The document summarizes wireless security solutions from Honeywell's 5800 Series that can help security dealers grow their business. It describes products like wireless outdoor motion sensors, glassbreak detectors, temperature sensors, and a wireless indoor asset sensor. These solutions provide additional layers of security protection for homes and businesses, as well as opportunities for recurring monthly revenue. Combining the 5800 Series with Honeywell's Total Connect remote services allows customers to control their system remotely via mobile devices.
Vizia rf + system programming and controlAlarm Grid
The document describes the Vizia RF+ home automation system, including its programming and control features. Key points:
- Vizia RF+ allows wireless control of lighting and appliances through remote controllers and programming devices.
- Programming requires a handheld remote controller or ThinkEssentials software to set up schedules, scenes, and network configuration.
- The system provides benefits like energy savings, multi-room lighting control, and integration of household devices.
The document provides product specifications for Leviton's ViziaRF+ plug-in modules for wireless home control systems. It describes three modules - a plug-in lamp dimming module, plug-in appliance module, and plug-in serial interface module. The lamp and appliance modules allow remote control of connected devices, including dimming and on/off switching. The serial interface module integrates the system with other home automation controllers.
Leviton vrs15 1 lz installation manual and setup guideAlarm Grid
This document provides installation instructions and warnings for a Vizia RF + electronic scene capable switch. It can be installed in single pole or 3-way wiring configurations. The switch communicates via radio frequency and must be included in a Z-Wave network to operate. The instructions describe preparing the wires, connecting them correctly, testing and operating the switch, and include troubleshooting tips. Safety warnings are provided to avoid shock and ensure proper installation.
Leviton vrs05 1 lz installation manual and setup guideAlarm Grid
This document provides installation instructions for a Scene Capable Incandescent Switch. It contains warnings to turn off power before installation and identifies tools needed. It describes identifying wiring applications and preparing/connecting wires for single pole, 3-way, or 3-way with remote switches. Instructions are provided on mounting the switch, restoring power, including the switch in a Z-Wave network, troubleshooting, programming features, and warranty information.
This document provides product specifications for the Vizia RF + Scene Capable Receptacle, which replaces a regular wall receptacle to allow for wireless ON/OFF control of electrical devices plugged into the receptacle. It can be controlled remotely using Vizia RF + Controllers or other Z-Wave controllers. The receptacle provides features such as scene control of multiple lights with one button, wireless mesh networking, a tamper-resistant design, transient surge protection, and compatibility with home automation systems. It is designed for residential use in applications up to 7,500 square feet with 128 devices or less.
Leviton vrp15 z Installation Instructions and Setup GuideAlarm Grid
The Scene Capable Plug-In Appliance Module is a Z-Wave enabled device that can be used to remotely control electrical loads plugged into it via a Z-Wave wireless network. It allows loads to be switched on or off and can be programmed to respond to scenes. The module plugs into a standard wall receptacle and loads plug into the module. It provides reliable wireless communication through a mesh network topology and is easy to install without new wiring. The document provides instructions on including the module in a Z-Wave network and troubleshooting tips.
Leviton vrp03 z product manual and setup guideAlarm Grid
This document provides installation instructions for a Scene Capable Plug-In Lamp Dimming Module rated for 120VAC, 60Hz. It can control incandescent loads between 300W and 14W. The summary includes instructions to install the module by attaching the lamp to be controlled, attaching the module to a wall receptacle, and including the module in a Z-Wave wireless network using a programmer/remote. It also describes operating and troubleshooting the module.
The document summarizes wireless security solutions from Honeywell's 5800 Series that can help security dealers grow their business. It describes products like wireless outdoor motion sensors, glassbreak detectors, temperature sensors, and a wireless indoor asset sensor. These solutions provide additional layers of security protection for homes and businesses, as well as opportunities for recurring monthly revenue. Combining the 5800 Series with Honeywell's Total Connect remote services allows customers to control their system remotely via mobile devices.
Vizia rf + system programming and controlAlarm Grid
The document describes the Vizia RF+ home automation system, including its programming and control features. Key points:
- Vizia RF+ allows wireless control of lighting and appliances through remote controllers and programming devices.
- Programming requires a handheld remote controller or ThinkEssentials software to set up schedules, scenes, and network configuration.
