Follower 2010 .PDF
•
0 likes•116 views
This document contains a technical drawing of a part called a "Follower" with multiple dimensions, tolerances, and notes specifying design details. Dimensions range from 0.001 to 2.366 inches with various tolerances and place values. Notes indicate that all sharp corners should have a 0.02 radius and proprietary information.
Report
Share
Report
Share
Download to read offline
Recommended
Prysmian BICON 371 Aluminium Hook Cable Cleats
The document describes an aluminum hook cleat that is suitable for securing cables between 19-76mm in diameter. It has a two-piece, single fixing design that allows for double stacking and temporary open positioning. The cleat is manufactured from aluminum alloy and is intended for indoor or outdoor use in normal industrial environments between -60°C and +105°C. It should not be used for long vertical cable runs.
HEB - LOW OHM BATTERY SHUNT RESISTORS
This document summarizes the specifications of low ohm battery shunt resistors. The resistors come in open frame designs and power ratings from 6W to 36W with resistance values from R00005 to R001. They are used for current sensing applications in vehicles and equipment. The document provides details on dimensions, electrical characteristics, packaging, ordering information, and power derating curves.
739495-741444 Kathrien Antennas
This document provides specifications for a dual polarization antenna, including its frequency range, gain, beam width, electrical tilt, power handling, and mechanical dimensions. It also lists optional mounting accessories. The antenna is designed to withstand wind loads up to 200 km/h and operate in temperatures from -55 to +60 degrees Celsius.
My Design Projects_2
The document contains several technical drawings of mechanical parts with dimensions. The drawings include views and details of parts like dust bins, doors, rollers, shafts, racks, shelves and covers. Dimensioning and tolerances are provided in inches and millimeters. The drawings appear to be for manufacturing various components of a mechanical assembly.
HIR - WIRE WOUND RESISTORS SILICONE COATED TYPE
This document describes silicone coated wire wound resistors made by HTR. The resistors are available in power ratings from 10W to 600W, resistance ranges from R22 to 120K, and tolerance levels from ±1% to ±10%. They have flame retardant silicone coatings and nickel-plated terminations. Dimensions, electrical specifications, and applications are provided for selecting an appropriate resistor.
HRW - WIREWOUND, LOW OHM CURRENT SENSE SURFACE MOUNT POWER RESISTORS
• Wire wound and alloy ribbon
element options.
• Moulded resistor construction.
• Tape and reel packing for pick & place machine.
• Fusible type available.
• Non inductive type available.
HFO
The document describes HTR wire wound resistors that are silicone/cement coated and come in precision power ratings from 40W to 125W. They have resistance ranges from 10 to 33k ohms and can operate from -40°C to +250°C with derating. The resistors have tolerance ranges of ±10% or ±5%, voltage ratings based on power x resistance, and high insulation resistance. They are physically configured and packaged for bulk shipping in various small boxes based on power rating.
RSR - Wire wound resistors silicone coated type
This document describes silicone coated power resistors that are edge wound on a ceramic substrate. Key details include:
- Resistors come in types from 40W to 500W and resistance ranges from R05 to 18R.
- They have flame retardant silicone coatings and nickel-plated terminations compatible with various connector types.
- Dimensions, electrical characteristics, and mounting specifications are provided for each resistor type.
- The resistors are designed for heavy duty industrial applications and can withstand short term overloads.
Recommended
Prysmian BICON 371 Aluminium Hook Cable Cleats
The document describes an aluminum hook cleat that is suitable for securing cables between 19-76mm in diameter. It has a two-piece, single fixing design that allows for double stacking and temporary open positioning. The cleat is manufactured from aluminum alloy and is intended for indoor or outdoor use in normal industrial environments between -60°C and +105°C. It should not be used for long vertical cable runs.
HEB - LOW OHM BATTERY SHUNT RESISTORS
This document summarizes the specifications of low ohm battery shunt resistors. The resistors come in open frame designs and power ratings from 6W to 36W with resistance values from R00005 to R001. They are used for current sensing applications in vehicles and equipment. The document provides details on dimensions, electrical characteristics, packaging, ordering information, and power derating curves.
