FR Polyminium 201 (Rev. 6)
•
0 likes•191 views
This document provides product information for FR POLYMINIUM 201, a fire-rated roofing material produced by San Miguel Yamamura Woven Products. The material consists of an aluminum foil layer laminated between polyethylene tie layers and a woven fabric. Specifications are provided for roll dimensions, fire performance classification, tensile strength, bursting strength, puncture resistance, and system thermal resistance. Testing methods are referenced from standards organizations. Construction details note air gap parameters used in thermal resistance testing and warnings about potential corrosion affecting properties in certain conditions.
Report
Share
Report
Share
Download to read offline
![San Miguel Yamamura Woven Products Sdn. Bhd.
[Formerly known as San Miguel Woven Products Sdn. Bhd.]
A Subsidiary of San Miguel Yamamura Packaging International Ltd.
Lots 9 & 10, Jalan Usaha 4, Ayer Keroh Industrial Estate, 75450 Melaka, Malaysia.
Tel : 06-2323898 (5 lines) Fax : 06-2329916 / 06-2321437
PRODUCT DATA SHEET
Customer Name : P&P PLASTICS PTY. LTD.
Product Type : NFR 1 – AL
Product Name : FR POLYMINIUM 201
Product Design : AL / PE TIE LAYER / HDPE WOVEN FABRIC
CHARACTERISTIC TEST METHOD UNIT (SI) SPECIFICATION
LaminationRollSpecifications
Width In-house mm 1250 ± 5
Length In-house m ≥ 36
Grammage In-house g/m2 80 ± 10%
Mass Content In-house kg/roll 3.95 ± 10%
Resistance to Dry Delamination
at elevated ambient temperatures
SANS 1381-4:2013 - No delamination
Resistance to
Corrosion
Wet delamination
at elevated ambient temperatures
SANS 1381-4:2013 - No corrosion
No delamination
Shrinkage
MD
CD
SANS 1381-4:2013 % < 1.5
< 1.5
Emissivity SANS 1381-4:2013 Index ≤ 0.05
Water Vapour Permeance ASTM E96 g/(s.MN) ≤ 0.002
Fire Performance Classification
SANS 428
(SANS 10177, PARTS
5, 9, 10)
Class B/B3/4
Tensile Breaking Strength
MD
CD
SANS 1381-4:2013 kN/m > 4
> 4
Bursting Strength ISO 2758 kPa > 500
Puncture Resistance SANS 456 mJ > 500
Edge Tear Resistance
MD
CD
SANS 1381-4:2013 N > 100
> 100
System Thermal Resistance
White side facing hot plate
Foil side facing hot plate
With two air gaps – heat flow down
ISO 8301 : 1991 m2K/W > 0.8
> 0.8
Rev. 6 (29-10-2014) – B14NN00](https://image.slidesharecdn.com/4b60a077-0575-4ab0-85da-5d2be3092809-150706071854-lva1-app6891/85/FR-Polyminium-201-Rev-6-1-320.jpg)
![San Miguel Yamamura Woven Products Sdn. Bhd.
[Formerly known as San Miguel Woven Products Sdn. Bhd.]
A Subsidiary of San Miguel Yamamura Packaging International Ltd.
Lots 9 & 10, Jalan Usaha 4, Ayer Keroh Industrial Estate, 75450 Melaka, Malaysia.
Tel : 06-2323898 (5 lines) Fax : 06-2329916 / 06-2321437
PRODUCT DATA SHEET
CONSTRUCTION OF FR POLYMINIUM 201 (SANS 1381-4 CLASS B)
Specific Test Conditions For System Thermal Resistance:
Parameter Unit Setting
Air Gap at Hot Side
Air space
Temperature
mm
°C
40
50
Air Gap at Cold Side
Air space
Temperature
mm
°C
60
10
Warnings
There are special circumstances where unless special precautions are taken, the atmosphere in the roof can cause corrosion of
the laminate that will directly affect its emissivity and therefore its thermal insulation properties. Air space is vital between
insulation foil and battens.
Under certain circumstances the aluminum foil may not be resistance to tarnishing and hence its reflective and emissive
properties may be affected. Such conditions may include condensation, acidic vapors of sea salts and mists of corrosive liquids.
Rev. 6 (29-10-2014) – B14NN00
Remark : PE - Polyethylene
Aluminium Foil, 16-17 g/m²
PE Tie Layer, 20-25 g/m²
Woven Fabric, 40-48 g/m²](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
FR Polyminium 202 (Rev. 5)
This document provides product data and specifications for FR POLYMINIUM 202, a laminated insulation material produced by San Miguel Yamamura Woven Products Sdn. Bhd. The material consists of aluminum foil laminated with polyethylene tie layers and a woven fabric core. Key specifications include a width of 1250mm, grammage of 117g/m2, tensile breaking strength over 7.2kN/m, bursting strength over 700kPa, and steady-state thermal resistance of at least 1.80m2K/W. Warnings are also provided about ensuring proper spacing and preventing condensation or exposure to corrosive elements which could impact the material's emissivity over time.
Technical data sheet bitumen emulsion rs 57%
This document provides information on Emulsion Bitumen Rapid Setting 57%-K1-60, including:
1) It is an asphalt emulsion where asphalt is dispersed in water using an emulsifier, allowing the asphalt droplets to remain suspended.
