How To make Snowberry Earrings DIY Jewerly Making TutorialHouseofGems.com
Learn how to make these adorable snow berry like earrings. Perfect to wear out during this winter season. It just takes a few easy steps and your earrings will be ready to wear.
How to Make a Calming Twisted Pendant DIY Jewelry Making TutorialHouseofGems.com
How to Make a beautiful calming twisted pendant with very little jewelry supplies! You don't need to buy a bunch of gold and silver to hand make your own lovely jewelry.
How To make Snowberry Earrings DIY Jewerly Making TutorialHouseofGems.com
Learn how to make these adorable snow berry like earrings. Perfect to wear out during this winter season. It just takes a few easy steps and your earrings will be ready to wear.
How to Make a Calming Twisted Pendant DIY Jewelry Making TutorialHouseofGems.com
How to Make a beautiful calming twisted pendant with very little jewelry supplies! You don't need to buy a bunch of gold and silver to hand make your own lovely jewelry.
Rustic Romance Heart Pendant Wire Jewelry TutorialHouseofGems.com
This whimsical heart shaped pendant is made with two gauges of wire, and a single pink quartz bead. You only need basic wire wrapping skills to complete this lovely project! Kasia used antiqued copper wire to give the swirly necklace a rustic look.
How to Make Pearl Nest Pendant DIY Jewelry Making TutorialHouseofGems.com
Ready for another tutorial? Well we got a brand new one for you! Learn to make this stunning Pearl Nest Pendant to make the perfect necklace to impress anyone!
How to Make Beaded Pearl Earrings DIY Jewelry Making TutorialHouseofGems.com
Learn how to make this simple and beautiful pair of Pearl Earrings in only 5 easy steps!!! All you need are some copper wire, some pearl beads and a pair of earwires!!!
Materials:
30 cm (11.8’’) of 20 gauge wire (of 0.8 mm in diameter) cut into 2 even pieces
2 glass drops - 6 mm x 9 mm
2 brass beads - 5 mm
2 copper beads - 4 mm
2 copper beads - 3 mm
2 copper beads - 2 mm
Tools:
Round nose pliers
Wire cutters
Step 1: String in bead
Step 2: Make a loop in the middle of wire
Step 3: Fold wire upwards to create a loop
Step 4: Fold the other side of the wire and create same upward loop
Step 5: Lastly create the third loop in the same upward direction
Step 6: Place two metal beads on both wires
Step 7: Place the rest of the beads on wires
Step 8: Bend the wire and trim to create final loop
Step 9: Add ear wires. Your earrings are finished.
How to Make a Cherry Blossom Pendant DIY Jewelry Making TutorialHouseofGems.com
How to Make a Cherry Blossom Pendant:
Materials:
10" of 20 gauge wire
40" of 26 gauge wire
Assorted beads of different colors
Tools:
Wire Cutters
Curved Tip Round Nose Pliers
Step 1:
Create your initial circle shape with your 20 gauge wire. You can use your hands to ensure it is exactly how you want it. Create a loop on the top with your curved tip round nose pliers.
Step 2:
Wrap your 20 gauge wire around the base of your loop about 10 times to ensure a tight hold. You will be sliding your beads onto this wire.
Step 3:
Wrap a new wire and insert your beads onto this one and slide them all the way down. Twist the wire around in a clockwise manner using your fingers. Trim off excess.
Step 4:
Slide on three more beads to a new wire and do the same technique with these. Grip the beads and twist the wire using your thumb and index finger. Trim off your excess wire so that it looks as if there is a branch hanging off.
Step 5:
Wrap your wire around your base about 7 times and then string on three more beads. Twist these beads as well and trim off your excess wire.
Step 6:
Repeat wrapping your wire around the base and adding the beads for however many branches that you desire. You can use one, two, or even three beads for each branch.
Step 7:
Slide your chain through the loop on top of your newly made Cherry Blossom Pendant and you now have a stunning necklace.
Rustic Romance Heart Pendant Wire Jewelry TutorialHouseofGems.com
This whimsical heart shaped pendant is made with two gauges of wire, and a single pink quartz bead. You only need basic wire wrapping skills to complete this lovely project! Kasia used antiqued copper wire to give the swirly necklace a rustic look.
How to Make Pearl Nest Pendant DIY Jewelry Making TutorialHouseofGems.com
Ready for another tutorial? Well we got a brand new one for you! Learn to make this stunning Pearl Nest Pendant to make the perfect necklace to impress anyone!