739495-741444 Kathrien Antennas
This document provides specifications for a dual polarization antenna, including its frequency range, gain, beam width, electrical tilt, power handling, and mechanical dimensions. It also lists optional mounting accessories. The antenna is designed to withstand wind loads up to 200 km/h and operate in temperatures from -55 to +60 degrees Celsius.
My Design Projects_2
The document contains several technical drawings of mechanical parts with dimensions. The drawings include views and details of parts like dust bins, doors, rollers, shafts, racks, shelves and covers. Dimensioning and tolerances are provided in inches and millimeters. The drawings appear to be for manufacturing various components of a mechanical assembly.
HIR - WIRE WOUND RESISTORS SILICONE COATED TYPE
This document describes silicone coated wire wound resistors made by HTR. The resistors are available in power ratings from 10W to 600W, resistance ranges from R22 to 120K, and tolerance levels from ±1% to ±10%. They have flame retardant silicone coatings and nickel-plated terminations. Dimensions, electrical specifications, and applications are provided for selecting an appropriate resistor.
HRW - WIREWOUND, LOW OHM CURRENT SENSE SURFACE MOUNT POWER RESISTORS
• Wire wound and alloy ribbon
element options.
• Moulded resistor construction.
• Tape and reel packing for pick & place machine.
• Fusible type available.
• Non inductive type available.
HFO
The document describes HTR wire wound resistors that are silicone/cement coated and come in precision power ratings from 40W to 125W. They have resistance ranges from 10 to 33k ohms and can operate from -40°C to +250°C with derating. The resistors have tolerance ranges of ±10% or ±5%, voltage ratings based on power x resistance, and high insulation resistance. They are physically configured and packaged for bulk shipping in various small boxes based on power rating.
RSR - Wire wound resistors silicone coated type
This document describes silicone coated power resistors that are edge wound on a ceramic substrate. Key details include:
- Resistors come in types from 40W to 500W and resistance ranges from R05 to 18R.
- They have flame retardant silicone coatings and nickel-plated terminations compatible with various connector types.
- Dimensions, electrical characteristics, and mounting specifications are provided for each resistor type.
- The resistors are designed for heavy duty industrial applications and can withstand short term overloads.
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are:Alloy ribbon element, Ceramic encased for greater heat dissipation and thermal stability, Low TCR, Negligible inductance. This product is consumable for Current Sensing for Industrial and Power Conditioning Applications.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hcal/
Rubber Moulding by GMT
The Rubber Rails product catalogue from GMT Rubber-Metal Technology. This product brochure features technical specifications and diagrams of a wide range of Rubber Rails available within the GMT range
final ppt 2007
This document describes the development of a centrifuge machine to remove excess zinc from small parts like nuts and bolts after a hot dip galvanizing process. Currently, excess zinc is removed manually using grinders and files, which is time-consuming, reduces output, and poses risks to operator health. The centrifuge machine was designed to automatically remove zinc through high-speed rotation. Test results showed the centrifuge machine recovered more zinc, increased production rates, reduced labor costs, and improved part quality and productivity over manual zinc removal. The centrifuge machine provides an effective automatic solution for continuous production processes involving hot dip galvanized small parts.
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
This product is a type of Symmetry Resistors, which is a type of Wire Wound Resistors. Features of this product are: Wire wound symmetry resistors, UL approved flame retardant coating, Stainless steel terminals. This products is consumable for Capacitor Charging and Discharging Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hsr/
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-english
This document provides specifications for HTR's HEAL series of current sense resistors. The resistors have a ceramic housing enclosing an alloy electrical resistance ribbon and tinned copper terminals. They are available in power ratings from 2.5W to 12W and resistance values from 0.0025 ohms to 20 ohms. The document lists the resistors' physical, electrical, and environmental characteristics and performance requirements.
Shelf u type dwg
This document is an engineering drawing for a double shelf unit. It includes dimensions for two shelf models, technical specifications like material used and surface finish, as well as manufacturing details such as tolerances and a note about removing sharp edges. The drawing also contains title block information crediting the designer and manufacturer.
HSR - Wire Wound Resistors
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, temperature range, voltage ratings, and testing requirements.
- Typical applications involving voltage balancing and capacitor discharge.
