This document provides troubleshooting information for the HP DesignJet 2500CP and 2000CP printers. It lists common error codes and their potential causes and solutions. The document also provides tips on issues like print quality problems, component failures, and calibration errors. Technicians are advised to follow the steps provided to methodically diagnose and resolve issues.
Essay Mojo is one of the most reliable writing services that cover all the disciplines of academic writing. It assures high quality content after conducting in-depth research on the prospective subject at the most reasonable prices.
The document provides a user's guide for the HP DesignJet 2500CP/2000CP printer, covering topics such as using the front panel, working with media, controlling print quality, and maintaining the printer. It includes information on loading and unloading media, replacing ink systems, nesting pages to reduce waste, and troubleshooting image quality issues. The guide also details how to view and change settings through the front panel such as page size, margins, and print quality.
The document provides an overview of computing eigenvalues and eigenvectors. Eigenvalues are the roots of the characteristic polynomial of a matrix A. Eigenvectors corresponding to an eigenvalue λ are non-zero vectors that satisfy the equation (A - λI)v = 0. Examples are provided to demonstrate finding the eigenvalues and eigenvectors of 2x2 matrices by solving the characteristic polynomial and resulting systems of equations. The eigenspace corresponding to an eigenvalue is the span of its eigenvectors.
El documento proporciona una guía para la realización de un trabajo sobre un país, sugiriendo incluir una descripción general del país con su nombre, capital, número de habitantes, idioma y sistema de gobierno; información sobre el clima, relieve y medios naturales, incluyendo mapas; detalles sobre las ciudades principales y la capital; datos demográficos como la población total, tasas de natalidad y mortalidad; y una sección sobre la economía del país, incluyendo los sectores más importantes y su pertenencia a organizaciones económicas intern
Este documento narra la trayectoria profesional del autor desde sus inicios trabajando en el negocio familiar hasta convertirse en un experto vendedor. Comienza describiendo sus primeras experiencias atendiendo un mostrador y luego negociando con proveedores. Más adelante consigue su primer empleo formal como vendedor de productos químicos, donde aprende sobre estrategias básicas de ventas como realizar visitas a clientes y establecer pronósticos de ventas. El autor reflexiona sobre cómo sus diferentes experiencias lo han ayudado a desar
La empresa ofrece productos, servicios, asesorías y herramientas para el comercio e industria, con el objetivo de promover el desarrollo del talento humano en las organizaciones. Busca satisfacer las necesidades de desarrollo de sus clientes a través de soluciones adecuadas que fomenten el crecimiento económico y la sinergia entre equipos de trabajo.
La empresa ofrece una variedad de productos y servicios de asesoría para el desarrollo empresarial y del talento humano en organizaciones internacionales, incluyendo asesoría empresarial, capacitación, desarrollo de equipos de trabajo, comercio internacional, y evaluación y optimización de procesos. Su objetivo es satisfacer las necesidades de desarrollo de sus clientes a través de soluciones efectivas que promuevan el crecimiento económico.
Essay Mojo is one of the most reliable writing services that cover all the disciplines of academic writing. It assures high quality content after conducting in-depth research on the prospective subject at the most reasonable prices.
The document provides a user's guide for the HP DesignJet 2500CP/2000CP printer, covering topics such as using the front panel, working with media, controlling print quality, and maintaining the printer. It includes information on loading and unloading media, replacing ink systems, nesting pages to reduce waste, and troubleshooting image quality issues. The guide also details how to view and change settings through the front panel such as page size, margins, and print quality.
The document provides an overview of computing eigenvalues and eigenvectors. Eigenvalues are the roots of the characteristic polynomial of a matrix A. Eigenvectors corresponding to an eigenvalue λ are non-zero vectors that satisfy the equation (A - λI)v = 0. Examples are provided to demonstrate finding the eigenvalues and eigenvectors of 2x2 matrices by solving the characteristic polynomial and resulting systems of equations. The eigenspace corresponding to an eigenvalue is the span of its eigenvectors.
El documento proporciona una guía para la realización de un trabajo sobre un país, sugiriendo incluir una descripción general del país con su nombre, capital, número de habitantes, idioma y sistema de gobierno; información sobre el clima, relieve y medios naturales, incluyendo mapas; detalles sobre las ciudades principales y la capital; datos demográficos como la población total, tasas de natalidad y mortalidad; y una sección sobre la economía del país, incluyendo los sectores más importantes y su pertenencia a organizaciones económicas intern
Este documento narra la trayectoria profesional del autor desde sus inicios trabajando en el negocio familiar hasta convertirse en un experto vendedor. Comienza describiendo sus primeras experiencias atendiendo un mostrador y luego negociando con proveedores. Más adelante consigue su primer empleo formal como vendedor de productos químicos, donde aprende sobre estrategias básicas de ventas como realizar visitas a clientes y establecer pronósticos de ventas. El autor reflexiona sobre cómo sus diferentes experiencias lo han ayudado a desar
La empresa ofrece productos, servicios, asesorías y herramientas para el comercio e industria, con el objetivo de promover el desarrollo del talento humano en las organizaciones. Busca satisfacer las necesidades de desarrollo de sus clientes a través de soluciones adecuadas que fomenten el crecimiento económico y la sinergia entre equipos de trabajo.
La empresa ofrece una variedad de productos y servicios de asesoría para el desarrollo empresarial y del talento humano en organizaciones internacionales, incluyendo asesoría empresarial, capacitación, desarrollo de equipos de trabajo, comercio internacional, y evaluación y optimización de procesos. Su objetivo es satisfacer las necesidades de desarrollo de sus clientes a través de soluciones efectivas que promuevan el crecimiento económico.
This document provides programming instructions for the P7 Drive. It describes the initialization, sequence, and speed reference parameters. The initialization parameters allow selecting the language, access level, and initializing the drive settings. The sequence parameters determine the run command source and speed reference source, which can be set to the digital operator, analog input, serial communication, or option board. The speed reference source sets where the drive receives the speed command signal when in remote mode.
데이타맥스프린터 DATAMAX A-Class 열전사 RFID 바코드프린터엔진 오토라벨러엔진 매뉴얼HION IT
고성능 인쇄 및 응용 프로그램의 요구 사항이 기존 인쇄 엔진이 제공하는 것보다 많은 기능이 필요한 경우 새로운 Datamax A-Class ™로 이동할시기입니다.
A 클래스 모델 : A-4212, A-4310, A-4408, A-4606, A-6212, A-6310
데이타맥스 A-Class 고급 바코드 프린터 엔진 제품군에는 스테인레스 스틸 하드웨어 구성 요소, 모듈식 전자카드 케이지, 현장 설치형 열전사 리본 어셈블리, 원격제어 패널 및 전체 그래픽 디스플레이와 같은 혁신적인 디자인 기능이 많이 포함되어 있습니다.
애플리케이터 통합 인쇄 및 적용을 위해 설계된 A-Class는 산업 표준 통신 인터페이스에 대한 연결 옵션을 갖춘 Datamax I-Class 펌웨어 아키텍처를 사용합니다.
데이타맥스 A 클래스 RFID 옵션은 현재 64비트 또는 96비트 메모리가 있는 EPCglobal Class 1 태그를 수용합니다.
사양 및 요구 사항이 발전함에 따라 더 많은 태그 인코딩 기능이 추가됩니다.
