This safety data sheet provides information on the proper use and handling of a 70% ethanol solution. It lists ethanol as the main hazardous ingredient and identifies the product as highly flammable and capable of causing serious eye irritation. Precautions are outlined to prevent exposure through inhalation, skin contact and eye contact of the vapors and instructions are provided for safe storage, personal protective equipment usage, spill response and transport.
This document provides information on the chemical 4-Fluorobenzoyl chloride (CAS 403-43-0) including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, toxicity, ecological information, disposal considerations, and transportation. It identifies 4-Fluorobenzoyl chloride as a skin and eye irritant that can cause severe burns, and lists requirements for proper personal protective equipment when handling.
Pigment yellow 138 cas 30125 47-4 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Hals 292 tinuvin 292 cas 41556 26-7 cas 82919-37-7 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Product Identifier: Poly 1511 Liquid Plastic Part B
Poly 1512 Liquid Plastic Part B
Poly 1512X Liquid Plastic Part B
Product Code(s): 1511B, 1512B, 1512XB
Use: Component for Liquid Polyurethane Casting
Plastic. For Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
This document provides safety information about Isobutane. Key points:
- Isobutane is an extremely flammable gas that is colorless and odorless.
- Protective equipment should be worn when handling Isobutane to prevent injury from fire or explosion hazards.
- Isobutane containers should be kept tightly closed and stored in a well-ventilated, cool area away from heat and ignition sources.
Material Safety Data Sheet (MSDS) for Cosmesome-Chol (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Chol. The Cosmesome-Chol formulation is composed of saturated phospholipids that form interdigitated lipids containing cholesterol in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
This document provides information on the chemical 4-Fluorobenzoyl chloride (CAS 403-43-0) including its identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, toxicity, ecological information, disposal considerations, and transportation. It identifies 4-Fluorobenzoyl chloride as a skin and eye irritant that can cause severe burns, and lists requirements for proper personal protective equipment when handling.
Pigment yellow 138 cas 30125 47-4 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Hals 292 tinuvin 292 cas 41556 26-7 cas 82919-37-7 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Product Identifier: Poly 1511 Liquid Plastic Part B
Poly 1512 Liquid Plastic Part B
Poly 1512X Liquid Plastic Part B
Product Code(s): 1511B, 1512B, 1512XB
Use: Component for Liquid Polyurethane Casting
Plastic. For Industrial/Professional use only.
Manufacturer: Polytek Development Corp.
55 Hilton St., Easton, PA 18042
Phone Number: 610-559-8620 (8 a.m. to 6:30 p.m. EST)
Emergency Phone: CHEMTREC 800-424-9300 or
+1 (703) 527-3887
E-mail: sds@polytek.com
This document provides safety information about Isobutane. Key points:
- Isobutane is an extremely flammable gas that is colorless and odorless.
- Protective equipment should be worn when handling Isobutane to prevent injury from fire or explosion hazards.
- Isobutane containers should be kept tightly closed and stored in a well-ventilated, cool area away from heat and ignition sources.
Material Safety Data Sheet (MSDS) for Cosmesome-Chol (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Chol. The Cosmesome-Chol formulation is composed of saturated phospholipids that form interdigitated lipids containing cholesterol in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Solo Smoke Detector Tester Manufacturer and Supplier – Novus Fire.pdfNovusFireandSecurity
Functional testing for smoke detector is a very important process to ensure the fire alarm system are working at optimal at any given time. As per NFPA 72(10), Sec. 14.4.1.2 regular functional testing is required on a regular basis.
https://www.novus.ae/smoke-detector-testers/
Solo A5 Aerosol Spray - Novus fire and securityNovus
Novus have several options for testing of smoke via Smoke Detector Testers in UAE and KSA. We offer solo A5 aerosol spray and heat detector testing equipment.
Material Safety Data Sheet (MSDS) for Cosmesome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Res. The Cosmesome-Res formulation is composed of saturated phospholipids that form interdigitated lipids containing resveratrol in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Dermasome-Chol (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Chol. The Dermasome-Chol formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing cholesterol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Cosmesome (containing alcohol). Product Spec Sheet for Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome. The Cosmesome formulation is composed of saturate phospholipids that form interdigitated lipids in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Cosmesome-Ubq (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Ubq. The Cosmesome-Ubq formulation is composed of saturated phospholipids that form interdigitated lipids containing CoQ10 in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers
Material Safety Data Sheet (MSDS) for Dermasome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Res. The Dermasome-Res formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing resveratrol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
This document provides suppliers and safety information for diethylamine (cas 109-89-7), including its identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, and toxicological information. It identifies diethylamine as a flammable liquid and vapor that is harmful if inhaled, swallowed, or absorbed through the skin, and causes severe skin burns and eye damage.