How to Make Beaded Pearl Earrings DIY Jewelry Making TutorialHouseofGems.com
Learn how to make this simple and beautiful pair of Pearl Earrings in only 5 easy steps!!! All you need are some copper wire, some pearl beads and a pair of earwires!!!
Materials:
30 cm (11.8’’) of 20 gauge wire (of 0.8 mm in diameter) cut into 2 even pieces
2 glass drops - 6 mm x 9 mm
2 brass beads - 5 mm
2 copper beads - 4 mm
2 copper beads - 3 mm
2 copper beads - 2 mm
Tools:
Round nose pliers
Wire cutters
Step 1: String in bead
Step 2: Make a loop in the middle of wire
Step 3: Fold wire upwards to create a loop
Step 4: Fold the other side of the wire and create same upward loop
Step 5: Lastly create the third loop in the same upward direction
Step 6: Place two metal beads on both wires
Step 7: Place the rest of the beads on wires
Step 8: Bend the wire and trim to create final loop
Step 9: Add ear wires. Your earrings are finished.
How to Make a Cherry Blossom Pendant DIY Jewelry Making TutorialHouseofGems.com
How to Make a Cherry Blossom Pendant:
Materials:
10" of 20 gauge wire
40" of 26 gauge wire
Assorted beads of different colors
Tools:
Wire Cutters
Curved Tip Round Nose Pliers
Step 1:
Create your initial circle shape with your 20 gauge wire. You can use your hands to ensure it is exactly how you want it. Create a loop on the top with your curved tip round nose pliers.
Step 2:
Wrap your 20 gauge wire around the base of your loop about 10 times to ensure a tight hold. You will be sliding your beads onto this wire.
Step 3:
Wrap a new wire and insert your beads onto this one and slide them all the way down. Twist the wire around in a clockwise manner using your fingers. Trim off excess.
Step 4:
Slide on three more beads to a new wire and do the same technique with these. Grip the beads and twist the wire using your thumb and index finger. Trim off your excess wire so that it looks as if there is a branch hanging off.
Step 5:
Wrap your wire around your base about 7 times and then string on three more beads. Twist these beads as well and trim off your excess wire.
Step 6:
Repeat wrapping your wire around the base and adding the beads for however many branches that you desire. You can use one, two, or even three beads for each branch.
Step 7:
Slide your chain through the loop on top of your newly made Cherry Blossom Pendant and you now have a stunning necklace.
How to Make a Lovely Twisted Necklace DIY Jewelry Making TutorialHouseofGems.com
How to Make a Lovely Twisted Necklace
Materials:
6 inches of 20 gauge copper wire
4 inches of 27 gauge copper wire
Three beads of assorted sizes
1 drop bead 6mm x 9mm
Tools:
Wire cutters
Round nose pliers
Step 1:
Create three small loops as shown below.
Step 2:
Create next 2 loops.
Step 3:
Cross the wires as shown in the photo, then wrap one wire around the other to create your pendant shape. Trim one wire.
Step 4:
Put the beads onto the wire, then create hook/loop shape and close it creating a closed loop.
Step 5:
Put drop bead onto thin wire, then, wrap one wire around the other creating a closed loop. Then trim one wire.
Step 6:
Create hook shape and put the wire into the middle of the loop, then close it. Trim the wire if necessary.
Step 7:
Attach your chain to the pendant and your necklace is ready to wear.
The oxidized copper wire earrings seen in the photo look incredibly intricate and difficult to make. Luckily, Kasia from Kica Bijoux has given us an easy to follow tutorial that can be used by any level of expertise when it comes to handmade jewelry. All you need are some drop beads, ear wires, copper beads and your own choice of wire!
Snowman Earrings
Materials:
*2 copper headpins – around 2,5 inch long
*90 cm (35,43’’) of 0,3 mm wire in diameter/ 28 or 29 gauge -cut into 2
Even pieces - 45 cm (17,7’’) each
* 2 rondelle beads - size 3mm x 4mm
* 2 white beads - size around 6mm
* 2 crackle beads - size around 10mm
* 2 copper beads - size around 2.5mm
Tools:
*round-nose pliers
*flat-nose pliers
step 1. String your beads onto the headpin.
step 2. Now take the thin wire and wrap it around the pin.
step 3. Now put the wire under the beads – as close to them as you can, and wrap the wire around the pin.
step 4. You have to repeat step 2 and 3 few times – wrapping wire around the pin
– under and above the beads. You can smooth wrapped part by squeezing it
gently with pliers.
step 5. Now cut the rest of the wires, and move beads to the bottom of the pin.
step 6. Squeeze wires gently, using your pliers as shown on the photos - creating nice "snowmen" shape.
step 7. Short the headpin if you need to and bend it creating little hook, then close the hook.
step 8. Now you have to repeat all steps to make
second earring, then attach ear wires.