- Ordering information is given for resistance values and packings.
Machine vision technique to avoid alignment failure in space launch vehicle
Machine vision technique to avoid alignment failure in space launch vehicleSuseetharan Vijayakumaran
Machine vision inspection technique is a new technique based on computer vision theories and provides a better way for inspecting the launch vehicle and its strapon misalignment to avoid failure. Compared with the traditional inspection techniques, the machine vision inspection technique has the
advantage of non-contact, rapid, fast on-line acquisition time, good flexibility and enhanced accuracy, etc. It will meet the requirement of modern space launch vehicle launching developments. The image of launch vehicle is captured using a camera and stored as a jpeg image. Then the stored image is analyzed for the orientation, angle and alignment of the Space Launch Vehicle along with its strapons.58517990 estimating-resi-building
This document provides an estimate of construction costs for residential buildings of different sizes and structures. It gives material and labor rates to estimate costs for single-story and double-story load-bearing structures from 30-300 square meters. Specific costs are given for a 75 square meter single-story building and an 80 square meter building. Construction costs include estimates for materials like bricks, cement, sand, aggregates, as well as labor costs for masons, carpenters, painters and other workers. Additional costs are allotted for water supply, plumbing, drains and electrical wiring. Total construction costs per square foot are provided.
PNPA-ASSY-500
This document contains assembly drawing information for the PNPA Proof of Principal Machine including:
1) The drawing number PNPA-ASSY-500 and scale of 1:5
2) Notes to remove sharp edges and burrs and specify a machine surface finish of 1.6 micrometers
3) Unspecified tolerance values of 0.5mm for no decimals, 0.1mm for one decimal, 0.05mm for two decimals, and 1 degree for angular measurements
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HRE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hre/
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are: Flat vertical mounting type, Negligible inductance, Ceramic legs for greater stability also act as heat sink, PCB space saving resistor. This product is consumable for: Current sensing, Industrial and consumer electronics.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmvl/
CNC Programming
This document discusses techniques for improving the efficiency of CNC nesting and programming. It shows how nesting parts in pairs or staggered patterns can significantly reduce waste between parts compared to a standard nested pair. Examples demonstrate waste reductions from 9.9% to as much as 13.9% through staggered and rotated nesting approaches. Overall, the document emphasizes that CNC programmers should always consider nested pairs, offsets, rotations and other techniques to maximize material yield and reduce waste in CNC programs.
Permanent Lifting Magnets BHP USA flyer
Lifting Magnets by Braillon Magnets. Lift up to 5000Kg (11000lbs). Special Pole shoes can be manufactured to fit all size and parts.
bulletin board
The teacher had their 3rd grade students make self-portraits by drawing pictures of themselves inside the outline of a phone. Higher-level students also wrote short descriptions about themselves alongside their drawings, while lower-level students only drew self-portraits. The teacher displayed all of the students' self-portraits in the school hallway.
Vacaciones
Te daremos unos consejos sobre cómo disfrutar de unas buenas vacaciones sin poner en riesgo tus finanzas.
C.V
Sharif Ahammed is seeking a challenging job where he can utilize his skills and expand his knowledge. He has completed HSC in 2011 with a GPA of 4.11 and SSC in 2009 with a GPA of 3.41. His computer skills include Microsoft Office, Excel, Photoshop and internet browsing. He is proficient in Bengali and has standard English. He provides contact information and personal details like date of birth and marital status. His interests include traveling, movies, music and reading. He lists two references and work experience at ACI Advanced Chemical Industries and ACI Logistics.
Damatta voce tem_cultura
O documento discute os diferentes sentidos da palavra "cultura" e como ela é usada no senso comum versus como conceito antropológico. No senso comum, cultura é usada para classificar pessoas de acordo com seu nível de educação, mas antropologicamente cultura refere-se às normas e códigos compartilhados por um grupo que permitem a vida social. O documento argumenta que todas as formas culturais em uma sociedade são equivalentes e complementares.
