The document describes shunt resistors for energy meters. Key points: - The resistors have extremely low resistance values (<0.5nH) and negligible temperature coefficients (3μV/°C). - They are designed for precision energy meter and current sensing applications. - The resistors have a 4-terminal Kelvin connection, high pulse power ratings, and can be supplied soldered together for lower resistance values.

1. • 4-Terminal (Kelvin) connection design.
•Extremely low resistance values.
•Very low inductance (<0.5nH)
• Negligible EMF (3μ V/°C)
POWER METAL STRIP
SHUNT RESISTORS FOR ENERGY METERS
HVE
SERIES
Size 5515
e : info@htr-india.com
www.htr-india.com
1/5
Rev Date : 22/03/2020
AEC-Q200Qualified

2. PHYSICAL CONFIGURATION POWER METAL STRIP
SHUNT RESISTORS FOR ENERGY METERS
HVE
SERIES
Size 5515
e : info@htr-india.com
www.htr-india.com
APPLICATIONS
• Designed for precision energy meter applications.
• Current sensing in bus bar.
• Current sensing in welding equipments.
• Current sensing in battery chargers.
FEATURES
• Upto 5W permanent power in free air.
• High pulse power rating (1KW for 0.1 Sec - Single pulse).
• Punched component of Electron Beam Welded Copper / Manganina Copper / Copper Strip (Cu Mn 12Ni).
• These resistors can also be supplied soldered together in parallel connection in stacked format to create lower resistance value &
enhanced heat dissipation.
2/5
Rev Date : 22/03/2020
DIMENSIONAL TABLE
Sr HTR type Resistance Tolerance A B C D E F
No. Value
1 HVE5W R00016 R00016 ±1, ±3, ±5, ±10% 7.0 11 40 55.0 15 2.0
2 HVE5W R00025 R00025 ±1, ±3, ±5, ±10% 7.0 11 40 55.0 15 2.0
3 HVE5W R0002 R0002 ±1, ±3, ±5, ±10% 7.0 11 40 55.0 15 2.0
4 HVE5W R0003 R0003 ±1, ±3, ±5, ±10% 7.0 11 40 55.0 15 2.0
5 HVE5W R0004 R0004 ±1, ±3, ±5, ±10% 7.0 11 40 55.0 15 2.0
6 HVE5W R0005 R0005 ±1, ±3, ±5, ±10% 8.0 11 40 55.0 15 1.5
Size Range Tolerance
0.5 to 3 ±0.1
3 to 6 ±0.1
6 to 30 ±0.2
30 to 120 ±0.3
120 to 400 ±0.5
400 to 1000 ±0.8
1000 to 2000 ±1.2
Note: These resistors can also be supplied soldered together in parallel connection / stacked (refer picture on page 1 of this datasheet) to create
lower resistance value & enhanced heat dissipation.
0.8
A
B
C
D
(7.5)
(7.5)
Resistor (Manganin)
(Cu Mn 12Ni)
Copper
All dimensions
in mm
Copper
T=Thickness 0.5 to 1.5
Ø6.2
Ø6.2
Adjustment
Calibration
2.0
2.0
2.0
2.0
7.5
E
3.5
F
3.6
(2.0)
18.2
14.2
11.2
4.0
R2.0
R0.7
±0.5
3
9’0
R0.5
R0.5 R0.7
R0.5
15
Dimensions Tolerances ISO 2768

3. POWER METAL STRIP
SHUNT RESISTORS FOR ENERGY METERS
HVE
SERIES
Size 5515
e : info@htr-india.com
www.htr-india.com
3/5
Rev Date : 22/03/2020
ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS
PARAMETER / PERFORMANCE TEST / METHOD PERFORMANCE REQUIREMENTS
5W
Power Rating For Manganina (Cu Mn 12 Ni) -
Full power dissipation at 105°C & linearly derated to zero at +135°C.
Inductance < 0.5nH to < 3nH
Temperature Range - 55°C to +140°C
Voltage Rating / LimitingVoltage / Max.WorkingVoltage
(Subject to max. terminal temperature of 120°C)
Temperature Coefficient of Resistance
(Ambient temperature range 20°C - 60°C)
LifeTest / Operational Life - 2000 h rated power with
Temperature limitation onTerminal kept at 120° C
Thermal EMV (0-60° C) 0.3µV/°C
Internal heat resistance (Rthi) From 2°K/W
P x R
< 20 ppm / K (depending on resistance value)
∆R ± 1% - Average
0.3 %
0.2 %
0.2 %
0.2 %
0.2 %
0.1%
0.1%
0.1%
>95% coverage
no damage
connection DIAGRAM
Thermal Shock
MIL-STD-202 method 107-B1
ShortTime Overload
MIL-R-26E (5 times rated power, 5 Sec)
Solderability
MIL-STD-202 method 208
Resistance to Solvents
MIL-STD-202 method 215, 2.1a, 2.1d
LowTemperature Storage & Operation
MIL-STD-26E
Resistance to Soldering Heat
MIL-STD-202 method 210B
Moisture Resistance
MIL-STD-202 method 106
Shock
MIL-STD-202 method 213-A
Vibration, High Frequency
MIL-STD-202 method 204B
Storage Life at ElevatedTemperature
MIL-STD-202 method 108-F
HighTemperature Exposure 125°C, 2000h 0.3 %