Earrings are ready to wear!
Inspired by the night sky, this romantic copper wire and blue agate ring is so simple to make. Learn this easy wire wrapping technique and you’ll have a shimmering collection of delicate gemstone rings in no time at all!
How to Make Ocean Breeze Earrings DIY Jewelry Making TutorialHouseofGems.com
Learn how to make your very own ocean breeze earrings to show off while you stroll along the ocean. These earrings are quick, easy, and take very minimal materials to get them put together.
Materials:
10" of 22 gauge wire
2 copper beads - size 2mm
1 copper bead - size 3mm
1 copper bead - size 3.5mm
3 glass drops - size 6mm x 9mm
Tools:
wire cutters
round nose pliers
Step 1. Put beads on the middle of the wire, then bend the wires like on the photo. (photo 1)
Step 2. Create 2 small loops like it is shown on the photos. (photo2-3)
Step 3. Create another 2 loops and put copper bead (size 3mm) on both wires. (photo 4-5)
Step 4. Put copper beads on the wire (size 2mm) and then bend the wires like it is shown. (photo 6-7)
Step 5. Put copper bead on both wires (size 3,5mm), then wrap one wire around the other and trim it (photo 8-9)
Step 6. Create final loop, and trim all wires which are left. Your pendant is ready, now you have to just hang it on the chain (10-11)
***
photos 12-13 - photos of ready pendant
This beautiful pendant may look complicated, but the design is actually made up of a series of simple wire loops! Kasia used a smooth, aqua-colored fluorite drop to create this necklace.
How to Make Criss Cross Wire Earrings DIY Jewelry Making TutorialHouseofGems.com
How to Make Criss Cross Wire Earrings:
Materials:
Two ear wires
Two 8mm beads
Four 4 to 5mm beads
22 or 24 gauge wire
Two headpins
Tools:
Chain Nose Pliers
Round Nose Pliers
Wire Cutters
Nylon Jaw Pliers (Optional)
Step 1:
Begin by cutting three 6 inch pieces of wire for each earring. Once this is done, bend one wire in half and twist it to create a loop as seen in the photo on the right.
Step 2:
Insert your headpin into the newly made loop on your wire. You are going to do this with all three wires that you have cut.
Step 3:
Slide your bead onto the headpin and wrap one of your wires around the bead and then around the top of the bead ensuring to go around about three times. Trim off excess wire.
Step 4:
Wrap another wire around the bead being sure to trim it once you are done.
Step 5:
Insert your smaller bead onto your headpin and wrap another loose wire around that bead. Trim off excess.
Step 6:
Slide on another one of your beads and trim off the excess wire just as you did in step 5.
Step 7:
Trim off your headpin until you have just enough to make a loop. Then, make a loop using your round nose pliers.
Step 8:
Attach your ear wire to your newly made pendant and you have now handmade your own beautiful earring! Repeat for a marvelous pair.
How to Make Bridal Pearl and Crystal Earrings DIY Jewelry Making TutorialHouseofGems.com
How to Make Bridal and Pearl Crystal Earrings:
Materials:
1 package Swarovski Crystals Bicone Pearl Combo - white
2 silver plated ear wires
2 4mm silver plated jump rings
10 silver plated headpins
11 link-per-inch silver plated chain, 2- 30mm, 2-23mm, 2-17mm, 2-13mm, & 2-5mm pieces.
Tools:
Chain nose pliers
Round nose pliers
Wire cutters
Step 1: Separate your pearls and crystals into two identical groups in preparation to slide them onto the headpin.
Step 2: Slide on your arranged material and create a loop with your round nose pliers.
Step 3: Insert your chain onto your remaining wire that is sticking up. Once that is done, create another loop to keep that chain in place.
Step 4: Cut off your excess wire with your wire cutters and tighten the loop.
Step 5: You can repeat this technique to make as many dangles that you feel necessary for your crystal earrings.
Step 6: Open up your jump ring and attach each dangle that you made. Then attach that to your ear wire and you ave a pair of beautiful handmade earrings!
