This document summarizes the specifications of a 25G 1563.86nm 10km DWDM SFP28 transceiver (DWDM-SFP25G-10-C17-T02) produced by Guilin GLsun Science and Tech Group Co., LTD. It includes details on the product features, functional diagram, optical and electrical characteristics, pin descriptions, ordering information, and digital diagnostic specifications. The transceiver supports 25.78Gb/s data rates, has a duplex LC connector, and is designed for single-mode fiber with a maximum distance of 10km.
This document provides the product specification for a 10Gbps 1330nm DFB/LD (Distributed Feedback Laser Diode) made by Guilin GLsun Science and Tech Group Co., LTD. It includes details on features, applications, maximum ratings, electrical and optical characteristics, outline drawings, pin connections, and precautions for use. Key specifications listed are a data rate up to 10Gbps, a center wavelength of 1330nm, and an optical output power of 7-9mW at a threshold current plus 20mA.
This document provides the product specification for a 10Gbps 1310nm DFB/LD (Distributed Feedback Laser Diode) made by Guilin GLsun Science and Tech Group Co., LTD. Key details include its data rate of up to 10Gbps, emission wavelength of 1310nm, TO56 package, and electrical and optical characteristics such as threshold current, optical output power, and center wavelength. Precautions for use include proper grounding and soldering to prevent static discharge or overheating.
This document provides product specifications for a 2.5Gbps 1310nm DFB/LD (Distributed Feedback Laser Diode) from Guilin GLsun Science and Tech Group Co. Key details include:
- Model XTD-405C-4206E operates at 1310nm wavelength up to 2.5Gbps data rate with good high temperature characteristics.
- Electrical and optical characteristics are provided such as threshold current, optical output power, slope efficiency, center wavelength, and operating voltage.
- Precautions for safe handling during soldering and use are listed to prevent damage from electrostatic discharge, overheating, or electric shock.
This document provides the product specification for a 2x4 optical switch from Guilin GLsun Science and Tech Group Co. It includes details on the switch's features such as wide wavelength range and low crosstalk. Specifications covered are insertion loss, return loss, crosstalk, power supply requirements, and dimensions. The document also provides pin configurations, switch status truth tables, optical routing diagrams, and ordering information.
This document provides the product specification for a 1x16 cascade optical switch (model SUN-OSW-1x16-SM-L-1310/1550-90-05-LP) produced by Guilin GLsun Science and Tech Group Co. The switch has 16 input/output ports, wide wavelength range, low crosstalk and insertion loss, high stability and reliability, and is suited for applications such as OADM, OXC, and system monitoring. Key specifications of the switch including wavelength range, insertion loss, crosstalk, switching time and environmental tolerances are outlined.
This document provides specifications for the SUN-OSW-1×8-SM-1315-90-05-LP-23-U 1x8 optical switch including its features, applications, specifications, pin configurations, channel selection, optical route, timing diagram, and dimension details. It has low loss and high reliability, supports parallel and serial interfaces, and is used in applications such as ring networks and remote monitoring in optical networks.
This document provides product specifications for a MEMS optical switch called SUN-MS-S1-1x8-SM-A-1315-90-05-LP-TTL. It has an insertion loss between 0.6-1.0 dB for wavelengths between 1260-1650 nm, a switching time of less than 30 ms, and supports over 109 switching cycles. The switch uses MEMS technology, has a small package size, and high stability. It can be used in DWDM networks, channel monitoring, and laboratory R&D applications.
This document provides the product specification for a MEMS 8x8 optical switch module. The switch uses MEMS mirror technology to allow any input to connect to any output. Key specifications include an insertion loss between 1.5-2.0 dB, a switching speed of less than 50 ms, an operating temperature range of -10 to 70 degrees C, and dimensions of 120x100x15mm. The module has 8 input and 8 output single-mode fibers with LC connectors and is controlled via an I2C or UART interface.
This document provides the product specification for a 10Gbps 1330nm DFB/LD (Distributed Feedback Laser Diode) made by Guilin GLsun Science and Tech Group Co., LTD. It includes details on features, applications, maximum ratings, electrical and optical characteristics, outline drawings, pin connections, and precautions for use. Key specifications listed are a data rate up to 10Gbps, a center wavelength of 1330nm, and an optical output power of 7-9mW at a threshold current plus 20mA.
