This document provides information on EXHEAT Standard Products for industrial heating applications. It summarizes EXHEAT's product range including flameproof air warmers, convector heaters, fan heaters, immersion heaters, and enclosure heaters. The products are certified for use in hazardous areas and are suitable for applications in industries like chemical plants, offshore installations, and fuel servicing areas.
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 R...Thorne & Derrick UK
The RFA-C flameproof core immersion heater is designed for hazardous areas and offers a heating solution for applications requiring low heat density, such as heating oil. The removable cartridge element can be inspected without draining the system. The heater consists of a single element core housed in a flameproof terminal enclosure and mounted flange. It is certified to ATEX standards and suitable for ambient temperatures from -40°C to +40°C.
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 FP...Thorne & Derrick UK
The FP range of flameproof rod-type immersion heaters can be customized to suit clients' process requirements. They are suitable for heating non-corrosive liquids and gases and feature ATEX certification. The heaters can be mounted horizontally via a threaded boss or flange and include over-temperature protection as standard. Typical applications include pre-heating oil/water, processing equipment, cleaning/rinsing tanks, heating medium, and boiler equipment.
The document describes the Hazloc Heaters HUH2 series of industrial-grade hydronic unit heaters. Key points:
- The HUH2 heaters are designed for hazardous and severe-duty locations, especially for the oil & gas industry.
- They have a rugged design and can operate at pressures up to 400 PSIG. Six sizes are available in single-pass or multi-pass configurations.
- The heaters can be used with steam, hot water, glycol, or other non-lethal fluids. The core is removable and the connections can be reversed.
- Hazloc Heaters provides a sizing and selection program to help customers choose the appropriate heater for their needs
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 RF...Thorne & Derrick UK
The EXHEAT 'RFA' flameproof rod-type immersion heaters are suitable for installation in hazardous areas where flammable gases are present. They are designed to heat process liquids and gases in tanks, vessels, and other equipment. The heaters feature a lightweight and weatherproof cast aluminum enclosure certified for hazardous areas. They can be mounted using a threaded boss or flange and include overtemperature protection and choices for built-in sensors.
FLR Radiators Exheat Flameproof Fan Heaters - Hazardous Area Industrial Air W...Thorne & Derrick UK
This document provides information on the FLR range of flameproof area radiators designed for hazardous areas where airborne dust is a concern. The radiators can be used in ammunition depots, explosive stores, chemical plant warehouses, and other similar applications. They have robust construction, are certified to IP66 weatherproof standards, and have a preset surface temperature control thermostat and over-temperature cut-out to ensure safety. The radiators come in 1kW, 2kW and 3kW models of varying dimensions and weights.
LMK Thermosafe Hazardous Area Drum & IBC Product OverviewThorne & Derrick UK
LMK Thermosafe introduces new hazardous area certified induction drum and container heaters, as well as flexible heating jackets. This includes the THERMOSAFE induction drum heater, lifting frame, and top hat accessory. A new FARATHERM base heater provides heat to container bases. The INTELIHEAT jacket safely heats IBCs in hazardous areas. LMK also offers a range of stock and custom heating jackets.
FCR Convector Heater Exheat Flameproof Fan Heaters - Hazardous Area Industria...Thorne & Derrick UK
The document describes the EXHEAT FCR range of convector heaters, which are designed to provide space heating in hazardous areas where flammable gases are present. The heaters have ATEX certification, come in various power outputs from 1 to 3 kW, and can be wall or floor mounted. They use finned stainless steel heating elements and have an optional built-in thermostat for temperature control.
This document provides installation and safety instructions for an electric forced-air heater designed for use in hazardous locations. Key points include:
- The heater must be installed by a qualified electrician in accordance with hazardous location codes and standards.
- It is only approved for use in gas/dust atmospheres specified on the nameplate and may not be modified from the original design.
- Proper mounting, clearances, and maintenance are required to ensure safe operation and compliance with certification listings.
- Warnings are given regarding electrical shock hazards, thermal hazards, and following installation/operation guidelines.
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 R...Thorne & Derrick UK
The RFA-C flameproof core immersion heater is designed for hazardous areas and offers a heating solution for applications requiring low heat density, such as heating oil. The removable cartridge element can be inspected without draining the system. The heater consists of a single element core housed in a flameproof terminal enclosure and mounted flange. It is certified to ATEX standards and suitable for ambient temperatures from -40°C to +40°C.
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 FP...Thorne & Derrick UK
The FP range of flameproof rod-type immersion heaters can be customized to suit clients' process requirements. They are suitable for heating non-corrosive liquids and gases and feature ATEX certification. The heaters can be mounted horizontally via a threaded boss or flange and include over-temperature protection as standard. Typical applications include pre-heating oil/water, processing equipment, cleaning/rinsing tanks, heating medium, and boiler equipment.
The document describes the Hazloc Heaters HUH2 series of industrial-grade hydronic unit heaters. Key points:
- The HUH2 heaters are designed for hazardous and severe-duty locations, especially for the oil & gas industry.
- They have a rugged design and can operate at pressures up to 400 PSIG. Six sizes are available in single-pass or multi-pass configurations.
- The heaters can be used with steam, hot water, glycol, or other non-lethal fluids. The core is removable and the connections can be reversed.
- Hazloc Heaters provides a sizing and selection program to help customers choose the appropriate heater for their needs
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 RF...Thorne & Derrick UK
The EXHEAT 'RFA' flameproof rod-type immersion heaters are suitable for installation in hazardous areas where flammable gases are present. They are designed to heat process liquids and gases in tanks, vessels, and other equipment. The heaters feature a lightweight and weatherproof cast aluminum enclosure certified for hazardous areas. They can be mounted using a threaded boss or flange and include overtemperature protection and choices for built-in sensors.
FLR Radiators Exheat Flameproof Fan Heaters - Hazardous Area Industrial Air W...Thorne & Derrick UK
This document provides information on the FLR range of flameproof area radiators designed for hazardous areas where airborne dust is a concern. The radiators can be used in ammunition depots, explosive stores, chemical plant warehouses, and other similar applications. They have robust construction, are certified to IP66 weatherproof standards, and have a preset surface temperature control thermostat and over-temperature cut-out to ensure safety. The radiators come in 1kW, 2kW and 3kW models of varying dimensions and weights.
LMK Thermosafe Hazardous Area Drum & IBC Product OverviewThorne & Derrick UK
LMK Thermosafe introduces new hazardous area certified induction drum and container heaters, as well as flexible heating jackets. This includes the THERMOSAFE induction drum heater, lifting frame, and top hat accessory. A new FARATHERM base heater provides heat to container bases. The INTELIHEAT jacket safely heats IBCs in hazardous areas. LMK also offers a range of stock and custom heating jackets.
FCR Convector Heater Exheat Flameproof Fan Heaters - Hazardous Area Industria...Thorne & Derrick UK
The document describes the EXHEAT FCR range of convector heaters, which are designed to provide space heating in hazardous areas where flammable gases are present. The heaters have ATEX certification, come in various power outputs from 1 to 3 kW, and can be wall or floor mounted. They use finned stainless steel heating elements and have an optional built-in thermostat for temperature control.
This document provides installation and safety instructions for an electric forced-air heater designed for use in hazardous locations. Key points include:
- The heater must be installed by a qualified electrician in accordance with hazardous location codes and standards.
- It is only approved for use in gas/dust atmospheres specified on the nameplate and may not be modified from the original design.
- Proper mounting, clearances, and maintenance are required to ensure safe operation and compliance with certification listings.
- Warnings are given regarding electrical shock hazards, thermal hazards, and following installation/operation guidelines.
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 FP-...Thorne & Derrick UK
The EXHEAT FP range offers flameproof removable single and multi-core immersion heaters for hazardous area applications where low heat density is required. The element can be withdrawn without draining the system. The standard heater consists of an element or multiple cores fitted into a mounting flange with an explosion-proof terminal enclosure protecting the electrical connections.
This document provides information on the AEU1 series of explosion-proof electric air heaters manufactured by Thorne and Derrick. The AEU1 heaters are suitable for hazardous locations and certified to ATEX, IECEx, and EAC Ex standards. They are designed to provide primary or supplementary heating in hazardous areas classified as gas or dust atmospheres. The document provides specifications, performance data, ordering information, and general details on the construction and certifications of the AEU1 heaters.
This document describes the HygroFlex5-EX series of intrinsically safe humidity and temperature transmitters. The transmitters measure relative humidity and temperature in hazardous areas and can output additional calculated parameters. They have a robust aluminum housing, interchangeable stainless steel probes, and do not require an intrinsically safe power supply. The transmitters and probes are certified for use in explosive atmospheres.
