This chapter discusses basic procedures for booting the system. It instructs the user to connect the system by referring to Chapter 4 for connection details and cautions that laser pumping or marking cannot start unless connections 1.2.3.4.10.11.12.13 are completed. It also directs the user to refer to the External Control Manual Chapter 3 for control details from the terminal block and I/O connectors. It notes that connection methods vary slightly by configuration and instructs the user to observe the instructions in Chapter 5 for installation details. It then instructs the user to turn on the main switch on the rear of the controller to power up the system.
OUR TECHNOLOGY HAS RISEN TO levels of great potential and power. Customers are able to choose exactly what parameters they want to control. Ammonia, wind direction, humidity, temperature, C02, light, curtain, ventilation, natural tunnel, transversal, silo wieght, water level and seeing the pictures much more.
OUR TECHNOLOGY HAS RISEN TO levels of great potential and power. Customers are able to choose exactly what parameters they want to control. Ammonia, wind direction, humidity, temperature, C02, light, curtain, ventilation, natural tunnel, transversal, silo wieght, water level and seeing the pictures much more.
BuzzBase is the first content distribution platform with full focus on Social Media. BuzzBase gives real Social Media Influencers a chance to earn money by sharing content and creating buzz around it.
De Reis van de Heldin April 2015. Verhalen van vrouwelijke professionals die met hun passie hun geld willen verdienen. Heb jij interesse om deel te nemen aan één van de komende edities mail mij naar peterdekuster@hotmail.nl voor de voorwaarden. Peter
BuzzBase is the first content distribution platform with full focus on Social Media. BuzzBase gives real Social Media Influencers a chance to earn money by sharing content and creating buzz around it.
De Reis van de Heldin April 2015. Verhalen van vrouwelijke professionals die met hun passie hun geld willen verdienen. Heb jij interesse om deel te nemen aan één van de komende edities mail mij naar peterdekuster@hotmail.nl voor de voorwaarden. Peter
1. CHAPTER 6 BASIC PROCEDURES
6-1 Method of booting system
Connectio Proceed the connections for booting this system by
referring
n
to “Chapter 4 Connections” and by confirming its
contents. CAUTION Laser pumping or marking
cannot be started
unless the connections to Terminal base
1.2.3.4.10.11.12.13 are done.
Refer to External Control Manual
"Chapter 3
Control from terminal block and I/O
connectors"
for the details of the connections.
TO CONSOLE
The connection method varies slightly
from
configuration to configuration (The
REFERENCE
connection shown in the figure above is
for the case where
a console is used). Observe
instructions given in “Chapter 5
Installation”.
MAIN SWITCH ON Turn on the Main switch on the rear of the
controller.
→ The main power source indicator is lit green.
6-1