This document provides the product specification for a 10Gbps 1310nm DFB/LD (Distributed Feedback Laser Diode) made by Guilin GLsun Science and Tech Group Co., LTD. Key details include its data rate of up to 10Gbps, emission wavelength of 1310nm, TO56 package, and electrical and optical characteristics such as threshold current, optical output power, and center wavelength. Precautions for use include proper grounding and soldering to prevent static discharge or overheating.
This document provides product specifications for a 2.5Gbps 1310nm DFB/LD (Distributed Feedback Laser Diode) from Guilin GLsun Science and Tech Group Co. Key details include:
- Model XTD-405C-4206E operates at 1310nm wavelength up to 2.5Gbps data rate with good high temperature characteristics.
- Electrical and optical characteristics are provided such as threshold current, optical output power, slope efficiency, center wavelength, and operating voltage.
- Precautions for safe handling during soldering and use are listed to prevent damage from electrostatic discharge, overheating, or electric shock.
This document provides the product specification for a 2x4 optical switch from Guilin GLsun Science and Tech Group Co. It includes details on the switch's features such as wide wavelength range and low crosstalk. Specifications covered are insertion loss, return loss, crosstalk, power supply requirements, and dimensions. The document also provides pin configurations, switch status truth tables, optical routing diagrams, and ordering information.
This document provides the product specification for a 1x16 cascade optical switch (model SUN-OSW-1x16-SM-L-1310/1550-90-05-LP) produced by Guilin GLsun Science and Tech Group Co. The switch has 16 input/output ports, wide wavelength range, low crosstalk and insertion loss, high stability and reliability, and is suited for applications such as OADM, OXC, and system monitoring. Key specifications of the switch including wavelength range, insertion loss, crosstalk, switching time and environmental tolerances are outlined.
This document provides specifications for the SUN-OSW-1×8-SM-1315-90-05-LP-23-U 1x8 optical switch including its features, applications, specifications, pin configurations, channel selection, optical route, timing diagram, and dimension details. It has low loss and high reliability, supports parallel and serial interfaces, and is used in applications such as ring networks and remote monitoring in optical networks.
This document provides product specifications for a MEMS optical switch called SUN-MS-S1-1x8-SM-A-1315-90-05-LP-TTL. It has an insertion loss between 0.6-1.0 dB for wavelengths between 1260-1650 nm, a switching time of less than 30 ms, and supports over 109 switching cycles. The switch uses MEMS technology, has a small package size, and high stability. It can be used in DWDM networks, channel monitoring, and laboratory R&D applications.
This document provides the product specification for a MEMS 8x8 optical switch module. The switch uses MEMS mirror technology to allow any input to connect to any output. Key specifications include an insertion loss between 1.5-2.0 dB, a switching speed of less than 50 ms, an operating temperature range of -10 to 70 degrees C, and dimensions of 120x100x15mm. The module has 8 input and 8 output single-mode fibers with LC connectors and is controlled via an I2C or UART interface.
This document provides product specifications for the SUN-FSW-2x2B-SM-5-L-1310/1550-90-05-LP optical micro switch. Key specifications include a wavelength range of 1260-1650nm, insertion loss less than 0.8dB, return loss greater than 50dB, crosstalk greater than 55dB, switching time less than 8ms, and over 10 million switching cycles. The switch has 4 optical ports and 10 electrical pins, operates at 5V, and measures 27x12.6x8.2mm. It is used in applications such as optical add-drop multiplexers, network monitoring, and laboratory research.
This document provides product specifications for a micro optical switch (Model SUN-FSW-2x2A-SM-5-L-1310/1550-90-05-LP) made by Guilin GLsun Science and Tech Group Co., LTD. It includes features such as low insertion loss, wide wavelength range, low crosstalk, and high stability. Specifications for parameters like wavelength range, insertion loss, return loss, and crosstalk are provided. It also details pin configurations, electrical specifications, ordering information, and notes.
This document provides product specifications for the SUN-FSW-1x2H-SM-5-L-1310/1550-90-05-LP optical micro switch from Guilin GLsun Science and Tech Group Co. Key details include:
- The switch has a wavelength range of 1260-1650nm, insertion loss of 0.8dB max, return loss of 50dB min, and crosstalk of 55dB min.