4. 4/5
www.htr-india.com
TYPICAL POWER DERATING CURVE FOR
RESISTOR WHEn full power is at 105° C
Pulse power for continuous operation.
This curve is only valid for the resistance value R0002.
The shape of the curve in the range below 0.1 sec will be different for other resistance values.
In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
Typical Temperature dependance of
the electrical resistance
Typical CURVE SHOWING LONG TERM STABILITY
OF MANGANINA (Cu Mn 12Ni) RESIstors at 140ºC
MAXIMUM PULSE ENERGY WITH RESPECT TO PULSE POWER FOR PERMANENT OPERATION
1
0.75
0.5
0.25
0
0 20 40 60 80 100 120 140 160 180
1.25
Terminal Temperature [°C]
P/PNom
Manganina (CNMn12NI)
e : info@htr-india.com
0
Resistance change (%)
Time (h)
1000
1
0.75
0.5
0.25
0
-0.75
-0.5
-0.75
-1
2000 3000 4000 5000
Rev Date : 22/05/2019
-40
-1
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-20 0 20 40 60 80 100 120
Temperature [°C]
dR/R20 [%]
Limiting Curve
Typical temperature dependence of a HVE resistor
140
POWER METAL STRIP
SHUNT RESISTORS FOR ENERGY METERS
HVE
SERIES
Size 5515
10000
1000
100
10
1
10000 1000
0.000
0.001
0.01
0.1
1
10
100
0.1
0.01
0.0001 0.001 0.01 0.1 10 100
Pulse width [s]
Pulse
energy
[J]
Power
[W]
1

5. e : info@htr-india.com
5/5
www.htr-india.com
ordering information AS AN EXAMPLE
packaging
SERIES HTR TYPE No. Type RESISTANCE VALUE TOLERANCE MARKING OF RESISTOR
HTR
HVE HVE5W R0002 ±5% HVE5W R0002 ±5% R0002 5%
DATECODE
HTR
HVE HVE5W R00016 ±5% HVE5W R00016 ±5% R00016 5%
DATECODE
HTR
HVE HVE5W R0005 ±5% HVE5W R0005 ±5% R0005 5%
DATECODE
SR NO. HTR TYPE pieces 2-STACKED & 4-STACKED & INNER BOX DIMENSION
PER INNER BOX SOLDERED PIECES SOLDERED PIECES (Length X Width X Height))
PER INNER BOX PER INNER BOX
1 HVE5W R00016 250 100 50 127mm X 87mm X 30mm
2 HVE5W R00025 250 100 50 127mm X 87mm X 30mm
3 HVE5W R0002 200 100 50 127mm X 87mm X 30mm
4 HVE5W R0003 250 100 50 127mm X 87mm X 30mm
5 HVE5W R0004 250 100 50 127mm X 87mm X 30mm
6 HVE5W R0005 200 100 50 127mm X 87mm X 30mm
STORAGE CONDITION
Shelf Life (Packed) : Temp 25°C to 35°C, Humidity 30 to 80% RH, Shelf life - 12 months
Floor Life for organically treated pieces (Unpacked) : Temp 25°C to 35°C, Humidity 30 to 80% RH, Floor life - 15 days
Floor Life for plated pieces (Unpacked) : Temp 25°C to 35°C, Humidity 30 to 80% RH, Floor life - 6 months.
Rev Date : 22/03/2020
POWER METAL STRIP
SHUNT RESISTORS FOR ENERGY METERS
HVE
SERIES
Size 5515
• Part no of HVE, with resistance value R0002 and 5% tolarance.
HTR part no. will be HVE5W R0002 ±5%.
• Part no of HVE, with resistance value R00016 and 5% tolarance.
HTR part no. will be HVE5W R00016 ±5%.
• Part no of HVE, with resistance value R0005 and 5% tolarance.
HTR part no. will be HVE5W R0005 ±5%.