silt, sand, and
gravel are transported by the agents of erosion (usually water, and less frequently, ice and wind)
to new locations and redeposited in layers, generally at a lower elevation. These agents reduce
the size of the particles, sort them by size, and then deposit them in new locations. The sediments
dropped by streams and rivers form alluvial fans, flood plains, deltas, and on the bottom of lakes
and the sea floor. The wind may move large amounts of sand and other smaller particles.
Glaciers transport and deposit great quantities of usually unsorted rock material as till. These
deposited particles eventually become compacted and cemented together, forming clastic
sedimentary rocks. Such rocks contain inert minerals that resist mechanical and chemical
breakdown, such as quartz. Quartz is one of the most mechanically and chemically resistant
minerals. Highly weathered sediments can contain several heavy and stable minerals, best
illustrated by the ZTR index.
Solution
Chemical weathering is the breakdown of rock by chemical reaction. In this process
the minerals within the rock are changed into particles that can be easily carried away. Air and
water are both involved in many complex chemical reactions. The minerals in igneous rocks may
be unstable under normal atmospheric conditions, those formed at higher temperatures being
more readily attacked than those formed at lower temperatures. Igneous rocks are commonly
attacked by water, particularly acid or alkaline solutions, and all of the common igneous rock
forming minerals (with the exception of quartz, which is very resistant) are changed in this way
into clay minerals and chemicals in solution. Rock particles in the form of clay, silt, sand, and
gravel are transported by the agents of erosion (usually water, and less frequently, ice and wind)
to new locations and redeposited in layers, generally at a lower elevation. These agents reduce
the size of the particles, sort them by size, and then deposit them in new locations. The sediments
dropped by streams and rivers form alluvial fans, flood plains, deltas, and on the bottom of lakes
and the sea floor. The wind may move large amounts of sand and other smaller particles.
Glaciers transport and deposit great quantities of.
bu puting your values in formula You need not to.pdf
bu puting your values in formula You need not to be concerned about the exact
mechanism of the reaction. First, try writing out the balanced equation. 4Li + O2 --->2Li2O So
which element was oxidized? Li does not have a charge while LiO is an ionic compound in
which electrons are \"shared\" according to electronegativity. In this case oxygen is much more
electronegative and it essentially obtains two electrons from Li through bonding. Now write out
the half reactions. Oxygen is reduced. O2 + 4e- ---> 2O (with a 2- charge) Li is oxidized. 4Li--
->4e- + 4Li (with a 1+ charge) *So overall O2 + 4Li + 4e- ---> 2O (2-) + 4Li (1+) + 4e- A
third reaction is also important. The products of the latter two steps combine to form 2Li2O. 2O
(2-) + 4Li (1+) ---> 2Li2O Combine this with the above equation and you will return to the
original balanced equation.
Solution
bu puting your values in formula You need not to be concerned about the exact
mechanism of the reaction. First, try writing out the balanced equation. 4Li + O2 --->2Li2O So
which element was oxidized? Li does not have a charge while LiO is an ionic compound in
which electrons are \"shared\" according to electronegativity. In this case oxygen is much more
electronegative and it essentially obtains two electrons from Li through bonding. Now write out
the half reactions. Oxygen is reduced. O2 + 4e- ---> 2O (with a 2- charge) Li is oxidized. 4Li--
->4e- + 4Li (with a 1+ charge) *So overall O2 + 4Li + 4e- ---> 2O (2-) + 4Li (1+) + 4e- A
third reaction is also important. The products of the latter two steps combine to form 2Li2O. 2O
(2-) + 4Li (1+) ---> 2Li2O Combine this with the above equation and you will return to the
original balanced equation..
Please post the figure.SolutionPlease post the figure..pdf
The document requests that a figure be posted but does not provide any context or details about the figure. It repeats the phrase "Please post the figure" twice without any additional information about the figure, its purpose, or why it should be posted. The summary is unable to extract any meaningful high-level information from the given document.
option B,C,D is true. gantt chart is used for project scheduling,tra.pdf
option B,C,D is true. gantt chart is used for project scheduling,tracking. it mainky uses the
technique of crtical path method.
Solution
option B,C,D is true. gantt chart is used for project scheduling,tracking. it mainky uses the
technique of crtical path method..
The mole is a unit of measurement for the amount .pdf
The mole is a unit of measurement for the amount of substance or chemical amount.
It is one of the base units in the International System of Units, and has the unit symbol mol. n
ionic compound is a chemical compound in which ions are held together in a lattice structure by
ionic bonds. Usually, the positively charged portion consists of metal cations and the negatively
charged portion is an anion or polyatomic ion. Ions in ionic compounds are held together by the
electrostatic force between oppositely charged bodies. Ionic compounds have a high melting and
boiling point, and they are hard and very brittle.