Pigment yellow 139 cas 36888 99-0 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Energol rc-4997 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
1. Energol RC 100 is a compressor lubricant produced by Castrol BP Petco Ltd. for specific industrial applications.
2. The product contains highly refined base oils and proprietary additives. It is not classified as hazardous and does not contain any ingredients above regulated thresholds.
3. Prolonged or repeated skin contact can cause defatting of the skin and irritation. The product should not be used in compressors producing breathable air.
Material Safety Data Sheet (MSDS) for Dermasome-Ubq (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Ubq. The Dermasome-Ubq formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing CoQ10 upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Dermasome (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome. The Dermasome formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Uv 531 chimassorb 81 cas 1843 05-6 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
This document provides a safety data sheet for Trinexis, which is a mixture used as a plant growth regulator in agriculture. It contains Trinexapac-ethyl (25%) and other ingredients. Section 1 identifies the product and supplier. Section 2 outlines the hazards, including that it may cause an allergic skin reaction and is toxic to aquatic life with long lasting effects. Section 3 lists the ingredients. Sections 4-7 provide first aid measures, firefighting guidance, accidental release measures, and advice for safe handling and storage. Section 8 covers exposure controls and personal protective equipment needed such as gloves and eye protection.
Energol ic-hfx-404-9389 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
This safety data sheet provides information on Energol IC-HF X 404 engine oil. It contains no hazardous ingredients above regulated thresholds. Prolonged skin contact may cause irritation. Used engine oil may contain carcinogens. If contact occurs, wash skin and eyes thoroughly. Store in a dry, well-ventilated area away from heat and sunlight. In a fire, this product may decompose and produce carbon oxides, sulfur oxides and metal oxides. Dispose of waste via licensed contractor and in accordance with local regulations to prevent environmental contamination.
This material safety data sheet provides information on the chemical 2,4-Toluene diisocyanate and 2,6-Toluene diisocyanate. It is a clear, colorless to slightly yellow liquid with a pungent odor. It is extremely hazardous if ingested or inhaled and can cause damage to lungs, nerves, liver and other organs upon exposure. Personal protective equipment including gloves, eye protection and respirators are required when handling.
This document provides safety information for a 70% isopropyl alcohol solution. It lists the product's hazards including being highly flammable and causing serious eye irritation. It can cause drowsiness or dizziness if inhaled. The document provides first aid measures, firefighting instructions, handling and storage recommendations, and toxicity information. It identifies the product as a ground water pollutant that can cause dry skin upon prolonged exposure.
1. The document provides the material safety data sheet (MSDS) for the product W-COAT FEM RD ADAMANTIUM DARK 10282 MONOCOMPONENT. It lists the product identification, hazards, composition, first aid measures, and fire-fighting measures.
2. The product contains hazardous substances like butyl acetate, butanol, and epoxy resin. It is classified as flammable and can cause skin, eye and respiratory irritation as well as cancer and reproductive toxicity.
3. In case of inhalation, remove the victim to fresh air. In case of skin contact, remove contaminated clothing and wash skin with plenty of water. In case of eye contact, flush with
Solo Smoke Detector Tester Manufacturer and Supplier – Novus Fire.pdfNovusFireandSecurity
Functional testing for smoke detector is a very important process to ensure the fire alarm system are working at optimal at any given time. As per NFPA 72(10), Sec. 14.4.1.2 regular functional testing is required on a regular basis.
https://www.novus.ae/smoke-detector-testers/
Solo A5 Aerosol Spray - Novus fire and securityNovus
Novus have several options for testing of smoke via Smoke Detector Testers in UAE and KSA. We offer solo A5 aerosol spray and heat detector testing equipment.
Material Safety Data Sheet (MSDS) for Cosmesome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Res. The Cosmesome-Res formulation is composed of saturated phospholipids that form interdigitated lipids containing resveratrol in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Dermasome-Chol (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Chol. The Dermasome-Chol formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing cholesterol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Cosmesome (containing alcohol). Product Spec Sheet for Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome. The Cosmesome formulation is composed of saturate phospholipids that form interdigitated lipids in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Cosmesome-Ubq (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Ubq. The Cosmesome-Ubq formulation is composed of saturated phospholipids that form interdigitated lipids containing CoQ10 in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers
Material Safety Data Sheet (MSDS) for Dermasome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Res. The Dermasome-Res formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing resveratrol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
This document provides suppliers and safety information for diethylamine (cas 109-89-7), including its identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, and toxicological information. It identifies diethylamine as a flammable liquid and vapor that is harmful if inhaled, swallowed, or absorbed through the skin, and causes severe skin burns and eye damage.
