Ellis Patents VRT+17 Vulcan Stainless Steel Cable Cleats
•
1 like•206 views
The document provides information on Vulcan + cable cleats, including: - They come with a polymeric liner and removable base pad to protect cables during short circuits. - They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand. - They have a compact, patented design for easy installation in limited spaces and are made of stainless steel for durability. - Technical specifications, test results, and approvals are provided to demonstrate the cable cleats' performance.
Report
Share
Report
Share
Download to read offline
Recommended
Ellis Patents VRT Vulcan Cable Cleats - Spec Sheet
The document provides information on Vulcan + cable cleats, including:
- They come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- They have a compact, patented design for easy installation in limited spaces and are made of stainless steel for durability.
- Technical specifications, test results, and approvals are provided to demonstrate the cable cleats' performance.
Ellis Patents VRQ Vulcan Quadrafoil Cable Cleats (Quad) - Spec Sheet
The document provides information on Vulcan + cable cleats, including:
- They come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- They have a compact, patented design for easy installation in limited spaces and are made of stainless steel for durability.
- Technical specifications, test results, and approvals are provided to demonstrate the cable cleats' performance.
Ellis Patents Vulcan Stainless Steel Cable Cleats - Spec Sheet
The document provides information on Vulcan + cable cleats, including:
- The cleats come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- The compact design allows for easy installation in space-limited areas. The cleats are made of stainless steel for protection against harsh environments.
- Testing information shows the cleats withstand lateral and axial loads, electro-mechanical forces, impact resistance, and needle flame tests according to IEC standards.
Ellis Patents Vulcan Cable Cleats VRQ Quadrofoil Cleats - Specification
Ellis Patents Vulcan Cable Cleats VRQ Quadrofoil Cleats - SpecificationThorne & Derrick International
Vulcan + cable cleats are designed for trefoil, single, quad and bundled cable applications where moderate short circuit withstand is required. They have a compact, patented design that allows for easy installation in spaces with limited space. The cleats are made of stainless steel to withstand harsh environments and include a polymeric liner and removable base pad to protect cables during short circuits. They have passed testing for impact resistance, resistance to electro-mechanical forces, and can withstand temperatures from -40 to 60 degrees Celsius.Ellis Patents Vulcan Cable Cleats
This document describes Vulcan+ cable cleats for securing cables. The cleats come in multiple sizes to accommodate different cable diameters and configurations. They are made of stainless steel for durability in harsh environments. The cleats have an integrated liner and pad to cushion cables during short circuits. Installation instructions provide bolt size and spacing recommendations depending on the expected short circuit test level. Tables provide the specifications for different cleat models for trefoil, single, and quad cable applications.
Ellis Patents Cable Cleats, Clamps & Hangers - Catalogue
This document is an electrical product catalogue from Ellis that includes information about various cable cleat products. It summarizes that Ellis cable cleats are tested to high standards to guarantee they will contain short-circuit forces and protect infrastructure. The catalogue then provides details on specific cleat product lines including Alpha, Emperor and Vulcan+ cleats. It describes the materials, maximum short-circuit test levels, recommended spacing and fixing for each product. Dimensions, weights and part numbers are shown in selection tables.
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
Ellis Patents Vulcan Cable Cleats - Stainless Steel Single & Trefoil Cable Cl...
Ellis Patents Vulcan Cable Cleats - Stainless Steel Single & Trefoil Cable Cl...Thorne & Derrick International
Ellis Patents Cable Cleats - Vulcan+ cable cleats have a unique compact design so they can be easily installed to cable tray and cable basket, even when space is limited. Ellis Patents Vulcan+ cleats are available in multiple sizes with range taking capability to suit trefoil, single, quad or bundled cables. Manufactured in type 316L stainless steel, Vulcan cable cleats offer excellent protection against the harshest environmental conditions. To protect and cushion the high voltage cables during short-circuit conditions, the Vulcan cable cleat comes with an integral Low Smoke and Fume Zero Halogen Polymeric liner and base pad.
Vulcan stainless steel cable cleats are suitable for single, trefoil, quad and bundled cable installations where moderate levels of short circuit withstand are required.
Ellis Patents Vulcan stainless steel cable cleats feature a compact design allowing easy installation where space is limited.
Manufactured in type 316 stainless steel Vulcan cable cleats offer ultimate protection against the harshest environmental conditions providing excellent service performance in the offshore, marine, oil, gas and petrochemicals industry.
Vulcan stainless steel cable cleats come with an integral LSF Zero Halogen Polymeric liner and base pad to protect and cushion the cables during short circuit conditions.
Recommended fixing methods for Vulcan VRT+ cleats include using one 10mm bolt for (sizes VRT 00 to 09) and one or two 10mm bolts for (sizes VRT 10 to 20).
Recommended
Ellis Patents VRT Vulcan Cable Cleats - Spec Sheet
The document provides information on Vulcan + cable cleats, including:
- They come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- They have a compact, patented design for easy installation in limited spaces and are made of stainless steel for durability.
- Technical specifications, test results, and approvals are provided to demonstrate the cable cleats' performance.
Ellis Patents VRQ Vulcan Quadrafoil Cable Cleats (Quad) - Spec Sheet
The document provides information on Vulcan + cable cleats, including:
- They come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- They have a compact, patented design for easy installation in limited spaces and are made of stainless steel for durability.
- Technical specifications, test results, and approvals are provided to demonstrate the cable cleats' performance.
Ellis Patents Vulcan Stainless Steel Cable Cleats - Spec Sheet
The document provides information on Vulcan + cable cleats, including:
- The cleats come with a polymeric liner and removable base pad to protect cables during short circuits.
- They are available for trefoil, single, quad, and bundled cable applications requiring moderate short circuit withstand.
- The compact design allows for easy installation in space-limited areas. The cleats are made of stainless steel for protection against harsh environments.