- The system provides benefits like energy savings, multi-room lighting control, and integration of household devices.
The document provides product specifications for Leviton's ViziaRF+ plug-in modules for wireless home control systems. It describes three modules - a plug-in lamp dimming module, plug-in appliance module, and plug-in serial interface module. The lamp and appliance modules allow remote control of connected devices, including dimming and on/off switching. The serial interface module integrates the system with other home automation controllers.
Leviton vrs15 1 lz installation manual and setup guideAlarm Grid
This document provides installation instructions and warnings for a Vizia RF + electronic scene capable switch. It can be installed in single pole or 3-way wiring configurations. The switch communicates via radio frequency and must be included in a Z-Wave network to operate. The instructions describe preparing the wires, connecting them correctly, testing and operating the switch, and include troubleshooting tips. Safety warnings are provided to avoid shock and ensure proper installation.
Leviton vrs05 1 lz installation manual and setup guideAlarm Grid
This document provides installation instructions for a Scene Capable Incandescent Switch. It contains warnings to turn off power before installation and identifies tools needed. It describes identifying wiring applications and preparing/connecting wires for single pole, 3-way, or 3-way with remote switches. Instructions are provided on mounting the switch, restoring power, including the switch in a Z-Wave network, troubleshooting, programming features, and warranty information.
This document provides product specifications for the Vizia RF + Scene Capable Receptacle, which replaces a regular wall receptacle to allow for wireless ON/OFF control of electrical devices plugged into the receptacle. It can be controlled remotely using Vizia RF + Controllers or other Z-Wave controllers. The receptacle provides features such as scene control of multiple lights with one button, wireless mesh networking, a tamper-resistant design, transient surge protection, and compatibility with home automation systems. It is designed for residential use in applications up to 7,500 square feet with 128 devices or less.
Leviton vrp15 z Installation Instructions and Setup GuideAlarm Grid
The Scene Capable Plug-In Appliance Module is a Z-Wave enabled device that can be used to remotely control electrical loads plugged into it via a Z-Wave wireless network. It allows loads to be switched on or off and can be programmed to respond to scenes. The module plugs into a standard wall receptacle and loads plug into the module. It provides reliable wireless communication through a mesh network topology and is easy to install without new wiring. The document provides instructions on including the module in a Z-Wave network and troubleshooting tips.
Leviton vrp03 z product manual and setup guideAlarm Grid
This document provides installation instructions for a Scene Capable Plug-In Lamp Dimming Module rated for 120VAC, 60Hz. It can control incandescent loads between 300W and 14W. The summary includes instructions to install the module by attaching the lamp to be controlled, attaching the module to a wall receptacle, and including the module in a Z-Wave wireless network using a programmer/remote. It also describes operating and troubleshooting the module.
Leviton vri10 1 lz product manual and setup guideAlarm Grid
The document provides installation instructions for a single pole or 3-way scene capable incandescent dimmer, including warnings to consult an electrician if unsure, only using the dimmer for incandescent or halogen fixtures, and that it is not compatible with standard 3-way switches. It details identifying the wiring configuration and connecting wires according to diagrams for single pole or 3-way installations. The instructions also cover including the dimmer in a Z-Wave network and testing operation before mounting in the wall box.
Leviton vri06 1 lz product manual and setup guideAlarm Grid
This document provides installation instructions for a single pole or 3-way scene capable incandescent dimmer. It contains warnings to only be installed according to electrical codes and by a qualified electrician. It also warns not to use the dimmer to control certain devices like fluorescent lights or motors. The instructions summarize identifying the wiring configuration, preparing the wires, and connecting the wires according to whether it is a single pole, 3-way with coordinating remote, or 3-way with matching remote installation. Diagrams illustrate the various wiring options and connection points on the dimmer and remote.
Leviton vrf01 1 lz product manual and setup guideAlarm Grid
This document provides installation instructions for a Leviton Vizia RF+ single pole or 3-way quiet fan speed control. It includes warnings, an introduction to Z-Wave technology, and step-by-step instructions for wiring the fan speed control in single pole or 3-way applications. The instructions also cover including the device in a Z-Wave network and advanced programming features for preset fan speeds and LED options.
