This document is a catalogue entry for a Universal Flammability Test Chamber. It tests the flammability of materials like textiles, plastics, and rubber by measuring the flame spreading speed in the horizontal direction. The chamber is made of stainless steel or galvanized iron and coated with epoxy. It has a control panel separate from the timer and adjustable sample fixtures that can test materials at 45, 60 degrees or horizontally and vertically. The chamber's temperature range is 0-99 degrees Celsius and it has a burner head diameter of 9.5mm that produces a 38mm flame for 15 seconds to ignite samples.
we supply all kind of bitumen/Asphalt from Iran refineries, such as
http://en.pasargadoil.com
and http://jeyoil.com/en/
As I am sure all of you a wear, unfortunately most of Iranian refineries does not deliver on LC Terms and your Discharge port, that is where we are coming in picture.
We have direct connections with those refinery so we purchase in cash on FOB iran and deliver to you and our clients on their own request port and LC Terms.
We will offer quality and services with suitable price.
Also we can arrange visiting side as well.
Conformal Coating Salt Spray Comparison Test Momentive
Silicone conformal coatings' and other competitive materials such as silicone resin, polyolefin, polyurethane and acrylic underwent salt spray testing to understand their ability to withstand critical elements. See the results.
Conformal Coating Noxious Gas Corrosion Comparison TestMomentive
Silicone conformal coatings' corrosion resistance performance has been tested in comparison to competitive materials such as silicone resin, polyolefin, polyurethane and acrylic. See the results.
Bitumen: It is a petroleum Product obtained by distillation of crude petroleum
Bitumen: It is a petroleum Product obtained by distillation of crude petroleum
Bitumen has got different uses. In fact, before used as the principal binder in constructing highways ,bitumen was used in roofing, flooring, bridge, sidewalk surfacing, waterproofing etc purposes.
Bitumen obtained by different ways, vary in property. Even bitumen obtained by refining petroleum crude varies in property depending on the source of crude petroleum and refining process.
Thus, bitumen needs grading, primarily for the different purposes for which it is used, even in highway construction too, the purposes may be different. Secondarily, bitumen refined from different crude oil source and by different refining processes, varies in property. To categories that, bitumen needs to be graded.
we supply all kind of bitumen/Asphalt from Iran refineries, such as
http://en.pasargadoil.com
and http://jeyoil.com/en/
As I am sure all of you a wear, unfortunately most of Iranian refineries does not deliver on LC Terms and your Discharge port, that is where we are coming in picture.
We have direct connections with those refinery so we purchase in cash on FOB iran and deliver to you and our clients on their own request port and LC Terms.
We will offer quality and services with suitable price.
Also we can arrange visiting side as well.
Conformal Coating Salt Spray Comparison Test Momentive
Silicone conformal coatings' and other competitive materials such as silicone resin, polyolefin, polyurethane and acrylic underwent salt spray testing to understand their ability to withstand critical elements. See the results.
Conformal Coating Noxious Gas Corrosion Comparison TestMomentive
Silicone conformal coatings' corrosion resistance performance has been tested in comparison to competitive materials such as silicone resin, polyolefin, polyurethane and acrylic. See the results.
Bitumen: It is a petroleum Product obtained by distillation of crude petroleum
Bitumen: It is a petroleum Product obtained by distillation of crude petroleum
Bitumen has got different uses. In fact, before used as the principal binder in constructing highways ,bitumen was used in roofing, flooring, bridge, sidewalk surfacing, waterproofing etc purposes.
Bitumen obtained by different ways, vary in property. Even bitumen obtained by refining petroleum crude varies in property depending on the source of crude petroleum and refining process.
Thus, bitumen needs grading, primarily for the different purposes for which it is used, even in highway construction too, the purposes may be different. Secondarily, bitumen refined from different crude oil source and by different refining processes, varies in property. To categories that, bitumen needs to be graded.
Melt Flow Index Tester, Melt Flow Index Tester Manufacturers and Suppliers In...Presto Group
Looking for Melt Flow Index Tester manufacturers, Melt Flow Index Tester suppliers, Melt Flow Index Tester producers, Melt Flow Index Tester exporters, Melt Flow Index Tester wholesalers, Melt Flow Index Tester production centers ? Browse PrestoGroup.com for all your testing instruments needs. For more information visit- http://www.prestogroup.com/plastic-testing-instruments/melt-flow-index-deluxe
1) Melt Flow Index Tester -This instrument measures the rate of extrusion of Molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position.