- Testing information shows the cleats withstand lateral and axial loads, electro-mechanical forces, impact resistance, and needle flame tests according to IEC standards.
Ellis Patents Vulcan Cable Cleats VRQ Quadrofoil Cleats - Specification
Ellis Patents Vulcan Cable Cleats VRQ Quadrofoil Cleats - SpecificationThorne & Derrick International
Vulcan + cable cleats are designed for trefoil, single, quad and bundled cable applications where moderate short circuit withstand is required. They have a compact, patented design that allows for easy installation in spaces with limited space. The cleats are made of stainless steel to withstand harsh environments and include a polymeric liner and removable base pad to protect cables during short circuits. They have passed testing for impact resistance, resistance to electro-mechanical forces, and can withstand temperatures from -40 to 60 degrees Celsius.Ellis Patents Vulcan Cable Cleats
This document describes Vulcan+ cable cleats for securing cables. The cleats come in multiple sizes to accommodate different cable diameters and configurations. They are made of stainless steel for durability in harsh environments. The cleats have an integrated liner and pad to cushion cables during short circuits. Installation instructions provide bolt size and spacing recommendations depending on the expected short circuit test level. Tables provide the specifications for different cleat models for trefoil, single, and quad cable applications.
Ellis Patents Cable Cleats, Clamps & Hangers - Catalogue
This document is an electrical product catalogue from Ellis that includes information about various cable cleat products. It summarizes that Ellis cable cleats are tested to high standards to guarantee they will contain short-circuit forces and protect infrastructure. The catalogue then provides details on specific cleat product lines including Alpha, Emperor and Vulcan+ cleats. It describes the materials, maximum short-circuit test levels, recommended spacing and fixing for each product. Dimensions, weights and part numbers are shown in selection tables.
Ellis Patents Atlas Cable Cleats (Single & Trefoil Cable Cleats)
Atlas cable cleats suit trefoil and single way cable applications where high levels of short circuit withstand are required.
As well as providing the cables with significant mechanical support, the unique patented Atlas cable cleat design provides a choice of one bolt, two bolt or framing channel fixing options.
Manufactured in stainless and galvanised steel all range taking Atlas cable cleats are supplied with a stainless steel top bolt to eliminate eddy currents.
To protect and cushion the cables during short circuit conditions the Atlas cable cleat comes with integral LSF Zero Halogen Polymeric pads.
Ellis Patents Atlas range taking cable cleats have been tested in accordance with the European Standard of "Cable Cleats for Electrical Installations" BS EN 50368 : 2003 - Ellis Patents are the global leader in the manufacture of quality and trusted single way, trefoil, quadrafoil and range taking cable cleats.
Ellis Patents Vulcan Cable Cleats - Stainless Steel Single & Trefoil Cable Cl...
Ellis Patents Vulcan Cable Cleats - Stainless Steel Single & Trefoil Cable Cl...Thorne & Derrick International
Ellis Patents Cable Cleats - Vulcan+ cable cleats have a unique compact design so they can be easily installed to cable tray and cable basket, even when space is limited. Ellis Patents Vulcan+ cleats are available in multiple sizes with range taking capability to suit trefoil, single, quad or bundled cables. Manufactured in type 316L stainless steel, Vulcan cable cleats offer excellent protection against the harshest environmental conditions. To protect and cushion the high voltage cables during short-circuit conditions, the Vulcan cable cleat comes with an integral Low Smoke and Fume Zero Halogen Polymeric liner and base pad.
Vulcan stainless steel cable cleats are suitable for single, trefoil, quad and bundled cable installations where moderate levels of short circuit withstand are required.
Ellis Patents Vulcan stainless steel cable cleats feature a compact design allowing easy installation where space is limited.
Manufactured in type 316 stainless steel Vulcan cable cleats offer ultimate protection against the harshest environmental conditions providing excellent service performance in the offshore, marine, oil, gas and petrochemicals industry.
Vulcan stainless steel cable cleats come with an integral LSF Zero Halogen Polymeric liner and base pad to protect and cushion the cables during short circuit conditions.
Recommended fixing methods for Vulcan VRT+ cleats include using one 10mm bolt for (sizes VRT 00 to 09) and one or two 10mm bolts for (sizes VRT 10 to 20).
Star Delta Starters & Isolators 11KW ATEX Certified Zone 1 Hazardous Area Mot...
Star Delta Starters & Isolators 11KW ATEX Certified Zone 1 Hazardous Area Mot...Thorne & Derrick International
Petrel Star Delta Motor Starter Features - G20
Heavy duty cast motor starter enclosures
Wide size range for efficient use of space
Close coupling option for isolation unit
Cable entries M20 to M75
The Petrel range of EEx d Star Delta Motor Starters are intended for hazardous areas Zone 1 installation - Petrel G20 cast alloy or iron explosion proof enclosures are ATEX certified, standard push button starter units through to custom designed control panels can be produced to specification.
Petrel Star Delta hazardous are Zone 1 motor starters with ATEX certification are designed for manual starting of motors within the specified kW power output range and are available with or without an isolator.
Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 58 Watt Singl...
Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 58 Watt Singl...Thorne & Derrick International
Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 58 Watt Single Zone 2 ATEX Luminaire Cold shrink splice kit 3 m 8428 18
3M produces Cold Shrink EPDM Tubes called PST Connector Insulators that are used to insulate electrical connections. The tubes are made of EPDM rubber and come in various sizes to accommodate different cable diameters. They are pre-stretched and shrink to form a waterproof seal around connections when a removable core is withdrawn. PST tubes provide insulation, protection from water and chemicals, and can be used for both indoor and outdoor applications including direct burial.