Materials Needed:
• 7 flat silver headpins
• 6 round silver headpins
• 10 square silver jump rings
• silver medium chain
• 1 silver clasp
• 13 medium black glass beads
• 22 small black glass beads
• 6 medium round brown glass beads
• 17 small brown glass beads
• 0.45mm silver wire
• 2 silver crimp beads
• 2 silver crimp bead covers
• bead crimper
• bead crimps
• crimp cover closer
• pointed nose pliers
• flat nose pliers
Step 1:
Thread a medium sized black bead onto your flat headpin
Step 2:
Thread 2 small black and brown beads onto your flat headpin
Step 3:
Trim off access
Step 4:
Use your round pliers to create a loop
Step 5:
Repeat pattern from step 2 and start another pattern with 3 beads of each color
Step 6:
Thread your bead strand along with a medium round bead
Step 7:
Repeat as shown
Step 8:
Repeat as shown
Step 9:
Thread on two small black beads to each end
Step 10:
Grab the end of the wire, thread on a square jump ring and create loop
Step 11:
Add your crimp bead and secure
Step 12:
Using your crimp tool, crimp bead as shown
Step 13:
Add your crimp bead cover and use your crimp bead cover pliers
Step 14:
Repeat on other end
Step 15:
example of what it should look like
Step 16:
Thread a medium black bead onto a round headpin and trim excess off
Step 17:
Connect your bead onto your square jump ring
Step 18:
Attach another square jump ring and repeat
Step 19:
Repeat pattern for your desired length (black bead and 4 chain lengths)
Step 20:
Attach your silver clasp
Step 21:
Finished product!
How to Make Above The Clouds Pendant Necklace DIY Jewelry Making TutorialHouseofGems.com
Learn how to make this simple yet elegant Above the Clouds Pendant Necklace to go with any style. A great fashion statement perfect for the upcoming Spring season
PDF SubmissionDigital Marketing Institute in NoidaPoojaSaini954651
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
Expert Accessory Dwelling Unit (ADU) Drafting ServicesResDraft
Whether you’re looking to create a guest house, a rental unit, or a private retreat, our experienced team will design a space that complements your existing home and maximizes your investment. We provide personalized, comprehensive expert accessory dwelling unit (ADU)drafting solutions tailored to your needs, ensuring a seamless process from concept to completion.
Transforming Brand Perception and Boosting Profitabilityaaryangarg12
In today's digital era, the dynamics of brand perception, consumer behavior, and profitability have been profoundly reshaped by the synergy of branding, social media, and website design. This research paper investigates the transformative power of these elements in influencing how individuals perceive brands and products and how this transformation can be harnessed to drive sales and profitability for businesses.
Through an exploration of brand psychology and consumer behavior, this study sheds light on the intricate ways in which effective branding strategies, strategic social media engagement, and user-centric website design contribute to altering consumers' perceptions. We delve into the principles that underlie successful brand transformations, examining how visual identity, messaging, and storytelling can captivate and resonate with target audiences.
Methodologically, this research employs a comprehensive approach, combining qualitative and quantitative analyses. Real-world case studies illustrate the impact of branding, social media campaigns, and website redesigns on consumer perception, sales figures, and profitability. We assess the various metrics, including brand awareness, customer engagement, conversion rates, and revenue growth, to measure the effectiveness of these strategies.
The results underscore the pivotal role of cohesive branding, social media influence, and website usability in shaping positive brand perceptions, influencing consumer decisions, and ultimately bolstering sales and profitability. This paper provides actionable insights and strategic recommendations for businesses seeking to leverage branding, social media, and website design as potent tools to enhance their market position and financial success.
Technoblade The Legacy of a Minecraft Legend.Techno Merch
Technoblade, born Alex on June 1, 1999, was a legendary Minecraft YouTuber known for his sharp wit and exceptional PvP skills. Starting his channel in 2013, he gained nearly 11 million subscribers. His private battle with metastatic sarcoma ended in June 2022, but his enduring legacy continues to inspire millions.
Connect Conference 2022: Passive House - Economic and Environmental Solution...TE Studio
Passive House: The Economic and Environmental Solution for Sustainable Real Estate. Lecture by Tim Eian of TE Studio Passive House Design in November 2022 in Minneapolis.
- The Built Environment
- Let's imagine the perfect building
- The Passive House standard
- Why Passive House targets
- Clean Energy Plans?!
- How does Passive House compare and fit in?
- The business case for Passive House real estate
- Tools to quantify the value of Passive House
- What can I do?
- Resources
EASY TUTORIAL OF HOW TO USE CAPCUT BY: FEBLESS HERNANEFebless Hernane
CapCut is an easy-to-use video editing app perfect for beginners. To start, download and open CapCut on your phone. Tap "New Project" and select the videos or photos you want to edit. You can trim clips by dragging the edges, add text by tapping "Text," and include music by selecting "Audio." Enhance your video with filters and effects from the "Effects" menu. When you're happy with your video, tap the export button to save and share it. CapCut makes video editing simple and fun for everyone!