Solution
The mole is a unit of measurement for the amount of substance or chemical amount.
It is one of the base units in the International System of Units, and has the unit symbol mol. n
ionic compound is a chemical compound in which ions are held together in a lattice structure by
ionic bonds. Usually, the positively charged portion consists of metal cations and the negatively
charged portion is an anion or polyatomic ion. Ions in ionic compounds are held together by the
electrostatic force between oppositely charged bodies. Ionic compounds have a high melting and
boiling point, and they are hard and very brittle..
Ideally birds evolved from Dinosaurs, but they are closely related t.pdf
Ideally birds evolved from Dinosaurs, but they are closely related to even reptiles. Biologists use
2 types of classification system:
According to the Linnaen system, organisms are grouped on the basis of their characteristics
without considering their ancestry. Based on this a reptile is an animal that is ectothermic and
consists of scales, and thus birds cannot be reptiles.
While in Phylogenetics,organisms are grouped only on the basis of their ancestry, and
characteristics are only used to discover this ancestry. So based on this a reptile is any animal
descending from reptiles, and birds (including mammals) would be considered as reptiles.
Looking back at history, the 1st group of reptiles evolved around 300 million years ago.
Around 40 million years later, a group of reptiles called therapsids branched off, that became
modern mammals.
Another group of reptiles split off in the next 120 million years, and one branch called the
dinosaurs was very successful. Dinosaurs was only distantly related to modern snakes, lizards,
and turtles, groups that had split off at different times.
But 65 million years ago there was a massive extinction event, and all dinosaurs were killed
except for a single group of feathered dinosaurs. These evolved over the next 65 million years
into modern birds. So birds aren\'t just closely related to dinosaurs, they really are dinosaurs!
This is what most people mean when they say that birds are reptiles, although technically
according to the phylogenetic system mammals are also reptiles.
Birds and reptiles are both vertebrates and are alike in ways:
1. They both lay eggs which have a protective shell. This is an adaptation to prevent drying-out,
necessary in evolution before vertebrates could lay their eggs on land.
2. Both birds and reptiles have lungs and thus breathe air.
3. Both birds and reptiles have scales on their skin. In birds, most of the body is now covered
with feathers, which are modified scales. You can still see the scales on birds\' legs.
4. It is thought that birds evolved from reptiles. These probably were able to fly as well.
Birds and reptiles differ in ways such as:
While most reptiles are ectothermic (\"cold blooded\"), birds are endothermic (\"warm blooded).
Thus birds have mechanisms like mammals that enable them to maintain a body temperature that
is independent of their surroundings. Their feathers and their high metabolic rate help keep them
warm in cold environments, for example.
While reptiles have a 3-chambered heart, birds have a 4-chambered heart. This allows them to
be more efficient, as the deoxygenated blood from the tissues is completely separated from the
oxygenated blood from the lungs.While reptiles have teeth, birds do not. They grind their food in
an organ called the gizzard.
Solution
Ideally birds evolved from Dinosaurs, but they are closely related to even reptiles. Biologists use
2 types of classification system:
According to the Linnaen system, organisms are grouped on th.
Introduction Termination of a project is inevitable, but how it .pdf
Introduction
Termination of a project is inevitable, but how it is terminated and when may have a profound
and long lasting impact on the organization and its employees. The success of future projects
may depend on not only the success of past ones, but also on how unsuccessful projects were
treated by the organization and its stakeholders. Firms have the option of initiating a variety of
entrepreneurial projects with varying degrees of risk. If an organization chooses to accept greater
risks, it should avoid penalizing members of projects that turn out to be unsuccessful. If team
members believe they will be penalized for participating in unsuccessful projects, they will be
less willing to terminate failed projects and may become risk adverse.
This research contains information about the project life cycle and the importance of continually
monitoring a project to determine if it is meeting the objectives established at the outset. We
have identified and categorized external and internal factors that influence the success or failure
of projects. The relative importance of each factor varies by organization and project type.
Organizing a project\'s termination process is especially important when it has failed, because of
the lasting impact on future projects as well as the organization\'s image. Including project team
members in the termination process will increase their loyalty and commitment, not only to the
organization but also to the success of future projects. At the end of a project a post-audit report
will be prepared that summarizes the project and provides recommendations for similar projects
in the future. Lastly, as a project is closed down or completed it is important that senior
management recognize the contributions of the project team.
The Project Life Cycle
There are several stages in the life cycle of a project: (1) project selection, (2) planning, (3)
execution, and (4) termination (Ruhl, 1988). The first phase, project selection, will vary among
firms. Each project must be evaluated to determine which is the best use of corporate funds. Each
will have different risks, benefits, and costs, making the selection very difficult. The final
decision should be based on the project\'s financial return and how well it assists the organization
in achieving its long-run strategic objectives.
