FEAL-Technology produces thin-film heaters using amorphous alloys for applications in agriculture like greenhouses and poultry farms. They offer advantages like high efficiency, immediate heating, easy installation, and safety. FEAL-Technology also produces seat heaters for outdoor sporting events to increase comfort and attendance, and special heaters that can operate in extreme temperatures from -60 to 80 degrees Celsius for military and northern use. The company considers other applications of amorphous alloy heaters like heating fuels, medical equipment, mirrors and probes.
Low Cost & High Performance “Refractories & Insulation Boards
manufacturing company many years of Expertise in manufacturing and supplying High Temperature Refractory Insulation Boards, Gaskets, Insulation Rollers, and Hitech Advanced Materials for Steel Industry, Aluminium Industry, Power Plant.
Steel Industry/Aluminium Industry/Cryogenic Application/Casting/Boiler/ Power Plant etc.
PAN INDIA / IMPORT/EXPORT
Peek virgin properties data sheet _ gehrmandalika3
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of GEHR PEEK. Some key properties include:
1. A specific gravity of 1.32 g/cm3 and water absorption of 0.1%.
2. Tensile strength at yield of 97 MPa and elongation at break of over 60%.
3. A maximum service temperature of 260°C and minimum of -40°C.
4. Good electrical insulation with a volume resistivity over 1015 Ω-cm and dielectric strength of 19 kV/mm.
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of polyvinyl chloride (PVC-U). Key properties include:
- A specific gravity of 1.36 g/cm3 and water absorption of 0.2% under test methods ISO 1183 and DIN 53495.
- Tensile strength at yield of 55 MPa, elongation at yield of 3%, and tensile strength at break of 30 MPa per ISO 527.
- A Vicat softening point of 75°C and heat deflection temperature of 72°C as measured by ISO 306 and ISO 75 tests.
- Volume and surface resistivity over 1013-101
This document provides data on the properties of Lustran ABS H802 plastic material. It lists various mechanical, thermal, electrical, and processing properties, along with the test methods used to obtain the property values. Some key properties include a melt volume-flow rate of 8 cm3/10 min (ISO 1133), a tensile modulus of 2700 MPa (ISO 527), a Vicat softening temperature of 109°C (ISO 306), an electric strength of 34 kV/mm (IEC 60243-1), and a recommended melt temperature of 240°C and mold temperature of 70°C for injection molding. Safety information and processing notes are also provided.
This document provides data on the properties of Lustran ABS H604 plastic material. It lists values for the material's rheological, mechanical, thermal, electrical, and other properties as tested under various standards. Processing conditions for molding test specimens are also specified. The material has improved heat, chemical and impact resistance and is described as meeting ISO shortname specifications for ABS plastic.
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of GEHR PVDF. Some key properties include:
1. A specific gravity of 1.78 g/cm3, water absorption of less than 0.04%, and maximum service temperatures between -30°C to 150°C.
2. Mechanical properties include a tensile strength at yield of 50 MPa, elongation at yield of 9%, tensile strength at break of 46 MPa, and elongation at break of over 50%.
3. Thermal properties list vicat softening points of 140°C and 160°C, heat deflection temperatures of 145°C and 104°C, and a
Thermobreak is a high temperature pipe insulation material for solar heating systems. It is made of crosslinked closed cell polyolefin foam with a reinforced aluminum foil layer and can withstand temperatures up to 160°C. It comes in various thicknesses and sizes to insulate different diameter pipes. Thermobreak has high insulating properties, is resistant to UV light and moisture, and meets international fire safety standards.
Low Cost & High Performance “Refractories & Insulation Boards
manufacturing company many years of Expertise in manufacturing and supplying High Temperature Refractory Insulation Boards, Gaskets, Insulation Rollers, and Hitech Advanced Materials for Steel Industry, Aluminium Industry, Power Plant.
Steel Industry/Aluminium Industry/Cryogenic Application/Casting/Boiler/ Power Plant etc.
PAN INDIA / IMPORT/EXPORT
Peek virgin properties data sheet _ gehrmandalika3
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of GEHR PEEK. Some key properties include:
1. A specific gravity of 1.32 g/cm3 and water absorption of 0.1%.
2. Tensile strength at yield of 97 MPa and elongation at break of over 60%.
3. A maximum service temperature of 260°C and minimum of -40°C.
4. Good electrical insulation with a volume resistivity over 1015 Ω-cm and dielectric strength of 19 kV/mm.
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of polyvinyl chloride (PVC-U). Key properties include:
- A specific gravity of 1.36 g/cm3 and water absorption of 0.2% under test methods ISO 1183 and DIN 53495.
- Tensile strength at yield of 55 MPa, elongation at yield of 3%, and tensile strength at break of 30 MPa per ISO 527.
- A Vicat softening point of 75°C and heat deflection temperature of 72°C as measured by ISO 306 and ISO 75 tests.