Right-handed printer
Media peel bar
4MB FLASH downloadable program memory
16MB DRAM memory
Two RS-232 serial interfaces, 9pin
One IEEE 1284 compliant parallel interface
One USB v1.1 interface
RS422/RS485 Interface
One applicator interface ports (15pin) with programmable inputs and outputs
Graphics LCD control display with backlight
EFIGS (English, French, Italian, German, and Spanish) LCD languages
AGFA Scalable Font Engine with CG Triumvirate™ Scalable (regular and bold condensed) fonts
Industry standard bar code symbologies
Time and Date battery back up
Static brushes
Host Computer accessible RAM/Flash memory for object temporary storage
DPL command language
Slide in style card cage
Fault handling with reprint or void selection
Parse error-tolerant command language interpretation
Internal test labels for printhead verification, print quality validation, and internal configuration
Resident multiple setup store and restore capability
Time stamp at print capability
Paper retract control after print
Ribbon low detection and warning
Power up diagnostics
Resident option hardware diagnostics
Diagnostic display and modes
Media counters
Front panel security
Input line mode (ASCII text input) capability
Option hardware auto-detection
Scalable Font dynamic font attributes, bold and italics
Firmware upgrades downloadable
Audible Alert
A-CLASS OPTIONS
LEFT-HANDED VERSIONS
DIRECT THERMAL (no ribbon)
RIBBON SAVER
INTERNAL WIRELESS LAN (DMXrfNET)
INTERNAL ETHERNET LAN (DMXNET)
EXTERNAL ETHERNET LAN (DMX-100)
INTERNAL TWINAX/COAX INTERFACE
REMOTE FRONT PANEL DISPLAY
RFID (Encodes EPC Class 1 tags)
EXTERNAL KEYBOARD SUPPORT
8MB FLASH MAIN LOGIC BOARD
LINERLESS (Special Order)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
The document is the user manual for the PCI-1711U Series multifunction PCI card. It provides entry-level 100 kS/s, 12-bit, 16-channel analog and digital I/O. The manual covers installation, configuration, specifications, calibration and programming for the card.
데이타맥스프린터 Datamax M-Class 열전사감열 산업용 범용바코드프린터 매뉴얼HION IT
데이타맥스 M-Class 바코드프린터는 범용프린터로 USB 인쇄 지원을 통한 범용성 및 산업용 모델의 내구성을 더한 프린터 제품입니다.
데이타맥스 M-Class 바코드프린터는 범용프린터 군 중 가격 대비 성능이 가장 뛰어난 모델입니다.
혁신적인 모듈식 설계로 사용자가 현장에서 손쉽운 설치작업이 가능하도록 제작되었습니다.
철강, 자동차, 화학, 제조, 통신, 공공기관, 식품, 제약, 병원, 유통, 물류 창고, 도소매, 택배업체 등 다양한 업계에서 사용됩니다.
Form factor with a small footprint for an industrial printer to fit in tight spaces where work space is a premium
Rugged construction features a precision die-cast aluminum frame
Real time clock for accurate date-time labeling
Multi-language menu available in English, Spanish, German, Italian, and French
5-button, 128x64 LCD graphical backlit display is easy to read, enabling userfriendly label configuration set-up
Field installable options such as cutters, peel & present sensors, and thermal transfer option can be added easily to upgrade a base printer
Versatile media compatibility supports coated side in or coated side out ribbons without reconfiguring the printer or purchasing additional options resulting in easier ribbon inventory management
IntelliSEAQ™ printhead: proactive diagnostic tools allow easy access to printhead performance and history
Software: The M-Class utilizes widely used DPL and supports MCL designer and 123 Print. With the PL-Z and PL-I printer language emulations, users can easily integrate the printer to existing solutions
Increased productivity :
M-Class Mark II keeps up with high label demand applications, boasting 32% faster performance than the nearest competitor in its class. The modular design and field-installable options cut back on downtime and improve efficiency. With its unique form factor, the M-Class Mark II fits easily in tight spaces where work space is a premium.
One printer does it all :
The M-Class Mark II printer can be used in a wide variety of applications with a range of media compatibility, connectivity, emulation support, and options including RFID support. It is easy on the budget with the best value proposition for an industrial strength printer.
MODELS : M-4206
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 6 IPS (152 mm/s)
Resolution : 203 DPI (8 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Not available
MODELS : M-4210
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 10 IPS (254 mm/s)
Resolution : 203 DPI (8 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Available
MODELS : M-4308
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 8 IPS (203 mm/s)
Resolution : 300 DPI (12 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Available
PRINT TECHNOLOGY
Maximum print width : 4.25” (108mm)
Print length range : 0.25” - 99” (6.35mm - 2514.6mm)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
This document is a user guide for the LNP95 Liquid Nitrogen Pump Cooling System made by Linkam Scientific Instruments Ltd. It provides instructions on setting up the system, making connections to the liquid nitrogen dewar and temperature controller, and operating the pump. Safety information and technical specifications for the LNP95 are also included.
This document provides an instruction manual for the Datavideo SE-800 digital video switcher. It includes warnings and precautions, an introduction to the product and its features, installation instructions, operation instructions, and troubleshooting information. The switcher can switch between multiple video and audio sources, and features transitions, effects, color correction, and more. It is designed for applications like production studios, multi-camera shoots, and live event switching.
Dukane proudly offers a full line of data-video projectors, document cameras, visual presenters, interactive products, screens, voice amplification systems, speaker systems, technology carts, accessories and more.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact:
Delia Valdez
Dukane Customer Service Representative
Phone: 800-676-2485
Fax: (630) 584-5156
Email; avsales@dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
1. The document provides instructions for setting up the TM-U325D/U325PD printer, including unpacking, selecting a location, adjusting the paper roll near-end sensor, connecting cables and grounding the printer, installing the ribbon cassette, and installing the paper roll.
2. Setup instructions cover connecting the computer, drawer, and power supply to the appropriate connectors on the bottom of the printer. The document also provides warnings and cautions about using the correct power supply and cables.
3. Adjusting the paper roll near-end sensor involves deciding whether to use included spacers to trigger the sensor at different remaining paper levels, and securing the sensor in place.
This document is the owner's manual for the 01V96i audio mixer. It contains instructions and specifications for the device. The manual covers safety precautions, an overview of the control surface and rear panel, operating basics for the display and controls, connection and setup instructions, a tutorial on basic operations, troubleshooting information, and specifications for the device.
Mini Zipato drive with energy measurement allows the variation in your interior lighting to create a pleasant atmosphere in your home and also help you to reduce your energy consumption. Actually it is able to transmit the instantaneous power consumption (W) and cumulative (KWh) of equipment attached to it.
PowerPlex is an electrical switching and monitoring system that provides enhanced safety, user comfort, and customization potential for boat owners. It switches and monitors electrical loads, enables energy management, and displays alarms. PowerPlex increases flexibility and convenience through features like remote access, lighting concepts, load control scenarios, and touchscreen interfaces. The system ensures reliable operation and immediate alarm notifications through integrated components that are easy to install and configure.
The document provides safety information and instructions for installing and operating a DVR system. It explains how to prepare the area and connect devices before installation. Precautions are given to protect the equipment from damage and optimize performance. The manual also details the functions of the front and rear panels, IR remote control, basic operation including live viewing, playback, search and settings menu, as well as software applications for remote monitoring and configuration.
Taxi led display installation manual(e10 and h1)Max Dan
Tips:
Check the all AC power connections are properly before turn on the power.
l Turn off the power, including LED Board, Terminal Computer, System Box and
Monitor before doing any maintenance.
l Do not touch the power supply when the power is on.
The document summarizes the specifications of the AOP-8070 fanless operator panel PC. It has a 520MHz Marvell PXA270 processor, 128MB RAM, 7" 16:9 WQVGA LCD display, Ethernet and serial port connectivity. It supports Windows CE 6.0 and has CompactFlash storage. Measuring 8.9" x 6.1" x 1.97", it is designed for panel mounting and operates from 10-24V DC power in temperatures from 0-50°C.
This document provides instructions for operating and configuring the GU320B generator controller. It includes:
1. An overview of the controller's display, control keys, and connection ports.
2. Instructions for setting the controller's operation mode (auto, manual, test) and controlling generator start up and shut down.
3. Details on measuring parameters, alarms, communication functions, and technical specifications.
This document provides warnings, cautions, and instructions for the F7 Drive user manual. It warns that the drive should only be installed and operated by qualified personnel according to the manual and codes. It also cautions against modifying the product. The intended use section explains the drive is for industrial applications and must meet certain EU directives if used in Europe.
1) This document is the operation manual for the SHARP Projector model XV-Z20000/DT-5000.
