Home appliances controller using wireless controller area network (1)
•Download as DOCX, PDF•
0 likes•271 views
These documents discuss using wireless and Ethernet networks to control home appliances, monitor structures, synchronize distributed control systems, control marine gas turbines, and predictively control industrial hydraulic machines. Wireless and Ethernet networks can be implemented as field buses to connect sensors and controllers for various applications in distributed control systems.
Report
Share
Report
Share
Recommended
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, wireless remote monitoring systems using Zigbee, online control of robots using fuzzy logic and virtual instrumentation, image processing techniques like optical flow estimation and structural texture similarity, and hardware designs like an FFT processor for MIMO-OFDM systems and self-repairing digital systems inspired by endocrine cellular communication.
Et0117 power electronics embedded power system vlsi l abview titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, wireless remote monitoring systems using Zigbee, online control of robots using fuzzy logic and LabVIEW, image processing techniques like optical flow estimation and structural texture similarity, and hardware designs like an FFT processor for MIMO systems and a self-repairing digital system inspired by endocrine cellular communication.
Technical specifications for three phase meters
The document provides technical specifications for a three phase energy meter. It lists standards and regulations the meter must comply with, general technical requirements including accuracy class, voltage and frequency ranges, and environmental testing standards. It also specifies billing and measurement capabilities like time-of-day metering, load survey data collection, anti-tamper features, and communication protocols for remote data retrieval.
Measurement of NPK, Temperature, Moisture, Humidity using WSN
In India, where the economy is mainly base on agriculture and the climatic conditions are isotropic and are not
able to make full use of agricultural resources. The main reason is the lack of rains and scarifies of land
reservoir water and overused of fertilizers so we need to control these parameters. This system made wireless
sensor network for monitoringagricultural environments for various factors such as NPK, temperature and
humidity along with other factors can be of significance.By using pH sensors we get the information about the
soil and analyze the acid level of the soil. By which we can apply fertilizer to the place where it needs, also we
can avoid over fertilization of the crops. We used humidity sensor to sense the weather. By this the farmer can
get idea about the climate. If there is any chance for rainfall; the farmer need not irrigate the crop field. This
Seminar reports the design and development of a smart wireless sensor network (WSN) for an agricultural
environment. Monitoring agricultural environments for various factors such as Nitrates, Zink, Potassium,
Phosphorus, Humidity and Temperature along with other factors can be of significance. The ability to document
and detail changes in parameters of interest has become increasingly valuable. Investigations were performed
for a remote monitoring system using WiFi, where the wireless sensor nodes are based on WSN802G modules.
These nodes send data wirelessly to a central server, which collects the data, stores it and allows it to be
analyzed and displayed as needed.
2014 ieee embedded projects
This document lists 50 project titles from IEEE conferences on topics related to embedded systems, image processing, communications, and power line communications (PLC). Some of the project titles involve developing low-cost monitoring systems using technologies like ZigBee, building health monitoring applications, designing motor control systems, and analyzing wireless sensor networks. The document provides contact information for Ecway Technologies, an organization that appears to offer support for IEEE projects.
Light level and gas monitoring system
This document introduces a light level and gas monitoring system that consists of sensors to measure light, methane, butane, propane, LPG and smoke levels in a room. The system alerts users via SMS and buzzer if light levels are low or gas is detected. It uses a photo-resistor to measure light, an MQ-2 gas sensor, an LCD display, and a SIM800l GSM module connected to an Arduino Uno microcontroller. The system is less bulky than former systems and can provide real-time data on measured quantities via the microcontroller. It has advantages over analog and some digital systems in providing unambiguous data and a more functional design.
Gas detection robot ppt
This document describes a gas leak detection system using an AT89S52 microcontroller. Gas is detected using sensors and alarms are triggered via a buzzer. The system uses a ULN2003 driver and stepper motors to move the detection board. The microcontroller controls the overall system and stops motor movement upon gas detection. The project aims to safely detect leaks in applications like kitchens and industrial sites.