Once a selection has been made, formal plans must be developed. The importance of thorough
project planning cannot be overemphasized. The objective of this process should be to develop a
master plan that details how each asset of the organization will be used to accomplish the
project\'s goals. Thorough and aggressive planning will also increase the team\'s commitment to
success. The two most important components of the master plan are the project budget and the
master schedule, which are developed from a detailed list of specific project tasks. The master
plan should include measures for evaluating the progress of the project as well as guideli.
In inline heapsort we use only single array throughout the program t.pdf
In inline heapsort we use only single array throughout the program to decrease the running time,
where as, in simple heap sort we use external data structure memory usage of more than O(1) at
a time.
Please consider the below inline heap program which prints out the running time, which is lesser
to the the simple heap sort.
//program
class heapsort
{
private final int array[]; // The array being sorted
heapsort(int array[], int N)
{
this.array = array;
int Last = N-1;
// its children are at elements 2*I+1 and 2*I+2.
// phase 1: form heap
// Construct heap bottom-up, starting with small trees just above leaves
// and coalescing into larger trees near the root.
for( int Top = Last/2; Top >= 0; Top-- )
{
adjust(Top, Last);
}
// phase 2: use heap to sort
// Move top element (largest) out of heap, swapping with last element
// and changing the heap boundary, until only one element remains.
while( Last > 0 )
{
swap(0, Last);
adjust(0, --Last);
}
}
/**
* adjust(Top, Last) adjusts the tree between Top and Last
**/
void adjust(int Top, int Last)
{
int TopVal = array[Top]; // Set aside top of heap
int Parent, Child;
for( Parent = Top; ; Parent = Child ) // Iterate down through tree
{
Child = 2*Parent+1; // Child means left child
if( Child > Last )
break; // Left child non-existent
if( Child+1 <= Last // Right child exists
&& array[Child] < array[Child+1] ) // and right child is larger
Child++; // Child is the larger child
if( TopVal >= array[Child] )
break; // Location for TopVal found
array[Parent] = array[Child]; // Move larger child up in tree
}
array[Parent] = TopVal; // Install TopVal in place
}
//swapping
void swap(int i, int j)
{
int temp = array[i];
array[i] = array[j];
array[j] = temp;
}
public static void main(String[] args)
{
int N = 0; // number of elements in array
int array[] =
{43,65,12,89,11,5,1,88,123,999,233,18,553,332,144,98,452,7663,111,23,654,8735,998};
//initialising array
N=array.length;
System.err.println(\"Sorting started\");
long startTime = System.nanoTime();
new heapsort(array, N); // sorting
long endTime = System.nanoTime();
long totalTime = endTime - startTime;
for( int i = 0; i < N; i++ )
{
System.out.print(array[i] + \" \");
}
System.out.println();
System.out.println(\"Time in nanos\"+totalTime);
}
}
//runn the above program for inline heap sort.
Solution
In inline heapsort we use only single array throughout the program to decrease the running time,
where as, in simple heap sort we use external data structure memory usage of more than O(1) at
a time.
Please consider the below inline heap program which prints out the running time, which is lesser
to the the simple heap sort.
//program
class heapsort
{
private final int array[]; // The array being sorted
heapsort(int array[], int N)
{
this.array = array;
int Last = N-1;
// its children are at elements 2*I+1 and 2*I+2.
// phase 1: form heap
// Construct heap bottom-up, starting with small trees just above leaves
// and coalescing into larger trees near the root.
for( int T.
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
More Related Content
More from anuragperipheral
salicylic acid alcohol (R-OH) and carboxylic aci.pdf
salicylic acid: alcohol (R-OH) and carboxylic acid (R-COOH) acetylsalicylic acid
(aspirin): carboxylic acid and ester (R-COOR)
Solution
salicylic acid: alcohol (R-OH) and carboxylic acid (R-COOH) acetylsalicylic acid
(aspirin): carboxylic acid and ester (R-COOR).
no it doesnot .pdf
This very short document does not seem to provide any clear information that can be summarized in 3 sentences or less. It contains the phrase "no it doesnot" repeated but no other context or details.
It would be Ruthenium (II) Sulfide Ruthenium is .pdf
It would be Ruthenium (II) Sulfide Ruthenium is a transition metal, meaning that it
can have multiple oxidation numbers. Sulfur always takes the charge of -2, so from that we see
that there is a 1 to 1 relation between Ru and S in the empirical formula, so that means that
Ruthenium has the opposite charge, +2.