2) It provides important safety warnings and instructions on setting up, connecting, and operating the projector.
3) The manual covers basic operation instructions including turning the projector on/off, selecting inputs, adjusting the image size, and contains troubleshooting information.
The user manual provides step-by-step instructions for installing and configuring the AKCP Door Control Unit (DCU) and its access control components. It describes the DCU hardware, how to wire the DCU to card readers, fingerprint readers, exit buttons, and door locks. It also provides diagrams of typical installations and specifications for cable runs. The manual is intended to guide users through setup and common configurations.
The document provides an owner's manual for LCD colour televisions models DU-30LZ30, DU-37LZ30, and DU-42LZ30. It contains important safety instructions, instructions for installation and connections to external devices, instructions for programming the remote control, and specifications for the televisions. The manual should be read carefully before operating the television and retained for future reference.
A monitor displays the computer's visual output and contains delicate electronics. It should only be cleaned using approved methods and repaired by experts to avoid electric shock. A graphics adapter processes and sends video signals from the computer to the monitor. Common issues include outdated or corrupted drivers, incompatibility between components, loose connections, and overheating. Addressing these issues requires careful inspection and potentially updating or replacing components.
More Related Content
Similar to Hp 2500 CP Quick Reference Service Manual
This document provides programming instructions for the P7 Drive. It describes the initialization, sequence, and speed reference parameters. The initialization parameters allow selecting the language, access level, and initializing the drive settings. The sequence parameters determine the run command source and speed reference source, which can be set to the digital operator, analog input, serial communication, or option board. The speed reference source sets where the drive receives the speed command signal when in remote mode.
데이타맥스프린터 DATAMAX A-Class 열전사 RFID 바코드프린터엔진 오토라벨러엔진 매뉴얼HION IT
고성능 인쇄 및 응용 프로그램의 요구 사항이 기존 인쇄 엔진이 제공하는 것보다 많은 기능이 필요한 경우 새로운 Datamax A-Class ™로 이동할시기입니다.
A 클래스 모델 : A-4212, A-4310, A-4408, A-4606, A-6212, A-6310
데이타맥스 A-Class 고급 바코드 프린터 엔진 제품군에는 스테인레스 스틸 하드웨어 구성 요소, 모듈식 전자카드 케이지, 현장 설치형 열전사 리본 어셈블리, 원격제어 패널 및 전체 그래픽 디스플레이와 같은 혁신적인 디자인 기능이 많이 포함되어 있습니다.
애플리케이터 통합 인쇄 및 적용을 위해 설계된 A-Class는 산업 표준 통신 인터페이스에 대한 연결 옵션을 갖춘 Datamax I-Class 펌웨어 아키텍처를 사용합니다.
데이타맥스 A 클래스 RFID 옵션은 현재 64비트 또는 96비트 메모리가 있는 EPCglobal Class 1 태그를 수용합니다.
사양 및 요구 사항이 발전함에 따라 더 많은 태그 인코딩 기능이 추가됩니다.
Right-handed printer
Media peel bar
4MB FLASH downloadable program memory
16MB DRAM memory
Two RS-232 serial interfaces, 9pin
One IEEE 1284 compliant parallel interface
One USB v1.1 interface
RS422/RS485 Interface
One applicator interface ports (15pin) with programmable inputs and outputs
Graphics LCD control display with backlight
EFIGS (English, French, Italian, German, and Spanish) LCD languages
AGFA Scalable Font Engine with CG Triumvirate™ Scalable (regular and bold condensed) fonts
Industry standard bar code symbologies
Time and Date battery back up
Static brushes
Host Computer accessible RAM/Flash memory for object temporary storage
DPL command language
Slide in style card cage
Fault handling with reprint or void selection
Parse error-tolerant command language interpretation
Internal test labels for printhead verification, print quality validation, and internal configuration
Resident multiple setup store and restore capability
Time stamp at print capability
Paper retract control after print
Ribbon low detection and warning
Power up diagnostics
Resident option hardware diagnostics
Diagnostic display and modes
Media counters
Front panel security
Input line mode (ASCII text input) capability
Option hardware auto-detection
Scalable Font dynamic font attributes, bold and italics
Firmware upgrades downloadable
Audible Alert
A-CLASS OPTIONS
LEFT-HANDED VERSIONS
DIRECT THERMAL (no ribbon)
RIBBON SAVER
INTERNAL WIRELESS LAN (DMXrfNET)
INTERNAL ETHERNET LAN (DMXNET)
EXTERNAL ETHERNET LAN (DMX-100)
INTERNAL TWINAX/COAX INTERFACE
REMOTE FRONT PANEL DISPLAY
RFID (Encodes EPC Class 1 tags)
EXTERNAL KEYBOARD SUPPORT
8MB FLASH MAIN LOGIC BOARD
LINERLESS (Special Order)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
The document is the user manual for the PCI-1711U Series multifunction PCI card. It provides entry-level 100 kS/s, 12-bit, 16-channel analog and digital I/O. The manual covers installation, configuration, specifications, calibration and programming for the card.
데이타맥스프린터 Datamax M-Class 열전사감열 산업용 범용바코드프린터 매뉴얼HION IT
데이타맥스 M-Class 바코드프린터는 범용프린터로 USB 인쇄 지원을 통한 범용성 및 산업용 모델의 내구성을 더한 프린터 제품입니다.
데이타맥스 M-Class 바코드프린터는 범용프린터 군 중 가격 대비 성능이 가장 뛰어난 모델입니다.
혁신적인 모듈식 설계로 사용자가 현장에서 손쉽운 설치작업이 가능하도록 제작되었습니다.
철강, 자동차, 화학, 제조, 통신, 공공기관, 식품, 제약, 병원, 유통, 물류 창고, 도소매, 택배업체 등 다양한 업계에서 사용됩니다.
Form factor with a small footprint for an industrial printer to fit in tight spaces where work space is a premium
Rugged construction features a precision die-cast aluminum frame
Real time clock for accurate date-time labeling
Multi-language menu available in English, Spanish, German, Italian, and French
5-button, 128x64 LCD graphical backlit display is easy to read, enabling userfriendly label configuration set-up
Field installable options such as cutters, peel & present sensors, and thermal transfer option can be added easily to upgrade a base printer
Versatile media compatibility supports coated side in or coated side out ribbons without reconfiguring the printer or purchasing additional options resulting in easier ribbon inventory management
IntelliSEAQ™ printhead: proactive diagnostic tools allow easy access to printhead performance and history
Software: The M-Class utilizes widely used DPL and supports MCL designer and 123 Print. With the PL-Z and PL-I printer language emulations, users can easily integrate the printer to existing solutions
Increased productivity :
M-Class Mark II keeps up with high label demand applications, boasting 32% faster performance than the nearest competitor in its class. The modular design and field-installable options cut back on downtime and improve efficiency. With its unique form factor, the M-Class Mark II fits easily in tight spaces where work space is a premium.
One printer does it all :
The M-Class Mark II printer can be used in a wide variety of applications with a range of media compatibility, connectivity, emulation support, and options including RFID support. It is easy on the budget with the best value proposition for an industrial strength printer.
MODELS : M-4206
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 6 IPS (152 mm/s)
Resolution : 203 DPI (8 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Not available
MODELS : M-4210
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 10 IPS (254 mm/s)
Resolution : 203 DPI (8 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Available
MODELS : M-4308
Print technology : Direct thermal / Thermal transfer (optional)
Print speed : 8 IPS (203 mm/s)
Resolution : 300 DPI (12 dots/mm)
Print Width : 4.25" (108mm)
RFID option : Available
PRINT TECHNOLOGY
Maximum print width : 4.25” (108mm)
Print length range : 0.25” - 99” (6.35mm - 2514.6mm)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
This document is a user guide for the LNP95 Liquid Nitrogen Pump Cooling System made by Linkam Scientific Instruments Ltd. It provides instructions on setting up the system, making connections to the liquid nitrogen dewar and temperature controller, and operating the pump. Safety information and technical specifications for the LNP95 are also included.
