Install filter between the “To Process” and “From\nProcess” pipes for maximum differential pressure\nutilization. This also ensures side stream filtration,\nthrottling the flow through the filter using the outlet\nvalve on the filter. Install 1” NPT or Socket weld\nisolation valves on the pressure inlet and outlet.\nPurge all air from the filter using the vent valve on\ntop. Note the inlet and outlet pressures to monitor\nloading of the equipment.

1. HEAT TRANSFER FLUIDHEAT TRANSFER FLUIDHEAT TRANSFER FLUIDHEAT TRANSFER FLUIDHEAT TRANSFER FLUID
& OIL FILTRATION SYSTEM& OIL FILTRATION SYSTEM& OIL FILTRATION SYSTEM& OIL FILTRATION SYSTEM& OIL FILTRATION SYSTEM
LIQUID
PROCESS
SYSTEMS, INC.
■ Patented System Cleans Fluids Without
Disrupting Process Operation
■ Reduce Wear of Seals, Pumps, Valve Stems, etc.
■ Reduce Fouling in Heat Exchanger Surfaces
■ Minimize Unscheduled Maintenance Down Time
■ Reduce Overall Heat Transfer Fluid Costs
■ Increase Heat Transfer Efficiency
■ Increase Production Rates
Flow Rates 5 USGPM or 19 LPM
to 100 USGPM or 379 LPM
HTF SERIES
TO
650ºFor 345ºC
&150 PSIGor
10.5 BAR
HEAT TRANSFER FLUIDHEAT TRANSFER FLUIDHEAT TRANSFER FLUIDHEAT TRANSFER FLUIDHEAT TRANSFER FLUID
& OIL FILTRATION SYSTEM& OIL FILTRATION SYSTEM& OIL FILTRATION SYSTEM& OIL FILTRATION SYSTEM& OIL FILTRATION SYSTEM
1025-A Technology Drive
Indian Trail, NC 28079-5514
Toll Free: (888)786-1101
Telephone: (704) 821-1115
Fax: (704) 821-1190
E-Mail: info@lps-filtration.com
Websites: lps-filtration.com
liquidprocesssystems.com

2. HTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONSHTF SERIES SPECIFICATIONS
LEDOM
WOLF
ETAR
/TELNI
TELTUO
DETAMITSE
SNOISNEMID
MC/NIDxH
DETAMITSE
THGIEW
GKSBL
fo.ON
*STNEMELE
C01AFTH
5 MPGSU
ro
MPL91
ro"1
MM4.52
"5.7x"02
91x15
roSBL04
GK81
1
C01BFTH
51 MPGSU
ro
MPL75
ro"1
MM4.52
"5.7x"04
91x201
roSBL06
GK72
1
C01CFTH
03 MPGSU
ro
MPL411
ro"5.1
MM83
"11x"64
82x711
roSBL571
GK08
2
C01DFTH
06 MPGSU
ro
MPL722
ro"2
MM15
"51x"64
83x711
roSBL052
GK411
4
C01EFTH
001 MPGSU
ro
MPL973
ro"2
MM15
"81x"35
64x431
roSBL053
GK951
7
PARALLEL INSTALLATIONPARALLEL INSTALLATIONPARALLEL INSTALLATIONPARALLEL INSTALLATIONPARALLEL INSTALLATION
Install filter between the “To Process” and “From
Process” pipes for maximum differential pressure
utilization. This also ensures side stream filtration,
throttling the flow through the filter using the outlet
valve on the filter. Install 1” NPT or Socket weld
isolation valves on the pressure inlet and outlet.
Purge all air from the filter using the vent valve on
top. Note the inlet and outlet pressures to monitor
loading of the equipment. Replace the element when
the (∆P) (differential pressure) reaches 25 PSID.
SERIES INSTALLATIONSERIES INSTALLATIONSERIES INSTALLATIONSERIES INSTALLATIONSERIES INSTALLATION
Install filter on the “From Process” pipe. Install 1”
NPT or Socket weld isolation valves on the filter
inlet and outlet. Install a by pass around the filter
including a by pass throttle valve. Throttle valve
must always be partially or fully open, never closed
to ensure side stream filtration of the oil. Purge all
air from the filter using the vent valve on top. Note
the inlet and outlet pressures to monitor the loading
of the element. Replace the element when the (∆P)
(differential pressure) reaches 25 PSID.
This print is the property of LPSi and is furnished as confidential information only. It must not be
reproduced in any manner nor submitted to any outside party for any purpose without written permission.
*Elements range from 100, 50, 25 and 10 microns particle size removal.
SERIES INSTALLATION 1025-A Technology Drive • Indian Trail, NC 28079
1” or
25.4 mm
NPT or SW
1” or
25.4 mm
NPT or SW
1.5” or
38 mm
SW or FLG
2” or
51 mm
SW or FLG
2” or
51 mm
SW or FLG
24” x10”
44” x10”
50” x15”
53” x19”
53” x22”
LIQUID
PROCESS
SYSTEMS, INC.
PARALLEL INSTALLATION
ISOLATION
VALVE
FILTER
CLOSURE
PRESSURE
GAUGE P2
TO
PROCESS
FROM
PROCESS
HEAT USERS
HEAT
USERS
PRESSURE
GAUGEP1
ISOLATION VALVE
FILTER HOUSING
BY-PASS/
THROTTLE VALVE
DRAIN PLUG
VENT VALVE
PORTABLE HOT OIL
TEMPERATURE
CONTROLLER
PORTABLE HOT OIL
TEMPERATURE
CONTROLLER
TO
PROCESS
FROM
PROCESS
HEAT USERS
HEAT
USERS
PRESSURE
GAUGEP1
INLET VALVE
FULL OPEN
FILTER HOUSING
DRAIN PLUG
VENT VALVE
FILTER CLOSURE
PRESSURE
GAUGEP2