Pigment yellow 139 cas 36888 99-0 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
Energol rc-4997 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
1. Energol RC 100 is a compressor lubricant produced by Castrol BP Petco Ltd. for specific industrial applications.
2. The product contains highly refined base oils and proprietary additives. It is not classified as hazardous and does not contain any ingredients above regulated thresholds.
3. Prolonged or repeated skin contact can cause defatting of the skin and irritation. The product should not be used in compressors producing breathable air.
Material Safety Data Sheet (MSDS) for Dermasome-Ubq (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Ubq. The Dermasome-Ubq formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing CoQ10 upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Dermasome (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome. The Dermasome formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Uv 531 chimassorb 81 cas 1843 05-6 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
This document provides a safety data sheet for Trinexis, which is a mixture used as a plant growth regulator in agriculture. It contains Trinexapac-ethyl (25%) and other ingredients. Section 1 identifies the product and supplier. Section 2 outlines the hazards, including that it may cause an allergic skin reaction and is toxic to aquatic life with long lasting effects. Section 3 lists the ingredients. Sections 4-7 provide first aid measures, firefighting guidance, accidental release measures, and advice for safe handling and storage. Section 8 covers exposure controls and personal protective equipment needed such as gloves and eye protection.
Energol ic-hfx-404-9389 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
This safety data sheet provides information on Energol IC-HF X 404 engine oil. It contains no hazardous ingredients above regulated thresholds. Prolonged skin contact may cause irritation. Used engine oil may contain carcinogens. If contact occurs, wash skin and eyes thoroughly. Store in a dry, well-ventilated area away from heat and sunlight. In a fire, this product may decompose and produce carbon oxides, sulfur oxides and metal oxides. Dispose of waste via licensed contractor and in accordance with local regulations to prevent environmental contamination.
This material safety data sheet provides information on the chemical 2,4-Toluene diisocyanate and 2,6-Toluene diisocyanate. It is a clear, colorless to slightly yellow liquid with a pungent odor. It is extremely hazardous if ingested or inhaled and can cause damage to lungs, nerves, liver and other organs upon exposure. Personal protective equipment including gloves, eye protection and respirators are required when handling.
This document provides safety information for a 70% isopropyl alcohol solution. It lists the product's hazards including being highly flammable and causing serious eye irritation. It can cause drowsiness or dizziness if inhaled. The document provides first aid measures, firefighting instructions, handling and storage recommendations, and toxicity information. It identifies the product as a ground water pollutant that can cause dry skin upon prolonged exposure.
1. The document provides the material safety data sheet (MSDS) for the product W-COAT FEM RD ADAMANTIUM DARK 10282 MONOCOMPONENT. It lists the product identification, hazards, composition, first aid measures, and fire-fighting measures.
2. The product contains hazardous substances like butyl acetate, butanol, and epoxy resin. It is classified as flammable and can cause skin, eye and respiratory irritation as well as cancer and reproductive toxicity.
3. In case of inhalation, remove the victim to fresh air. In case of skin contact, remove contaminated clothing and wash skin with plenty of water. In case of eye contact, flush with
This safety data sheet provides information on the hazards and safe handling of cellulose, laboratory grade. It identifies cellulose (CAS No. 9004-34-6) as the main substance, which is not classified as hazardous. The document lists synonyms for cellulose and recommends using it as a chemical raw material or food/cosmetic additive. It provides first aid measures for exposure and firefighting guidance, noting that cellulose itself is not flammable but may present an explosion hazard as a dust.
This document is a safety data sheet for a product called Ethanol 70%, which is a mixture of 70% ethanol and nonhazardous additives. It lists ethanol as a hazardous component. The document provides information on the product's identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information. It identifies the product as flammable and causing serious eye irritation. Personal protective equipment including gloves, protective clothing and safety glasses are recommended when handling the product.
This document provides a safety data sheet for a 20% hydrogen peroxide standard. It lists hydrogen peroxide and water as ingredients. Hazards include serious eye damage, acute oral toxicity, and strong oxidizing properties. Personal protective equipment like gloves, eye protection and respiratory protection are recommended when handling. The product is a clear, odorless liquid and strong oxidizer. It is stable but can decompose violently if contaminated or exposed to heat or combustible materials.