ABB Contactors - 3 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Contactors - 3 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Extended Product Type:
ABB AF09-30-10-11
ABB Product ID:
ABB 1SBL137001R1110
EAN: 3471523110014
ABB Catalogue Description:
ABB AF09-30-10-11 24-60V50/60HZ 20-60VDC Contactor
ABB AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. ABB contactors are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. ABB AF contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four ABB coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. ABB AF contactors can manage large control voltage variations. One ABB coil can be used for different control voltages used worldwide without any coil change. ABB AF contactors have built-in surge protection and do not require additional surge suppressors. The ABB AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: AF..-30-..-11 not suitable for a direct control by PLC-output. AF..-30-..-11 contactor type available in some countries: please consult Throen & Derrick tel 00 44 191 4901547
Prysmian Mine Master Electrical Cables For Mining Industry
Prysmian manufactures composite screened cables for use in underground coal mines. The Type 209 cable is designed for general use in underground mines from 1.1-11kV in accordance with Australian standards. It has tinned copper conductors, EPR insulation, a composite screen, and a heavy duty PCP sheath. The cable is highly flexible and resistant to harsh and wet underground mining environments.
Polypipe Cable Ducting - Ridgicoil Power Cable Duct
The document discusses Ridgiduct, a twin wall cable protection system made of HDPE plastic. Ridgiduct is lightweight yet robust and outperforms alternative products. It is available in various standard sizes to comply with ENATS specifications for electrical cable protection and has been certified by the BBA. Benefits include flexibility, durability, and compliance with industry standards for electrical utilities. The document also lists available Ridgiduct products and specifications.
Wolf ATEX Turbolites - Spec Sheet
The ATEX Turbolite is a high-powered compressed air lamp that meets European and American safety standards for use in explosive atmospheres. It provides illumination for hazardous industrial activities like tank cleaning and pipeline work. Models include area lights and flood lights available in aluminum or brass housings. The lamp is powered by a turbine driven by compressed air, which generates electricity to power a halogen bulb. It has improvements like sealed bearings and stainless steel components for greater reliability.
ATEX Mobile Phones - Hazardous Area (Zone 1 Zone 21) & Intrinsically Safe - ...
ATEX Mobile Phones - Hazardous Area (Zone 1 Zone 21) & Intrinsically Safe - ...Thorne & Derrick International
This document provides safety instructions and technical specifications for the Ex-Handy 06 explosion-protected mobile phone. It details safety precautions that must be followed when using the device in hazardous areas, including only changing the battery and charging outside the explosive area. The technical data provided includes approval for Zone 1 and 21 hazardous areas. It also gives instructions for commissioning the device, changing the battery, and charging safely.ABB Contactors - 4 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Contactors - 4 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Extended Product Type:
ABB AF09-40-00-11
ABB Product ID:
1SBL137201R1100
EAN: 3471523115019
ABB Catalogue Description:
ABB 4 Pole Contactors : AF09-40-00-11 24-60V50/60HZ 20-60VDC Contactor
ABB AF09 4-pole contactors are used for controlling power circuits up to 690 V AC and 440 V DC. ABB AF09 contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...). ABB AF09 contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. ABB AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. ABB AF contactors have built-in surge protection and do not require additional surge suppressors. The ABB AF... series 4-pole contactors are of the block type design. Main poles and auxiliary contact blocks: 4 N.O. main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: - AF..-..-..-11 not suitable for a direct control by PLC-output. - ABB AF..-..-..-11 type available in some countries: please consult Thorne & Derrick t 00 44 191 4901547
Filoform Cable Joints - Cast Resin Cable Jointing Kits
Filoform Cable Joints - Cast Resin Cable Jointing Kits
Infographic - See How T&D Support & Supply The Rail Industry
Infographic - See How T&D Support & Supply The Rail Industry
Ecom Ex-HSPA 08 LWP - ATEX Hazardous Area Mobile Phone - Data Sheet
This document provides information on an intrinsically safe mobile phone called the Ex-HSPA 08. It lists the phone's functions such as 3G connectivity, Bluetooth, NFC, push-to-talk, and office applications. It also describes accessories like batteries, chargers, cases, mounts, and headsets that are compatible with the phone. The document discusses lone worker protection functionality that allows the phone to trigger alarms and share location if a worker encounters an emergency. It outlines basic and system modes for emergency response.
3M 8428-24 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8428-243M 8428-24 Cold Shrink Tube
Cold Shrink Tube Min Diameter 24.0mm
Cold Shrink Tube Max Diameter 49.3mm
Cold Shrink Tube Length 609mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
8443-6.5 3M Silicone Rubber Cold Shrink Insulators
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-6.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 132mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
Ecom Instruments Hazardous Area Atex Mobile Devices - Phones, Laptops, Radios...
Ecom Instruments Hazardous Area Atex Mobile Devices - Phones, Laptops, Radios...Thorne & Derrick International
This document summarizes ecom, a company that specializes in intrinsically safe mobile devices for use in hazardous environments. Ecom prides itself on German engineering and safety, developing explosion-protected mobile phones and PDAs. As a pioneer in the industry since 1986, ecom works closely with customers to develop customized solutions for industries like oil, gas, and chemicals. Ecom has a global network of partners and aims to maintain the highest safety and quality standards.Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubes 3M
3M 8427-12 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
8447-3.2 3M Silicone Rubber Cold Shrink Insulators
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8447-3.2 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 14mm
Maximum diameter seal 24.13mm
Cold shrink tube length 57mm
No tools or heat shrink gas torches required for installation of 3M cold shrink
Seals tight, retains resilience and pressure even after aging and exposure
Moisture resistant 3M silicone cold shrink
Cold shrink resists acids and alkalies
Resists ozone and UV ultraviolet light
Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube
T&D Gas Detection Article Featured In FS World
The document discusses methane gas detection. It summarizes that the Deepwater Horizon explosion was triggered by a methane bubble escaping from an oil well. Methane is odorless, colorless, and highly flammable, making it dangerous in certain concentrations. It can cause explosions in mining and oil/gas industries. The document then provides details on methane gas properties, detection methods, and safety considerations for methane detection.
3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...