- Volume and surface resistivity over 1013-101
This document provides data on the properties of Lustran ABS H802 plastic material. It lists various mechanical, thermal, electrical, and processing properties, along with the test methods used to obtain the property values. Some key properties include a melt volume-flow rate of 8 cm3/10 min (ISO 1133), a tensile modulus of 2700 MPa (ISO 527), a Vicat softening temperature of 109°C (ISO 306), an electric strength of 34 kV/mm (IEC 60243-1), and a recommended melt temperature of 240°C and mold temperature of 70°C for injection molding. Safety information and processing notes are also provided.
This document provides data on the properties of Lustran ABS H604 plastic material. It lists values for the material's rheological, mechanical, thermal, electrical, and other properties as tested under various standards. Processing conditions for molding test specimens are also specified. The material has improved heat, chemical and impact resistance and is described as meeting ISO shortname specifications for ABS plastic.
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of GEHR PVDF. Some key properties include:
1. A specific gravity of 1.78 g/cm3, water absorption of less than 0.04%, and maximum service temperatures between -30°C to 150°C.
2. Mechanical properties include a tensile strength at yield of 50 MPa, elongation at yield of 9%, tensile strength at break of 46 MPa, and elongation at break of over 50%.
3. Thermal properties list vicat softening points of 140°C and 160°C, heat deflection temperatures of 145°C and 104°C, and a
Thermobreak is a high temperature pipe insulation material for solar heating systems. It is made of crosslinked closed cell polyolefin foam with a reinforced aluminum foil layer and can withstand temperatures up to 160°C. It comes in various thicknesses and sizes to insulate different diameter pipes. Thermobreak has high insulating properties, is resistant to UV light and moisture, and meets international fire safety standards.
This document provides data on the properties of Lustran ABS H702 plastic material. It lists values for the material's rheological, mechanical, thermal, electrical, and other properties as determined by various standards tests. Key properties include a melt volume-flow rate of 16 cm3/10 min, a tensile modulus of 2500 MPa, a Vicat softening temperature of 104°C, a UL 94 HB burning rating, and a density of 1.040 g/cm3. Recommended processing conditions are an injection molding melt temperature of 240°C and mold temperature of 70°C.
This document provides information on the properties and processing conditions of Lustran ABS E211 LNS013 extrusion grade plastic. It lists values for the material's rheological, mechanical, thermal, electrical, and processing properties according to various international standards. Key properties include a melt volume-flow rate of 6 cm3/10 min, tensile modulus of 2500 MPa, Vicat softening temperature of 108°C, and recommended melt and mold temperatures of 240°C and 70°C respectively for injection molding.
3M Scotchcast 2130 Electrical Insulating Resin is a special flame retardant, two-part, polyurethane resin that is designed to replace the cable jacket or sheath when cable jointing or repairing flexible cables - including flexible and trailing mining and shipwiring cables.
3M Scotchcast 2130 resin is suitable for submerged (seawater) and offshore applications.
This document provides property data for the Novodur P2MC electroplating grade polymer including rheological properties, mechanical properties, thermal properties, electrical properties, and other information. Key properties include a melt volume-flow rate of 25 cm3/10 min, a tensile modulus of 2200 MPa, a Vicat softening temperature of 95°C, a volume resistivity of 1E13 Ohm-m, and a density of 1.030 g/cm3. Processing conditions for injection molding are also specified.
This data sheet provides information on the properties of Lustran ABS H950, including:
- It has very high heat resistance and a melt volume-flow rate of 4 cm3/10 min at 220°C.
- Its mechanical properties include a tensile strength of 50 MPa, tensile modulus of 2600 MPa, and Izod notched impact strength of 17 kJ/m2 at 23°C and 8 kJ/m2 at -30°C.
- Its thermal properties include a Vicat softening temperature of 113°C, burning rate of 55 mm/min, and glow wire test temperature of 700°C.
This document provides product information for the HiPanel T5 High Bay replacement LED fixture. It includes the company address and contact information, key product specifications like 100,000 hour LED life, up to 100 lm/W efficacy, and IP20 rating. It also provides dimensional drawings, part numbers, and illuminance charts for the various fixture sizes in the HiPanel product line.
This document provides product information for multiple series of lighting products, including LED lights, spotlights, floodlights, and low bay lights. For each series, it lists ordering references correlated to light source and wattage. It also provides dimensions, specifications, applications, characteristics, and performance details. Technical specifications include ingress protection ratings, operating temperatures, voltage inputs, weight, and more. Applications listed include indoor uses like factories, warehouses, and outdoor uses like construction sites.
AtomSvet is a Russian producer of LED luminaires for industrial facilities, public utilities and residential area, etc. The company offers a complete range of products and services, including site inspection, finding rational ways of saving energy by means of installing LED lighting, as well as technical inspection. AtomSvet also delivers turnkey solutions for companies providing smooth transition to energy saving lighting.
AtomSvet's advanced technologies and flexible approach allow to meet the needs of every customer.
AtomSvet lighting fixtures find an application in extreme weather conditions as well as in severe environments.