2) It has properties including 57% residue by evaporation and positive particle charge.
3) Its main applications are for surface dressing, tack coats, slurry sealing, and cold mixing in road construction and maintenance.
4) Safety information notes it is flammable and should avoid skin and eye contact, and inhalation risks.
Pvc formulation perstorp_eng 2014
This document summarizes Perstorp's investments in new plasticizers. Perstorp is making its largest investment in history to produce two new plasticizers, EmolteneTM 100 and PevalenTM. EmolteneTM 100 is an established C10 plasticizer that provides durability for applications like cables and films. PevalenTM is an innovative polyolester plasticizer that is highly efficient while having low volatility, ensuring consistent properties. The new production capacity of 150,000 MT per year will strengthen Perstorp's platform and allow them to offer competitive and sustainable plasticizer products.
Relink 1300
Relink 1300 is a double sided adhesive tape with a removable side and a permanent adhering side. The removable side provides good initial repositionability and clean peel removability. The permanent side is a modified acrylic adhesive that provides a good balance of adhesion and cohesion, with an adhesion level of 15 on steel. The tape has a polyester carrier film thickness of 0.023 mm sandwiched between the different adhesive coatings on either side.
Foamlink 1607 h+
Foamlink 1607 H+ is a double coated foam tape that uses a high density, closed cell polyolefin foam carrier. It is well suited for bonding to uneven and rough surfaces due to the adaptable PE foam. The modified acrylate adhesive has a high initial tack and bonds well to low-energy materials like plastics and varnishes. It is also suitable for outdoor use due to the high age resistance of the acrylate adhesive and PE foam. In addition to its bonding properties, it provides cushioning and insulation.
Technical data sheet bitumen emulsion rs 50%
This document provides information on Emulsion Bitumen Rapid Setting 50%-RS-1K, including:
1) It is an asphalt emulsion where asphalt is dispersed in water with an emulsifier, allowing the asphalt droplets to remain suspended.
2) It has properties suitable for applications like surface dressing, tack coats, and slurry sealing.
3) Safety information is provided, stating it is flammable and skin and eye contact can cause irritation.
Technical data sheet bitumen emulsion ms 57%
This technical data sheet provides information on Emulsion Bitumen Medium Setting 57%-K2. It is an asphalt emulsion where asphalt is milled into microscopic particles and suspended in water using an emulsifier. The emulsion has applications in surface dressing, tack coats, slurry sealing, and cold mixing. It has properties such as 57% residue by evaporation and positive particle charge. Safety precautions are outlined such as keeping it away from fire and cleaning skin contact with soap and water.
Hot melt bonding - Selector guide
This document discusses thermoplastic polyamide adhesives from Huntsman Advanced Materials called Euremelt. Euremelt hot melt adhesives are used in a variety of industries for joining, fixing, sealing or protecting substrates. They are easy to handle and process, requiring no solvents, curing, or mixing. The document provides details on different Euremelt product types including their softening points, viscosities, and typical applications for joining various substrates like metals, plastics, and porous materials. Technical support is available to help select the appropriate Euremelt product and processing conditions.
Recommended
FR Polyminium 202 (Rev. 5)
This document provides product data and specifications for FR POLYMINIUM 202, a laminated insulation material produced by San Miguel Yamamura Woven Products Sdn. Bhd. The material consists of aluminum foil laminated with polyethylene tie layers and a woven fabric core. Key specifications include a width of 1250mm, grammage of 117g/m2, tensile breaking strength over 7.2kN/m, bursting strength over 700kPa, and steady-state thermal resistance of at least 1.80m2K/W. Warnings are also provided about ensuring proper spacing and preventing condensation or exposure to corrosive elements which could impact the material's emissivity over time.
Technical data sheet bitumen emulsion rs 57%
This document provides information on Emulsion Bitumen Rapid Setting 57%-K1-60, including:
1) It is an asphalt emulsion where asphalt is dispersed in water using an emulsifier, allowing the asphalt droplets to remain suspended.
2) It has properties including 57% residue by evaporation and positive particle charge.
3) Its main applications are for surface dressing, tack coats, slurry sealing, and cold mixing in road construction and maintenance.
4) Safety information notes it is flammable and should avoid skin and eye contact, and inhalation risks.
Pvc formulation perstorp_eng 2014
This document summarizes Perstorp's investments in new plasticizers. Perstorp is making its largest investment in history to produce two new plasticizers, EmolteneTM 100 and PevalenTM. EmolteneTM 100 is an established C10 plasticizer that provides durability for applications like cables and films. PevalenTM is an innovative polyolester plasticizer that is highly efficient while having low volatility, ensuring consistent properties. The new production capacity of 150,000 MT per year will strengthen Perstorp's platform and allow them to offer competitive and sustainable plasticizer products.
Relink 1300
Relink 1300 is a double sided adhesive tape with a removable side and a permanent adhering side. The removable side provides good initial repositionability and clean peel removability. The permanent side is a modified acrylic adhesive that provides a good balance of adhesion and cohesion, with an adhesion level of 15 on steel. The tape has a polyester carrier film thickness of 0.023 mm sandwiched between the different adhesive coatings on either side.