This document provides information on self-regulating parallel heating cables from eltherm. It describes the types of heating cables available, including low (ELSR-N, ELSR-LS), medium (ELSR-M, ELSR-W), and high (ELSR-H) temperature options. Application areas covered include frost protection and temperature maintenance for pipes, vessels, tanks, and other industrial uses. The document also discusses cable designs, technical specifications, installation guidelines, and accessories. Product certifications and approvals for hazardous areas are noted.
Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex - ...Thorne & Derrick UK
EXHEAT manufactures three types of ATEX certified flameproof thermostats for use in hazardous areas: the AFT for liquid, gas, and air applications with external adjustment; the RFT for mounting in process tanks and vessels containing liquids or gases; and the HFT for temperature control of work or storage areas in conjunction with hazardous area heaters. All three thermostats are ATEX certified for zone 1 or 2 gas areas and zone 21 or 22 dust areas, have IP67 weatherproof enclosures, and temperature ranges from -60°C to +60°C.
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
This document provides information on climate control components and systems from ITM - Heating. Cooling. Thermal Control, including:
- A range of heating and cooling products for electrical enclosures using technologies like PTC heating, thermoelectric cooling, and filter fans.
- Accessories like hygrostats, thermostats, and dualstats for temperature and humidity control.
- Custom solutions and certifications to ISO standards.
- Contact and product information is provided for locations in the UK and Germany.
SOR® is a manufacturer of high-quality pressure and tempreature switches for industrial service. They serve a global market of oil and gas, chemical, petrochemical, and power industries through a network of independent sales representatives. Their products are suitable for a broad range of safety systems, control processes, and related applications.
EXHEAT - Hazardous Area Process Heaters (Zone 1 & Zone 2) - BrochureThorne & Derrick UK
EXHEAT is a leading manufacturer of electric heaters and control systems for hazardous and non-hazardous areas. They custom design products that meet precise client needs for heating and temperature control. EXHEAT has extensive experience in electrical, mechanical, and thermal design for equipment used in industries like oil, gas, and petrochemicals. Their equipment is manufactured in ISO certified facilities and certified by international standards organizations for hazardous area installation. EXHEAT aims to provide reliable, customized solutions and high quality service worldwide.
1800 °C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. For More Information Please Logon http://goo.gl/wWM2hi
This document provides information on various self-regulating and power-limiting electric heating cables, mineral insulated cables, instrument tubing bundles, and steam heating products for freeze protection and temperature maintenance. It describes available product lines for different temperature ranges and exposure conditions, as well as accessories. Key information included are operating temperatures, voltage ranges, watt densities, and worldwide approvals.
This document specifies an incubator for bacteriological analysis with a stainless steel interior chamber, temperature range of 35-60 degrees Celsius controlled within 1 degree accuracy, digital display, 3 shelves, glass door, and includes a thermometer for measuring the interior temperature.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/Xa4Je1
Overview of Abtech's range of hazardous area junction boxes, Ex-rated lighting, hazardous location high voltage solutions and much more. Fully ATEX and IECEx compliant
Bench top muffle furnaces are excellent for quantitative analysis and organic and inorganic ashing applications.For More Information Please Logon http://goo.gl/J1R4Yf
This document summarizes a benchtop 1750°C muffle furnace. It features a digital programmable controller, ceramic insulation for high energy efficiency, and safety features like a door switch. The furnace has a 8"x8"x8" chamber that can heat to 1750°C and includes a ceramic shelf. It is suitable for laboratory applications requiring controlled high temperature heating.
This document provides specifications for a laboratory incubator model ACM-I03428LA made by Technocracy Pvt. Ltd. It can accommodate a wide range of applications through precise temperature control. Triple wall construction allows for uniform air circulation to maintain temperature uniformity from 2°C to 90°C. It has features like PID temperature control, data storage, and alarm limits. Intended applications include biochemical studies, bacterial culturing, and pharmaceutical quality control.
FWDT Air Warmers Exheat Flameproof Fan Heaters - Hazardous Area Industrial Ai...Thorne & Derrick UK
The document provides product information for the EXHEAT 'FWDT' range of flameproof air warmers designed for heating small work or storage areas in hazardous zones where flammable atmospheres are present. The air warmers come in various wattage models from 500 to 2000 watts and temperature ratings of T2, T3, and T4. They are ATEX and IECEx certified, weatherproof to IP66/67, and suitable for floor or wall mounting with adjustable temperature controls. Typical applications include aircraft hangars, fuel servicing areas, chemical plants, offshore installations, and more.
FWD Air Warmers Exheat Flameproof Fan Heaters - Hazardous Area Industrial Ai...Thorne & Derrick UK
The document describes EXHEAT's FWD range of air warmers designed for heating small work or storage areas in hazardous zones where flammable atmospheres are present. The air warmers come in steel or stainless steel enclosures, are certified to ATEX directives, and suitable for temperatures from -60 to 60 degrees Celsius. They are intended for applications such as aircraft hangars, fuel servicing areas, chemical plants, and offshore installations.
Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex - ...Thorne & Derrick UK
EXHEAT manufactures three types of flameproof thermostats certified for use in hazardous areas: the AFT for liquid, gas, and air applications with external adjustment; the RFT for controlling temperatures in process tanks and vessels; and the HFT for controlling temperatures of work or storage areas in conjunction with air heaters. All three models are ATEX certified for zone 1 or 2 gas areas and zone 21 or 22 dust areas, have IP67-rated enclosures, and temperature ranges from -60°C to +60°C.
Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex - ...Thorne & Derrick UK
EXHEAT manufactures three types of ATEX certified flameproof thermostats for use in hazardous areas: the AFT for liquid, gas, and air applications with external adjustment; the RFT for controlling temperatures in process tanks and vessels; and the HFT for controlling temperatures of work or storage areas in conjunction with air heaters. All three thermostats are ATEX certified for zone 1 or 2 gas areas and zone 21 or 22 dust areas, have IP67 weatherproof enclosures, and temperature ranges from -60°C to +60°C.
This document provides information about a PTFE insulated heating cable manufactured by Thorne and Derrick. The cable is factory terminated and can be used for freeze protection and temperature maintenance in hazardous areas and explosive atmospheres. It has advantages like high chemical and mechanical resistance, a high working temperature up to 260°C, and flexibility for complex installations. Applications include heat tracing of tanks, vessels, pipes and other equipment.
Exheat Flameproof Hazardous Area Industrial Immersion Heaters, Zone 1 & 2 FP-...Thorne & Derrick UK
The EXHEAT FP range offers flameproof removable single and multi-core immersion heaters for hazardous area applications where low heat density is required. The element can be withdrawn without draining the system. The standard heater consists of an element or multiple cores fitted into a mounting flange with an explosion-proof terminal enclosure protecting the electrical connections.
This document provides information on the AEU1 series of explosion-proof electric air heaters manufactured by Thorne and Derrick. The AEU1 heaters are suitable for hazardous locations and certified to ATEX, IECEx, and EAC Ex standards. They are designed to provide primary or supplementary heating in hazardous areas classified as gas or dust atmospheres. The document provides specifications, performance data, ordering information, and general details on the construction and certifications of the AEU1 heaters.
This document describes the HygroFlex5-EX series of intrinsically safe humidity and temperature transmitters. The transmitters measure relative humidity and temperature in hazardous areas and can output additional calculated parameters. They have a robust aluminum housing, interchangeable stainless steel probes, and do not require an intrinsically safe power supply. The transmitters and probes are certified for use in explosive atmospheres.
This document provides information on self-regulating parallel heating cables from eltherm. It describes the types of heating cables available, including low (ELSR-N, ELSR-LS), medium (ELSR-M, ELSR-W), and high (ELSR-H) temperature options. Application areas covered include frost protection and temperature maintenance for pipes, vessels, tanks, and other industrial uses. The document also discusses cable designs, technical specifications, installation guidelines, and accessories. Product certifications and approvals for hazardous areas are noted.
Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex - ...Thorne & Derrick UK
EXHEAT manufactures three types of ATEX certified flameproof thermostats for use in hazardous areas: the AFT for liquid, gas, and air applications with external adjustment; the RFT for mounting in process tanks and vessels containing liquids or gases; and the HFT for temperature control of work or storage areas in conjunction with hazardous area heaters. All three thermostats are ATEX certified for zone 1 or 2 gas areas and zone 21 or 22 dust areas, have IP67 weatherproof enclosures, and temperature ranges from -60°C to +60°C.
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
This document provides information on climate control components and systems from ITM - Heating. Cooling. Thermal Control, including:
- A range of heating and cooling products for electrical enclosures using technologies like PTC heating, thermoelectric cooling, and filter fans.
- Accessories like hygrostats, thermostats, and dualstats for temperature and humidity control.
- Custom solutions and certifications to ISO standards.
- Contact and product information is provided for locations in the UK and Germany.
SOR® is a manufacturer of high-quality pressure and tempreature switches for industrial service. They serve a global market of oil and gas, chemical, petrochemical, and power industries through a network of independent sales representatives. Their products are suitable for a broad range of safety systems, control processes, and related applications.
