THIS PPT COVERS ABOUT GLASS FUNCTIONAL INGREDIENTS WHICH INCLUDES SILICA ,LIME ,SODA ,POTASHAND LEAD OXIDE AND ITS CLASSIFICATION
CLASSIFICATION INCLUDES SODA LIME GLASS ,BORO SLICATE GLASS AND LEAD GLASS IN BREIF
THIS PPT COVER ABOUT WIND EROSION CONTROLS AND ITS DIFFERENT METHODS
DIFFERENT METHODS ARE :
1.VEGETATIVE MESURES
2 TILLAGE PRACTICES.
3. MECHANICAL MESURES
A. WIND BREAKS
B. SHELTER BELTS
THIS PPT COVERS ABOUT TERRACE AND ITS TYPES
TOPICS COVERED ARE TERRACE TYPES;BROAD BASE, BENCH TERRACE
BENCH TERRACE DESIGN AND TYPES ARE ALSO COVERED IN PPT
Osmotic dehydration is a process that removes water from a food product through a semipermeable membrane into a concentrated solution. It uses a concentrated gradient to drive water removal from the lower concentration product to the higher concentration solution. This partial water removal reduces the load on dryers and enhances the storage life and quality of products by preventing enzymatic and oxidative browning through a mild treatment. Factors like the type and maturity of the product, concentration and temperature of the solution, and duration of the process affect osmotic dehydration.
Bunds are embankment structures constructed across land slopes to obstruct surface runoff. There are two main types: contour bunds and graded bunds. Contour bunds have no longitudinal slope and are suitable for areas with annual rainfall under 600 mm and permeable soils with slopes less than 6%. Graded bunds have a slope to safely dispose of excess runoff and are recommended for high rainfall regions and impermeable soils. The design of bunds considers factors like rainfall, soil type, slope, spacing between bunds, size, length, and area lost due to construction.
THIS PPT COVERS ABOUT SOIL ERODIBILITY.
ALSO COVERS ABOUT DETERMINATION OF ERODIBILITY .IN THIS IT COVERS ABOUT MAJOR 3 METHODS
THEY ARE
1. IN SITU PLOTS
2 MESURING K UNDER A SIMULATED RAINFALL
AND 3 PREDICTING K
THIS PPT COVERS ABOUT EROSIVITY OF RAINFALL ,FACTORS AFFECTING EROSIVITY AND ESTIMATION OF EROSIVITY WHICH IS DONE BY 2 METHODS 1EI METHOD AND KE>25 METHOD.
THIS POWERPOINT COVERS ABOUTMINIMUM GROWTH TEMPERATURE,MAXIMUM GROWTH TEMPERATURE, PSYCHROPHILES MESOPHILES THERMOPHILES AND HYPERTHERMOPHILES.FINALLY IT HAS A DIAGRAM SHOWING DIFFERENT TEMPERATURE RANGES OF MICROORGANISMS
THIS PPT COVER ABOUT WIND EROSION CONTROLS AND ITS DIFFERENT METHODS
DIFFERENT METHODS ARE :
1.VEGETATIVE MESURES
2 TILLAGE PRACTICES.
3. MECHANICAL MESURES
A. WIND BREAKS
B. SHELTER BELTS
THIS PPT COVERS ABOUT TERRACE AND ITS TYPES
TOPICS COVERED ARE TERRACE TYPES;BROAD BASE, BENCH TERRACE
BENCH TERRACE DESIGN AND TYPES ARE ALSO COVERED IN PPT
Osmotic dehydration is a process that removes water from a food product through a semipermeable membrane into a concentrated solution. It uses a concentrated gradient to drive water removal from the lower concentration product to the higher concentration solution. This partial water removal reduces the load on dryers and enhances the storage life and quality of products by preventing enzymatic and oxidative browning through a mild treatment. Factors like the type and maturity of the product, concentration and temperature of the solution, and duration of the process affect osmotic dehydration.
Bunds are embankment structures constructed across land slopes to obstruct surface runoff. There are two main types: contour bunds and graded bunds. Contour bunds have no longitudinal slope and are suitable for areas with annual rainfall under 600 mm and permeable soils with slopes less than 6%. Graded bunds have a slope to safely dispose of excess runoff and are recommended for high rainfall regions and impermeable soils. The design of bunds considers factors like rainfall, soil type, slope, spacing between bunds, size, length, and area lost due to construction.