This document provides information on 3M Scotchcast 82-F and 82-BF Series Flexible Power Cable Splicing Kits. The kits are used to make permanent inline and tap splices for non-shielded portable power cables and cords rated up to 1000 Volts. Each kit contains molding materials and instructions to splice single or multi-conductor cables. The completed splices are flexible, flame retardant and can be used in various outdoor and submerged environments. The document outlines specifications, installation instructions, and performance test results for the splicing kits.
2017 asttar mining safety products catalogue-ATEX miners lamp and CE mining s...doris yang
This is Doris,Chinese manufacturer of CE mining self rescuer and miners lamps.
With ISO9001, ISO14001, ISO18000, CE authorized lab on respiratory devices for PPE directive, 21 years experience, ODM, OEM service provided,
Quotation will be sent to you soon if you need.
Pls feel free to contact me.
CE mining self rescuer & ATEX miners cap lamp
Doris yang-export specialist
Shaanxi Asttar explosion-proof safety technology Co., Ltd
Skype:dorisyang01@outlook.com
Email:doris@gokang.com
Thermal Vacuum Testing Chamber is used to test electrical, electronic, and material products under varying temperature conditions from -10°C to 98°C. The chamber specifications include internal dimensions of 100x540x260 mm, external dimensions of 610x540x340 mm, temperature constancy of ±0.3°C, and heating time of 45 minutes. It features a digital controller with PID and timer functions up to 9,990 minutes and safety devices to prevent overheating and power loss. The chamber allows testing components' high temperature resistance and accelerated lifetime testing in a controlled thermal vacuum environment.
This document summarizes the key features and specifications of Taconic's MCCL products. It provides details on the product portfolio, heat dissipation performance, dielectric breakdown voltage, hipot testing reliability, and general material properties. Testing results show the MCCL products have high dielectric breakdown voltages above 5kV on average, excellent heat dissipation capabilities, and 100% hipot reliability when tested up to 3kV. Customized product dimensions and metal types are available.
Gsun manufactures high-quality LED industrial lighting fixtures. The document describes Gsun's LED highbay light fixture which uses Bridgelux LED sources with a CRI over 85, lifespan over 50,000 hours, and efficiencies between 110-130 lm/W. The fixture has an IP65 rating, operating temperature range of -30°C to +45°C, and surge protection. It is suitable for use in factories, warehouses, corridors, and other industrial buildings. The document provides specifications for LED highbay fixtures ranging from 50W to 200W.
Glass filled polyamide (nylon) material for real-world physical testing and functional use. Excellent mechanical stiffness
and elevated temperature resistance. For Enclosures and housings that require more stiffness, sporting goods, aircraft and motorsports parts applications, etc.
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of GEHR E-CTFE. Some key properties include:
- A specific gravity of 1.71 g/cm3 and water absorption of less than 0.1%
- A maximum service temperature of 150°C and minimum of -76°C
- Tensile strengths of 30 MPa at yield and 47 MPa at break with elongation over 250%
- High impact strength with no break at testing limits
- Shore hardness of 68D, flexural strength of 54 MPa, and modulus of elasticity of 1827 MPa
- Volume and surface resistivity over 1016 and 1012 ohms respectively
The 180Watt solar panel has high conversion efficiency based on innovative photovoltaic technologies. It comes with a 25-year transferable warranty that is 6.7% higher than industry standards. The panel is recommended for residential, utility-scale, and commercial applications and has high reliability with a +/-3% power output tolerance.
This document provides information on encapsulation solutions from Huntsman Advanced Materials for various electronics applications. It discusses their epoxy and polyurethane encapsulant product lines that offer properties like thermal resistance, flame retardancy, mechanical strength, and chemical resistance. It also provides tables comparing different product options listing their applications, curing conditions, thermal properties, and other specifications.
This document provides specifications for several portable lighting products manufactured by Yueqing Iwiss Electric Co., Ltd. It describes portable searchlights, work lamps, light towers, and LED work lights that are used for nighttime repair, inspection, construction, rescue and other applications. The lights are powered by batteries or generators and have features like adjustable heads, high and low brightness settings, and long battery life. Materials used include ABS, aluminum alloys and PC plastics to withstand harsh conditions.
This document summarizes the industrial visits completed by Balraj Saini at various organizations as part of their B.Tech degree program. It includes visits to Toshniwal Industries Pvt. Ltd., All India Radio station in Ajmer, and Doordarshan Kendra. At Toshniwal Industries, Balraj learned about various products they manufacture including thermocouples, RTDs, rheostats, and thermal imagers. The visit to All India Radio station provided information on their high power transmitter, modulation techniques, 10KW and 100KW medium wave transmitters used, and the Marconi antenna system. The report concludes with an abstract highlighting the importance of industrial exposure for students.
This document summarizes an ELSR-LS self-regulating heating cable that is lightweight and designed for temperatures up to 80°C. The cable is flexible and can be cut to length, making it suitable for various industrial applications like pipe heating and frost protection. It has advantages like being self-regulating, moisture proof, and UV-resistant. Tables provide the cable's specifications, outputs at different temperatures, and maximum circuit lengths for various nominal outputs.