3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...Thorne & Derrick International
This document provides information on 3M medium voltage terminations for JCN and CN cable ranging from 5 kV to 35 kV. It lists various indoor and outdoor termination kits for both 3M's Cold Shrink QT-III and QT-II terminations. The kits contain silicone rubber terminations of different sizes to accommodate different conductor and cable sizes. They are designed for terminating jacketed concentric neutral and concentric neutral power cables.Morgan Marine GRP Roadside Cabinets & Transformer Housings
This document provides specifications for various types of roadside cabinets and transformer housings. It lists the dimensions and features of cabinets in different series, including the TORBAY, SINGLE DOOR HOUSINGS, DOUBLE DOOR HOUSINGS, and TRANSFORMER HOUSINGS series. The cabinets are made of materials like GRP, steel, stainless steel, and aluminum. They can include optional features such as mounting boards, ventilation, insulation, and locking mechanisms. The document also specifies that the cabinets are suited for housing instrumentation, controls, and transformers for uses in industries like utilities and transportation.
Ellis Patents - Cable Cleats, Cable Clamps & Cable Straps
T&D distribute Ellis Patents cable cleats providing safety critical support to vital cable circuits. Cable cleats must withstand peak short circuit forces generated by the actual cable installation - Ellis Patents 3rd party certified cable cleats provide peace of mind containment of low and high voltage cables.
Ellis Patents are global leaders in the innovation and manufacture of nylon, aluminium and stainless steel cable cleats - EP satisfy the operational requirements of the construction, oil, gas, rail, utilities, wind energy and power generation industries.
Holding Power is Ellis Patents guarantee that EP Cable Cleats will contain dangerous short circuit forces - protecting your people, power and plant. Without fail - specify Ellis Patents Cable Cleats.
Alpha cable cleats contain single core power cables in trefoil formation - lightweight, fast to install, strong and robust with unique design providing labour savings. Short circuit withstand test : 31.4kA RMS (72.4kA peak).
Vulcan cable cleats for single, trefoil, quadrafoil and bundled cable installations - suits LV, 11kV-33kV BS6622 and BS7870 Triplex high voltage cables.
Made from stainless steel for non corrosive, high strength and permanent utility cable cleating with compact design.
Ellis Patents are a leading voice in the campaign to have cable cleats reclassified as short-circuit protection devices. A move that would mean cable cleats would be placed on a parallel with fuses and circuit breakers. "This reclassification makes absolute sense. In the event of a cable fault, the forces between cables reach their peak in the first quarter cycle, which is the point that cable cleats earn their crust. In contrast, circuit breakers typically interrupt the fault after 3 or even 5 cycles by which time, if the cable cleats are underspecified, the cables will no longer be secure, but will be putting vital electrical installations and lives at unnecessary risk," says Paul Nolan UK Sales Manager, EP.
Ellis Patents Cable Cleats - General Catalogue
This document provides information about electrical cable cleats manufactured by Ellis Patents. It includes details on various cleat models suitable for different cable and short circuit force applications. The Emperor and Vulcan+ cleats are made of stainless steel and are tested to withstand the highest short circuit forces. The Alpha cleats are made of extruded aluminum and are a robust alternative to traditional aluminum cleats. The document provides specifications, maximum short circuit test levels, recommended cleat spacing and weight for each cleat model suited for trefoil, single or quad cable configurations. It also shares information on testing standards and applications where Ellis cleats are used including rail links, nuclear plants and oil rigs.
More Related Content
Viewers also liked
Star Delta Starters & Isolators 11KW ATEX Certified Zone 1 Hazardous Area Mot...
Star Delta Starters & Isolators 11KW ATEX Certified Zone 1 Hazardous Area Mot...Thorne & Derrick International
Petrel Star Delta Motor Starter Features - G20
Heavy duty cast motor starter enclosures
Wide size range for efficient use of space
Close coupling option for isolation unit
Cable entries M20 to M75
The Petrel range of EEx d Star Delta Motor Starters are intended for hazardous areas Zone 1 installation - Petrel G20 cast alloy or iron explosion proof enclosures are ATEX certified, standard push button starter units through to custom designed control panels can be produced to specification.
Petrel Star Delta hazardous are Zone 1 motor starters with ATEX certification are designed for manual starting of motors within the specified kW power output range and are available with or without an isolator.
Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 58 Watt Singl...
Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 58 Watt Singl...Thorne & Derrick International
Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 58 Watt Single Zone 2 ATEX Luminaire Cold shrink splice kit 3 m 8428 18
3M produces Cold Shrink EPDM Tubes called PST Connector Insulators that are used to insulate electrical connections. The tubes are made of EPDM rubber and come in various sizes to accommodate different cable diameters. They are pre-stretched and shrink to form a waterproof seal around connections when a removable core is withdrawn. PST tubes provide insulation, protection from water and chemicals, and can be used for both indoor and outdoor applications including direct burial.
ABB Contactors - 3 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Contactors - 3 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Extended Product Type:
ABB AF09-30-10-11
ABB Product ID:
ABB 1SBL137001R1110
EAN: 3471523110014
ABB Catalogue Description:
ABB AF09-30-10-11 24-60V50/60HZ 20-60VDC Contactor
ABB AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. ABB contactors are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. ABB AF contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four ABB coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. ABB AF contactors can manage large control voltage variations. One ABB coil can be used for different control voltages used worldwide without any coil change. ABB AF contactors have built-in surge protection and do not require additional surge suppressors. The ABB AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: AF..-30-..-11 not suitable for a direct control by PLC-output. AF..-30-..-11 contactor type available in some countries: please consult Throen & Derrick tel 00 44 191 4901547
Prysmian Mine Master Electrical Cables For Mining Industry
Prysmian manufactures composite screened cables for use in underground coal mines. The Type 209 cable is designed for general use in underground mines from 1.1-11kV in accordance with Australian standards. It has tinned copper conductors, EPR insulation, a composite screen, and a heavy duty PCP sheath. The cable is highly flexible and resistant to harsh and wet underground mining environments.