- It supports voltages of 3V or 5V, has a switching time of 8ms max, and durability of over 10 million cycles.
- Applications include R&D, system monitoring, OADM, and MAN networks.
This document provides product specifications for the SUN-FSW-1x2-SM-5-L-1310/1550-90-05-LP 1x2 optical switch from Guilin GLsun Science and Tech Group Co. The switch has low insertion loss between 0.6-1.2 dB, high return loss and crosstalk above 35/50 dB, and can switch between two optical paths in under 8 ms with over 10 million cycles of durability. It operates with 3V or 5V and has an operating temperature range of -20 to 70 degrees Celsius.
This document provides product specifications for the SUN-FSW-1x1-SM-5-L-1310/1550-90-05-LP 1x1 micro optical switch from Guilin GLsun Science and Tech Group Co. The switch has low insertion loss between 0.4-0.8 dB, high return loss of 50 dB or more, crosstalk of 70 dB or more, and can switch signals between 850nm and 1650nm. It operates at 5V with switching time under 8ms and over 10 million durability cycles. The switch measures 27x12.6x8.2mm and has an LC/APC connector with 0.5m fiber length.
This document provides the product specification for an optical link selector made by Guilin GLsun Science and Tech Group Co., LTD. The optical link selector has 16 input channels and 2 output channels, supports wavelengths of 1310nm and 1550nm, has an insertion loss of 0.6dB or less, and can automatically switch between optical links. It is used for applications such as optical transmission system monitoring, optical fiber testing, and data security monitoring. The selector has features such as low loss, fast switching, dual power supplies, an LED display, and remote management via WEB and SNMP.
This document provides the product specification for a SUN-D1×32-SM-1310/1550-AC-FP-1-2U Rack D1×32 Optical Switch made by Guilin GLsun Science and Tech Group Co., LTD. It has low insertion loss and fast switching time, supports RS232 and Ethernet remote control, and is used for fiber monitoring, light source selection, and optical path protection in fiber transmission systems. Key specifications include a wavelength range of 850±40/1300±40nm or 1260-1650nm, return loss over 45dB, crosstalk over 55dB, and a switching time of less than 10ms.
This document provides product specifications for a 1x64 rack-mounted optical switch (model SUN-1×64-SM-1310/1550-AC-FP-2U) manufactured by Guilin GLsun Science and Tech Group Co., LTD. The switch has low insertion loss and fast switching time, supports RS232 and Ethernet control, and is used in applications like FITL, automatic measurement, optical network monitoring, and cable maintenance. Key specifications include an insertion loss of 1.0dB maximum, support for multimode fiber with a 62.5/125μm core/cladding, over 10 million switching cycles, and operation from -5°C to 55°C.
This document provides specifications for the SUN-OSW-1~8-SM-13/15-LP N-1 x 1 optical switch from Guilin GLsun Science and Tech Group Co. Key details include:
- It is a 1U rackmount optical switch with up to 40 channels, a wavelength range of 1260-1650nm and insertion loss less than 0.8dB.
- Features include low insertion loss, hot backup power supply, LED display, transparent signal transmission, and multi-channel spare.
- Interface options include RJ45, USB, and dual AC or DC power supplies. Operating temperature range is -5 to 55°C.
This document provides product specifications for a 1U rack-mounted 1x8 optical switch (model SUN-D1×8-SM-1310/1550-AC-FP-1-1U) manufactured by Guilin GLsun Science and Tech Group Co., LTD. The switch has low insertion loss below 1.2 dB, supports wavelengths from 850-1650nm, and can be controlled via an RS232 port, Ethernet, or manually from the front panel. It is used for applications such as fiber monitoring, light source selection, optical fiber path protection, and testing.
This document provides product specifications for a 1U-1x16 optical switch made by Guilin GLsun Science and Tech Group Co., LTD. The switch has 16 input ports and 1 output port, low insertion loss below 1.2 dB, a wavelength range of 850±40/1300±40 or 1260-1650 nm, and switching time of less than 10 ms. It is used for applications such as FITL, automatic measurement, optical network monitoring, and cable maintenance. The specifications include technical parameters, optical route, ordering information, and notes.