Etiquetas Adesivas em Filmes (BOPP, PP, PET, Poliéster, PEBDL, PVdC, PE, PVC)
Etiquetas Adesivas em Filmes (BOPP, PP, PET, Poliéster, PEBDL, PVdC, PE, PVC)Promtec - Bobinas, Etiquetas Adesivas, Tags e Ribbons
O documento discute os tipos e usos de filmes. Ele explica que filmes podem ser usados em embalagens, arquitetura e automóveis para trazer sofisticação. Os filmes mais comuns são filmes cast e co-extrusados, que são produzidos através de processos de extrusão e estiramento para melhorar suas propriedades. O documento então descreve vários tipos específicos de filmes e suas aplicações.Diálogos 66
El periódico Diálogos es una publicación bimestral de distribución gratuita, realizada por los alumnos de la Escuela de Periodismo Carlos Septién García, con la coordinación del Departamento Editorial de la institución.
More Related Content
What's hot
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are:Alloy ribbon element, Ceramic encased for greater heat dissipation and thermal stability, Low TCR, Negligible inductance. This product is consumable for Current Sensing for Industrial and Power Conditioning Applications.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hcal/
Rubber Moulding by GMT
The Rubber Rails product catalogue from GMT Rubber-Metal Technology. This product brochure features technical specifications and diagrams of a wide range of Rubber Rails available within the GMT range
final ppt 2007
This document describes the development of a centrifuge machine to remove excess zinc from small parts like nuts and bolts after a hot dip galvanizing process. Currently, excess zinc is removed manually using grinders and files, which is time-consuming, reduces output, and poses risks to operator health. The centrifuge machine was designed to automatically remove zinc through high-speed rotation. Test results showed the centrifuge machine recovered more zinc, increased production rates, reduced labor costs, and improved part quality and productivity over manual zinc removal. The centrifuge machine provides an effective automatic solution for continuous production processes involving hot dip galvanized small parts.
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
This product is a type of Symmetry Resistors, which is a type of Wire Wound Resistors. Features of this product are: Wire wound symmetry resistors, UL approved flame retardant coating, Stainless steel terminals. This products is consumable for Capacitor Charging and Discharging Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hsr/
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-english
This document provides specifications for HTR's HEAL series of current sense resistors. The resistors have a ceramic housing enclosing an alloy electrical resistance ribbon and tinned copper terminals. They are available in power ratings from 2.5W to 12W and resistance values from 0.0025 ohms to 20 ohms. The document lists the resistors' physical, electrical, and environmental characteristics and performance requirements.
Shelf u type dwg
This document is an engineering drawing for a double shelf unit. It includes dimensions for two shelf models, technical specifications like material used and surface finish, as well as manufacturing details such as tolerances and a note about removing sharp edges. The drawing also contains title block information crediting the designer and manufacturer.
HSR - Wire Wound Resistors
This document provides information on HSR and HSRC series wire wound resistors from HTR including:
- Physical configuration details for coated and ceramic encased styles with dimensions, power ratings, and temperature specifications.
- Electrical and environmental characteristics including resistance tolerances, temperature range, voltage ratings, and testing requirements.
- Typical applications involving voltage balancing and capacitor discharge.
- Ordering information is given for resistance values and packings.
Machine vision technique to avoid alignment failure in space launch vehicle
Machine vision technique to avoid alignment failure in space launch vehicleSuseetharan Vijayakumaran
Machine vision inspection technique is a new technique based on computer vision theories and provides a better way for inspecting the launch vehicle and its strapon misalignment to avoid failure. Compared with the traditional inspection techniques, the machine vision inspection technique has the
advantage of non-contact, rapid, fast on-line acquisition time, good flexibility and enhanced accuracy, etc. It will meet the requirement of modern space launch vehicle launching developments. The image of launch vehicle is captured using a camera and stored as a jpeg image. Then the stored image is analyzed for the orientation, angle and alignment of the Space Launch Vehicle along with its strapons.58517990 estimating-resi-building
This document provides an estimate of construction costs for residential buildings of different sizes and structures. It gives material and labor rates to estimate costs for single-story and double-story load-bearing structures from 30-300 square meters. Specific costs are given for a 75 square meter single-story building and an 80 square meter building. Construction costs include estimates for materials like bricks, cement, sand, aggregates, as well as labor costs for masons, carpenters, painters and other workers. Additional costs are allotted for water supply, plumbing, drains and electrical wiring. Total construction costs per square foot are provided.