This document provides information about Marcel Electronics International (MEI), a privately owned electronics manufacturing company located in Orange, CA. It has been in business since 1979 and has 42,000 square feet of manufacturing space with 150 employees. MEI specializes in printed circuit board fabrication and assembly for the defense and aerospace industries as well as commercial sectors like wireless and medical. The document outlines MEI's certifications, technology capabilities, and the materials it supports for high frequency applications.
This document provides information on the ELW-Q heating cable from Thorne and Derrick, which is intended for applications requiring high heat output in dry environments up to 900°C. The cable has several advantages including being factory-terminated, providing high flexibility and output, and being ready for immediate use. It is suitable for heating glass, quartz and ceramic devices as well as systems with high output needs.
This document provides data on the properties of Lustran ABS H702 plastic material. It lists values for the material's rheological, mechanical, thermal, electrical, and other properties as determined by various standards tests. Key properties include a melt volume-flow rate of 16 cm3/10 min, a tensile modulus of 2500 MPa, a Vicat softening temperature of 104°C, a UL 94 HB burning rating, and a density of 1.040 g/cm3. Recommended processing conditions are an injection molding melt temperature of 240°C and mold temperature of 70°C.
This document provides information on the properties and processing conditions of Lustran ABS E211 LNS013 extrusion grade plastic. It lists values for the material's rheological, mechanical, thermal, electrical, and processing properties according to various international standards. Key properties include a melt volume-flow rate of 6 cm3/10 min, tensile modulus of 2500 MPa, Vicat softening temperature of 108°C, and recommended melt and mold temperatures of 240°C and 70°C respectively for injection molding.
3M Scotchcast 2130 Electrical Insulating Resin is a special flame retardant, two-part, polyurethane resin that is designed to replace the cable jacket or sheath when cable jointing or repairing flexible cables - including flexible and trailing mining and shipwiring cables.
3M Scotchcast 2130 resin is suitable for submerged (seawater) and offshore applications.
This document provides property data for the Novodur P2MC electroplating grade polymer including rheological properties, mechanical properties, thermal properties, electrical properties, and other information. Key properties include a melt volume-flow rate of 25 cm3/10 min, a tensile modulus of 2200 MPa, a Vicat softening temperature of 95°C, a volume resistivity of 1E13 Ohm-m, and a density of 1.030 g/cm3. Processing conditions for injection molding are also specified.
This data sheet provides information on the properties of Lustran ABS H950, including:
- It has very high heat resistance and a melt volume-flow rate of 4 cm3/10 min at 220°C.
- Its mechanical properties include a tensile strength of 50 MPa, tensile modulus of 2600 MPa, and Izod notched impact strength of 17 kJ/m2 at 23°C and 8 kJ/m2 at -30°C.
- Its thermal properties include a Vicat softening temperature of 113°C, burning rate of 55 mm/min, and glow wire test temperature of 700°C.
This document provides product information for the HiPanel T5 High Bay replacement LED fixture. It includes the company address and contact information, key product specifications like 100,000 hour LED life, up to 100 lm/W efficacy, and IP20 rating. It also provides dimensional drawings, part numbers, and illuminance charts for the various fixture sizes in the HiPanel product line.
This document provides product information for multiple series of lighting products, including LED lights, spotlights, floodlights, and low bay lights. For each series, it lists ordering references correlated to light source and wattage. It also provides dimensions, specifications, applications, characteristics, and performance details. Technical specifications include ingress protection ratings, operating temperatures, voltage inputs, weight, and more. Applications listed include indoor uses like factories, warehouses, and outdoor uses like construction sites.
AtomSvet is a Russian producer of LED luminaires for industrial facilities, public utilities and residential area, etc. The company offers a complete range of products and services, including site inspection, finding rational ways of saving energy by means of installing LED lighting, as well as technical inspection. AtomSvet also delivers turnkey solutions for companies providing smooth transition to energy saving lighting.
AtomSvet's advanced technologies and flexible approach allow to meet the needs of every customer.
AtomSvet lighting fixtures find an application in extreme weather conditions as well as in severe environments.
This document provides information on 3M Scotchcast 82-F and 82-BF Series Flexible Power Cable Splicing Kits. The kits are used to make permanent inline and tap splices for non-shielded portable power cables and cords rated up to 1000 Volts. Each kit contains molding materials and instructions to splice single or multi-conductor cables. The completed splices are flexible, flame retardant and can be used in various outdoor and submerged environments. The document outlines specifications, installation instructions, and performance test results for the splicing kits.
2017 asttar mining safety products catalogue-ATEX miners lamp and CE mining s...doris yang
This is Doris,Chinese manufacturer of CE mining self rescuer and miners lamps.
With ISO9001, ISO14001, ISO18000, CE authorized lab on respiratory devices for PPE directive, 21 years experience, ODM, OEM service provided,
Quotation will be sent to you soon if you need.
Pls feel free to contact me.