Polypipe Cable Ducting - Ridgicoil Power Cable Duct
The document discusses Ridgiduct, a twin wall cable protection system made of HDPE plastic. Ridgiduct is lightweight yet robust and outperforms alternative products. It is available in various standard sizes to comply with ENATS specifications for electrical cable protection and has been certified by the BBA. Benefits include flexibility, durability, and compliance with industry standards for electrical utilities. The document also lists available Ridgiduct products and specifications.
Wolf ATEX Turbolites - Spec Sheet
The ATEX Turbolite is a high-powered compressed air lamp that meets European and American safety standards for use in explosive atmospheres. It provides illumination for hazardous industrial activities like tank cleaning and pipeline work. Models include area lights and flood lights available in aluminum or brass housings. The lamp is powered by a turbine driven by compressed air, which generates electricity to power a halogen bulb. It has improvements like sealed bearings and stainless steel components for greater reliability.
ATEX Mobile Phones - Hazardous Area (Zone 1 Zone 21) & Intrinsically Safe - ...
ATEX Mobile Phones - Hazardous Area (Zone 1 Zone 21) & Intrinsically Safe - ...Thorne & Derrick International
This document provides safety instructions and technical specifications for the Ex-Handy 06 explosion-protected mobile phone. It details safety precautions that must be followed when using the device in hazardous areas, including only changing the battery and charging outside the explosive area. The technical data provided includes approval for Zone 1 and 21 hazardous areas. It also gives instructions for commissioning the device, changing the battery, and charging safely.ABB Contactors - 4 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Contactors - 4 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Extended Product Type:
ABB AF09-40-00-11
ABB Product ID:
1SBL137201R1100
EAN: 3471523115019
ABB Catalogue Description:
ABB 4 Pole Contactors : AF09-40-00-11 24-60V50/60HZ 20-60VDC Contactor
ABB AF09 4-pole contactors are used for controlling power circuits up to 690 V AC and 440 V DC. ABB AF09 contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...). ABB AF09 contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. ABB AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. ABB AF contactors have built-in surge protection and do not require additional surge suppressors. The ABB AF... series 4-pole contactors are of the block type design. Main poles and auxiliary contact blocks: 4 N.O. main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: - AF..-..-..-11 not suitable for a direct control by PLC-output. - ABB AF..-..-..-11 type available in some countries: please consult Thorne & Derrick t 00 44 191 4901547
Filoform Cable Joints - Cast Resin Cable Jointing Kits
Filoform Cable Joints - Cast Resin Cable Jointing Kits
Infographic - See How T&D Support & Supply The Rail Industry
Infographic - See How T&D Support & Supply The Rail Industry
Ecom Ex-HSPA 08 LWP - ATEX Hazardous Area Mobile Phone - Data Sheet
This document provides information on an intrinsically safe mobile phone called the Ex-HSPA 08. It lists the phone's functions such as 3G connectivity, Bluetooth, NFC, push-to-talk, and office applications. It also describes accessories like batteries, chargers, cases, mounts, and headsets that are compatible with the phone. The document discusses lone worker protection functionality that allows the phone to trigger alarms and share location if a worker encounters an emergency. It outlines basic and system modes for emergency response.
3M 8428-24 Cold Shrink Tube
3M Cold Shrink Tubes Seal, Splice & Protect LV Power Cables
3M Cold Shrink Tube 8428-243M 8428-24 Cold Shrink Tube
Cold Shrink Tube Min Diameter 24.0mm
Cold Shrink Tube Max Diameter 49.3mm
Cold Shrink Tube Length 609mm
3M Cold Shrink Tube is a pre-stretched EPDM rubber tubing, factory expanded and assembled onto a removable core.
•Cold shrink provides a constant radial pressure seal
•No heat required with 3M Cold Shrink - 100% cold applied
•No specialist cable jointing or heat shrink tools required
•Quality - long term reliability
•Moisture resistant for submersible and outdoor applications
3M Cold Shrink Tubes are suitable for cable protection and moisture ingress protection - 3M Cold Shrink EPDM tubings are suitable as primary insulation on low voltage cables and cable splices up to 1000v AC. Cold shrink tubes provide electrical protection and moisture sealing for high-voltage, air-insulated connectors and cable lugs such as spacer cable and cable lug connections to bus bar. 3M cold shrink tubes also provide electrical insulation of secondary splices including copper or aluminium connectors.
8443-6.5 3M Silicone Rubber Cold Shrink Insulators
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-6.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 132mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
Ecom Instruments Hazardous Area Atex Mobile Devices - Phones, Laptops, Radios...
Ecom Instruments Hazardous Area Atex Mobile Devices - Phones, Laptops, Radios...Thorne & Derrick International
This document summarizes ecom, a company that specializes in intrinsically safe mobile devices for use in hazardous environments. Ecom prides itself on German engineering and safety, developing explosion-protected mobile phones and PDAs. As a pioneer in the industry since 1986, ecom works closely with customers to develop customized solutions for industries like oil, gas, and chemicals. Ecom has a global network of partners and aims to maintain the highest safety and quality standards.Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubes 3M
3M 8427-12 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
8447-3.2 3M Silicone Rubber Cold Shrink Insulators
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8447-3.2 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 14mm
Maximum diameter seal 24.13mm
Cold shrink tube length 57mm
No tools or heat shrink gas torches required for installation of 3M cold shrink
Seals tight, retains resilience and pressure even after aging and exposure
Moisture resistant 3M silicone cold shrink
Cold shrink resists acids and alkalies
Resists ozone and UV ultraviolet light
Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube
T&D Gas Detection Article Featured In FS World
The document discusses methane gas detection. It summarizes that the Deepwater Horizon explosion was triggered by a methane bubble escaping from an oil well. Methane is odorless, colorless, and highly flammable, making it dangerous in certain concentrations. It can cause explosions in mining and oil/gas industries. The document then provides details on methane gas properties, detection methods, and safety considerations for methane detection.