This document provides installation instructions for a single pole or 3-way electronic low voltage dimmer. It includes wiring diagrams and steps for identifying the wiring type and preparing/connecting the wires for either a single pole, 3-way with coordinating remote, or 3-way with matching remote installation. The summary also describes features of the dimmer such as compatibility with other Z-Wave enabled devices and ease of installation without new wiring.
Leviton vrcz4 mr, vrcs4-mr, and vrc52-mr product specificationsAlarm Grid
The document provides product specifications for Leviton's ViziaRF+ combination devices, which allow for wireless control of lighting and home automation. The three devices summarized are: 1) A 4-button zone controller that controls up to four zones of lighting; 2) A 4-button scene controller that controls up to four lighting scenes; and 3) A 2-button scene controller that controls two lighting loads and scenes. All devices operate using Z-Wave wireless technology and allow integration of lighting control into homes.
The document provides product specifications for the ViziaRF+ line of wireless home control system controllers from Leviton Manufacturing Co. It includes:
- Descriptions of 6 controller models for remote control of lighting scenes and zones without wiring
- Details on setup and programming options using Z-Wave wireless technology
- Specifications on operating temperature and humidity ranges
- Diagrams of the controller models and wiring installations
- Information on ordering replacement faceplates and remote control accessories
Leviton vrcz1 installation manual and setup guideAlarm Grid
- The document provides instructions for including a 1-zone controller into a Z-Wave network using a Leviton Z-Wave programmer/remote. It involves placing the controller into programming mode, then selecting "include node" on the programmer/remote while standing close to the controller.
- After inclusion, the programmer/remote will assign a home ID, node ID and name for the controller. The document then provides instructions for updating the controller after all other devices have been included.
- The document outlines features of the 1-zone controller such as providing 3-way or 4-way control of lighting loads without traveler wires and two-way communication with dimming and brightness level LEDs.
The document provides installation instructions for a 1-scene controller. It outlines the steps to include the controller in a Z-Wave network using a programmer/remote, which includes putting the controller into programming mode, including it in the network while close to it, and updating the controller after inclusion. It also describes how to exclude the controller from the network and reset it to factory defaults if needed.
Leviton vp00 r 10z, vp00r-1lz, vp0sr-10z, vp0sr-1lz installation manual and s...Alarm Grid
This document provides installation instructions for Lutron 3-way or multi-location remote control devices. It includes warnings, tool requirements, wiring diagrams and step-by-step instructions for installing coordinating or matching remote devices in various 3-way, 4-way and multi-location circuit configurations. Maximum wire lengths and terminal identification is also provided.
Leviton dimmers, switches and fan speed controllersAlarm Grid
The document provides product specifications for Leviton's ViziaRF+ wireless lighting and home control system. It describes the system's wireless technology that creates a mesh network allowing command and control of lights, scenes and zones. Devices include dimmers, switches and a fan speed control that fit into standard wall boxes and provide local and remote control of various lighting loads. The system reduces energy usage and provides elegant lighting scenes and zones with one-button control.
Fluorescent dimmer for hi lume or eco-10 ballastsAlarm Grid
The document provides information about fluorescent dimmers from Leviton that are designed for use with Hi-lume or Eco-10 ballasts. It explains that when an energy saving lamp is used, the dimmer may not turn the lamp on due to the lamp not meeting the minimum wattage required by the ballast. It recommends ensuring the lamp type and wattage are compatible with the ballast in order for the dimmer to provide full on/off and dimming control.
Controlling z wave door locks with the vrc0 pAlarm Grid
This document provides recommendations for reliably controlling Z-Wave door locks with a VRC0P controller. It discusses challenges with battery-operated secure devices and outlines two key steps to ensure reliable communication: 1) Performing a rediscovery at -6dB or lower power level after inclusion, and 2) Completing RSS232 setup, reverse associations, and updating routes using installer tools. It also recommends incorporating a triggered delay when controlling multiple door locks simultaneously to avoid status updates colliding with control commands.