CE mining self rescuer & ATEX miners cap lamp
Doris yang-export specialist
Shaanxi Asttar explosion-proof safety technology Co., Ltd
Skype:dorisyang01@outlook.com
Email:doris@gokang.com
Thermal Vacuum Testing Chamber is used to test electrical, electronic, and material products under varying temperature conditions from -10°C to 98°C. The chamber specifications include internal dimensions of 100x540x260 mm, external dimensions of 610x540x340 mm, temperature constancy of ±0.3°C, and heating time of 45 minutes. It features a digital controller with PID and timer functions up to 9,990 minutes and safety devices to prevent overheating and power loss. The chamber allows testing components' high temperature resistance and accelerated lifetime testing in a controlled thermal vacuum environment.
This document summarizes the key features and specifications of Taconic's MCCL products. It provides details on the product portfolio, heat dissipation performance, dielectric breakdown voltage, hipot testing reliability, and general material properties. Testing results show the MCCL products have high dielectric breakdown voltages above 5kV on average, excellent heat dissipation capabilities, and 100% hipot reliability when tested up to 3kV. Customized product dimensions and metal types are available.
Gsun manufactures high-quality LED industrial lighting fixtures. The document describes Gsun's LED highbay light fixture which uses Bridgelux LED sources with a CRI over 85, lifespan over 50,000 hours, and efficiencies between 110-130 lm/W. The fixture has an IP65 rating, operating temperature range of -30°C to +45°C, and surge protection. It is suitable for use in factories, warehouses, corridors, and other industrial buildings. The document provides specifications for LED highbay fixtures ranging from 50W to 200W.
Glass filled polyamide (nylon) material for real-world physical testing and functional use. Excellent mechanical stiffness
and elevated temperature resistance. For Enclosures and housings that require more stiffness, sporting goods, aircraft and motorsports parts applications, etc.
This technical data sheet provides physical, mechanical, thermal, electrical, and additional properties of GEHR E-CTFE. Some key properties include:
- A specific gravity of 1.71 g/cm3 and water absorption of less than 0.1%
- A maximum service temperature of 150°C and minimum of -76°C
- Tensile strengths of 30 MPa at yield and 47 MPa at break with elongation over 250%
- High impact strength with no break at testing limits
- Shore hardness of 68D, flexural strength of 54 MPa, and modulus of elasticity of 1827 MPa
- Volume and surface resistivity over 1016 and 1012 ohms respectively
The 180Watt solar panel has high conversion efficiency based on innovative photovoltaic technologies. It comes with a 25-year transferable warranty that is 6.7% higher than industry standards. The panel is recommended for residential, utility-scale, and commercial applications and has high reliability with a +/-3% power output tolerance.
This document provides information on encapsulation solutions from Huntsman Advanced Materials for various electronics applications. It discusses their epoxy and polyurethane encapsulant product lines that offer properties like thermal resistance, flame retardancy, mechanical strength, and chemical resistance. It also provides tables comparing different product options listing their applications, curing conditions, thermal properties, and other specifications.
This document provides specifications for several portable lighting products manufactured by Yueqing Iwiss Electric Co., Ltd. It describes portable searchlights, work lamps, light towers, and LED work lights that are used for nighttime repair, inspection, construction, rescue and other applications. The lights are powered by batteries or generators and have features like adjustable heads, high and low brightness settings, and long battery life. Materials used include ABS, aluminum alloys and PC plastics to withstand harsh conditions.
This document summarizes the industrial visits completed by Balraj Saini at various organizations as part of their B.Tech degree program. It includes visits to Toshniwal Industries Pvt. Ltd., All India Radio station in Ajmer, and Doordarshan Kendra. At Toshniwal Industries, Balraj learned about various products they manufacture including thermocouples, RTDs, rheostats, and thermal imagers. The visit to All India Radio station provided information on their high power transmitter, modulation techniques, 10KW and 100KW medium wave transmitters used, and the Marconi antenna system. The report concludes with an abstract highlighting the importance of industrial exposure for students.
This document summarizes an ELSR-LS self-regulating heating cable that is lightweight and designed for temperatures up to 80°C. The cable is flexible and can be cut to length, making it suitable for various industrial applications like pipe heating and frost protection. It has advantages like being self-regulating, moisture proof, and UV-resistant. Tables provide the cable's specifications, outputs at different temperatures, and maximum circuit lengths for various nominal outputs.
This document provides information about Marcel Electronics International (MEI), a privately owned electronics manufacturing company located in Orange, CA. It has been in business since 1979 and has 42,000 square feet of manufacturing space with 150 employees. MEI specializes in printed circuit board fabrication and assembly for the defense and aerospace industries as well as commercial sectors like wireless and medical. The document outlines MEI's certifications, technology capabilities, and the materials it supports for high frequency applications.
This document provides information on the ELW-Q heating cable from Thorne and Derrick, which is intended for applications requiring high heat output in dry environments up to 900°C. The cable has several advantages including being factory-terminated, providing high flexibility and output, and being ready for immediate use. It is suitable for heating glass, quartz and ceramic devices as well as systems with high output needs.