This document summarizes safety information for Cocamide DEA. It can cause skin and eye irritation and is suspected of causing cancer. Personal protective equipment like gloves and eye protection should be worn when handling. It has a flash point above 93°C and is not flammable but will burn. In case of accidental exposure, wash skin with soap and water and flush eyes with water for 15 minutes. Store in a cool, dry place and dispose of properly.
1. This document provides a material safety data sheet for a 1N solution of acetic acid. It is composed of 6% acetic acid and 94% water by weight.
2. Acetic acid is corrosive and hazardous if ingested, inhaled, or comes into contact with skin or eyes. It can cause burns and damage tissues. Repeated exposure may damage the blood, kidneys, lungs and other organs.
3. Personal protective equipment including gloves, safety goggles and protective clothing should be worn when handling this solution. Good ventilation is also necessary due to acetic acid's irritating vapors.
Local Advanced Lung Cancer: Artificial Intelligence, Synergetics, Complex Sys...Oleg Kshivets
Overall life span (LS) was 1671.7±1721.6 days and cumulative 5YS reached 62.4%, 10 years – 50.4%, 20 years – 44.6%. 94 LCP lived more than 5 years without cancer (LS=2958.6±1723.6 days), 22 – more than 10 years (LS=5571±1841.8 days). 67 LCP died because of LC (LS=471.9±344 days). AT significantly improved 5YS (68% vs. 53.7%) (P=0.028 by log-rank test). Cox modeling displayed that 5YS of LCP significantly depended on: N0-N12, T3-4, blood cell circuit, cell ratio factors (ratio between cancer cells-CC and blood cells subpopulations), LC cell dynamics, recalcification time, heparin tolerance, prothrombin index, protein, AT, procedure type (P=0.000-0.031). Neural networks, genetic algorithm selection and bootstrap simulation revealed relationships between 5YS and N0-12 (rank=1), thrombocytes/CC (rank=2), segmented neutrophils/CC (3), eosinophils/CC (4), erythrocytes/CC (5), healthy cells/CC (6), lymphocytes/CC (7), stick neutrophils/CC (8), leucocytes/CC (9), monocytes/CC (10). Correct prediction of 5YS was 100% by neural networks computing (error=0.000; area under ROC curve=1.0).
One health condition that is becoming more common day by day is diabetes.
According to research conducted by the National Family Health Survey of India, diabetic cases show a projection which might increase to 10.4% by 2030.
share - Lions, tigers, AI and health misinformation, oh my!.pptxTina Purnat
• Pitfalls and pivots needed to use AI effectively in public health
• Evidence-based strategies to address health misinformation effectively
• Building trust with communities online and offline
• Equipping health professionals to address questions, concerns and health misinformation
• Assessing risk and mitigating harm from adverse health narratives in communities, health workforce and health system
Rasamanikya is a excellent preparation in the field of Rasashastra, it is used in various Kushtha Roga, Shwasa, Vicharchika, Bhagandara, Vatarakta, and Phiranga Roga. In this article Preparation& Comparative analytical profile for both Formulationon i.e Rasamanikya prepared by Kushmanda swarasa & Churnodhaka Shodita Haratala. The study aims to provide insights into the comparative efficacy and analytical aspects of these formulations for enhanced therapeutic outcomes.
Muktapishti is a traditional Ayurvedic preparation made from Shoditha Mukta (Purified Pearl), is believed to help regulate thyroid function and reduce symptoms of hyperthyroidism due to its cooling and balancing properties. Clinical evidence on its efficacy remains limited, necessitating further research to validate its therapeutic benefits.
Cell Therapy Expansion and Challenges in Autoimmune DiseaseHealth Advances
There is increasing confidence that cell therapies will soon play a role in the treatment of autoimmune disorders, but the extent of this impact remains to be seen. Early readouts on autologous CAR-Ts in lupus are encouraging, but manufacturing and cost limitations are likely to restrict access to highly refractory patients. Allogeneic CAR-Ts have the potential to broaden access to earlier lines of treatment due to their inherent cost benefits, however they will need to demonstrate comparable or improved efficacy to established modalities.
In addition to infrastructure and capacity constraints, CAR-Ts face a very different risk-benefit dynamic in autoimmune compared to oncology, highlighting the need for tolerable therapies with low adverse event risk. CAR-NK and Treg-based therapies are also being developed in certain autoimmune disorders and may demonstrate favorable safety profiles. Several novel non-cell therapies such as bispecific antibodies, nanobodies, and RNAi drugs, may also offer future alternative competitive solutions with variable value propositions.