Solution
It would be Ruthenium (II) Sulfide Ruthenium is a transition metal, meaning that it
can have multiple oxidation numbers. Sulfur always takes the charge of -2, so from that we see
that there is a 1 to 1 relation between Ru and S in the empirical formula, so that means that
Ruthenium has the opposite charge, +2..
ketones do not give tollens test.. hence no react.pdf
ketones do not give tollens test.. hence no reaction
Solution
ketones do not give tollens test.. hence no reaction.
for IONIC the metal name followed by nonmetal io.pdf
for IONIC: the metal name followed by nonmetal ion (-ide) for ex: NaCl is Sodium
Chloride or MgS is Magnesium Sulfide
Solution
for IONIC: the metal name followed by nonmetal ion (-ide) for ex: NaCl is Sodium
Chloride or MgS is Magnesium Sulfide.
pH = 4-log2.4 = 3.62 pOH 14 - pH = 14-3.62 = 10.3.pdf
pH = 4-log2.4 = 3.62 pOH 14 - pH = 14-3.62 = 10.38 concentration of OH- = 10^(-
14) / (2.4*10^(-4)) = 4.167* 10^(-11)
Solution
pH = 4-log2.4 = 3.62 pOH 14 - pH = 14-3.62 = 10.38 concentration of OH- = 10^(-
14) / (2.4*10^(-4)) = 4.167* 10^(-11).
This suggest that dissociation of FeCl3 is 100 .pdf
This suggest that dissociation of FeCl3 is 100 % to form 4 ions (1Fe+3Cl). Other
dissociation also may be possible like FeCl3---->(FeCl2) + Cl- FeCl3---->(FeCl)2+ + 2Cl- so
number of ions is averaged considering dissociation constants which is 3.4
Solution
This suggest that dissociation of FeCl3 is 100 % to form 4 ions (1Fe+3Cl). Other
dissociation also may be possible like FeCl3---->(FeCl2) + Cl- FeCl3---->(FeCl)2+ + 2Cl- so
number of ions is averaged considering dissociation constants which is 3.4.
Total probability of dot received P = (37)(78).pdf
Total probability of dot received P = (3/7)*(7/8)+(4/7)*(1/8)=0.4464 probability
that dot sentP1 = 3/7=0.4285 so P(dot sent | dot received).= P1/P=0.4285/.4464=0.96
Solution
Total probability of dot received P = (3/7)*(7/8)+(4/7)*(1/8)=0.4464 probability
that dot sentP1 = 3/7=0.4285 so P(dot sent | dot received).= P1/P=0.4285/.4464=0.96.
Environmental contaminants of recent concern are .pdf
Environmental contaminants of recent concern are pharmaceuticals, estrogens and
other endocrine disrupting chemicals (EDC) such as degradation products of surfactants, algal
and cyanobacterial toxins, disinfection by-products (DBPs) and metalloids. In addition,
pesticides (especially their transformation products), microorganisms, and humic substances
(HS), in their function as vehicles for contaminants and as precursors for by-products in water
treatment, traditionally play an important role. The present status of the application of LC-MS
techniques for these water constituents are discussed and examples of application are given.
Solid-phase extraction with various non-selective materials in combination with liquid
chromatography (LC) on reversed-phase columns have been the most widely used methods for
sample preconcentration and separation for different compound classes like pesticides,
pharmaceuticals or estrogens. Electrospray ionization (ESI) and atmospheric pressure ionization
(APCI) are the most frequently used ionization techniques for polar and ionic compounds, as
well as for less polar non-ionic ones. The facilities of LC-MS have been successfully
demonstrated for different compound classes. Polar compounds from pharmaceuticals used as
betablockers, iodinated X-ray contrast media, or estrogens have been determined without
derivatization down to ultratrace concentrations. LC-MS can be viewed as a prerequisite for the
determination of algal and cyanobacterial toxins and the homologues and oligomers of
alkylphenol ethoxylates and their metabolites. Tandem mass spectrometric techniques and the
use of diagnostic ions reveal their usefulness for compound-class specific screening and
unknown identification, and are also valid for the analysis of pesticides and especially for their
transformation products.
Solution
Environmental contaminants of recent concern are pharmaceuticals, estrogens and
other endocrine disrupting chemicals (EDC) such as degradation products of surfactants, algal
and cyanobacterial toxins, disinfection by-products (DBPs) and metalloids. In addition,
pesticides (especially their transformation products), microorganisms, and humic substances
(HS), in their function as vehicles for contaminants and as precursors for by-products in water
treatment, traditionally play an important role. The present status of the application of LC-MS
techniques for these water constituents are discussed and examples of application are given.
Solid-phase extraction with various non-selective materials in combination with liquid
chromatography (LC) on reversed-phase columns have been the most widely used methods for
sample preconcentration and separation for different compound classes like pesticides,
pharmaceuticals or estrogens. Electrospray ionization (ESI) and atmospheric pressure ionization
(APCI) are the most frequently used ionization techniques for polar and ionic compounds, as
well as for less polar non-ionic ones. The facilities of .