This document describes a PTFE insulated heating cable with a protective braided copper/nickel coating. The cable, called ELKM-AE, is highly flexible and can be used on small components or surfaces in corrosive environments. It has a high maximum operating temperature of 260°C and resistance to chemicals and moisture. Applications include heating pipes, vessels, valves, rotor blades, and marble plates.
High Temperature Ceramic Capacitors For Harsh EnvironmentsRandall Ghany
This document summarizes KEMET's high temperature ceramic capacitor products for harsh environments. It provides an overview of their applications, product types, differentiators, grades and ratings. It highlights several new products including a 200°C HV C0G SMD MLCC, 200°C gold termination finishes, and a 260°C C0G SMD MLCC. The document concludes by announcing an upcoming conference on high temperature electronics and thanking the audience.
This document describes a PTFE insulated heating cable with a protective braided covering suitable for use on apparatus, vessels, pipes and other industrial applications. The cable is highly flexible, can bend tightly, operates at temperatures up to 260°C, and is resistant to chemicals and moisture. It has various conductor sizes available depending on the power needs and diameter of the intended application.
This document provides product specifications for KSR self-regulating heating cables intended for snow and ice melting applications. The cables feature a nickel-plated copper bus wire, semiconductive heating matrix, fluoropolymer insulation, and tinned copper braid. They are designed to withstand direct burial in concrete and automatically regulate heat output in response to surrounding temperatures from -60°C to 121°C. The document also lists electrical characteristics, power output curves, accessories, and certification information for easy design and installation of snow melting systems using KSR cables.
This document provides product specifications for KSR self-regulating heating cables intended for snow and ice melting applications. The cables feature a nickel-plated copper bus wire, semiconductive heating matrix, fluoropolymer insulation, and tinned copper braid. They are designed to withstand direct burial in concrete and automatically adjust heat output in response to surrounding temperatures from -60°C to 121°C. The document also lists electrical characteristics, power output curves, accessories, and certification information for easy design and installation of snow melting systems using KSR cables.
This document summarizes the specifications and characteristics of HHE series low ohm power resistors from HTR-India. Key details include:
- Power ratings from 4W to 10W depending on resistance value and operating temperature
- Applications in power tools, automotive equipment, frequency converters, and power modules
- Resistance range from 0.003 ohms to 2 ohms with tolerances from ±0.25% to ±5%
- Operating temperature range of -55°C to +170°C with derating curves provided
- Electrical and environmental testing qualifications including temperature cycling, humidity, vibration, and power cycling
This document describes low ohm power resistors in the HBE series from HTR. The resistors are open frame electron beam welded components available in resistance values from R0002 to R005. They have power ratings from 2W to 7W at temperatures from 70C to 100C and are qualified for automotive and power applications requiring high current capability. The document provides details on specifications, performance characteristics, packaging, and ordering information.
New Magnetodielectric Materials for Magnetic Flux ControlFluxtrol Inc.
http://fluxtrol.com
Magnetodielectric materials play an important role in improvement of induction systems for heat treatment, brazing, soldering, sealing and other technologies. This presentation is a continuation of the report made at HIS-01. Current report shows the results of development of new magnetodielectric materials for magnetic flux control and intensive study of their properties.
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering, and packaging for bulk orders of 1500 pieces per box.
This document provides information on HHE series low ohm power resistors from HTR-India. It describes the physical and electrical specifications including power ratings from 5W to 10W, resistance values from 0.003 ohms to 0.2 ohms, operating temperature range from -55°C to 170°C, and tolerances from ±0.25% to ±5%. It also provides guidelines on mounting, soldering profiles, and packaging for bulk shipment.
High
End RTP Production System
For 200 mm / 300 mm wafer size
For 180 nm, 130 nm, and 100 nm technology
Processes
Implant activation
S/D
Ultra
Shallow Junction Formation
TiSi
2 , CoSi 2 processes
Dry oxides, oxynitrides
Steam applications
STI liner oxides
Sidewall oxides
Thin gate oxides
PSG and BPSG reflow processes
Others
This document describes a versatile heating cable that is factory terminated and can be used for freeze protection and temperature maintenance even in corrosive environments. The heating cable has PTFE insulation and outer jacket and can operate at temperatures up to 260°C. It is highly flexible, resistant to chemicals and steam, and easy to install on complex shapes. Applications include heat tracing on tanks, vessels, filters, satellite dishes, and more.
This document provides information on Thorne and Derrick's Type ELK-Q heating cable, which can operate at temperatures up to 900°C. The cable has quartz textile insulation, a nominal voltage of 230V, and an output of around 175W/m. It is highly flexible and has a minimum bending radius of 5 times its diameter. Applications include heat tracing on glass, quartz and ceramic, and high output laboratory and research devices. Safety standards and technical specifications are also listed.
This document describes a factory terminated heating cable that can be used for radiant heating applications up to 600°C. The cable has advantages like being hermetically sealed, highly robust, moisture proof, and having higher chemical resistance and working temperatures compared to other cables. It can be used in applications that require moisture proof heating at high outputs and temperatures, being immersed in fluids, and for heat tracing on piping in chemical and petrochemical industries. The manufacturer provides engineering services from initial design through commissioning for turnkey heating projects.