This document provides product specifications for a 1U rack-mounted 1x8 optical switch (model SUN-1×8-SM-1310/1550-AC-FP-1U) manufactured by Guilin GLsun Science and Tech Group Co., LTD. The switch has low insertion loss and fast switching time, supports RS232 and Ethernet control, and is used in applications like FITL, automatic measurement, and optical network monitoring. Key specifications include an insertion loss below 1.2 dB, return loss above 45 dB, crosstalk above 55 dB, and support for wavelengths between 850nm-1650nm.
This document provides product specifications for the SM-SU-SU-S-3M-J01 fiber patch cable. Key details include:
- The cable has SC connectors on both ends, is 3 meters long, single mode, OS2 fiber, and has a 2.0mm diameter.
- Performance metrics include an insertion loss of less than 0.35dB and return loss of greater than 50dB for PC and 60dB for APC connectors.
- The cable operates between -40 to +75°C and stores between -40 to +85°C.
This document provides product specifications for the SM-SU-SU-D-2M-J01 fiber patch cable. It lists technical requirements, parameters, and values for the fiber and cable characteristics including fiber type, connectors, insertion loss, return loss, operating temperature range, durability, optical fiber mechanical properties, optical cable mechanical properties, temperature characteristics, and storage requirements. The document also provides ordering information and identifies the part number.
This document provides product specifications for a 2m fiber optic patch cable with SC connectors on both ends. Key details include:
- Fiber type is single mode OS2, connectors are SC, ROHS compliant
- Maximum insertion loss is 0.35dB, return loss is ≥50dB for PC and ≥60dB for APC
- Operating temperature range is -40°C to +75°C, storage is -40°C to +85°C
- Optical and mechanical specifications for the fiber and cable meet relevant standards
- Cables should be stored at room temperature in a clean, dry place protected from direct sunlight
This document provides specifications for GLsun's XFP-10G-ZR100-55-T02 small form factor 10Gb/s transceiver. It supports data rates of 9.95 to 11.3Gb/s over 100km single mode fiber, complies with the XFP MSA, and includes digital diagnostics. Key features include a 1550nm laser, APD detector, operating temperature range of 0 to 70°C, and low power consumption under 3.5W. Pinouts, interface details, and ordering information are also included.
This document describes the XFP-10G-ZR-55-T02 10G 1550nm 80km ZR XFP transceiver from Guilin GLsun Science and Tech Group Co. It supports data rates from 9.95 to 11.3 Gb/s over 80km single mode fiber and complies with various 10G Ethernet, Fibre Channel and OTN standards. The transceiver uses a cooled 1550nm EML laser and APD photodetector with an operating temperature range of 0 to 70°C or -40 to 85°C and digital diagnostics interface.
This document provides specifications for the XFP-10G-SR-T01 10G 850nm 300m SR XFP transceiver made by Guilin GLsun Science and Tech Group Co. It includes details on the product description, features, regulatory compliance, electrical and optical characteristics, pin descriptions, mechanical specifications, EEPROM information, and ordering information. The transceiver supports 10Gb Ethernet up to 300m on OM3 fiber and includes digital diagnostics monitoring via a 2-wire interface.
This document specifies the technical details of a 10G 1310nm 10km LR XFP transceiver module made by Guilin GLsun Science and Tech Group Co., LTD. It includes specifications for the optical and electrical characteristics, pin descriptions, management interface details, and ordering information for commercial and industrial temperature range modules. The module supports data rates of 9.95 to 11.3 Gb/s and has an operating wavelength of 1310nm with a reach of 10km on single mode fiber.
This document summarizes the specifications of the XFP-10G-ER-55-T02 transceiver module. It is an XFP form factor 10Gb/s transceiver that operates at 1550nm and supports transmission distances up to 40km on single mode fiber. The module complies with 10G Ethernet, Fibre Channel and OTN standards. It features an EML laser, PIN photodetector, hot-pluggable design, and digital diagnostics interface. Operating temperature ranges from commercial 0-70°C or extended industrial -40-85°C models.
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
This document provides product specifications for the SUN-FSW-2x2B-SM-5-L-1310/1550-90-05-LP optical micro switch. Key specifications include a wavelength range of 1260-1650nm, insertion loss less than 0.8dB, return loss greater than 50dB, crosstalk greater than 55dB, switching time less than 8ms, and over 10 million switching cycles. The switch has 4 optical ports and 10 electrical pins, operates at 5V, and measures 27x12.6x8.2mm. It is used in applications such as optical add-drop multiplexers, network monitoring, and laboratory research.