C-H polar covalent bond Solution .pdf
The document discusses C-H polar covalent bonds. C-H bonds have some ionic character due to the difference in electronegativity between carbon and hydrogen. Hydrogen is more electronegative so it pulls the electrons in the bond slightly toward itself, giving the bond some polar character though it remains primarily covalent.
To insert an element at given position in arrayInsert(stack s1, s.pdf
To insert an element at given position in array:
Insert(stack s1, stack s2, int value, int pos)
//Inserts a value into the array at specified position.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By now, all elements are placed in reverse order from s1 to s2.
for i = 1 to pos - 1 //Till the pos-1
s1.push(s2.pop()) //Remove elements from s2, and push them to s1.
s1.push(value) //Now push your element in specified position pos.
while(!s2.empty()) //Push all the remaining elements in s2 to s1.
s1.push(s2.pop())
To delete an element at given position in array:
Delete(stack s1, stack s2, int pos)
//Deletes a value into the array at specified position.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By now, all elements are placed in reverse order from s1 to s2.
for i = 1 to pos - 1 //Till the pos-1
s1.push(s2.pop()) //Remove elements from s2, and push them to s1.
s1.pop(value) //Now pop your element in specified position pos.
while(!s2.empty()) //Push all the remaining elements in s2 to s1.
s1.push(s2.pop())
To delete a given element in array:
DeleteVal(stack s1, stack s2, int value)
//Deletes a value from the array.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By now, all elements are placed in reverse order from s1 to s2.
ele = s2.peek();
while(ele != value || !s2.empty()) //Till you found the element to be deleted.
s1.push(s2.pop()) //Remove elements from s2, and push them to s1.
ele = s2.peek()
s2.pop(value) //If element is found, delete it.
while(!s2.empty()) //Push all the remaining elements in s2 to s1.
s1.push(s2.pop())
If you have any queries with this, just get back to me.
Solution
To insert an element at given position in array:
Insert(stack s1, stack s2, int value, int pos)
//Inserts a value into the array at specified position.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By now, all elements are placed in reverse order from s1 to s2.
for i = 1 to pos - 1 //Till the pos-1
s1.push(s2.pop()) //Remove elements from s2, and push them to s1.
s1.push(value) //Now push your element in specified position pos.
while(!s2.empty()) //Push all the remaining elements in s2 to s1.
s1.push(s2.pop())
To delete an element at given position in array:
Delete(stack s1, stack s2, int pos)
//Deletes a value into the array at specified position.
//Assume s1 is a stack which holds the values, and s2 is an empty stack.
while(!s1.empty()) //Till the stack is empty.
s2.push(s1.pop()) //Pop element from s1, and push it in s2.
//By .
Their physical properties are so dofferent just because theintermole.pdf
Their physical properties are so dofferent just because theintermolecular or interatomic forces are
so different.
Solution
Their physical properties are so dofferent just because theintermolecular or interatomic forces are
so different..
Chemical weathering is the breakdown of rock by c.pdf
Chemical weathering is the breakdown of rock by chemical reaction. In this process
the minerals within the rock are changed into particles that can be easily carried away. Air and
water are both involved in many complex chemical reactions. The minerals in igneous rocks may
be unstable under normal atmospheric conditions, those formed at higher temperatures being
more readily attacked than those formed at lower temperatures. Igneous rocks are commonly
attacked by water, particularly acid or alkaline solutions, and all of the common igneous rock
forming minerals (with the exception of quartz, which is very resistant) are changed in this way
into clay minerals and chemicals in solution. Rock particles in the form of clay, silt, sand, and
gravel are transported by the agents of erosion (usually water, and less frequently, ice and wind)
to new locations and redeposited in layers, generally at a lower elevation. These agents reduce
the size of the particles, sort them by size, and then deposit them in new locations. The sediments
dropped by streams and rivers form alluvial fans, flood plains, deltas, and on the bottom of lakes
and the sea floor. The wind may move large amounts of sand and other smaller particles.
Glaciers transport and deposit great quantities of usually unsorted rock material as till. These
deposited particles eventually become compacted and cemented together, forming clastic
sedimentary rocks. Such rocks contain inert minerals that resist mechanical and chemical
breakdown, such as quartz. Quartz is one of the most mechanically and chemically resistant
minerals. Highly weathered sediments can contain several heavy and stable minerals, best
illustrated by the ZTR index.
