Caporex Oy ja Benjamin Biomedical ovat tehneet yhteistyösopimuksen joka käsittää pahakokäsikappaleiden, endoskooppien, kameroiden, skalpereiden korjauksen.
This document provides an introduction to endoscopic video camera repairs performed by Surge Canada Medical. It discusses the components and setup of endoscopic video cameras. Surge Canada Medical can repair over 75% of camera models, focusing on the most popular models. Common issues include cable damage, video problems, and fluid intrusion. Repairs are categorized from minor to extensive depending on the components replaced. The document highlights specific issues for some manufacturer's camera lines and provides repair statistics.
This document provides a list of over 150 medical device cable and cord models that Surge Canada has repair capabilities for. The cable and cord models listed cover a wide range of medical equipment categories including cables for electrosurgical units, endoscopy equipment, ultrasound probes, monitors, pumps and more. Surge Canada offers free estimates, a minimum 90 day warranty on repairs, and loaner equipment availability for repairs.
Flight x vision powerpoint presentationFLIGHT DENTAL
The Flight X-Vision Portable Handheld Dental X-Ray uses a state of the art X-Ray Generator made by Canon in Japan, that is compact and ultra safe. This allows the X-Vision to be a powerful unit but remain lightweight and portable. The ergonomic design allows the x-ray to be comfortably held in your hands and with one of the most intuitive and easy to use interfaces it makes doing a full mouth series easier and more efficient. In addition, the X-Vision features one of the longest lasting batteries on the market for handheld dental x-rays with a high quality Panasonic Lithium Ion Battery that is able to produce up to 800+ exposures in one charge. The X-Vision is safe, effective, lightweight and will make traditional wall mounted intraoral x-rays obsolete in the coming years.
This document summarizes the specifications and SPICE model for a Shindengen S3L60 general purpose rectifier diode. It includes:
1) The diode's component details, manufacturer part number, and SPICE model parameters.
2) Simulation results showing the diode's forward and reverse characteristics, including I-V curves and junction capacitance.
3) Comparison of the simulated and measured forward voltage, capacitance, and reverse recovery time.
This document provides product information and specifications for a Commscope-Andrew LDF12-50 low density foam coaxial cable. It includes details on ordering, payment, shipping, warranty and additional services available from the seller Launch 3 Telecom. The specifications section provides technical details on the cable's construction, electrical properties, environmental tolerances and regulatory compliance.
This document provides product information and purchasing details for a Commscope-Andrew FJ-2SM-015-35M ruggedized, bend insensitive singlemode fiber distribution cable that is 35 meters in length. It describes the fiber type, jacket color, dimensions, temperature operating range, connector types, minimum bend radius, and regulatory compliance. Contact and payment information is provided to purchase the cable along with details on shipping, warranty, repair and additional services offered by Launch 3 Telecom.
This document provides product details and purchasing information for a Commscope-Andrew FJ-2SM-015-10M ruggedized, bend insensitive singlemode fiber distribution cable that is 10 meters in length. It describes the fiber type, jacket color, dimensions, temperature operating range, connector types, minimum bend radius, and regulatory compliance. Contact and payment information is provided for purchasing the cable from Launch 3 Telecom along with details about shipping, warranty, repair and additional services offered.
This document provides guidance on choosing CCTV systems. It discusses different types of cameras such as bullet cameras, their resolutions and suitability for indoor vs outdoor use. It also covers lighting levels needed for cameras to function properly and types of recording devices from VCRs to DVRs. Multiplexers allow simultaneous recording from multiple cameras on one tape but not in real time like a switcher. Factors to consider when choosing a DVR include number of channels, resolution, frame rates, and display options.
This document provides an introduction to endoscopic video camera repairs performed by Surge Canada Medical. It discusses the components and setup of endoscopic video cameras. Surge Canada Medical can repair over 75% of camera models, focusing on the most popular models. Common issues include cable damage, video problems, and fluid intrusion. Repairs are categorized from minor to extensive depending on the components replaced. The document highlights specific issues for some manufacturer's camera lines and provides repair statistics.