EXHEAT - Hazardous Area Process Heaters (Zone 1 & Zone 2) - BrochureThorne & Derrick UK
EXHEAT is a leading manufacturer of electric heaters and control systems for hazardous and non-hazardous areas. They custom design products that meet precise client needs for heating and temperature control. EXHEAT has extensive experience in electrical, mechanical, and thermal design for equipment used in industries like oil, gas, and petrochemicals. Their equipment is manufactured in ISO certified facilities and certified by international standards organizations for hazardous area installation. EXHEAT aims to provide reliable, customized solutions and high quality service worldwide.
1800 °C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. For More Information Please Logon http://goo.gl/wWM2hi
This document provides information on various self-regulating and power-limiting electric heating cables, mineral insulated cables, instrument tubing bundles, and steam heating products for freeze protection and temperature maintenance. It describes available product lines for different temperature ranges and exposure conditions, as well as accessories. Key information included are operating temperatures, voltage ranges, watt densities, and worldwide approvals.
This document specifies an incubator for bacteriological analysis with a stainless steel interior chamber, temperature range of 35-60 degrees Celsius controlled within 1 degree accuracy, digital display, 3 shelves, glass door, and includes a thermometer for measuring the interior temperature.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/Xa4Je1
Overview of Abtech's range of hazardous area junction boxes, Ex-rated lighting, hazardous location high voltage solutions and much more. Fully ATEX and IECEx compliant
Bench top muffle furnaces are excellent for quantitative analysis and organic and inorganic ashing applications.For More Information Please Logon http://goo.gl/J1R4Yf
This document summarizes a benchtop 1750°C muffle furnace. It features a digital programmable controller, ceramic insulation for high energy efficiency, and safety features like a door switch. The furnace has a 8"x8"x8" chamber that can heat to 1750°C and includes a ceramic shelf. It is suitable for laboratory applications requiring controlled high temperature heating.
This document provides specifications for a laboratory incubator model ACM-I03428LA made by Technocracy Pvt. Ltd. It can accommodate a wide range of applications through precise temperature control. Triple wall construction allows for uniform air circulation to maintain temperature uniformity from 2°C to 90°C. It has features like PID temperature control, data storage, and alarm limits. Intended applications include biochemical studies, bacterial culturing, and pharmaceutical quality control.
FWDT Air Warmers Exheat Flameproof Fan Heaters - Hazardous Area Industrial Ai...Thorne & Derrick UK
The document provides product information for the EXHEAT 'FWDT' range of flameproof air warmers designed for heating small work or storage areas in hazardous zones where flammable atmospheres are present. The air warmers come in various wattage models from 500 to 2000 watts and temperature ratings of T2, T3, and T4. They are ATEX and IECEx certified, weatherproof to IP66/67, and suitable for floor or wall mounting with adjustable temperature controls. Typical applications include aircraft hangars, fuel servicing areas, chemical plants, offshore installations, and more.
FWD Air Warmers Exheat Flameproof Fan Heaters - Hazardous Area Industrial Ai...Thorne & Derrick UK
The document describes EXHEAT's FWD range of air warmers designed for heating small work or storage areas in hazardous zones where flammable atmospheres are present. The air warmers come in steel or stainless steel enclosures, are certified to ATEX directives, and suitable for temperatures from -60 to 60 degrees Celsius. They are intended for applications such as aircraft hangars, fuel servicing areas, chemical plants, and offshore installations.
Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex - ...Thorne & Derrick UK
EXHEAT manufactures three types of flameproof thermostats certified for use in hazardous areas: the AFT for liquid, gas, and air applications with external adjustment; the RFT for controlling temperatures in process tanks and vessels; and the HFT for controlling temperatures of work or storage areas in conjunction with air heaters. All three models are ATEX certified for zone 1 or 2 gas areas and zone 21 or 22 dust areas, have IP67-rated enclosures, and temperature ranges from -60°C to +60°C.
Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex - ...Thorne & Derrick UK
EXHEAT manufactures three types of ATEX certified flameproof thermostats for use in hazardous areas: the AFT for liquid, gas, and air applications with external adjustment; the RFT for controlling temperatures in process tanks and vessels; and the HFT for controlling temperatures of work or storage areas in conjunction with air heaters. All three thermostats are ATEX certified for zone 1 or 2 gas areas and zone 21 or 22 dust areas, have IP67 weatherproof enclosures, and temperature ranges from -60°C to +60°C.
This document provides information about a PTFE insulated heating cable manufactured by Thorne and Derrick. The cable is factory terminated and can be used for freeze protection and temperature maintenance in hazardous areas and explosive atmospheres. It has advantages like high chemical and mechanical resistance, a high working temperature up to 260°C, and flexibility for complex installations. Applications include heat tracing of tanks, vessels, pipes and other equipment.
STW Air Warmer - Exheat Flameproof Fan Heaters - Hazardous Area Industrial Ai...Thorne & Derrick UK
The EXHEAT STW range of heaters are designed for heavy-duty industrial applications. They have a robust, powder coated steel construction and weatherproof casing, making them suitable for environments like workshops, storage units, and pump stations. The heaters are available in 1kW, 2kW, and 3kW ratings and can include optional integrated or remote thermostats for temperature control.
Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex -...Thorne & Derrick UK
The document describes the FXT range of air sensing thermostats. The thermostats can be mounted vertically and have the option to be sold with or without cables. They have a compact design, operate in temperatures from -60°C to 80°C, and are ATEX and IECEx certified for safety. The thermostats come in three models that turn on and off at different temperature thresholds and all have a fuse trip temperature of 76°C ± 3°C.
FEAM enclosures are suitable for Hazardous Area Enclosures Zone 1 & Zone 2. T&D are distributors for the FEAM range of Hazardous Area Enclosures for installation in potentially explosive atmospheres - FEAM enclosures are specified for hazardous areas Zone 1 and Zone 2 (Gases) with international certifications according to ATEX, Inmetro, GOST-R, GOST-K, IECEx and CE.
ATEX, IECEx, Inmetro, GOST-R, GOST-K, NEC505 Certified Enclosures.
Hazardous Area Enclosures : Zone 1 & Zone 2 (Gases) - Zone 21 & Zone 22 (Dusts).
Hazardous Area Classification
Group: II Category: 2G - 2D
Inteliheat 2D-Z1 Hazardous Area Drum Heater Jacket - ATEX Zone 1 & Zone 2 Dru...Thorne & Derrick UK
This document provides information about an ATEX and IECEx Zone 1 and 2 rated heating jacket for 200L drums. The heating jacket uses a proprietary design with custom elastomer and silicone coated glass cloth materials and high density fibreglass insulation to safely heat drums up to 200L in hazardous areas. It operates on single phase AC power up to 240v and 50/60Hz with a current draw up to 3A and power consumption up to 720W.
FXE Finned Extruded Enclosure Heater Exheat Flameproof Fan Heaters - Hazardou...Thorne & Derrick UK
The 'FXE' heater is designed for hazardous areas and provides frost protection, temperature control and anti-condensation. It has a compact design, delivers constant power output, and comes with a mounting bracket and 1.5m lead. It is ATEX certified and suitable for ambient temperatures between -50°C and +80°C. Typical applications include control panels, instrumentation cabinets, and preventing condensation or temperature fluctuations.
When, where and why to install trace heating. A little information on the different heat trace applications and the different types of trace heating installation areas.
For more information please visit www.eshltd.com
Isopad Flexible Heated Hoses, Gas Analyser Hose, Heavy Oil Transfer Hoses & B...Thorne & Derrick UK
The document describes a heated hose for liquid and gaseous media. It has a maximum operating temperature of 200°C. The hose consists of a smooth PTFE inner hose with stainless steel braiding and meta-aramid fiber insulation. Resistance heating cables provide even heat distribution and Pt100 sensors allow for temperature control. Special designs are available upon request to suit various performance levels and environmental conditions.
Cross Technical Solutions is an Irish company Specialising in the design, Installation, Service and Maintenance of Specialist Refrigeration systems.
Established with the Pharmaceutical & Food Industry and specialist refrigeration fields in mind we can provide a complete ‘Turn-Key’ package using in-house engineers and the latest design and drawing packages.
Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex - ...Thorne & Derrick UK
The document provides information on EXHEAT's HIH range of flameproof instrument transmitter enclosures. The enclosures are designed to accommodate various process transmitters and come with features like stainless steel construction, IP66 ingress protection, and ATEX certification. They allow hazardous area temperature measurement and accommodate most major brands of head mounted transmitters. Various models are listed that include instrument housings, temperature transmitter assemblies with analog or digital transmitters, and options for configuration, input, display, and certification.