Foamlink 1607 h+
Foamlink 1607 H+ is a double coated foam tape that uses a high density, closed cell polyolefin foam carrier. It is well suited for bonding to uneven and rough surfaces due to the adaptable PE foam. The modified acrylate adhesive has a high initial tack and bonds well to low-energy materials like plastics and varnishes. It is also suitable for outdoor use due to the high age resistance of the acrylate adhesive and PE foam. In addition to its bonding properties, it provides cushioning and insulation.
Technical data sheet bitumen emulsion rs 50%
This document provides information on Emulsion Bitumen Rapid Setting 50%-RS-1K, including:
1) It is an asphalt emulsion where asphalt is dispersed in water with an emulsifier, allowing the asphalt droplets to remain suspended.
2) It has properties suitable for applications like surface dressing, tack coats, and slurry sealing.
3) Safety information is provided, stating it is flammable and skin and eye contact can cause irritation.
Technical data sheet bitumen emulsion ms 57%
This technical data sheet provides information on Emulsion Bitumen Medium Setting 57%-K2. It is an asphalt emulsion where asphalt is milled into microscopic particles and suspended in water using an emulsifier. The emulsion has applications in surface dressing, tack coats, slurry sealing, and cold mixing. It has properties such as 57% residue by evaporation and positive particle charge. Safety precautions are outlined such as keeping it away from fire and cleaning skin contact with soap and water.
Hot melt bonding - Selector guide
This document discusses thermoplastic polyamide adhesives from Huntsman Advanced Materials called Euremelt. Euremelt hot melt adhesives are used in a variety of industries for joining, fixing, sealing or protecting substrates. They are easy to handle and process, requiring no solvents, curing, or mixing. The document provides details on different Euremelt product types including their softening points, viscosities, and typical applications for joining various substrates like metals, plastics, and porous materials. Technical support is available to help select the appropriate Euremelt product and processing conditions.
Shurtape232 Production Grade Packaging Tape
Cold environment, production Grade, hot melt bopp film packaging tape.
TYPICAL APPLICATIONS
• For manual (hand rolls) or automatic (machine rolls) case sealing
• Recommended for packaging applications in cold temperature environments
such as food processing and packaging facilities
• Cold weather moving/storage and unheated warehouses
ADVANTAGES AND BENEFITS
• Applicable in temperatures of 20°F to 75°F
• Economical, high performance in service temperatures of 0°F to -20°F
• Aggressive, high tack adhesive produces a better initial bond and continuous holding power
Prolink 1200le
ProLINK 1200 LE is a high performance transparent transfer tape designed for heavy duty applications. It has a highly crosslinked adhesive that provides excellent bonding strength to a variety of materials like metals and plastics. The thick adhesive layer allows it to fill gaps and bond uneven surfaces. Over time, the bonding strength increases, guaranteeing excellent bonding quality.
Flexlink 640 r+
FlexLINK 640 R+ is a high performance adhesive tape made of a syntactic white acrylate foam core and adhesive layer. It is suitable for bonding difficult surfaces like varnish or plastics to rough surfaces. The adhesive provides good tack at low temperatures and on delicate surfaces. Tensions in the bond are balanced by the rheological properties of the foam core, and bonding stability increases over time. In addition to bonding, it provides cushioning and insulation.
Polyurethane adhesives
Polyurethane Adhesives offer versatile curing times at room and elevated temperatures. They can be applied either manually or using the dispensing equipment specially designed for these adhesives.
K2 Mega Mirror 2.0
This document provides instructions for using a 2-component rear-view mirror adhesive. It has an effective formula that permanently repairs mirrors by adhering metal and plastic to glass or other hard surfaces. The user applies the adhesive to the mirror handle and activator to the glass, presses them together for 60 seconds, and allows 15 minutes to cure before use. The mirror should be fully hardened after 24 hours. The document also lists related cleaning products for car windows.
Otter Membership briefing
Welcome to Otter – Premium Supply & Services! Proudly 100% Malaysian-made formulator, manufacturer, and supplier of our very own environmentally-friendly Leather, Car, Wood, and Stone Care premium quality products and services. Otter’s range of wood and stone care products have been fully formulated and produced locally since 1998, and today, we have expanded our range of products to include car and leather care products with technology adapted from Germany. Trust Otter to protect and breathe new life into your prized Leather, Car, Wood and Stone products again. We truly look forward to be in service to you!
Profile
The document is an introduction letter from a firm that produces synthetic surfaces, interior decor products, safety and security products, and general supplies. They mention being authorized converters of 3M safety and security products and importers of chemicals for synthetic surfaces. They highlight 12 years in business serving leading institutions and a focus on quality and economy in serving clients.
Mercedes-Benz Parramatta Protection Program by Permagard Automotive Australasia
The document describes the Permagard Protection Program offered by Mercedes-Benz Parramatta. The program protects vehicles through a coating called Permagard that chemically bonds to the paint to prevent fading, staining, and damage from UV rays, acid rain, tree sap and other contaminants. It also protects interiors through an invisible treatment that forms a flexible barrier on leather, fabric and carpet to prevent stains and make surfaces easier to clean. Permagard is a global leader in paint protection and their technology was developed for aerospace then adapted for vehicles to provide maximum protection for automotive paint and interiors.
Polyurethane Adhesives - Parson Adhesives
Polyurethane adhesives are those glues that are made of urethane polymers with chemical based of isocyanate group, Parson Adhesives provide a quality product for the different industries like, manufacturing and repair.