This document provides an instruction manual for the Datavideo SE-800 digital video switcher. It includes warnings and precautions, an introduction to the product and its features, installation instructions, operation instructions, and troubleshooting information. The switcher can switch between multiple video and audio sources, and features transitions, effects, color correction, and more. It is designed for applications like production studios, multi-camera shoots, and live event switching.
Dukane proudly offers a full line of data-video projectors, document cameras, visual presenters, interactive products, screens, voice amplification systems, speaker systems, technology carts, accessories and more.
Dukane is an American company serving the education, corporate, government and house of worship markets for over 85 years.
For more information contact:
Delia Valdez
Dukane Customer Service Representative
Phone: 800-676-2485
Fax: (630) 584-5156
Email; avsales@dukane.com
Website: www.Dukane.com/AV
Dukane AV
2900 Dukane Drive
St. Charles, IL 60174
1. The document provides instructions for setting up the TM-U325D/U325PD printer, including unpacking, selecting a location, adjusting the paper roll near-end sensor, connecting cables and grounding the printer, installing the ribbon cassette, and installing the paper roll.
2. Setup instructions cover connecting the computer, drawer, and power supply to the appropriate connectors on the bottom of the printer. The document also provides warnings and cautions about using the correct power supply and cables.
3. Adjusting the paper roll near-end sensor involves deciding whether to use included spacers to trigger the sensor at different remaining paper levels, and securing the sensor in place.
This document is the owner's manual for the 01V96i audio mixer. It contains instructions and specifications for the device. The manual covers safety precautions, an overview of the control surface and rear panel, operating basics for the display and controls, connection and setup instructions, a tutorial on basic operations, troubleshooting information, and specifications for the device.
Mini Zipato drive with energy measurement allows the variation in your interior lighting to create a pleasant atmosphere in your home and also help you to reduce your energy consumption. Actually it is able to transmit the instantaneous power consumption (W) and cumulative (KWh) of equipment attached to it.
PowerPlex is an electrical switching and monitoring system that provides enhanced safety, user comfort, and customization potential for boat owners. It switches and monitors electrical loads, enables energy management, and displays alarms. PowerPlex increases flexibility and convenience through features like remote access, lighting concepts, load control scenarios, and touchscreen interfaces. The system ensures reliable operation and immediate alarm notifications through integrated components that are easy to install and configure.
The document provides safety information and instructions for installing and operating a DVR system. It explains how to prepare the area and connect devices before installation. Precautions are given to protect the equipment from damage and optimize performance. The manual also details the functions of the front and rear panels, IR remote control, basic operation including live viewing, playback, search and settings menu, as well as software applications for remote monitoring and configuration.
Taxi led display installation manual(e10 and h1)Max Dan
Tips:
Check the all AC power connections are properly before turn on the power.
l Turn off the power, including LED Board, Terminal Computer, System Box and
Monitor before doing any maintenance.
l Do not touch the power supply when the power is on.
The document summarizes the specifications of the AOP-8070 fanless operator panel PC. It has a 520MHz Marvell PXA270 processor, 128MB RAM, 7" 16:9 WQVGA LCD display, Ethernet and serial port connectivity. It supports Windows CE 6.0 and has CompactFlash storage. Measuring 8.9" x 6.1" x 1.97", it is designed for panel mounting and operates from 10-24V DC power in temperatures from 0-50°C.
This document provides instructions for operating and configuring the GU320B generator controller. It includes:
1. An overview of the controller's display, control keys, and connection ports.
2. Instructions for setting the controller's operation mode (auto, manual, test) and controlling generator start up and shut down.
3. Details on measuring parameters, alarms, communication functions, and technical specifications.
This document provides warnings, cautions, and instructions for the F7 Drive user manual. It warns that the drive should only be installed and operated by qualified personnel according to the manual and codes. It also cautions against modifying the product. The intended use section explains the drive is for industrial applications and must meet certain EU directives if used in Europe.
1) This document is the operation manual for the SHARP Projector model XV-Z20000/DT-5000.
2) It provides important safety warnings and instructions on setting up, connecting, and operating the projector.
3) The manual covers basic operation instructions including turning the projector on/off, selecting inputs, adjusting the image size, and contains troubleshooting information.
The user manual provides step-by-step instructions for installing and configuring the AKCP Door Control Unit (DCU) and its access control components. It describes the DCU hardware, how to wire the DCU to card readers, fingerprint readers, exit buttons, and door locks. It also provides diagrams of typical installations and specifications for cable runs. The manual is intended to guide users through setup and common configurations.
The document provides an owner's manual for LCD colour televisions models DU-30LZ30, DU-37LZ30, and DU-42LZ30. It contains important safety instructions, instructions for installation and connections to external devices, instructions for programming the remote control, and specifications for the televisions. The manual should be read carefully before operating the television and retained for future reference.
A monitor displays the computer's visual output and contains delicate electronics. It should only be cleaned using approved methods and repaired by experts to avoid electric shock. A graphics adapter processes and sends video signals from the computer to the monitor. Common issues include outdated or corrupted drivers, incompatibility between components, loose connections, and overheating. Addressing these issues requires careful inspection and potentially updating or replacing components.
Similar to Hp 2500 CP Quick Reference Service Manual (20)
2. Warranty WARNING
E Copyright Hewlett- The information contained in The procedures described in
Packard Company 1997 this document is subject to this manual are to be
change without notice. performed by HP-qualified
This document contains service personnel only.
proprietary information that is Hewlett-Packard makes no
protected by copyright. All warranty of any kind with Electrical Shock Hazard
rights are reserved. No part of regard to this material,
this document may be including, but not limited to, Serious shock hazard leading
photocopied, reproduced, or the implied warranties of to death or injury may result if
translated into another merchantability and fitness you do not take the following
language without the prior for a particular purpose. precautions:
written consent of Hewlett-
Packard Company. Hewlett-Packard shall not be D Ensure that the ac power
liable for errors contained outlet (mains) has a
herein or for incidental or protective earth (ground)
First edition, November 1997 consequential damages in terminal.
connection with the furnishing,
performance, or use of this D Disconnect the Printer from
material. the power source prior to
performing any
maintenance.
D Prevent water or other
liquids from running onto
electrical components or
circuits, or through openings
in the enclosure.
Product Support, Barcelona Division
Hewlett-Packard Española, S.A.
Avda. Graells, 501
08190 Sant Cugat del Vallès
Spain
3. Troubleshooting
Which Firmware relates to which Ink system?
A.01.XX Ć This firmware revision means that the Printer can only use Imaging Inks.
A.02.XX Ć This firmware revision means that the Printer can use both the Imaging Inks and
the new UV Durable Inks.
Use the Latest Firmware / PostScript Revision
Always check which firmware revision the printer is using (Utilities / Statistics / Code Rev)
and if necessary, update it. Also check the PostScript revision (Utilities / Statistics / PostScript
Rev) and if necessary, update it.
Install the Firmware SIMM and PostScript SIMM in the correct slots
Remember that the Firmware SIMM (including the firmware code for the imaging and UV
Durable Inks) must installed in the first slot from the left. The PostScript SIMM must be
installed in the second slot from the left.
Perform a Service Test on the Failed Component/Assembly
Always perform a Service Test on the component/assembly that you are about to replace, just
to make sure that is the component/assembly that has failed. If the test on that
component/assembly passes, do NOT replace it.
Solving Image Quality Problems
Whenever an Image Quality problem appears, print the Image Quality Print to help diagnose the
problem. The Image Quality Print will help you differentiate between possible IDS / Printer /
media errors and other problems such as incorrect frontĆpanel selection, driver or RIP
configuration or mechanical problems. For information on solving Image Quality problems '
Users Guide.
Line Sensor has Problems Detecting Media
Clean the driveĆroller. Replace the lens cover ' Users Guide, Chapter 10 (Lens Maintenance).
Perform the Line Sensor calibration. Reinstall or, if necessary, replace the Line Sensor.
Carriage is Noisy
Clean and apply lubricant to the Carriage slider rods. Perform Carriage Axis Test.