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
Exheat FP Flameproof Cast Line Heaters Atex, Iec Ex & Csa Zone 1 & Zone 2 - ...Thorne & Derrick UK
The FP Cast range of line heaters provides an effective and costly heating solution for constant flow liquids or gases without requiring a pressure vessel. The heaters feature an electric heating element and indirect process heating coil embedded in marine-grade aluminum castings, providing excellent heat transfer properties with low surface temperatures. However, the design is not suitable for applications requiring precise temperature control of varying flows.
This document provides information on Thorne and Derrick's Type ELK-Q heating cable, which can operate at temperatures up to 900°C. The cable has quartz textile insulation, a nominal voltage of 230V, and an output of around 175W/m. It is highly flexible and has a minimum bending radius of 5 times its diameter. Applications include heat tracing on glass, quartz and ceramic, and high output laboratory and research devices. Safety standards and technical specifications are also listed.
This document describes a factory terminated heating cable that is suitable for trace heating applications up to 450°C. The cable has advantages like factory termination, protective braiding, flexibility, and high output. It can be used for heating apparatus, appliances, systems, and laboratory applications. The cable comes in various heated lengths with corresponding nominal outputs and item numbers.
Ankersmid regulated heated line datasheet 0a1-cbiss
The Ankersmid heated lines are used to transfer gaseous samples from measurement points to testing equipment at temperatures between 200°C and 250°C without loss of heat. The heated lines ensure gas components remain above their dew point to eliminate condensation risks. The lines are manufactured according to specifications with integrated heaters and temperature sensors for even heat distribution and no cold spots.
Similar to Exheat Flameproof Fan Heaters - Hazardous Area Industrial Air Warmers - Brochure (20)
This document provides contact and location information for ROTRONIC Instrument Corp. and its subsidiaries and partners worldwide. ROTRONIC is a Swiss-owned company with headquarters in Switzerland and subsidiaries across Europe, North America, Asia, and elsewhere. Contact information is provided for ROTRONIC's offices and representatives in Switzerland, Germany, France, Italy, the UK, USA, Canada, Singapore, China, and elsewhere. The document also provides ROTRONIC's warranty terms and conditions.
This document provides a product list and codes for WC flushing systems, urinal controls, automatic taps, showers, water management products, and accessories from DVS and Franke. It includes no-touch WC flushing kits that are stylish and deliver reliable performance, as well as urinal control systems that ensure clean washrooms while saving substantial water. The list provides over 100 product codes, descriptions, and individual part options across multiple washroom categories.
Cistermiser Water Efficient Washroom Controls - Specification Catalogue 2016Thorne & Derrick UK
The Hydraulic Valve is an automatic urinal flush control valve that uses a patented hydraulic mechanism to reduce water waste. It ensures the auto-flush cistern only fills and flushes when the washroom is in use. Over half a million have been installed and it provides reliable flushing without electricity or batteries. It also offers a hygiene flush option to prevent odors during periods of non-use.
Wolf - Hazardous Area Portable & Temporary Lighting - BrochureThorne & Derrick UK
The document discusses Wolf Safety's range of portable and temporary lighting and power distribution systems certified for use in potentially explosive atmospheres. The range includes portable lighting such as handheld torches, headtorches, and warning lamps powered by batteries, as well as temporary lighting fixtures and floodlights and temporary power distribution equipment. Wolf Safety manufactures hazardous area lighting certified for zones 0, 1, 2, 20, 21, and 22 to ensure safety wherever explosive gases, vapors, mists or dusts may be present.
VEGA – Level, Point Level & Pressure Measurement Sensors, Instruments & Trans...Thorne & Derrick UK
This document provides an overview of VEGA's plics modular instrumentation concept and level and pressure measurement products. The plics concept uses prefabricated components to assemble customized instruments for each customer's application requirements. Key VEGA level measurement products described include the VEGAPULS radar sensors for non-contact level measurement of liquids and solids, and the VEGAMIP microwave barriers for non-contact point level detection of liquids and solids. The document also outlines VEGA's global presence and commitment to developing innovative, easy to use measurement technology.
Thermon – Heat Tracing Cables (Self Regulating, Power Limiting, Constant Watt...Thorne & Derrick UK
Thermon provides complete heat tracing solutions for pipes, vessels, instrumentation, and other process equipment. They offer engineering, design, product selection, installation, training, commissioning, and maintenance services worldwide. Thermon has experience in industries like oil and gas, power generation, and chemical processing and can design customized systems to meet specific application needs.
SIKA is a family-owned German company with over 340 employees that has been developing and producing precision measurement and calibration equipment for over 100 years. They produce a wide range of industrial thermometers, pressure gauges, temperature and pressure sensors, flow meters, and calibration devices. SIKA ensures quality by calibrating products in their own accredited lab and providing expert support to customers worldwide through regional subsidiaries and partners.
SICK AG is a leading manufacturer of sensor technology products with over 5,800 employees worldwide. The document provides an overview of SICK's fluid sensor products, including level sensors, flow sensors, pressure sensors, and temperature sensors. It describes the company's wide product range and comprehensive services. Customers can find product information and order sensors through SICK's online portal.
The Patol analogue linear heat detection cable (LHDC) is designed to detect fires and overheating in areas that cannot support other detection methods. It can detect hot spots along its entire length and trigger alarms. The cable functions by monitoring the resistance of its dielectric insulation, which has a negative temperature coefficient, between the central conductor and outer braid layer. It is used with monitoring devices and can be installed in hazardous areas with intrinsically safe barriers. The cable comes in various outer sheath options for mechanical, chemical, or combined protection, and is suitable for a wide range of applications such as tunnels, conveyors, and industrial facilities.
Murco - Gas Detection (Refrigerant Gas Leak Detectors & Sensors) - Product Br...Thorne & Derrick UK
This document provides information on gas leak detection solutions, including fixed gas detectors, integrated area monitors, gas sensors, and aspirated refrigerant leak detectors. It lists several gas detection products with specifications such as power supply, alarm levels, outputs, housing options, and detectable gases. The detectors can be used to monitor refrigerants, toxins, and other gases in facilities like supermarkets, breweries, and industrial plants.
MSA Gas Detectors – Portable & Fixed Gas Detection - BrochureThorne & Derrick UK
- MSA is a leading manufacturer of safety equipment including supplied air respirators, air-purifying respirators, head, eye, and hearing protection, fall protection equipment, thermal imaging cameras, portable gas detection devices, and fixed gas and flame detection systems.
- They have manufacturing operations on five continents and serve customers in over 140 countries, ensuring customers have access to high-quality safety solutions wherever they are.
- MSA is committed to developing innovative products through testing and evaluation to protect workers' health and safety worldwide.
This document provides a product catalogue for Micronics Flow and Heat Meters. It summarizes their range of portable and permanent flow meters that use non-invasive ultrasonic clamp-on technology. They offer transit time and Doppler flow meters for measuring clean and aerated liquids respectively. Their portable models like the PF330 include data logging and output options. They also provide complementary products like software, heat meters, and permanent models like the U3000/U4000 for wall mounting. Case studies show how their meters help customers in industries monitor energy usage and efficiency.
Krohne Hazardous Area Process Instrumentation Meters Measurement - Product Ov...Thorne & Derrick UK
KROHNE provides a comprehensive range of flowmeters and flow controllers for measuring liquid and gas flows across various industries. Their product portfolio includes electromagnetic flowmeters, mass flowmeters, ultrasonic flowmeters, variable area flowmeters, differential pressure flowmeters, vortex flowmeters, and mechanical and electromagnetic flow controllers. KROHNE has over 90 years of experience in flow measurement and holds over 1,000 patents related to flow products. All of their flowmeters are wet-calibrated for accuracy.
Katronic is a manufacturer of ultrasonic clamp-on flowmeters for measuring flow in pipes. They offer a range of portable and fixed installation flowmeters for pipes from 10mm to 6500mm in diameter. Their flowmeters use ultrasonic transit time technology to measure flow velocity and rate. Katronic prides itself on high quality products and excellent customer service and support.
Kamstrup - Heat Meters & Water Meters Ultrasonic (RHI Compliant MID Class 2 H...Thorne & Derrick UK
This document summarizes Kamstrup's role as a leading provider of intelligent energy and water metering solutions. It discusses how Kamstrup helps utilities optimize operations and make smarter decisions using collected meter data. It also outlines major trends in energy/water and how Kamstrup addresses challenges of cost constraints, environmental pressures, and market competition through innovative products and services.
Itron is a global technology company that provides solutions to help utilities and cities manage energy and water resources more efficiently. Their solutions help utilities lower costs, modernize infrastructure, improve reliability and customer service. Itron offers a wide range of products and solutions for electricity, gas, water and smart cities to help address challenges of growing populations, climate change and resource scarcity. They have extensive experience deploying solutions in over 100 countries.
IFM Electronic - Sensors (Flow, Pressure, Level & Temperature Sensors) - Cata...Thorne & Derrick UK
This document provides an overview of ifm electronic gmbh, a manufacturer of industrial automation technology products. It describes ifm's wide range of over 7,800 sensors, systems, and connectivity solutions. The summary also outlines ifm's global presence with over 70 locations worldwide, commitment to quality and reliability with a 5-year warranty, and history of growth since being founded in 1969.