Widespread adoption of cell therapies will not only require strong efficacy and safety data, but also adapted pricing and access strategies. At oncology-based price points, CAR-Ts are unlikely to achieve broad market access in autoimmune disorders, with eligible patient populations that are potentially orders of magnitude greater than the number of currently addressable cancer patients. Developers have made strides towards reducing cell therapy COGS while improving manufacturing efficiency, but payors will inevitably restrict access until more sustainable pricing is achieved.
Despite these headwinds, industry leaders and investors remain confident that cell therapies are poised to address significant unmet need in patients suffering from autoimmune disorders. However, the extent of this impact on the treatment landscape remains to be seen, as the industry rapidly approaches an inflection point.
Osteoporosis - Definition , Evaluation and Management .pdfJim Jacob Roy
Osteoporosis is an increasing cause of morbidity among the elderly.
In this document , a brief outline of osteoporosis is given , including the risk factors of osteoporosis fractures , the indications for testing bone mineral density and the management of osteoporosis
These lecture slides, by Dr Sidra Arshad, offer a simplified look into the mechanisms involved in the regulation of respiration:
Learning objectives:
1. Describe the organisation of respiratory center
2. Describe the nervous control of inspiration and respiratory rhythm
3. Describe the functions of the dorsal and respiratory groups of neurons
4. Describe the influences of the Pneumotaxic and Apneustic centers
5. Explain the role of Hering-Breur inflation reflex in regulation of inspiration
6. Explain the role of central chemoreceptors in regulation of respiration
7. Explain the role of peripheral chemoreceptors in regulation of respiration
8. Explain the regulation of respiration during exercise
9. Integrate the respiratory regulatory mechanisms
10. Describe the Cheyne-Stokes breathing
Study Resources:
1. Chapter 42, Guyton and Hall Textbook of Medical Physiology, 14th edition
2. Chapter 36, Ganong’s Review of Medical Physiology, 26th edition
3. Chapter 13, Human Physiology by Lauralee Sherwood, 9th edition
TEST BANK For Community and Public Health Nursing: Evidence for Practice, 3rd...Donc Test
TEST BANK For Community and Public Health Nursing: Evidence for Practice, 3rd Edition by DeMarco, Walsh, Verified Chapters 1 - 25, Complete Newest Version TEST BANK For Community and Public Health Nursing: Evidence for Practice, 3rd Edition by DeMarco, Walsh, Verified Chapters 1 - 25, Complete Newest Version TEST BANK For Community and Public Health Nursing: Evidence for Practice, 3rd Edition by DeMarco, Walsh, Verified Chapters 1 - 25, Complete Newest Version Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Pdf Chapters Download Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Pdf Download Stuvia Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Study Guide Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Ebook Download Stuvia Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Questions and Answers Quizlet Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Studocu Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Quizlet Test Bank For Community and Public Health Nursing: Evidence for Practice 3rd Edition Stuvia Community and Public Health Nursing: Evidence for Practice 3rd Edition Pdf Chapters Download Community and Public Health Nursing: Evidence for Practice 3rd Edition Pdf Download Course Hero Community and Public Health Nursing: Evidence for Practice 3rd Edition Answers Quizlet Community and Public Health Nursing: Evidence for Practice 3rd Edition Ebook Download Course hero Community and Public Health Nursing: Evidence for Practice 3rd Edition Questions and Answers Community and Public Health Nursing: Evidence for Practice 3rd Edition Studocu Community and Public Health Nursing: Evidence for Practice 3rd Edition Quizlet Community and Public Health Nursing: Evidence for Practice 3rd Edition Stuvia Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Pdf Chapters Download Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Pdf Download Stuvia Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Study Guide Questions and Answers Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Ebook Download Stuvia Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Questions Quizlet Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Studocu Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Quizlet Community and Public Health Nursing: Evidence for Practice 3rd Edition Test Bank Stuvia
These lecture slides, by Dr Sidra Arshad, offer a quick overview of the physiological basis of a normal electrocardiogram.