Solution
Chemical weathering is the breakdown of rock by chemical reaction. In this process
the minerals within the rock are changed into particles that can be easily carried away. Air and
water are both involved in many complex chemical reactions. The minerals in igneous rocks may
be unstable under normal atmospheric conditions, those formed at higher temperatures being
more readily attacked than those formed at lower temperatures. Igneous rocks are commonly
attacked by water, particularly acid or alkaline solutions, and all of the common igneous rock
forming minerals (with the exception of quartz, which is very resistant) are changed in this way
into clay minerals and chemicals in solution. Rock particles in the form of clay, silt, sand, and
gravel are transported by the agents of erosion (usually water, and less frequently, ice and wind)
to new locations and redeposited in layers, generally at a lower elevation. These agents reduce
the size of the particles, sort them by size, and then deposit them in new locations. The sediments
dropped by streams and rivers form alluvial fans, flood plains, deltas, and on the bottom of lakes
and the sea floor. The wind may move large amounts of sand and other smaller particles.
Glaciers transport and deposit great quantities of.
bu puting your values in formula You need not to.pdf
bu puting your values in formula You need not to be concerned about the exact
mechanism of the reaction. First, try writing out the balanced equation. 4Li + O2 --->2Li2O So
which element was oxidized? Li does not have a charge while LiO is an ionic compound in
which electrons are \"shared\" according to electronegativity. In this case oxygen is much more
electronegative and it essentially obtains two electrons from Li through bonding. Now write out
the half reactions. Oxygen is reduced. O2 + 4e- ---> 2O (with a 2- charge) Li is oxidized. 4Li--
->4e- + 4Li (with a 1+ charge) *So overall O2 + 4Li + 4e- ---> 2O (2-) + 4Li (1+) + 4e- A
third reaction is also important. The products of the latter two steps combine to form 2Li2O. 2O
(2-) + 4Li (1+) ---> 2Li2O Combine this with the above equation and you will return to the
original balanced equation.
Solution
bu puting your values in formula You need not to be concerned about the exact
mechanism of the reaction. First, try writing out the balanced equation. 4Li + O2 --->2Li2O So
which element was oxidized? Li does not have a charge while LiO is an ionic compound in
which electrons are \"shared\" according to electronegativity. In this case oxygen is much more
electronegative and it essentially obtains two electrons from Li through bonding. Now write out
the half reactions. Oxygen is reduced. O2 + 4e- ---> 2O (with a 2- charge) Li is oxidized. 4Li--
->4e- + 4Li (with a 1+ charge) *So overall O2 + 4Li + 4e- ---> 2O (2-) + 4Li (1+) + 4e- A
third reaction is also important. The products of the latter two steps combine to form 2Li2O. 2O
(2-) + 4Li (1+) ---> 2Li2O Combine this with the above equation and you will return to the
original balanced equation..
Please post the figure.SolutionPlease post the figure..pdf
The document requests that a figure be posted but does not provide any context or details about the figure. It repeats the phrase "Please post the figure" twice without any additional information about the figure, its purpose, or why it should be posted. The summary is unable to extract any meaningful high-level information from the given document.
option B,C,D is true. gantt chart is used for project scheduling,tra.pdf
option B,C,D is true. gantt chart is used for project scheduling,tracking. it mainky uses the
technique of crtical path method.
Solution
option B,C,D is true. gantt chart is used for project scheduling,tracking. it mainky uses the
technique of crtical path method..
The mole is a unit of measurement for the amount .pdf
The mole is a unit of measurement for the amount of substance or chemical amount.
It is one of the base units in the International System of Units, and has the unit symbol mol. n
ionic compound is a chemical compound in which ions are held together in a lattice structure by
ionic bonds. Usually, the positively charged portion consists of metal cations and the negatively
charged portion is an anion or polyatomic ion. Ions in ionic compounds are held together by the
electrostatic force between oppositely charged bodies. Ionic compounds have a high melting and
boiling point, and they are hard and very brittle.
Solution
The mole is a unit of measurement for the amount of substance or chemical amount.
It is one of the base units in the International System of Units, and has the unit symbol mol. n
ionic compound is a chemical compound in which ions are held together in a lattice structure by
ionic bonds. Usually, the positively charged portion consists of metal cations and the negatively
charged portion is an anion or polyatomic ion. Ions in ionic compounds are held together by the
electrostatic force between oppositely charged bodies. Ionic compounds have a high melting and
boiling point, and they are hard and very brittle..
Ideally birds evolved from Dinosaurs, but they are closely related t.pdf
Ideally birds evolved from Dinosaurs, but they are closely related to even reptiles. Biologists use
2 types of classification system:
According to the Linnaen system, organisms are grouped on the basis of their characteristics
without considering their ancestry. Based on this a reptile is an animal that is ectothermic and
consists of scales, and thus birds cannot be reptiles.
While in Phylogenetics,organisms are grouped only on the basis of their ancestry, and
characteristics are only used to discover this ancestry. So based on this a reptile is any animal
descending from reptiles, and birds (including mammals) would be considered as reptiles.
Looking back at history, the 1st group of reptiles evolved around 300 million years ago.
Around 40 million years later, a group of reptiles called therapsids branched off, that became
modern mammals.
Another group of reptiles split off in the next 120 million years, and one branch called the
dinosaurs was very successful. Dinosaurs was only distantly related to modern snakes, lizards,
and turtles, groups that had split off at different times.
But 65 million years ago there was a massive extinction event, and all dinosaurs were killed
except for a single group of feathered dinosaurs. These evolved over the next 65 million years
into modern birds. So birds aren\'t just closely related to dinosaurs, they really are dinosaurs!
This is what most people mean when they say that birds are reptiles, although technically
according to the phylogenetic system mammals are also reptiles.
Birds and reptiles are both vertebrates and are alike in ways:
1. They both lay eggs which have a protective shell. This is an adaptation to prevent drying-out,
necessary in evolution before vertebrates could lay their eggs on land.
2. Both birds and reptiles have lungs and thus breathe air.
3. Both birds and reptiles have scales on their skin. In birds, most of the body is now covered
with feathers, which are modified scales. You can still see the scales on birds\' legs.
4. It is thought that birds evolved from reptiles. These probably were able to fly as well.
Birds and reptiles differ in ways such as:
While most reptiles are ectothermic (\"cold blooded\"), birds are endothermic (\"warm blooded).
Thus birds have mechanisms like mammals that enable them to maintain a body temperature that
is independent of their surroundings. Their feathers and their high metabolic rate help keep them
warm in cold environments, for example.
While reptiles have a 3-chambered heart, birds have a 4-chambered heart. This allows them to
be more efficient, as the deoxygenated blood from the tissues is completely separated from the
oxygenated blood from the lungs.While reptiles have teeth, birds do not. They grind their food in
an organ called the gizzard.
Solution
Ideally birds evolved from Dinosaurs, but they are closely related to even reptiles. Biologists use
2 types of classification system:
According to the Linnaen system, organisms are grouped on th.
Introduction Termination of a project is inevitable, but how it .pdf
Introduction
Termination of a project is inevitable, but how it is terminated and when may have a profound
and long lasting impact on the organization and its employees. The success of future projects
may depend on not only the success of past ones, but also on how unsuccessful projects were
treated by the organization and its stakeholders. Firms have the option of initiating a variety of
entrepreneurial projects with varying degrees of risk. If an organization chooses to accept greater
risks, it should avoid penalizing members of projects that turn out to be unsuccessful. If team
members believe they will be penalized for participating in unsuccessful projects, they will be
less willing to terminate failed projects and may become risk adverse.
This research contains information about the project life cycle and the importance of continually
monitoring a project to determine if it is meeting the objectives established at the outset. We
have identified and categorized external and internal factors that influence the success or failure
of projects. The relative importance of each factor varies by organization and project type.
Organizing a project\'s termination process is especially important when it has failed, because of
the lasting impact on future projects as well as the organization\'s image. Including project team
members in the termination process will increase their loyalty and commitment, not only to the
organization but also to the success of future projects. At the end of a project a post-audit report
will be prepared that summarizes the project and provides recommendations for similar projects
in the future. Lastly, as a project is closed down or completed it is important that senior
management recognize the contributions of the project team.
The Project Life Cycle
There are several stages in the life cycle of a project: (1) project selection, (2) planning, (3)
execution, and (4) termination (Ruhl, 1988). The first phase, project selection, will vary among
firms. Each project must be evaluated to determine which is the best use of corporate funds. Each
will have different risks, benefits, and costs, making the selection very difficult. The final
decision should be based on the project\'s financial return and how well it assists the organization
in achieving its long-run strategic objectives.
Once a selection has been made, formal plans must be developed. The importance of thorough
project planning cannot be overemphasized. The objective of this process should be to develop a
master plan that details how each asset of the organization will be used to accomplish the
project\'s goals. Thorough and aggressive planning will also increase the team\'s commitment to
success. The two most important components of the master plan are the project budget and the
master schedule, which are developed from a detailed list of specific project tasks. The master
plan should include measures for evaluating the progress of the project as well as guideli.
In inline heapsort we use only single array throughout the program t.pdf
In inline heapsort we use only single array throughout the program to decrease the running time,
where as, in simple heap sort we use external data structure memory usage of more than O(1) at
a time.
Please consider the below inline heap program which prints out the running time, which is lesser
to the the simple heap sort.
//program
class heapsort
{
private final int array[]; // The array being sorted
heapsort(int array[], int N)
{
this.array = array;
int Last = N-1;
// its children are at elements 2*I+1 and 2*I+2.
// phase 1: form heap
// Construct heap bottom-up, starting with small trees just above leaves
// and coalescing into larger trees near the root.
for( int Top = Last/2; Top >= 0; Top-- )
{
adjust(Top, Last);
}
// phase 2: use heap to sort
// Move top element (largest) out of heap, swapping with last element
// and changing the heap boundary, until only one element remains.
while( Last > 0 )
{
swap(0, Last);
adjust(0, --Last);
}
}
/**
* adjust(Top, Last) adjusts the tree between Top and Last
**/
void adjust(int Top, int Last)
{
int TopVal = array[Top]; // Set aside top of heap
int Parent, Child;
for( Parent = Top; ; Parent = Child ) // Iterate down through tree
{
Child = 2*Parent+1; // Child means left child
if( Child > Last )
break; // Left child non-existent
if( Child+1 <= Last // Right child exists
&& array[Child] < array[Child+1] ) // and right child is larger
Child++; // Child is the larger child
if( TopVal >= array[Child] )
break; // Location for TopVal found
array[Parent] = array[Child]; // Move larger child up in tree
}
array[Parent] = TopVal; // Install TopVal in place
}
//swapping
void swap(int i, int j)
{
int temp = array[i];
array[i] = array[j];
array[j] = temp;
}
public static void main(String[] args)
{
int N = 0; // number of elements in array
int array[] =
{43,65,12,89,11,5,1,88,123,999,233,18,553,332,144,98,452,7663,111,23,654,8735,998};
//initialising array
N=array.length;
System.err.println(\"Sorting started\");
long startTime = System.nanoTime();
new heapsort(array, N); // sorting
long endTime = System.nanoTime();
long totalTime = endTime - startTime;
for( int i = 0; i < N; i++ )
{
System.out.print(array[i] + \" \");
}
System.out.println();
System.out.println(\"Time in nanos\"+totalTime);
}
}
//runn the above program for inline heap sort.
Solution
In inline heapsort we use only single array throughout the program to decrease the running time,
where as, in simple heap sort we use external data structure memory usage of more than O(1) at
a time.
Please consider the below inline heap program which prints out the running time, which is lesser
to the the simple heap sort.
//program
class heapsort
{
private final int array[]; // The array being sorted
heapsort(int array[], int N)
{
this.array = array;
int Last = N-1;
// its children are at elements 2*I+1 and 2*I+2.
// phase 1: form heap
// Construct heap bottom-up, starting with small trees just above leaves
// and coalescing into larger trees near the root.
for( int T.
More from anuragperipheral (20)
salicylic acid alcohol (R-OH) and carboxylic aci.pdf
salicylic acid alcohol (R-OH) and carboxylic aci.pdf
It would be Ruthenium (II) Sulfide Ruthenium is .pdf
It would be Ruthenium (II) Sulfide Ruthenium is .pdf
ketones do not give tollens test.. hence no react.pdf
ketones do not give tollens test.. hence no react.pdf
for IONIC the metal name followed by nonmetal io.pdf
for IONIC the metal name followed by nonmetal io.pdf
pH = 4-log2.4 = 3.62 pOH 14 - pH = 14-3.62 = 10.3.pdf
pH = 4-log2.4 = 3.62 pOH 14 - pH = 14-3.62 = 10.3.pdf
This suggest that dissociation of FeCl3 is 100 .pdf
This suggest that dissociation of FeCl3 is 100 .pdf
Total probability of dot received P = (37)(78).pdf
Total probability of dot received P = (37)(78).pdf
Environmental contaminants of recent concern are .pdf
Environmental contaminants of recent concern are .pdf
To insert an element at given position in arrayInsert(stack s1, s.pdf
To insert an element at given position in arrayInsert(stack s1, s.pdf
Their physical properties are so dofferent just because theintermole.pdf
Their physical properties are so dofferent just because theintermole.pdf
Chemical weathering is the breakdown of rock by c.pdf
Chemical weathering is the breakdown of rock by c.pdf
bu puting your values in formula You need not to.pdf
bu puting your values in formula You need not to.pdf
Please post the figure.SolutionPlease post the figure..pdf
Please post the figure.SolutionPlease post the figure..pdf
option B,C,D is true. gantt chart is used for project scheduling,tra.pdf
option B,C,D is true. gantt chart is used for project scheduling,tra.pdf
The mole is a unit of measurement for the amount .pdf
The mole is a unit of measurement for the amount .pdf
Ideally birds evolved from Dinosaurs, but they are closely related t.pdf
Ideally birds evolved from Dinosaurs, but they are closely related t.pdf
Introduction Termination of a project is inevitable, but how it .pdf
Introduction Termination of a project is inevitable, but how it .pdf
In inline heapsort we use only single array throughout the program t.pdf
In inline heapsort we use only single array throughout the program t.pdf
Recently uploaded
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Digital Artifact 1 - 10VCD Environments Unit
Digital Artifact 1 - 10VCD Environments Unit - NGV Pavilion Concept Design
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdRecently uploaded (20)
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
I agree! Thank you for the image! .pdf
- 1. I agree! Thank you for the image! Solution I agree! Thank you for the image!