THIS PPT COVERS ABOUT SOIL ERODIBILITY.
ALSO COVERS ABOUT DETERMINATION OF ERODIBILITY .IN THIS IT COVERS ABOUT MAJOR 3 METHODS
THEY ARE
1. IN SITU PLOTS
2 MESURING K UNDER A SIMULATED RAINFALL
AND 3 PREDICTING K
THIS PPT COVERS ABOUT EROSIVITY OF RAINFALL ,FACTORS AFFECTING EROSIVITY AND ESTIMATION OF EROSIVITY WHICH IS DONE BY 2 METHODS 1EI METHOD AND KE>25 METHOD.
THIS POWERPOINT COVERS ABOUTMINIMUM GROWTH TEMPERATURE,MAXIMUM GROWTH TEMPERATURE, PSYCHROPHILES MESOPHILES THERMOPHILES AND HYPERTHERMOPHILES.FINALLY IT HAS A DIAGRAM SHOWING DIFFERENT TEMPERATURE RANGES OF MICROORGANISMS
THIS PPT COVERS ABOUT FREEZING,FREEZING PROCESS OF FOODS,ADVANTAGES OF FREEZING,SLOW AND FAST FREEZING,AND TYPES OF FREEZERS:AIR BLAST FREEZERS,CRYOGENIC FREEZER AND PLATE FREEZER
COVERS ABOUT
BRICKS,COMPARISION B/W BRICKS AND STONES,SIZE,WEIGHT AND COLOUR OF BRICKS,COMPOSITION OF BRICKS,HARMFUL INGREDIENTS FOR BRICKS,MANUFACTURING OF BRICKS:PREPARATION OF CLAY,MOULDING,DRYING,BURNING OF BRICKS,CLASSIFICATION OF BRICKS:UNBURNT AND BURNT
BURNT BRICK CLASSIFICATION:FIRST CLASS, SECOND CLASS, THIRD CLASS ,FOURTH CLASS BRICKS
TEST ON BRICKS.
COVERS ABOUT:
BLANCHING,FACTORS AFFECTING BLANCHING TIME,OBJECTIVES OF BLANCHING, METHODS OF BLANCHING, EQUIPMENT OF BLANCHING, STEAM BLANCHER, HOT WATER BLANCHER,ITS MAIN DESIGNS,REEL BLANCHER,PIPE BLANCHER,INDIVIDUAL QUICK BLANCHING,EFFECTS ON FOOD BY BLANCHING.
PEELING AND ITS TYPES ARE BEEN COVERED IN THIS TOPIC
IT COVERS ABOUT :
PEELING BY HAND,MECHANICAL PEELING,ABRASIVE PEELING,FLAME PEELING,HOT WATER PEELING,FLASH STEAM PEELING,LYE PEELING
CLASSIFICATION OF ROCKS:
GEOLOGICAL:IGNEOUS,SEDIMENTRY,METAMORPHIC ROCKS
PHYSICAL:STRATIFIED,UNSTRATIFIED,FOLIATED.
CHEMICAL:SILICEOUS,CALCAREOUS,AGRILLACEOUS ROCKS.
CHARACTERSTICS OF STONES AND USES OF STONES
This document discusses different agronomic measures for controlling water erosion, including contour cropping, strip cropping, and mulching. Contour cropping involves planting crops across slopes to protect topsoil and induce more infiltration, and is suitable for slopes between 2-10%. Strip cropping grows crops in narrow strips across land slopes to check surface runoff and force infiltration. Mulching covers soil with plant residues or plastic sheets to minimize rain splash, reduce evaporation, control weeds, and prevent sheet and rill erosion. Different types of mulching include synthetic, petroleum, conventional, stone, and organic mulching.
Water erosion is caused by liquid flowing water and solid glaciers. It occurs through hydraulic action, abrasion, attrition, solution, and transportation of detached soil particles. The main forms of water erosion are splash erosion, sheet erosion, rill erosion, gully erosion, and stream bank erosion. Gullies can be classified based on size, shape, and the development of branches. Gully development occurs in stages from formation to stabilization as water flow scours the soil channel over time.