Learning objectives:
1. Define an electrocardiogram (ECG) and electrocardiography
2. Describe how dipoles generated by the heart produce the waveforms of the ECG
3. Describe the components of a normal electrocardiogram of a typical bipolar lead (limb II)
4. Differentiate between intervals and segments
5. Enlist some common indications for obtaining an ECG
6. Describe the flow of current around the heart during the cardiac cycle
7. Discuss the placement and polarity of the leads of electrocardiograph
8. Describe the normal electrocardiograms recorded from the limb leads and explain the physiological basis of the different records that are obtained
9. Define mean electrical vector (axis) of the heart and give the normal range
10. Define the mean QRS vector
11. Describe the axes of leads (hexagonal reference system)
12. Comprehend the vectorial analysis of the normal ECG
13. Determine the mean electrical axis of the ventricular QRS and appreciate the mean axis deviation
14. Explain the concepts of current of injury, J point, and their significance
Study Resources:
1. Chapter 11, Guyton and Hall Textbook of Medical Physiology, 14th edition
2. Chapter 9, Human Physiology - From Cells to Systems, Lauralee Sherwood, 9th edition
3. Chapter 29, Ganong’s Review of Medical Physiology, 26th edition
4. Electrocardiogram, StatPearls - https://www.ncbi.nlm.nih.gov/books/NBK549803/
5. ECG in Medical Practice by ABM Abdullah, 4th edition
6. Chapter 3, Cardiology Explained, https://www.ncbi.nlm.nih.gov/books/NBK2214/
7. ECG Basics, http://www.nataliescasebook.com/tag/e-c-g-basics
1. Page 1/6
Safety Data Sheet
according to WHS Regulations
Printing date 28.01.2017 Revision: 28.01.2017
44.0
1 Identification
Product Name: ETHANOL 70%
Other Means of Identification: Mixture
Product Code: ETH.7-500, ETH.7-1L, ETH.7-2.5L, ETH.7-5L, ETH.7-10L, ETH.7-20L
Recommended Use of the Chemical and Restriction on Use:
Destainer, cleaner in hospitals and pathology laboratories.
Details of Manufacturer or Importer:
Amber Scientific Pty Ltd
Unit 2, 9 Elmsfield Road
Midvale WA 6056
Phone Number: 61 8 9250 7782
Emergency telephone number: 0427 190 933
2 Hazard(s) Identification
Hazardous Nature:
Classified as Hazardous according to the Globally Harmonised System of Classification and Labelling of
Chemicals (GHS) and Safe Work Australia criteria.
Classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by
Road and Rail (7th edition).
flame
Flammable Liquids 2 H225 Highly flammable liquid and vapour.
Serious Eye Damage/Irritation 2A H319 Causes serious eye irritation.
Signal Word Danger
Hazard Statements
H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
Precautionary Statements
P233 Keep container tightly closed.
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P241 Use explosion-proof electrical/ventilating/lighting equipment.
P280 Wear protective gloves / eye protection / face protection.
P240 Ground/bond container and receiving equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P264 Wash hands thoroughly after handling.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with
water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P370+P378 In case of fire: Use to extinguish: CO2, powder or water spray.
P403+P235 Store in a well-ventilated place. Keep cool.
(Contd. on page 2)
2. Page 2/6
Safety Data Sheet
according to WHS Regulations
Printing date 28.01.2017 Revision: 28.01.2017
Product Name: ETHANOL 70%
(Contd. of page 1)
44.0
P501 Dispose of contents/container in accordance with local/regional/national regulations.
3 Composition and Information on Ingredients
Chemical Characterization: Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Hazardous Components:
64-17-5 Ethanol Flammable Liquids 2, H225; Serious Eye Damage/Irritation 2A, H319 70%
4 First Aid Measures
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Seek medical attention if breathing problems develop.
Skin Contact:
In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and
soap. Seek medical attention if symptoms occur.
Eye Contact:
In case of eye contact, rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing. Seek immediate medical attention.
Ingestion:
If swallowed, do not induce vomiting. If vomiting occurs spontaneously, keep head below hips to prevent
aspiration. Do not give anything by mouth to an unconscious person. Seek immediate medical attention.
Symptoms Caused by Exposure:
Inhalation: May cause irritation to the nose, throat and respiratory system , dizziness, headache and possible
confusion
Skin Contact: May cause irritation to the skin, redness and itchiness.
Eye Contact: Causes eye irritation, tearing, pain, stinging and blurred vision.
Ingestion: May cause irritation to mouth, throat and gastrointestinal tract.
5 Fire Fighting Measures
Suitable Extinguishing Media: Dry chemical, carbon dioxide or foam.
Specific Hazards Arising from the Chemical:
Hazardous combustion products include oxides of carbon.
Product is highly flammable. Vapours may travel considerable distances to a source of ignition where they can
ignite, flashback, or explode.
Closed containers may explode when exposed to extreme heat. Containers close to fire should be removed if
safe to do so. Use water spray to cool fire exposed containers.
Special Protective Equipment and Precautions for Fire Fighters:
When fighting a major fire wear self-contained breathing apparatus and protective equipment.
