Halliburton

•

0 likes•36 views

Hassan Khan

Webinar on Nexus Software of Halliburton Oilfield Services, the software that enables Integrated Asset Modelling.

Engineering

Recently uploaded

İTÜ CAD and Reverse Engineering Workshop

Emre Günaydın

WATER CRISIS and its solutions-pptx 1234

AafreenAbuthahir2

A computer reservation system or central reservation system is a computerized system used to store and retrieve information and conduct transactions related to air travel, hotels, car rental, or activities. These systems typically allow users to book hotel rooms, rental cars, airline tickets as well as activities and tours. They also provide access to railway reservations and bus reservations in some markets, although these are not always integrated with the main system. For these systems to be accessible on mobile phones and computers outside the premises of the airport, cinema, train station or stadiums, they need to be on the internet or a network. This project focuses on the design and implementation of a web based cinema management system for the allocation of seat tickets online. The system would feature the registration of users, use of serial numbers and pins gotten from scratch cards sold and a printed slip. The system would have a store of all the seats and automate the generation of fresh serial numbers and pins.

A case study of cinema management system project report..pdf

Kamal Acharya

fundamentals of drawing and isometric and orthographic projection

jeevanprasad8

Peek implant persentation - Copy (1).pdf

Ayahmorsy

KIT-601 Lecture Notes-UNIT-3.pdf Mining Data Stream

Dr. Radhey Shyam

In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on. My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways. In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.

Event Management System Vb Net Project Report.pdf

Kamal Acharya

Construction method of steel structure space frame .pptx

wendy cai

KIT-601 Lecture Notes-UNIT-4.pdf Frequent Itemsets and Clustering

Dr. Radhey Shyam

Q.1 A single plate clutch with both sides of the plate effective is required to transmit 25 kW at 1600 r.p.m. The outer diameter of the plate is limited to 300 mm and the intensity of pressure between the plates not to exceed 0.07N / m * m ^ 2 Assuming uniform wear and coefficient of friction 0.3, find the inner diameter of the plates and the axial force necessary to engage the clutch. Q.2 A multiple disc clutch has radial width of the friction material as 1/5th of the maximum radius. The coefficient of friction is 0.25. Find the total number of discs required to transmit 60 kW at 3000 r.p.m. The maximum diameter of the clutch is 250 mm and the axial force is limited to 600 N. Also find the mean unit pressure on each contact surface. Q.3 A cone clutch is to be designed to transmit 7.5 kW at 900 r.p.m. The cone has a face angle of 12°. The width of the face is half of the mean radius and the normal pressure between the contact faces is not to exceed 0.09 N/mm². Assuming uniform wear and the coefficient of friction between the contact faces as 0.2, find the main dimensions of the clutch and the axial force required to engage the clutch. Q.4 A cone clutch is mounted on a shaft which transmits power at 225 r.p.m. The small diameter of the cone is 230 mm, the cone face is 50 mm and the cone face makes an angle of 15 deg with the horizontal. Determine the axial force necessary to engage the clutch to transmit 4.5 kW if the coefficient of friction of the contact surfaces is 0.25. What is the maximum pressure on the contact surfaces assuming uniform wear? Q.5 A soft surface cone clutch transmits a torque of 200 N-m at 1250 r.p.m. The larger diameter of the clutch is 350 mm. The cone pitch angle is 7.5 deg and the face width is 65 mm. If the coefficient of friction is 0.2. find: 1. the axial force required to transmit the torque: 2. the axial force required to engage the clutch; 3. the average normal pressure on the contact surfaces when the maximum torque is being transmitted; and 4. the maximum normal pressure assuming uniform wear. Q.6 A single block brake, as shown in Fig. 1. has the drum diameter 250 mm. The angle of contact is 90° and the coefficient of friction between the drum and the lining is 0.35. If the torque transmitted by the brake is 70 N-m, find the force P required to operate the brake. Q.7 The layout and dimensions of a double shoe brake is shown in Fig. 2. The diameter of the brake drum is 300 mm and the contact angle for each shoe is 90°. If the coefficient of friction for the brake lining and the drum is 0.4, find the spring force necessary to transmit a torque of 30 N-m. Also determine the width of the brake shoes, if the bearing pressure on the lining material is not to exceed 0.28N / m * m ^ 2

RS Khurmi Machine Design Clutch and Brake Exercise Numerical Solutions

Atif Razi

NO1 Pandit Amil Baba In Bahawalpur, Sargodha, Sialkot, Sheikhupura, Rahim Yar...