Iot gas pipe leakage detector insect robot
This document describes an IOT gas pipe leakage detector robot. The robot clings to the outer surface of gas pipes and moves along the pipe to detect any gas leaks using an onboard gas sensor. If a leak is detected, the robot uses GPS and IOT to transmit the location of the leak. The robot is designed to detect leaks in gas pipes automatically and at low cost by moving continuously along the pipe. It consists of components like a Raspberry Pi, gas sensor, GPS module, and uses Python software.
Recommended
Power electronics embedded power system titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, wireless remote monitoring systems using Zigbee, online control of robots using fuzzy logic and virtual instrumentation, image processing techniques like optical flow estimation and structural texture similarity, and hardware designs like an FFT processor for MIMO-OFDM systems and self-repairing digital systems inspired by endocrine cellular communication.
Et0117 power electronics embedded power system vlsi l abview titles
The document discusses various topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI. Some key areas covered include voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, battery chargers for electric vehicles, reactive power compensation in microgrids, wireless remote monitoring systems using Zigbee, online control of robots using fuzzy logic and LabVIEW, image processing techniques like optical flow estimation and structural texture similarity, and hardware designs like an FFT processor for MIMO systems and a self-repairing digital system inspired by endocrine cellular communication.
Technical specifications for three phase meters
The document provides technical specifications for a three phase energy meter. It lists standards and regulations the meter must comply with, general technical requirements including accuracy class, voltage and frequency ranges, and environmental testing standards. It also specifies billing and measurement capabilities like time-of-day metering, load survey data collection, anti-tamper features, and communication protocols for remote data retrieval.
Measurement of NPK, Temperature, Moisture, Humidity using WSN
In India, where the economy is mainly base on agriculture and the climatic conditions are isotropic and are not
able to make full use of agricultural resources. The main reason is the lack of rains and scarifies of land
reservoir water and overused of fertilizers so we need to control these parameters. This system made wireless
sensor network for monitoringagricultural environments for various factors such as NPK, temperature and
humidity along with other factors can be of significance.By using pH sensors we get the information about the
soil and analyze the acid level of the soil. By which we can apply fertilizer to the place where it needs, also we
can avoid over fertilization of the crops. We used humidity sensor to sense the weather. By this the farmer can
get idea about the climate. If there is any chance for rainfall; the farmer need not irrigate the crop field. This
Seminar reports the design and development of a smart wireless sensor network (WSN) for an agricultural
environment. Monitoring agricultural environments for various factors such as Nitrates, Zink, Potassium,
Phosphorus, Humidity and Temperature along with other factors can be of significance. The ability to document
and detail changes in parameters of interest has become increasingly valuable. Investigations were performed
for a remote monitoring system using WiFi, where the wireless sensor nodes are based on WSN802G modules.
These nodes send data wirelessly to a central server, which collects the data, stores it and allows it to be
analyzed and displayed as needed.
2014 ieee embedded projects
This document lists 50 project titles from IEEE conferences on topics related to embedded systems, image processing, communications, and power line communications (PLC). Some of the project titles involve developing low-cost monitoring systems using technologies like ZigBee, building health monitoring applications, designing motor control systems, and analyzing wireless sensor networks. The document provides contact information for Ecway Technologies, an organization that appears to offer support for IEEE projects.
Light level and gas monitoring system
This document introduces a light level and gas monitoring system that consists of sensors to measure light, methane, butane, propane, LPG and smoke levels in a room. The system alerts users via SMS and buzzer if light levels are low or gas is detected. It uses a photo-resistor to measure light, an MQ-2 gas sensor, an LCD display, and a SIM800l GSM module connected to an Arduino Uno microcontroller. The system is less bulky than former systems and can provide real-time data on measured quantities via the microcontroller. It has advantages over analog and some digital systems in providing unambiguous data and a more functional design.
Gas detection robot ppt
This document describes a gas leak detection system using an AT89S52 microcontroller. Gas is detected using sensors and alarms are triggered via a buzzer. The system uses a ULN2003 driver and stepper motors to move the detection board. The microcontroller controls the overall system and stops motor movement upon gas detection. The project aims to safely detect leaks in applications like kitchens and industrial sites.