This document provides product specifications for a micro optical switch (Model SUN-FSW-2x2A-SM-5-L-1310/1550-90-05-LP) made by Guilin GLsun Science and Tech Group Co., LTD. It includes features such as low insertion loss, wide wavelength range, low crosstalk, and high stability. Specifications for parameters like wavelength range, insertion loss, return loss, and crosstalk are provided. It also details pin configurations, electrical specifications, ordering information, and notes.
This document provides product specifications for the SUN-FSW-1x2H-SM-5-L-1310/1550-90-05-LP optical micro switch from Guilin GLsun Science and Tech Group Co. Key details include:
- The switch has a wavelength range of 1260-1650nm, insertion loss of 0.8dB max, return loss of 50dB min, and crosstalk of 55dB min.
- It supports voltages of 3V or 5V, has a switching time of 8ms max, and durability of over 10 million cycles.
- Applications include R&D, system monitoring, OADM, and MAN networks.
This document provides product specifications for the SUN-FSW-1x2-SM-5-L-1310/1550-90-05-LP 1x2 optical switch from Guilin GLsun Science and Tech Group Co. The switch has low insertion loss between 0.6-1.2 dB, high return loss and crosstalk above 35/50 dB, and can switch between two optical paths in under 8 ms with over 10 million cycles of durability. It operates with 3V or 5V and has an operating temperature range of -20 to 70 degrees Celsius.
This document provides product specifications for the SUN-FSW-1x1-SM-5-L-1310/1550-90-05-LP 1x1 micro optical switch from Guilin GLsun Science and Tech Group Co. The switch has low insertion loss between 0.4-0.8 dB, high return loss of 50 dB or more, crosstalk of 70 dB or more, and can switch signals between 850nm and 1650nm. It operates at 5V with switching time under 8ms and over 10 million durability cycles. The switch measures 27x12.6x8.2mm and has an LC/APC connector with 0.5m fiber length.
This document provides the product specification for an optical link selector made by Guilin GLsun Science and Tech Group Co., LTD. The optical link selector has 16 input channels and 2 output channels, supports wavelengths of 1310nm and 1550nm, has an insertion loss of 0.6dB or less, and can automatically switch between optical links. It is used for applications such as optical transmission system monitoring, optical fiber testing, and data security monitoring. The selector has features such as low loss, fast switching, dual power supplies, an LED display, and remote management via WEB and SNMP.
This document provides the product specification for a SUN-D1×32-SM-1310/1550-AC-FP-1-2U Rack D1×32 Optical Switch made by Guilin GLsun Science and Tech Group Co., LTD. It has low insertion loss and fast switching time, supports RS232 and Ethernet remote control, and is used for fiber monitoring, light source selection, and optical path protection in fiber transmission systems. Key specifications include a wavelength range of 850±40/1300±40nm or 1260-1650nm, return loss over 45dB, crosstalk over 55dB, and a switching time of less than 10ms.
This document provides product specifications for a 1x64 rack-mounted optical switch (model SUN-1×64-SM-1310/1550-AC-FP-2U) manufactured by Guilin GLsun Science and Tech Group Co., LTD. The switch has low insertion loss and fast switching time, supports RS232 and Ethernet control, and is used in applications like FITL, automatic measurement, optical network monitoring, and cable maintenance. Key specifications include an insertion loss of 1.0dB maximum, support for multimode fiber with a 62.5/125μm core/cladding, over 10 million switching cycles, and operation from -5°C to 55°C.
This document provides specifications for the SUN-OSW-1~8-SM-13/15-LP N-1 x 1 optical switch from Guilin GLsun Science and Tech Group Co. Key details include:
- It is a 1U rackmount optical switch with up to 40 channels, a wavelength range of 1260-1650nm and insertion loss less than 0.8dB.
- Features include low insertion loss, hot backup power supply, LED display, transparent signal transmission, and multi-channel spare.
- Interface options include RJ45, USB, and dual AC or DC power supplies. Operating temperature range is -5 to 55°C.