This document discusses soil and water conservation engineering. It notes that soil erosion is a major problem in India, with over 175 million hectares of land critically degraded or severely eroded. Proper soil conservation is important for maintaining agricultural productivity. The document then discusses the causes and types of soil erosion, including water erosion, wind erosion, glacial erosion, and gravitational erosion. It also outlines factors that affect the rate of soil erosion, such as climate, topography, soil properties, vegetation cover, and human practices like deforestation and overgrazing. The overall goal of soil conservation is to control soil erosion and maintain soil productivity for agriculture.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
THIS PPT COVERS ABOUT FREEZING,FREEZING PROCESS OF FOODS,ADVANTAGES OF FREEZING,SLOW AND FAST FREEZING,AND TYPES OF FREEZERS:AIR BLAST FREEZERS,CRYOGENIC FREEZER AND PLATE FREEZER
COVERS ABOUT
BRICKS,COMPARISION B/W BRICKS AND STONES,SIZE,WEIGHT AND COLOUR OF BRICKS,COMPOSITION OF BRICKS,HARMFUL INGREDIENTS FOR BRICKS,MANUFACTURING OF BRICKS:PREPARATION OF CLAY,MOULDING,DRYING,BURNING OF BRICKS,CLASSIFICATION OF BRICKS:UNBURNT AND BURNT
BURNT BRICK CLASSIFICATION:FIRST CLASS, SECOND CLASS, THIRD CLASS ,FOURTH CLASS BRICKS
TEST ON BRICKS.
COVERS ABOUT:
BLANCHING,FACTORS AFFECTING BLANCHING TIME,OBJECTIVES OF BLANCHING, METHODS OF BLANCHING, EQUIPMENT OF BLANCHING, STEAM BLANCHER, HOT WATER BLANCHER,ITS MAIN DESIGNS,REEL BLANCHER,PIPE BLANCHER,INDIVIDUAL QUICK BLANCHING,EFFECTS ON FOOD BY BLANCHING.
PEELING AND ITS TYPES ARE BEEN COVERED IN THIS TOPIC
IT COVERS ABOUT :
PEELING BY HAND,MECHANICAL PEELING,ABRASIVE PEELING,FLAME PEELING,HOT WATER PEELING,FLASH STEAM PEELING,LYE PEELING
CLASSIFICATION OF ROCKS:
GEOLOGICAL:IGNEOUS,SEDIMENTRY,METAMORPHIC ROCKS
PHYSICAL:STRATIFIED,UNSTRATIFIED,FOLIATED.
CHEMICAL:SILICEOUS,CALCAREOUS,AGRILLACEOUS ROCKS.
CHARACTERSTICS OF STONES AND USES OF STONES
This document discusses different agronomic measures for controlling water erosion, including contour cropping, strip cropping, and mulching. Contour cropping involves planting crops across slopes to protect topsoil and induce more infiltration, and is suitable for slopes between 2-10%. Strip cropping grows crops in narrow strips across land slopes to check surface runoff and force infiltration. Mulching covers soil with plant residues or plastic sheets to minimize rain splash, reduce evaporation, control weeds, and prevent sheet and rill erosion. Different types of mulching include synthetic, petroleum, conventional, stone, and organic mulching.
Water erosion is caused by liquid flowing water and solid glaciers. It occurs through hydraulic action, abrasion, attrition, solution, and transportation of detached soil particles. The main forms of water erosion are splash erosion, sheet erosion, rill erosion, gully erosion, and stream bank erosion. Gullies can be classified based on size, shape, and the development of branches. Gully development occurs in stages from formation to stabilization as water flow scours the soil channel over time.
This document discusses soil and water conservation engineering. It notes that soil erosion is a major problem in India, with over 175 million hectares of land critically degraded or severely eroded. Proper soil conservation is important for maintaining agricultural productivity. The document then discusses the causes and types of soil erosion, including water erosion, wind erosion, glacial erosion, and gravitational erosion. It also outlines factors that affect the rate of soil erosion, such as climate, topography, soil properties, vegetation cover, and human practices like deforestation and overgrazing. The overall goal of soil conservation is to control soil erosion and maintain soil productivity for agriculture.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Low power architecture of logic gates using adiabatic techniquesnooriasukmaningtyas
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.