The document provides instructions for setting up and using the ESCENE Office IP Phone ES680-PEG. It includes the following sections:
1. Getting Started - Describes the phone features and setup.
2. Set up the Phone - Instructions for physically connecting the phone.
3. Phone User Interface - Overview of the phone interface, screen display, network settings, SIP account settings, basic call features, and advanced settings that can be accessed through the phone's keypad.
4. WEB User Interface - Instructions for accessing additional settings through the phone's web UI, including network settings, SIP accounts, programmable keys, and other phone options.
This document contains a training record for Darren Mason with vantage number 762500. It lists 27 courses or certifications he has completed between 2005 and 2015 related to offshore safety. The courses include basic offshore safety induction, emergency response training, rigging, lifting operations, and other offshore safety topics. All listed courses were approved.
Samsung ARTIK 050 (ARTIK ZERO) Modules Data SheetRyo Jin
Samsung ARTIK is an end-to-end, integrated IoT Platform that transforms the process of developing, launching and managing connected products. The ARTIK 050 module is specifically built to provide secure IoT connectivity for products across vertical markets, including smart home, smart lighting, smart building, manufacturing, and health and wellness.
Sanjeet Singh was awarded an Alstom International EHS Passport certificate for successfully completing an environmental, health, and safety course at the EQF level 2. The certificate was approved and accredited by the Institute of Occupational Safety and Health in association with ALSTOM. It was issued on April 29, 2016 and expires on April 30, 2019.
This document certifies that Ali Elbik has been issued a Certificate of Qualification as an Operating Engineer Third Class - Provincial by the Technical Standards and Safety Authority of Ontario. The certificate, numbered OE00066130, was issued on September 14, 2015 and is valid until September 17, 2016. It certifies that Ali Elbik has complied with the Technical Standards and Safety Act and Operating Engineers Regulation.
Escene ceiling public broadcasting ip phone ps760 user manualEmre Ozcan
This document provides instructions for configuring and maintaining a Public Broadcasting IP Speaker. It describes installing the speaker in a ceiling, logging into the web management interface, and adjusting various network, account, and audio settings. It also covers maintaining the speaker through logs, software upgrades, and resetting to factory defaults if needed. The document aims to help users quickly set up and use the IP speaker for public broadcasting applications.
This document is the user manual for the IC-3116W camera. It contains information about package contents, hardware installation, camera setup using the EdiView app and EdiView Finder software, as well as details on the web-based management interface for configuring camera settings like video, events, storage, system settings and more. The manual provides step-by-step instructions and screenshots to guide users through setup and configuration of the camera.
Here are the steps to add a new Sub Administrator:
1. Click the "New Sub Admin" button under the Admin section.
2. In the "Add New Sub Administrator" page, enter a username for the Sub Admin (e.g. sub_admin).
3. Enter and confirm a password for the Sub Admin (e.g. 12345).
4. Click "OK" to add the new Sub Administrator. The new Sub Admin will now appear in the Admin list with "Read Only" privilege.
The main Administrator maintains full "Read/Write" privilege and can modify or remove any Sub Administrators. Sub Administrators only have read-only access to monitor the system.
This document provides information about the Escene Wi-Fi Access Point AP-3, including:
- An overview of the product, its package contents, appearance, LED indicators, ports, and label information.
- Requirements and installation guide for using the AP-3 with Escene 5.8G Wi-Fi IP phones.
- Instructions for managing and configuring the AP-3 through its web user interface, including how to log in, commonly used buttons and features, and setting up the operating mode.
This document contains a training record for Darren Mason with vantage number 762500. It lists 27 courses or certifications he has completed between 2005 and 2015 related to offshore safety. The courses include basic offshore safety induction, emergency response training, rigging, lifting operations, and other offshore safety topics. All listed courses were approved.
Samsung ARTIK 050 (ARTIK ZERO) Modules Data SheetRyo Jin
Samsung ARTIK is an end-to-end, integrated IoT Platform that transforms the process of developing, launching and managing connected products. The ARTIK 050 module is specifically built to provide secure IoT connectivity for products across vertical markets, including smart home, smart lighting, smart building, manufacturing, and health and wellness.
Sanjeet Singh was awarded an Alstom International EHS Passport certificate for successfully completing an environmental, health, and safety course at the EQF level 2. The certificate was approved and accredited by the Institute of Occupational Safety and Health in association with ALSTOM. It was issued on April 29, 2016 and expires on April 30, 2019.
This document certifies that Ali Elbik has been issued a Certificate of Qualification as an Operating Engineer Third Class - Provincial by the Technical Standards and Safety Authority of Ontario. The certificate, numbered OE00066130, was issued on September 14, 2015 and is valid until September 17, 2016. It certifies that Ali Elbik has complied with the Technical Standards and Safety Act and Operating Engineers Regulation.
Escene ceiling public broadcasting ip phone ps760 user manualEmre Ozcan
This document provides instructions for configuring and maintaining a Public Broadcasting IP Speaker. It describes installing the speaker in a ceiling, logging into the web management interface, and adjusting various network, account, and audio settings. It also covers maintaining the speaker through logs, software upgrades, and resetting to factory defaults if needed. The document aims to help users quickly set up and use the IP speaker for public broadcasting applications.
This document is the user manual for the IC-3116W camera. It contains information about package contents, hardware installation, camera setup using the EdiView app and EdiView Finder software, as well as details on the web-based management interface for configuring camera settings like video, events, storage, system settings and more. The manual provides step-by-step instructions and screenshots to guide users through setup and configuration of the camera.
Here are the steps to add a new Sub Administrator:
1. Click the "New Sub Admin" button under the Admin section.
2. In the "Add New Sub Administrator" page, enter a username for the Sub Admin (e.g. sub_admin).
3. Enter and confirm a password for the Sub Admin (e.g. 12345).
4. Click "OK" to add the new Sub Administrator. The new Sub Admin will now appear in the Admin list with "Read Only" privilege.
The main Administrator maintains full "Read/Write" privilege and can modify or remove any Sub Administrators. Sub Administrators only have read-only access to monitor the system.
This document provides information about the Escene Wi-Fi Access Point AP-3, including:
- An overview of the product, its package contents, appearance, LED indicators, ports, and label information.
- Requirements and installation guide for using the AP-3 with Escene 5.8G Wi-Fi IP phones.
- Instructions for managing and configuring the AP-3 through its web user interface, including how to log in, commonly used buttons and features, and setting up the operating mode.
The document provides information about the SIMATIC S7-1500/ET 200MP Analog Input Module AI 8xU/I HS. It includes sections on properties, functions, wiring, parameters, interrupts, diagnostics, technical specifications, and dimensions. The module allows high-speed analog input measurement for up to 8 channels and supports voltage or current input types. It provides interrupts, diagnostics, and parameter assignment capabilities.
The document is a user manual for the ES210 IP Smart VoIP Phone by Escene Communication. It provides instructions on setting up the phone and describes its key features and user interface. The phone has a 128x64 pixel LCD display, supports multiple languages, uses HD voice technology for high quality calls, and has features like call holding, conferencing, and access to different phone books. The manual explains how to configure network settings, SIP accounts, and other phone options either through the phone's keypad interface or web user interface.
Polycom soundstation ip7000 set up guidebest4systems
The document provides setup instructions for connecting the Polycom SoundStation IP 7000 conference phone to a network and power source. It describes how to connect the phone using Power over Ethernet, AC power for a single phone, AC power for a single phone with a multi-interface module, and AC power for two phones connected with a multi-interface module. It also provides instructions for connecting optional external microphones and other accessories.
This document provides instructions for installing, uninstalling, and using the TM-T88V software and utilities, describing the supported operating systems, installation types including easy and custom install, how to access manuals, differences by OS, and replacing older TM printer models with the TM-T88V.
This document provides a user guide for an LG phone model LG-H815. It includes sections on phone layout and features, installation of SIM cards and batteries, device setup and use, making calls, managing contacts, messaging, camera use, and connecting to networks and devices. The guide provides setup instructions, descriptions of menu options, and tips for phone operation in short form instructions and lists.
The document is a system manual that provides information about installing, programming, and configuring S7-200 SMART CPUs and expansion modules, including an overview of the products, new features, communication options, and instructions for connecting to a CPU and creating a sample program.
The document provides instructions for installing the Advanced Printer Driver Version 4 for EPSON TM printers and customer displays. It describes the package contents, supported operating systems and models. The document outlines the standard installation process and additional options like silent installation, custom installation and adding a shared printer. Instructions are provided for connecting TM printers and customer displays via various interface types and testing the installation.
This document provides an overview and instructions for using the Speereo Voice Translator software. It includes sections on installation, copyright and registration, the translator features, how to use the translator, program setup, the included travel guide, online weather forecasts, updating languages and guides, online flight schedules and status, a currency calculator, and troubleshooting. The document serves as a user manual for the voice translation software.
Escene es380 pg office ip phone user manualEmre Ozcan
This document provides instructions for setting up and using the Office IP Phone ES380. It includes information about:
- The packaging contents and hardware components of the phone.
- Installing the phone by adjusting the bracket, connecting the handset and network/power.
- The phone user interface, including screen display features and functions of hardware components.
- Basic network settings like Wi-Fi, static IP, and DHCP.
- Configuring SIP account settings and basic call features from the phone interface.
- Advanced settings that can be configured from the phone's web user interface like network, SIP accounts, DSS keys, settings and maintenance options.
This document is a user guide for a Tenda wireless network adapter. It contains instructions for installing the hardware and software, including installing drivers from the included CD. It describes the LED indicator and features of the adapter. It also provides guidance on using the Windows built-in wireless configuration features to connect to a wireless network if the Tenda configuration software is not installed. The document is organized into chapters covering product introduction, installation, using Windows wireless settings, and the Tenda wireless utility.
How to use WIFI XTUNER E3 OBDII Diagnostic Tool Enzo C
The document is the user manual for the XTUNTER-E3 diagnostic tool. It provides instructions on installing the software, activating the product online, downloading vehicle coverage, and introduces the main functions of the software. These include accessing the online store for updates, using the diagnosis system to test vehicles, setting language/units, querying DTCs, performing tests and resets, and more. Screenshots illustrate the various software screens and steps to connect to a vehicle.
The document provides instructions for using the Spectralink Installation & Configuration (SLIC) tool to configure Spectralink 87-Series wireless handsets. It describes connecting the SLIC unit and a laptop, running the wireless wizard on the SLIC to configure network settings, and using a USB connection to load the settings onto each handset. It recommends always using the latest versions of the SLIC software and phone code for compatibility. The document also provides troubleshooting tips and references for additional documentation.
This document provides an overview of the hypervisor domain in network functions virtualization (NFV) infrastructure. It defines the external interface between the hypervisor and virtualized infrastructure manager (VIM). The document also outlines key requirements for the hypervisor domain, including portability, elasticity, resiliency, security, and energy efficiency. Service models that can be supported by the hypervisor are also described at a high level.
Vpecker E4 Diagnostic Tool User Manual OBDII365OBD365
Original Wifi Idutex Vpecker E4 Professional Diagnostic Tablet with Coding and Programming Function http://www.obdii365.com/wholesale/vpecker-e4-8inch-pad-obdii-scanner.html
The document provides instructions for setting up Fonality Connect, including:
1) Activating IP phones by connecting them to the network and powering them on.
2) Installing softphone software and entering license keys during setup.
3) Configuring E911 settings by entering accurate address information for each device.
4) Editing extension details and options such as voicemail settings, call routing, and appearances.
5) Setting up the auto attendant using the scheduler, recording voice prompts, creating submenus, and editing the call menu to control the caller experience.
The EPLAN interface includes a title bar, menu bar, page navigator, graphical preview, and toolbars. The title bar shows the program name and open page. The menu bar provides program commands. The page navigator displays project pages in a tree or list view. The graphical preview shows a minimized view of selected pages. Toolbars offer quick access to common functions via buttons.
Tizen ivi 3.0 m2 kernel 3.10 ltsi linux support package for the intel atom pr...Ryo Jin
This document provides instructions for installing Tizen IVI 3.0 M2 with a customized kernel version 3.10.28 on an Intel Atom E3800 series platform. It describes downloading the Tizen image, compiling the kernel, installing drivers for graphics, audio, and other components, and rebooting the system. The goal is to set up Tizen IVI and integrate the Intel Embedded and Mobile Graphics Driver on the Intel customer reference board for evaluation and testing.
This document is a user manual that provides information about safety, device usage, and technical support for a ZTE mobile device:
- It includes sections on getting started with the device, personalizing settings, understanding basic functions, connecting to networks and other devices, making phone calls, managing contacts, setting up email accounts, and using the Gmail app.
- The manual provides instructions for tasks like turning the device on and off, charging the battery, navigating the interface, entering and editing text, syncing accounts, responding to emails, and placing or receiving calls.
- It also contains legal disclaimers and information for getting additional support from ZTE's website.
Quick Installation Guide Captive Portal Hotspotsystems EnglishEnGenius Europe
This document provides a quick installation guide for setting up an EnGenius Captive Portal Ready wireless network. It outlines the steps to install the first device, including signing up for an account on the hotspotsystem.com portal and configuring basic device settings. It then describes how to install additional devices by connecting them wirelessly or via Ethernet and configuring them using the hotspotsystem portal. Troubleshooting tips are also provided for issues like not seeing expected SSIDs or connecting to secured networks.
This document provides a user manual for the ES280 IP phone. It details the phone's hardware components, screen display features, basic and advanced call features, network and SIP account settings, and web user interface settings. The manual covers making and receiving calls, call logs, contacts, conferencing, call forwarding and other basic call functions. It also describes how to set the phone's language, time/date, ring tones and volume. Advanced sections cover the web UI, phone book, maintenance and password settings.
More Related Content
Similar to Escene es680 peg office ip phone user manual
The document provides information about the SIMATIC S7-1500/ET 200MP Analog Input Module AI 8xU/I HS. It includes sections on properties, functions, wiring, parameters, interrupts, diagnostics, technical specifications, and dimensions. The module allows high-speed analog input measurement for up to 8 channels and supports voltage or current input types. It provides interrupts, diagnostics, and parameter assignment capabilities.
The document is a user manual for the ES210 IP Smart VoIP Phone by Escene Communication. It provides instructions on setting up the phone and describes its key features and user interface. The phone has a 128x64 pixel LCD display, supports multiple languages, uses HD voice technology for high quality calls, and has features like call holding, conferencing, and access to different phone books. The manual explains how to configure network settings, SIP accounts, and other phone options either through the phone's keypad interface or web user interface.
Polycom soundstation ip7000 set up guidebest4systems
The document provides setup instructions for connecting the Polycom SoundStation IP 7000 conference phone to a network and power source. It describes how to connect the phone using Power over Ethernet, AC power for a single phone, AC power for a single phone with a multi-interface module, and AC power for two phones connected with a multi-interface module. It also provides instructions for connecting optional external microphones and other accessories.
This document provides instructions for installing, uninstalling, and using the TM-T88V software and utilities, describing the supported operating systems, installation types including easy and custom install, how to access manuals, differences by OS, and replacing older TM printer models with the TM-T88V.
This document provides a user guide for an LG phone model LG-H815. It includes sections on phone layout and features, installation of SIM cards and batteries, device setup and use, making calls, managing contacts, messaging, camera use, and connecting to networks and devices. The guide provides setup instructions, descriptions of menu options, and tips for phone operation in short form instructions and lists.
The document is a system manual that provides information about installing, programming, and configuring S7-200 SMART CPUs and expansion modules, including an overview of the products, new features, communication options, and instructions for connecting to a CPU and creating a sample program.
The document provides instructions for installing the Advanced Printer Driver Version 4 for EPSON TM printers and customer displays. It describes the package contents, supported operating systems and models. The document outlines the standard installation process and additional options like silent installation, custom installation and adding a shared printer. Instructions are provided for connecting TM printers and customer displays via various interface types and testing the installation.
This document provides an overview and instructions for using the Speereo Voice Translator software. It includes sections on installation, copyright and registration, the translator features, how to use the translator, program setup, the included travel guide, online weather forecasts, updating languages and guides, online flight schedules and status, a currency calculator, and troubleshooting. The document serves as a user manual for the voice translation software.
Escene es380 pg office ip phone user manualEmre Ozcan
This document provides instructions for setting up and using the Office IP Phone ES380. It includes information about:
- The packaging contents and hardware components of the phone.
- Installing the phone by adjusting the bracket, connecting the handset and network/power.
- The phone user interface, including screen display features and functions of hardware components.
- Basic network settings like Wi-Fi, static IP, and DHCP.
- Configuring SIP account settings and basic call features from the phone interface.
- Advanced settings that can be configured from the phone's web user interface like network, SIP accounts, DSS keys, settings and maintenance options.
This document is a user guide for a Tenda wireless network adapter. It contains instructions for installing the hardware and software, including installing drivers from the included CD. It describes the LED indicator and features of the adapter. It also provides guidance on using the Windows built-in wireless configuration features to connect to a wireless network if the Tenda configuration software is not installed. The document is organized into chapters covering product introduction, installation, using Windows wireless settings, and the Tenda wireless utility.
How to use WIFI XTUNER E3 OBDII Diagnostic Tool Enzo C
The document is the user manual for the XTUNTER-E3 diagnostic tool. It provides instructions on installing the software, activating the product online, downloading vehicle coverage, and introduces the main functions of the software. These include accessing the online store for updates, using the diagnosis system to test vehicles, setting language/units, querying DTCs, performing tests and resets, and more. Screenshots illustrate the various software screens and steps to connect to a vehicle.
The document provides instructions for using the Spectralink Installation & Configuration (SLIC) tool to configure Spectralink 87-Series wireless handsets. It describes connecting the SLIC unit and a laptop, running the wireless wizard on the SLIC to configure network settings, and using a USB connection to load the settings onto each handset. It recommends always using the latest versions of the SLIC software and phone code for compatibility. The document also provides troubleshooting tips and references for additional documentation.
This document provides an overview of the hypervisor domain in network functions virtualization (NFV) infrastructure. It defines the external interface between the hypervisor and virtualized infrastructure manager (VIM). The document also outlines key requirements for the hypervisor domain, including portability, elasticity, resiliency, security, and energy efficiency. Service models that can be supported by the hypervisor are also described at a high level.
Vpecker E4 Diagnostic Tool User Manual OBDII365OBD365
Original Wifi Idutex Vpecker E4 Professional Diagnostic Tablet with Coding and Programming Function http://www.obdii365.com/wholesale/vpecker-e4-8inch-pad-obdii-scanner.html
The document provides instructions for setting up Fonality Connect, including:
1) Activating IP phones by connecting them to the network and powering them on.
2) Installing softphone software and entering license keys during setup.
3) Configuring E911 settings by entering accurate address information for each device.
4) Editing extension details and options such as voicemail settings, call routing, and appearances.
5) Setting up the auto attendant using the scheduler, recording voice prompts, creating submenus, and editing the call menu to control the caller experience.
The EPLAN interface includes a title bar, menu bar, page navigator, graphical preview, and toolbars. The title bar shows the program name and open page. The menu bar provides program commands. The page navigator displays project pages in a tree or list view. The graphical preview shows a minimized view of selected pages. Toolbars offer quick access to common functions via buttons.
Tizen ivi 3.0 m2 kernel 3.10 ltsi linux support package for the intel atom pr...Ryo Jin
This document provides instructions for installing Tizen IVI 3.0 M2 with a customized kernel version 3.10.28 on an Intel Atom E3800 series platform. It describes downloading the Tizen image, compiling the kernel, installing drivers for graphics, audio, and other components, and rebooting the system. The goal is to set up Tizen IVI and integrate the Intel Embedded and Mobile Graphics Driver on the Intel customer reference board for evaluation and testing.
This document is a user manual that provides information about safety, device usage, and technical support for a ZTE mobile device:
- It includes sections on getting started with the device, personalizing settings, understanding basic functions, connecting to networks and other devices, making phone calls, managing contacts, setting up email accounts, and using the Gmail app.
- The manual provides instructions for tasks like turning the device on and off, charging the battery, navigating the interface, entering and editing text, syncing accounts, responding to emails, and placing or receiving calls.
- It also contains legal disclaimers and information for getting additional support from ZTE's website.
Quick Installation Guide Captive Portal Hotspotsystems EnglishEnGenius Europe
This document provides a quick installation guide for setting up an EnGenius Captive Portal Ready wireless network. It outlines the steps to install the first device, including signing up for an account on the hotspotsystem.com portal and configuring basic device settings. It then describes how to install additional devices by connecting them wirelessly or via Ethernet and configuring them using the hotspotsystem portal. Troubleshooting tips are also provided for issues like not seeing expected SSIDs or connecting to secured networks.
Similar to Escene es680 peg office ip phone user manual (20)
This document provides a user manual for the ES280 IP phone. It details the phone's hardware components, screen display features, basic and advanced call features, network and SIP account settings, and web user interface settings. The manual covers making and receiving calls, call logs, contacts, conferencing, call forwarding and other basic call functions. It also describes how to set the phone's language, time/date, ring tones and volume. Advanced sections cover the web UI, phone book, maintenance and password settings.
The document is a user manual for the ES270-C IP Smart VoIP Phone. It provides instructions on setting up the phone and describes its key features and functions. The phone has a color LCD screen and keypad buttons. It supports features like multiple SIP accounts, call logs, phone books, call holding, conferencing, and more. The manual explains how to access settings via the phone's menu and web interface to configure network settings, accounts, and other phone options.
Escene es620 series ip phone user manual enEmre Ozcan
The document provides a user manual for the Escene 620 Series IP Phone. It describes the phone's features such as the 4.3" LCD screen, 8 programmable line keys that support busy lamp field functionality, support for up to 4 expansion modules with 128 programmable buttons total, and advanced calling features including call forwarding, call transfer, and 3-way conferencing. It also provides setup instructions, an overview of the phone buttons and interfaces, and specifications for the phone.
Escene es330 peg ip phone user manual enEmre Ozcan
The document provides instructions for using the ES330-PEG IP phone, including:
1) Connecting the phone by plugging in the handset cord, Ethernet cable, and power adapter.
2) An overview of the phone buttons and screen features to understand how to place, answer, and end calls.
3) Basic call handling instructions for placing calls using the handset, speakerphone, headset, redialing, and calling from call logs. The document also covers answering calls and ending calls.
This document provides a user manual for the ES282 IP VoIP phone by Escene Communication Co. Ltd. It covers:
- Setting up the phone by attaching the bracket, connecting the handset and network/power.
- An overview of the phone interface including hardware components like screen, keys and ports as well as screen display features.
- Instructions for basic network and SIP account settings including options for DHCP, static IP, PPPoE and configuring SIP accounts.
- Descriptions of the phone's basic and advanced call features that can be accessed via keys or web interface. These include making and receiving calls, call logs, conferencing, forwarding and more.
- Details
The document is a user manual for the ES282-PC IP Smart VoIP Phone. It provides instructions on setting up the phone and describes its key features and functions. The phone has a color LCD screen, supports multiple SIP accounts and lines, and allows users to place and receive calls, access call logs and contacts, and adjust settings through either the phone's interface or a web UI. The manual guides users through basic call operations, advanced settings, and phone maintenance to help them successfully use the ES282-PC VoIP phone.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Infrastructure Challenges in Scaling RAG with Custom AI modelsZilliz
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
2. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Copyright and Disclaimer
Copyright
Any enterprises or individuals cannot extract, copy and spread in any form of this document without our written
permission .In accordance with the law, copying includes translating the document into other languages or conversing into
other formats. When this document is transmitted in network media, escene Limited Ltd allows downloading or printing for
private use. Any parts of the document are not allowed to be modified or used for commercial purposes. escene Limited Ltd
will not assume any responsibility for the injuries and losses caused by any unauthorized modification or conversion of the
document.
Declaration
Information regarding this guide is subject to change without any notice.
This manual provides accurate statement, information and recommendation to the largest extent, but will not guarantee any
express or implies. Users should take full responsibility for the application of products. escene Limited Ltd will not make any
guarantee for this manual, including but not limited to warranties for implies merchantability and particular purposes.
escene Limited Ltd does not assume any responsibility for indirect or consequential loss caused by the misuse of this
manual.
About this manual
Thank you for choosing Office IP Phone ES680-PEG.This IP Phone is specially designed for the user under the Office with
fashionable appearance and complete functions. This manual aims to help you quickly use Office IP Phone ES680-PEG.
Before use, please read the packing list and safety notes section of this manual ,communicate with the system
administrator to confirm if the current network environment can meet the requirements of configuring the Phone. If this is
your first time to use Office IP Phone ES680-PEG, we recommend that you should read the quick operation guide and
product technical manual. The document can be downloaded from the following website: http://www.escene.cn/en.
This document updated and revised by Nolto informatics and telecommunications, Escene Turkey distributor
(www.nolto.com) at June 2020.
Summary
Copyright and Disclaimer.......................................................................................................................2
1. Getting Started ....................................................................................................................................5
1.1 About...................................................................................................................................................5
1.2 Feature Highlights ...............................................................................................................................5
2. Set up the Phone.................................................................................................................................5
3. Phone User Interface ..........................................................................................................................9
3.1 Hardware Component Instructions......................................................................................................9
3.2 Phone Screen Display Features........................................................................................................10
3.3 Basic Network Settings .....................................................................................................................12
3.4 SIP Account Settings.........................................................................................................................13
3.5 Basic Features. .................................................................................................................................14
3.5.1 Making a Call..................................................................................................................................14
3. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
3.5.2 Anonymous Call .............................................................................................................................14
3.5.3 Redial.............................................................................................................................................14
3.5.4 Call Log..........................................................................................................................................15
3.5.5 Making Calls to Contact .................................................................................................................15
3.5.6 Multi-lines to Answer the Call .........................................................................................................15
3.5.7 Auto-Answer...................................................................................................................................15
3.5.8 Ending a Call..................................................................................................................................16
3.5.9 Using Hold and Recover (Switch Calling Line)...............................................................................16
3.5.10 Transferring Calls .........................................................................................................................16
3.5.11 Using Mute ...................................................................................................................................17
3.5.12 Do Not Disturb..............................................................................................................................17
3.5.13 3-way Conference ........................................................................................................................17
3.5.14 Voice Mail.....................................................................................................................................18
3.5.15 MPL..............................................................................................................................................18
3.6 Advanced Settings.............................................................................................................................19
3.6.1 Using the phone book ....................................................................................................................19
3.6.2 Using Call Logs ..............................................................................................................................21
3.6.3 Peer-to-Peer...................................................................................................................................22
3.7 Keypad Setting..................................................................................................................................22
3.7.1 Language Setting ...........................................................................................................................22
3.7.2 Message.........................................................................................................................................22
3.7.3 Time & Date....................................................................................................................................22
3.7.4 Ring Tone and Volume Setting .......................................................................................................23
3.7.5 Searching Phone Book...................................................................................................................23
3.7.6 Cannot Set the Features with Keypad............................................................................................24
4. WEB User Interface...........................................................................................................................24
4.1 Network.............................................................................................................................................25
4.1.1 Wi-Fi Setting...................................................................................................................................25
5 SIP Account ........................................................................................................................................31
5.1Basic ..................................................................................................................................................31
5.2 Advanced ..........................................................................................................................................33
6 DSS Keys ............................................................................................................................................35
6.1 Paperless Program keys ...................................................................................................................35
6.2 Line Keys ..........................................................................................................................................36
6.3 Function Keys....................................................................................................................................36
6.4 Soft Key.............................................................................................................................................37
7 Settings...............................................................................................................................................38
7.1 Basic .................................................................................................................................................38
7.2 Features............................................................................................................................................39
7.3 Time Settings ....................................................................................................................................42
7.4 Keyboard Lock ..................................................................................................................................43
7.5 VoIP Call Forwarding.........................................................................................................................43
7.6 Remote Control .................................................................................................................................43
7.7 Action URL ........................................................................................................................................44
4. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
7.8 EP+ ...................................................................................................................................................44
7.9 Audio .................................................................................................................................................45
7.10 Ring.................................................................................................................................................46
7.10 Dial Plan..........................................................................................................................................47
7.11 BLF Setting......................................................................................................................................48
7.12 TR069 .............................................................................................................................................50
7.13 MPL.................................................................................................................................................50
8 Phone Book..........................................................................................................................................50
8.1 Contact..............................................................................................................................................51
8.2 Group ................................................................................................................................................51
8.3 LDAP.................................................................................................................................................52
8.4 Blacklist.............................................................................................................................................53
8.5 Phone Call Info..................................................................................................................................54
9 Maintenance .......................................................................................................................................54
9.1 HTTP Upgrade ..................................................................................................................................55
9.2 FTP Upgrade.....................................................................................................................................55
9.3 TFTP Upgrade...................................................................................................................................56
9.4 Auto Provisioning...............................................................................................................................57
9.5 Log ....................................................................................................................................................59
9.5 Local Log...........................................................................................................................................60
Check the log file on the local. ................................................................................................................60
9.6 Default Settings.................................................................................................................................60
9.7 Reboot...............................................................................................................................................60
10 Security.............................................................................................................................................60
10.1 Password .......................................................................................................................................60
10.2 Trusted Certificates .........................................................................................................................61
10.3 IP Strategy.......................................................................................................................................61
11 WEB Other Settings or Information - Appendix.............................................................................61
11.1 Logout .............................................................................................................................................61
11.2 Note Tips .........................................................................................................................................61
5. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
1. Getting Started
1.1 About
Escene ES680-PEG is a feature-added IP Phone. Using 4.5’ 480x854 pixel color backlight screen and except normal
features of a 8 lines HD IP Phone, after connection through bluetooth, MPL feature will allow you to use handset or speaker
to answer the call for cell phone, you can even transfer the call to IPPBX. Of cause, you can also use it to talk with the third
party UC client like Microsoft LYNC, Skype, Whatsapp. The convenient power-charing stand provides you nice experience
when you use it for a video conference call. It comes with an EP+ communication APP which can all you use the cell phone
to make an IP Phone call, switching talking, etc.
NOTE: Only U6S model support MPL feature.
1.2 Feature Highlights
a) Multi-Language
The LCD display supports Multi-Language.
b) HD Voice
Special voice processing technology, high-fidelity voice quality, HD encoding, HD Handset, ensure clear, realistic smooth
communication.
c) Senior Calling Ability
8 lines with double color(GREEN & RED) LEDs, Synchronously control or manage 8 calls, Call queue, Switch
between lines. Multi-parties conference, call transfer.
d) All kinds of Phone Book
It supports XML Personal Phone BookLDAPEnterprise Phone Book etc. This feature satisfies customer's
phone book requirements.
e) Support HTTPTFTPFTPAuto-Provision.
f) 2 gigabit Ethernet ports, built-in POE,built-in bluetooth.
g) Multi-angle adjustable bracket.
h) Up to 80 programmable keys, (8 lines+ 72 paperless programmable keys).
i) MPL&EP+ Support external APPLE/Android mobile phone.
j) 2 built-in USB interface, USB1 support external UniWIFI / UniBT adapter. USB2(near EXT port) only for
charging.
k) Support EHS and EXT support connect USM18-LCD expansion module.
2. Set up the Phone
a) Packing List:
Check the packing list before installation, if you find anything missing, contact your system administrator.
⚫ 1*ES680-PEG IP Phone
⚫ 1*Handset
7. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
NOTE: The cable install method is short A connect the handset, longer B connect the IP Phone.
b) Phone Installation:
This section introduces how to install the phone with the components in the packing list:
⚫ Adjust the Bracket
⚫ Connect the Handset and optional Headset
⚫Connect the Network and Power
Adjust the Bracket
Pls follow the following picture to let the bracket adjust to safety
Connect the Handset and optional Headset
8. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Connect the Network and Power
You have two options for power supply. Your system administrator will advise you which one to use.
⚫ AC power adapter
⚫ POE(Power over Ethernet) IEEE802.3af
⚫ USB(Standard 0.5A)
Note: If inline power (PoE:Power over Ethernet) is provided, you don’t need to connect the power adapter. Make sure
9. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
the Ethernet cable and hub/switch are PoE compliant; The EXT port can also be used to connect the expansion
module ESM18-LCD.
3. Phone User Interface
3.1 Hardware Component Instructions
The main hardware components of the ES680-PEG IP Phone are the LCD screen and the keypad.
Hardware component instructions of the ES680-PEG IP Phone are:
ITEM DESCRIPTION
LCD Screen Displayed information about calls, messages, soft keys, time, date and other
relevant data:
• Call information — caller ID, call duration
• Icons (e.g. )
• Missed calls or second incoming caller's information
•Time and date
Light Status White-Flashing: There is an incoming call or be Hold.
White-Steady: Hook-off. or be in an usual conversation.
Line Key Green-Steady: There is a conversation making on the line
Red-Flashing: There is call coming in
Green-Flashing: The line is on hold
Dark: Accounts are idle
Soft Key Labels automatically to identity their context-sensitive features
Navigation Key Scroll through the displayed information, and in the idle feature:
UP: Open the "All CONTACT LOG"
10. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
DOWN: Open the "MISSED CALL"
RIGHT: Open the "RECEIVED CALL"
LEFT: Open the "DAIL CALL"
OK Key Confirm the action
C Key Cancels actions or rejects an incoming call, and the other feature:
In the idle: Open the "Phone Status".
Diagnosis: Press and hold 3 second to open "Hardware Diagnosis".
MUTE: "MUTE" feature is enabled if you press it while the conversation
making on the phone.
Functions Key MessageRedialTransferHold
Speaker Key Toggles the hands-free speaker phone mode.
Mic Voice input
Volume Key Adjusts the volume of the handset, headset, speaker and ringer
Keypad Provides the digits, letters and special characters in context-sensitive
applications.
Headset Key Toggles and indicates the headset mode.
3.2 Phone Screen Display Features
If the phone has successfully started up and after using, the idle LCD display will show information as below:
11. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
ITEM DESCRIPTION
1 TIME & DATE TIME & DATE display in the middle of the screen.
2 Auto-Answer icon Enable this feature, it will display "AA" at the top right corner.
3 Missed Call Missed Call under the TIME in the middle of screen
4 Line Status There are four status as below:
a. LAN:Disconnect :Disconnect the network
b. :Account failed to register
c. :Account successfully registered
d. :Account successfully registered and DND feature is enabled. The
DND icon also will display at the top right corner.
5 Soft Key Area Labels automatically to identity their context-sensitive features
12. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
6 Screen Icon The Screen Top Icon from left to right is:
: Handset Hand on status
:Speaker Hand on status
:Headset Hand on status
:Call MUTE
:Missed Call
:Call Forward
:Text Message
:Keypad Lock
:Network is unavailable
3.3 Basic Network Settings
The phone supports Three Modes of Network Setting. Include Wi-Fi SettingStatic IPDHCP.
Wi-Fi Setting
Note: This feature must be work with UniWIFI device. More about this, pls contact your system administrator.
In order to more easily and quickly implement Wi-Fi series phone deployment, we provide EWFC(Enhanced WIFI Fast
Connection) technology to implement automatic connection between the 5.8G Wi-Fi phone and AP-3.
Note: This feature must be work with AP-3 device. More about this, pls contact your system administrator.
①When the AP-3 is set up wireless parameters by the administrator, you can long press "ok" to enter the password to
connect it.
②If you don’t use EWFC rapid deployment, you can According to the normal method for manual connection and settings
as following:
Feature Operating Steps
Wi-Fi Press OK or MENU> System Settings> Advanced Settings> Password(Default is
Empty)> Network> Wi-Fi Setting
⚫ Press Wi-Fi Setting to login in to the menu
⚫ Select "Wi-Fi", and choose “enable”
⚫ Press "Save" key
⚫ Select “Hotspot List”
⚫ Press "Enter" key
13. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
⚫ Select the hotspot which you want to connect
⚫ Enter “Password”
⚫ Press "OK" key to make it work
DHCP Setting
Feature Operating Steps
DHCP Press OK or MENU> System Settings> Advanced Settings> Password(Default is
Empty)> Network> IP Setting
⚫ Press IP Setting to login in to the menu
⚫ Select "DHCP" mode
⚫ Press "Enter" key
⚫ Set the DNSweb porttelnet port
⚫ Press "Save" key to make it work
⚫ Tips "Network is changed, press OK reboot "
Static IP Setting
Feature Operating Steps
Static IP Press OK or MENU> System Settings> Advanced Settings> Password(Default is
Empty)> Network> IP Setting
⚫ Press IP Setting to login in to the menu
⚫ Select "Static" mode
⚫ Press "Enter" key
⚫ Set the IPMaskGWDNSweb porttelnet port
⚫ Press "Save" key to make it work
⚫ Tips "Network is changed, press OK reboot "
3.4 SIP Account Settings
ES680-PEG IP phone makes calls based on sip accounts, It can support Single account or Multi-account, Each account
can be configured to the different SIP server.
If you want to… Then...
Create an SIP account 1) Select “System setting” > “Advanced setting”;
2) Enter the password required(The default is empty) ;
3) Select “SIP” > “Account sip”;
4) Select one of the account you want to setting, you can configure the
following parameters
-Enable account*: Select Enable
-Line Keys Use: Default is 1
-Description: description of this account
-Display Name: The name displayed on the screen
-Authentication user: the Authenticated users are matched with the SIP
server.(The default With the same account)
-Account*: the account matches with the SIP server.(extension number)
14. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
-User pass word*: the user password matches with the SIP server
-SIP Server*: The primary SIP server, all calls through this server
-Out Bound Server: The out bound SIP server
-STUN Type: Enable/Disable STUN feature
-STUN: Input STUN URL
-Auto Answer: Enable/Disable this account auto answer feature
* Note: When you finish the setting, you can press Save to make it work, and
then you can see the status icon in the LCD idle. The
parameters with the * mark must be set.
Disable sip account 1) Select “System setting” > “Advanced setting”;
2) Enter the password required(The default is empty) ;
3) Select “SIP” > “Account sip”;
4) Select “Enable account” > “Disable”;
5) Select “Save” to saves settings
3.5 Basic Features.
3.5.1 Making a Call
Here are some easy ways to place a call on SayHi IP Phone:
If you want to... Then…
Place a call using
the handset
Pick up the handset 1) You can hear dial tone;
2) Enter a number;
3) Press # button (default),
-or wait 5s (default), then it send the number
automatically.
Place a call using a
speakerphone
Press Speaker button
Place a call using a
headset
Put on your headset, active
Headset button so that the
status light is Red, and then
do as using speakerphone
3.5.2 Anonymous Call
You can use anonymous call feature to block the identity and phone number from showing up to the called party when you
call someone. E.g, you want to call to consult some of the services, but you don't want to be harassed.
Enable Anonymous Call Press OK or MENU> Function Setting> Anonymous
Press Enter or OK button ,
-You can select which Account want to use, enable/disable this
feature and enable/disable reject anonymous
3.5.3 Redial
To redial the last placed call from your phone
15. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Redial Press REDIAL button to dial the last number
-or press Navigation button-Left > “Dialed number”, select a number,
and press
3.5.4 Call Log
Dial from a call log 1) Press MENU or OK button > “Call history”, you can select "All Calls",
“Missed calls”, “Received calls” and “Dialed numbers”,
- or press Navigation button (in Standby interface) > select "All
Calls"(up) “Missed calls”(down), “Received calls”(left) and “Dialed
numbers” (right)
2) Then press button.
NOTE: You also can press the "log" to login this menu when in the
idle.
3.5.5 Making Calls to Contact
You can also dial a contact from the Personal Phone Book.
Placing Calls to
Contacts
1) Press MENU or OK button > “Phone Book”, you can select "Personal
Phone Book", “Enterprise Phone Book”, “LDAP” and “Black List”,
- or press Navigation button (in Standby interface) > select the desired
contact.
2) Then press button.
NOTE: You also can press the "DIR" to login this menu when in the
idle.
3.5.6 Multi-lines to Answer the Call
Multi-lines to Answer the
Call
1) Another Line button is Red and flashing, Light strip is Red and flashing;
2) Press the flashing Line button to answer (at this time, the original call
will be hold.)
3.5.7 Auto-Answer
You can set the phone and let it auto-answer the coming call.
Auto-Answer the
Coming Call
1) Enable the Auto-Answer feature.
2) Auto-Answer mode you can set in the MENU>Function Setting> Auto
Answer >Device
⚫ Speaker
⚫ Handset
⚫ Headset
16. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
When you use the Handset mode, at this time you need to hands up the
handset and then it can work at this status.
3)Filter Groups
Auto-answer the coming call in this special groups.
3.5.8 Ending a Call
To end a call, hang up. Here are some more details.
Hang up while using the
Handset
Return the handset to its cradle,
-or press End
Hang up while using the
Speakerphone
Press Speaker button,
-or press Line button for the appropriate line,
-or press End
Hang up while using the
Headset
Press Handset button, (Do not keep the headset mode) ,
-or press End (keep the headset mode)
Hang up one call, but
preserve another call on the
other line
Press End,
-or refer to the above three methods
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at anytime, and the other lines would be hold. As a result of
that, you can switch different calling line on our phone.
If you want to... Then...
Put a call on hold Press HOLD button,
-or press soft key
Hold a line and switch to
another line
Press another Line button for the appropriate line
Resume a call on current
line
Press Line button,
Release a call on different
line
Select the line want to release hold, press the line, so recovery;
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the green and flashing Line button or Hold in the LCD.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Talk to the transfer
recipient before
transferring a call
(consult transfer)
1) Press TRANSFER button or press XFER;
2) Enter number;
3) press “#”(default) ,
-or press then transfer the call,
17. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
-or wait five seconds(default)then transfer the call
Transferred to idle lines
or other numbers
without talking to the
transfer recipient
(Blind transfer)
1) Press TRANSFER button or XFER;
2) Press ;
3) Enter number;
4) Press “#”(default)
-or press , then transfer the call;
-or wait five seconds(default)then transfer the call
Blind transfer to the
held line
1) Press TRANSFER button or press XFER;
2) Press the Line button of held line
3.5.11 Using Mute
With Mute enabled, you can hear other parties on a call but they cannot hear you. You can use mute in conjunction with the
handset, speakerphone, or a headset。
Toggle Mute on
Press C button, then the screen top and left will have a MUTE icon
Toggle Mute off Press C button again, then the button light off
3.5.12 Do Not Disturb
You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a busy tone(Can also be set to
their voice mail or other extension numbers, etc.).
Enable global DND 1) Press DND;
2) All enabled line on the phone would changes to status. and the
icon is .
Enable DND on a single
line
Press MENU or OK button > “Function setting” > “DND” > (select line)
“Enable”
Disable DND Global DND enabled, press to disable global DND;
Line DND enabled, press twice ,
-or press MENU or OK button > “Function setting” > “DND” >(select line)
“Disable”
3.5.13 3-way Conference
You can enable a three-party conference, during the conversation three phone parties can communicate with every party.
If you want to... Then...
Invite the transfer
recipient into a
conference in a
transferring
1) When the transfer recipient answer the call, press "CONF" soft key on
your phone;
2) Then the held one, transfer recipient and you will be into a conference,
and the LCD will display Conference :0:0:10 status.
Invite the third party into
a conference in a active
1) Press "CONF" soft key in an active call;
2) Enter the third party number;
18. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
call 3) After connected the third party, press "CONF" soft key again
establish a conference
with held line
1) when one phone line is holding on and the other line is busy;
2) Press "CONF" Soft key
3)Press the held line's programmable button, the 3-way Conference is
enable.
3.5.14 Voice Mail
When the Phone get a voice mail from server..
Voice Mail 1)Press the Voice Mail button
2)Enter the User Password
3)It will login into the voice mail server. You need to follow the IVR to do it.
3.5.15 MPL
MPL(Mobile Phone Line), dock your mobile phone as a line.
Step1: Enable/disable MPL, press Menu(OK) > System Settings > Advanced Settings(Default password is empty, press O
K button to enter) >MPL .
Step2: Change the SIP line account model as ”MPL”.Press the Menu(OK) > System Settings > Advanced Settings(Default
password is empty, press OK button to enter) > SIP > SIP Accounts, press OK button to submit the changes.
Step3: Turn on your mobile phone’s Bluetooth feature. Find the Bluetooth list, e.g. “016B0A-U6S” and make connection.
And then you can use MPL line to make a call or conference or transfer.
MPL Application Examples
19. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
3.6 Advanced Settings
3.6.1 Using the phone book
Enterprise Phone Book
Search the Contacts
from Enterprise
Phone Book
1) Press DIR in the idle status,
-or press "MENU" or "OK" button > “Phone book”>“Enterprise Phone
Book”,
20. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
2) Select “Enterprise Phone Book”, press "OK" button;
3) Press "Find" and input the name who you want to search.
Call the Contact from
Enterprise Phone
Book
1) Press "DIR" in the idle,
-or press "MENU" or "OK" button > “Phone book”>“Enterprise Phone
Book”,
2) Select “Enterprise Phone Book”, press "OK" button;
3) Press "Find" and input the name who you want to search.
4) When you search the person, you can dial it.
Personal Phone Book
Add Contacts 1) Press Phone Book,
-or press "MENU" button > “Phone book”>“Personal phone book>View
All”,
-or press "OK" button > “Phone book”>“Personal phone book>View All”;
2) Select “Add contact”, press "OK" button;
3) Use the navigation keys to select content, press "OK" button to set and
modify:
-Name: set the name of contact,
-Office Number: Setting the contact Office Number
-Mobile Phone Number: Setting the contact Mobile Phone Number
-Others Number: Setting the contact Others Number
-SIP Account: Setting the contact call SIP account
-Group: the contacts be divided into different user’s groups
4) Press "Save" soft key to complete
Add group 1) Press "DIR" soft key,
-or press "MENU" button > “Phone book”>“Personal phone book>View
All”,
-or press "OK" button > “Phone book”>“Personal phone book>View All”;
2) Select the “add group” then press OK button;
3) Use the navigation keys to select content, press OK button to set and
modify:
-Group name: name of the group
4) Press "Save "soft key to complete
Modify group 1) Press "DIR" soft key,
-or press "MENU" button > “Phone book”>“Personal phone book>View
All”,
-or press "OK" button > “Phone book”>“Personal phone book>View All”;
2) Select the “Modify group” then press "OK" button ;
3) Select the group you want to modify, press the "OK" button to set and
modify, press "Save" to save the change
Delete group 1) Press "DIR" soft key,
-or press "MENU" button > “Phone book”>“Personal phone book>View
21. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
All”,
-or press "OK" button > “Phone book”>“Personal phone book>View All”;
2) Select the “Delete group” or OK button;
3) Select a group you want to delete, press OK button
LDAP
Search the Contacts
from LDAP
1) Press "DIR" in the idle,
-or press "MENU" or OK "button" > “Phone book”>“LDAP”,
2) Select “LDAP”, press "OK" button;
3) Press "Find" and input the name or number who you want to find search
from the LDAP server.
Call the Contact from
LDAP
1) Press "DIR" in the idle,
-or press "MENU" or "OK" button > “Phone book”>“LDAP”,
2) Select “LDAP”, press "OK" button;
3) Press "Find" and input the name or number who you want to find from the
LDAP server.
4) When you search the person, you can dial it.
Black List
Add the Contacts 1) Press "DIR" in the idle,
-or press "MENU" or "OK" button > “Phone book”>“Black List”,
2) Select “Black List”, press "OK" button;
3) Press "Add" and input the nameoffice numbermobile numberother
numberSIP account who what you want to add into the Black List.
View the Contact from
Black List
1) Press "DIR" in the idle,
-or press "MENU" or "OK" button > “Phone book”>“Black List”,
2) Select “Black List”, press "OK" button;
3) Press "RUN" to view someone who what you want to find.
4)If you want to move or change it, you can follow the RUN to do.
3.6.2 Using Call Logs
Your phone maintains records of your missed, placed, and received calls.
View call logs 1) Press "MENU" or "LOG" button > “All Call” > “Missed Calls”, “Received
Calls”, or “Dialed numbers”
2) Use the navigation keys to view the call record information.
Delete/Save Call
Logs
1) Login in to the Call Logs
2) Use the navigation keys to view the call record or select DEL key.
3) Use the navigation keys to view the call record or select Save key.
22. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
3.6.3 Peer-to-Peer
When all of the phone accounts were disable or not register. it will be show this mode in the idle. It can use by when the new
workstation isn't have SIP server.
Peer-to-Peer Disable all of accounts or not register.
Make Call with
Peer-to-Peer
1)Press OK or MENU button> System Setting> Advanced Setting> SIP
Account;
2)Disable all of accounts or un-register;
3)Turn back the phone idle, you can call someone use IP address.
3.7 Keypad Setting
SayHi series IP Phone can through two ways configuration it, one is setting in MENU, another is setting in website. Here
just description in MENU.
NOTES: When you want to input the IP address like ".", it was replaced by the "*".
3.7.1 Language Setting
ES680-PEG IP Phone support Multi-Language setting, as below is an example.
Switch the Language
between Chinese and
English
1)Press OK or MENU button> System Setting> Phone Setting> Language
2)Here you can select
EnglishFrenchItalianPolishProtugueseRunssianSpanishTurkishCh
inese
3) After you finish select, press Save to make it work.
3.7.2 Message
ES680-PEG have Message feature. It will display in the LCD when it has a New Message.
Create a Message 1)Press OK or MENU button;
2)Select "Messaging"
3)Voice Message: Setting the Voice Message code in here.
Text Message: Write down the Text Message in here.
4)Select Text Message> New Message.
5)Input the receiver and write down message body, and then press send to
finish.
Message Inbox 1)Select Message Inbox.
2)Select which one you want to check.
3)You can press Enter to read or press Del to delete.
3.7.3 Time & Date
SNTP 1)Press OK or MENU button;
2)Press OK or MENU button> System Setting> Phone Setting> Time & Date> Time
and Date setting> SNTP
23. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
3)SNTP
-Time Zone:Setting the time zone
-NTP Server 1:NTP server address 1
-NTP Server 2:NTP server address 2
-DayLight:Enable/Disable Day Light
SIP Server 1)Press OK or MENU button;
2)Press OK or MENU button> System Setting> Phone Setting> Time & Date> Time
and Date setting>SIP Server
3)Press Save to make it work
Manual Setting Press OK or MENU button;
2)Press OK or MENU button> System Setting> Phone Setting> Time & Date> Time
and Date setting> Manual Setting
3)Manual Setting
- Manual Setting: YearMonthDaysHoursMinutesSeconds
Time Display
Format
1)Press OK or MENU button;
2)Press OK or MENU button> System Setting> Phone Setting> Time & Date> Time
Display Format
3)Time Mode: 24hour12hour
Date mode:
DDMMWWWMMDDWWWWWWDDMMMDDMMMYYYYYYMMDDDDMMYYY
YMMDDYYDDMMMYYYYWWWDDMMM etc.
3.7.4 Ring Tone and Volume Setting
Ring Type 1)Press OK or MENU button;
2)Press OK or MENU button> System Setting> Phone Setting>Ring Type
3)Select the ring type from 1 to 8 or custom ring, and then press Save to make it
work.
Volume Setting 1)Press OK or MENU button;
2)Press OK or MENU button> System Setting> Phone Setting> Volume Setting
3)Volume Setting: HandsetSpeakerHeadsetRing volume
4) Press Enter to adjust the volume and press Save to make it work
NOTES: For the Custom Ring Type you need to upload it from website.
3.7.5 Searching Phone Book
Accurate Search 1)Press MENU or OK button > “Function Setting”, you can select " Accurate
Search "
2) Then press Enable/Disable and Save.
3) When you back to idle, you can use the digital keypad to search the contact.
T9 Search 1) Press MENU or OK button > “Function Setting”, you can select " T9 search"
2) Then press Enable/Disable and Save.
3) When you back to idle, you can use the digital keypad to search the contact.
NOTES: The Search Phone Book setting default is Accurate Search.
24. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
3.7.6 Cannot Set the Features with Keypad
As below features are cannot setting with the keypad:
1) Dial Plan.
2) Custom Ring Type
3) SNTP Server and Time & Date
4) Update the Firmware or Backup.
4. WEB User Interface
In addition to the phone user interface, you can also customize your phone via web user interface. In order to access the
web user interface, you need to know the IP address of your new phone. To obtain the IP address, press the C key on the
phone. Enter the IP address (e.g. HTTP://192.168.0.10 or 192.168.0.10) in the address bar of web browser on your PC.
The default user name is admin (case-sensitive) and the password is admin (case-sensitive).
Main Interface-Phone Status
Here you can see as below information: System Run Time, Register Status, Network Status, System Information,
25. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
ITEM DESCRIPTION
System Run Time The phone system normal running time.
Register Status The status with Account 1~8.
Network Status The status with LAN, MAC, LAN IP, Net mask, Gateway, Primary DNS,
Secondary DNS, VPN IP, PC IP, PC Net mask, Device Type, DHCP Server.
System Information The status with Phone Model, Software Version, Hardware Version,
Hardware ID, Kernel Version, Auto-Provision Server URL, TFTP Server IP.
4.1 Network
4.1.1 Wi-Fi Setting
26. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
4.1.2 LAN Port
ITEM DESCRIPTION
Network Connection Mode Network Connection Mode has DHCP, Static IP, PPPoE
DNS Settings Select the DNS mode that you want.
4.1.3 PC Port
AS Bridge
Normally, you should choose “bridge” feature, it means that pc port and LAN port will share the same network.
AS Router
Router feature is for the phone PC Port. You must input IP address (it’s equivalent to a gateway) and Net mask.If you want
27. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
to use DHCP function, please turn it on, input start IP and end IP.
4.1.4 Advanced
VPN Setting
When using VPN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VPN You can enable/disable VPN for phone and pc.
VPN Type: Choose the appropriate type of VPN.
VPN Server Addr VPN server's IP.
VPN User Name VPN user's name
VPN Password A password be used for authentication
OPEN VPN Upload the *.ovpn file to the phone
Upload VPN cfg Select the VPN configuration to upload
28. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
VLAN Setting
When using VLAN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VLAN You can enable/disable VLAN for phone and PC
VID
[LAN/PC Port]
The VLAN ID you want the phone or PC to join
Port Management Settings
Port Management Settings
HTTP Port The default web port is 80,if you want to change it(for example change it to88),
You must input IP and Web port to login the web page(for example
HTTP://192.168.0.200:88). It will take effect on next reboot.
Telnet Port The default Telnet port is 23,if you want to change it(for example change it to
2003). You must input IP and Telnet port to login the manage page (for example
telnet 192.168.0.200:2003).It will take effect on next reboot.
Local SIP Port You can change the local SIP port to another, The default local SIP port is 5060.
29. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
RTP Port Range You can change the RTP port range to another, The default RTP port range is
10000 to 10128.
QoS
ITEM DECSRIPTION
SIP QoS The range is 0~63,default is 26
Voice QoS The range is 0~63,default is 46
Network Packet Mirroring
Network Packet Mirroring When select on, then you can capture the phone’s packet use notebook which
connect to pc port of the phone
802.1x Settings
ITEM DECSRIPTION
802.1x Mode You can setting the 802.1x mode to EAP-MD5 or PEAP-MSCHAPv2. Default is
disable.
802.1.x Identity You can setting the 802.1.x Identity here.
MD5 Password You can setting the MD5 Password here.
CA Certificates You can upload the CA Certificates here.
30. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
LLDP
ITEM DECSRIPTION
LLDP Enable/Disable the LLDP feature.
LLDP Packet Interval You can setting the LLDP packet Interval here. Default is 60s.
Paging Setting
Paging Setting(NOTE: This feature priority is followed the serial number, In other words, "paging
1" is the highest priority)
Paging1 Enable/Disable Paging feature.
Group IP and Port Group IP and Port with Paging.
31. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
5 SIP Account
5.1Basic
Choose one Account, you will find the following parameters:
ITEM DECSRIPTION
Account Select the Account Number what you want to set.
Enable You can choose on/off to enable/disable the line.
Account Mode You can choose VOIP/MPL. If you want to use MPL feature, Pls following the
MPL setting to operating or contact your system administrator for help.
Number Of Lines The line key of account used, default is 1.
Display Name It is showed as Caller ID when making a phone call
Username It is a username provided by SIP Server
32. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Authenticate Name It is authenticated ID for authentication
Password It is a password provided by SIP Server
Label Label with this account.
SIP Server Server for registration, provided by administrator. IP PBX of your company.
Secondary server When the main server can't work, it also can register in this secondary server.
Outbound Proxy Server Put into the address with the outbound proxy server.
Secondary Outbound
Proxy Server
When the main out bound server can't work, it also can use this secondary
server.
Poling Interval Time Of
Registration
Poling Interval Time Of Registration, default is 32 s.
NAT Traversal Defines the STUN server will be active or not
STUN Server Session traversal utilities for NAT.
Register Expiration Time IP phone automatically registered every time
SIP Transport There are UDP/TCP/TLS three options
Ring Type Select this account ringing type.
34. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
ITEM DECSRIPTION
Advanced
Account Select the Advanced Setting account.
RPort A parameter used for through registration.
Message Setting the Voice Message feature code number
Do Not Disturb Enable/Disable Do Not Disturb
Anonymous Call Enable/Disable anonymous call.
Anonymous Call
Rejection
Enable/Disable anonymous call rejection.
Use Session Timer Enable/Disable refresh session function. The device will send an Invite packet to
refresh the session during a call if it enable.
Session Timer The refresh session time interval.
Refresher Defines which side refreshes the session. UAC: To refresh the session from the
client side. UAS: To refresh the session from the server side.
Call Method This method include SIP and TEL.
DNS-SRV Enable/Disable DNS-SRV.
Allow-events Enable/Disable Allow-events.
Registered NAT Enable/Disable Registered to NAT
Keep-alive Type Default is UDP, or you can change to Options or Notify or disable it.
Keep-alive Interval Default is 30 second.
User user=phone There will be a sign user=phone in the invite packet of the SIP message.
Conference Way Default is conference on phone. You can change on server.
Network-based
conference URI
Setting the Network-based conference URI
BLA Bridge Line Appearance, extensions share one line
BLA Number Setting the BLA Number
Subscribe Period Subscribe expiration time. Default is 1800.
SIP Encryption Enable/Disable SIP encryption.
Encryption Algorithm The encryption algorithm at this time we only have RC4.
Encryption Key The key with encryption.
Voice Encryption(SRTP) Enable or disable voice encryption(SRTP).
EP+ Outcode Switch Enable or disable EP+ Outcode feature
OutCode Setting the EP+ Outcode
OutCode Length Setting the EP+ Outcode Length
35. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
6 DSS Keys
6.1 Paperless Program keys
ITEM DECSRIPTION
Paperless Program Keys Enable/Disable the paperless program keys feature.
Key1~72 The key amount depend on the lines, and support 4 page. 72=4*18;
Mode Support Speed Dial,Speed Dial Prefix, DTMF, BLF, Paging, Call Park, Intercom,
Pickup, XML Browser, Broadsoft BLF, BLA.
Account Select account to make it work
Name The name of the key
Number The number of the key
36. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
6.2 Line Keys
ES680-PEG have 8 line keys:
ITEMS DESCRIBES
Line The default value.
Speed Dial You can use this key feature to speed up dialing the numbers often used or hard to
remember.
Speed Dial Prefix You can use this key feature to speed up dial a call with a specified prefix number.
DTMF You can use this key feature to send the specification of arbitrary key sequences via
DTMF.
BLF You can use the BLF feature to monitor a specific user for status changes on the
phone.
Paging You can use multicast paging to quickly and easily forward time sensitive
announcements out to people within the multicast group.
Call Park You can use call park feature to place a call on hold, and then retrieve the call from
another phone in the system (for example, a phone in another office or conference
room).
Intercom You can press the configured intercom key to automatically connect with a remote
extension for outgoing intercom calls, and the remote extension will automatically
answer the incoming intercom calls
BLA This feature such as the BLF.
NOTE: ONLY WHEN YOU CHOOSE “SPEED DIAL”, THE RIGHT OF “NAME”,”NUMBER” WILL TAKE EFFECT.
6.3 Function Keys
Function Keys: If you do not like the default setting with the function keys feature. You can change to whatever you like.
NOTE: IF THE PHONE WITHOUT THE KEY, YOU CAN IGNORE IT.
37. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
6.4 Soft Key
Soft Keys: Soft key is the key with below display in the LCD. You can change it for your mind to the other features in many
all kinds of status. As below example, when you dialing with someone, the LCD display soft key is Send Del EmptyEnd,
Empty means nothing in it.
38. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
7 Settings
7.1 Basic
ITEM DECSRIPTION
Language Select the WEB UI language looks like English, French etc.
Backlight The LCD backlight, default is 60s.
Ring type The incoming call’s ring, default has ring1~8.
Upload ring tone Please upload a ring tone with G.711A(*.wav) audio coding, maximum is 10 rings
and the total size must be less than 150KB.
40. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
ITEM DECSRIPTION
Auto Answer Enable or disable auto answer feature, or you can turn on for group.
Auto Answer Mode Select the auto answer mode
Call Waiting This call feature allows your phone to accept other incoming calls during the
conversation.
Call Waiting Tone Set tone for prompting a new call during a call.
Auto Redial Enable or disable auto redial feature
Auto Redial Interval
(1~300s)
Setting the auto redial interval
Auto Redial Times
(1~300)
Setting the auto redial times
41. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Hot Line Function Enable or disable hot line feature
Pickup Function Enable or disable pickup feature
Pickup Code Setting the pickup code
Play Hold Tone Set tone for prompting hold on a call
DTMF The mode of sending DTMF by pressing the number keys during a call
Suppress DTMF Display Suppress DTMF display in taking
100 Reliable
Retransmission
Enable or disable PRACK transmission
Fuzzy Search Search phone book when dial number, and show match
Phonebook search Choose phone book search type
Save Call List Enable or disable save call list
BLF Transfer Connected
call
Enable or disable BLF transfer connected call
BLF Transfer mode Setting the BLF transfer mode to blind or attended
Status Light Setting the status light to Show altering calls and casing LED or Only show
altering calls or disable
Booking Voice mail Enable or disable Booking Voice mail
Play Voice mail tone Enable or disable Play Voice mail tone
Display missed Calls Enable or disable Display missed Calls
DND Soft key Enable or disable DND Soft key
Play Hangup Tone Enable or disable Play Hangup Tone
Transfer Code Enable or disable Transfer Code or number
Conference Code Enable or disable Conference Code or number
Hold Code Enable or disable Hold Code or number
Conference exit result Setting disconnect all or others remain connected
Return code when
refused
Set return message for call rejection.
Return code when DnD Set return message for Do Not Disturb.
Hook Setting the hook mode
Flash hook time
(<800ms)
Setting the Flash hook time
Called No Answer Times Setting the Called No Answer Times (Min:20, Max:1800)
Caller No AnswerTimes Setting the Caller No AnswerTimes (Min:90, Max:1800)
Pound Send Method Setting the Pound Send Method # or %23
RFC 2833 PayLoad Setting the RFC 2833 PayLoad
Caller ID source Setting the Caller ID source to FROM or PAI
42. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
SIP Session
Timer(seconds) T1
Timer,a timer H=64*T1 seconds set for all transfers at the completed state. It
defines when server transaction stops resending responses.
SIP Session
Timer(seconds) T2
T2 use with T1.
SIP Session
Timer(seconds) T4
T4 represents the possible information transmission time between the client and
server side transaction on the network. The default value of T4 is 5 seconds.
Affiliated Port Enable or disable register Affiliated port
Headset Mode Headset Mode default is Normal, or you can select Seat Mode
Ring type in Seat Mode Ring type in Seat Mode default is Headset, or you can select Speaker
BLF Light Enable or disable BLF light
7.3 Time Settings
ITEM DECSRIPTION
43. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Time Settings
Set Time Mode Include SNTP/SIP Server/PSTN/Manual
SNTP Server You can select in the list or input owner server address.
Update Interval The update interval with SNTP.
Day Light Saving Time Enable/disable the DST for the phone
Time Format You can use 24 hour time format or 12 hour time format
Date Format You can choose the appropriate time format.
Time Zone-GMT You can select different time zone for the phone
Manual Setting Setting time manually.
7.4 Keyboard Lock
Keyboard Lock Enable/Disable keyboard lock, you can lock: MENU Key, FUNCTION Key., ALL
Keys, LOCK all keys but auto Answer.
7.5 VoIP Call Forwarding
ITEM DECSRIPTION
Always All ways transfer the call to others.
If Busy If the phone was busy working, the call will be transfer to others.
If No Answer If the phone was no answer, the call will be transfer to others.
Ring Frequency The ring frequency with the VOIP Call Forward.
7.6 Remote Control
44. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
List IP address of PC, who can remote control this device.
7.7 Action URL
It allows IP phone to interact with web server applications by sending an HTTP or HTTPS get request. You can specify a
URL that triggers a get request when a specified event occurs. Action URL can only be triggered by the pre-defined
events(e.g. Incoming Call). The valid URL format is: http(s)://IP address of the server/help.xml?.
7.8 EP+
EP+ options are for the users who download the EP+ application on mobile phone.
After Completing below settings, EP+ will be activated. For more details, please refer to
http://escene.cn/productshow.php?cid=322&id=59&parentcateid=322
You can download the Android/IOS EP+ APP by scanning the QR code below. After EP+ APP installed, you can follow the
first installation guide to operate:
A) Mobile phone need to be connected to LAN by using WIFI.
B) Using EP+ APP to scan/mannually input the IP Phone MAC code.
C)Find the EP+ APP password form IP Phone's LCD menu or WEB. LCD: Press C > View Status > EP+ Password. WEB:
Login WEB > Phone Setting > EP+. And then input the password into the EP+ APP.
D) Press Login button.
Note: EP+ setting mode default is automatic. For more information, refer to EP+ user manual.
45. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
7.9 Audio
ITEM DECSRIPTION
Select Country Select the country dial tone. Default is United States.
Ring Volume The ring volume default is Lv3, the range is 0~9.
Handset Volume The handset volume default is Lv5, the range is 1~9.
Speaker Phone Volume The speaker volume default is Lv5, the range is 1~9.
Headset Volume The headset volume default is Lv3, the range is 1~9.
Handset MIC Volume The handset MIC volume default is Lv3, the range is 1~7.
Speaker Phone MIC
Volume
The speaker MIC volume default is Lv3, the range is 1~7
Headset MIC Volume The headset MIC volume default is Lv3, the range is 1~7
Audio Codec Use the navigation keys to highlight the desired one in the Enabled/Disable
Codes list, and press the / to move to the other list.
46. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Jitter Buffer
Min Delay The min delay range setting , default is 60.
Max Delay The max delay range setting , default is 150.
Play Load Length The play load length setting, default is 30ms.
High Rate Of G723.1 Enable/Disable High Rate of G723.1 feature.
VAD Enable/Disable VAD feature.
Echo Suppression Mode Enable/Disable Echo Suppression Mode feature.
Side Tone Enable/Disable Side Tone feature.
7.10 Ring
Internal ringer text:
This Internal ringer text enables the server to distinguish between internal and external rings. The trace head-info must
include "Alert-Info: ;info=".
Internal ringer file:
According to the defined Internal ring text, play the corresponding Internal Ring File.
48. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
ITEM DECSRIPTION
Send Key Select the default send key mode you want to use.
Dial Length Enable this feature will limit the dial length. Default is 25.
No Dial Timeout Setting the range with no dial timeout, default is 5.
Dial Rule Select the Add Rule button to add dial rule, pls see as below detail.
ITEM DECSRIPTION
ID Dial Plan ID
IP The ip of a phone which you want to call
Description Description with this dial rule.
Port Setting the Port with this dial rule, default is 5060.
Prefix The number which you need to press actually if you want to call the phone
Called Insert Number There have two option, Enable or Disable.
Position Which position you want insert the number
Number Which number you want to insert
Called Delete Number There have two option, Enable or Disable.
NOTES: If you want to know more detail about Dial Rule, pls find it in the official website to download the specific
document. HTTP://www.escene.cn/en
7.11 BLF Setting
Create the BLF groups and members of group.
50. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
7.12 TR069
7.13 MPL
MPL: mobile phone line
ITEM DECSRIPTION
MPL Enable or disable MPL feature
MPL Name The name of MPL, you can rename it. Default is 001122-U6S
Pin Code Connected to MPL, you need to input the pin code,Default is “1234”.
Mac This is the MPL’s bluetooth mac, e.g 00268B001122
State Show the status with MPL
8 Phone Book
The phone book including Group, Contact, LDAP and Ban list, please review the following for more details:
51. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
8.1 Contact
You can add, edit and delete contact in a phone book on this web page .
The phonebook can storage 300 contacts entry
If you want to add a Contact, you just ought to click ‘Add Contact’ .
You can edit an existed Contact by click .
You can delete an existed Contact by click , if you want to delete all Contacts, you just ought to click ’Delete All
Contact’.
You can edit or move this contact to Ban List after you select .
You can download and save this contact to PC after you select .
8.2 Group
You can add, edit and delete group in a phone book on this web page.
52. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
If you want to add a Group, you just ought to click ‘Add Group’ .
You can edit an existed Group by click .
You can delete an existed Group by click , if you want to delete all Groups, you just ought to click ’Delete All Group’.
8.3 LDAP
NOTES: If you want to know more detail about LDAP, pls find it in the office website to download the specific
document. HTTP://www.escene.cn/en. As below figure is an example.
e.g.
LDAP Name Filter:(sn=%s)
LDAP Number Filter:(telephoneNumber=%s)
Server Address:192.168.0.65
BASE:DC=ldap,DC=escene,DC=com
User Name:bb@ldap.escene.com
Pass Word:escene_2012
LDAP Name Attributes 1:sn
LDAP Name Attributes 2:cn
LDAP Number Attributes 1:telephoneNumber
54. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
If you want to add a Ban List, you just ought to click ‘Add Ban List’.
You can edit an existed Ban List by click .
You can delete an existed Ban List by click , if you want to delete all Ban List, you just ought to click ’Delete All Ban
List’.
You can edit or move this contact to Contact after you select .
8.5 Phone Call Info
You can remote or local control the IP phone to make a call by WEB.
9 Maintenance
NOTES: Don't cut off the electricity or network cable when doing upgrade in the below ways!
55. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
9.1 HTTP Upgrade
You can upgrade the software, kernel and configuration etc. files by HTTP.
When using HTTP upgrade, you can set several parameters as follow:
HTTP Upgrade
Select a File Browse the software/kernel/configuration file which you need to upgrade from
HTTP
Software Upgrade Used for upgrading the software of the phone
Kernel Upgrade Used for upgrading the kernel of the phone
Configuration You can used upload/download to upload/download the configure file of the
phone
XML Phone Book Used for uploading/downloading the XML phonebook of the phone
Vcard Downloading all contacts in the Vcard mode, but upload only support one by
one.
EXT Module Used for updating/backup the expansion of the phone
[NOTES:The mode doesn't support this feature]
Log Used for the administrator to find out or making sure the problem with this
equipment.
All Config File All Config File includes: Configuration, Extern, Log, XML Phone book, Enterprise
Phone Book.
9.2 FTP Upgrade
You can upgrade the software, kernel and configure files by FTP.
56. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
When using FTP upgrade, you can set several parameters as follow:
FTP Upgrade
Server IP The IP address of the FTP server
Filename Downloading from FTP server
Username Providing by FTP server
Password Providing by FTP server
Software Upgrade Used for upgrading the software of the phone
Kernel Upgrade Used for upgrading the kernel of the phone
Configuration Used for updating/backup to update/backup the configure file of the phone
Phone Book Used for updating/backup to update/backup the phonebook of the phone
EXT Module Used for updating/backup the expansion of the phone
[NOTES:The mode doesn't support this feature]
NOTES: It's not necessary to input filename when doing backup Configuration, Phone Book, EXT Module.
9.3 TFTP Upgrade
You can upgrade the software, kernel and configure files by TFTP.
When use TFTP upgrade, you can set several parameters as follow:
TFTP Upgrade
Server IP The IP address of the TFTP server
57. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Filename Downloading from FTP server
Software Upgrade Used for upgrading the software of the phone
Kernel Upgrade Used for upgrading the kernel of the phone
Configuration Used for updating/backup the configure file of the phone
Phone Book Used for updating/backup the phonebook of the phone
EXT Module Used for updating/backup the expansion of the phone
[NOTES:The mode doesn't support this feature]
NOTES: It's not necessary to input filename when doing backup Configuration, Phone Book, EXT Module.
9.4 Auto Provisioning
When you open this auto provision feature, the phone will do auto provision after it detect a different software or kernel
(Higher or Lower) which are putted on the TFTP,HTTP,HTTPS,FTP, server. For the detailed information about auto
provision, you can find it in the official website: HTTP://www.escene.cn/en
58. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
When using auto provision, you can set several parameters as follow:
Auto Provision
PNP active The request to the server is to obtain a support URL for upgrade.
PNP Interval(minutes) Setting the PNP interval.
Auto Provision You can enable/disable auto provision by select on/off
Protocol Used for auto provision, it includes TFTP/HTTP/FTP
Software Server URL The server address of the auto provision
Username Providing by provision server
Password Providing by provision server
Auto Download Software Used for auto download software from server
59. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
Auto Download Kernel Used for auto download kernel from server
Auto Download Config File Used for auto download config file from server
Auto Download Expansion NOTES: The model doesn't support this feature.
Auto Download Enterprise
Phonebook
Used for auto download Enterprise Phonebook from server
Auto Download Personal
Phonebook
Used for auto download personal phonebook from server
Booting Checked Used for checking the auto provision when phone booting
Zero Active Enable or disable zero-sp-touch which is used to download
configuration on the server during the phone power on.
Wait Time(1~100s) The time when configuration interface of zero-sp-touch will show up
when power on.
Disable the phone while
booting checking
Enable/Disable the booting checking feature.
Auto Provision Frequency Used for setting the time interval for auto provision
Auto Provision Time Used for the specific time for auto provision
Auto Provision Next Time Reset the Auto Provision Next Upgrading time.
AES Enable You can enable/disable AES encrypt for auto provision
AES Key The key of the AES
Download file name Setting the download file name for Upper case or Lower case
Auto Provision Now Used for doing auto provision immediately
9.5 Log
This feature is use for the administrator to managing the equipment, like debugging, SIP etc,. If you need to catch a
debugging Level, you need to setup on this interface.
60. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
9.5 Local Log
Check the log file on the local.
9.6 Default Settings
You can load the phone to the factory default setting in default setting option.
Press the ‘Reset to Factory Setting’ option, the phone will load to factory default setting on next reboot.
9.7 Reboot
You can use reboot option to reboot the phone.
10 Security
10.1 Password
Here you can setting the administrator or user WEB password management. Select your type. If you login as an
administrator, you can modify both the user's and admin's passwords.
61. www.escene.cn/en
ESCENE Communication Limited.
ESCENE Office IP Phone
10.2 Trusted Certificates
10.3 IP Strategy
You can use IP Strategy feature to make a list which can be set to only allow the incoming call on the list.
e.g. As following picture you can see it has 192.168.0.248 in the list. When you open this feature. It means you just allow
come from this IP address meeting
11 WEB Other Settings or Information - Appendix
11.1 Logout
Logout the IP Phone web management.
11.2 Note Tips
In the right middle of the website page, there is a Note tips in every function page. Hope it can help you to know something
about that.