SmalTec International is the world’s leading manufacturer of micromachining equipment for aerospace, communications, medical, automotive, optics, nanotechnology and other innovative industries.
Cyclotron Co., Ltd is a leading Russian producer of cyclotron radioisotopes and radiation sources. It operates two cyclotrons that produce over 20 radionuclides used in scientific research, industry, nuclear medicine, and space projects. The company has developed technologies for producing generators, calibration sources, and other products and has licenses and certificates to safely transport radioactive materials.
LLC Functional Food Products was registered in 2011 in Obninsk, Russia to develop functional food products using prebiotic complexes based on the latest scientific research. The goal is to prevent diseases related to improper nutrition by introducing new desserts with complex prebiotics into people's diets. These products are aimed at adjusting contemporary eating habits to improve public health and living standards. The company's innovative products contain several specially selected prebiotic substances and plant extracts to improve digestive health and address other specific issues like energy metabolism or organ function.
CJSC VITASOL is the largest Russian producer of premixes, mineral and vitamin mixes for animals. It has a large production facility on 2 hectares with 5 production lines, storage, and quality testing laboratories. It employs experts in biochemistry, animal nutrition, and veterinary medicine to produce over 110 formulations of concentrated premixes, 75 mineral mixes, and 60 vitamin mixes. The company exports its products to 4 other countries and ensures high quality and shelf life through strict production standards and control.
CJSC Econ develops projects aimed at increasing the efficiency of organic fuel consumption and manufacturing functional and structural ceramics. Their priority is increasing energy efficiency as Russia's energy intensity exceeds Europe by 3-4 times. Econ produces oxygen gas analyzers that optimize fuel combustion, saving up to 5% of fuel and reducing emissions by 40%. The analyzers have a payback period of less than a year. Econ also develops solid electrolyte sensors and manufactures various ceramics like zirconium dioxide for domestic industries.
CJSC Olex is a supplier of Siberian larch timber and wood products established in 1995 with two processing plants in the Kaluga region of Russia. The company sources raw timber from the Komi Republic and Eastern Siberia to produce floorboards, terrace boards, wall panels, weatherboards and other wood products for construction and home applications. CJSC Olex exports products to partners in Latvia, Germany, Ukraine, and France.
The Center for Promotion of the Laser and Innovation Technologies of Kaluga Region was established in 2008 through a Russia-Germany partnership. It aims to promote laser technologies in the Kaluga region through training specialists, advising local companies, and facilitating technology transfers. The Center provides laser welding, cutting, and surface treatment services using various laser systems and also offers training programs.
Alcotek is a leading Russian producer of aluminum composite panels (ACP) located near Moscow. It produces 100,000 square meters of panels per month in various colors and textures for use in building facades. ACP panels are lightweight, flexible, durable, and offer insulation and design benefits over traditional facade materials. Alcotek has provided over 6 million square meters of panels for an array of building types across Russia over its 7 years in business.
2. Company profile
FEAL-Technology was founded in 2002 by experts in
metallurgy of precision alloys and instrument
engineering.
Within the 10-year period of the Company's existence,
an immense amount of research and development work
has been done in various industries.
The market strategy is aimed at creation of finished
products and systems using amorphous alloys,
manufacturing application and delivery to end users.
3. Thin-film heaters for agriculture
Features:
Heaters consist of a resistive
polymetallic band in an
amorphous state (without
a crystal lattice), placed
in a layer of polyethylene
terephthalate. The product’s
distinctive features are high
flexibility, high heating
capacity, resistance to weather
extremes, mechanical,
aggressive chemical and other
external factors.
4. Thin-film heaters for agriculture
Advantages:
A record heating capacity resulting in super-high
efficiency factor
Zero waiting time (turn on and enjoy the heat
immediately)
Easy-to-install device (can be installed in any existing
facility, including antiquated)
The large share of infrared component in the heat flow
allows for spot heating instead of wasting heat on vast
areas of a farm structure
Easy in service and long life (cleaned by conventional
methods)
Electric shock safety (operating voltage 12/36 volt) ,
hence no risk in wet environment
6. A set of equipment for heating of seats on
stands at sports and cultural-public facilities
Technical features:
A viewing stand heating system for up to 48 seats consists
of seat heater pads, 35x40 cm – 48 pcs
Wiring and connectors for plugging 1 to 48 seat heater
pads to the power circuit.
Each seat heater pad has a cable with a socket-type
connector.
Power cabinet with a 12 V transformer and overload
protection
7. A set of equipment for heating of seats on
stands at sports and cultural-public facilities
Competitive features:
The system is easy-to-install (can be installed by a staff
electrician on any type of existing facilities);
High heating capacity and instantaneous operation;
Simple maintenance and high reliability;
Low power consumption;
No risk of electric shock (operating voltage 12 to 36 V)
Zero hazard;
And, last but not least, the seat heater increases the
comfort and attracts more sports fans to stadiums which
adds to the sport’s/team’s popularity plus improves the
company’s financial performance.