6 Accidental Release Measures
Personal Precautions, Protective Equipment and Emergency Procedures:
Wear approved respiratory protection, chemical resistant gloves, protective clothing and safety boots.
Evacuate all non-essential personnel from affected area. Do not breathe vapours. Ensure adequate
ventilation. Extinguish all sources of ignition. Avoid sparks and open flames. No smoking.
Environmental Precautions:
In the event of a major spill, prevent spillage from entering drains or water courses.
(Contd. on page 3)
3. Page 3/6
Safety Data Sheet
according to WHS Regulations
Printing date 28.01.2017 Revision: 28.01.2017
Product Name: ETHANOL 70%
(Contd. of page 2)
44.0
Methods and Materials for Containment and Cleaning Up:
Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent material.
Collect the spilled material and place into a suitable container for disposal. Use only non-sparking tools.
7 Handling and Storage
Precautions for Safe Handling:
Use of safe work practices are recommended to avoid eye or skin contact and inhalation of vapours. Use only
outdoors or in a well-ventilated area.
Take precautionary measures against static discharge. Food, beverages and tobacco products should not be
stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or
using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide
eyewash fountains and safety showers in close proximity to points of potential exposure.
Conditions for Safe Storage:
Store in a cool, dry and well ventilated area. Keep container tightly closed when not in use. Protect from heat,
sparks, open flames and other sources of ignition. Keep away from strong oxidising agents, acids, alkalis,
amines and alcohols.
8 Exposure controls and personal protection
Exposure Standards:
64-17-5 Ethanol
WES TWA: 1880 mg/m³, 1000 ppm
Engineering Controls:
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapour below
occupational exposure standards.
Respiratory Protection:
Use an approved half-face respirator with organic vapour cartridge under conditions where exposure to the
substance is apparent (e.g. generation of high concentrations of mist or vapour, inadequate ventilation,
development of respiratory tract irritation) and engineering controls are not feasible. See Australian Standards
AS/NZS 1715 and 1716 for more information.
Skin Protection:
PVC, PVA, nitrile, neoprene, rubber or vinyl gloves. See Australian/New Zealand Standard AS/NZS 2161 for
more information.
When selecting gloves for use against certain chemicals, the degradation resistance, permeation rate and
permeation breakthrough time should be considered.
Occupational protective clothing (depending on conditions in which it has to be used, in particular as regards
the period for which it is worn, which shall be determined on the basis of the seriousness of the risk, the
frequency of exposure to the risk, the characteristics of the workstation of each worker and the performance of
the protective clothing). See Australian/New Zealand Standard AS/NZS 4501 for more information.
Eye and Face Protection:
Eye and face protectors for protection against splashing materials or liquids. See Australian/New Zealand
Standard AS/NZS 1337 for more information.
9 Physical and Chemical Properties
Appearance:
Form: Liquid
Colour: Clear
Odour: No information available
Odour Threshold: Not determined.
pH-Value: Not determined.
(Contd. on page 4)
4. Page 4/6
Safety Data Sheet
according to WHS Regulations
Printing date 28.01.2017 Revision: 28.01.2017
Product Name: ETHANOL 70%
(Contd. of page 3)
44.0
Melting point/freezing point: -117 °C
Initial Boiling Point/Boiling Range: 78 °C
Flash Point: 12 °C
Flammability: Highly flammable.
Auto-ignition Temperature: No information available
Decomposition Temperature: No information available
Explosion Limits:
Lower: 2.8 Vol %
Upper: 18.2 Vol %
Vapour Pressure at 20 °C: 59 hPa
Relative Density: No information available
Vapour Density: No information available
Evaporation Rate: No information available
Solubility in Water: Soluble in all proportions
10 Stability and Reactivity
Possibility of Hazardous Reactions: Hazardous polymerisation will not occur.
Chemical Stability: Stable at ambient temperature and under normal conditions of use.
Conditions to Avoid: Heat, sparks, open flames and other sources of ignition.
Incompatible Materials: Strong oxidising agents, acids, alkalis, amines and alcohols.
Hazardous Decomposition Products: Oxides of carbon.
11 Toxicological Information
Toxicity:
LD₅₀/LC₅₀ Values Relevant for Classification:
64-17-5 Ethanol
Oral LD₅₀ 7060 mg/kg (rat)
Inhalation LC₅₀/4 h 20000 mg/l (rat)
Acute Health Effects
Inhalation:
May cause irritation to the nose, throat and respiratory system , dizziness, headache and possible confusion
Skin: May cause irritation to the skin, redness and itchiness.