Ultra tech brochure jultra
This document describes the Ultra Tech series of protective gloves from Ultra Protection. The Ultra Tech series offers ultra fit, comfort, and protection for various industries. It provides different materials like nitrile, polyurethane, latex, and HPT polymers on shells made of nylon, Kevlar, and Dyneema. It lists various glove models with their materials, gauges, sizes, and CE scores to suit different industry applications.
Adchem Presentation 2014
Adchem has been in business for 50 years, providing adhesive tape systems and products. They offer a wide range of adhesive technologies and specialty coatings for applications in automotive, construction, foam fabrication, graphics, industrial, medical, sound and vibration damping, and transportation industries. Adchem has experience in areas like automotive interior/exterior applications, electronics/semiconductors, fenestration/construction, medical, graphics, industrial, and sound attenuation/vibration damping. They are a leading manufacturer of adhesive tapes for the automotive industry.
Foamlink 1102 h+
Foamlink 1102 H+ is a double sided foam tape made of high density closed cell polyolefin foam and acrylate adhesive. It is suitable for bonding rough and uneven surfaces due to the foam's adaption capacity. The adhesive offers high tack on a variety of materials including glass, metal, plastics and varnishes. The tape has a thickness of 1.1mm without the liner and can be used between -40°C to +90°C short term.
Catalogue of products for the rubber industry
This document provides information on products from Repsol for the rubber industry, including:
1. Extender oils called EXTENSOIL that are used to reduce viscosity and improve properties during rubber processing. Repsol offers paraffinic and aromatic oils.
2. Anti-ozone waxes called REDEZON that are used to protect rubber parts from ozone attack. REDEZON waxes are tailored to customer needs and provide maximum protection.
3. Repsol has production centers in Spain, research laboratories, and specialized staff to develop customized rubber products meeting legal standards and customer specifications.
aerosol-tds
HumiSeal 1A33 Aerosol is a fast drying, clear urethane conformal coating intended for use on printed circuit assemblies. It is dispensed from aerosol cans using an environmentally safe propellant and contains a UV tracer for inspection. The coating has a recommended thickness of 25-75 microns and dries fully in 30 days at room temperature. It provides protection from thermal shock, moisture, insulation and dielectric strength. The document provides information on the coating's properties and recommended application procedures.
Construction chemical safety uses and hazard
The document provides information on various construction chemicals including their names, chemical substances, physical properties, uses in construction, hazards, and safe use practices. Specifically, it discusses tile grout, silicone sealant, super plasticizer, gypsum powder, cement, glass fiber, formaldehyde, PVC solvent cement, flame retardants, and lead. For each chemical, it summarizes the key components, applications, potential health risks, and safety precautions when handling the materials.
asad latest cv (1)
This document provides a summary of Asad Najeeb's work experience and qualifications. Asad Najeeb has over 5 years of experience as a Field Operator at Pak-Arab Refinery Limited and National Refinery Limited. He has technical training in HSE management, permit to work, firefighting and is an ERT member. His responsibilities as a Field Operator include overseeing units like the Asphalt Air Blowing Unit and various distillation, extraction and dewaxing units. He also has experience with shutdowns and startups. Asad Najeeb holds a D.A.E in Petroleum and has computer skills including MS Office and troubleshooting.
Anaerobic Adhesives by Parson
Parson Adhesives is a manufacturer and supplier of the quality adhesives worldwide. Anaerobic Adhesives is one of its best quality product for the industrial and engineering applications.
Foamlink 5003 h+
FoamLink 5003 H+ is a soft, flexible and compressible foamtape made of polyolefine foam with good adhesion to steel and cohesion even at high temperatures. It has a yellow siliconized paper liner and a layer of tackified polyacrylate adhesive on both sides coating the polyolefine foam carrier that is approximately 5mm thick without the liner. The tape has a service temperature range of -40°C to +70°C and can be stored for up to 12 months.
Netlink 90 hx_pet
NetLINK 90 HX is a scrim-reinforced, double-sided adhesive tape that provides dimensional stability for bonding rough or structured substrates. It has high adhesion to materials like steel, aluminum, glass and PMMA. The scrim reinforcement allows the tape to maintain its shape during application while still conforming to surfaces. NetLINK 90 HX is suitable for laminating, mounting and fixing applications where dimensional stability is needed. It has a service temperature range of -40°C to 80°C and can be stored for 12 months at around 20°C with 50% relative humidity.
Epibond® 100 A/B - Flyer
This document provides information on Epibond® 100 A/B, a two-component, extrudable, heat curing epoxy structural adhesive designed for aerospace applications requiring high heat resistance and retention of strength. It is characterized by high lap shear strength, a glass transition temperature above 120°C, and service temperatures up to 150°C. The adhesive spreads easily, has a long working time, and its moderate cure cycle involves heating to 65°C for 1 hour then 95°C for 5 hours. It bonds composite and metal substrates commonly used in aerospace and maintains high strength values at elevated temperatures.
00 7465
This 4-page document provides information on a two-component, high build micaceous iron oxide pigmented polyamide cured recoatable epoxy coating. The coating is suitable for protecting steel and concrete structures exposed to atmospheric, land, or marine conditions. It has good adhesion, flexibility, chemical and heat resistance, and can be applied by airless spray or brush. The document provides details on product specifications, application instructions, and safety precautions.
Reinforced EPDM Membranes
- Carlisle manufactures reinforced EPDM roof membranes in thicknesses of 45, 60, and 75 mils. The membranes are internally reinforced with polyester scrim to provide puncture and tear resistance.