SPECIFICATION
Instrument with following accessories will be supplied
Digital stop watch, Temp. Controller ( PID ), Piston, Orifice remove,
Barrel Cleaner, Orifice Cleaner,
Scoop, combined weight of 2.16 Kgs.. and 5.0 Kgs.
1. Max. Temp. Ambient to 300°C
2. Resolution : 0.10°C, Accuracy : + 0.20°C
Timer 0-99.9 min.
2) Izod Impact Tester-" Facility is provided for Computer Interface."
The resistance to breakage by flexural shock of plastics and Electrical insulating materials as indicated by the energy extracted from standardized pendulum type hammers mounted on standardized machines in breaking standard specimens with pendulum swing. The energy absorbed per unit of specimen width is reported in joules.
Annealing Response of Aluminum Alloy AA6014 Processed By Severe Plastic Defor...IRJESJOURNAL
Abstract: In this paper the study of micro structural stability during annealing with respect to time of conventionally grains (CG) and ultrafine-grained (UFG) of Aluminum AA6014 i s carried out. It has been observed that, the effect of the second phase magnesium-silicon particles in the CG and UFG AA6014 samples leads to a rapid hardness which increases from 40HV10 to 70HV10 within 7 days. Artificial aging shows that the material hardness even increased after 20 hours of annealing at 180°C. In total 30 hours of annealing, the hardness arrives at its maximum and then reduces due to the formation of Mg2Si precipitates, which rise in size and change their coherency. The precipitates cannot efficiently pin the dislocations and act as barriers to the dislocation motion which indicate an overall decrease in the hardness. It also has been found that the ultrafinegrained AA6014 alloy loses its thermal stability at approximately 200°C and recrystallized at 300°C. Thermal stability is strongly dependent on the material purity, second phase particles and/or oxide particles which may break up during rolling and lead to some dispersion strengthening.
(https://www.premierpolymers.net/) We are a leading organization engaged in offering a wide assortment of Industrial Laboratory Products to our clients. These products are precisely engineered by our experts as per the requirements of our clients. We offer our products at market leading prices for avoiding the budgetary constraints of our clients. The range of products offered by us finds an extensive application in various laboratories.
We Xtreme Engineering Equipment Pvt. Ltd. from 2004 are a popular organization in the industry for Manufacturing a wide variety of Engine Test Rig, Fluid Mechanics, Cement-Concrete, Soil Lab Equipment and many more.
Super Toughened Epoxy Resists High Temperatures & ChemicalsMaster Bond
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Epoxy Adhesive Offers Thermal Conductivity and Chemical ResistanceHashevaynu
Master Bond two part epoxy EP62-1AO resists acids, bases and solvents while maintaining excellent strength properties. Its long working life makes it ideal for large scale bonding and sealing applications. Browse this infographic to learn more.
Our industrial polyester ranges of shades are capable of offering high resistance to extreme weather and consistency in the shade and the gloss level. For more information visit http://rapidcoat.com/products/thermosetting/pure-polyester-powders/industrial-grade.aspx or Call/WhatsApp: +91-9654292970, +91-7290035860 | email: exports@rapidcoat.com
Melt Flow Index Tester, Melt Flow Index Tester Manufacturers and Suppliers In...Presto Group
Looking for Melt Flow Index Tester manufacturers, Melt Flow Index Tester suppliers, Melt Flow Index Tester producers, Melt Flow Index Tester exporters, Melt Flow Index Tester wholesalers, Melt Flow Index Tester production centers ? Browse PrestoGroup.com for all your testing instruments needs. For more information visit- http://www.prestogroup.com/plastic-testing-instruments/melt-flow-index-deluxe
1) Melt Flow Index Tester -This instrument measures the rate of extrusion of Molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position.
SPECIFICATION
Instrument with following accessories will be supplied
Digital stop watch, Temp. Controller ( PID ), Piston, Orifice remove,
Barrel Cleaner, Orifice Cleaner,
Scoop, combined weight of 2.16 Kgs.. and 5.0 Kgs.
1. Max. Temp. Ambient to 300°C
2. Resolution : 0.10°C, Accuracy : + 0.20°C
Timer 0-99.9 min.
2) Izod Impact Tester-" Facility is provided for Computer Interface."