The document provides information on Leviton's Vizia+ collection of lighting controls and home automation products. It includes dimmers, switches, timers, and accessories that allow lighting and appliances to be controlled wirelessly. The Vizia+ products offer advanced lighting control features at a moderate cost and incorporate Z-Wave technology to enable wireless home automation functionality through scenes and zones. The document lists the various Vizia+ models and their specifications and features.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
This document is the programming guide for the ADEMCO VISTA-10P and VISTA-10PSIA security systems. It provides an overview of the various programming modes used to program the system, including data field programming, zone programming, output programming, and scheduling. Instructions are given for entering programming mode, navigating between data fields, and programming system options.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
The document provides installation instructions for replacing rechargeable battery kits in LYNXR-EN/LYNXR-ENSIA and LYNXR-I/LYNXR-ISIA series control panels. The 10 step process involves removing the old battery, installing the new battery kit which includes the battery pack and retainer, reconnecting the battery connector, and allowing 48 hours for the new battery to fully charge. Diagrams show the battery replacement for the LYNXR-EN and LYNXR-I control panels.
The document provides a programming guide for the LYNX Touch Security System. It outlines how to enter programming mode, program various data fields like system settings, zones, keys, and communications, and exit programming mode. Programmable options include changing installer code, setting the date and time, programming zones with attributes like zone type and description, and configuring communication paths and account numbers. The guide also includes diagrams of transmitter loop numbers and system connections.
Leviton vri10 1 lz product manual and setup guideAlarm Grid
The document provides installation instructions for a single pole or 3-way scene capable incandescent dimmer, including warnings to consult an electrician if unsure, only using the dimmer for incandescent or halogen fixtures, and that it is not compatible with standard 3-way switches. It details identifying the wiring configuration and connecting wires according to diagrams for single pole or 3-way installations. The instructions also cover including the dimmer in a Z-Wave network and testing operation before mounting in the wall box.
Leviton vri06 1 lz product manual and setup guideAlarm Grid
This document provides installation instructions for a single pole or 3-way scene capable incandescent dimmer. It contains warnings to only be installed according to electrical codes and by a qualified electrician. It also warns not to use the dimmer to control certain devices like fluorescent lights or motors. The instructions summarize identifying the wiring configuration, preparing the wires, and connecting the wires according to whether it is a single pole, 3-way with coordinating remote, or 3-way with matching remote installation. Diagrams illustrate the various wiring options and connection points on the dimmer and remote.
Leviton vrf01 1 lz product manual and setup guideAlarm Grid
This document provides installation instructions for a Leviton Vizia RF+ single pole or 3-way quiet fan speed control. It includes warnings, an introduction to Z-Wave technology, and step-by-step instructions for wiring the fan speed control in single pole or 3-way applications. The instructions also cover including the device in a Z-Wave network and advanced programming features for preset fan speeds and LED options.
This document provides installation instructions for a single pole or 3-way electronic low voltage dimmer. It includes wiring diagrams and steps for identifying the wiring type and preparing/connecting the wires for either a single pole, 3-way with coordinating remote, or 3-way with matching remote installation. The summary also describes features of the dimmer such as compatibility with other Z-Wave enabled devices and ease of installation without new wiring.
Leviton vrcz4 mr, vrcs4-mr, and vrc52-mr product specificationsAlarm Grid
The document provides product specifications for Leviton's ViziaRF+ combination devices, which allow for wireless control of lighting and home automation. The three devices summarized are: 1) A 4-button zone controller that controls up to four zones of lighting; 2) A 4-button scene controller that controls up to four lighting scenes; and 3) A 2-button scene controller that controls two lighting loads and scenes. All devices operate using Z-Wave wireless technology and allow integration of lighting control into homes.
The document provides product specifications for the ViziaRF+ line of wireless home control system controllers from Leviton Manufacturing Co. It includes:
- Descriptions of 6 controller models for remote control of lighting scenes and zones without wiring
- Details on setup and programming options using Z-Wave wireless technology
- Specifications on operating temperature and humidity ranges
- Diagrams of the controller models and wiring installations
- Information on ordering replacement faceplates and remote control accessories
Leviton vrcz1 installation manual and setup guideAlarm Grid
- The document provides instructions for including a 1-zone controller into a Z-Wave network using a Leviton Z-Wave programmer/remote. It involves placing the controller into programming mode, then selecting "include node" on the programmer/remote while standing close to the controller.