Our seat heater is unique, because, currently, we are not
aware of similar innovative applications used anywhere
else in the world.
8. A set of equipment for heating of seats on
stands at sports and cultural-public facilities
Application areas:
Seat heaters are designed to increase attendance of
public events held in open stadiums and arenas,
including hosting ice hockey games.
Possibility of stationary installation.
9. Special-purpose heaters for operation
in extreme conditions
Technical features:
The heating element is made of Al-Si-Fe alloy flat bar
used as a radiator, coated in a cellular thermoplastic
jacket (foamed polyurethane).
Effective heating is ensured by the use of high resistance
amorphous ribbon
A thermo-switch activated at pre-set temperature 100 to
120 degrees Celsius is optional.
The seat heater is intended for use at temperatures in the
interval from -60 to +80 degrees Celsius
Max operating temperature of the heater surface – 120
degrees Celsius
Net weight of the heating element – 1.3 kg/sq. meter
Feed voltage – per customer’s request.
10. Special-purpose heaters for operation
in extreme conditions
Advantages:
Record heating capacity up to 3000 W/sq. meter
High power efficiency
Zero waiting time
High resistance to a wide range of outside factors
Supplies from 1 piece of equipment – to order
11. Special-purpose heaters for operation
in extreme conditions
Applications:
These were developed specially for the RF Ministry of
Defense and for operation in the conditions of the far
north.
They are used in a wide range of exposure to climatic,
mechanical, aggressive and special factors.
12. A system of mark identification consisting of
amorphous ribbon with preset hysteresis loop
parameters
Features:
A system of mark identification consisting of amorphous
ribbon with preset hysteresis loop parameters is a hardware
complex designed for location of hidden markers (marks) at
the preset distance, for their identification and, depending on
assigned tasks, for sending of a signal to actuating devices
(signaling, sorting, interlocking, etc.)
The design is desktop. A version for protection of one or
more passages may be available.
The system is completed with a set of original invisible
markers (the size is to be coordinated with a Customer).
13. A system of mark identification consisting of
amorphous ribbon with preset hysteresis loop
parameters
Advantages:
The system allows for remote recognition, protection
and sorting of segmented subjects.
14. A system of mark identification consisting of
amorphous ribbon with preset hysteresis loop
parameters
Applications:
The system can be used by businesses seeking the
ways to identify own authentic produce or goods
supplied by specific vendors, and also as protection
against piracy. Potential customers are manufacturers
of biological and pharmaceutical products, defense
contractors, airspace and service companies.
Ensures confidentiality of the work flow, including
control of documents and other items of limited access
Scanning & Verification of documents authenticity
(proximity badges, tickets, etc.),
15. Amorphous alloys
Chief characteristics of Co and Fe based amorphous alloys produced by magnetic annealing method
Alloy’s outstanding features A 183 A 179 A 172 A 173 A 170 А 200 А 186 А 225
Tesla magnetic flux density (B10) 0.75 0.66 0.60 0.58 0.55 1,20 0.9 1,21
Coercive field strength
0.015 0.003 0.003 0.003 0.002 0.015 0.025 0.026
of polarization jHc
Permeability at 10 KHz 10000 50000 70000 80000 100000 30000 2200 2000
Permeability at 1 MHz 2000 3000 3000 3200 3500 2500,00 1800,00 1500
Max permeability m MAX, 103 500 800 1000 1000 1000 600 1000 200
Specific loss, P 0.2 Watt/kg
1.5 – 2 1 – 1.5 0.5 – 1 0.5 – 1 0.5 – 1 1,5 2 2
at 10 KHz
Corelosses, P 0.2 Watt/kg
30–40 20–30 20–25 20–25 20–25 30–40 45–55 100
at 100 KHz
Crystallization Temperature,
525 510 520 525 530 530 470 530
Celsius
Curie temperature, Celsius 350 265 235 225 200 570 430 350
Density, g/cu cm 7,7 7,7 7,7 7,7 7,7 7,3 7,7 7,3
Squareness flat loop, max 0.07 0.05 0.1 0.15 0.1 0,1 0,03 0,02
Squareness flat loop , min 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0,9
Saturation magnetostriction, 10 (-7) 10 2 -1 -1 1 20 0,5 10
Electrical resistivity, megohm 1,3 1,3 1,3 1,3 1,3 1,3 1,3 1,3
18-25 +- 3
Thickness
mcm mcm
+- 0,15
Width 3-20 mm
mm
16. Nontrivial orders
Which applications were considered:
Heating fuel;
Heating special equipment (seats, mirrors, batteries);
Heating medical operating tables and couches;
Heating street survey mirrors;
Heating atmospheric probes;
Heated dog kennels;
Bags heated;
Heating drinkers.
17. It makes no difference to us
whether the order is a small lot.
Similarly, we treat all challenges as
equally serious and deserving our effort.
Feal-Technology
248033, Kaluga, Akademicheskaya St., 2
+7 (4842) 548-948, 750-207, 728-037
feal@feal.ru
www.feal.ru