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf46adnanshahzad
How to Start Up a Company: A Step-by-Step Guide Starting a company is an exciting adventure that combines creativity, strategy, and hard work. It can seem overwhelming at first, but with the right guidance, anyone can transform a great idea into a successful business. Let's dive into how to start up a company, from the initial spark of an idea to securing funding and launching your startup.
Introduction
Have you ever dreamed of turning your innovative idea into a thriving business? Starting a company involves numerous steps and decisions, but don't worry—we're here to help. Whether you're exploring how to start a startup company or wondering how to start up a small business, this guide will walk you through the process, step by step.
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
How to Implement a Real Estate CRM SoftwareSalesTown
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...Neil Horowitz
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...APCO
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
2. EXHEAT Standard Products
EXHEAT Industrial Division offers fast track solutions to industry's wide and varied requirements for
electrical heating systems. All heaters manufactured by EXHEAT for use in Hazardous Areas are
supplied fully certified to meet the latest requirements of the IECEx Scheme, CSA, GOST, CCOE, or
the European ATEX Directive as appropriate.
When the standard range of products does not exactly meet our customer's requirements, EXHEAT
sales engineers and designers will design a custom built Hazardous or Safe Area electric heater.
Close consultation with the customer and years of experience will ensure that our clients procure a
heater that is optimal for their applications.
All EXHEAT heaters are manufactured and stocked in the UK, a selection of stock is also kept at our
regional office in Singapore to facilitate faster delivery time.
EXHEAT Industrial Product Range
, Hazardous Area air warmers, enclosure heaters and industrial convector heaters
• Flameproof radiators, fan heaters, water boilers, immersion heaters and thermostats
• Vented and unvented storage water heaters and vat heaters
Industrial, baptistery and portable immersion heaters
Heating elements rod and core type, trace heating, thermostats, control panels
Flameproof instrument housing and transmitters
3. rct
Ime
IMMERSION HEATERS - pages 16 - 21
LINE HEATERS - pages 13 - 15
9
ti
AIR HEATERS - pages 4 - 12
THERMOSTATS/TRANSMITTER ENCLOSURES - pages 22 & 23
Hazardous Area Process Heat & Control Solutions
4. FWD Flameproof Air Warmers
The FWD range of air warmers is designed for
use in small work or storage areas which are
located in Zone 1 and 2 or Zone 21 and 22
Hazardous Areas where the flammable
atmosphere is a IIA, IIB or IIC Gas Group.
FEATURES
Certified to meet the ATEX Directive 94/9/EC and
IECEx
Fabricated steel enclosure weatherproof to
I P66/67
Temperature classes T2, T3 and T4 available
Suitable for floor or wall mounting
2 x 20mm (plugged) cable entries provided as
standard
Corrosion resistant powder coated finish
Suitable for ambient temperatures from -60°C to
+60°C (subject to conditions to be discussed
with sales engineer)
Individually replaceable heating elements
TYPICAL APPLICATIONS
Aircraft hanger service bays
Fuel servicing areas
Chemical plants
Offshore installations
Battery stores
Gas installations
Containers
Explosive Stores
Paint/solvent stores
Rating 500W to 2kW
Certification ATEX certified) II 2 G/D
IECEx &ATEX certified Ex'd' IIC T2 to T4 Ex tD A21 IP66 T300°C to T135°C
EN/IEC60079-0, EN/IEC60079-1, EN/IEC61241-0 & EN/IEC61241-1
Enclosure Mild steel powder coated orange/grey, stainless steel option available to special order
Controls If required the heaters can be controlled from the EXHEAT range of remote mounted thermostats available for
use in Hazardous Areas (see last page of brochure)
Mounting Pre-drilled support feet supplied as standard
Voltage 1 phase 230/254V or 110V
www.exheat.com
5. FWD-T Adjustable Air Warmers
The FWD-T range comes with an easy to adjust external thermostat which
is designed for heating small work or storage areas and similar applications, located in
Zone 1 and 2 or Zone 21 and 22 Hazardous Areas where the flammable atmosphere
is a IIA, IIB or IIC Gas Group.
FEATURES
Certified to meet the ATEX Directive 94/9/EC and
IECEx
Weatherproof to IP66/67
Temperature classes T2, T3 and T4 available
Corrosion resistant powder coated finish
Suitable for floor or wall mounting
2 x 25mm (plugged) cable entries provided as
standard
Rotatable terminal box
Externally adjustable 0-40°C room temperature
controlled thermostat
Suitable for ambient temperatures from -60°C to
+60°C (subject to conditions to be discussed
with sales engineer)
Individually replaceable heating elements
TYPICAL APPLICATIONS
Aircraft hanger service bays
Fuel servicing areas
Chemical plants
Offshore installations
Battery stores
Gas installations
Containers
Explosive Stores
Paint/solvent stores
Rating 500W to 2kW
Certification
Enclosure
Controls
Mounting
Voltage
ATEX certified '0 II 2 G/D
IECEx & ATEX certified Ex'd' IIC T2 to T4 Ex tD A21 IP66 T300°C to T135°C
EN/IEC60079-0, EN/IEC60079-1, EN/IEC61241-0 & EN/IEC61241-1
Aluminium powder coated orange/grey
Externally adjustable 0-40°C room temperature controlled thermostat
Pre-drilled support feet supplied as standard
1 phase 230/254V or 110V
aHazardous Area Process Heat & Control Solutions
6. FAW Hazardous Area Air Warmers
The FAW range offers a versatile lightweight air warming solution for small work
and storage areas located in Zone 1 and Zone 2 Hazardous Areas. The range is
suitable for use with 1 phase or 3 phase power supplies up to 440 volts.
The range can also be configured for use with DC power supplies.
FEATURES
Certified to meet the requirements of the ATEX
Directive 94/9/EC, IECEx and GOST
Lightweight enclosure certified weatherproof to
IP66
Suitable for 1 phase or 3 phase (3 or 4 wire) or
DC power supplies
Temperature classes T2, T3, and T4 available
Suitable for floor or wall mounting
A 20mm cable entry is provided as standard,
additional entries can be provided as required
Powder coated finish
Optional range of Flameproof room thermostats
can also be provided
Suitable for ambient temperatures from -60°C to
+60°C (subject to conditions to be discussed
with sales engineer)
Individually replaceable heating elements
TYPICAL APPLICATIONS
Aircraft hangers
Fuel servicing areas
Chemical plants
Offshore installations
Battery stores
Gas installations
Paint/solvent stores
Safety showers
Rating 250W to 3kW
Certification ATEX certified ® II 2 G
IECEx &ATEX certified Ex'e' II T2 to T4
IEC/EN60079-0 & IEC/EN60079-7
GOST
Enclosure
Controls
Mounting
Voltage
Lightweight stainless steel or coated mild steel
If required the heaters can be controlled from the EXHEAT range of remote mounted thermostats available for
use in Hazardous Areas (see last page of brochure)
Support feet are pre-drilled and suitable for floor mounting supplied as standard (wall mounting brackets
available on request)
1 phase: 230 to 254V or 110V
3 phase: 400 to 440V
www.exheat.com
7. The heavy duty natural convector type STW air warmer range is most suitable for
medium sized spaces. The units can be supplied with an optional integral
externally adjustable limit thermostat, a remote thermostat or frost
protection as required.
41,
TYPICAL APPLICATIONS
STW Industrial Convector Heaters
Workshops
FEATURES Crane cabs
Heavy duty robust construction Dairies
Suitable for floor or wall mounting Ships
Powder coated sheet steel construction Storage units
Supplied with plugged cable entries Greenhouses
Weatherproof protected to IP66 against water Pump stations
and dust
Equipment rooms
Optional adjustable 0-40°C room temperature
controlled thermostat Frost protection
Rating 1kW, 2kW and 3kW ratings available
Construction Powder coated sheet metal construction
Terminal Box Powder coated die cast aluminium, weatherproof to IP66
Element Finned plated mild steel
Supply Standard heaters are to suit 110V or 230V
Mounting Support feet are pre-drilled and suitable for floor mounting or wall mounting
Heaters should not be covered and always mounted horizontally
Hazardous Area Process Heat & Control Solutions
8. irr iIII
TYPICAL APPLICATIONS
Ammunition depots
Explosive stores
Chemical plant warehouses
Firework factories
Sugar refineries
Laboratories
FLR Flameproof Liquid Filled Radiator
The FLR range of liquid filled electrically heated radiators has been specifically designed to provide heating in
Zones 1 and 2 or Zone 21 and 22 Hazardous Areas where airborne dust particles are of particular concern.
Our FLR-A range comes complete with an externally adjustable control thermostat.
FEATURES
Certified to meet the ATEX Directive 94/9/EC
Surface temperature limited to meet EN 563
safety requirements
Integral preset surface temperature control
thermostat
Floor mounting
Long life Incoloy 825 sheathed rod-type element
Radiator filled with water/glycol mix
Suitable for ambient temperatures from
-20°C to +40°C
Robust construction
Certified weatherproof to IP66
Decorative, white powder coat finish
Manual reset over-temperature cut-out fitted to
ensure radiator surface temperature never
exceeds 80°C
Optional externally adjustable control thermostat
Certification ATEX certified ® II 2 G/D
Ex'd' IIC T6 Ex tD A21 IP6X T85°C
EN60079-0, EN60079-1, EN61241-0 & EN61241-1
Enclosure
Radiator
Element
Controls
Mounting
Rating
Voltage
Cast aluminium finished in orange/grey
Pressed steel with white powder coated finish
Rod-type, comprising high quality 80/20 nickel chrome resistance wire, compacted in magnesium
oxide insulating powder and encased in corrosion resistant Incoloy 825 metal sheath
Preset radiator surface temperature control thermostat and manual reset safety temperature limiter (optional
externally adjustable control thermostat)
Floor standing with welded-on feet and wall retention brackets
Standard heater ratings 1 kW, 2kW and 3kW
230V single phase
www.exheat.com
9. FCR Hazardous Area Convector Heaters
The heavy duty folded steel construction and the
finned stainless steel elements give the FCR range
an exceptional long life. The FCR range is certified
for use in Hazardous Areas where the flammable
atmosphere is a IIA, IIB or IIC Gas Group.
FEATURES
Certified to meet the ATEX Directive 94/9/EC and
IECEx
Small footprint, occupying less floor space
Sloped top, preventing objects being placed on
the grill
Floor or wall mounting
Integral terminal enclosure
Suitable for ambient temperatures from -60°C
to +60°C
Stainless steel finned elements for long life
Grey gloss, powder coated, sheet steel
construction
Optional built on room temperature control
thermostat
TYPICAL APPLICATIONS
Aircraft hangers
Fuel servicing areas
Chemical plants
Offshore installations
Battery stores
Gas installations
Certification ATEX certified ® II 2 G
IECEx & ATEX certified Ex'e' IIC T2 to T4
IEC/EN60079-0 & IEC/EN60079-7
Enclosure
Elements
Controls
Mounting
Voltage
Heavy duty folded steel
Individually replaceable, finned heating elements, comprising high quality 80/20 nickel chrome resistance
wire, compacted in magnesium oxide insulating powder and encased in an Incoloy sheath
If required the heaters can be controlled from the EXHEAT range of remote mounted thermostats available for
use in Hazardous Areas (see last page of brochure)
Wall or floor mounting via brackets/feet supplied
1 phase: 110V or 230V
3 phase: 415V
Rating Up to 3kW
Hazardous Area Process Heat & Control Solutions
10. FUH Flameproof Fan Heaters
The FUH range offers a compact high capacity air heating solution that is suitable for large premises.
The flexible design allows for the FUH to be supplied according to the capacity requirements and power
supply of the client.
FEATURES
Certified to meet the ATEX Directive 94/9/EC
• Efficient liquid to air heat exchanger
Over-temperature protection
Adjustable angle outlet louvres
Optional, integral room temperature control
thermostat (to be used in conjunction with a
suitable rated contactor)
Suitable for ambient temperatures -40°C to +40°C
TYPICAL APPLICATIONS
Oil refineries
Petrochemical plant
Offshore platforms
Ammunition stores
Sewage plants
Paint stores
Certification ATEX certified C) II 2 G
Ex'd' IIC T3
EN60079-0 & EN60079-1
Casing
Element
Controls
Rating
Voltage
Grey powder coated steel
Rod-type heating elements comprising 80/20 nickel chrome resistance wire, compacted high purity
magnesium oxide insulating powder and encased in Incoloy 825 metal sheath
If required the heaters can be controlled from the EXHEAT range of remote mounted thermostats available
for use in Hazardous Areas (see last page of brochure)
9kW to 30kW
Heater and motor: 3 phase (4 wire STAR), 20kW model 3 phase (3 wire DELTA)
Controls: up to 230V 1 phase.
10 www.exheat.com
11. FUH-C Flameproof Fan Heaters
The FUH-C Flameproof electric fan heater is an ideal solution for large spaces that have a temporary
heating requirement. Like the FUH range, the FUH-C range is designed for use in Zone 1 and Zone 2
areas where the flammable atmosphere is a IIA, IIB or IIC Gas Group.
FEATURES
Designed to meet the requirements of the ATEX
Directive 94/9/EC and IECEx
Wall or floor mounting
Over-temperature protection
Adjustable mounting for vertical flow direction
Optional wall bracket which allows lateral flow
direction
TYPICAL APPLICATIONS
Oil refineries
Petrochemical plant
Offshore platforms
Ammunition stores
Sewage plants
Paint stores
Certification ATEX certified ® II 2 G
IECEx & ATEX certified Ex'de' IIC T3
Casing
Element
Controls
Rating
IP rating
Immersion heater - powder coated mild steel
Finned type heating elements comprising 80/20 nickel chrome resistance wire, compacted high purity
magnesium oxide insulating powder and encased in Incoloy 800 metal sheath
3 phase controller providing isolation, safety contactor, control contactor & integral room thermostat can be
supplied by EXHEAT
3kW 1 phase unit connects directly to suitable power supply
6kW 3 phase units require separate controls
EXHEAT can supply optional control with an integral room thermostat
Heater: IP65
Controller: IP65/66/67
alHazardous Area Process Heat & Control Solutions
12. el'
IP ......„
• ..,- • , • idr , , r . • r
• ...
:r d. *dr . • ..dr , , ...
a ,
r
d..• .
... • dr
•
alr
O
dr ,
4. ,
O a
P e a re
a
0 dr
iff
P et 0 r
P , 0
5 0
9 4. dr 0
# d
0 al drd.
9 r # , _
• • * of dr dr
. ff dr
e P iff
, • , ff * ,
a , dr
.111,
Pdr e r dr
dr
HEF Hazardous Area Enclosure Heaters
The self-regulating properties of the HEF enclosure
heaters eliminate the requirement for a thermostat.
Coupled with the compact design, this makes the HEF
ideal for anti condensation, frost protection and
temperature control where the enclosure is located
within Zone 1 and Zone 2 or Class I, Div 2
Hazardous Areas.
FEATURES
Certified to meet the requirements of the ATEX
Directive 94/9/EC and IECEx
Compact, low profile, stainless steel case,
requires minimal space
Self-regulating - can be used without a
thermostat
Suitable for ambient temperatures from -60°C to
+80°C
Mounting of the heater can be in any orientation
Design allows installation close to internal
components and cables without fear of damage
by overheating
TYPICAL APPLICATIONS
Control / monitoring panels
Instrumentation cabinets
Condensation prevention
Temperature fluctuations
Frost protection
Certification
Casing
Element
Controls
ATEX certified ® II 2 G
IECEx &ATEX certified Ex'e' T4
EN/IEC60079-0 & EN/IEC60079-7
Perforated stainless steel
Self-regulating
The HEF is self-regulating, automatically reducing its output as the ambient temperature rises
If overall enclosure temperature control is required it is recommended that the HEF heater is
used in conjunction with one of the EXHEAT range of Ex'd' thermostats (see last page of brochure)
Mounting The heater may be mounted in any orientation, using appropriate securing bolts through the mounting feet
Rating The HEF range is available in a nominal 30, 50, 100, 200 & 500W outputs, models available for
110V or 230V 1 phase supplies
12
13. FP-MLH Flameproof Mini Line Heaters
The range of Flameproof mini line heaters consist of a screw plug or flanged type immersion
heater mounted in a thermally insulated heating vessel. They are designed to efficiently
transfer heat to a flowing medium (liquid, air or gas). All EXHEAT
Flameproof heaters are fully ATEX certified and designed for use in
Zone 1 and 2 Hazardous Areas, Gas Group IIA, IIB and IIC.