Service Station is Noisy
Clean and apply lubricant to the Service Station slider rod. Perform Service Station Test.
Printer continuously rejects Printheads
Clean Printhead and Carriage flex contacts. Remove all Printheads from the Carriage and try
installing just the rejected Printhead. If the Printhead is still rejected then replace the
Printhead with a new one. If the new Printhead is not rejected then check, one by one, if the
other Printheads are also rejected. Perform the Printhead Continuity Test. Perform the
Electronics Test. Replace the Trailing Cable. Replace the Carriage Assembly.
Bail Assembly does not lower all the way
Check that there are no obstructions in the way of the Bail Assembly. Perform the Bail Test.
Cover Sensors aren't Working
Check if the faulty sensor is installed correctly. Check if the cable for the faulty sensor is
connected correctly. Replace the faulty Sensor.
HP DesignJet 2500CP and 2000CP Printers Quick Reference Service Manual 1
4. Media continuously crashes
Check if the media loaded is HP approved. If the media is not HP approved, advise the
customer to use HP media and check to see if the problem is now solved. Perform the Refill
Calibration and try to load the media again. Replace the Overdrive Assembly. Remove the
Drive Roller and install in the correct position.
Switch Power Off / Check Printhead Path" message appears when the Printer is
about to cut or is cutting?
Check the media path and clear it if necessary. Perform the Cutter Test. Replace the Cutter
Assembly. Replace the Overdrive Assembly.
Lens Maintenance" message appears on the FrontĆPanel?
The lens cover, which is installed on the line sensor, is dirty. Clean the Mark Encoder on the
Driver Roller. Replace the lens cover ' Users Guide, Chapter 10 (Lens Maintenance).
Printer does not Power ON
Check that the power cord is connected correctly. Check that the Flash SIMM is installed
correctly in the correct slot (the first slot from the left) at the back of the Printer. Try to
disconnect all the cables, apart from the Front Panel Cable, from the Electronics Module and
then try to power ON the Printer again. If nothing appears on the frontĆpanel display, then
replace the Electronics Module. If the Printer does Power On with the cables disconnected,
then the problem must be with another component of the Printer. To find the faulty
component, power OFF the Printer and connect one of the cables and power ON again. Once
the faulty component is connected, it will not allow the Printer to power ON. This component
should then be replaced.
Printer has problems with Media Loading
Check that the Media Sensor is installed correctly. Check if the cable for the Media Sensor is
connected correctly. Check if the Pincharms are down (the Pincharm lever should be up).
Make sure Line Sensor is installed correctly. If necessary, replace Line Sensor. Replace Media
Sensor. Perform Electronics Test.
System Error Codes
WARNING: Only replace one component at a time and check if the error has gone
before replacing another component. Using this procedure you will be
able to determine exactly which component failed.
System Error: 0000D8 Ć Refer to System Error Code 07xxxx.
System Error: 010020 Ć Reseat/replace Flash SIMM. Replace Electronics Module.
System Error: 010021 AXXXXXXX
NOTE: Printer will not function without any RAM SIMMs installed. Install a
minimum of 4MB memory module.
D If Error Data is higher than A4000000, check RAM SIMMs are original HP supported
parts. If more than one RAM SIMM is installed, remove one of them and power on the
printer again. If system error reappears, reinstall the removed RAM SIMM and remove the
other RAM SIMM and then power on the printer again. If system error reappears then try
replacing both RAM SIMMs with new ones.
D If Error Data is lower than A4000000, replace Electronics Module.
2 Quick Reference Service Manual HP DesignJet 2500CP and 2000CP Printers
5. System Error: 010022 Ć Replace Electronics Module.
System Error: 010023 Ć Check XĆencoder and optical sensors (media, pinchĆwheel, refill,
elevator, primer and service station) cable path for damage. Replace Electronics Module.
System Error: 010025 Ć Replace Electronics Module.
System Error: 010030 Ć Check Refill/Service Station Interconnect Cables. Replace
Refill Interconnect PCA. Replace Service Station Assembly. Replace Electronics Module.
System Error: 010031 Ć Check/replace Trailing Cable. Perform Carriage Calibration.
Replace Carriage Assembly. Replace Electronics Module.
System Error: 010032 000000XX
Error data (XX):
1 ³ Electronics Module fan failed.
2 ³ Service station fan failed.
3 ³ Both fans failed.
10 ³ Electronics Module fan is shortĆcircuited.
20 ³ Service Station fan is shortĆcircuited.
30 ³ Both fans are shortĆcircuited.
12 ³ Service Station fan is not running and the Electronics Module fan is shortĆcircuited.
21 ³ Electronics Module fan is not running and the Service Station fan is shortĆcircuited.
Try the following: Check the Service Station fan is connected correctly. If both fans fail,
replace Electronics Module. If Service Station fan is faulty, check Service Station
Interconnect Cable. Replace Service Station Assembly. Replace Electronics Module.
System Error: 010033 Ć Replace Electronics Module.
System Error: 010034 000X0000
Error data:
00010000 ³ XĆaxis Motor Failed.
00020000 ³ YĆaxis Motor Failed.
00030000 ³ Both DC Motors Failed.
Try the following:
D Check that both DC Motors are connected correctly.
D If Faulty YĆaxis motor:
S Check Refill Interconnect Cable. Replace Refill Interconnect PCA. Replace YĆaxis
Motor Assembly.
D If Faulty XĆaxis Motor Ć Replace XĆaxis Motor Assembly .
D If both DC Motors fail, replace Electronics Module.
HP DesignJet 2500CP and 2000CP Printers Quick Reference Service Manual 3
6. System Error: 010035 0XABCDEF
Error data (0XABCDEF):
If the value of each letter is 0, then the component is OK. If the value of each letter is 1 then
the component has failed.
X ³ Electronics signal failed (ignore other values).
A ³ Elevator Stepper Motor Failed.
B ³ Refill Stepper Motor Failed.
C ³ Primer Stepper Motor Failed.
D ³ Service station (ZĆaxis) Stepper Motor Failed.
E ³ Service station (XĆaxis) Stepper Motor Failed.
F ³ Bail Stepper Motor Failed.
Try the following:
D If X = 1 then replace the Electronics Module.
D Check the Interconnect Cables.
D Check the failed Stepper Motor is connected correctly.
D If Bail, Elevator or the Refill Stepper Motors are faulty, then:
S Replace Refill interconnect cable. Replace Refill interconnect PCA.
D If Faulty Primer or Service Station Stepper Motors Ć Replace Service Station
Interconnect cable.
D If Faulty Elevator Stepper Motor Ć Replace Elevator Assembly.
D If Faulty Refill Stepper Motor Ć Replace Refill Assembly.
D If Faulty Primer Stepper Motor Ć Replace Primer Assembly.
D If Faulty Service Station Stepper Motors Ć Replace Service Station Assembly.
D If Faulty Bail Stepper Motor Ć Replace Bail Stepper Motor Assembly.
D Replace Electronics Module.
System Error: 010036 - Switch the Printer OFF from the back and then disconnect the
Trailing Cable from the Electronics Module. Switch the Printer ON and see if the Error Code
now changes to 010037". If the error code remains as 010036", replace the Electronics
Module. If the Error Code changes to 010037" then refer to that error code.
System Error: 010036 00000800 - Problem with the YĆaxis or ANY Stepper Motor.
System Error: 010036 00001000 - Problem with the XĆaxis or ANY Stepper Motor.
System Error: 010037 Ć Check/replace Trailing Cable. Replace Carriage Assembly.
Replace Electronics Module.
System Error: 010038 Ć Refer to error code 010037".
System Error: 010039 Ć Check/replace Trailing Cable. Replace Carriage Assembly.
System Error: 010040 Ć
Refer to error code 010037".
4 Quick Reference Service Manual HP DesignJet 2500CP and 2000CP Printers
7. System Error: 010041 Ć Switch the Printer OFF and ON again. During initialization
another error code will appear. Refer to the relevant error code for further information.