3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...
3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...Thorne & Derrick International
This document provides information on 3M medium voltage terminations for JCN and CN cable ranging from 5 kV to 35 kV. It lists various indoor and outdoor termination kits for both 3M's Cold Shrink QT-III and QT-II terminations. The kits contain silicone rubber terminations of different sizes to accommodate different conductor and cable sizes. They are designed for terminating jacketed concentric neutral and concentric neutral power cables.Morgan Marine GRP Roadside Cabinets & Transformer Housings
This document provides specifications for various types of roadside cabinets and transformer housings. It lists the dimensions and features of cabinets in different series, including the TORBAY, SINGLE DOOR HOUSINGS, DOUBLE DOOR HOUSINGS, and TRANSFORMER HOUSINGS series. The cabinets are made of materials like GRP, steel, stainless steel, and aluminum. They can include optional features such as mounting boards, ventilation, insulation, and locking mechanisms. The document also specifies that the cabinets are suited for housing instrumentation, controls, and transformers for uses in industries like utilities and transportation.
Viewers also liked (20)
Star Delta Starters & Isolators 11KW ATEX Certified Zone 1 Hazardous Area Mot...
Star Delta Starters & Isolators 11KW ATEX Certified Zone 1 Hazardous Area Mot...
Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 58 Watt Singl...
Zone 2 Hazardous Area Lighting (ATEX) - Fluorescent Luminaire - 58 Watt Singl...
ABB Contactors - 3 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Contactors - 3 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
Prysmian Mine Master Electrical Cables For Mining Industry
Prysmian Mine Master Electrical Cables For Mining Industry
Polypipe Cable Ducting - Ridgicoil Power Cable Duct
Polypipe Cable Ducting - Ridgicoil Power Cable Duct
ATEX Mobile Phones - Hazardous Area (Zone 1 Zone 21) & Intrinsically Safe - ...
ATEX Mobile Phones - Hazardous Area (Zone 1 Zone 21) & Intrinsically Safe - ...
ABB Contactors - 4 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
ABB Contactors - 4 Pole Contactors ABB AF09 AF09Z (AC DC) Contactors
Filoform Cable Joints - Cast Resin Cable Jointing Kits
Filoform Cable Joints - Cast Resin Cable Jointing Kits
Infographic - See How T&D Support & Supply The Rail Industry
Infographic - See How T&D Support & Supply The Rail Industry
Ecom Ex-HSPA 08 LWP - ATEX Hazardous Area Mobile Phone - Data Sheet
Ecom Ex-HSPA 08 LWP - ATEX Hazardous Area Mobile Phone - Data Sheet
8443-6.5 3M Silicone Rubber Cold Shrink Insulators
8443-6.5 3M Silicone Rubber Cold Shrink Insulators
Ecom Instruments Hazardous Area Atex Mobile Devices - Phones, Laptops, Radios...
Ecom Instruments Hazardous Area Atex Mobile Devices - Phones, Laptops, Radios...
8447-3.2 3M Silicone Rubber Cold Shrink Insulators
8447-3.2 3M Silicone Rubber Cold Shrink Insulators
3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...
3M Medium Voltage Cable Terminations, 5kV–46kV, 2013 Electrical Product Catal...
Morgan Marine GRP Roadside Cabinets & Transformer Housings
Morgan Marine GRP Roadside Cabinets & Transformer Housings
Similar to Ellis Patents VRT+17 Vulcan Stainless Steel Cable Cleats
Ellis Patents - Cable Cleats, Cable Clamps & Cable Straps
T&D distribute Ellis Patents cable cleats providing safety critical support to vital cable circuits. Cable cleats must withstand peak short circuit forces generated by the actual cable installation - Ellis Patents 3rd party certified cable cleats provide peace of mind containment of low and high voltage cables.
Ellis Patents are global leaders in the innovation and manufacture of nylon, aluminium and stainless steel cable cleats - EP satisfy the operational requirements of the construction, oil, gas, rail, utilities, wind energy and power generation industries.
Holding Power is Ellis Patents guarantee that EP Cable Cleats will contain dangerous short circuit forces - protecting your people, power and plant. Without fail - specify Ellis Patents Cable Cleats.
Alpha cable cleats contain single core power cables in trefoil formation - lightweight, fast to install, strong and robust with unique design providing labour savings. Short circuit withstand test : 31.4kA RMS (72.4kA peak).
Vulcan cable cleats for single, trefoil, quadrafoil and bundled cable installations - suits LV, 11kV-33kV BS6622 and BS7870 Triplex high voltage cables.
Made from stainless steel for non corrosive, high strength and permanent utility cable cleating with compact design.
Ellis Patents are a leading voice in the campaign to have cable cleats reclassified as short-circuit protection devices. A move that would mean cable cleats would be placed on a parallel with fuses and circuit breakers. "This reclassification makes absolute sense. In the event of a cable fault, the forces between cables reach their peak in the first quarter cycle, which is the point that cable cleats earn their crust. In contrast, circuit breakers typically interrupt the fault after 3 or even 5 cycles by which time, if the cable cleats are underspecified, the cables will no longer be secure, but will be putting vital electrical installations and lives at unnecessary risk," says Paul Nolan UK Sales Manager, EP.
Ellis Patents Cable Cleats - General Catalogue
This document provides information about electrical cable cleats manufactured by Ellis Patents. It includes details on various cleat models suitable for different cable and short circuit force applications. The Emperor and Vulcan+ cleats are made of stainless steel and are tested to withstand the highest short circuit forces. The Alpha cleats are made of extruded aluminum and are a robust alternative to traditional aluminum cleats. The document provides specifications, maximum short circuit test levels, recommended cleat spacing and weight for each cleat model suited for trefoil, single or quad cable configurations. It also shares information on testing standards and applications where Ellis cleats are used including rail links, nuclear plants and oil rigs.