- Key benefits of Carlisle's Sure-Tough reinforced EPDM membranes include excellent weathering resistance, seamless sheets that are UL classified, and industry-leading warranties of up to 30 years.
- Carlisle's Factory-Applied Tape seam technology results in reliable seams with greater strength through a quality-controlled application process in the factory.
More Related Content
What's hot
Shurtape232 Production Grade Packaging Tape
Cold environment, production Grade, hot melt bopp film packaging tape.
TYPICAL APPLICATIONS
• For manual (hand rolls) or automatic (machine rolls) case sealing
• Recommended for packaging applications in cold temperature environments
such as food processing and packaging facilities
• Cold weather moving/storage and unheated warehouses
ADVANTAGES AND BENEFITS
• Applicable in temperatures of 20°F to 75°F
• Economical, high performance in service temperatures of 0°F to -20°F
• Aggressive, high tack adhesive produces a better initial bond and continuous holding power
Prolink 1200le
ProLINK 1200 LE is a high performance transparent transfer tape designed for heavy duty applications. It has a highly crosslinked adhesive that provides excellent bonding strength to a variety of materials like metals and plastics. The thick adhesive layer allows it to fill gaps and bond uneven surfaces. Over time, the bonding strength increases, guaranteeing excellent bonding quality.
Flexlink 640 r+
FlexLINK 640 R+ is a high performance adhesive tape made of a syntactic white acrylate foam core and adhesive layer. It is suitable for bonding difficult surfaces like varnish or plastics to rough surfaces. The adhesive provides good tack at low temperatures and on delicate surfaces. Tensions in the bond are balanced by the rheological properties of the foam core, and bonding stability increases over time. In addition to bonding, it provides cushioning and insulation.
Polyurethane adhesives
Polyurethane Adhesives offer versatile curing times at room and elevated temperatures. They can be applied either manually or using the dispensing equipment specially designed for these adhesives.
K2 Mega Mirror 2.0
This document provides instructions for using a 2-component rear-view mirror adhesive. It has an effective formula that permanently repairs mirrors by adhering metal and plastic to glass or other hard surfaces. The user applies the adhesive to the mirror handle and activator to the glass, presses them together for 60 seconds, and allows 15 minutes to cure before use. The mirror should be fully hardened after 24 hours. The document also lists related cleaning products for car windows.
Otter Membership briefing
Welcome to Otter – Premium Supply & Services! Proudly 100% Malaysian-made formulator, manufacturer, and supplier of our very own environmentally-friendly Leather, Car, Wood, and Stone Care premium quality products and services. Otter’s range of wood and stone care products have been fully formulated and produced locally since 1998, and today, we have expanded our range of products to include car and leather care products with technology adapted from Germany. Trust Otter to protect and breathe new life into your prized Leather, Car, Wood and Stone products again. We truly look forward to be in service to you!
Profile
The document is an introduction letter from a firm that produces synthetic surfaces, interior decor products, safety and security products, and general supplies. They mention being authorized converters of 3M safety and security products and importers of chemicals for synthetic surfaces. They highlight 12 years in business serving leading institutions and a focus on quality and economy in serving clients.
Mercedes-Benz Parramatta Protection Program by Permagard Automotive Australasia
The document describes the Permagard Protection Program offered by Mercedes-Benz Parramatta. The program protects vehicles through a coating called Permagard that chemically bonds to the paint to prevent fading, staining, and damage from UV rays, acid rain, tree sap and other contaminants. It also protects interiors through an invisible treatment that forms a flexible barrier on leather, fabric and carpet to prevent stains and make surfaces easier to clean. Permagard is a global leader in paint protection and their technology was developed for aerospace then adapted for vehicles to provide maximum protection for automotive paint and interiors.
Polyurethane Adhesives - Parson Adhesives
Polyurethane adhesives are those glues that are made of urethane polymers with chemical based of isocyanate group, Parson Adhesives provide a quality product for the different industries like, manufacturing and repair.
Ultra tech brochure jultra
This document describes the Ultra Tech series of protective gloves from Ultra Protection. The Ultra Tech series offers ultra fit, comfort, and protection for various industries. It provides different materials like nitrile, polyurethane, latex, and HPT polymers on shells made of nylon, Kevlar, and Dyneema. It lists various glove models with their materials, gauges, sizes, and CE scores to suit different industry applications.
Adchem Presentation 2014
Adchem has been in business for 50 years, providing adhesive tape systems and products. They offer a wide range of adhesive technologies and specialty coatings for applications in automotive, construction, foam fabrication, graphics, industrial, medical, sound and vibration damping, and transportation industries. Adchem has experience in areas like automotive interior/exterior applications, electronics/semiconductors, fenestration/construction, medical, graphics, industrial, and sound attenuation/vibration damping. They are a leading manufacturer of adhesive tapes for the automotive industry.
Foamlink 1102 h+
Foamlink 1102 H+ is a double sided foam tape made of high density closed cell polyolefin foam and acrylate adhesive. It is suitable for bonding rough and uneven surfaces due to the foam's adaption capacity. The adhesive offers high tack on a variety of materials including glass, metal, plastics and varnishes. The tape has a thickness of 1.1mm without the liner and can be used between -40°C to +90°C short term.