PNPA-ASSY-500
This document contains assembly drawing information for the PNPA Proof of Principal Machine including:
1) The drawing number PNPA-ASSY-500 and scale of 1:5
2) Notes to remove sharp edges and burrs and specify a machine surface finish of 1.6 micrometers
3) Unspecified tolerance values of 0.5mm for no decimals, 0.1mm for one decimal, 0.05mm for two decimals, and 1 degree for angular measurements
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HRE (...
This product is a type of Electron Beam Welded, which is a type of Current Sense Resistors.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hre/
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
This product is a type of Ceramic Encased Resistor, which is a type of Current Sense Resistors. Features of this product are: Flat vertical mounting type, Negligible inductance, Ceramic legs for greater stability also act as heat sink, PCB space saving resistor. This product is consumable for: Current sensing, Industrial and consumer electronics.
For more information of this product, please copy & paste the url given below:
http://htr-india.com/product/hmvl/
CNC Programming
This document discusses techniques for improving the efficiency of CNC nesting and programming. It shows how nesting parts in pairs or staggered patterns can significantly reduce waste between parts compared to a standard nested pair. Examples demonstrate waste reductions from 9.9% to as much as 13.9% through staggered and rotated nesting approaches. Overall, the document emphasizes that CNC programmers should always consider nested pairs, offsets, rotations and other techniques to maximize material yield and reduce waste in CNC programs.
Permanent Lifting Magnets BHP USA flyer
Lifting Magnets by Braillon Magnets. Lift up to 5000Kg (11000lbs). Special Pole shoes can be manufactured to fit all size and parts.
What's hot (14)
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
HTR India - Products - Wire Wound Resistors - Symmetry Resistors - HSR (English)
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-english
Htr india-products-current-sense-resistors-ceramic-encased-resistor-heal-english
Machine vision technique to avoid alignment failure in space launch vehicle
Machine vision technique to avoid alignment failure in space launch vehicle
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HRE (...
HTR India - Products - Current Sense Resistors - Electron Beam Welded - HRE (...
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
HTR India - Products - Current Sense Resistors - Ceramic Encased Resistor - H...
Viewers also liked
bulletin board
The teacher had their 3rd grade students make self-portraits by drawing pictures of themselves inside the outline of a phone. Higher-level students also wrote short descriptions about themselves alongside their drawings, while lower-level students only drew self-portraits. The teacher displayed all of the students' self-portraits in the school hallway.
Vacaciones
Te daremos unos consejos sobre cómo disfrutar de unas buenas vacaciones sin poner en riesgo tus finanzas.
C.V
Sharif Ahammed is seeking a challenging job where he can utilize his skills and expand his knowledge. He has completed HSC in 2011 with a GPA of 4.11 and SSC in 2009 with a GPA of 3.41. His computer skills include Microsoft Office, Excel, Photoshop and internet browsing. He is proficient in Bengali and has standard English. He provides contact information and personal details like date of birth and marital status. His interests include traveling, movies, music and reading. He lists two references and work experience at ACI Advanced Chemical Industries and ACI Logistics.
Damatta voce tem_cultura
O documento discute os diferentes sentidos da palavra "cultura" e como ela é usada no senso comum versus como conceito antropológico. No senso comum, cultura é usada para classificar pessoas de acordo com seu nível de educação, mas antropologicamente cultura refere-se às normas e códigos compartilhados por um grupo que permitem a vida social. O documento argumenta que todas as formas culturais em uma sociedade são equivalentes e complementares.
Etiquetas Adesivas em Filmes (BOPP, PP, PET, Poliéster, PEBDL, PVdC, PE, PVC)
Etiquetas Adesivas em Filmes (BOPP, PP, PET, Poliéster, PEBDL, PVdC, PE, PVC)Promtec - Bobinas, Etiquetas Adesivas, Tags e Ribbons
O documento discute os tipos e usos de filmes. Ele explica que filmes podem ser usados em embalagens, arquitetura e automóveis para trazer sofisticação. Os filmes mais comuns são filmes cast e co-extrusados, que são produzidos através de processos de extrusão e estiramento para melhorar suas propriedades. O documento então descreve vários tipos específicos de filmes e suas aplicações.Diálogos 66
El periódico Diálogos es una publicación bimestral de distribución gratuita, realizada por los alumnos de la Escuela de Periodismo Carlos Septién García, con la coordinación del Departamento Editorial de la institución.