FEATURES
Certified to meet the ATEX Directive 94/9/EC
Weatherproof lightweight cast aluminium terminal
enclosure - IP67
Choice of built in process temperature sensors
and externally adjustable option
Mild steel or stainless steel vessel
Suitable for ambient temperatures -40°C to +40°C
Standard range of high quality Incoloy rod-type
elements, designed for water or withdrawable
ceramic core elements, designed for oil
Maximum allowable working pressure 5bar.g
(73psi.g)
Designed for horizontal installation (vertical
mounting version available on request)
TYPICAL APPLICATIONS
Water heating - wash rooms, industrial
washing equipment, hot water storage
tanks
Frost protection - pre-start systems for
water cooled engines, fire extinguishing
equipment, oil sump heating
Heat transfer oils - moulds, dies & platens,
closed loop systems for bitumen
Fuel oil heating - pre-heating to pumping
viscosity
Certification ATEX certified ® II 2 G
Ex'd' IIC T4-T6
EN60079-0 & EN60079-1
Enclosure Cast aluminium alloy with a maximum of two cable entries, external and internal earths and screwed
terminal cover
Element High quality nickel chrome resistance wire compacted in magnesium oxide insulating powder and sheathed in
corrosion resistant Incoloy, withdrawable ceramic core elements in mild steel or 316L stainless steel
Pressure Maximum allowable working pressure 5bar.g (73psi.g)
Design Code Sound Engineering Practice (SEP)
Insulation Mineral wool
Cladding Coated mild steel or stainless steel
Rating Up to 12kW
Hazardous Area Process Heat & Control Solutions
14. *sr
4
www.exheat.com14
HEWL/HEOL Line Heaters
The HEWL and HEOL range of line heaters is suitable for heating all process fluids which are non-
corrosive to the materials of construction. They provide a clean and efficient heating method for bulk
liquid flow applications.
FEATURES TYPICAL APPLICATIONS
Thermal insulation and cladding
Weatherproof terminal enclosure with protection
to IP55
Internal control thermostats and over-temperature
thermostat
Also available in Flameproof construction for
Hazardous Areas
Alternative materials of construction available
Designed for horizontal installation (vertical
mounting version available on request)
Industrial washing and rinsing processes
Indirect heating of liquids
Engine jacket pre-heating
Temperature maintenance of storage tanks
Under floor heating schemes
Lube oil pre-heating
Fuel oil
Heat transfer oils
Tempering of low grade residual oils for
burners and engines
Construction Weatherproof protection to IP55 Vessel Mild steel or stainless steel sheath
Flamepoof protection to IP65
Insulation Mineral wool
Element Incoloy 825 sheathed rod-type or
removable ceramic core type housed
in mild steel or stainless steel
Cladding Stucco aluminium
Voltage Standard supplies up to 690V
Working Pressure Up to 5bar.g (73psi.g)
Rating Up to 120kW (subject to application)
Design Code Sound Engineering Practice (SEP)
15. FP Cast Line Heaters
The range of cast aluminium line heaters provide an effective heating solution for constant flow liquids or
gases, eliminating the requirement for a costly pressure vessel. Particularly in high pressure
applications or when exotic process materials are required the FP Cast range can provide significant
commercial advantage. The design incorporates electric heating elements and an indirect process heating
coil imbedded within marine grade cast aluminium. This provides excellent heat transfer properties combined
with low surface temperatures. It should be noted that this design is not suitable for constantly varying flow
applications where precise outlet temperature control is required.
FEATURES
Certified to meet the requirements of the ATEX Directive 94/9/EC
and IECEx
Thermally insulated aluminium or stainless steel cladding
Flameproof IP65 rated terminal enclosure
Maximum working pressure and temperature rating of 300bar.g
at 100°C
Internal control thermostats and over-temperature thermostats
(PT 100 or thermocouple type K available)
Wall or floor, vertical or horizontal mounting
Multiple heating elements allow for step control or alternatively
thyristor control can be employed
Standard stainless steel process coil (other materials upon request)
Various process connections including industry standard flange or
compression joints
Certification ATEX certified ® II 2 G/D
IECEx & ATEX certified Ex'd' IIC T3 to T6 Ex tD A21 IP66 T200°C to T85°C
IEC/EN60079-0, IEC/EN60079-1, IEC/EN61241-0 & IEC/EN61241-1
Enclosure Painted mild steel or natural finished stainless steel
Element Stainless steel sheathed with 80/20 nickel chrome resistance
wire imbedded in high purity magnesium oxide
Casting Marine grade aluminium, insulated and aluminium clad
(stainless steel cladding available on request)
Process Coil Supplied as standard with stainless steel 321 (other materials
available on request)
Design Code ASME VIII or PD5500 with PED certification for installation within
the European Union
CE Marked In accordance with relevant EC Directives
Voltage Up to 690 VAC
Hazardous Area Process Heat & Control Solutions
16. FP Rod-Type Immersion Heaters
The FP range of Flameproof rod-type immersion heaters is
a highly adaptable solution that can be customised to suit
the process requirements of our clients. They are suitable
for heating all types of process liquids and gases which are
non-corrosive to the materials of construction.
FEATURES
Certified to meet the requirements of the ATEX
Directive 94/9/EC, IECEx, CSA and CCOE
Mild steel or 316 stainless steel terminal
enclosure with weatherproof protection to IP66
Choice of built in process temperature sensors
Suitable for ambient temperatures to -50°C to
+60°C
Mounting of the heater can be by a threaded boss
or an industry standard flange
Designed for horizontal installation (vertical
mounting version available on request)
Can be supplied with the terminal box mounted
away from the fixing boss/flange for high process
temperatures
TYPICAL APPLICATIONS
Pre-heating oil/water
Processing equipment
Cleaning and rinsing tanks
Heating medium
Boiler equipment
Frost protection
Heat transfer systems
Tank heating
Safety showers
Certification ATEX certified ® II 2 G/D
IECEx & ATEX certified Ex'd' IIC T1 to T6 Ex tD A21 IP66 T450 to 85°C
CSA certified Class I, Div 1, Gas Groups A, B, C & D
EN/IEC 60079-0, EN/IEC 60079-1, EN/IEC 61241-0 & EN/IEC 61241-1
CCOE
Enclosure
Elements
Controls
Mounting
Rating
Voltage
Mild steel or 316 stainless steel, external and internal earths, screwed terminal cover, finished in
epoxy paint (if required)
A choice of rod-type elements comprising of 80/20 nickel chrome resistance wire, compacted in high
purity magnesium oxide insulating powder and encased in either Incoloy, stainless steel and titanium sheath,
secured by either brazing or welding depending upon the process application
Heater over-temperature protection is fitted as standard (optional process temperature sensing devices can be
incorporated in the form of thermostats, RTD's or thermocouples)
Any threaded boss or flange in any material can be specified within the limits of the design parameters
Heater terminal box can be either 'direct-on' or 'stand-off', depending on process temperature
To suit process requirements
Any electrical supply up to 690V
16 www.exheat.com
17. FP-C Removable Core Immersion Heaters
The FP-C range of Flameproof removable single and multi
core heaters offers a Hazardous Area heating solution for oil
and similar applications where low heat density is required.
The element can be withdrawn for inspection without system
drain down. The standard heater consists of a single element
or multi core fitted into a mounting flange. A robust Ex'd'
terminal enclosure protects the electrical connections.
The watts density of the element core fitted depends upon the
media to be heated and the kilowatt rating required.
FEATURE'
Certified to meet the requirements of the ATEX
Directive 94/9/EC, IECEx and CCOE
Mild steel or 316 stainless steel terminal
enclosure with weatherproof protection to IP66
Choice of built in process temperature sensors
Suitable for ambient temperatures to -50°C to
+60°C
Mounting of the heater can be by a threaded boss
or an industry standard flange
Designed for horizontal installation (vertical
mounting version available on request)
Can be supplied with the terminal box mounted
away from the fixing boss/flange for high process
temperatures
TYPICAL APPLICATIONS
Pre-heating oil/water
Processing equipment
Cleaning and rinsing tanks
Heat transfer systems
Boiler equipment
Frost protection
Certification ATEX certified ® II 2 G/D
IECEx & ATEX certified Ex'd' IIC T1 to T6 Ex tD A21 IP66 T450 to 85°C
EN/IEC60079-0, EN/IEC60079-1, EN/IEC61241-0 & EN/IEC61241-1
CCOE
Enclosure
Elements
Controls
Mounting
Rating
Voltage
Mild steel or 316 stainless steel, external and internal earths, screwed terminal cover, finished in
epoxy paint (if required)
Removable core, comprising high quality 80/20 nickel chrome resistance wire, contained within
ceramic formers housed in plain or extended surface tubes
Heater over-temperature protection is fitted as standard (optional process temperature sensing devices
can be incorporated in the form of thermostats, RTD's or thermocouples)
Any threaded boss or flange in any material can be specified within the limits of the design parameters
Heater terminal box can be either 'direct-on' or 'stand-off', depending on process temperature
To suit process requirement within the design parameters and ATEX approval
Any electrical supply up to 690V
coHazardous Area Process Heat & Control Solutions
18. TYPICAL APPLICATIONS
Pre-heating oil/water
Processing equipment
Cleaning and rinsing ranks
Heat transfer systems
Boiler equipment
Frost protection
Safety showers
RFA Rod-Type Immersion Heaters
The RFA range of Flameproof rod-type immersion
heaters is suitable for installation in process tanks,
safety showers, engine sumps, pressure vessels
and similar plants located in Zone 1 and Zone 2
Hazardous Areas, where the flammable atmosphere
is a IIA, IIB or IIC Gas Group. They are suitable for
heating all process liquids or gases which are
non-corrosive to the materials of construction.