This document provides a list of over 150 medical device cable and cord models that Surge Canada has repair capabilities for. The cable and cord models listed cover a wide range of medical equipment categories including cables for electrosurgical units, endoscopy equipment, ultrasound probes, monitors, pumps and more. Surge Canada offers free estimates, a minimum 90 day warranty on repairs, and loaner equipment availability for repairs.
Flight x vision powerpoint presentationFLIGHT DENTAL
The Flight X-Vision Portable Handheld Dental X-Ray uses a state of the art X-Ray Generator made by Canon in Japan, that is compact and ultra safe. This allows the X-Vision to be a powerful unit but remain lightweight and portable. The ergonomic design allows the x-ray to be comfortably held in your hands and with one of the most intuitive and easy to use interfaces it makes doing a full mouth series easier and more efficient. In addition, the X-Vision features one of the longest lasting batteries on the market for handheld dental x-rays with a high quality Panasonic Lithium Ion Battery that is able to produce up to 800+ exposures in one charge. The X-Vision is safe, effective, lightweight and will make traditional wall mounted intraoral x-rays obsolete in the coming years.
This document summarizes the specifications and SPICE model for a Shindengen S3L60 general purpose rectifier diode. It includes:
1) The diode's component details, manufacturer part number, and SPICE model parameters.
2) Simulation results showing the diode's forward and reverse characteristics, including I-V curves and junction capacitance.
3) Comparison of the simulated and measured forward voltage, capacitance, and reverse recovery time.
This document provides product information and specifications for a Commscope-Andrew LDF12-50 low density foam coaxial cable. It includes details on ordering, payment, shipping, warranty and additional services available from the seller Launch 3 Telecom. The specifications section provides technical details on the cable's construction, electrical properties, environmental tolerances and regulatory compliance.
This document provides product information and purchasing details for a Commscope-Andrew FJ-2SM-015-35M ruggedized, bend insensitive singlemode fiber distribution cable that is 35 meters in length. It describes the fiber type, jacket color, dimensions, temperature operating range, connector types, minimum bend radius, and regulatory compliance. Contact and payment information is provided to purchase the cable along with details on shipping, warranty, repair and additional services offered by Launch 3 Telecom.
This document provides product details and purchasing information for a Commscope-Andrew FJ-2SM-015-10M ruggedized, bend insensitive singlemode fiber distribution cable that is 10 meters in length. It describes the fiber type, jacket color, dimensions, temperature operating range, connector types, minimum bend radius, and regulatory compliance. Contact and payment information is provided for purchasing the cable from Launch 3 Telecom along with details about shipping, warranty, repair and additional services offered.
This document provides guidance on choosing CCTV systems. It discusses different types of cameras such as bullet cameras, their resolutions and suitability for indoor vs outdoor use. It also covers lighting levels needed for cameras to function properly and types of recording devices from VCRs to DVRs. Multiplexers allow simultaneous recording from multiple cameras on one tape but not in real time like a switcher. Factors to consider when choosing a DVR include number of channels, resolution, frame rates, and display options.
Instruction Manual | Sig Sauer Romeo7 1x30 | Optics TradeOptics-Trade
This document is the owner's manual for the SIG SAUER ROMEO7 1x30mm full-size red dot sight. It includes descriptions of the key features of the sight such as its 2 MOA dot size, MOTAC motion activation, and 62,500 hour battery life. The manual provides instructions on operating the sight, mounting it, making windage and elevation adjustments, and basic maintenance. It also includes the SIG SAUER Electro-Optics Infinite Guarantee and 5-year warranty information, along with specifications for the ROMEO7 sight.
Instruction Manual | Sig Sauer Romeo4T 1x20 | Optics TradeOptics-Trade
This document is an owner's manual for the SIG Sauer Romeo4T compact red dot sight. It includes 3 sentences:
The manual provides instructions on operating the sight, including turning it on/off and adjusting the illumination and point of impact. It also outlines maintaining the sight, troubleshooting issues, and specifications. The manual covers the SIG Sauer lifetime guarantee for repairs or replacements if the sight becomes damaged or defective.