System Error: 010042 0000000X
Error data (X):
0 ³ Faulty Media Sensor.
1 ³ Faulty PinchĆarm Sensor.
2 ³ Faulty Refill Assembly Sensor.
3 ³ Faulty Elevator Sensor.
4 ³ Faulty Service Station Sensor.
5 ³ Faulty Primer Sensor.
Try the following:
D Make sure that all sensors are connected correctly.
D If Faulty Service Station or Primer sensors Ć Check/replace Service Station Interconnect
Cable.
D If Faulty Refill Assembly or Elevator sensors Ć Check/replace Refill Interconnect Cable.
D If Faulty PinchĆarm sensor Ć Replace PinchĆarm Sensor.
D If Faulty Refill Assembly Sensor Ć Replace Refill Assembly.
D If Faulty Elevator Sensor Ć Replace the Elevator Assembly.
D If Faulty Service Station Sensor Ć Replace the Service Station Assembly.
D If Faulty Media Sensor Ć Replace Media Sensor.
D If Faulty Primer Sensor Ć Replace Primer Assembly.
D Replace Electronics Module.
System Error: 010100 Ć Replace Electronics Module.
System Error: 010101 Ć Refer to Error Code 07xxxx
System Error: 010102 Ć Replace Electronics Module.
System Error: 010110 Ć Test Electronics Module. Perform the following Calibrations:
Carriage / Refill / Line Sensor / Service Station / Printhead Alignment / Color Calibration /
Service Accuracy. Make sure you have the latest version of the Flash SIMM (firmware)
installed. Replace Electronics Module.
System Error: 010111 Ć Press ENTER and reĆconfigure the front panel settings. If
possible, enter Service Mode and clear the EEROM. If error code continues, replace
Electronics Module.
System Error: 010120 Ć If Error Code appeared during normal operation and not during
initialization, then problem can be solved by switching the printer OFF and ON again. Enter
in Service Mode. During initialization Error Code 010110" appears. Refer to that error code
for further information.
System Error: 010121 Ć Switch the printer OFF and ON again. If Error Code reappears,
replace Electronics Module.
HP DesignJet 2500CP and 2000CP Printers Quick Reference Service Manual 5
8. System Error: 020000 Ć Check the Service Station Interconnect Cable. Check cables for
the Primer Stepper Motor and Sensor. Check that the air tubes that are connected between
the primer assembly and the service station are in the correct position and are not squeezed
together. Check that the Primer Stepper Motor is NOT shorted. Replace Service Station
interconnect cable. Replace Primer Assembly. Replace Service Station Assembly. Replace
Electronics Module.
System Error: 020001 Ć Check if the ink cartridges are installed correctly on the
Elevator and that there are no obstacles in the way. Check/replace the Refill Interconnect
Cable. Check cables for the Elevator Stepper Motor and Sensor. Check that the Elevator
Stepper Motor is NOT shorted. Replace Refill Interconnect PCA. Replace Elevator Assembly.
Replace Electronics Module.
System Error: 020002 Ć Check/replace Refill Interconnect Cable. Check Refill Stepper
Motor and Sensor cables. Check that the Refill stepper motor is NOT shorted. Replace Refill
Interconnect PCA. Replace Refill Assembly. Replace Electronics Module.
System Error: 020003 Ć Perform the Refill Calibration. Check for obstacles in the Refill
path. Check/replace Refill Interconnect Cable. Check the cables for the Refill Stepper Motor
and Sensor. Check that the Refill stepper motor is NOT shorted. Replace Refill Interconnect
PCA. Replace Refill Assembly. Replace Electronics Module.
System Error: 020004 Ć Perform the Service Station Calibration. Check that the Service
Station flag is installed correctly. Check that the Service Station nut is installed correctly. The
nut is located on the front side of the Service Station, just below the Printhead Cleaner
holder. Check/replace the Service Station Interconnect Cable. Check cables for the Service
Station components. Check that the Service Station stepper motors are NOT shorted.
Replace Service Station Assembly. Replace Electronics Module.
System Error: 020005 Ć Check if the ink cartridges are installed correctly on the
Elevator and that there are no obstacles in the way. Check/replace Refill Interconnect Cable.
Check cables for the Elevator Stepper Motor and Sensor. Check that the Elevator stepper
motor is NOT shorted. Replace Refill Interconnect PCA. Replace Elevator Assembly. Replace
Electronics Module.
System Error: 020006 Ć Perform Refill Calibration.
System Error: 020010 Ć Switch the printer OFF and ON again and check if the error
code disappears. If the error code disappears, do NOT try to troubleshoot any further.
Check that the Encoder Strip is NOT damaged or dirty. If necessary, clean the encoder strip,
or if damaged, replace the Encoder Strip. Clean and lubricate the slider rods. Replace YĆaxis
Motor Assembly. Replace Tensioner Holder Assembly (with spring). Replace YĆaxis belt.
Replace Carriage Assembly.
System Error: 020011 Ć Refer to Error Code 020010.
6 Quick Reference Service Manual HP DesignJet 2500CP and 2000CP Printers
9. System Error: 040xxx Ć Press ENTER and switch the printer OFF Make sure the MIO
.
card is installed correctly and switch the printer ON again. If this error code continues to
appear then replace the MIO Card. If the system error continues to appear after replacing the
MIO card, replace Electronics Module.
System Error: 040601 Ć Install latest version of the MIO Card.
System Error: 050000 Ć Clean Mark Encoder. Check Line Sensor is installed/connected
correctly. Perform Service Accuracy Calibration. Replace lens cover which is installed on the
line sensor. Replace Line Sensor Assembly. Replace Trailing Cable. Replace Carriage
Assembly. Replace Electronics Module.
System Error: 060000 Ć Close the Window if it is open. Move the printer to a location
with less light. The Printer MUST be kept away from direct intense sunlight or a spotlight.
Replace the Line Sensor Assembly. Replace the Trailing Cable. Replace the Carriage
Assembly. Replace the Electronics Module.
System Error: 060100 Ć Calibrate Line Sensor. Clear EEROM and perform all
calibrations again. Replace Electronics Module and perform all calibrations
System Error: 060200 Ć Incompatible Firmware and Carriage PCA. Upgrade Firmware.
System Error: 060300 Ć Incompatible Firmware and Line Sensor. Upgrade Firmware.
System Error: 060400 Ć Incompatible Carriage PCA and Line Sensor. Replace Line
Sensor. Calibrate Line Sensor.
System Error: 060500 Ć Calibrate Line Sensor.
System Error: 07xxxx Ć Firmware Error. Make sure you have the latest version of the
Flash SIMM (firmware) installed or upgrade the firmware revision of the Flash SIMM. If the
error code remains after installing the latest Flash SIMM then report the error to the HP
Response Center or the nearest HP Support Office, stating the following information:
D Model and Serial Number of the printer.
D the complete error number.
D service print (Utilities / Service Tests).
D plot file where the error has occurred.
D additional comments about the usage, the setting, etc..
HP DesignJet 2500CP only
System Error: 08xxxx - PostScript Error. Refer to Error Code 07xxxx
System Error: 080001 - Hard Disk Drive installed without PostScript.
HP DesignJet 2500CP and 2000CP Printers Quick Reference Service Manual 7
10. HP DesignJet 2500CP only
System Error: 09xxxx Ć Hard Disk Drive Error. Switch the printer OFF and ON again. If
Error Code reappears, check that the Hard Disk data cable is correctly connected at both
ends. Also check that the Hard Disk Power Cable is correctly connected. Replace Hard Disk
data cable. If Error Code continues to appear, replace Hard Disk.
System Error: 090004 - PostScript installed without Hard Disk Drive.
Service Tests
Entering the Service Tests (Diagnostics) Menu System
1 Hold the UP and ENTER keys down and switch printer ON from the power switch on
the back of the printer. Wait until Status/Initializing" is displayed before releasing keys.
2 Once Status/Ready" is displayed, scroll to Utilities / Service Tests / Diagnostics and press
Enter button. Use Arrow buttons to scroll through test selections and press Enter
button to begin a specific test.