Iot gas pipe leakage detector insect robot
This document describes an IOT gas pipe leakage detector robot. The robot clings to the outer surface of gas pipes and moves along the pipe to detect any gas leaks using an onboard gas sensor. If a leak is detected, the robot uses GPS and IOT to transmit the location of the leak. The robot is designed to detect leaks in gas pipes automatically and at low cost by moving continuously along the pipe. It consists of components like a Raspberry Pi, gas sensor, GPS module, and uses Python software.
Monitoring 1
The document describes a gas leakage detection automatic robot. The robot uses an MQ6 sensor to detect gas leaks along gas pipelines. If a leak is detected, the robot beeps at the location and returns to the regulator switch to turn off the gas system. The robot localizes gas leakage sources without human intervention for applications in industries, mining, gas distribution, and homes. The robot can detect leaks in places that are dangerous for people to access and helps avoid accidents and destruction from gas leaks.
Sci 801 smart air quality sensor
SCI -801 is a professional micro-instrumentation, which can online monitor TVOC, temperature, and humidity in the atmospheric environment. With wireless communication technology, a large number of sensor nodes can communicate with servers securely and send large environmental data to the cloud platform. Conventional Air Quality Monitoring System does not cover most places of cities/ towns and cannot accurately represent where the pollution is coming from since it is costly.
CWS - Professional Weather Stations
This document summarizes weather monitoring equipment and options from a company, including various weather station configurations that can be fixed mount, portable, or vehicle mount. It also describes several sensor models and monitoring options ranging from software and apps to industrial interfaces. Customers can select the sensors and monitoring methods needed for their specific application.
Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues a...
Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues a...International Journal of Engineering Inventions www.ijeijournal.com
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.Power electronics embedded power system vlsi l abview titles
The document discusses several topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI circuits. Specifically, it provides summaries of recent projects related to voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, and improved DC-DC converters. It also lists project ideas involving power quality improvement, reactive power compensation, and automatic load shedding schemes. Additional sections outline embedded system projects involving wireless monitoring, water quality monitoring, and motor control. Application areas for LabVIEW include online control of robots and remote experimentation. Image processing projects involve tasks like video object extraction, tracking, and defect detection. The final section lists recent
B42060609
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Project presentation on wireless lpg leakage detector
The document presents a project on designing a wireless LPG leakage detector. It includes:
1) An introduction on the dangers of LPG leakage and the need for detection.
2) A review of existing gas leakage detector designs including those using MQ6 and PIC microcontrollers.
3) Details on the design of the wireless LPG leakage detector including components like the ATMEGA microcontroller, MQ5 gas sensor, GSM modem and power supply.
4) An explanation of how the system works to detect LPG leakage and send alert messages via GSM.
5) Results showing the prototype and its operation in simulations and testing.
Elspec g4420 blackbox_fixed_power_quality_analyzer_datasheet
Elspec G4420 Blackbox Fixed Power Quality Analyzer- Elspec G4000 BLACKBOX is the next generation in power quality analyzers. No Triggers/No Thresholds meaning no missed events at anytime. The G4K provides accurate detection and isolation of power quality monitoring.
Available for sales, rentals, hire and lease @ http://www.supremetechnology.com.au/product/elspec-g4420-blackbox-fixed-power-quality-analyzer.aspx?Id=297&ProductType=New
sonnen solar tracker 1/2
This document provides technical specifications for three photovoltaic tracking systems (sonnen_system 3_30, 3_40, 3_60) including their dimensions, weight, components, performance specifications, safety features, and monitoring capabilities. The tracking systems use an astronomical control unit and electric drives to track the sun for increased energy yield compared to fixed systems. They integrate with SMA communication and monitoring equipment to enable remote operation and performance monitoring.
More Related Content
What's hot
Monitoring 1
The document describes a gas leakage detection automatic robot. The robot uses an MQ6 sensor to detect gas leaks along gas pipelines. If a leak is detected, the robot beeps at the location and returns to the regulator switch to turn off the gas system. The robot localizes gas leakage sources without human intervention for applications in industries, mining, gas distribution, and homes. The robot can detect leaks in places that are dangerous for people to access and helps avoid accidents and destruction from gas leaks.
Sci 801 smart air quality sensor
SCI -801 is a professional micro-instrumentation, which can online monitor TVOC, temperature, and humidity in the atmospheric environment. With wireless communication technology, a large number of sensor nodes can communicate with servers securely and send large environmental data to the cloud platform. Conventional Air Quality Monitoring System does not cover most places of cities/ towns and cannot accurately represent where the pollution is coming from since it is costly.
CWS - Professional Weather Stations
This document summarizes weather monitoring equipment and options from a company, including various weather station configurations that can be fixed mount, portable, or vehicle mount. It also describes several sensor models and monitoring options ranging from software and apps to industrial interfaces. Customers can select the sensors and monitoring methods needed for their specific application.
Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues a...
Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues a...International Journal of Engineering Inventions www.ijeijournal.com
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.Power electronics embedded power system vlsi l abview titles
The document discusses several topics related to power electronics, power systems, embedded systems, LabVIEW, image processing, and VLSI circuits. Specifically, it provides summaries of recent projects related to voltage control of smart transformers in microgrids, maximum power point tracking for photovoltaic systems, digital control of arc welding machines, and improved DC-DC converters. It also lists project ideas involving power quality improvement, reactive power compensation, and automatic load shedding schemes. Additional sections outline embedded system projects involving wireless monitoring, water quality monitoring, and motor control. Application areas for LabVIEW include online control of robots and remote experimentation. Image processing projects involve tasks like video object extraction, tracking, and defect detection. The final section lists recent
B42060609
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Project presentation on wireless lpg leakage detector
The document presents a project on designing a wireless LPG leakage detector. It includes:
1) An introduction on the dangers of LPG leakage and the need for detection.
2) A review of existing gas leakage detector designs including those using MQ6 and PIC microcontrollers.
3) Details on the design of the wireless LPG leakage detector including components like the ATMEGA microcontroller, MQ5 gas sensor, GSM modem and power supply.
4) An explanation of how the system works to detect LPG leakage and send alert messages via GSM.
5) Results showing the prototype and its operation in simulations and testing.
Elspec g4420 blackbox_fixed_power_quality_analyzer_datasheet
Elspec G4420 Blackbox Fixed Power Quality Analyzer- Elspec G4000 BLACKBOX is the next generation in power quality analyzers. No Triggers/No Thresholds meaning no missed events at anytime. The G4K provides accurate detection and isolation of power quality monitoring.
Available for sales, rentals, hire and lease @ http://www.supremetechnology.com.au/product/elspec-g4420-blackbox-fixed-power-quality-analyzer.aspx?Id=297&ProductType=New
sonnen solar tracker 1/2
This document provides technical specifications for three photovoltaic tracking systems (sonnen_system 3_30, 3_40, 3_60) including their dimensions, weight, components, performance specifications, safety features, and monitoring capabilities. The tracking systems use an astronomical control unit and electric drives to track the sun for increased energy yield compared to fixed systems. They integrate with SMA communication and monitoring equipment to enable remote operation and performance monitoring.
What's hot (9)
Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues a...
Wireless Sensor Network in Niger Delta Oil and Gas Field Monitoring: Issues a...
Power electronics embedded power system vlsi l abview titles
Power electronics embedded power system vlsi l abview titles
Project presentation on wireless lpg leakage detector
Project presentation on wireless lpg leakage detector
Elspec g4420 blackbox_fixed_power_quality_analyzer_datasheet
Elspec g4420 blackbox_fixed_power_quality_analyzer_datasheet
Home appliances controller using wireless controller area network (1)
- 1. Home appliances controller using wireless controller area network (WCAN) system Structural Monitoring using Wireless Sensors and Controller Area Network Switched Ethernet in Synchronized Distributed Control Systems Using RTnet Research on Local Area Network of Marine Gas Turbine Distributed Control System Using A Control System Ethernet Network as a Field Bus Ethernet-based predictive control of an industrial hydraulic machine