Catalogue of products for the rubber industry
This document provides information on products from Repsol for the rubber industry, including:
1. Extender oils called EXTENSOIL that are used to reduce viscosity and improve properties during rubber processing. Repsol offers paraffinic and aromatic oils.
2. Anti-ozone waxes called REDEZON that are used to protect rubber parts from ozone attack. REDEZON waxes are tailored to customer needs and provide maximum protection.
3. Repsol has production centers in Spain, research laboratories, and specialized staff to develop customized rubber products meeting legal standards and customer specifications.
aerosol-tds
HumiSeal 1A33 Aerosol is a fast drying, clear urethane conformal coating intended for use on printed circuit assemblies. It is dispensed from aerosol cans using an environmentally safe propellant and contains a UV tracer for inspection. The coating has a recommended thickness of 25-75 microns and dries fully in 30 days at room temperature. It provides protection from thermal shock, moisture, insulation and dielectric strength. The document provides information on the coating's properties and recommended application procedures.
Construction chemical safety uses and hazard
The document provides information on various construction chemicals including their names, chemical substances, physical properties, uses in construction, hazards, and safe use practices. Specifically, it discusses tile grout, silicone sealant, super plasticizer, gypsum powder, cement, glass fiber, formaldehyde, PVC solvent cement, flame retardants, and lead. For each chemical, it summarizes the key components, applications, potential health risks, and safety precautions when handling the materials.
asad latest cv (1)
This document provides a summary of Asad Najeeb's work experience and qualifications. Asad Najeeb has over 5 years of experience as a Field Operator at Pak-Arab Refinery Limited and National Refinery Limited. He has technical training in HSE management, permit to work, firefighting and is an ERT member. His responsibilities as a Field Operator include overseeing units like the Asphalt Air Blowing Unit and various distillation, extraction and dewaxing units. He also has experience with shutdowns and startups. Asad Najeeb holds a D.A.E in Petroleum and has computer skills including MS Office and troubleshooting.
Anaerobic Adhesives by Parson
Parson Adhesives is a manufacturer and supplier of the quality adhesives worldwide. Anaerobic Adhesives is one of its best quality product for the industrial and engineering applications.
Foamlink 5003 h+
FoamLink 5003 H+ is a soft, flexible and compressible foamtape made of polyolefine foam with good adhesion to steel and cohesion even at high temperatures. It has a yellow siliconized paper liner and a layer of tackified polyacrylate adhesive on both sides coating the polyolefine foam carrier that is approximately 5mm thick without the liner. The tape has a service temperature range of -40°C to +70°C and can be stored for up to 12 months.
Netlink 90 hx_pet
NetLINK 90 HX is a scrim-reinforced, double-sided adhesive tape that provides dimensional stability for bonding rough or structured substrates. It has high adhesion to materials like steel, aluminum, glass and PMMA. The scrim reinforcement allows the tape to maintain its shape during application while still conforming to surfaces. NetLINK 90 HX is suitable for laminating, mounting and fixing applications where dimensional stability is needed. It has a service temperature range of -40°C to 80°C and can be stored for 12 months at around 20°C with 50% relative humidity.
Epibond® 100 A/B - Flyer
This document provides information on Epibond® 100 A/B, a two-component, extrudable, heat curing epoxy structural adhesive designed for aerospace applications requiring high heat resistance and retention of strength. It is characterized by high lap shear strength, a glass transition temperature above 120°C, and service temperatures up to 150°C. The adhesive spreads easily, has a long working time, and its moderate cure cycle involves heating to 65°C for 1 hour then 95°C for 5 hours. It bonds composite and metal substrates commonly used in aerospace and maintains high strength values at elevated temperatures.
What's hot (20)
Mercedes-Benz Parramatta Protection Program by Permagard Automotive Australasia
Mercedes-Benz Parramatta Protection Program by Permagard Automotive Australasia
Similar to FR Polyminium 201 (Rev. 6)
00 7465
This 4-page document provides information on a two-component, high build micaceous iron oxide pigmented polyamide cured recoatable epoxy coating. The coating is suitable for protecting steel and concrete structures exposed to atmospheric, land, or marine conditions. It has good adhesion, flexibility, chemical and heat resistance, and can be applied by airless spray or brush. The document provides details on product specifications, application instructions, and safety precautions.
Reinforced EPDM Membranes
- Carlisle manufactures reinforced EPDM roof membranes in thicknesses of 45, 60, and 75 mils. The membranes are internally reinforced with polyester scrim to provide puncture and tear resistance.
- Key benefits of Carlisle's Sure-Tough reinforced EPDM membranes include excellent weathering resistance, seamless sheets that are UL classified, and industry-leading warranties of up to 30 years.
- Carlisle's Factory-Applied Tape seam technology results in reliable seams with greater strength through a quality-controlled application process in the factory.
CoolMet Material Datasheet
CoolMet is a metal jacket painted with an innovative PVDF paint system that focuses on improving emissivity and reflectance to ensure maximum heat radiation and lower surface temperatures. It exhibits exceptional weather resistance, high abrasion and corrosion resistance, and resistance to chemical attack, making it suitable for applications in corrosive environments like oil and gas. CoolMet is produced in gray but other colors are available, and can be coated on metals like stainless steel and aluminum in profiles like corrugated or embossed. It has no known health risks and options are available for the underside like acoustic or moisture barriers.