WARNING: Only replace one component at a time and check if the error has gone
before replacing another component. Using this procedure you will be
able to determine exactly which component failed.
D01. Electronics
Purpose Ć Test Electronics Module, Hard Disk, Line Sensor (only presence), Trailing Cable
and Carriage Assembly (does not test the MIO Card).
If D0100 OK" Ć Test Passed.
If D0101 Fail", D0102 Fail" or D0103 Fail" Ć Replace Electronics Module.
If D0104 Fail" Ć Check Hard Disk Power Cable is correctly connected. Replace Hard Disk
data cable. If Error Code continues, replace Hard Disk.
If D0105 Fail" Ć Check if Line Sensor is installed/connected correctly. Check/replace
Trailing Cable. Replace Carriage Assembly.
If D0106 Fail" Ć Remove Printheads and clean flex contacts on Carriage Assembly and
Printheads. Reseat Printheads and try test again. Perform the Printhead Continuity test.
Replace the complete Ink Delivery System of each color one by one, performing this test each
time. Check/replace Trailing Cable. Replace Carriage Assembly.
D02. Line Sensor
Purpose Ć Test the Line Sensor.
REPLACE THE LENS COVER BEFORE YOU PERFORM THIS TEST IN
ORDER TO PREVENT ANY AEROSOL PROBLEMS.
If Green OK V: ##.## / Blue OK V: ##.##" Ć Test Passed.
If Green Fail V: ##.## / Blue Fail V: ##.##" Ć Replace the lens cover on the Line
Sensor. Make sure that the Mark Encoder on the Driver Roller is clean. Perform the
Electronics test. Check if the Media used is suitable for the printer. Check if the Line Sensor
is installed/connected correctly. Replace Line Sensor.
8 Quick Reference Service Manual HP DesignJet 2500CP and 2000CP Printers
11. D03. Carriage Axis (YĆaxis)
Purpose Ć Test components of the Carriage Axis.
If D0300 OK" Ć Test Passed.
If D0301 Fail", D0302 Fail" or D0303 Fail" Ć Apply lubricant to the slider rods. Replace
Encoder Strip. Replace YĆaxis Motor Assembly.
If D0304 Fail" Ć Replace encoder strip.
D04. Media Axis (XĆaxis)
Purpose Ć Test the components of the Media Axis.
If D0400 OK" Ć Test Passed.
If D0401 Fail", D0402 Fail" or D0403 Fail" Ć Replace the XĆaxis Assembly.
If D0404 Fail" Ć Clean Mark Encoder. Check Line Sensor is installed correctly. Perform
Service Accuracy Calibration. Replace lens cover installed on line sensor. Replace Line Sensor
Assembly. Replace Trailing Cable. Replace Carriage Assembly. Replace Electronics Module.
D05. Service Station
Purpose Ć Test the Service Station, including Primer Assembly.
If D0500 OK" Ć Test Passed.
If D0501 Fail" Ć Replace the Primer Assembly.
If D0502 Fail" Ć Check if Service Station flag is installed correctly. Check Service Station
interconnect cable. Replace Service Station Assembly.
D06. Refill
Purpose Ć Test Refill Assembly and Elevator Assembly.
If D0600 OK" Ć Test Passed.
If D0601 Fail" Ć Check Refill interconnect cable. Replace Refill Assembly.
If D0602 Fail" Ć Replace Elevator Assembly.
D07. Front Panel
PurposeĆ Test the frontĆpanel keys.
If required key is not pressed within 10 seconds, D0701 Fail" is displayed.
If all the keys are pressed and the test passes, D0700 OK" is displayed.
If any of the keys are pressed but not recognized then D0701 Fail" is displayed after 10
seconds Ć Check that the Front Panel Assembly cable is connected to the Electronics Module.
Replace Front Panel Assembly.
HP DesignJet 2500CP and 2000CP Printers Quick Reference Service Manual 9
12. D08. Sensors
Purpose Ć Test Window, Right and Left Door, Refill Valve, Standby Button, Media and
Pincharm Sensors.
If D0800 OK" Ć Test Passed.
If D0801 Fail" Ć Check that the Window Sensor is seated correctly. Check/replace Window
Sensor cable.
If D0802 Fail" Ć Check that the Right Door Sensor is seated correctly. Check/replace the
Right Door Sensor.
If D0803 Fail" Ć Check that the Left Door Sensor is seated correctly. Check/replace the Left
Door Sensor.
If D0804 Fail", D0805 Fail", D0806 Fail" or D0807 Fail" Ć Check the Refill Valve
Sensor cable. Check the Refill interconnect cable. Replace the Refill Assembly.
If D0808 Fail" Ć Check Standby Button Sensor cable. Replace Standby Button Assembly.
If D0809 Fail" Ć Check Media Sensor cable. Replace the Media Sensor Assembly.
If D0810 Fail" Ć Check Pincharm Sensor cable. Replace the Pincharm Sensor Assembly.
D09. MIO Presence
Purpose Ć Test the presence of MIO Card and the communication between MIO Card and
Main PCA.
If D0900 OK" Ć Test Passed.
If D0901 Fail" Ć Reseat/replace MIO card.
D10. Cutter
Purpose Ć Test Cutter Assembly.
If carriage picks up the Cutter Assembly and runs it along the length of the printer twice,
test has passed.
If the carriage does not pick up the Cutter Assembly, test has failed Ć Check if the Cutter
has been disabled through the frontĆpanel (Device Setup / Cutter). Perform Carriage test.
Replace Cutter Assembly.
D11. Bail
Purpose Ć Test the Bail Assembly.
If Bail Assembly is raised, test has passed.
If Bail Assembly is NOT raised, test has failed Ć Replace Bail stepper motor. Replace Bail
assembly.
10 Quick Reference Service Manual HP DesignJet 2500CP and 2000CP Printers
13. D12. Image Quality
Purpose Ć Test the image quality attributes of the printer.
If after aligning the Printheads, Bad Printhead Alignment" is displayed Ć Try recovering the
printheads using the frontĆpanel menu. Check the alignment pattern to check if any of the
colors are printed badly. If a color is printing badly then replace the complete Ink Delivery
System of the color that is bad. Perform the Line Sensor calibration. Replace the lens cover '
Users Guide, Chapter 10 (Lens Maintenance). Check if the Line Sensor is installed/connected
correctly. Perform the Line Sensor Test. Perform the Electronics Test.
If the values of the Printheads are between -1.0 and +1.0 for any of the Printheads then
the test has passed.
If the values of the Printheads are NOT between -1.0 and +1.0 for any of the Printheads
then the test has failed Ć Perform the Printhead Alignment Calibration. Perform the Line
Sensor calibration. Replace the lens cover ' Users Guide, Chapter 10 (Lens Maintenance).
Perform the Electronics test. Check if the Media used is suitable for the printer. Check if the
Line Sensor is installed/connected correctly. Replace the Line Sensor.
D13. Printhead ID
Purpose Ć Check the default settings of the printheads. ID 200000 is for inks for imaging and
ID 220000 is for UV Durable Inks.
This test is for information only which might be requested in the event of an escalation.
D14. Printhead Continuity
Purpose Ć Check the primitives and address maps of the printheads.
The values shown for all Printheads should be 0. If a different value is shown then that
Printhead has a continuity problem. Try the following:
1 DO NOT replace any parts. This will cause extra problems. Remove the
Printheads and clean the flex contacts on the Carriage and the Printheads. Reseat the
Printheads and try the test again.
2 Even if one of the Printheads failed the Printhead Continuity test, you must remove all the
Printheads from the Carriage and try installing them one by one. Before installing each
Printhead, check the continuity of all four Printheads. The frontĆpanel should display a
3ffff / 3fff result for each Printhead that is not inserted and the original values (the value
that was displayed before the Printhead was removed) for the Printheads when they are
inserted. If you get a value that is different than 3ffff / 3fff when the Printheads are
removed then you must perform step 1 again. If you get the same results after repeating
step 1, then the carriage is damaged. Replace the Carriage Assembly. When you insert each
Printhead, the values should change only for that Printhead. If the values of other
Printheads also change, then the problem is the Printhead itself and not the actual Printer.