FEATUREF
Certified to meet the ATEX Directive 94/9/EC
Lightweight cast aluminium alloy terminal
enclosure with weatherproof protection to IP67
Choice of built in process temperature sensors
Suitable for ambient temperatures -40°C to
+40°C
Mounting of the heater can be by a threaded
boss or an industry standard flange
Designed for horizontal installation, vertical
mounting available on request
Certification ATEX certified ® II 2 G
Ex'd' IIC T3 to T6
EN60079-0 & EN60079-1
Enclosure
Elements
Mounting
Controls
Rating
Voltage
Cast aluminium alloy with a maximum of two cable entries, external and internal earths and screwed
terminal cover
Certified Ex'd' IIC T4-T6 with the option of T3-T6 where the terminal enclosure is stood away from the
processing equipment
A maximum of three rod-type elements comprising 80/20 nickel chrome resistance wire, compacted in
high purity magnesium oxide insulating powder and encased in either Incoloy, stainless steel or titanium
sheath, secured by either brazing or welding depending upon the process application
Any threaded boss or flange in any material can be specified within the limits of the design parameters
Heaters can be either 'direct-on' or 'standoff' as required by the 'T' classification
Heater over-temperature protection is fitted as standard
Up to 18kW
Any electrical supply up to 690V
18 www.exheat.com
19. PIH Portable Immersion Heaters
Eit
The PIH range of portable immersion heaters are
primarily designed for baptismal pools and are also
suitable for heating large or small quantities of
liquid, stored in open topped vessels and baths,
where permanently installed immersion heaters are
not practical or desirable.
FEATURES
Robust stainless steel construction
IP66 terminal enclosure
Long life Incoloy 825 sheathed rod-type elements
Wide, stable, self-supporting base
Optional control thermostat
Long unheated length for use with low liquid
levels
TYPICAL APPLICATIONS
Baptismal pools
Sterilizing
Drum heating
Vat heating
Self colour aluminium protected to IP66
Rod-type with Incoloy 825 sheaths
Stainless steel
Standard construction: none
Automatic construction: capillary type thermostat (optional)
Standard heater rating 3kW
230V 1 phase
This equipment must be protected by an RCD and be fully earthed
The element must be fully submerged before being energised
Enclosure
Element
Immersed parts
Controls
Rating
Voltage
Installation
Hazardous Area Process Heat & Control Solutions 19
20. TYPICAL APPLICATIONS
Calorifier packages
Hot water storage tanks
Cleaning and rinsing equipment
Heat transfer systems
Boiler equipment
www.exheat.com20
HFY Flanged Industrial Immersion Heaters
The HFY range of flanged immersion
heaters are suitable for all commercial
and industrial hot water cylinders and
process tank heating applications which
are non-corrosive to the materials of
construction. Each heater is supplied
with an adjustable control thermostat,
for automatic temperature control and
Run Dry, manual reset, over-temperature
protection thermostat.
FEATURES
Individually replaceable Incoloy 825 elements
Weatherproof terminal enclosure to IP54
'Run Dry' over-temperature protection
Brass or stainless steel mounting flange
Heavy duty stud terminals suitable for client
cables
Designed for horizontal installation only
Rating Rating up to 54kW
Enclosure Heavy gauge, corrosion protected, mild steel having a hinged access door and two undrilled removable gland
plates for cable entry (finished in grey stove enamel)
Flange Brass or stainless steel having 8 bolt holes, 10mm diameter on 146mm PCD
Elements Nickel chrome resistance wire compacted in high purity magnesium oxide insulating powder and sheathed in
corrosion resistant Incoloy. Each element is secured to the flange by screwed compression fixings, making
them individually replaceable
Controls A capillary type control thermostat and a manual reset thermostat are fitted as standard
Working Pressure The maximum allowable working pressure is 6bar.g (87psi.g)
Thermostat Two stainless steel pockets are secured into the flange by screwed compression fittings, one of which is
Pockets thermally linked to the uppermost element
Voltage Standard units are nominally designed for 415v, and are suitable for operation on 380v - 440v electrical supplies
Other voltages and alternative wiring configurations available on request.
21. HB Industrial Immersion Heaters
The HB range of screwed or flanged immersion heaters is an inexpensive solution for all commercial and
industrial hot water cylinders, process tank heating, cooling tower frost protection and other applications
which are non-corrosive to the materials of construction. The HB range of heaters can be supplied with an
adjustable control thermostat scaled to suit the specific application.
ROD-TYPE
Heat is transferred to the liquid by means of
Incoloy 825 sheathed heating elements with
automatic control being achieved using an integral
adjustable thermostat.
Rating up to 18kW.
FEATURES
Robust lightweight aluminium enclosure
Fitted with control and limit thermostats
Certified weatherproof to IP66
Suitable for working pressures of up to 8bar.g
(higher working pressures are available on request)
All models fitted with Incoloy 825 elements and
2-off stainless steel thermostat pockets
Terminal box can be rotated through 360 degrees
to allow final cable entry position to be chosen
Heavy duty brass fixing boss screwed 2", 21/4" or
21/2" BSPP, alternatively supplied with square
mounting flange
Up to two cable entries (standard 1 off)
Standard immersion heaters are designed for
horizontal installation (heaters for vertical
installation are available to order)
REMOVABLE CORF TYPE
This range is recommended for applications
where the equipment cannot be easily drained.
Heat is transferred to the liquid by means of
removable ceramic heating elements within a
carrier tube to allow replacement without
draining.
Automatic control can be achieved by fitting a
thermostat into the integral pocket.
Sheath material available in stainless steel or
mild steel.
Rating up to 6kW.
TYPICAL APPLICATIONS
Hot water storage tanks
Pre-heating oil and water
Food processing equipment
Cleaning and rinsing equipment
Heat transfer, process and boiler equipment
Frost protection
ardous Area Process Heat & Control Solutions
22. ATEX Certified Flameproof Thermostats
All Flameproof thermostats are ATEX certified Ex`d' IIC T6, suitable for installation in Zone 1 or 2 Hazardous
Areas. The AFT has external adjustment enabling quick and accurate variable control for liquid, gas and air
applications. The RFT is suitable for use in process tanks and vessels containing liquids or gases. The HFT is
designed for the temperature control of work or storage areas, in conjunction with a Hazardous Area air heater.
TT Air/Process Sensing Thermostat
ATEX certified ® II 2 G/D
IECEx & ATEX certified Ex'd' IIC T6
Ex tD A21 IP6X T85°C
for Zone 1 or 2 (Gas) and Zone 21 or 22 (Dust)
Externally adjustable option
Wall mounted/threaded boss or industry
standard flange
Suitable for ambient temperatures from -60°C to
+60°C
iFT Air Sensing Thermostat
ATEX certified ® II 2 G
IECEx & ATEX certified Ex'd' IIC T6
for Zone 1 or 2 (Gas)
Wall mounted
Stainless steel enclosure
Suitable for ambient temperatures from -60°C to
+60°C
WT Process Sensing Thermostat
ATEX certified g II 2 G/D
Ex'd' IIC T1-T6 Ex tD A21 IP6X T450°C - T85°C
for Zone 1 or 2 (Gas) and Zone 21 or 22 (Dust)
Mounting can be by a threaded boss or an
industry standard flange
Lightweight cast aluminium enclosure certified
weatherproof to IP67
Suitable for ambient temperatures from -40°C to
+40°C
www.exheat.com
23. her
HIH Flameproof Transmitter Enclosures
The HIH range of instrument enclosures are designed to accommodate most makes of head mounted process
transmitter or termination block. EXHEAT promotes the use of its preferred range of WIKA® temperature
transmitters, however empty enclosures can be supplied or, on special request, other makes of transmitter
such as Siemens®, Rosemount® or Yokogawa® can be installed.
FEATURES
Stainless steel enclosure
Optional viewing window for transmitter
LCD displays
Ingress protection IP66
ATEX certified ® II 2 G/D
ATEX & IECEx certified Ex'd' IIC T6 / Ex tD A21
IP66 T85°C
Compliant with EN/IEC60079-0, EN/IEC60079-1,
EN/IEC61241-0 & EN/IEC61241-1
M20 cable entries (2 standard, 4 maximum)
TYPICAL APPLICATIONS
Temperature measurement and display for all
applications
Accommodates all major brands of head
mounted process transmitter
Hazardous Area process temperature
measurement
Thermowell assemblies available
Machinery and plant construction, power
engineering, heating, ventilation, and refrigeration
WIKA is a registered trademark of WIKA Alexander Wiegand GmbH
Siemens is a registered trademark of Siemens AG
Rosemount is a registered trademark of Rosemount Inc
Yokogawa is a registered trademark of Yokogawa Electric Corp
Hazardous Area Process Heat & Control Solutions