This document provides steps to set up a broadcast campaign in Vicidial: 1. Create a new campaign with Allow No-Hopper-Leads Logins set to Y, Minimum Hopper Level set to the desired level (e.g. 100), and Dial Method Ratio selected. 2. Create users from 2000 to the number corresponding to the maximum simultaneous calls (e.g. 2000-2009 for 10 simultaneous calls). 3. Create remote agents with user IDs starting at 2000, number of lines corresponding to simultaneous calls, and external extension set (e.g. 7777). 4. Convert audio files to wav format and upload them along with adding a dialplan to extensions

1. STEP 1
Login to your vicidial admin page
http://yourserverip/vicidial/admin.php
Create a New Campaign with
Allow No-Hopper-Leads Logins: Y
Minimum Hopper Level Y
Dial Method Ratio
Next Agent Call Random
How to setup Broadcast Campaign
Select your
Campaign and
click modify
Set Min Hopper
level = 100
Dial Method =
ratio
STEP 2
Create users
User Level 4
Password 1234
User Number 2000
Full Name 2000
Note: Based on simultaneous calls create as many users in series like 2000, 2001 ,
2002, 2003
For eg: for 10 simultaneous calls , create user from 2000 to 2009
for 20 ------------------------------------------------ 2000 to 2019
User no
: 2000
Password
: 1234
Level : 4
Step 3
Create Remote Agents
Add New Remote Agents:
User ID Start 2000
Number of Lines 1
External Extension 7777
Status Active
Campaign VoiceBroadcast Campaign
Note : Number Of Lines = > put 2 for 2 simulataneous calls, 10 for 10simultaneous calls
No need to create 10 remote agents if you put no of lines = 10
Make sure you have created Users from 2000 to 2009 ie: 10 users
User ID : 2000
No of lines 1
External Extension
7777
Step 4
Audio file and Dialplan
Convert your audio file to 16bit Mono 8k PCM WAV audio files(.wav)
Using NCH Wavepad or easeaudio converter.
Upload the conveter file to /var/lib/asterisk/sounds directory
Or upload using vicidial Audio store.
Enter the below dialplan in extensions.conf under default context
(vi /etc/asterisk/extensions.conf )
exten => 7777,1,Answer()
exten => 7777,2,Playback(yourvoicefilename)
exten => 7777,3,Hangup
Reload the asterisk
asterisk –rx “reload”
Final Step
• Upload Leads in List
• Configure the Carrier
• Set Campaign with Proper dialprefix as per your dialplan
• Activate the Campaign
• Check the Realtime Screen for the dialstatus of campaign