This document provides instructions for setting up a Flavia drinks station to create various hot and cold beverages at home with ease. It explains that the user must first "prime" or prepare the station by filling the water tank, installing a water filter, adjusting the brew head, and dispensing water through the system. Once primed, the station is ready to make drinks by inserting flavor packs, selecting options, and waiting for the lights to flash indicating the beverage is ready. Instructions are provided for making single-serve drinks as well as multi-step cappuccinos and other frothy beverages. Customer service contact information is also included for assistance.

1. Welcome to FLAVIA®
,
You are about to experience a world of unlimited
drink possibilities. Now,
creating gourmet drinks
like Cappuccinos, Lattes,
Iced Drinks, Wellbeing
Drinks, Hot Chocolate and
Fresh Leaf Teas at home is as easy
as pressing a button. Make your favorites
one cup at a time, with no need to clean up!
But first, you need to set up your drinks station.
(We call it priming.) Follow the quick and easy
directions and in just a few minutes you’ll be
sipping your favorite FLAVIA®
drink!
Enjoy!
FLAVIA ® , FLAVIA FUSION™, Mars®, Milky Way ® /™ /© & designs MASTERFOODS 2006
DISCOVER AND SHARE AT
myflavia.com
888.MYFLAVIA / 888.693.5284
FLAVIAFUSION™
DRINKSSTATION
QUICK
STARTGUIDE
FLH105 QuickStart poster-3 8/29/06 12:00 PM Page 1

2. Place cup on stand.
Adjust the brew
head by pressing
the button on left
of the brew head and
sliding up or down.
Open the brew head door
by turning the top ring a quarter turn
counterclockwise. Insert the pack into
the brew head until it clicks in place.
Close the brew head by
turning the top ring a
quarter turn clockwise.
YOU WILL FEEL SOME
RESISTANCE WHICH IS
NORMAL – YOU ARE
ACTUALLY BREAKING
THE SEAL OF FRESHNESS.
Press a selection button
according to the drink
you are brewing.
FOLLOW THE CHART
TO THE RIGHT
FOR BREWING
INSTRUCTIONS.
NOW LET’S MAKE A DRINK.Now that your drinks station is primed, you’re ready to make your first drink.
1. 2.
4.
For customer service call 888.MYFLAVIA / 888-693-5284 or go online at myflavia.com
For detailed instructions on set-up and operation of your Fusion™
drinks station refer to the User Guide.
WHAT DO THE FLASHING LIGHTS MEAN?
3 Lights Flash - Slowly Water heating up
3 Lights Flash - Fast Needs water or reservoir not on properly
3 Steady Lights Ready to brew a drink
DRINKS TO BE BREWED STEP 1: STEP 2:
Insert Choco pack. Close
the brew head door then
press choco/other button
on the left.
When all 3 lights flash, your drink is ready.
Brewing time is about 30 seconds.
Insert Coffee or Tea pack.
Close the brew head
door. Tailor your strength
to your preference then
press coffee/tea button
in the middle.
Insert FLAVIA®
Milky
Way®
Swirl, Creamy
Topping™
or Choco
first. Close the brew head
door then press the
frothy 2-pack button
on the right.
FOR 1-PACK DRINKS:
Coffees, Teas, Wellbeing
FOR 2-PACK DRINKS:
Cappuccino, Mochaccino,
Chococcino, Chai Latte
(See Recipe Guide)
When all 3 lights flash, your drink is ready.
Brewing time is about 30 seconds.
AT THE END OF THE FIRST BREW, THE FROTHY
2 PACK BUTTON WILL FLASH. This is a prompt
to open the door, discard the first (used) pack.
Use caution as it will be HOT.
INSERT THE 2ND PACK. Close the brew head
door. Press the frothy 2-pack button again. When
all 3 lights flash, your drink is ready. Brewing
time is about 30 seconds.
FOR 1-PACK CHOCO:
Choco/Other
BEFOREYOU MAKE
YOUR FIRST DRINK!
1.
Plug in the drinks station.
2.
Fill the water tank with
cold water to the MAX line
and replace lid.
Remove the lid. Inside you will find a water filter. Install
the filter, small end first, by pushing it firmly into the
round location at the bottom of the water tank.
Remove the water tank
from the drinks station.
Put the drip tray on the
appliance in the position
indicated and then the
metal cup stand on top
of the drip tray.
3.
You can adjust the height
of the brew head by
pushing the button on
the left of brew head and
sliding up or down.
Place a cup or mug on
the cup stand.
Press the left and right selection buttons down simultaneously.
WHILE HOLDING THE BUTTONS DOWN (choco/other and
frothy 2 pack), SWITCH THE DRINKS STATION ON.
Switch is found on back of unit’s base.
4.
Hold down the buttons
until approximately a 1/4
cup of water is dispensed
into the cup. It may take
up to 20 seconds for
water to appear.
To brew a delicious
FLAVIA®
drink, you first
need to prep (prime) the
drinks station. Don’t worry!
You only have to do this
once and it can be done in
4 short, easy steps.
AT THE
SAME TIME
3.
Tailor your drink
strength to your
particular taste:
smallest circle
= very strong
largest circle
= regular strength
The strength dial only works
on coffee and tea drinks.
IF YOU NEED
HELP WITH THIS
PROCESS, CALL US
AT 888-693-5284.
FLH105 QuickStart poster-3 8/29/06 12:00 PM Page 2