This document provides product specifications for a 1U rack-mounted 1x8 optical switch (model SUN-D1×8-SM-1310/1550-AC-FP-1-1U) manufactured by Guilin GLsun Science and Tech Group Co., LTD. The switch has low insertion loss below 1.2 dB, supports wavelengths from 850-1650nm, and can be controlled via an RS232 port, Ethernet, or manually from the front panel. It is used for applications such as fiber monitoring, light source selection, optical fiber path protection, and testing.
This document provides product specifications for a 1U-1x16 optical switch made by Guilin GLsun Science and Tech Group Co., LTD. The switch has 16 input ports and 1 output port, low insertion loss below 1.2 dB, a wavelength range of 850±40/1300±40 or 1260-1650 nm, and switching time of less than 10 ms. It is used for applications such as FITL, automatic measurement, optical network monitoring, and cable maintenance. The specifications include technical parameters, optical route, ordering information, and notes.
This document provides product specifications for a 1U rack-mounted 1x8 optical switch (model SUN-1×8-SM-1310/1550-AC-FP-1U) manufactured by Guilin GLsun Science and Tech Group Co., LTD. The switch has low insertion loss and fast switching time, supports RS232 and Ethernet control, and is used in applications like FITL, automatic measurement, and optical network monitoring. Key specifications include an insertion loss below 1.2 dB, return loss above 45 dB, crosstalk above 55 dB, and support for wavelengths between 850nm-1650nm.
This document provides product specifications for the SM-SU-SU-S-3M-J01 fiber patch cable. Key details include:
- The cable has SC connectors on both ends, is 3 meters long, single mode, OS2 fiber, and has a 2.0mm diameter.
- Performance metrics include an insertion loss of less than 0.35dB and return loss of greater than 50dB for PC and 60dB for APC connectors.
- The cable operates between -40 to +75°C and stores between -40 to +85°C.
This document provides product specifications for the SM-SU-SU-D-2M-J01 fiber patch cable. It lists technical requirements, parameters, and values for the fiber and cable characteristics including fiber type, connectors, insertion loss, return loss, operating temperature range, durability, optical fiber mechanical properties, optical cable mechanical properties, temperature characteristics, and storage requirements. The document also provides ordering information and identifies the part number.
This document provides product specifications for a 2m fiber optic patch cable with SC connectors on both ends. Key details include:
- Fiber type is single mode OS2, connectors are SC, ROHS compliant
- Maximum insertion loss is 0.35dB, return loss is ≥50dB for PC and ≥60dB for APC
- Operating temperature range is -40°C to +75°C, storage is -40°C to +85°C
- Optical and mechanical specifications for the fiber and cable meet relevant standards
- Cables should be stored at room temperature in a clean, dry place protected from direct sunlight
This document provides specifications for GLsun's XFP-10G-ZR100-55-T02 small form factor 10Gb/s transceiver. It supports data rates of 9.95 to 11.3Gb/s over 100km single mode fiber, complies with the XFP MSA, and includes digital diagnostics. Key features include a 1550nm laser, APD detector, operating temperature range of 0 to 70°C, and low power consumption under 3.5W. Pinouts, interface details, and ordering information are also included.
This document describes the XFP-10G-ZR-55-T02 10G 1550nm 80km ZR XFP transceiver from Guilin GLsun Science and Tech Group Co. It supports data rates from 9.95 to 11.3 Gb/s over 80km single mode fiber and complies with various 10G Ethernet, Fibre Channel and OTN standards. The transceiver uses a cooled 1550nm EML laser and APD photodetector with an operating temperature range of 0 to 70°C or -40 to 85°C and digital diagnostics interface.
This document provides specifications for the XFP-10G-SR-T01 10G 850nm 300m SR XFP transceiver made by Guilin GLsun Science and Tech Group Co. It includes details on the product description, features, regulatory compliance, electrical and optical characteristics, pin descriptions, mechanical specifications, EEPROM information, and ordering information. The transceiver supports 10Gb Ethernet up to 300m on OM3 fiber and includes digital diagnostics monitoring via a 2-wire interface.
This document specifies the technical details of a 10G 1310nm 10km LR XFP transceiver module made by Guilin GLsun Science and Tech Group Co., LTD. It includes specifications for the optical and electrical characteristics, pin descriptions, management interface details, and ordering information for commercial and industrial temperature range modules. The module supports data rates of 9.95 to 11.3 Gb/s and has an operating wavelength of 1310nm with a reach of 10km on single mode fiber.
