This document provides specifications and torque values for various components of a service repair for an electric forklift model. It includes specifications for the hydraulic system, wheels and tires, mast speeds, battery specifications, and torque values. Key details include relief pressures for the lift, tilt, auxiliary and steering systems, torque values for drive wheel bolts and steer wheel nuts, standard and optional tire sizes, battery compartment sizes and maximum heights for different battery types, maximum carriage and tilt creep rates, and mast lifting and lowering speeds under different load conditions.
Hyster c108 (e3.00 xl europe) forklift service repair manualfujdfjjjsekkemme
This document provides information about steering systems for electric lift trucks. It describes the components and operation of power steering and power steering with on-demand systems. The key components are the steering wheel, optical encoder, activator, steering control unit, steering pump motor, steering pump, and hydraulic steering motor or steering cylinder. It also provides repair procedures for the steering wheel and column assembly, including removal and installation of components. Diagrams are included to illustrate the steering system components and hydraulic schematic.
Hyster s005 (h80 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster E008 (H550F) Forklift Service Repair Manualfjksekmdmm
This is the Highly Detailed factory service repair manual for theHYSTER E008 (H550F) FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYSTER E008 (H550F) FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Alternator with Regulator
Assembly Guide
Auxiliary Brake Caliper
Brake Accumulator
Brake System
Capacities and Specifications
Cooling System
Diagrams
Differential
Extendable Container Attachment (Elme)
Frame
Hydraulic Gear Pumps
Hydraulic Plate
Hydraulic System
Instrument Panel Indicators and Senders
Mast
Metric and Inch (SAE) Fasteners
Oil-Cooled Brakes
Parking Brake
Periodic Maintenance
Planetary Gear Axle
Service Brake
Starter
Steering Axle
Steering System
The Extendable Container Attachment
The Fixed Container Attachment
Three-Speed Powershift Transmission
Tilt Cylinders
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYSTER E008 (H550F) FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
The document provides instructions for repairing various components of a lift truck including the counterweight, hood, overhead guard, LED lights, operator restraint system, radiator, and exhaust system. The counterweight repair section describes how to safely remove and install the counterweight using lifting eyebolts and a lifting device. The radiator repair section explains how to drain the coolant before removing the radiator, and notes the need to add coolant after installation. Safety warnings are provided throughout regarding putting the lift truck on blocks and adding additional blocks when removing heavy components to maintain stability.
Hyster b416 (j65 z) forklift service repair manualfsefkksefmme
This document provides specifications and repair information for hydraulic systems and steering systems on J40-65Z lift trucks. It includes:
1) Tables listing relief pressure specifications for manual and electric hydraulic control valves, steering systems, and operating temperatures.
2) Dimensions and weights for battery compartments and counterweights on various models.
3) Mast speed specifications for different models in feet per minute for lifting and lowering loads at rated capacity and without a load.
4) Procedures for removing and repairing components of the steering wheel, column, and control unit.
Yamaha G1 Golf Car Service Repair Manualjksmeremmd
This is the Highly Detailed factory service repair manual for theYAMAHA G1 GOLF CAR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YAMAHA G1 GOLF CAR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYAMAHA G1 GOLF CAR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Hyster b274 (h50 ct) forklift service repair manualhhjsekmdmm
This document provides specifications and repair information for lift truck models S50CT and H50CT, including:
- Lifting capacities, counterweight weights, tire sizes, fuel capacities, fluid capacities, and electrical specifications.
- Procedures for removing and disassembling the drive axle, including draining fluid, removing wheels and brakes, and separating the drive axle from the transmission.
- Instructions for cleaning, inspecting, and replacing worn parts of the disassembled drive axle.
- Steps for reassembling and reinstalling the drive axle, including applying sealant, tightening fasteners, and positioning the drive axle in the lift truck frame.
Nissan forklift electric n01 series service repair manualfjjskekskemmm
This document provides:
1) An overview of service notices for the GN01 model and 1997 N01 model, including new high-performance models and technical improvements.
2) A technical bulletin on applied models and service notices for the GN01 1997 model, including new features and specification changes.
3) Dimensional drawings and specifications for N01-U models for European countries and the U.S. and Canada, including overall dimensions, ground clearances, and lift capacities.
Hyster c108 (e3.00 xl europe) forklift service repair manualfujdfjjjsekkemme
This document provides information about steering systems for electric lift trucks. It describes the components and operation of power steering and power steering with on-demand systems. The key components are the steering wheel, optical encoder, activator, steering control unit, steering pump motor, steering pump, and hydraulic steering motor or steering cylinder. It also provides repair procedures for the steering wheel and column assembly, including removal and installation of components. Diagrams are included to illustrate the steering system components and hydraulic schematic.
Hyster s005 (h80 ft) forklift service repair manualfhjsekkemm
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster E008 (H550F) Forklift Service Repair Manualfjksekmdmm
This is the Highly Detailed factory service repair manual for theHYSTER E008 (H550F) FORKLIFT, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.HYSTER E008 (H550F) FORKLIFT Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Alternator with Regulator
Assembly Guide
Auxiliary Brake Caliper
Brake Accumulator
Brake System
Capacities and Specifications
Cooling System
Diagrams
Differential
Extendable Container Attachment (Elme)
Frame
Hydraulic Gear Pumps
Hydraulic Plate
Hydraulic System
Instrument Panel Indicators and Senders
Mast
Metric and Inch (SAE) Fasteners
Oil-Cooled Brakes
Parking Brake
Periodic Maintenance
Planetary Gear Axle
Service Brake
Starter
Steering Axle
Steering System
The Extendable Container Attachment
The Fixed Container Attachment
Three-Speed Powershift Transmission
Tilt Cylinders
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveHYSTER E008 (H550F) FORKLIFT Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
The document provides instructions for repairing various components of a lift truck including the counterweight, hood, overhead guard, LED lights, operator restraint system, radiator, and exhaust system. The counterweight repair section describes how to safely remove and install the counterweight using lifting eyebolts and a lifting device. The radiator repair section explains how to drain the coolant before removing the radiator, and notes the need to add coolant after installation. Safety warnings are provided throughout regarding putting the lift truck on blocks and adding additional blocks when removing heavy components to maintain stability.
Hyster b416 (j65 z) forklift service repair manualfsefkksefmme
This document provides specifications and repair information for hydraulic systems and steering systems on J40-65Z lift trucks. It includes:
1) Tables listing relief pressure specifications for manual and electric hydraulic control valves, steering systems, and operating temperatures.
2) Dimensions and weights for battery compartments and counterweights on various models.
3) Mast speed specifications for different models in feet per minute for lifting and lowering loads at rated capacity and without a load.
4) Procedures for removing and repairing components of the steering wheel, column, and control unit.
Yamaha G1 Golf Car Service Repair Manualjksmeremmd
This is the Highly Detailed factory service repair manual for theYAMAHA G1 GOLF CAR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YAMAHA G1 GOLF CAR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYAMAHA G1 GOLF CAR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Hyster b274 (h50 ct) forklift service repair manualhhjsekmdmm
This document provides specifications and repair information for lift truck models S50CT and H50CT, including:
- Lifting capacities, counterweight weights, tire sizes, fuel capacities, fluid capacities, and electrical specifications.
- Procedures for removing and disassembling the drive axle, including draining fluid, removing wheels and brakes, and separating the drive axle from the transmission.
- Instructions for cleaning, inspecting, and replacing worn parts of the disassembled drive axle.
- Steps for reassembling and reinstalling the drive axle, including applying sealant, tightening fasteners, and positioning the drive axle in the lift truck frame.
Nissan forklift electric n01 series service repair manualfjjskekskemmm
This document provides:
1) An overview of service notices for the GN01 model and 1997 N01 model, including new high-performance models and technical improvements.
2) A technical bulletin on applied models and service notices for the GN01 1997 model, including new features and specification changes.
3) Dimensional drawings and specifications for N01-U models for European countries and the U.S. and Canada, including overall dimensions, ground clearances, and lift capacities.
This document provides an overview and service manual for the Thumpstar Off Road motorcycle range. It contains important safety warnings and outlines the contents and organization of the manual. The manual is intended for technicians with basic motorcycle maintenance knowledge. It provides service procedures, specifications, torque values and other technical information needed to properly service the motorcycle. Symbol definitions are included to identify specific service procedures.
Hyster k019 (h6 xm 12ec europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Cummins diesel engines and Kion lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, mast speeds, hydraulic system specifications, transmission specifications, and torque specifications for servicing components. The document contains model-specific data for H8-H16XM lift trucks.
Hyster c004 (s120 e) forklift service repair manualfjsjefksekkksemm
This document provides instructions for servicing and repairing steering axles on various lift truck models. It describes the components of the steering axle assembly and different types of pivot mounts used. Procedures are provided for removing and installing steering axles with stub shaft mounts and rubber mounts. The document also provides instructions for removing and servicing wheel hubs, spindles, bearings and tie rods. Safety warnings are given for putting lift trucks on blocks or stands when performing maintenance.
Hyster d010 (s30 xm) forklift service repair manualudjjsjkkddkmme
The document provides an overview of the components and operation of a single-speed powershift transmission, including:
1) The transmission contains forward and reverse clutch assemblies, a torque converter, transmission pump, control valve, and differential assembly to transfer power from the engine to the wheels.
2) The torque converter uses fluid to hydraulically connect the engine to the transmission without a direct mechanical connection. It can multiply engine torque under heavy loads.
3) The forward and reverse clutch assemblies use hydraulic pressure to engage one clutch, transmitting power from the input shaft to either the forward or reverse gears and output pinion.
Suzuki DT15C (1988) outboard motors Service Repair Manualfudjfjjskwekmem
This is the Highly Detailed factory service repair manual for theSUZUKI DT15C (1988) OUTBOARD MOTORS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.SUZUKI DT15C (1988) OUTBOARD MOTORS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Lubrication
Fuel System
Ignition System
Cooling System
Power Head
Manual Starter
Lower Unit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveSUZUKI DT15C (1988) OUTBOARD MOTORS Service Repair Workshop Manual.
Thanks for visiting!
- The document provides specifications and repair information for STIHL chain saw models 028, 038.
- It describes the construction and operation of the chain drive, clutch, and chain brake. The clutch disengages through centrifugal force as engine speed increases. The chain brake is a spring-loaded band that stops chain rotation when engaged.
- Troubleshooting and repair instructions are provided for disassembling and servicing these components. Tightening torques and specifications are included to aid repair work.
Hyster d005 (h60 e europe) forklift service repair manualujfdjjkskkdme
This document provides instructions for servicing GM engines. It describes removing and installing the cylinder head and valve mechanism. Key steps include using a compressor tool to remove the valve springs, cleaning carbon from the combustion chambers, inspecting the valves and valve guides for wear, and checking clearances. The valve seats can be repaired with a cutter tool if damaged, or the cylinder head replaced if not repairable. Rocker arm studs should also be replaced if damaged.
Hyster l177 (h40 ft) forklift service repair manualfujdjffjkskemme
This document provides instructions for removing the drive axle, differential, and wet disc brake from Hyster lift trucks. It involves raising the truck, removing the wheels and mast assembly, draining fluids from the drive axle, disconnecting hoses and cables, and removing mounting hardware and shafts. Detailed steps are provided to disassemble the reduction gear assembly, including removing pins, gears, bearings, and other components. Safety warnings are included to prevent injury when putting the truck on blocks, draining tires, and working on pressurized systems.
Hyster r005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster j019 (h10 xm 12ec europe) forklift service repair manualdujfjjksekmmd
This document provides specifications and repair instructions for differentials and related components. It includes:
1) Instructions for removing the differential carrier from the axle housing, including draining oil, disconnecting drivelines, and using pry bars and jacks.
2) Details on removing the differential and ring gear from the carrier, noting some carriers do not include all parts.
3) Tables listing specifications like speeds, capacities, pressures and weights for various lift truck models.
Hyster e114 (e25 z) forklift service repair manualfdujdfjjsekkem
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible through a check valve.
Hyster e114 (e30 z) forklift service repair manualfujjsefjkskem
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible using a check valve.
Hyster e114 (e35 z) forklift service repair manualfuksfemmeme
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible through a check valve.
Hyster e114 (e40 zs) forklift service repair manualuskekmemm
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation to turn the steer tires, though steering is still possible if the hydraulic pump fails via a check valve.
Hyster e114 (e25 z) forklift service repair manualusfjjsjekkemm
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, allowing the steering axle to turn the steer tires even when the hydraulic pump is not operating.
Hyster e114 (e40 zs) forklift service repair manualfujdjjskekwmem
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation to turn the steer tires, even when the steering pump is not operating due to a check valve. Turning the steering wheel rotates parts in the control unit to direct oil to one side of the steering cylinder, turning the truck. Specifications and repair procedures are also included.
Hyster e114 (e35 z) forklift service repair manualufjsjejkksemme
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and hydraulic steering cylinder. The steering control unit is a rotary valve that controls the direction and flow of hydraulic oil to the steering cylinder, which actuates the steering linkage and steer tires. Turning the steering wheel rotates parts in the control unit to allow oil flow to one side of the steering cylinder, causing the truck to turn in that direction. The steering housing provides mounting points and can be adjusted for operator comfort.
Hyster e114 (e30 z) forklift service repair manualfujdfjjskekmwem
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, allowing the steering axle to turn the steer tires even when the hydraulic pump is not operating.
Hyster e114 (e30 z) forklift service repair manualfujdwjjsekkemme
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, allowing the steering axle to turn the steer tires even when the hydraulic pump is not operating.
Hyster e114 (e40 zs) forklift service repair manualvvcauswe274kkkmm
This document provides information about service repairs for steering housings and steering control units. It describes the components of the steering system, including the steering column assembly, steering housing, steering control unit, and steering wheel. The steering housing can be adjusted for operator comfort and houses the steering column and control levers. The steering system is hydraulic and uses a steering control unit to direct hydraulic fluid to steer the axle, even if the steering pump fails. Specifications for torque values, hydraulic pressures and capacities are provided.
Hyster e114 (e25 z) forklift service repair manualfjsjefksekkksemm
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible through a check valve.
Hyster e114 (e35 z) forklift service repair manualfsefkksefmme
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible through a check valve.
This document provides an overview and service manual for the Thumpstar Off Road motorcycle range. It contains important safety warnings and outlines the contents and organization of the manual. The manual is intended for technicians with basic motorcycle maintenance knowledge. It provides service procedures, specifications, torque values and other technical information needed to properly service the motorcycle. Symbol definitions are included to identify specific service procedures.
Hyster k019 (h6 xm 12ec europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Cummins diesel engines and Kion lift trucks. It includes counterweight weights, basic truck weights, engine specifications like oil capacities and pressures, mast speeds, hydraulic system specifications, transmission specifications, and torque specifications for servicing components. The document contains model-specific data for H8-H16XM lift trucks.
Hyster c004 (s120 e) forklift service repair manualfjsjefksekkksemm
This document provides instructions for servicing and repairing steering axles on various lift truck models. It describes the components of the steering axle assembly and different types of pivot mounts used. Procedures are provided for removing and installing steering axles with stub shaft mounts and rubber mounts. The document also provides instructions for removing and servicing wheel hubs, spindles, bearings and tie rods. Safety warnings are given for putting lift trucks on blocks or stands when performing maintenance.
Hyster d010 (s30 xm) forklift service repair manualudjjsjkkddkmme
The document provides an overview of the components and operation of a single-speed powershift transmission, including:
1) The transmission contains forward and reverse clutch assemblies, a torque converter, transmission pump, control valve, and differential assembly to transfer power from the engine to the wheels.
2) The torque converter uses fluid to hydraulically connect the engine to the transmission without a direct mechanical connection. It can multiply engine torque under heavy loads.
3) The forward and reverse clutch assemblies use hydraulic pressure to engage one clutch, transmitting power from the input shaft to either the forward or reverse gears and output pinion.
Suzuki DT15C (1988) outboard motors Service Repair Manualfudjfjjskwekmem
This is the Highly Detailed factory service repair manual for theSUZUKI DT15C (1988) OUTBOARD MOTORS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.SUZUKI DT15C (1988) OUTBOARD MOTORS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Lubrication
Fuel System
Ignition System
Cooling System
Power Head
Manual Starter
Lower Unit
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveSUZUKI DT15C (1988) OUTBOARD MOTORS Service Repair Workshop Manual.
Thanks for visiting!
- The document provides specifications and repair information for STIHL chain saw models 028, 038.
- It describes the construction and operation of the chain drive, clutch, and chain brake. The clutch disengages through centrifugal force as engine speed increases. The chain brake is a spring-loaded band that stops chain rotation when engaged.
- Troubleshooting and repair instructions are provided for disassembling and servicing these components. Tightening torques and specifications are included to aid repair work.
Hyster d005 (h60 e europe) forklift service repair manualujfdjjkskkdme
This document provides instructions for servicing GM engines. It describes removing and installing the cylinder head and valve mechanism. Key steps include using a compressor tool to remove the valve springs, cleaning carbon from the combustion chambers, inspecting the valves and valve guides for wear, and checking clearances. The valve seats can be repaired with a cutter tool if damaged, or the cylinder head replaced if not repairable. Rocker arm studs should also be replaced if damaged.
Hyster l177 (h40 ft) forklift service repair manualfujdjffjkskemme
This document provides instructions for removing the drive axle, differential, and wet disc brake from Hyster lift trucks. It involves raising the truck, removing the wheels and mast assembly, draining fluids from the drive axle, disconnecting hoses and cables, and removing mounting hardware and shafts. Detailed steps are provided to disassemble the reduction gear assembly, including removing pins, gears, bearings, and other components. Safety warnings are included to prevent injury when putting the truck on blocks, draining tires, and working on pressurized systems.
Hyster r005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Hyster j019 (h10 xm 12ec europe) forklift service repair manualdujfjjksekmmd
This document provides specifications and repair instructions for differentials and related components. It includes:
1) Instructions for removing the differential carrier from the axle housing, including draining oil, disconnecting drivelines, and using pry bars and jacks.
2) Details on removing the differential and ring gear from the carrier, noting some carriers do not include all parts.
3) Tables listing specifications like speeds, capacities, pressures and weights for various lift truck models.
Hyster e114 (e25 z) forklift service repair manualfdujdfjjsekkem
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible through a check valve.
Hyster e114 (e30 z) forklift service repair manualfujjsefjkskem
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible using a check valve.
Hyster e114 (e35 z) forklift service repair manualfuksfemmeme
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible through a check valve.
Hyster e114 (e40 zs) forklift service repair manualuskekmemm
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation to turn the steer tires, though steering is still possible if the hydraulic pump fails via a check valve.
Hyster e114 (e25 z) forklift service repair manualusfjjsjekkemm
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, allowing the steering axle to turn the steer tires even when the hydraulic pump is not operating.
Hyster e114 (e40 zs) forklift service repair manualfujdjjskekwmem
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation to turn the steer tires, even when the steering pump is not operating due to a check valve. Turning the steering wheel rotates parts in the control unit to direct oil to one side of the steering cylinder, turning the truck. Specifications and repair procedures are also included.
Hyster e114 (e35 z) forklift service repair manualufjsjejkksemme
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and hydraulic steering cylinder. The steering control unit is a rotary valve that controls the direction and flow of hydraulic oil to the steering cylinder, which actuates the steering linkage and steer tires. Turning the steering wheel rotates parts in the control unit to allow oil flow to one side of the steering cylinder, causing the truck to turn in that direction. The steering housing provides mounting points and can be adjusted for operator comfort.
Hyster e114 (e30 z) forklift service repair manualfujdfjjskekmwem
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, allowing the steering axle to turn the steer tires even when the hydraulic pump is not operating.
Hyster e114 (e30 z) forklift service repair manualfujdwjjsekkemme
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, allowing the steering axle to turn the steer tires even when the hydraulic pump is not operating.
Hyster e114 (e40 zs) forklift service repair manualvvcauswe274kkkmm
This document provides information about service repairs for steering housings and steering control units. It describes the components of the steering system, including the steering column assembly, steering housing, steering control unit, and steering wheel. The steering housing can be adjusted for operator comfort and houses the steering column and control levers. The steering system is hydraulic and uses a steering control unit to direct hydraulic fluid to steer the axle, even if the steering pump fails. Specifications for torque values, hydraulic pressures and capacities are provided.
Hyster e114 (e25 z) forklift service repair manualfjsjefksekkksemm
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible through a check valve.
Hyster e114 (e35 z) forklift service repair manualfsefkksefmme
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering system, including the steering column, steering control unit, and steering housing. The steering housing holds the steering column and control unit, and can be adjusted for operator comfort. The steering control unit is a rotary valve that controls oil flow to the steering cylinder during operation, directing the steer tires. Even without the steering pump operating, limited steering is still possible through a check valve.
Hyster e114 (e30 z) forklift service repair manualfujsefkksekfm
This document provides information about service repairs for steering housings and steering control units. It describes the components of the steering system, including the steering column assembly, steering housing, steering control unit, and steering wheel. The steering housing can be adjusted for operator comfort and houses the steering column and control levers. The steering system is hydraulic and uses a steering control unit to direct hydraulic fluid to steer the axle, even if the steering pump fails. Specifications for torque values, hydraulic pressures and capacities are provided.
Hyster e114 (e25 z) forklift service repair manualfusjejfskekfsmem
This document provides information about service repairs for steering housings and steering control units. It describes the components of the steering system, including the steering column assembly, steering housing, steering control unit, and steering wheel. The steering housing can be adjusted for operator comfort and houses the steering column and control levers. The steering system is hydraulic and uses a steering control unit to direct hydraulic fluid to steer the axle, even if the steering pump fails. Specifications for torque values, hydraulic pressures and capacities are provided.
Hyster e114 (e30 z) forklift service repair manualifkskjdksmem
This document provides specifications and repair information for service of steering components on lift trucks, including:
- The steering system uses a steering control unit mounted to a adjustable steering housing. The housing holds the steering wheel and mounts other controls.
- The steering is hydraulic with no direct mechanical connection between the wheel and axle. A control unit and hydraulic circuit control steering.
- Even if the steering pump fails, limited steering is still possible via a check valve, though difficult without pump operation.
- Specifications and repair procedures are given for the steering housing, control unit, and related hydraulic system components. Additional information can be found in other service manuals.
Hyster e114 (e25 z) forklift service repair manualifksjejdkemm
This document provides a description and repair procedures for a steering housing and steering control unit. It describes the main components of the steering column assembly, including the steering control unit, steering housing, steering column, and steering wheel. The steering housing holds the steering column and control unit, and its position can be adjusted for operator comfort. The steering system is hydraulic and uses a control unit to direct oil flow to the steering cylinder and axle to turn the steer tires, even if the steering pump fails. The control unit operates via a rotary valve controlled by the steering wheel position.
Hyster e114 (e35 z) forklift service repair manualiekkdmmem
This document provides information about service repair for steering housings and steering control units. It describes the components of the steering column assembly, including the steering control unit, steering housing, steering column, and steering wheel. The steering housing holds the steering column and control unit, and its position can be adjusted for operator comfort. The steering system is hydraulic and uses a control unit to direct oil flow to the steering cylinder and axle to turn the steer tires, even if the steering pump fails. Operation of the steering control unit involves a spool, sleeve, and rotor that direct oil flow based on the position of the steering wheel. Specifications for relief pressures and torque values are also provided.
Hyster e114 (e35 z) forklift service repair manualfjjskekkdmme
This document provides specifications and repair information for service of steering components on lift trucks, including:
- The steering system uses a steering control unit mounted to a adjustable steering housing. The housing holds the steering wheel and mounts other controls.
- The steering is hydraulic with no direct mechanical connection between the wheel and axle. A control unit and hydraulic circuit control steering.
- Even if the steering pump fails, limited steering is still possible via a check valve, though difficult without pump assistance.
- Specifications and repair procedures are given for the steering housing, control unit, and related hydraulic system components. Additional information can be found in other service manuals.
Hyster e114 (e25 z) forklift service repair manualjfjjsekdmme
This document provides specifications and repair information for service of steering components on lift trucks, including:
- The steering system uses a steering control unit mounted to a adjustable steering housing. The housing holds the steering wheel and mounts other controls.
- The steering is hydraulic with no direct mechanical connection between the wheel and axle. A control unit and hydraulic circuit control steering.
- Even if the steering pump fails, limited steering is still possible via a check valve, though difficult without pump operation.
- Specifications and repair procedures are given for the steering housing, control unit, and related hydraulic system components. Additional information can be found in other service manuals.
Hyster e114 (e40 zs) forklift service repair manualfjskkkdmem
This document provides information about service repair for steering housings and steering control units. It describes the components of the steering column assembly, including the steering control unit, steering housing, steering column, and steering wheel. The steering housing holds the steering column and control unit, and its position can be adjusted for operator comfort. The steering system is hydraulic and uses a control unit to direct oil flow to the steering cylinder and axle to turn the steer tires, even if the steering pump fails. Operation of the steering control unit involves a spool, sleeve, and rotor that direct oil flow based on the position of the steering wheel. Specifications for relief pressures and torque values are also provided.
Similar to Hyster d114 (e1.75 xm europe) forklift service repair manual (20)
This workshop manual provides information for repairing Hino Trucks models 238, 258LP, 268, 338 series equipped with J08E-VB and J08E-VC engines. It contains chapters covering various vehicle systems from the clutch and transmission to brakes, steering, and electrical equipment. Instructions are given for safe vehicle lifting and repair procedures. Torque specifications and recommended lubricants are also included, as well as an information display guide and symptom simulation instructions.
Hyster k005 (h3.50 xm europe) forklift service repair manualfjsjefksekkksemm
The document provides instructions for repairing various components of a lift truck including the counterweight, hood, overhead guard, LED lights, operator restraint system, radiator, and exhaust system. The counterweight repair section describes how to safely remove and install the counterweight using lifting eyebolts and a lifting device. The radiator repair section explains how to drain the coolant before removing the radiator, and notes the need to add coolant after installation. Safety warnings are provided throughout regarding putting the lift truck on blocks and adding additional blocks when removing heavy components to maintain stability.
The document provides instructions for repairing various components of an industrial lift truck, including the counterweight, hood, overhead guard, LED lights, operator restraint system, radiator, and exhaust system. The counterweight repair section describes how to safely remove and install the counterweight using lifting eyebolts and a lifting device. The radiator repair section explains how to drain the coolant before removing the radiator, and notes the need to add coolant after installation. Safety warnings are provided throughout regarding the need to stabilize the lift truck during component removal to prevent tipping.
Hyster h177 (h3.20 xm) forklift parts catalogue manualfjsjefksekkksemm
This document is a parts manual for a Challenger H2.00-H3.20XM truck. It is divided into 13 sections covering the frame, engines, fuel system, electrical system, transmission, steering, brakes, hydraulics, mast systems, and options. Section 1 covers the frame and includes diagrams and part numbers for components of the frame and floorplates.
Hyster g019 (h10.00 xm 12ec europe) forklift service repair manualfjsjefksekkksemm
This document provides instructions for removing and installing the hydraulic tank on a lift truck. Key steps include draining the hydraulic oil, disconnecting hoses and cables, removing mounting hardware, and lifting the tank off the frame. The tank should be inspected for cracks, leaks or other damage before cleaning and reinstallation. Safety precautions are outlined due to potential fire hazards from hydraulic fluid vapors.
Hyster g007 (h250 hd) forklift service repair manualfjsjefksekkksemm
This document provides instructions for removing and installing major components on a Hyster lift truck, including the air cleaner, exhaust system, hood assembly, and hydraulic tank. The removal and installation procedures are described in step-by-step format with accompanying diagrams and part labels. Safety warnings are included throughout regarding preventing sparks and supporting heavy components during the repair process.
Hyster d098 (e80 z) forklift service repair manualfjsjefksekkksemm
This document provides descriptions and service procedures for parts of an electric forklift frame, including the frame, counterweight assembly, overhead guard, hood and seat assembly, access panels, and label positions. It also describes removing the traction motor. Key points include:
- The frame is a single weldment that mounts other components like the counterweight, overhead guard, steering and drive axles.
- Floor plates and panels can be removed for access to hydraulic and electrical systems.
- Spacers in the battery compartment prevent battery movement and must be adjusted properly.
- The overhead guard, hood, seat, and battery restraint are removed and installed following specific procedures.
- The counterweight
Hyster c108 (e2.50 xl europe) forklift service repair manualfjsjefksekkksemm
This document provides information about steering systems for electric lift trucks. It describes the components of power steering and power steering with on-demand systems. The key components are the steering wheel, optical encoder, activator, steering control unit, steering pump motor, steering pump, and hydraulic steering motor or steering cylinder. It also provides repair instructions for components like the steering wheel and column assembly.
Hyster c008 (h650 c) forklift service repair manualfjsjefksekkksemm
1) The document provides information about repairing various types of gear pumps, including single-stage and tandem pumps. It describes the basic components and operation of gear pumps.
2) The repair procedures include removing the pump, disassembling it, cleaning and inspecting parts, and assessing wear on gears, shafts, and housings. Proper part orientation and seal positioning is important when reassembling the pump.
3) Worn or damaged seals are a common cause of pump failure. The document provides guidance on inspecting seals and determining if they are too hard, soft, or damaged from high temperatures.
Hyster b024 (s155 xl2) forklift service repair manualfjsjefksekkksemm
This document provides repair procedures for differentials. It describes the typical components of a differential assembly, including the housing, ring and pinion gear set, and differential assembly. The procedures explain how to remove the differential carrier from the axle housing, disassemble the differential assembly into its main components, and remove the drive pinion and pinion carrier. Detailed steps are provided for tasks like draining fluids, removing mounting hardware, and using presses and pullers to separate parts while taking safety precautions.
Cummins onan generator set with power command 3100 controller model (dqaa ) s...fjsjefksekkksemm
This document is a service manual that provides information for troubleshooting and servicing generator sets and their components. It includes sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, day tank fuel transfer pumps, optional enclosure fuel tank systems, and wiring diagrams. The manual provides technical specifications and maintenance procedures for various generator set parts.
Cummins onan generator set with power command 3100 controller model (dfbf ) s...fjsjefksekkksemm
This document is a service manual that provides information for troubleshooting and servicing generator sets and their components. It includes sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, day tank fuel transfer pumps, optional enclosure fuel tank systems, and wiring diagrams. The manual provides technical specifications and maintenance procedures for various generator set parts.
Cummins onan generator set with power command 3100 controller model (dfbc ) s...fjsjefksekkksemm
This document is a service manual that provides information for troubleshooting and servicing generator sets and their components. It includes sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, day tank fuel transfer pumps, optional enclosure fuel tank systems, and wiring diagrams. The manual provides technical specifications and maintenance procedures for various generator set parts.
Case tv370 tier 4 b (final) alpha series compact track loader service repair ...fjsjefksekkksemm
This document provides instructions for locking the loader arms and tilting the cab on radial lift skid steer and compact track loaders. It warns of crushing hazards and outlines safety procedures, including never entering or exiting the cab while the loader arms are raised and unsupported. It instructs having two people, with one removing the support strut while the operator remains in the cab.
Case sv340 tier 4b (final) alpha series skid steer loader service repair manu...fjsjefksekkksemm
This document is a service manual that provides maintenance and repair instructions for SR270/SV340 skid steer loaders and TR340/TV380 compact track loaders with Tier 4B engines. It contains sections on the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork and decals. Safety information and instructions are provided at the beginning, along with information on torque specifications, basic shop and assembly instructions, fluids and lubricants, and product identification. Repair and maintenance should only be performed by qualified
Case sv250 tier 4 a alpha series skid steer loader service repair manual pin ...fjsjefksekkksemm
This document is a service manual for Case skid steer loaders and compact track loaders. It provides information on safety procedures, torque specifications, product identification, and maintenance of the engine, front axle, rear axle, and other systems. The document contains copyright information, part numbers, and replaces prior service manuals. It instructs technicians to follow procedures carefully when servicing equipment.
Case sr240 tier 4 b (final) and stage iv alpha series skid steer loader servi...fjsjefksekkksemm
This document is a service manual for skid steer loaders and compact track loaders. It contains sections on the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, and platform, cab, bodywork, and decals. The introduction provides important safety notices for equipment servicing and lists the models covered.
Case sr240 tier 4 b (final) alpha series skid steer loader service repair manualfjsjefksekkksemm
This document is a service manual that covers safety procedures, specifications, repair and maintenance instructions for Case Construction skid steer loaders and compact track loaders, including the SR210, SR240, SV280, TR270, and TR310 models. It addresses topics like the engine, fuel system, exhaust system, cooling system, lubrication system, hydraulic systems, electrical systems, cab controls, and more. Safety is emphasized, and qualified service personnel following the proper procedures are required for repairs. Specifications are provided.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
2. 8000 SRM 621 Hydraulic System
Wheels and Tires
Item Specification
Torque Value of Drive Wheel Bolts 330 N•m (243 lbf ft)
Torque Value of Steer Wheel Nuts (Pneumatic) 155 N•m (114 lbf ft)
Torque Value of Spindle Nut for Steer Wheels 68 N•m (50 lbf ft), loosen, then
3 N•m (2 lbf ft)
Size of Standard Drive Tires 18 × 5 × 12-1/8*
Size of Optional Drive Tires 18 × 5 × 12-1/8*
Size of Standard Steer Tires 14 × 4-1/2 × 8*
Size of Optional Steer Tires 15 × 5 × 11-1/4*
*Electric Compound Tires are available in smooth or lug tread. Polyurethane and nonmarking compounds
are only available on smooth tread. NEVER mix types of tread or tire compound on the same truck.
Counterweights
Model Weight
+30 kg (66 lb)
0 kg (0 lb)
(E25XM, E25XM2) 337 kg (743 lb)
E1.50XM, (E30XM, E30XM2) 514 kg (1133 lb)
E1.75XM (E35XM, E35XM2) 626 kg (1380 lb)
E2.00XMS (E40XMS, E40XM2S) 739 kg (1629 lb)
Hydraulic System
Item Specification
Relief Pressure, Lift System 17.9 ±0.3 MPa (2600 ±45 psi)
Relief Pressure, Tilt System 15.75 ±0.3 MPa (2250 ±45 psi)
Relief Pressure, Auxiliary 15.75 ±0.3 MPa (2250 ±45 psi)
Relief Pressure, Steering System 5400 ±345 kPa (783 ±50 psi)
*Oil temperature 54 to 66 C (130 to 150 F).
1
3. 8000 SRM 621 Battery Specifications
Battery Specifications
Battery Size Minimum/
Maximum*
Weight
Model
Min.
Compartment
Size
Length × Width Length Width
Mini-
mum
Maxi-
mum
(E25XM, E25XM2) 794 kg
(1750 lb)
E1.50XM
(E30XM, E30XM2)
839 kg
(1850 lb)
E1.75XM
(E35XM, E35XM2)
917 kg
(2022 lb)
E2.00XM
(E40XMS, E40XM2S)
695 × 879 mm
(27.4 × 34.6 in.)
784/876 mm
(30.9/34.5 in.)
943 kg
(2079 lb)
(E25XM, E25XM2) 794 kg
(1750 lb)
E1.50XM
(E30XM, E30XM2)
839 kg
(1850 lb)
E1.75XM
(E35XM, E35XM2)
917 kg
(2022 lb)
E2.00XM
(E40XMS, E40XM2S)
695 × 909 mm
(27.4 × 35.8 in.)
784/876 mm
(30.9/34.5 in.)
654/692 mm
(25.8/
27.2 in.)
943 kg
(2079 lb)
1132 kg
(2496 lb)
617 mm (24.3 in.) = maximum height for all batteries. This dimension is 31.75 mm (1.25 in.) less with
optional battery rollers.
Tolerances of the battery compartment are +3 and 0 mm (+0.12 and 0 in.). The battery size column
shows the size range that will permit the battery to still fit into a battery compartment.
Battery compartment length is front to back. Width is side to side. The length dimension of the battery
must fit within the battery compartment side-to-side dimension with a clearance of 0 to 13 mm (0 to 0.5 in.)
maximum. Battery width must fit within the battery compartment front-to-back dimension.
WARNING
The battery must fit the battery compartment so that the battery restraint system will operate
correctly. Use only batteries with the correct length shown in this table. Adjust the spacer plate
and side spacers to prevent the battery from moving more than 13 mm (0.5 in.) forward or back-
ward.
3
4. Battery Specifications 8000 SRM 621
BATTERY HEIGHT SPECIFICATIONS (HOODS AND BATTERY TYPES)
Maximum Height - Standard Hood
Cell Connectors and Terminals
Model
Battery
Type With Battery
Tray*
With Cell
Cap** Electrically
Insulated***
Not
Electrically
Insulated**
E1.50-2.00XMS
(E25-40XMS,
E25-40XM2S)
I
594 mm
(23.4 in.)
594 mm
(23.4 in.)
574 mm
(22.6 in.)
E1.50-2.00XMS
(E25-40XMS,
E25-40XM2S)
II, III
607 mm
(23.9 in.)
NA NA NA
NA = Not Applicable
BATTERY TYPES
TYPE I - Battery without a cover as part of the battery.
TYPE II - Battery with a cover that is flat and is fastened to case of battery. Cover opens from FRONT
OR REAR when installed in lift truck.
TYPE III - Battery with a cover that is flat and is fastened to case of battery. Cover opens from SIDE
when installed in lift truck.
*Battery Types II and III bottom of battery to highest point (top of cover or top of hinge).
**Minimum height below top of battery tray is 4 mm (0.16 in.).
***Minimum height below top of battery tray is 0.5 mm (0.02 in.).
WARNING
The battery must fit the battery compartment so that the battery restraint system will operate
correctly. Use only batteries with the correct length shown in the table above. Adjust the spacer
plate and side spacers to prevent the battery from moving more than 13 mm (0.5 in.) forward,
backward, or to the side.
4
5. 8000 SRM 621 Maximum Carriage and Tilt Creep Rates
Maximum Height - Raised Hood
Cell Connectors and Terminals
Model
Battery
Type With Battery
Tray*
With Cell
Cap** Electrically
Insulated***
Not
Electrically
Insulated**
E1.50-2.00XMS
(E25-40XMS,
E25-40XM2S)
I
625 mm
(24.6 in.)
627 mm
(24.7 in.)
607 mm
(23.9 in.)
E1.50-2.00XMS
(E25-40XMS,
E25-40XM2S)
II, III
640 mm
(25.2 in.)
NA NA NA
NA = Not Applicable
BATTERY TYPES
TYPE I - Battery without a cover as part of the battery.
TYPE II - Battery with a cover that is flat and is fastened to case of battery. Cover opens from FRONT
OR REAR when installed in lift truck.
TYPE III - Battery with a cover that is flat and is fastened to case of battery. Cover opens from SIDE
when installed in lift truck.
*Battery Types II and III bottom of battery to highest point (top of cover or top of hinge).
**Minimum height below top of battery tray is 4 mm (0.16 in.).
***Minimum height below top of battery tray is 0.5 mm (0.02 in.).
WARNING
The battery must fit the battery compartment so that the battery restraint system will operate
correctly. Use only batteries with the correct length shown in the table above. Adjust the spacer
plate and side spacers to prevent the battery from moving more than 13 mm (0.5 in.) forward,
backward, or to the side.
Maximum Carriage and Tilt Creep Rates
Vertical Creep at Carriage Tilt Creep at Cylinder RodHydraulic Oil
Temperature mm/Min in./Min /Min mm/Min in./Min
20 C (68 F) 2.2 mm 0.09 in. 0.10 0.63 mm 0.03 in.
30 C (86 F) 3.3 mm 0.13 in. 0.15 0.95 mm 0.04 in.
40 C (104 F) 6.3 mm 0.25 in. 0.29 1.83 mm 0.07 in.
50 C (122 F) 10.0 mm 0.39 in. 0.47 2.97 mm 0.12 in.
60 C (140 F) 14.6 mm 0.57 in. 0.68 4.30 mm 0.17 in.
5
9. Thank you very much
for your reading. Please
Click Here Then Get
More Information.
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
10. 8000 SRM 621 Torque Specifications
169 mm (6.7 in.) Motor and 12 cc (0.73 in.3
) Lift Pump*
Lifting Lowering
Rated Load No Load Rated Load No LoadModel Mast V
m/sec m/sec m/sec m/sec
Two-Stage LFL 48 0.330 0.503 0.508 0.472
Two-Stage FFL 48 0.330 0.493 0.462 0.371E1.50XM
Three-Stage FFL 48 0.340 0.472 0.478 0.411
Two-Stage LFL 48 0.325 0.503 0.508 0.472
Two-Stage FFL 48 0.320 0.493 0.462 0.371E1.75XM
Three-Stage FFL 48 0.315 0.472 0.478 0.411
Two-Stage LFL 48 0.295 0.503 0.508 0.472
Two-Stage FFL 48 0.295 0.493 0.462 0.371E2.00XMS
Three-Stage FFL 48 0.284 0.472 0.478 0.411
LFL = Limited Free Lift
FFL = Full Free Lift
*Oil temperature 54 to 66 C (130 to 150 F). Lifting speeds (valve fully open) ±10% acceptable. No Load
lowering speeds are minimum values. Rated Load lowering speeds are maximum values. Load center is
610 mm (24 in.).
Torque Specifications
FRAME
Overhead Guard
Front leg M12 x 1.75 x 40 or 50 capscrews
66 N•m (49 lbf ft)
Rear leg M12 x 1.75 x 60 capscrews with
nuts 72 N•m (53 lbf ft)
Counterweight Capscrews
upper 380 N•m (260 lbf ft)
lower (tow pin area) 66 N•m (50 lbf ft)
Traction Motor to Speed Reducer Housing
M12 × 1.75 × 35 hex head screws (7)
71 to 83 N•m (52 to 61 lbf ft)
MAST
Capscrews for Mast Assembly Mounts
at Drive Axle
90 N•m (66 lbf ft)
Capscrews for Sideshift Carriage Mount
435 N•m (320 lbf ft)
Bolts for Lift Cylinder Mounts
53 N•m (39 lbf ft)
Nuts for Lowering Control Valve
18 N•m (13 lbf ft)
Setscrews for Chain Sheave
8 N•m (71 lbf in)
Nuts for Free-Lift Cylinder Brackets
38 N•m (28 lbf ft)
Bolts for Free-Lift Cylinder Brackets
53 N•m (39 lbf ft)
Capscrew for Free-Lift Cylinder Hose Sheave
41 N•m (30 lbf ft)
21
11. 1
STEERING SYSTEMS FOR ELECTRIC LIFT TRUCKS
GENERAL
Therearetwodifferentsteeringsystemsavailable:Pow-
er Steering and Power Steering with On–Demand. The
difference in the components for each system can be
found in FIGURE 1. Also see FIGURE 2. This section
covers the description, disassembly, assembly, checks
and adjustments and the troubleshooting of the steering
system. There is a description for each part of the steer-
ing system at the beginning of each repair section. On
units with three wheels, the steering system turns the
MasterDriveUnit(MDU)tosteerthelifttruck.Onunits
that have four wheels and a steering axle, the steering
system operates the steering cylinder to steer the lift
truck.
Additional information for the components of the steer-
ing system is found in the following sections:
MASTER DRIVE UNIT, 630 SRM 363, contains the
description and repair of the MDU for the
A1.00–1.5.XL (A20–30XL).
THE STEERING AXLE, 1600 SRM XXX. The SRM
number is different for different models. See the Table
Of Contents of the Service Manual for your unit to see
the correct description and repair procedures for the
steering axle.
THE STEERING CONTROL UNIT, 1600 SRM
XXX. The SRM number is different for different mod-
els. See the Table Of Contents of the Service Manual for
your unit to see the correct description and repair proce-
dures for the steering control unit.
A modification has been made in the manifold assembly
of the steering control unit used in the A1.00–1.50XL
(A20–30XL) trucks that is different than the unit de-
scribed in THE STEERING CONTROL UNIT, 1600
SRM 54. The four hydraulic ports are in the bottom of
the steering control unit. These ports connect to the four
hydraulic hoses for the steering system. The four hy-
draulic ports on the side of the steering control unit are
not used.
FIGURE 1. POWER STEERING COMPONENTS
11960
1. STEERING WHEEL
2. OPTICAL ENCODER
3. ACTIVATOR
4. STEERING CONTROL UNIT
5. STEERING PUMP MOTOR
6. STEERING PUMP
7. PRESSURE SWITCH
(EXCEPT A1.00–1.50XL (A20–30XL)
8. HYDRAULIC STEERING MOTOR
9. STEERING CHAIN
10. MASTER DRIVE UNIT
11. STEERING CYLINDER
12. STEERING AXLE
FROM
TANK
TO TANK
THREE WHEEL UNITS
MANY FOUR WHEEL UNITS
* E3.50–5.50XL (E70–120XL) ONLY
11122
5
6
1
4
8
9
10
12
11
7
7*
2#
3#
# POWER STEERING WITH
ON–DEMAND ONLY
12. 2
1
2
3
4
5
6
7
8
9
1. STEERING CYLINDER
2. TO STEERING CONTROL UNIT
3. PRESSURE CHECK FITTING
4. PUMP MOTOR
5. STEERING PUMP
6. PRESSURE SWITCH
(ON–DEMAND STEERING ONLY)
7. RETURN TO HYDRAULIC TANK
8. FROM HYDRAULIC TANK
9. MOUNT FOR STEERING MOTOR
906043700
1/3 Rev 1
FIGURE 2. POWER STEERING COMPONENTS, E1.50–2.00XMS (E25–40XMS)
13. 3
FIGURE 3. STEERING SYSTEM HYDRAULIC SCHEMATIC
1 2
3
4
5
6
7
89
1. MOTOR
2. STEERING PUMP
3. PRESSURE TEST PORT
4. STEERING CONTROL UNIT
5. STEERING WHEEL
8. HYDRAULIC TANK
9. MAIN CONTROL VALVE
10. FILTER
10
6. STEERING CYLINDER
OR MOTOR
7. PRESSURE SWITCH
6
M
DESCRIPTION
(See FIGURE 1. and FIGURE 3.)
The steering system used on these lift trucks is a hydrau-
lic system that does not have a mechanical connection
between the steering wheel and the MDU or steering
axle. The control of the steering is through a hydraulic
circuit. An electric motor drives a hydraulic pump. To
energize the motor, the key switch must be “ON” and
the seat switch must be closed. When the key switch is
first moved to the “ON” position, forward or reverse di-
rection must also be selected for the steering system to
operate. After the starting sequence is completed, the
electric motor on the Power Steering pump will run con-
tinuously. The pump motor with the On–Demand sys-
tem will operate only when the steering wheel is turned.
When the electric motor operates the pump, hydraulic
oil flows through the power steering system.
When the steering wheel is rotated to steer the lift truck,
the hydraulic oil is routed to the steering motor at the
MDU or to the steering cylinder on units with a steering
axle. There is a delay between the last rotation of the
steering wheel and the system deenergizing in the Pow-
er Steering with On–Demand system. This delay keeps
the system operating when the operator is not turning
the steering wheel during straight travel. The delay is
approximately one second on some truck models to be-
tween 4 and 5 seconds on other models.
A gear on the shaft of the steering wheel drives the gear
of the optical encoder as the steering wheel is moved to
steer the lift truck. The optical encoder sends a signal to
the activator. The activator completes the battery nega-
tive circuit for the steering contactor to energize the
steering pump motor. See FIGURE 4. (1 of 2) and
FIGURE 16. for the electrical connections for Power
Steering with the On–Demand system. Also see the
DIAGRAMS section for your unit. The steering control
unit is also operated by the steering wheel to direct oil to
the steering cylinder or hydraulic motor.
NOTE: On units with a steering axle, there is a pressure
switch in the hydraulic circuit. Anytime the system is
operational and the system pressure is above 2.07 kPa
(300 psi) the switch energizes the contactor for the steer-
ing pump motor. This pressure switch allows the system
to continue to operate even if the steering wheel is not
moving.
UnitsthathaveOn–Demandsteeringhaveanopticalen-
coder circuit. A gear on the shaft of the steering wheel
moves the gear of the optical encoder when the steering
wheel is moved. See page 1 of 3 and 3 of 3 for
FIGURE 4. The optical encoder sends a signal to the ac-
tivator assembly. The activator assembly completes the
battery negative circuit for the steering contactor to en-
ergize the steering pump motor. The steering wheel also
operates the steering control unit. When the steering
14. 4
wheel is rotated to steer the lift truck, the hydraulic oil is
sent to the steering cylinder on the steering axle.
The steering control unit is a rotary valve operated by
the steering wheel. During the steering operation, the
steering control unit controls the direction of flow and
volume of oil to control the direction and degree of turn.
On units with an MDU, the hydraulic motor has a
sprocket on the output shaft that rotates the MDU by a
steering chain. On units that have a steer axle, the steer-
ing cylinder moves the steering linkage to move the
steer wheels. Hydraulic oil returns from the hydraulic
motororcylindertothesteeringcontrolunitandthenre-
turns to the hydraulic tank.
If for any reason the steering pump does not operate, a
check valve permits the steering control unit to still con-
trol the steering system. The lift truck is difficult to steer
when the steering pump is not operating, but the steering
control unit can operate the hydraulic motor or steering
cylinder and makes steering possible.
STEERING WHEEL AND COLUMN
ASSEMBLY (See FIGURE 4.)
The upper end of the steering shaft has splines for the
steeringwheel.Alargenutholdsthesteeringwheelonto
the steering shaft. The horn button is the cover for the
center of the steering wheel. The lower end of the steer-
ing shaft has splines or a tang to engage the steering con-
trolunit.Apushrodallowsthehornbuttontoactuatethe
horn switch.
The steering column is adjustable and is held in position
by a latch. The steering column position can be changed
for different operators. The steering column must be
raised to the UP position to provide clearance for the
seat when removing or installing the battery. There is a
cover on the steering column for access to the steering
control unit, key switch, horn switch, direction switch
(if installed), optical encoder and on some units, the ac-
tivator.Theactivatoronmanyofthe“XM”unitsisunder
the instrument panel to the left of steering column.
Removal Of The Assembly Components
NOTE: This procedure is for the removal of all compo-
nents of the steering column assembly. Usually it is not
necessary to remove all of the components. Do only
those steps of the procedure necessary to remove the
component you need to remove.
1. Disconnect the battery and attach a tag on the truck
battery connector stating “DO NOT CONNECT BAT-
TERY”. Raise the steering column to the UP position.
Remove the access cover from the steering column.
2. Remove the the housing of the steering column. Re-
move key switch. Make an identification of the electri-
cal wires and disconnect them from the key switch. Dis-
connect the plug from the display panel if installed.
3. If installed, remove the handle, boot, and large nut
that fastens the direction switch. Remove the direction
switch from the housing of the steering column. Make
an identification of the electrical wires and disconnect
them from the direction switch.
4. Remove the capscrew that fastens the bracket for the
horn switch to the housing of the steering column. Move
the horn switch and bracket away from the steering col-
umn.
5. Remove the horn cover, snap ring and base plate (not
part of Petri steering wheel). Lift the push rod and ad-
juster spool out the top of the steering shaft. Remove the
large hex nut and remove the steering wheel from the
shaft. A puller makes removal of the steering wheel eas-
ier, but not all steering wheels have puller holes.
6. If the lift truck has On–Demand steering, remove the
optical encoder and activator and the brackets. See
FIGURE 4. (1 of 3). It is not necessary to remove the
activator if it is not in the steering column. See
FIGURE 4. (3 of 3). Make an identification of the elec-
trical wires and disconnect them from the assemblies.
7. Make an identification of the hydraulic hoses at the
steering control unit so that the they can be connected
correctly during assembly. Some hoses have swivel fit-
tingstopermitdisconnectingatthesteeringcontrolunit.
Disconnect the other hoses at the base of the cowl, the
control valve or the steering pump. Remove all mount-
ing clamps so that the hoses will turn freely and not be-
come twisted. Disconnect the hydraulic hoses at the bot-
tom of the steering control unit. Install plugs at all hose
ports and hoses to prevent dirt from entering the system.
8. Remove the capscrews, lock washers and lock plates
that fasten the steering column to the pivots on the lift
truck. Remove the steering column from the lift truck.
Make sure the electrical wires and the hydraulic hoses
are not damaged as the steering column is removed.
15. 5
For correct connection,
see DIAGRAMS SRM for
your lift truck.
11959
FIGURE 4. STEERING WHEEL AND STEERING COLUMN ASSEMBLY (1 of 3)
TRW
DANFOSS
INPUT
OUTPUT
RIGHT TURN
LEFT TURN
INPUT
OUTPUT
RIGHT TURN
LEFT TURN
GRN
REDBLK
WHT
29
5
9
27
28
2
26
25
12
2
32
30
30
24
31
34
28
3433
MANY “XL”
UNITS
19
16. 6
29
16
FIGURE 4. STEERING WHEEL AND STEERING COLUMN ASSEMBLY (2 of 3)
11959
1. STEERING COLUMN
2. STEERING CONTROL UNIT
3. BRACKET
4. STEERING WHEEL
5. STEERING SHAFT
6. HORN COVER
7. BASE PLATE
8. BEARING
9. PLASTIC TUBE
10. PLASTIC WASHER
21. BRACKET
22. LATCH PIVOT PIN
23. COTTER PIN
24. KEY SWITCH
25. CLAMP
26. BRACKET
27. SNAP RING
28. TRUCK WIRE
HARNESS
29. SOCKET HEAD SCREW
30. ACTIVATOR
31. BRACKET
32. OPTICAL ENCODER
AND BRACKET
33. DRIVE GEAR AND
SET SCREW
34. ENCODER/ACTIVATOR
WIRE HARNESS
PETRI STEERING WHEEL
19
9
8
18
1514
629
11. SPRING
12. LATCH
13. LOCK RING
14. ADJUSTER SPOOL NUT
15. STEERING WHEEL NUT
16. EXTERNAL SNAP RING
17. INTERNAL SNAP RING
18. PUSH ROD
19. PIN
20. HORN SWITCH
4
7
6
13
15
20
19
18
11
10
9
5
3
16
2
12
22
23
21
1
Legend for 1 & 2 of 3
OTHER
“XL” UNITS
817
17
14
17. 7
FIGURE 4. STEERING WHEEL AND STEERING COLUMN ASSEMBLY (3 of 3)
10. REAR COVER
11. MOUNT
12. CAPSCREW
13. PLATE
14. ALLEN HEAD CAPSCREW
15. PIVOT SHAFT
16. SPRING
17. FRONT COVER
18. BRACKET
19. OPTICAL ENCODER
AND BRACKET
20. DRIVE GEAR AND
SET SCREW
21. ENCODER/ACTIVATOR
WIRE HARNESS
22. ACTIVATOR (Under Instrument
Panel To Left Of Steering Column)
23. TRUCK WIRE HARNESS
1
2 3
45
6
7
8
9
10
11
12
13
14
15
16
1. STEERING WHEEL, SHAFT AND
ON–DEMAND STEERING PARTS
2. STEERING CONTROL UNIT
3. SPRING
4. WASHER
5. COTTER PIN
6. PIN
7. ROD
8. KNOB
9. SCREW
17
18
GRN
REDBLK
WHT
22
21
23
For correct connection,
see DIAGRAMS SRM for
your lift truck.
12
21
20
MANY “XM”
UNITS
18. 8
9. Remove the steering shaft as follows:
a. Move the plastic tube and washer toward the
steering control unit and compress the spring for
the horn switch. Then remove the pin that goes
through the steering shaft and engages the plastic
tube.
b. Remove the external snap ring that holds the
bearing in the steering column. On units that have
On–Demand steering, loosen the set screw in the
gear on the shaft. The return spring, washer, and
tube are removed at the same time as the steering
shaft and bearing are removed. Use a small pry-
bar at the bottom of the steering shaft near the
steering control unit to remove the steering shaft
and bearing (also, return spring, washer, and
tube) from the steering column.
10. Remove the two capscrews that hold the steering
control unit and the bracket to the steering column. Re-
move the four capscrews or nuts that fasten the steering
control unit to the bracket.
NOTE: See the correct repair procedures to make re-
pairs to the steering control unit. See the section, THE
STEERING CONTROL UNIT, 1600 SRM XXX.
The SRM number is different for different models. See
the Table Of Contents of the Service Manual for your
unit for
Installation Of The Assembly Components
NOTE: This procedure is for the installation of all com-
ponents of the steering column assembly. Usually it is
not necessary to install all of the components. Do only
thosestepsoftheprocedurenecessarytoinstallthecom-
ponent you need to install.
1. Install the steering column on the cowl mounts. Lu-
bricate the pivots with multi–purpose grease and install
the capscrews into the housing.
2. Fasten the two halves of the mount bracket to the
steering control unit. Make sure to install bracket for
activator if the activator is in the steering column. Install
the steering control unit assembly into the steering col-
umn. Make sure to install the horn switch and the switch
bracket as well as the two wire clamps on the same
mount capscrews.
3. If removed,installthewiresonthekeyswitchasiden-
tified during removal. Install the key switch.
4. If removed, install the wires on the direction switch as
identified during removal. Install the direction switch in
the housing and install the large nut, boot and handle.
5.Installthebearingonthesteeringshaft.Thesealofthe
bearing must be toward the steering wheel. Install the
snap ring in the groove on the steering shaft.
6. Put the steering shaft through the opening for the
bearing in the steering housing. Install the gear for On–
Demand steering onto the steering shaft. Install the pin
that holds the plastic tube and flange for the hornswitch.
Install the plastic tube, the plastic flange and the spring
onto the steering shaft. Push the steering shaft into the
splines or align the tang of the steering control unit. In-
stall the snap ring that holds the bearing in the steering
housing.
7. If removed, install the optical encoder and bracket as-
sembly on the column housing. Make sure the pinion
gear of the optical encoder and the drive gear on the
steeringshaftarecorrectlyaligned.Tightenthesetscrew
for the drive gear. Install the wires on the activator as
identified during removal. The correct connections are
also shown in FIGURE 4. Install the activator on the
bracket fastened to the steering control unit
8. Install the steering wheel. Install the large hex nut
onto the steering shaft. Install the push rod and adjuster
spool into the steering shaft. Install the base plate (not
part of Petri steering wheel), the lock ring and the horn
cover.
WARNING
The hydraulic hoses MUST be connected to the cor-
rect ports and fittings or the steering system will not
operate as expected. This operation that is not ex-
pected can cause damage or personal injury. Con-
nect the hoses as identified during removal.
9. Connect the hydraulic hoses to the steering control
unit, the cowl, the control valve or the steering pump as
removed during removal. Make sure each hydraulic
hose is connected to the correct ports or fittings as iden-
tified during removal.
10. Connect the wire connectors at the bottom of the
steering column. Install the access cover on the steering
column.
19. 9
POWER STEERING MOTOR AND PUMP
DESCRIPTION (See FIGURE 5.)
The power steering motor and pump assembly is under
the floor plate on all units except the J2.00–3.20XM
(J40–65XM), E1.50–2.00XMS (E25–40XMS) and
E3.50–5.50XL (E70–120XL) units. The
E1.50–2.00XMS (E25–40XMS) and the
E3.50–5.50XL (E70–120XL) units have the motor and
pump assembly under the battery compartment. The
J2.00–3.20XM (J40–65XM) units have the motor and
pump assembly mounted behind the battery compart-
ment. The power steering motor and pump operate as
described in DESCRIPTION in front part of this manu-
al.
NOTE: See also the section HYDRAULIC SYSTEM
for your lift truck model for additional information for
the power steering pump of the “E” series lift trucks.
REMOVAL AND DISASSEMBLY,
E1.25–3.00XL (E25–60XL),
J2.00–3.00XL (J40–60XL),
E2.00–3.20XM (E45–65XM),
N30XMH
(See FIGURE 5., FIGURE 8. and
FIGURE 9.)
NOTE: On some units, the power steering motor must
be removed from the mounts on the frame to replace the
brushes. Other motors require removal of the end bell to
replace the brushes.
1. Disconnect the battery and attach a tag on the truck
battery connector stating “DO NOT CONNECT BAT-
TERY”.
2. Remove the floor plate.
3. Install identification tags on the power cables and dis-
connect them from the power steering motor.
4. Attach identification tags on the electrical wires and
disconnect them from the pressure switch.
5. Put a drain pan under the pump. Install identification
tags on the hydraulic hoses and disconnect them from
the power steering pump. Quickly put plugs in the ends
ofthehosesandthepumpportstokeepoilfromdraining
and dirt from entering the system.
6. Remove the two clamp capscrews and nuts, the wash-
ers and the two mounts. Remove the motor, pump, and
bracket as an assembly.
7. Check the motor brushes. See the sections PERIOD-
ICMAINTENANCE,8000SRMXXX (for yourtruck
model) and DC MOTOR MAINTENANCE, 620
SRM 294 for additional information for inspection of
the brushes and commutator.
8. If the motor must be disassembled for cleaning or re-
pairs, remove the pump so that a new oil seal can be in-
stalled. Before disassembling the motor, make match
marks for alignment on the end plates and the motor
housing.Thesemarksarenecessarytoassemblethemo-
tor correctly. To disassemble the motor, see FIGURE 8.
Also see FIGURE 9.
9. Make a note of the position of the inlet and outlet ports
of the pump for correct alignment to the motor during
assembly. Remove the capscrews that fasten the pump
to the motor and carefully remove the pump. Remove
the O–ring at the pump shaft.
REMOVAL AND DISASSEMBLY,
E3.50–5.50XL (E70–120XL)
(See FIGURE 5. and FIGURE 9.)
1. Remove the battery and put the lift truck on blocks as
described in the OPERATING MANUAL or the sec-
tion PERIODIC MAINTENANCE, 8000 SRM 291.
2. Install identification tags on the power cables and dis-
connect them from the pump motor.
3. Attach identification tags on the electrical wires and
disconnect them from the pressure switch.
4. Put a drain pan under the pump. Install identification
tags on the hydraulic hoses and disconnect them from
the power steering pump. Quickly put plugs in the ends
ofthehosesandthepumpportstokeepoilfromdraining
and dirt from entering the system.
5. The capscrews for the motor mount are accessible
from under the truck. Remove the mount capscrews and
the motor and pump as one assembly.
6. Check the motor brushes. See the sections, PE-
RIODIC MAINTENANCE, (for your truck model) and
DC MOTOR MAINTENANCE, 620 SRM 294 for