Centroid adhesives, sealants, butyl tapes, silicone
This document provides information about a company that produces high quality elastomers and engineering plastics. They specialize in mixing, molding, extruding and fabricating silicone elastomers and high performance plastics. The company is located in Kerala, India and has a 30,000 square foot factory. They produce various types of rubber and plastic products including butyl sealants, silicone sealants, anti-tracking mastic, stress grading mastics and more for applications like cable joints, roofing, construction and more.
Butyl mastic tapes and sealants for automotive vaccum bagging cable jointing
Butyl mastic tapes of high quality with custom sizes
Provided in strips and rolls of custom length and size
Used mainly in automotive , vacuum bagging for wind mills, cable jointing kits, roofing tapes, cladding tapes, water tank sealing, construction.
Good sealing, antitracking property, high quality rubber and additives for better performance.
Supplied all india and can be exported to almost all countries like italy, united states, canada, australia, japan.
www.centroidpolymer.com
Memcon Transfer tape
This document describes Memcon's transfer tapes, which are adhesive tapes developed for use in demanding applications. The transfer tapes feature acrylic adhesive coated on a paper release liner. They provide strong adhesion to metals and plastics while demonstrating outstanding resistance to harsh environments. Standard roll sizes and performance specifications are provided for two product lines, the MTT764 and MTT864 tapes. Test results were obtained in Memcon's laboratory.
Ametalin CeaseFire™ - non-combustible, weather-proofing and vapour management...
Ametalin are excited to announce the launch of CeaseFire™. The ultimate non-combustible weather-proofing and vapour management membrane for NCC fire-resisting systems in Australian buildings.
Vacuum De Dewatering Machine
Walia International Machines is a multi divisional,vacuum de watering machine,vacuum dewatering machine,vacuum dewatering machines,vacuum de dewatering machines
Address : Walia International Machines Corporation,408 Vishwadeep , District Centre, Janak Puri New Delhi- 110058,India
Website : http://waliainternational.com
Telefax : 011 – 25546044 ,25521275
Emails : info@waliainternational.com
Low pressure over molding Supplier
Low pressure Molding could protect LED strip, PCB and magnetic very well. Macromelt & Technomelt as a common molding materials play in an encapsulating and environmentally protection on sensitive electronic components, IC molding sealing, Magnetic over molding and other sensitive components pakage. The main intention is to protect the sensitive electronic components during the molding stress, because high pressure molding would harm the properties of these components. Additionally, low pressure seal molding also protects electronic components against dust, moisture and vibration stress. It is also commonly used for Cable relief and sealing connectors.
Concise know how from EMKA - Enclosure/Cabinet Gasketing
This document provides information on various gasketing materials sold by EMKA, including EPDM, NBR, CR, PVC, TPE, PUR foam, and silicone. It describes the typical applications, temperature ranges, chemical resistance, and examples of profiles for each material. Additional sections cover topics like fire protection compounds, hygiene compounds, finishing of profiles, and pre-fabricated frames and rings.
Md500 green UV curable dielectric
MD-500GR is a UV curable dielectric polymer thick film ink that is designed to be used as an insulator for printed circuitry. It provides excellent adhesion to polycarbonate and polyester films, making it suitable as a dielectric layer, for crossovers, and as a tail coating for membrane switch applications. The MD-500GR has excellent flexibility and abrasion resistance. It passes crosshatch tape tests due to its strong adhesive properties.
tunnel and mine ventilation ducting catalogue
Jiangsu Sulong Eco-Technologies Co., Ltd is a Chinese manufacturer of PVC and coated fabric products. They produce three main product series: coated fabrics and membranes, ventilation hoses, and waterproof coiled materials. The company was established in 2007 and has five production lines and 23 patents. They supply products for construction, mining, and other industries and have received several quality certifications.
ICR Chrome surface system - English
Sprint Chrome Surface System is a coating developed by ICR Research & Development Lab to provide durable chrome effects on surfaces. It has outstanding chemical and physical resistance allowing for long-lasting chrome finishes. The system includes a black primer, chrome-effect basecoat, and special clearcoat designed specifically to work together to achieve the chrome appearance and protect the coated surface.
Donit Case Study: Steam Trap Valve Seal
One of our customers was faced with steam trap valve challenge. We are talking about saturated and superheated
steam at 46 bar and 400°C. Previous graphite gasket materials applied to the valve broke up during installation, as
they were instable and prone to friction movement. Pieces of remaining gasket had to be removed and seating of the
gasket to be cleaned.
Thermobreak Thermacoil - Brochure 270814 D
This document describes Thermacoil, a pre-insulated pipe insulation made of physically crosslinked polyolefin foam with an aluminum foil vapor seal. It can be used for refrigeration and HVAC applications. Key features include compliance with fire and thermal standards, green building ratings, and copper tubing manufactured to Australian standards. It comes in coil and sheet forms in various sizes for insulating pipes from 6mm to 50mm diameters.
Thermobreak Solar - Brochure 230914 D
Thermobreak is a high temperature pipe insulation material for solar heating systems. It is made of crosslinked closed cell polyolefin foam with a reinforced aluminum foil layer and can withstand temperatures up to 160°C. It comes in various thicknesses and sizes to insulate different diameter pipes. Thermobreak has high insulating properties, is resistant to UV light and moisture, and meets international fire safety standards.