Evolución de las nuevas tecnologías en la sociedad
El documento describe la evolución de las tecnologías y la sociedad a través de cuatro períodos: el fordismo trajo la clase media y el consumo masivo, el posfordismo mejoró las condiciones laborales y adaptó los productos a los consumidores, la sociedad del conocimiento hizo que el tiempo y lugar no influyan en las relaciones e hizo la información accesible en cualquier momento, y ahora la globalización conecta al mundo pero también lo individualiza.
Business opportunities created by upcoming technological disruption
Part of our monthly talk for Manly Entrepreneurs - Oct 2014
A snapshot of new technologies likely to disrupt industries in the next 3-5 years.
A group conversation on the impact of such technologies on 'normal' businesses and what can be done to harness the changes likely to be brought up to our daily lives (work or play)
For the deep dive presentation on augmented reality (AR) and vritual reality by Hugo Ortega from http://www.onlyaugmented.com/
check his slidedeck: http://www.slideshare.net/HugoGastonOrtega
Any Question about the presentation, get in touch with us:
http://www.inmarketingwetrust.com.au/contact/
Creación de Clubes de Producto para el Desarrollo Turístico
Este documento describe la creación de clubes de producto como una estrategia para potenciar nuevos productos turísticos. Explica que los clubes de producto pueden ayudar a integrar y gestionar los recursos y atractivos de un destino para transformarlos en productos turísticos diferenciados. También presenta algunos casos exitosos de clubes de producto en destinos como el Caribe colombiano y Andalucía.
Fcf05 erika lópez
Este documento presenta la elaboración de estados financieros básicos como el estado de resultados y el balance general para la empresa Hermanos Aguirre S.A. de C.V. Incluye la clasificación de cuentas, los objetivos, la introducción a los estados financieros, y los estados financieros completos para la empresa.
Medicina ayurveda
El documento describe los tres doshas o constituciones del cuerpo humano según el Ayurveda - Vata, Pitta y Kapha - y sus características físicas y de personalidad asociadas. También resume los principios básicos del diagnóstico, tratamiento de enfermedades, alimentación y uso de plantas medicinales en el sistema médico Ayurveda de la India.
Claves para el éxito de un Club de Productos Turísticos
El club de producto es una herramienta de colaboración publico privada que está abriendo un nuevo enfoque para la mejora de la competitividad de empresas y destinos turísticos. Descubre las claves.
Viewers also liked (16)
Etiquetas Adesivas em Filmes (BOPP, PP, PET, Poliéster, PEBDL, PVdC, PE, PVC)
Etiquetas Adesivas em Filmes (BOPP, PP, PET, Poliéster, PEBDL, PVdC, PE, PVC)
Evolución de las nuevas tecnologías en la sociedad
Evolución de las nuevas tecnologías en la sociedad
Business opportunities created by upcoming technological disruption
Business opportunities created by upcoming technological disruption
Creación de Clubes de Producto para el Desarrollo Turístico
Creación de Clubes de Producto para el Desarrollo Turístico
Claves para el éxito de un Club de Productos Turísticos
Claves para el éxito de un Club de Productos Turísticos
Similar to Follower 2010 .PDF
Clip End.PDF
This document contains engineering drawings with detailed measurements and specifications for mechanical parts. Dimensions are provided in inches for various sections and features of the parts. Notes indicate proprietary information and provide labeling for drawings, scale, and other annotations. The drawings appear to be for two mechanical components with precise geometries and surface properties.
Miata water outlet base
This document appears to be an engineering drawing containing specifications for a part. It includes dimensions, tolerances, notes and labels for features. Key details include dimensions ranging from 0.408 to 4 inches, a center opening, water outlet, base, and that the material is aluminum. The drawing is scaled 1:1 and contains title block information such as the date, name of designer, and proprietary markings.