This document summarizes the specifications of the XFP-10G-ER-55-T02 transceiver module. It is an XFP form factor 10Gb/s transceiver that operates at 1550nm and supports transmission distances up to 40km on single mode fiber. The module complies with 10G Ethernet, Fibre Channel and OTN standards. It features an EML laser, PIN photodetector, hot-pluggable design, and digital diagnostics interface. Operating temperature ranges from commercial 0-70°C or extended industrial -40-85°C models.
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Letter and Document Automation for Bonterra Impact Management (fka Social Sol...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on automated letter generation for Bonterra Impact Management using Google Workspace or Microsoft 365.
Interested in deploying letter generation automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
1. DWDM-SFP25G-10-C17-T02#131011
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 1 -
25G 1563.86nm 10km DWDM SFP28 Transceiver
Specification Revision Record
Date Version Page Revision Description Prepare Approve
20200730 1.0 Liu YM
All right reserved by Guilin GLsun Science and Tech Group Co., LTD. Without written permission,
any unit or individual can’t reproduce, copy or use it for any commercial purpose.
Product 25G 1563.86nm 10km DWDM SFP28 Transceiver
Model DWDM-SFP25G-10-C17-T02
File No. DWDM-SFP25G-10-C17-T02#131011
Version 1.0
Issuing Date 2020-07-21
- 1 -
2. DWDM-SFP25G-10-C17-T02#131011
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 2 -
Product Description
GLsun's DWDM-SFP25G-10-C17-T02 single-mode transceiver is SFP28 module for duplex optical data
communications support up to 25.78Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability.
Digital diagnostic functions are available via an I C. It has built-in clock and data recovery (CDR). This
module is designed for single-mode fiber.
Product Feature
Duplex LC connector
Hot-pluggable SFP28 footprint C-band cooled EML laser
High performance PIN receiver
RoHS compliant and Lead Free
Distance up to 10km on 9/125um SMF
Metal enclosure for lower EMI
Power dissipation <2.3W
Commercial and Extend operating temperature optional
Applications
25.78 Gb/s single lane
Other optical links
Functional Diagram
4. DWDM-SFP25G-10-C17-T02#131011
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 4 -
Absolute Maximum Ratings
General Operating Characteristics
Parameter Symbol Min Typ Max Unit Note
Data Rate DR 25.78125 Gb/s
Supply Voltage Vcc 3.13 3.3 3.47 V
Supply Current Icc 680 mA
Operating Case Temp.
Tc 0 70
°C
TI -40 85
46 DWDM-SFP25G-10-C46-T02 194.6 1540.56
47 DWDM-SFP25G-10-C47-T02 194.7 1539.77
48 DWDM-SFP25G-10-C48-T02 194.8 1538.98
49 DWDM-SFP25G-10-C49-T02 194.9 1538.19
50 DWDM-SFP25G-10-C50-T02 195.0 1537.40
51 DWDM-SFP25G-10-C51-T02 195.1 1536.61
52 DWDM-SFP25G-10-C52-T02 195.2 1535.82
53 DWDM-SFP25G-10-C53-T02 195.3 1535.04
54 DWDM-SFP25G-10-C54-T02 195.4 1534.25
55 DWDM-SFP25G-10-C55-T02 195.5 1533.47
56 DWDM-SFP25G-10-C56-T02 195.6 1532.68
57 DWDM-SFP25G-10-C57-T02 195.7 1531.90
58 DWDM-SFP25G-10-C58-T02 195.8 1531.12
59 DWDM-SFP25G-10-C59-T02 195.9 1530.33
60 DWDM-SFP25G-10-C60-T02 196.0 1529.55
61 DWDM-SFP25G-10-C61-T02 196.1 1528.77
Parameter Symbol Min Max Unit Note
Supply Voltage Vcc -0.5 4.0 V
Storage Temperature TS -40 85 °C
Relative Humidity RH 0 85 %
5. DWDM-SFP25G-10-C17-T02#131011
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 5 -
Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)
Optical Characteristics (TOP(C) = 0 to 70 °C, TOP(I) =-40 to 85 °C, VCC = 3.13 to 3.47 V)
Parameter Symbol Min Typ Max Unit Note
Transmitter
Differential data input swing VIN,PP 100 800 mVpp
Transmit Disable Voltage VD VCC-0.8 Vcc V
Transmit Enable Voltage VEN Vee Vee+0.8 V
Input differential impedance Rin 100 Ω
Receiver
Differential data output swing Vout,pp 185 425 mVpp
Output rise time and fall time Tr, Tf 28 Ps 1
LOS asserted VLOS_F VCC-0.8 Vcc V 2
LOS de-asserted VLOS_N Vee Vee+0.8 V 2
Notes:
1. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and
four 0’s sequence in the PRBS 9 is an acceptable alternative.
2. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal
operation is logic 0; loss of signal is logic 1.
Parameter Symbol Min Typ Max Unit Note
Transmitter
Center Wavelength λc As per ITU-T 694.1 nm
Center Wavelength (End of Life) λc_EOL λc±100pm
Ave. output power (Enabled) PAVE -3 5 dBm 1
Side-Mode Suppression Ratio SMSR 35 dB
Extinction Ratio ER 3.5 dB
RMS spectral width Δλ 0.4 nm
Rise/Fall time (20%~80%) Tr/Tf 50 ps
Relative Intensity Noise RIN -128 dB/Hz
Receiver
Operating Wavelength λ 1529 1565 nm
6. DWDM-SFP25G-10-C17-T02#131011
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 6 -
EEPROM Information
Pin Descriptions
Receiver Sensitivity PSEN -11 dBm
Overload PAVE -2 dBm
LOS Assert Pa -30 dBm
LOS De-assert Pd -12 dBm
LOS Hysteresis Pd-Pa 0.5 dB
Notes:
1. Measured with data rate at 25.78Gb/s, ER=7dB, Tc=25degC, BER less than 5E-5 with PRBS231
-1.
7. DWDM-SFP25G-10-C17-T02#131011
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 7 -
Pin Symbol Name Note
1 VEET Transmitter Ground 1
2 Tx_FAULT Transmitter Fault 2
3 Tx_DIS Transmitter Disable. Laser output disabled on high or open 3
4 SDA 2-wire Serial Interface Data Line 2
5 SCL 2-wire Serial Interface Clock Line 2
6 MOD_ABS Module Absent. Grounded within the module 4
7 RS0 Rate Select 0
8 RX_LOS Loss of Signal indication. Logic 0 indicates normal operation 2
9 RS1 Rate Select 1
10 VEER Receiver Ground 1
11 VEER Receiver Ground 1
12 RD- Receiver Inverted DATA out. AC Coupled
13 RD+ Receiver DATA out. AC Coupled
14 VEER Receiver Ground 1
15 VCCR Receiver Power Supply
16 VCCT Transmitter Power Supply
17 VEET Transmitter Ground 1
18 TD+ Transmitter DATA in. AC Coupled
19 TD- Transmitter Inverted DATA in. AC Coupled
20 VEET Transmitter Ground 1
Notes:
1. Module circuit ground is isolated from module chassis ground within the module.
2. Should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15V and 3.6V.
3. Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.
4. Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to
Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ. Mod_ABS is asserted “High” when the SFP+ module
is physically absent from a host slot.
8. DWDM-SFP25G-10-C17-T02#131011
Guilin GLsun Science and Tech Group Co., LTD.
Tel: +86-773-3116006 info@glsun.com Web: www.glsun.com
- 8 -
Digital Diagnostic Specifications
The DWDM-SFP25G-10-C17-T02 transceivers can be used in host systems that require either internally or
externally calibrated digital diagnostics.
Package Dimensions
Ordering Information
Part Number Description
DWDM-SFP25G-10-C17-T02-C SFP28, up to 25.78Gb/s, DWDM wavelengths, 10km, 0~70℃
DWDM-SFP25G-10-C17-T02-I SFP28, up to 25.78Gb/s, DWDM wavelengths, 10km, -40~85℃
Parameter Symbol Unit Min Max Accuracy Note
Transceiver temperature DTemp-E ºC -45 +90 ±5ºC 1,2
Transceiver supply voltage DVoltage V 2.8 4.0 ±3%
Transmitter bias current DBias mA 0 127 ±10% 3
Transmitter output power DTx-Power dBm -3 +7 ±2dB
Receiver average input power DRx-Power dBm -18 3 ±3dB
Notes:
1. When Operating temp.=0~70 ºC,the range will be min=-5, Max=+75
2. Internally measured
3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser