Dumpscafe Cisco CCNA 200-301 Exam Dumps PDF

Cisco Certified
Network Associate
Version: Demo
[ Total Questions: 10]
Web: www.dumpscafe.com
Email: support@dumpscafe.com
Cisco
200-301

IMPORTANT NOTICE
Feedback
We have developed quality product and state-of-art service to ensure our customers interest. If you have any
suggestions, please feel free to contact us at feedback@dumpscafe.com
Support
If you have any questions about our product, please provide the following items:
exam code
screenshot of the question
login id/email
please contact us at and our technical experts will provide support within 24 hours.
support@dumpscafe.com
Copyright
The product of each order has its own encryption code, so you should use it independently. Any unauthorized
changes will inflict legal punishment. We reserve the right of final explanation for this statement.

Cisco - 200-301
Pass Exam
1 of 11
Verified Solution - 100% Result
Category Breakdown
Category Number of Questions
Network Fundamentals 7
IP Services 1
Automation and Programmability 1
Network Access 1
TOTAL 10
Exam Topic Breakdown
Exam Topic Number of Questions
Topic 5 : Simulations / Lab 2
Topic 1 : Exam Pool A 2
Topic 3 : Exam Pool C 2
Topic 4 : Exam Pool D (NEW) 2
Topic 2 : Exam Pool B 2
TOTAL 10

Cisco - 200-301
Pass Exam
2 of 11
Topic 5, Simulations / Lab
Question #:1 - - [Network Fundamentals]
(Exam Topic 5)
Physical connectivity is implemented between the two Layer 2 switches,
and the network connectivity between them must be configured.
I . Configure an LACP EtherChanneI and number it as 44; configure it
between switches SWI and SW2 using interfaces EthernetO/O and
Ethernet0/1 on both sides. The LACP mode must match on both ends.
2. Configure the EtherChanneI as a trunk link.
3. Configure the trunk link with 802. Iq tags.
4. Configure VLAN 'MONITORING' as the untagged VLAN of the
EtherChannel.
==================
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using
the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab closes and cannot be reopened.

Cisco - 200-301
Pass Exam
3 of 11
Solution is given below explanation.
Explanation
To configure an LACP EtherChannel and number it as 44, configure it between switches SW1 and SW2 using
interfaces Ethernet0/0 and Ethernet0/1 on both sides, configure the EtherChannel as a trunk link, configure
the trunk link with 802.1q tags, and configure VLAN ‘MONITORING’ as the untagged VLAN of the
EtherChannel, you need to follow these steps:
On both SW1 and SW2, enter the global configuration mode by using the configure terminal command.
On both SW1 and SW2, select the two interfaces that will form the EtherChannel by using the interface range
ethernet 0/0 - 1 command. This will enter the interface range configuration mode.
On both SW1 and SW2, set the protocol to LACP by using the channel-protocol lacp command.
On both SW1 and SW2, assign the interfaces to an EtherChannel group number 44 by using the channel-
group 44 mode active command. This will create a logical interface named Port-channel44 and set the LACP
mode to active on both ends. The LACP mode must match on both ends for the EtherChannel to form.
On both SW1 and SW2, exit the interface range configuration mode by using the exit command.
On both SW1 and SW2, enter the Port-channel interface configuration mode by using the interface port-
channel 44 command.

Cisco - 200-301
Pass Exam
4 of 11
A.
B.
C.
D.
On both SW1 and SW2, configure the Port-channel interface as a trunk link by using the switchport mode
trunk command.
On both SW1 and SW2, configure the Port-channel interface to use 802.1q tags for VLAN identification by
using the switchport trunk encapsulation dot1q command.
On both SW1 and SW2, configure VLAN ‘MONITORING’ as the untagged VLAN of the Port-channel
interface by using the switchport trunk native vlan MONITORING command.
On both SW1 and SW2, exit the Port-channel interface configuration mode by using the exit command.
On both SW1 and SW2, save the configuration to NVRAM by using the copy running-config startup-config
command.
Question #:2 - - [IP Services]
(Exam Topic 5)
Which type of DNS record is used to specify the mail server responsible for accepting email messages on
behalf of a recipient's domain?
MX record
TXT record
A record
SRV record
Answer: C

Cisco - 200-301
Pass Exam
5 of 11
A.
B.
C.
D.
E.
A.
B.
C.
D.
Topic 1, Exam Pool A
(Exam Topic 1)
Refer to Exhibit.
The loopback1 interface of the Atlanta router must reach the loopback3 interface of the Washington router.
Which two static host routes must be configured on the NEW York router? (Choose two)
ipv6 route 2000::1/128 2012::1
ipv6 route 2000::3/128 2023::3
ipv6 route 2000::3/128 s0/0/0
ipv6 route 2000::1/128 2012::2
ipv6 route 2000::1/128 s0/0/1
Answer: A B
Question #:4 - - [Automation and Programmability]
(Exam Topic 1)
Which HTTP status code is returned after a successful REST API request?
200
301
404

Cisco - 200-301
Pass Exam
6 of 11
D. 500
Answer: A

Cisco - 200-301
Pass Exam
7 of 11
A.
B.
C.
D.
A.
Topic 3, Exam Pool C
(Exam Topic 3)
Refer to the exhibit.
Traffic that is flowing over interface TenGigabitEthernet0/0 experiences slow transfer speeds. What is the
reason for the issue?
heavy traffic congestion
a duplex incompatibility
a speed conflict
queuing drops
Answer: C
Question #:6 - - [Network Access]
(Exam Topic 3)
Which PoE mode enables powered-device detection and guarantees power when the device is detected?
dynamic

Cisco - 200-301
Pass Exam
8 of 11
B.
C.
D.
static
active
auto
Answer: B

Cisco - 200-301
Pass Exam
9 of 11
A.
B.
C.
D.
A.
B.
C.
D.
Topic 4, Exam Pool D (NEW)
(Exam Topic 4)
What is the subnet mask for route 172.16.4.0?
255.255.248.0
255.255.254.0
255.255.255.192
255.255.240.0
Answer: A
(Exam Topic 4)
Which component controls and distributes physical resources for each virtual machine?
OS
hypervisor
CPU
physical enclosure
Answer: B

Cisco - 200-301
Pass Exam
10 of 11
A.
B.
C.
D.
Topic 2, Exam Pool B
(Exam Topic 2)
Which action does the router take as rt forwards a packet through the network?
The router replaces the source and desinaoon labels wth the sending router uterface label as a source
and the next hop router label as a desbnabon
The router encapsulates the source and destination IP addresses with the sending router P address as the
source and the neighbor IP address as the destination
The router replaces the original source and destination MAC addresses with the sending router MAC
address as the source and neighbor MAC address as the destination
The router encapsulates the original packet and then includes a tag that identifies the source router
MAC address and transmit transparently to the destination
Answer: C
(Exam Topic 2)

Cisco - 200-301
Pass Exam
11 of 11
A.
B.
C.
D.
Only four switches are participating in the VLAN spanning-tree process.
Branch-1 priority 614440
Branch-2: priority 39082416
Branch-3: priority 0
Branch-4: root primary
Which switch becomes the permanent root bridge for VLAN 5?
Branch-1
Branch-2
Branch-3
Branch-4
Answer: C
Explanation
Dynamic ARP inspection is an ingress security feature; it does not perform any egress checking.

About dumpscafe.com
dumpscafe.com was founded in 2007. We provide latest & high quality IT / Business Certification Training Exam
Questions, Study Guides, Practice Tests.
We help you pass any IT / Business Certification Exams with 100% Pass Guaranteed or Full Refund. Especially
Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper, Check Point, LPI, Nortel, EXIN and so on.
View list of all certification exams: All vendors
We prepare state-of-the art practice tests for certification exams. You can reach us at any of the email addresses
listed below.
Sales: sales@dumpscafe.com
Feedback: feedback@dumpscafe.com
Support: support@dumpscafe.com
Any problems about IT certification or our products, You can write us back and we will get back to you within 24
hours.

Dumpscafe Cisco CCNA 200-301 Exam Dumps PDF

More Related Content

Recently uploaded

Featured

Dumpscafe Cisco CCNA 200-301 Exam Dumps PDF