EJECTOR-ASSEMBLY.PDF
The document includes an exploded view diagram, bill of materials table, and multiple engineering drawings for an ejector assembly. The exploded view shows the 17 individual parts that make up the assembly and their positioning. The bill of materials lists each of the 17 parts with information like item number, part number, description, material, and quantity. The engineering drawings provide additional views and specifications for several of the individual parts that make up the ejector assembly.
LDavis_work_examples
This document contains work examples and specifications for manufacturing turbine blades and related components out of nickel alloys like Inconel. It includes summaries of 4 product launches for OEM manufacturing of turbine blades and compressor discs and 1 for component repair. It also provides details on the materials, number of operations, and specifications for components like dimensions, tolerances and surface finishes. Engineering drawings with additional details are referenced.
Offset Guid.PDF
This drawing provides the design specifications for an offset guide including dimensions, tolerances, materials, and various views. Key details include dimensions ranging from 10 to 135 millimeters, a material of 1060 alloy steel, and notes specifying rounds and fillets of 4 millimeters and a break of sharp corners. Views A-A and B-B show cross sections with labeled dimensions and radii.
Three phase BLDC motor
Project report on design and fabrication of three phase bldc motor and the control circuit associated with it.
Повышение эффективности семейства SunLike
This document provides product data and specifications for Seoul Semiconductor's STW9C2SB-S mid-power LED. Key details include:
- The LED has a compact 3.0x3.0x0.6mm package size and comes in cool, neutral, and warm white color temperatures ranging from 2600K to 7000K.
- It provides high luminous intensity between 26-34 cd and high color quality with a minimum CRI of 95.
- The LED has good thermal and electrical characteristics like a maximum forward current of 200mA and operating temperature range of -40°C to 85°C.
- Detailed performance data, bin structure, and packaging information is
269-40288-12 (1) (1).pdf
This document is an electrical schematic diagram for a component that complies with various standards. It contains labels and wiring information for electrical components including fuses, relays, terminals and connectors. The diagram shows the electrical system wiring and connections between different parts in accordance with design specifications.
Drawings of Revit project for D type qtr.
The document contains construction plans and details for proposed Type D and Type C housing blocks and an officers' club building at Orient Area. It includes layout plans, section details, foundation details, beam and roof details, and reinforcement details. Dimensions and specifications are provided for structural elements including walls, columns, beams, slabs, and staircases.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english...
This document describes silicone coated wire wound resistors made by HTR. The resistors come in various power ratings from 10W to 600W, resistance ranges from R22 to 120K, and dimensions depending on power rating. They have flame retardant silicone coating, can operate from -55C to 350C, and are suitable for applications requiring dissipating large amounts of power like voltage dividers and load resistors. Ordering information includes specifying series type, power rating, resistance value, tolerance, and mounting hardware.
Plane & Stand Drawings.PDF
The document contains engineering drawings for a model airplane assembly including a stand with drawer base, model plane, and removable drawer. The drawings include views and details of each component showing dimensions and tolerances. Notes indicate the drawings are proprietary and confidential information for the unnamed company.
PROPOSED
This document provides electrical load details for multiple distribution boards (DBs) in two cold warehouses. It includes information like connected load, demand load, panel location, main switch, feeder cable details, and load details for various sections like cold units, lights, sockets etc. Electrical load data is provided over multiple pages in a table format with specifications like phases, cable size, ratings for each DB circuit.
10138367 29.01.15.PDF
This document contains design specifications and dimensional requirements for a tube holder part. Key details include:
- Material specification of TR-90 virgin resin with no recycled material allowed
- Dimensional tolerances defined for various size ranges according to ISO and DIN standards
- Key inspection dimensions marked with an asterisk inside an oval and require a Cpk greater than 1.33
- Surface finish specification of VDI-3400 #24-27 or better
- Notes on draft angles, flash, ejector marks, gating, and other manufacturing requirements
Npm scr 100_specsheet
The SCR-100 stage from Nippon Pulse is a versatile nanopositioning stage with six stroke lengths and three motor windings. It integrates a slide guide, encoder, and linear shaft motor. It offers sub-micron resolution without motion errors. Two SCR-100 stages can be directly bolted together to form a compact X-Y stage without needing adapter plates. The document provides specifications for six SCR-100 stage models with different travel lengths and performance characteristics.