Ellis Cable Cleats Catalogue
This document provides information about cable cleats manufactured by Ellis Patents, including their testing procedures, product ranges, and specifications. Key points:
- Ellis Patents tests their cable cleats extensively according to international standards to prove they can withstand short-circuit forces and protect cables.
- They offer various cleat models suited to different cable and short-circuit load requirements, including the Emperor, Vulcan+, and Alpha cleats.
- Product information includes technical specifications, approved cable diameter ranges, short-circuit test levels, materials, and fixing details for each cleat model.
- Ellis Patents prides itself on innovation, precision engineering, and developing solutions tailored to customers' cabling environments globally
Ellis Patents Electrical Product Catalogue - Ellis Patents Cable Cleats
Ellis Patents Electrical Product Catalogue - Ellis Patents Cable CleatsThorne & Derrick International
This document is an electrical product catalogue from Ellis that summarizes their cable cleat products. It introduces the Alpha cable cleats which are a new stronger alternative to traditional aluminum cleats. It also describes the Emperor cable cleats which are made of stainless steel and can withstand the highest levels of short circuit. Additionally, it provides information on the Vulcan+ cable cleats which have a compact design and can withstand moderate short circuit levels. Tables are included with specifications on various cleat models.Ellis Patents Emperor Cable Cleats
The Emperor range of stainless steel cable cleats:
- Offer ultimate protection against harsh conditions through their unique design and stainless steel construction.
- Come in multiple sizes to suit different cable diameters and configurations, with integral insulation to protect cables during short circuits.
- Provide guidance on cleat spacing and maximum short circuit test levels depending on the cleat model.
Ellis Patents Emperor Trefoil ER30-35 - Cleat For Cables 30mm-35mm
The document provides specifications for Emperor Cable Cleats for trefoil cable applications. It includes a selection table with cable range sizes and dimensions for different cleat models. It also specifies that the cleats are made of 316L stainless steel and secured using M12 set screws, nuts, and nylon/LSF polymeric parts. Testing information shows the cleats passed short circuit withstand, temperature, flame, and load tests according to industry standards.
Ellis Patents Emperor Trefoil ER51-58 - Cleat For Cables 51mm-58mm
The document provides specifications for Emperor Cable Cleats used to secure cables. It includes a selection table with cable range sizes and dimensions for different cleat models. It also details testing information showing the cleats passed classifications for short circuit withstand, temperature range, flame resistance and load tests. Material data sheets and additional information are available upon request.
Ellis Patents Emperor Trefoil ER67-74 - Cleat For Cables 67mm-74mm
The document provides specifications for Emperor Cable Cleats used to secure cables. It includes a selection table with cable range sizes and dimensions for different cleat models. It also details testing information showing the cleats passed classifications for short circuit withstand, temperature range, flame resistance and load tests. Material data sheets and additional information are available upon request.
Ellis Patents Emperor Trefoil ER59-66 - Cleat For Cables 59mm-66mm
The document provides specifications for Emperor Cable Cleats for trefoil cable applications. It includes a selection table with cable range sizes and dimensions for different cleat models. It also specifies that the cleats are made of 316L stainless steel and secured using M12 set screws, nuts, and nylon/LSF polymeric parts. Testing information shows the cleats passed short circuit withstand, temperature, flame, and load tests according to industry standards.
Ellis Patents Emperor Trefoil ER111-119 - Cleat For Cables 111 to 119mm
Ellis Patents Emperor Trefoil ER111-119 - Cleat For Cables 111 to 119mm Thorne & Derrick International
The document provides specifications for Emperor Cable Cleats for trefoil cable applications. It includes a selection table with cable range sizes and dimensions for different cleat models. It also specifies that the cleats are made of 316L stainless steel and secured using M12 set screws, nuts, and nylon/LSF polymeric parts. Testing information shows the cleats passed short circuit withstand, temperature, flame, and load tests according to industry standards.Ellis Patents Emperor Trefoil ER40-46 - Cleat For Cables 40mm-46mm
The document provides specifications for Emperor Cable Cleats for trefoil cable applications. It includes a selection table with cable range sizes and dimensions for different cleat models. It also specifies that the cleats are made of 316L stainless steel and secured using M12 set screws, nuts, and nylon/LSF polymeric parts. Testing information shows the cleats passed short circuit withstand, temperature, flame, and load tests according to industry standards.