Amil baba

ASME IX(9) 2007 Full Version .pdf

AhmedHussein950959

ENERGY STORAGE DEVICES INTRODUCTION UNIT-I

VigneshvaranMech

Introduction to Machine Learning Unit-4 Notes for II-II Mechanical Engineering

C Sai Kiran

IT-601 Lecture Notes-UNIT-2.pdf Data Analysis

Dr. Radhey Shyam

Pharmacy management system project report..pdf

Kamal Acharya

Natalia Rutkowska - BIM School Course in Kraków

bim.edu.pl

2024 DevOps Pro Europe - Growing at the edge

Paco Orozco

Online movie ticket booking system for movies is a web-based program. This application allows users to purchase cinema tickets over the portal. To buy tickets, people must first register or log in. This website's backend is PHP and JavaScript, and the front end is HTML and CSS. All phases of the software development life cycle are efficiently managed in order to design and implement software. On the website, there are two panels: one for administrators and one for customers/users. The admin has the ability to add cinemas, movies, delete, halt execution, and add screens, among other things. The website is simple to navigate and appealing, saving the end user time.

A CASE STUDY ON ONLINE TICKET BOOKING SYSTEM PROJECT.pdf

Kamal Acharya

The project developers created a system entitled Resort Management and Reservation System; it will provide better management and monitoring of the services in every resort business, especially D’ Rock Resort. To accommodate those out-of-town guests who want to remain and utilize the resort's services, the proponents planned to automate the business procedures of the resort and implement the system. As a result, it aims to improve business profitability, lower expenses, and speed up the resort's transaction processing. The resort will now be able to serve those potential guests, especially during the high season. Using websites for faster transactions to reserve on your desired time and date is another step toward technological advancement. Customers don’t need to walk in and hold in line for several hours. There is no problem in converting a paper-based transaction online; it's just the system that will be used that will help the resort expand. Moreover, Gerard (2012) stated that “The flexible online information structure was developed as a tool for the reservation theory's two primary applications. Computer use is more efficient, accurate, and faster than a manual or present lifestyle of operation. Using a computer has a vital role in our daily life and the advantages of the devices we use.

RESORT MANAGEMENT AND RESERVATION SYSTEM PROJECT REPORT.pdf

Kamal Acharya

Recently uploaded (20)

İTÜ CAD and Reverse Engineering Workshop

WATER CRISIS and its solutions-pptx 1234

A case study of cinema management system project report..pdf

fundamentals of drawing and isometric and orthographic projection

Peek implant persentation - Copy (1).pdf

KIT-601 Lecture Notes-UNIT-3.pdf Mining Data Stream

Event Management System Vb Net Project Report.pdf

Construction method of steel structure space frame .pptx

KIT-601 Lecture Notes-UNIT-4.pdf Frequent Itemsets and Clustering

RS Khurmi Machine Design Clutch and Brake Exercise Numerical Solutions

NO1 Pandit Amil Baba In Bahawalpur, Sargodha, Sialkot, Sheikhupura, Rahim Yar...

ASME IX(9) 2007 Full Version .pdf

ENERGY STORAGE DEVICES INTRODUCTION UNIT-I

Introduction to Machine Learning Unit-4 Notes for II-II Mechanical Engineering

IT-601 Lecture Notes-UNIT-2.pdf Data Analysis

Pharmacy management system project report..pdf

Natalia Rutkowska - BIM School Course in Kraków

2024 DevOps Pro Europe - Growing at the edge

A CASE STUDY ON ONLINE TICKET BOOKING SYSTEM PROJECT.pdf

RESORT MANAGEMENT AND RESERVATION SYSTEM PROJECT REPORT.pdf

Halliburton

Recommended

Recommended

More Related Content

More from Hassan Khan

More from Hassan Khan (8)

Recently uploaded

Recently uploaded (20)