13-0002 REV A LMDS2004-2A1B.PDF
This document contains drawings and specifications for a dual axis linear stepper motor model LMDS2004-2A1B. The drawings include dimensions, tolerances, materials, and notes. The motor specifications list electrical properties including resistance, inductance, and time constant. Mechanical specs include forces, pressures, masses and bearing type. Revision A updated the motor cover, directions and connections.
MAIN CANOPY BAJAJ HR(22.09.2016)
This document provides structural calculations for the main canopy of a building located in Mumbai. It includes STAAD analysis of the steel structure, material properties, load assumptions, and results of the analysis. Key sections analyzed include the outer MS frame, inner MS frame, supporting MS pipes and tubes. Loads considered are self-weight, wind load, and live load. The analysis checks the steel structure for deflection under these loads.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english
This document describes HTR's HIR series of cement coated wire wound resistors. Key details include:
- They are available in power ratings from 10W to 600W and resistance ranges from 22 ohms to 120k ohms.
- Various models and specifications are provided for physical dimensions, resistance tolerances, voltage ratings, temperature ranges, and environmental/electrical test standards.
- They are suitable for applications requiring dissipating large amounts of power such as grid resistors, voltage dividers, and load resistors.
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english
This document describes HTR's HIR series of cement coated wire wound resistors. Key details include:
- They are available in power ratings from 10W to 600W and resistance ranges from 22 ohms to 120k ohms.
- Various models and specifications are provided for physical dimensions, resistance tolerances, voltage ratings, temperature ranges, and environmental test results.
- They are suitable for applications requiring dissipating large amounts of power such as grid resistors, voltage dividers, and load resistors. Ordering information includes specifying series, type, packaging, resistance value, tolerance, and mounting hardware.
SIBA Fuses DC Traction Fuses - Rail Industry Fuse Links
SIBA URDC DC fuses are available for use on traction, battery and railway circuit applications - traction fuses are designed for heavy duty circuit protection to following standards UIC550, IEC60269 and VDE 0636-40.
GDT_Final Project
This document is a final drawings package submitted by mechanical engineering students at California State University Northridge for their senior design project. It includes 16 sheets detailing the design of a drive train box assembly for a Formula SAE racecar, including title block information, bills of materials, assembly drawings, and detailed part drawings showing dimensions, tolerances, notes, and other annotations. The drawings were created using SolidWorks and follow geometric dimensioning and tolerancing standards.
Similar to Follower 2010 .PDF (20)
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english...
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hir-english
SIBA Fuses DC Traction Fuses - Rail Industry Fuse Links
SIBA Fuses DC Traction Fuses - Rail Industry Fuse Links
Follower 2010 .PDF
- 1. .180 1.343 .150 .390 TYP. .756 2 PLACES.366.100 .496 .086 .330 .410 2.366 .823 .364 .659 .070 TYP. .080 R.256 TYP. R.421 R.273 .025 .105 .150 .756 .318 .145 .290 1.280 45.00° 4 PLACES TYP. 1.100 .711 .378 0.001 0.01 1 NOTE: ALL SHARP CORNERS SHALL BE A RADII OF 0.02 FOLLOWER MODIFICATION ABS PLASTIC D C B AA B C D 12345678 8 7 6 5 4 3 2 1 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF WILDFIRE ENGINEERING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF WILDFIRE eNGINEERING IS PROHIBITED. PROPRIETARY AND CONFIDENTIAL NEXT ASSY USED ON APPLICATION DIMENSIONS ARE IN INCHES TOLERANCES: FRACTIONAL DRAFT: < TWO PLACE DECIMAL THREE PLACE DECIMAL INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL FINISH DRAWN CHECKED ENG APPR. MFG APPR. Q.A. COMMENTS: DATENAME TITLE: SIZE B DWG. NO. REV WEIGHT:SCALE: 2:1 UNLESS OTHERWISE SPECIFIED: 0 MJD 9/30/2013 SHEET 1 OF 1 Follower DO NOT SCALE DRAWING WILDFIRE ENGINEERING