- After inclusion, the programmer/remote will assign a home ID, node ID and name for the controller. The document then provides instructions for updating the controller after all other devices have been included.
- The document outlines features of the 1-zone controller such as providing 3-way or 4-way control of lighting loads without traveler wires and two-way communication with dimming and brightness level LEDs.
The document provides installation instructions for a 1-scene controller. It outlines the steps to include the controller in a Z-Wave network using a programmer/remote, which includes putting the controller into programming mode, including it in the network while close to it, and updating the controller after inclusion. It also describes how to exclude the controller from the network and reset it to factory defaults if needed.
Leviton vp00 r 10z, vp00r-1lz, vp0sr-10z, vp0sr-1lz installation manual and s...Alarm Grid
This document provides installation instructions for Lutron 3-way or multi-location remote control devices. It includes warnings, tool requirements, wiring diagrams and step-by-step instructions for installing coordinating or matching remote devices in various 3-way, 4-way and multi-location circuit configurations. Maximum wire lengths and terminal identification is also provided.
Leviton dimmers, switches and fan speed controllersAlarm Grid
The document provides product specifications for Leviton's ViziaRF+ wireless lighting and home control system. It describes the system's wireless technology that creates a mesh network allowing command and control of lights, scenes and zones. Devices include dimmers, switches and a fan speed control that fit into standard wall boxes and provide local and remote control of various lighting loads. The system reduces energy usage and provides elegant lighting scenes and zones with one-button control.
Fluorescent dimmer for hi lume or eco-10 ballastsAlarm Grid
The document provides information about fluorescent dimmers from Leviton that are designed for use with Hi-lume or Eco-10 ballasts. It explains that when an energy saving lamp is used, the dimmer may not turn the lamp on due to the lamp not meeting the minimum wattage required by the ballast. It recommends ensuring the lamp type and wattage are compatible with the ballast in order for the dimmer to provide full on/off and dimming control.
Controlling z wave door locks with the vrc0 pAlarm Grid
This document provides recommendations for reliably controlling Z-Wave door locks with a VRC0P controller. It discusses challenges with battery-operated secure devices and outlines two key steps to ensure reliable communication: 1) Performing a rediscovery at -6dB or lower power level after inclusion, and 2) Completing RSS232 setup, reverse associations, and updating routes using installer tools. It also recommends incorporating a triggered delay when controlling multiple door locks simultaneously to avoid status updates colliding with control commands.
The document provides information on Leviton's Vizia+ collection of lighting controls and home automation products. It includes dimmers, switches, timers, and accessories that allow lighting and appliances to be controlled wirelessly. The Vizia+ products offer advanced lighting control features at a moderate cost and incorporate Z-Wave technology to enable wireless home automation functionality through scenes and zones. The document lists the various Vizia+ models and their specifications and features.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
This document is the programming guide for the ADEMCO VISTA-10P and VISTA-10PSIA security systems. It provides an overview of the various programming modes used to program the system, including data field programming, zone programming, output programming, and scheduling. Instructions are given for entering programming mode, navigating between data fields, and programming system options.
Alarm Grid Home Security http://www.alarmgrid.com/ has provided this pdf with the permission and courtesy of Honeywell.
Alarm Grid is a home security product and alarm monitoring company that loves its customers. We have a strong appreciation of the DIY community, and want to make sure that we not only provide the best products and services out there but we also want to make sure that resources like these Honeywell product pdfs are easily accessible so that or curious customers can find what they need when they need it.
The document provides installation instructions for replacing rechargeable battery kits in LYNXR-EN/LYNXR-ENSIA and LYNXR-I/LYNXR-ISIA series control panels. The 10 step process involves removing the old battery, installing the new battery kit which includes the battery pack and retainer, reconnecting the battery connector, and allowing 48 hours for the new battery to fully charge. Diagrams show the battery replacement for the LYNXR-EN and LYNXR-I control panels.
The document provides a programming guide for the LYNX Touch Security System. It outlines how to enter programming mode, program various data fields like system settings, zones, keys, and communications, and exit programming mode. Programmable options include changing installer code, setting the date and time, programming zones with attributes like zone type and description, and configuring communication paths and account numbers. The guide also includes diagrams of transmitter loop numbers and system connections.