Balancing Friction & Sealing Effectiveness in Gimbal Design
To ensure optimal accuracy AND protect the sensitive electronics inside the gimbals (aka pods, pan-tilt systems) they design, engineers must strike a balance between low friction operation and sealing effectiveness. This presentation explains the relationship between seals and gimbal performance. It also offers tips on how to leverage jacket materials, geometries, and energizer forces to reduce stiction while meeting IPX, MIL-STD, SWaP, and other strict requirements. If you want to build a better gimbal, this deck is really a must-see.
RUREDIL X Mesh C10 for Masonry
FRP for masonry, stone, flat/curved arch terracotta and cindercrete stabilization with a Class A Fire Rating for interior, exterior, and above or below grade (wet) applications.
Delrin 525GR Properties and Product Information
Delrin 525GR is very strong and stands up well to heat exposure, chemically resistant and has a low moisture absorption.
This industrial plastic is a 25% glass reinforced acetal homopolymer.
Loctite 594
Loctite ®Superflex Silicone Adhesives/Sealants temperatures between - 95F and +650F.high temperature silicone
Similar to FR Polyminium 201 (Rev. 6) (20)
Centroid adhesives, sealants, butyl tapes, silicone
Centroid adhesives, sealants, butyl tapes, silicone
Butyl mastic tapes and sealants for automotive vaccum bagging cable jointing
Butyl mastic tapes and sealants for automotive vaccum bagging cable jointing
Ametalin CeaseFire™ - non-combustible, weather-proofing and vapour management...
Ametalin CeaseFire™ - non-combustible, weather-proofing and vapour management...
Concise know how from EMKA - Enclosure/Cabinet Gasketing
Concise know how from EMKA - Enclosure/Cabinet Gasketing
Balancing Friction & Sealing Effectiveness in Gimbal Design
Balancing Friction & Sealing Effectiveness in Gimbal Design
FR Polyminium 201 (Rev. 6)
- 1. San Miguel Yamamura Woven Products Sdn. Bhd. [Formerly known as San Miguel Woven Products Sdn. Bhd.] A Subsidiary of San Miguel Yamamura Packaging International Ltd. Lots 9 & 10, Jalan Usaha 4, Ayer Keroh Industrial Estate, 75450 Melaka, Malaysia. Tel : 06-2323898 (5 lines) Fax : 06-2329916 / 06-2321437 PRODUCT DATA SHEET Customer Name : P&P PLASTICS PTY. LTD. Product Type : NFR 1 – AL Product Name : FR POLYMINIUM 201 Product Design : AL / PE TIE LAYER / HDPE WOVEN FABRIC CHARACTERISTIC TEST METHOD UNIT (SI) SPECIFICATION LaminationRollSpecifications Width In-house mm 1250 ± 5 Length In-house m ≥ 36 Grammage In-house g/m2 80 ± 10% Mass Content In-house kg/roll 3.95 ± 10% Resistance to Dry Delamination at elevated ambient temperatures SANS 1381-4:2013 - No delamination Resistance to Corrosion Wet delamination at elevated ambient temperatures SANS 1381-4:2013 - No corrosion No delamination Shrinkage MD CD SANS 1381-4:2013 % < 1.5 < 1.5 Emissivity SANS 1381-4:2013 Index ≤ 0.05 Water Vapour Permeance ASTM E96 g/(s.MN) ≤ 0.002 Fire Performance Classification SANS 428 (SANS 10177, PARTS 5, 9, 10) Class B/B3/4 Tensile Breaking Strength MD CD SANS 1381-4:2013 kN/m > 4 > 4 Bursting Strength ISO 2758 kPa > 500 Puncture Resistance SANS 456 mJ > 500 Edge Tear Resistance MD CD SANS 1381-4:2013 N > 100 > 100 System Thermal Resistance White side facing hot plate Foil side facing hot plate With two air gaps – heat flow down ISO 8301 : 1991 m2K/W > 0.8 > 0.8 Rev. 6 (29-10-2014) – B14NN00
- 2. San Miguel Yamamura Woven Products Sdn. Bhd. [Formerly known as San Miguel Woven Products Sdn. Bhd.] A Subsidiary of San Miguel Yamamura Packaging International Ltd. Lots 9 & 10, Jalan Usaha 4, Ayer Keroh Industrial Estate, 75450 Melaka, Malaysia. Tel : 06-2323898 (5 lines) Fax : 06-2329916 / 06-2321437 PRODUCT DATA SHEET CONSTRUCTION OF FR POLYMINIUM 201 (SANS 1381-4 CLASS B) Specific Test Conditions For System Thermal Resistance: Parameter Unit Setting Air Gap at Hot Side Air space Temperature mm °C 40 50 Air Gap at Cold Side Air space Temperature mm °C 60 10 Warnings There are special circumstances where unless special precautions are taken, the atmosphere in the roof can cause corrosion of the laminate that will directly affect its emissivity and therefore its thermal insulation properties. Air space is vital between insulation foil and battens. Under certain circumstances the aluminum foil may not be resistance to tarnishing and hence its reflective and emissive properties may be affected. Such conditions may include condensation, acidic vapors of sea salts and mists of corrosive liquids. Rev. 6 (29-10-2014) – B14NN00 Remark : PE - Polyethylene Aluminium Foil, 16-17 g/m² PE Tie Layer, 20-25 g/m² Woven Fabric, 40-48 g/m²