In this case you must replace the complete Ink Delivery System of the color that failed.
3 If you continue getting the original value (the value that was displayed before the
Printhead was first removed) then you must replace the complete Ink Delivery System of
the color that failed and try the test again.
4 As a last resort, replace Carriage Assembly.
D15. Clean Roller
Purpose Ć To rotate the Drive Roller when it requires cleaning.
HP DesignJet 2500CP and 2000CP Printers Quick Reference Service Manual 11
14. D16. Erase EEROM
Purpose Ć To clear the EEROM.
If D1600 OK" Ć EEROM erased correctly.
If D1601 Fail" Ć Replace Electronics Module.
D17. Reset Counters
Purpose Ć To reset the internal counters.
If D1700 OK" Ć Counters reset correctly.
If D1701 Fail" Ć Replace Electronics Module.
D19. Hard Disk Drive Revision
Purpose Ć To show the revision of the internal Hard Disk Drive.
Calibrations
Entering the Service Calibrations Menu System
1 Hold the UP and ENTER keys down and switch printer ON from the power switch on
the back of the printer. Wait until Status/Initializing" is displayed before releasing keys.
2 Once Status/Ready" is displayed, scroll to Utilities / Service Tests / Calibrations and
press Enter button. Use Arrow buttons to scroll through selections and press Enter
button to begin a specific calibration.
Calibrations To Be Done
When Required C01 C02 C03 C04 C05 C06 C07 C08
Electronics Module is replaced Yes Yes Yes No Yes Yes Yes Yes
Carriage is disassembled or replaced Yes Yes Yes No Yes Yes Yes Yes
Refill Assembly is disassembled or replaced No Yes No No Yes No Yes No
Line Sensor is disassembled or replaced No No Yes No Yes Yes Yes Yes
Service station is disassembled or replaced No No No No No No No No
XĆaxis Assembly is disassembled or replaced No No No No No No No Yes
Drive Roller is disassembled or replaced No No No No No No No Yes
Banding Problem No No Yes No Yes Yes No Yes
Edge Detect Problem No No Yes No No No No No
Misalignment between Colors No No Yes No Yes Yes No Yes
Color Accuracy Problem No No Yes No No No Yes No
Nozzles Out or Misdirected No No No No No Yes No No
12 Quick Reference Service Manual HP DesignJet 2500CP and 2000CP Printers
15. C01. Carriage
Purpose Ć Calibrate the temperature from which the printhead has to be warmed.
THIS CALIBRATION MUST BE DONE WITH THE PRINTHEADS INSTALLED.
If C0100 OK" Ć Calibration done.
If C01xx Fail" Ć Perform Electronics test.
C02. Refill
Purpose Ć To ensure the correct position of the carriage assembly in respect to the refill assembly.
When the Carriage Assembly, Refill Assembly or the Electronics Assembly is ordered, a Refill
Calibration Tool, a special Carriage height gauge and an Instructions flyer will be included.
You must follow the instructions in the flyer in order to correctly calibrate the Refill
Assembly and to make sure that the Carriage is at the correct height.
C03. Line Sensor
Purpose Ć Calibrate the intensity of the line sensor in the carriage PCA.
Load white media before performing this calibration.
WINDOW MUST CLOSED BEFORE YOU PERFORM THIS CALIBRATION.
REPLACE THE LENS COVER BEFORE YOU PERFORM THIS
CALIBRATION IN ORDER TO PREVENT ANY AEROSOL PROBLEMS.
If C0300 Done" Ć Calibration done.
C04. Service Station
THIS CALIBRATION IS NO LONGER VALID AND SHOULD NEVER BE
PERFORMED.
C05. Printheads Alignment
Purpose Ć To test and if necessary correct the misalignment between the printheads.
WINDOW MUST CLOSED BEFORE YOU PERFORM THIS CALIBRATION.
If C0500 Done" Ć Calibration done.
If C0501 Fail" Ć If the calibration pattern is bad, try recovering printheads using the
frontĆpanel menu and try the calibration again. If the calibration pattern is bad again, then
replace the complete Ink Delivery System of the color that is bad. Perform Electronics Test.
Perform Line Sensor Test.
HP DesignJet 2500CP and 2000CP Printers Quick Reference Service Manual 13
16. C06. Printheads Check
Purpose Ć Check that the Nozzles of the Printheads are functioning correctly.
WINDOW MUST CLOSED BEFORE YOU PERFORM THIS CALIBRATION.
If C0600 Done" Ć Calibration done.
If C06xx Fail" Ć If the calibration pattern is bad, try recovering printheads using the
frontĆpanel menu and try the calibration again. If the calibration pattern is bad again, then
replace the complete Ink Delivery System of the color that is bad. If the calibration pattern is
good, replace Line Sensor. Perform Electronics Test. Perform Line Sensor Test.
C07. Color Calib. (Only available in the HP DesignJet 2500CP printer)
Purpose Ć To determine the correction function to be applied in PostScript in order to match
the color reproduction of a nominal Printer. This Calibration is necessary to improve color
consistency between different prints and different Printers.
WINDOW MUST CLOSED BEFORE YOU PERFORM THIS CALIBRATION.
If C0700 Done" Ć Calibration done.
If C0701 Fail" Ć If the calibration pattern is bad, try recovering printheads using the
frontĆpanel menu and try the calibration again. If the calibration pattern is bad again, then
replace the complete Ink Delivery System of the color that is bad. Perform Electronics Test.
Perform Line Sensor Test.
C08. Service Accuracy
Purpose Ć Calibrate the nominal advance of the media.
WINDOW MUST CLOSED BEFORE YOU PERFORM THIS CALIBRATION.
You must use HP Matte film to perform this calibration even if it is not
supported. You can select it as any media in the frontĆpanel.
If C0800 Done" Ć Calibration done.
If C0801 Fail" Ć If the calibration pattern is bad, try recovering printheads using the
frontĆpanel menu and try the calibration again. If the calibration pattern is bad again, then
replace the complete Ink Delivery System of the color that is bad. If the calibration pattern is
good, replace Line Sensor. Perform Electronics Test. Perform Line Sensor Test.
14 Quick Reference Service Manual HP DesignJet 2500CP and 2000CP Printers
17. C09. Maintenance
Purpose Ć To read and, if necessary, adjust the preventive maintenance counter, which counts
the number of swaths.
This Calibration must be used to reset the Maintenance counter to ZERO
after the Preventive Maintenance Kit has been installed in order to disable
the Maintenance Advised" message on the frontĆpanel.
Note down the Swaths Counter (####) before replacing the Electronics Module.
Adjust the Swaths Counter (####) after replacing the Electronics Module.
Use the following keys to adjust the swaths counter.
D Up Arrow Ć Increase the Counter Digit.
D Down Arrow Ć Decrease the Counter Digit.
D Enter Ć Select the Next digit.
C10. Font Type Set (Only available in HP DesignJet 2500CP printer)
Purpose Ć To check and, if necessary, select a Font type (only possible when the printer
detects that a new Hard Disk has been installed).
YOU MUST PERFORM THIS CALIBRATION WHEN YOU INSTALL A NEW
ELECTRONICS MODULE IN ORDER TO SET THE CORRECT FONT TYPE.
If you have not installed a new Electronics Module, current font type will be displayed.
If you have installed a new Electronics Module, Character Set New" will be displayed. Press
Up Arrow key to set new type font.
The message Choose Character Set" will be displayed on the frontĆpanel. Use Up and
Down Arrow keys to select font type required and then press Enter.
The first time a PostScript print is sent to the printer, the other font types will be deleted
and cannot be recovered.
IF YOU DO NOT SELECT ANY FONT SET, THE ROMAN FONT WILL BE
SELECTED BY DEFAULT WHEN A POSTSCRIPT FILE IS SENT.
HP DesignJet 2500CP and 2000CP Printers Quick Reference Service Manual 15