We are here to help you.
A comprehensive presentation about CCTV cameras to understand your requirementS and thus make the right decision about what works best for your security concerns.
We would love to hear about your concern and help you choose the right solutions.
CCTV systems use video cameras to transmit signals to specific monitors rather than broadcasting publicly. They can use point-to-point, point-to-multipoint, or mesh wireless links. CCTV is commonly used for security purposes like crime prevention, monitoring premises and restricted areas, and deterring theft. The key components of a CCTV system include cameras, a digital video recorder or network video recorder for recording footage, hard disks for storage, and cabling for video and power transmission. IP cameras connect over a network using CAT5/6 cabling while analog cameras use coaxial cables.
CCTV systems use video cameras to transmit signals to specific monitors rather than broadcasting publicly. There are several reasons to use CCTV systems, including crime prevention and monitoring public/high security areas. CCTV can reduce crime in covered areas by over 95% according to some statistics. Properly installed CCTV systems can dramatically reduce crime levels by as much as 90%. While initial costs were previously high, CCTV equipment costs have decreased and provide effective security for small to medium businesses.
This document provides instructions for installing and calibrating a 3D surround view monitoring system. It describes routing camera wires, installing the 4 cameras, and connecting the host device. The calibration process involves placing calibration tapes and boxes around the vehicle and using the remote to mark 8 calibration points for each camera. Proper calibration is important for accurate video merging and surround view imaging.
Video Surveillance Equipment (Introduction)Ahmer Hamid
This document is intended to aid in learning basics of video surveillance equipment. This can also help you design a basic CCTV network, select appropriate equipment, understand the differences and imagine a solution. Furthermore it is focused on IP Cameras and we have not shared a broad detail about analogue system.
The document summarizes the Mercury TM1200 PCB-mount analog encoders from Electromate. The Mercury 1200 encoder has a small sensor that mounts directly onto a printed circuit board. It provides analog sine/cosine and index window outputs and can achieve high resolution for both linear and rotary position measurement through customer interpolation electronics. Key features include small size, broad alignment tolerances, and ability to achieve resolutions as precise as 0.078um for linear or 4.2 million counts per revolution for rotary.
Instruction Manual | Sig Sauer Romeo8H/8T 1x38 | Optics TradeOptics-Trade
This document is an owner's manual for the SIG SAUER ROMEO8 1x38mm red dot sight. It includes sections on key features, product identification, operation instructions, mounting instructions, sight adjustments, maintenance, troubleshooting, reticle information, specifications, and warranty information. The manual provides details on installing and operating the red dot sight, including turning it on/off, changing reticle patterns and brightness settings, zeroing the sight, and basic maintenance.
Here are the key safety warnings to prevent injury and equipment damage:
- Do not disassemble, modify, or attempt to repair the equipment yourself.
- Do not leave equipment near heat sources or inside vehicles, as it may cause burns or fires.
- Prevent damage to cords and cables as it may cause shock or fire.
- Be careful of fragile parts on the equipment. Do not drop or allow hard impacts.
- Keep equipment away from water and flammable gases.
- Use specified batteries, chargers, and accessories only. Unapproved models may damage the equipment or cause fires.
Instruction Manual | Sig Sauer Bravo Sights | Optics TradeOptics-Trade
This document is the owner's manual for the BRAVO3 and BRAVO5 battle sights manufactured by SIG Sauer. It provides information on the key features and specifications of the sights, how to operate them, change batteries, adjust settings, mount them, and maintain them. It also details SIG Sauer's limited warranty and infinite guarantee policies that cover repairs or replacements if the sights become damaged or defective.
Each Viseum IMC Thermal Security Camera has multiple surveillance cameras built inside a single Viseum IMC camera unit for complete long range panoramic coverage in any direction up to 360°. For each long range thermal camera deployment the required number of fixed thermal security cameras are put into each IMC camera unit and directed at the zone areas to be automatically protected.