The resistance to breakage by flexural shock of plastics and Electrical insulating materials as indicated by the energy extracted from standardized pendulum type hammers mounted on standardized machines in breaking standard specimens with pendulum swing. The energy absorbed per unit of specimen width is reported in joules.
Annealing Response of Aluminum Alloy AA6014 Processed By Severe Plastic Defor...IRJESJOURNAL
Abstract: In this paper the study of micro structural stability during annealing with respect to time of conventionally grains (CG) and ultrafine-grained (UFG) of Aluminum AA6014 i s carried out. It has been observed that, the effect of the second phase magnesium-silicon particles in the CG and UFG AA6014 samples leads to a rapid hardness which increases from 40HV10 to 70HV10 within 7 days. Artificial aging shows that the material hardness even increased after 20 hours of annealing at 180°C. In total 30 hours of annealing, the hardness arrives at its maximum and then reduces due to the formation of Mg2Si precipitates, which rise in size and change their coherency. The precipitates cannot efficiently pin the dislocations and act as barriers to the dislocation motion which indicate an overall decrease in the hardness. It also has been found that the ultrafinegrained AA6014 alloy loses its thermal stability at approximately 200°C and recrystallized at 300°C. Thermal stability is strongly dependent on the material purity, second phase particles and/or oxide particles which may break up during rolling and lead to some dispersion strengthening.
(https://www.premierpolymers.net/) We are a leading organization engaged in offering a wide assortment of Industrial Laboratory Products to our clients. These products are precisely engineered by our experts as per the requirements of our clients. We offer our products at market leading prices for avoiding the budgetary constraints of our clients. The range of products offered by us finds an extensive application in various laboratories.
We Xtreme Engineering Equipment Pvt. Ltd. from 2004 are a popular organization in the industry for Manufacturing a wide variety of Engine Test Rig, Fluid Mechanics, Cement-Concrete, Soil Lab Equipment and many more.
Super Toughened Epoxy Resists High Temperatures & ChemicalsMaster Bond
Master Bond Supreme 62-1 delivers enhanced chemical and temperature resistance while maintaining high performance properties. This adhesive offers excellent flow properties and a long working life over a wide service temperature range. Scroll through this infographic to learn more!
Epoxy Adhesive Offers Thermal Conductivity and Chemical ResistanceHashevaynu
Master Bond two part epoxy EP62-1AO resists acids, bases and solvents while maintaining excellent strength properties. Its long working life makes it ideal for large scale bonding and sealing applications. Browse this infographic to learn more.
Our industrial polyester ranges of shades are capable of offering high resistance to extreme weather and consistency in the shade and the gloss level. For more information visit http://rapidcoat.com/products/thermosetting/pure-polyester-powders/industrial-grade.aspx or Call/WhatsApp: +91-9654292970, +91-7290035860 | email: exports@rapidcoat.com
Needle flame tester is the needle-shaped burner by a certain size, fill the inside with a specific gas (butane), and at 45 ° angle by fixed time and certain direction to test products, Assess the fire hazard of small flames caused by fault conditions inside the equipment, depending on the test sample Whether ignited, and its ignition time and combustion Length.more view on http://www.qinsun-lab.com/Products/Property/Flammability/165.html
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs Attention
Testing/Manufacture/Flammability test chamber
1. FEC
R
World Class Testing Equipments
An ISO 9001 Certified Co.
Catalogue of Flammability Test Chamber
2. Universal Flammability Test Chamber
Horizontal Flammability Tester is applicable to access the flammability performance of textiles by determining
the flame spreading speed in the horizontal direction flammability tester fabric horizontal flammability tester,
plastic, rubber parts and other toy horizontal flammability tester, horizontal flammability testing machine.
Time range 0-999.9s
Time resolution 0.1s
Temperature range 0-99 degree
Ignition time 15s
Inner diameter of burner head 9.5mm
Flame height 38 mm +/- 2
Weight 24kg Approx
Spcification
Features
?Chamber made from stainless steel / G.I duly epoxy coated
?Control panel separate with timer
?Fixture made from S.S grade
?Universal fixture
?Adjustable fixture for test the sample 45,60 degree, horizontal and vertical direction.
Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll
No. 816, New Delhi 110043 (INDIA).
Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali
Gurudwara Road, Mohan Garden, Uttam Nager, Delhi -110059.
Cell - 9811478874, 9811938703, 9212912990
E-mail - info@fecproduct.com/ inquiry_fec@yahoo.com
Website - www.fecproduct.com