Similar to Ellis Patents VRT+17 Vulcan Stainless Steel Cable Cleats (11)
Ellis Patents - Cable Cleats, Cable Clamps & Cable Straps
Ellis Patents - Cable Cleats, Cable Clamps & Cable Straps
Ellis Patents Electrical Product Catalogue - Ellis Patents Cable Cleats
Ellis Patents Electrical Product Catalogue - Ellis Patents Cable Cleats
Ellis Patents Emperor Trefoil ER30-35 - Cleat For Cables 30mm-35mm
Ellis Patents Emperor Trefoil ER30-35 - Cleat For Cables 30mm-35mm
Ellis Patents Emperor Trefoil ER51-58 - Cleat For Cables 51mm-58mm
Ellis Patents Emperor Trefoil ER51-58 - Cleat For Cables 51mm-58mm
Ellis Patents Emperor Trefoil ER67-74 - Cleat For Cables 67mm-74mm
Ellis Patents Emperor Trefoil ER67-74 - Cleat For Cables 67mm-74mm
Ellis Patents Emperor Trefoil ER59-66 - Cleat For Cables 59mm-66mm
Ellis Patents Emperor Trefoil ER59-66 - Cleat For Cables 59mm-66mm
Ellis Patents Emperor Trefoil ER111-119 - Cleat For Cables 111 to 119mm
Ellis Patents Emperor Trefoil ER111-119 - Cleat For Cables 111 to 119mm
Ellis Patents Emperor Trefoil ER40-46 - Cleat For Cables 40mm-46mm
Ellis Patents Emperor Trefoil ER40-46 - Cleat For Cables 40mm-46mm
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Gursev Pirge, PhD
Senior Data Scientist - JohnSnowLabs
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Recently uploaded (20)
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Harnessing the Power of NLP and Knowledge Graphs for Opioid Research
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Ellis Patents VRT+17 Vulcan Stainless Steel Cable Cleats
- 1. * Material Data Sheet MDS01 is available upon request. Issue 06 22/08/2011 Page 1 of 3 Vulcan + Range-Taking Cable Cleat Data Sheet To protect and cushion the cables during short circuit conditions, the cleat comes with an integral Low Smoke & Fume Zero Halogen Polymeric liner and removable base pad (MDS01 Data Sheet*). Vulcan + cable cleats are available for trefoil, single, quad and bundled cable applications where moderate levels of short circuit withstand are required. The unique patented compact design allows easy installation where space is limited. Manufactured in type 316L stainless steel , they offer ultimate protection against the harshest environmental conditions. The cleats are supplied with an M10 stainless steel clamping bolt, an M10 stainless steel Flange nut and a Low Smoke & Fume Zero Halogen Polymeric Head Retainer (MDS01 Data Sheet*). UK Patent GB 236 1029 Recommended fixing methods include using either one or two M10 bolts (available as extras). A ProTect Intermediate Strap (details from Ellis Patents) can be fitted between wider spaced cleats for more economical installation. WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK
- 2. Selection Table for Trefoil & Single Application VRT+00 19 24 30 42 60 93 54 n/a 1 x M10 251 VRT+01 23 28 38 50 63 98 54 n/a 1 x M10 258 VRT+02 27 32 43 58 72 106 54 n/a 1 x M10 269 VRT+03 30 35 49 64 79 112 54 n/a 1 x M10 279 VRT+04 33 38 55 70 85 118 54 n/a 1 x M10 284 VRT+05 36 42 58 75 96 125 54 n/a 1 x M10 319 VRT+06 40 46 63 84 105 133 54 n/a 1 x M10 331 VRT+07 44 50 73 90 112 140 54 n/a 1 x M10 391 VRT+08 48 55 83 100 121 149 54 n/a 1 x M10 405 VRT+09 51 58 86 104 126 154 54 n/a 1 x M10 411 VRT+10 55 62 88 110 134 162 54 50 3 x M10 442 VRT+11 59 66 90 115 143 170 54 50 3 x M10 453 VRT+12 63 70 100 125 152 177 54 50 3 x M10 460 VRT+13 67 74 107 132 161 185 54 75 3 x M10 524 VRT+14 71 78 120 145 169 192 54 75 3 x M10 536 VRT+15 74 82 125 150 176 199 54 75 3 x M10 542 VRT+16 77 85 132 153 183 205 54 75 3 x M10 544 VRT+17 81 89 136 156 190 216 54 75 3 x M10 618 VRT+18 85 93 139 159 200 225 54 75 3 x M10 628 VRT+19 89 97 142 162 200 235 54 75 3 x M10 637 VRT+20 93 101 150 170 215 240 54 75 3 x M10 646 Selection Table for Quad Cable Application W(max) mm H(max) mm D mm P mm Base Holes VRQ+01 68 110 54 n/a 1 x M10 284 VRQ+02 70 113 54 n/a 1 x M10 286 VRQ+03 80 128 54 n/a 1 x M10 318 VRQ+04 103 148 54 n/a 1 x M10 378 VRQ+05 120 165 54 n/a 1 x M10 452 VRQ+06 121 170 54 n/a 1 x M10 467 VRQ+07 140 190 54 50 3 x M10 486 VRQ+08 150 200 54 50 3 x M10 499 VRQ+09 170 218 54 75 3 x M10 581 Issue 06 22/08/2011 Page 2 of 3 26 28 33 27 32 42 Part No Trefoil Cable Range Max Dia. mm 25 Min Dia. mm Min Dia. Mm 23 Dimensions W(max) mm H(max) mm P mm Base Holes Weight g D mm Quad Cable Range Dimensions Part No Weight g 43 48 51 58 64 47 50 57 63 70 Single Cable Range Min Dia. mm Max Dia. mm Max Dia. mm WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK
- 3. Testing Information VRT+06 4CG8 VRQ+03 4CG8 Issue 06 22/08/2011 Page 3 of 3 Refer to Ellis Patents for further details. Refer to Ellis Patents for further details. -40 to 60 >120 Vulcan + Single Test Data - Pass Temperature for Permanent Application Needle Flame o C Application Time (seconds) Vulcan + Trefoil Test Data - Pass 132 (Peak) (Report No. PDL- 06.037.1) 104 (Peak) (Report No. PDL- 07.161.2.1) -40 to 60 >120 6.2 10.0, 10.1 Properties IEC 61914:2009 Classification Clause Units / Classification Lateral Load Test 9.3 Newtons (N) 3000 5830 Vulcan + Cleats have been tested in line with the International Standard of 'Cable Cleats for for Electrical Installations' IEC 61914:2009. Typical Results are detailed below: Resistance to Electro Mechanical Force (Undertaken at Damstra Laboratories NL) 6.4, 6.4.4, 9.5 Cleat Type 6.1, 6.1.3 Composite kA @ 600mm Centres M10 Fixings (Withstanding more than one short circuit) Impact Resistance 6.3, 6.3.5, 9.2 Very Heavy Classification (5.0kg @ 400mm) Resistance to Electro Mechanical Force (Undertaken at Damstra Laboratories NL) 6.4, 6.4.3, 9.5 American Bureau of Shipping Type Approval Vulcan VRT+ Cable Cleats are compliant with the requirements of London Underground Standard 1-085. Product Register No. 361 Axial Load Test 9.4 Newtons (N) 1000 280 kA @ 300mm Centres M10 Fixings (Withstanding one short circuit) WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK