Testing/Manufacture/GSM Test Kit
•
0 likes•342 views
This document provides a catalogue for GSM round cutters and testing equipment from FEC, an ISO 9001 certified company. It describes a GSM kit that uses a drawing action to cut accurate circular samples from materials like cardboard, paper, and synthetic leather. The kit includes a cutting pad, circular sharp cutting edge, and is made of aluminum. It also describes a GSM sample cutter that takes precise, accurate readings and has a simple battery operation with bright LED display. Finally, it mentions a GSM weighing scale that has a chemical resistant pan, air shield cover, and double display, with a measurement range of 0.01g to 300g.
Report
Share
Report
Share
Download to read offline
Recommended
I-COFTEK 3300-film test
i-COFTEK 3300 Coefficient of Friction Tester is designed to determine static and dynamic coefficient of friction tests of plastic films, sheets, rubber, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc. Additionally the instrument could be used to test the smoothness of cosmetics, eye drops and other daily chemical products
I-COFTEK 3500-film test
i-COFTEK 3500 Friction & Peel Tester is designed to determine static and kinetic coefficient of friction tests of plastic films, sheets, foils, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandages, release paper and protective films, etc.
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Industrial Quality Standard
This document discusses quality standards in manufacturing. It states that quality standards are used to identify and eliminate defects in products before they reach customers. This is important in modern manufacturing where large volumes of products are made quickly, and defects could hamper production. Implementing quality standards provides benefits like increased customer loyalty and compliance, reduced waste, improved safety, and increased profits by preventing costly recalls. The document also notes that quality standards must be well-defined by specifying exact parameters for products, such as the thread count and materials for bed sheets. Periodic inspections are needed to ensure consistency with the standards.
Testing/Manufacture/Thickness tester
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. They offer both digital and analog thickness testers. The digital thickness tester is a handy model while the analog model includes a stand. Both testers have a measurement range of 0.01 mm to 10 mm, are maintenance free, and have a lever to move the measuring point up and down.
Ajit singh - Resume
Ajit Singh is seeking a job where he can utilize his skills and knowledge to help an organization grow. He has over 15 years of experience in quality control, including positions at various companies in India and Dubai. His responsibilities included inspecting raw materials and products, testing for compliance with standards, and managing production teams. He is proficient in testing materials like fabrics, plastics, chemicals and finished ballistic products. Ajit Singh has a BSc degree and technical skills in documentation, testing equipment operation, and computer programs. He aims to contribute his dedication and positive attitude to further his career.
COF-P01-Inclined-Surface-Coefficient-of-Friction-Tester
COF-P01 Inclined Surface Coefficient of Friction Tester can be used for coefficient of friction tests for paper, cardboard, plastic films, sheets, and conveyor belt and etc. By the smoothness measurement, it can be used to adjust the open easiness of pouches, packaging speed of packing machine and other quality indexes so as to meet the application demands.
Introduction Letter - Precision Spares for Rolling Mills
Profile Gauge & Tool Co Ltd is a precision engineering company that manufactures and reconditions parts for rolling mills, including pinion shafts, tapered sleeves, and flingers. They have over 25 years of experience supplying parts to mills around the world. The company offers new parts manufacturing to customer specifications as well as a reconditioning service to refurbish used parts. They are constantly innovating, such as developing a new tapered sleeve that lasts 20-30% longer than competitors' sleeves. The document provides details on their product range and manufacturing capabilities.
Recommended
I-COFTEK 3300-film test
i-COFTEK 3300 Coefficient of Friction Tester is designed to determine static and dynamic coefficient of friction tests of plastic films, sheets, rubber, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc. Additionally the instrument could be used to test the smoothness of cosmetics, eye drops and other daily chemical products
I-COFTEK 3500-film test
i-COFTEK 3500 Friction & Peel Tester is designed to determine static and kinetic coefficient of friction tests of plastic films, sheets, foils, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandages, release paper and protective films, etc.
Phased array type b block
APPLICATION: Used for beam Characterization and evaluation of system performance characteristics. Use it as baseline block to determine long-term instrument performance changes, generate DAC Curves and Evaluate linear/ Angular resolution , Focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonic capabilities
Industrial Quality Standard
This document discusses quality standards in manufacturing. It states that quality standards are used to identify and eliminate defects in products before they reach customers. This is important in modern manufacturing where large volumes of products are made quickly, and defects could hamper production. Implementing quality standards provides benefits like increased customer loyalty and compliance, reduced waste, improved safety, and increased profits by preventing costly recalls. The document also notes that quality standards must be well-defined by specifying exact parameters for products, such as the thread count and materials for bed sheets. Periodic inspections are needed to ensure consistency with the standards.
Testing/Manufacture/Thickness tester
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. They offer both digital and analog thickness testers. The digital thickness tester is a handy model while the analog model includes a stand. Both testers have a measurement range of 0.01 mm to 10 mm, are maintenance free, and have a lever to move the measuring point up and down.
Ajit singh - Resume
Ajit Singh is seeking a job where he can utilize his skills and knowledge to help an organization grow. He has over 15 years of experience in quality control, including positions at various companies in India and Dubai. His responsibilities included inspecting raw materials and products, testing for compliance with standards, and managing production teams. He is proficient in testing materials like fabrics, plastics, chemicals and finished ballistic products. Ajit Singh has a BSc degree and technical skills in documentation, testing equipment operation, and computer programs. He aims to contribute his dedication and positive attitude to further his career.
COF-P01-Inclined-Surface-Coefficient-of-Friction-Tester
COF-P01 Inclined Surface Coefficient of Friction Tester can be used for coefficient of friction tests for paper, cardboard, plastic films, sheets, and conveyor belt and etc. By the smoothness measurement, it can be used to adjust the open easiness of pouches, packaging speed of packing machine and other quality indexes so as to meet the application demands.
Introduction Letter - Precision Spares for Rolling Mills
Profile Gauge & Tool Co Ltd is a precision engineering company that manufactures and reconditions parts for rolling mills, including pinion shafts, tapered sleeves, and flingers. They have over 25 years of experience supplying parts to mills around the world. The company offers new parts manufacturing to customer specifications as well as a reconditioning service to refurbish used parts. They are constantly innovating, such as developing a new tapered sleeve that lasts 20-30% longer than competitors' sleeves. The document provides details on their product range and manufacturing capabilities.
Testing/Manufacture/Gsm
FEC is an ISO 9001 certified company that produces high quality testing equipment including a GSM round cutter and GSM weighing scale. The GSM round cutter uses a drawing action to cut circular samples with smooth edges from a variety of materials up to 5mm thick, including paper, cardboard, film and leather. The GSM weighing scale provides precise, accurate readings from 0.01g to 300g through simple battery operation and a bright LED display. It is designed for laboratory and research use with a chemical resistant pan and air shield cover.
Testing/Manufacture/Filter Cover Plate Run out fixture
This 3 sentence summary provides the key details about a filter testing equipment company:
The document describes FEC, an ISO 9001 certified company that manufactures world class filter testing equipment, including a filter run out fixture that can test filter cover plates and assemblies by changing filter threads on adjustable mandrels using either an analog or digital dial readout.
The company contact information is listed along with a description of the filter run out fixture's capacity to change mounted threads and adjust fixtures up to various thread sizes based on customer requirements.
Testing/Manufacture/Filter Run Out Fixture
This 3 sentence summary provides the key details about a filter testing equipment company:
The document describes FEC, an ISO 9001 certified company that manufactures world class filter testing equipment, including a filter run out fixture that can test filter cover plates and assemblies by changing filter threads on adjustable mandrels using either an analog or digital dial readout.
The company contact information is provided along with a brief description of the filter testing fixture's capabilities.
Dcz50 sample maker corrugated foam board fabric blanket gasket cutter table m...
DCZ50 sample maker corrugated foam board fabric blanket gasket cutter table machine
Pls contact me freely If any question about cutting machine
PDLC Film bus bar Manufacturing
Smart pdlc film manufacturer provides a guide for installing self-adhesive smart film that changes opacity when voltage is applied. The guide outlines six key steps: (1) preparing the film and surface, (2) moving and installing the film, (3) cutting the film to size, (4) adding electrodes, (5) connecting the electrodes, and (6) inspecting and packaging the film. Installation requires both correctly processing the smart film and completing electrical work by a certified electrician.
How to make PDLC film cutting, wiring bus bar
How to cut smart PDLC film? How to Make smart film bus bar?
How to handle it properly, this will help you to get the basic knowledge
AAREAL Machine Catalog
we are the professional manufacture of vibrating screen, vibrating sieve, rotary vibrating screen, round separator, vibro sieve, linear vibrating screen, trommel screen, dewatering screen, airflow screen, probability screen, inline screen, flow-thru screen, test sieve, sieve shaker etc.
Testing/Manufacture/spring compression
This document provides information about a new compact universal testing machine for small spring compression from FEC, an ISO 9001 certified company. The machine has a maximum load capacity of 100 kg and maximum testing length of 100-600 mm. It has features like peak hold, digital or scale elongation measurement, motorized up and down movement, safety switches, overload protection and is designed for easy operation. The machine can be used to test springs, nonwovens, fabrics, yarns and other small products.
Testing/Manufacture/Micro thickness tester
FEC is an ISO 9001 certified company that manufactures and sells world class filter testing equipment from their sales office in New Delhi, India. They produce digital thickness meters that can rapidly and accurately measure the thickness of materials like paper, board, plastics, and foils. The meters use either an add-on optical transducer or a linear variable differential transformer transducer and have push button operation and a digital display. Models offer resolutions of 0.01mm or 0.001mm.
Clirik stone raymond mill by audited supplier
The document summarizes the specifications and features of the Clirik Stone Raymond Mill. It describes 5 models of Raymond mills with capacities ranging from 1-20 t/h and power requirements from 18.5-132 kW. The mills can grind materials to a fineness between 30-425 meshes. Key features include high efficiency, long lifecycles, safety, flexibility in fineness adjustment, and an environmentally friendly design. The document also provides company and contact information for Clirik.
Specification for grinding and polishing of mold surface of injection mold -d...
This document provides specifications for grinding and polishing mold surfaces for injection molds. It discusses preparation such as tool and material selection, workpiece protection, and inspection requirements. It also covers clamping techniques, polishing procedures like cleaning between steps and determining the process, precautions to avoid going over allowances, and uses of an ultrasonic polishing machine including for removing layers and finishing. Self-inspection and protection of the polished surface is emphasized.
Cutting dies - ruler type - CNC
The Ruler Type Cutting Dies are used for cutting of plastic film, paper and rubber samples used for tensile and tear testing (dumbbell, trouser, etc). They are manufactured with a ply backed knife-edge and can be manufactured to suit various international test standards.
Testing/Manufacture/Rockwell digital hardness tester
This document provides contact and technical specification information for a Rockwell Digital Hardness Tester manufactured by FEC. The tester measures hardness on a scale of 4-650 HBW and has a measurement range of 400 micrometers. It features an automatic loading and unloading function, digital display of results on an LCD screen, and magnification ranges from 50x to 100x.
I-COFTEK 3300-aluminum foil test
i-COFTEK 3300 Coefficient of Friction Tester is designed to determine static and dynamic coefficient of friction tests of plastic films, sheets, rubber, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc. Additionally the instrument could be used to test the smoothness of cosmetics, eye drops and other daily chemical products.
Oral thin strip processing
This document describes a mouth dissolving film machine and packing line from Umang Pharmatech. It lists standard and optional features of the machine, which can produce mouth dissolving films at rates from 20,000 to 200,000 strips per day depending on the model. The machine provides mixing, coating, drying, slitting, cutting and individual packaging capabilities in a single integrated system. It has precision controls and recording of process parameters in compliance with regulatory standards.
China supplier limestone raymond mill with ce approved
This document summarizes a limestone Raymond mill product from Shanghai Clirik Machinery Co. Ltd. It describes the mill's specifications including models, capacity, input/output size, power requirements, and applications for processing non-flammable materials. Key advantages are noted as high efficiency, long-lasting parts, safety, fine particle size adjustment, and an environmentally friendly design. After-sales services and shipping details are also provided.
The most complete stamping die information -by dg mf mold components co., ltd
Stamping dies, also known as metal molds, are used to shape metal or non-metal plates by applying pressure. They consist of an upper and lower die assembled from various inserts and standard parts. Stamping die numbers provide information about the die, such as the year produced and whether it is for continuous or single production. Common materials used in stamping include various grades of steel, copper, brass, and aluminum sheets or strips. The material selected must meet requirements for the part's use and stamping process, such as formability and surface quality.
flatbed sign board packaging sample CNC cutting table
flatbed sign board packaging sample CNC cutting table make process of cutting creasing to materials. Make sample and do small production
tel: 0086-13549354183
E-mail: sales02@cutcnccam.com
Skype: trinityhu
MSN: trinityhu@hotmail.com
QQ: 2355895767
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
More Related Content
Similar to Testing/Manufacture/GSM Test Kit
Testing/Manufacture/Gsm
FEC is an ISO 9001 certified company that produces high quality testing equipment including a GSM round cutter and GSM weighing scale. The GSM round cutter uses a drawing action to cut circular samples with smooth edges from a variety of materials up to 5mm thick, including paper, cardboard, film and leather. The GSM weighing scale provides precise, accurate readings from 0.01g to 300g through simple battery operation and a bright LED display. It is designed for laboratory and research use with a chemical resistant pan and air shield cover.
Testing/Manufacture/Filter Cover Plate Run out fixture
This 3 sentence summary provides the key details about a filter testing equipment company:
The document describes FEC, an ISO 9001 certified company that manufactures world class filter testing equipment, including a filter run out fixture that can test filter cover plates and assemblies by changing filter threads on adjustable mandrels using either an analog or digital dial readout.
The company contact information is listed along with a description of the filter run out fixture's capacity to change mounted threads and adjust fixtures up to various thread sizes based on customer requirements.
Testing/Manufacture/Filter Run Out Fixture
This 3 sentence summary provides the key details about a filter testing equipment company:
The document describes FEC, an ISO 9001 certified company that manufactures world class filter testing equipment, including a filter run out fixture that can test filter cover plates and assemblies by changing filter threads on adjustable mandrels using either an analog or digital dial readout.
The company contact information is provided along with a brief description of the filter testing fixture's capabilities.
Dcz50 sample maker corrugated foam board fabric blanket gasket cutter table m...
DCZ50 sample maker corrugated foam board fabric blanket gasket cutter table machine
Pls contact me freely If any question about cutting machine
PDLC Film bus bar Manufacturing
Smart pdlc film manufacturer provides a guide for installing self-adhesive smart film that changes opacity when voltage is applied. The guide outlines six key steps: (1) preparing the film and surface, (2) moving and installing the film, (3) cutting the film to size, (4) adding electrodes, (5) connecting the electrodes, and (6) inspecting and packaging the film. Installation requires both correctly processing the smart film and completing electrical work by a certified electrician.
How to make PDLC film cutting, wiring bus bar
How to cut smart PDLC film? How to Make smart film bus bar?
How to handle it properly, this will help you to get the basic knowledge
AAREAL Machine Catalog
we are the professional manufacture of vibrating screen, vibrating sieve, rotary vibrating screen, round separator, vibro sieve, linear vibrating screen, trommel screen, dewatering screen, airflow screen, probability screen, inline screen, flow-thru screen, test sieve, sieve shaker etc.
Testing/Manufacture/spring compression
This document provides information about a new compact universal testing machine for small spring compression from FEC, an ISO 9001 certified company. The machine has a maximum load capacity of 100 kg and maximum testing length of 100-600 mm. It has features like peak hold, digital or scale elongation measurement, motorized up and down movement, safety switches, overload protection and is designed for easy operation. The machine can be used to test springs, nonwovens, fabrics, yarns and other small products.
Testing/Manufacture/Micro thickness tester
FEC is an ISO 9001 certified company that manufactures and sells world class filter testing equipment from their sales office in New Delhi, India. They produce digital thickness meters that can rapidly and accurately measure the thickness of materials like paper, board, plastics, and foils. The meters use either an add-on optical transducer or a linear variable differential transformer transducer and have push button operation and a digital display. Models offer resolutions of 0.01mm or 0.001mm.
Clirik stone raymond mill by audited supplier
The document summarizes the specifications and features of the Clirik Stone Raymond Mill. It describes 5 models of Raymond mills with capacities ranging from 1-20 t/h and power requirements from 18.5-132 kW. The mills can grind materials to a fineness between 30-425 meshes. Key features include high efficiency, long lifecycles, safety, flexibility in fineness adjustment, and an environmentally friendly design. The document also provides company and contact information for Clirik.
Specification for grinding and polishing of mold surface of injection mold -d...
This document provides specifications for grinding and polishing mold surfaces for injection molds. It discusses preparation such as tool and material selection, workpiece protection, and inspection requirements. It also covers clamping techniques, polishing procedures like cleaning between steps and determining the process, precautions to avoid going over allowances, and uses of an ultrasonic polishing machine including for removing layers and finishing. Self-inspection and protection of the polished surface is emphasized.
Cutting dies - ruler type - CNC
The Ruler Type Cutting Dies are used for cutting of plastic film, paper and rubber samples used for tensile and tear testing (dumbbell, trouser, etc). They are manufactured with a ply backed knife-edge and can be manufactured to suit various international test standards.
Testing/Manufacture/Rockwell digital hardness tester
This document provides contact and technical specification information for a Rockwell Digital Hardness Tester manufactured by FEC. The tester measures hardness on a scale of 4-650 HBW and has a measurement range of 400 micrometers. It features an automatic loading and unloading function, digital display of results on an LCD screen, and magnification ranges from 50x to 100x.
I-COFTEK 3300-aluminum foil test
i-COFTEK 3300 Coefficient of Friction Tester is designed to determine static and dynamic coefficient of friction tests of plastic films, sheets, rubber, paper, paper board, PP woven bags, fabric style, and metal-material belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, etc. Additionally the instrument could be used to test the smoothness of cosmetics, eye drops and other daily chemical products.
Oral thin strip processing
This document describes a mouth dissolving film machine and packing line from Umang Pharmatech. It lists standard and optional features of the machine, which can produce mouth dissolving films at rates from 20,000 to 200,000 strips per day depending on the model. The machine provides mixing, coating, drying, slitting, cutting and individual packaging capabilities in a single integrated system. It has precision controls and recording of process parameters in compliance with regulatory standards.
China supplier limestone raymond mill with ce approved
This document summarizes a limestone Raymond mill product from Shanghai Clirik Machinery Co. Ltd. It describes the mill's specifications including models, capacity, input/output size, power requirements, and applications for processing non-flammable materials. Key advantages are noted as high efficiency, long-lasting parts, safety, fine particle size adjustment, and an environmentally friendly design. After-sales services and shipping details are also provided.
The most complete stamping die information -by dg mf mold components co., ltd
Stamping dies, also known as metal molds, are used to shape metal or non-metal plates by applying pressure. They consist of an upper and lower die assembled from various inserts and standard parts. Stamping die numbers provide information about the die, such as the year produced and whether it is for continuous or single production. Common materials used in stamping include various grades of steel, copper, brass, and aluminum sheets or strips. The material selected must meet requirements for the part's use and stamping process, such as formability and surface quality.
flatbed sign board packaging sample CNC cutting table
flatbed sign board packaging sample CNC cutting table make process of cutting creasing to materials. Make sample and do small production
tel: 0086-13549354183
E-mail: sales02@cutcnccam.com
Skype: trinityhu
MSN: trinityhu@hotmail.com
QQ: 2355895767
Similar to Testing/Manufacture/GSM Test Kit (18)
Testing/Manufacture/Filter Cover Plate Run out fixture
Testing/Manufacture/Filter Cover Plate Run out fixture
Dcz50 sample maker corrugated foam board fabric blanket gasket cutter table m...
Dcz50 sample maker corrugated foam board fabric blanket gasket cutter table m...
Specification for grinding and polishing of mold surface of injection mold -d...
Specification for grinding and polishing of mold surface of injection mold -d...
Testing/Manufacture/Rockwell digital hardness tester
Testing/Manufacture/Rockwell digital hardness tester
China supplier limestone raymond mill with ce approved
China supplier limestone raymond mill with ce approved
The most complete stamping die information -by dg mf mold components co., ltd
The most complete stamping die information -by dg mf mold components co., ltd
flatbed sign board packaging sample CNC cutting table
flatbed sign board packaging sample CNC cutting table
Recently uploaded
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
一比一原版(USF毕业证)旧金山大学毕业证如何办理
原件一模一样【微信：95270640】【旧金山大学毕业证USF学位证成绩单】【微信：95270640】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：95270640】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：95270640】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：95270640】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理旧金山大学毕业证USF学位证毕业证学位证【微信：95270640 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理旧金山大学毕业证毕业证学位证USF学位证【微信：95270640 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Height and depth gauge linear metrology.pdf
Height gauges may also be used to measure the height of an object by using the underside of the scriber as the datum. The datum may be permanently fixed or the height gauge may have provision to adjust the scale, this is done by sliding the scale vertically along the body of the height gauge by turning a fine feed screw at the top of the gauge; then with the scriber set to the same level as the base, the scale can be matched to it. This adjustment allows different scribers or probes to be used, as well as adjusting for any errors in a damaged or resharpened probe.
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Recently uploaded (20)
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
Zener Diode and its V-I Characteristics and Applications
Zener Diode and its V-I Characteristics and Applications
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
2. protection of river banks and bed erosion protection works.ppt
2. protection of river banks and bed erosion protection works.ppt
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Testing/Manufacture/GSM Test Kit
- 1. Catalogue of GSM Round Cutter FEC R World Class Testing Equipments An ISO 9001 Certified Co.
- 2. Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi 110043 (INDIA). Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, Delhi -110059. Cell - 9811478874, 9811938703, 9212912990 E-mail - info@fecproduct.com/ inquiry_fec@yahoo.com Website - www.fecproduct.com FEC GSM kit use a drawing action to cut accurate circular samples with smooth edge. Even difficult material as card board, filter paper, card paper, corrugated sheet, fine knit, thin film, synthetic leather, can be cut conveniently. Use : Put the sample sheet on the rubber pad and help of round cutter move half roundon the sample sheet will found sample for gsm. ?With GSM Cutting pad. ?Circular Sharp cutting edge. ?Mold from aluminum casting with attractive look and work. ?Suitable for paper, card board, filter paper, craft paper, corrugated sheet, fine knit, thin film, synthetic leather, can be cut conveniently. GSM Sample (Round) Cutter ?Precise and accurate reading. ?Simple battery operation. ?LED bright display. ?Specially designed for laboratory & Research use. ?Chemical Resistant weighing pan. ?Air shield cover is some different transparent. ?Least count .01 gm to 300 gms. ?Double display. GSM Weighing Scale