The document is an owner's manual for the SIG SAUER OSCAR3 mini spotting scope. It contains sections on key features, product identification, setup, operation, maintenance, troubleshooting, and specifications. The OSCAR3 features image stabilization technology, low dispersion glass, and a rugged polymer housing. It comes with a case, lanyard, and batteries. The manual provides instructions on installation, operation including magnification adjustment and focus, as well as maintenance tips and troubleshooting solutions. The scope has a lifetime guarantee and 5-year warranty on electronic components from SIG SAUER.
The document provides product details and specifications for an Andrew 78EZDM connector. Specifically, it describes the connector as a 7/16 DIN male EZfit connector for 7/8 inch FXL780 and AVA550 cables. It lists technical specifications such as impedance, frequency band, insertion loss, environmental specifications, and regulatory compliance information for the connector.
Surveon provides complete megapixel surveillance solutions including network cameras, network video recorders (NVRs), and video management software. Their solutions address the main challenges of megapixel surveillance such as large bandwidth requirements, huge storage needs, and lack of integrated solutions. Surveon offers a full line of megapixel cameras and NVRs that are designed and manufactured in-house to provide reliable, high-performance video surveillance.
Digital Watchdog DWC-MC352DIR User ManualJMAC Supply
The document provides instructions for installing and using a Micro Dome Camera. It includes precautions to take when installing the camera such as avoiding electric or magnetic fields. It also summarizes the camera's key features like its 1/3" CCD sensor, 3.6mm fixed iris lens, and IP66 certification. Installation instructions are provided along with diagrams showing how to connect the camera and adjust its position. Troubleshooting tips and warranty information are also included.
This document provides information about purchasing an Andrew A7TDF-PS connector including contact information, payment options, shipping details, warranty, and product specifications. The Andrew A7TDF-PS is a 1-5/8 inch DIN female connector for wireless applications. Launch 3 Telecom offers the connector for sale and provides additional telecom services including repairs, maintenance contracts, installation, and asset recovery.
The document provides product specifications for an Andrew AL7DM-PSA 1 5/8" DIN-Male connector, including technical details, ordering and contact information from the supplier Launch 3 Telecom. Key details include the connector's frequency range, impedance, power handling capacity, dimensions, operating temperature range, and certifications.
Digital Watchdog DWC-HF21M4TIR User ManualJMAC Supply
Buy the Digital Watchdog DWC-HF21M4TIR at JMAC Supply.
https://www.jmac.com/Digital_Watchdog_DWC_HF21M4TIR_p/digital-watchdog-dwc-hf21m4tir.htm?=slideshare
This document provides information about phacoemulsification handpieces and harmonic scalpels. It discusses:
1) How phacoemulsification works using piezoelectric handpieces to break up cataracts using ultrasonic vibrations.
2) The components of phaco handpieces including the piezoelectric crystals, irrigation/aspiration ports, and connectors.
3) Common reasons for handpiece failure like moisture intrusion during sterilization, temperature changes, and general wear and tear over time.
4) The repair process which involves complete disassembly, cleaning, testing and replacement of worn components before reassembly.
More Related Content
Similar to Endoscopic video camera_training_7-09[1][1]
Instruction Manual | Sig Sauer Romeo7 1x30 | Optics TradeOptics-Trade
This document is the owner's manual for the SIG SAUER ROMEO7 1x30mm full-size red dot sight. It includes descriptions of the key features of the sight such as its 2 MOA dot size, MOTAC motion activation, and 62,500 hour battery life. The manual provides instructions on operating the sight, mounting it, making windage and elevation adjustments, and basic maintenance. It also includes the SIG SAUER Electro-Optics Infinite Guarantee and 5-year warranty information, along with specifications for the ROMEO7 sight.
Instruction Manual | Sig Sauer Romeo4T 1x20 | Optics TradeOptics-Trade
This document is an owner's manual for the SIG Sauer Romeo4T compact red dot sight. It includes 3 sentences:
The manual provides instructions on operating the sight, including turning it on/off and adjusting the illumination and point of impact. It also outlines maintaining the sight, troubleshooting issues, and specifications. The manual covers the SIG Sauer lifetime guarantee for repairs or replacements if the sight becomes damaged or defective.
We are here to help you.
A comprehensive presentation about CCTV cameras to understand your requirementS and thus make the right decision about what works best for your security concerns.
We would love to hear about your concern and help you choose the right solutions.
CCTV systems use video cameras to transmit signals to specific monitors rather than broadcasting publicly. They can use point-to-point, point-to-multipoint, or mesh wireless links. CCTV is commonly used for security purposes like crime prevention, monitoring premises and restricted areas, and deterring theft. The key components of a CCTV system include cameras, a digital video recorder or network video recorder for recording footage, hard disks for storage, and cabling for video and power transmission. IP cameras connect over a network using CAT5/6 cabling while analog cameras use coaxial cables.
CCTV systems use video cameras to transmit signals to specific monitors rather than broadcasting publicly. There are several reasons to use CCTV systems, including crime prevention and monitoring public/high security areas. CCTV can reduce crime in covered areas by over 95% according to some statistics. Properly installed CCTV systems can dramatically reduce crime levels by as much as 90%. While initial costs were previously high, CCTV equipment costs have decreased and provide effective security for small to medium businesses.
This document provides instructions for installing and calibrating a 3D surround view monitoring system. It describes routing camera wires, installing the 4 cameras, and connecting the host device. The calibration process involves placing calibration tapes and boxes around the vehicle and using the remote to mark 8 calibration points for each camera. Proper calibration is important for accurate video merging and surround view imaging.
Video Surveillance Equipment (Introduction)Ahmer Hamid
This document is intended to aid in learning basics of video surveillance equipment. This can also help you design a basic CCTV network, select appropriate equipment, understand the differences and imagine a solution. Furthermore it is focused on IP Cameras and we have not shared a broad detail about analogue system.
The document summarizes the Mercury TM1200 PCB-mount analog encoders from Electromate. The Mercury 1200 encoder has a small sensor that mounts directly onto a printed circuit board. It provides analog sine/cosine and index window outputs and can achieve high resolution for both linear and rotary position measurement through customer interpolation electronics. Key features include small size, broad alignment tolerances, and ability to achieve resolutions as precise as 0.078um for linear or 4.2 million counts per revolution for rotary.
Instruction Manual | Sig Sauer Romeo8H/8T 1x38 | Optics TradeOptics-Trade
This document is an owner's manual for the SIG SAUER ROMEO8 1x38mm red dot sight. It includes sections on key features, product identification, operation instructions, mounting instructions, sight adjustments, maintenance, troubleshooting, reticle information, specifications, and warranty information. The manual provides details on installing and operating the red dot sight, including turning it on/off, changing reticle patterns and brightness settings, zeroing the sight, and basic maintenance.
Here are the key safety warnings to prevent injury and equipment damage:
- Do not disassemble, modify, or attempt to repair the equipment yourself.
- Do not leave equipment near heat sources or inside vehicles, as it may cause burns or fires.
- Prevent damage to cords and cables as it may cause shock or fire.
- Be careful of fragile parts on the equipment. Do not drop or allow hard impacts.
- Keep equipment away from water and flammable gases.
- Use specified batteries, chargers, and accessories only. Unapproved models may damage the equipment or cause fires.
Instruction Manual | Sig Sauer Bravo Sights | Optics TradeOptics-Trade
This document is the owner's manual for the BRAVO3 and BRAVO5 battle sights manufactured by SIG Sauer. It provides information on the key features and specifications of the sights, how to operate them, change batteries, adjust settings, mount them, and maintain them. It also details SIG Sauer's limited warranty and infinite guarantee policies that cover repairs or replacements if the sights become damaged or defective.
Each Viseum IMC Thermal Security Camera has multiple surveillance cameras built inside a single Viseum IMC camera unit for complete long range panoramic coverage in any direction up to 360°. For each long range thermal camera deployment the required number of fixed thermal security cameras are put into each IMC camera unit and directed at the zone areas to be automatically protected.
The document is an owner's manual for the SIG SAUER OSCAR3 mini spotting scope. It contains sections on key features, product identification, setup, operation, maintenance, troubleshooting, and specifications. The OSCAR3 features image stabilization technology, low dispersion glass, and a rugged polymer housing. It comes with a case, lanyard, and batteries. The manual provides instructions on installation, operation including magnification adjustment and focus, as well as maintenance tips and troubleshooting solutions. The scope has a lifetime guarantee and 5-year warranty on electronic components from SIG SAUER.
The document provides product details and specifications for an Andrew 78EZDM connector. Specifically, it describes the connector as a 7/16 DIN male EZfit connector for 7/8 inch FXL780 and AVA550 cables. It lists technical specifications such as impedance, frequency band, insertion loss, environmental specifications, and regulatory compliance information for the connector.
Surveon provides complete megapixel surveillance solutions including network cameras, network video recorders (NVRs), and video management software. Their solutions address the main challenges of megapixel surveillance such as large bandwidth requirements, huge storage needs, and lack of integrated solutions. Surveon offers a full line of megapixel cameras and NVRs that are designed and manufactured in-house to provide reliable, high-performance video surveillance.
Digital Watchdog DWC-MC352DIR User ManualJMAC Supply
The document provides instructions for installing and using a Micro Dome Camera. It includes precautions to take when installing the camera such as avoiding electric or magnetic fields. It also summarizes the camera's key features like its 1/3" CCD sensor, 3.6mm fixed iris lens, and IP66 certification. Installation instructions are provided along with diagrams showing how to connect the camera and adjust its position. Troubleshooting tips and warranty information are also included.
This document provides information about purchasing an Andrew A7TDF-PS connector including contact information, payment options, shipping details, warranty, and product specifications. The Andrew A7TDF-PS is a 1-5/8 inch DIN female connector for wireless applications. Launch 3 Telecom offers the connector for sale and provides additional telecom services including repairs, maintenance contracts, installation, and asset recovery.
The document provides product specifications for an Andrew AL7DM-PSA 1 5/8" DIN-Male connector, including technical details, ordering and contact information from the supplier Launch 3 Telecom. Key details include the connector's frequency range, impedance, power handling capacity, dimensions, operating temperature range, and certifications.
Digital Watchdog DWC-HF21M4TIR User ManualJMAC Supply
Buy the Digital Watchdog DWC-HF21M4TIR at JMAC Supply.
https://www.jmac.com/Digital_Watchdog_DWC_HF21M4TIR_p/digital-watchdog-dwc-hf21m4tir.htm?=slideshare
Similar to Endoscopic video camera_training_7-09[1][1] (20)
This document provides information about phacoemulsification handpieces and harmonic scalpels. It discusses:
1) How phacoemulsification works using piezoelectric handpieces to break up cataracts using ultrasonic vibrations.
2) The components of phaco handpieces including the piezoelectric crystals, irrigation/aspiration ports, and connectors.
3) Common reasons for handpiece failure like moisture intrusion during sterilization, temperature changes, and general wear and tear over time.
4) The repair process which involves complete disassembly, cleaning, testing and replacement of worn components before reassembly.
Scalpel repair procedure, skalperin korjausCaporex Oy
Caporex Oy ja Benjamin Biomedical ovat tehneet yhteistyösopimuksen phacokäsikappaleiden, skalpereiden ym. korjauksesta. Benjamin Biomedical on maailman suurin alan korjausyritys. Heillä on ISO certifikaatti ja EU hyväksyntä. Heidän toimintaa auditoidaan vuosittain.
Volk Optical Inc. is a world leader in ophthalmic lenses and equipment located in Mentor, Ohio. Founded in 1975 by ophthalmologist David Volk, the company produces diagnostic, therapeutic, and surgical lenses and accessories. Volk Optical is known for Dr. Volk's original aspheric lens designs from the 1940s and offers a wide range of classic and digital lens types, including slit lamp, contact, imaging, and gonio lenses. The company prides itself on extensive warranties, high quality glass optics, new product development, and providing the best overall value in ophthalmic lenses.
This document provides information about Volk Optical Inc., a manufacturer of ophthalmic lenses and surgical systems located in Mentor, Ohio. It describes Volk's classic and digital series of indirect lenses for slit lamp examinations and indirect ophthalmoscopy, including specifications for field of view, magnification, working distance, and primary applications. Contact information is provided for ordering lenses or contacting Volk via phone, fax, email and the company's website.
Covey says most people look for quick fixes. They see a big success and want to know how he did it, believing (and hoping) they can do the same following a quick bullet list.
But real change, the author says, comes not from the outside in, but from the inside out. And the most fundamental way of changing yourself is through a paradigm shift.
That paradigm shift is a new way of looking at the world. The 7 Habits of Highly Effective People presents an approach to effectiveness based on character and principles.
The first three habits indeed deal with yourself because it all starts with you. The first three habits move you from dependence from the world to the independence of making your own world.
Habits 4, 5 and 6 are about people and relationships. The will move you from independence to interdependence. Such, cooperating to achieve more than you could have by yourself.
The last habit, habit number 7, focuses on continuous growth and improvement.
Understanding of Self - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
You may be stressed about revealing your cancer diagnosis to your child or children.
Children love stories and these often provide parents with a means of broaching tricky subjects and so the ‘The Secret Warrior’ book was especially written for CANSA TLC, by creative writer and social worker, Sally Ann Carter.
Find out more:
https://cansa.org.za/resources-to-help-share-a-parent-or-loved-ones-cancer-diagnosis-with-a-child/
Aggression - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
ProSocial Behaviour - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
2. Introduction
Endoscopic video cameras are used most
often with rigid scopes; occasionally with
flexible scopes for less invasive procedures.
Each camera head contains a video chip
(CCD) that converts the image in view into
an electronic signal.
3. Introduction
Signals are received at the console from the
camera, through the cable. The console
processes the image and forwards the video
signal to the monitor.
Most cameras work only with consoles of
the same manufacturer.
The camera is attached to the eyepiece of
the scope by a coupler.
7. Introduction
Cameras come in single video chip (CCD)
and 3 chip configurations. The newer, more
popular models are 3 chip.
Examples : 3 chip
Stryker 882,888,988,1088, 1188, 1288
Dyonics D3, ED3, 470H, 560
9. Introduction
There are over 70 different models of
cameras in existence. Our repair services
cover approximately 75% of these models,
but 98% of the most popular models in use.
On June 5th, 2008, We expanded through
acquisition and spent the recent months
raising the quality and service level to our
standards…ISO, FDA, CE.
11. Selling Camera Repair
Cameras are found in use in surgery;
orthopedic, urology, obgyn, & general in
hospitals, outpatient and free standing
surgery centers.
Many facilities are unaware that an
alternative to the manufacturer exists for
repair.
12. Selling Camera Repair
OEM’s do their best to convince the
customer that they alone are qualified to
repair their cameras. OEM’s, such as
Stryker , do not manufacturer all the
electrical and cable components for their
cameras. They purchase pre-manufactured
components and assemble them into their
cameras. Ex : 1188 cable
13. Selling Camera Repair
Your historic relationship with customers
and the quality repair service you have
provided them on other instruments, is the
best starting place. Benjamin enables you to
offer significant savings, reduced turn
times, and the highest possible repair
quality process.
14. Selling Camera Repair
We utilize original OEM components where
available and all our components and materials are
manufactured to match those of the OEM.
Each of our repairs receives new cable, new
connector assembly, and new seals. All of our
polymers, adhesives and seals are approved to
withstand cleaning solutions and processes in use.
16. Selling Camera Repair
Each repair is leak tested, tested for
electrical safety, tested for image quality
and undergoes a rigorous total quality
examination process.
A visual report of the image is available to
the customer with the repair.
18. Selling Camera Repairs
Our turn time on camera repairs will be 3 to
5 days or less and repair exchanges as they
are available.
Our warranty on components and
workmanship is 90 days.
19. Selling Camera Repairs
Common complaints :
Visual damage; hole or cut in cable.
Video noise.
Cloudy/foggy image, color blotches.
Won’t white balance.
20. Selling Camera Repair
These problems are caused by breakage or
disconnects at the connector assembly most
often. Fluid invasion or CCD circuit failure
are also seen. Connector breakage occurs as
a result of repeatedly bending/twisting the
cable where it connects to the camera.
21. Selling Camera Repair
Fluid invades the camera through cuts/holes
in the cable, through worn/damaged seals
(repeated sterilization) or by simply
forgetting to apply the soak cap prior to
cleaning. CCD circuits may fail over time
but are historically very dependable and
represent about 15% of problems.
22. Selling Camera Repair
It is not uncommon to have the pigtail
(cable extension) stretched to the point of
damaging cable components and
connectors.
Damage naturally occurs from frequent use,
handling and cleaning.
23. Selling camera Repair
Questions to ask :
What is the make/model of the camera ?
What is the complaint ?
Who registered the complaint ?
Are you sending just the camera ?
coupler, pigtail ?
How old is the camera ?
24. Selling camera repair
Questions continued :
Does the camera work when couplers are
changed ?
Is the camera making a buzzing noise ?
25. Selling Camera Repair
Common responses :
I have no idea…it doesn’t work.
The picture is bad.
It’s making noise.
26. Initial Camera Repairs
Beginning in April 2006 we initiated repairs
on the Stryker line of cameras. We now are
a full service camera repair company, which
includes cameras, processors, light sources,
couplers and pigtails. Our current warranty
rate is 3.9%, a number that is under constant
review.
27. Initial Camera Repairs
We will grow our service capabilities as
new cameras come onto the market.
Presently we are examining the Dyonics
560 and Dyonics 470H autoclave prism
replacement, and awaiting the Stryker 1288,
all of which will enter R&D as soon as
possible.
33. BENJAMIN BIOMEDICAL CAMERA REPAIR
Camera Repair descriptions are for all makes and models of cameras.
Minor Repair may include:
Replace button cover, button pad, button
board or all three, replace damaged lens,
replace front section of camera head,
replace soak cap, replace front seal.
34. Standard Repair
Minor repairs plus; replace cable, replace
connector assembly, replace strain relief,
replace flexible printed circuit board,
vacuum fluid removal, realign prism CCD,
replace IR filter, replace complete camera
housing, replace seals, replace housing nut.
35. Major Repairs
Minor repairs plus, Standard repairs, plus
repair/replace CCD electronics,
align/replace imager, and replace prism.
36. Extensive Repairs
Stryker 1188, Storz Image One, and
Olympus OTV Series.
Standard repairs plus, replace connector
edge card, clean and repair switch
assembly, replace paddle-card, replace
paddle-card housing, repair or replace
beam-splitter, replace headboard, repair
internal coupler, realign or replace prism.
37. Coupler Repair
Make necessary mechanical adjustments
such as lock and release, repair or replace
tension springs, tighten or replace set and
lock screws, repair focus ring, replace focus
O-ring, replace seals, repair coupler zoom,
repair scope mount, replace lens.
38. Repair Facts
60% of all our repairs are because of cable
damage
30% is video damage (prism/CCD
electronics)
10% is minor and coupler repairs
39. Stryker Issues
Strain reliefs coming off
Cable jackets coming loose
Moisture in connectors from loose soak
caps. (Some are even missing o-ring)
Camera was autoclaved
40. Dyonics/Smith & Nephew
Damaged cables at camera head end.
Cracked IR filter. (lens)
Damaged camera heads. (plastic)
Remote damaged; button functions.
41. Olympus
Cable damage; thin cable on OTV-S7 90
degree model. (Most popular model)
Paddle cards damaged. (Plastic)
Optics fogged; usually requiring
disassembly and cleaning.
42. Karl Storz
Image 1 newest and most popular model.
Moisture intrusion; Coupler damaged
These cameras require extra attention to
detail and workmanship. These cameras
must be cut into to fix the coupler. Coupler
has tiny ball bearings that must be
assembled accurately.