Eye: Causes eye irritation, tearing, pain, stinging and blurred vision.
Ingestion: May cause irritation to mouth, throat and gastrointestinal tract.
Skin Corrosion / Irritation: Based on classification principles, the classification criteria are not met.
Serious Eye Damage / Irritation: Causes serious eye irritation.
Respiratory or Skin Sensitisation: Based on classification principles, the classification criteria are not met.
Germ Cell Mutagenicity: Based on classification principles, the classification criteria are not met.
Carcinogenicity: This product does NOT contain any IARC listed chemicals.
Reproductive Toxicity: Based on classification principles, the classification criteria are not met.
Specific Target Organ Toxicity (STOT) - Single Exposure:
Based on classification principles, the classification criteria are not met.
Specific Target Organ Toxicity (STOT) - Repeated Exposure:
Based on classification principles, the classification criteria are not met.
(Contd. on page 5)
5. Page 5/6
Safety Data Sheet
according to WHS Regulations
Printing date 28.01.2017 Revision: 28.01.2017
Product Name: ETHANOL 70%
(Contd. of page 4)
44.0
Aspiration Hazard: Based on classification principles, the classification criteria are not met.
Chronic Health Effects: Prolonged or repeated skin contact may lead to dermatitis.
12 Ecological Information
Ecotoxicity: No information available
Aquatic toxicity: No information available
Persistence and Degradability: No information available
Bioaccumulative Potential: No information available
Mobility in Soil: No information available
Other adverse effects: No information available
13 Disposal considerations
Disposal Methods and Containers: Dispose according to applicable local and state government regulations.
Special Precautions for Landfill or Incineration:
Please consult your state Land Waste Management Authority for more information.
14 Transport information
UN Number
ADG, IMDG, IATA UN1170
Proper Shipping Name
ADG 1170 ETHANOL SOLUTION (ETHYL ALCOHOL
SOLUTION)
IMDG ETHANOL SOLUTION (ETHYL ALCOHOL SOLUTION)
IATA ETHANOL SOLUTION
Dangerous Goods Class
ADG Class: 3 (F1) Flammable liquids.
IMDG Class: 3 Flammable liquids.
Packing Group:
ADG, IMDG, IATA II
EMS Number: F-E,S-D
Hazchem Code: .2YE
Special Provisions: 144
Limited Quantities: 1L
Packagings & IBCs - Packing Instruction: P001, IBC02
Portable Tanks & Bulk Containers - Instructions: T4
Portable Tanks & Bulk Containers - Special
Provisions: TP1
15 Regulatory information
Australian Inventory of Chemical Substances:
64-17-5 Ethanol
7732-18-5 Water
(Contd. on page 6)
6. Page 6/6
Safety Data Sheet
according to WHS Regulations
Printing date 28.01.2017 Revision: 28.01.2017
Product Name: ETHANOL 70%
(Contd. of page 5)
44.0
Standard for the Uniform Scheduling of Drugs and Poisons (SUSMP) - Poison Schedule:
Not Scheduled.
16 Other information
Date of Preparation or Last Revision: 28.01.2017
Prepared by: MSDS.COM.AU Pty Ltd www.msds.com.au
Abbreviations and acronyms:
ADG: Australian Dangerous Goods
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonised System of Classification and Labelling of Chemicals
CAS: Chemical Abstracts Service (division of the American Chemical Society)
LC₅₀: Lethal concentration, 50 percent
LD₅₀: Lethal dose, 50 percent
IARC: International Agency for Research on Cancer
STEL: Short Term Exposure Limit
TWA: Time Weighted Average
NES: National Exposure Standard (Safe Work Australia - Workplace Exposure Standards For Airborne Contaminants)
Flammable Liquids 2: Flammable liquids – Category 2
Serious Eye Damage/Irritation 2A: Serious eye damage/eye irritation – Category 2A
Disclaimer
This SDS is prepared in accord with the Safe Work Australia document “Code of Practice for the Preparation
of Safety Data Sheets for Hazardous Chemicals - February 2016”
The information contained in this safety data sheet is provided in good faith and is believed to be accurate at
the date of issuance. Amber Scientific Pty Ltd makes no representation of the accuracy or
comprehensiveness of the information and to the full extent allowed by law excludes all liability for any loss or
damage related to the supply or use of the information in this material safety data sheet. MSDS.COM.AU Pty
Ltd is not in a position to warrant the accuracy of the data herein. The user is cautioned to make their own
determinations as to the suitability of the information provided to the particular circumstances in which the
product is used.