This document provides product information for communications protection products manufactured by DSG-Canusa. It includes technical specifications for fiber optic splice protectors, heat shrink tubing, gel filled closures, self fusing tape, and drop tubing. The products are designed to prevent water and mechanical damage to cables, splices, and connectors for broadband communications applications.
Dual Wall Flame Retarded Heat Shrink Tubing
Military Grade Heat Shrink : MIL-DTL 23053/4
Underwriters Lab : UL 224
CSA : 600V, 125 Degrees Celsius
Heat Shrink Tubings - Insulate, Protect & Identify
SPDW heat shrink is ideal for sealing connector to cable transitions and similar moisture proofing applications with adhesive lined tubing.
SPDW is approved to MIL-DTL 23053/4 and UL 224.
Shrinktek Dual Wall Flame Retarded Heat Shrink Tubing
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Dual Wall Flame Retarded Heat Shrink Tubing
Military Grade Heat Shrink : MIL-DTL 23053/4
Underwriters Lab : UL 224
CSA : 600V, 125 Degrees Celsius
Heat Shrink Tubings - Insulate, Protect & Identify
SPDW heat shrink is ideal for sealing connector to cable transitions and similar moisture proofing applications with adhesive lined tubing.
SPDW is approved to MIL-DTL 23053/4 and UL 224.
Shrinktek Dual Wall Flame Retarded Heat Shrink Tubing
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Helashrink heatshrink boots and moulded shapes in conjunction with specialist heatshrink tubing make it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems.
Hellermann Tyton Helashrink heatshrink boots (straight and right-angled) and moulded shapes are available for the complete range of electrical and electronic harnessing applications. Heat shrink boots and shapes can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished with minimum weight and bulk using Hellermann Tyton Helashrink heat shrink components.
Hellermann Tyton Heat Shrink Moulded Shapes & Boots - Overview....
Hellermann Tyton Helashrink heat shrinkable shapes, end caps and cable break-out boots with and without inner adhesive. Hellermannn Tyton heat shrink backshells, 2-way outlet shapes, 3-way outlet shapes, 4-way outlet shapes, 5-way outlet shapes up to 6-way outlet shapes. Hellermann Tyton heat shrink right angle boot 90°, 45°C angle, T-shapes, Y-outlet, VG-style shapes. Heat shrink cable end caps for low voltage applications, two components epoxy adhesive and hot melt tape.
Military Grade: MIL DTL 23053/1
Heat Shrink Tubings - Insulate, Protect & Identify
SE heat shrink is ideal for providing mechanical protection with solvent resistance to gasoline, hydraulic fluid and lubricating oils.
Approved to military grade MIL-DTL 23053/1 the SE range of abrasion resistant elastomer heat shrink tubing has a shrink ratio of 2:1 and operating temperatures of -70 to 120 Degrees Celsius.
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Izumi Cutting & Crimping Tools for Overhead Line Conductors & Cables
Izumi Tools include high quality hydraulic compression, crimping and cutting tools, cable cutters andIzumi - Cable Crimping & Cable Cutting Tools hydraulic pumps for the Utility, Transmission, Distribution, Telecoms and Overhead Line markets.
Izumi hydraulic cable cutters and crimpers include tooling ranges for overhead line conductor applications - this includes cutting and crimping tools for ABC (Aerial Bundled Conductor), AAAC (All Aluminium Alloy Conductor), ASCR (Aluminium Conductor Steel Reinforced) and copper overhead lines.
Izumi cutting and crimping tools are available to suit all UK and most overseas conductors (copper and aluminium) including horse, keziah, lynx, lion, hen, upas, zebra, totara, collybia, rubus, sorbus, araucaria and redwood.
Izumi Cutting Tools - Hydraulic : Izumi manufacture a range of hydraulic cutters that are lightweight and portable requiring no set-up time. Izumi overhead line and cable cutters cut with amazing speed and are ideal in close quarters work such as manholes, cable joint trenches, underwater and in all environments where acetylene cable and overhead line conductor cutters cannot be used.
Izumi Crimping Tools - Hydraulic : Izumi manufacture a wide selection of hydraulic compression and crimping tools from 5 to 200 tons output force, in dieless and die format to suit all compression systems. Most Izumi hand crimping tools have two stage pumping for rapid die advance.
Izumi cutting and crimping tools are approved by UK DNO's including Scottish Power, Northern Power Grid, Western Power Distribution, Electricity North West (ENW), UK Power Networks, Northern Ireland Electricity (NIE) and Scottish & Southern Energy for use by overhead linesmen and cable jointers for cutting and crimping cables and conductors.
Roxtec cable transit frames provide rectangular sealing frames for cables and pipes ensuring safety, efficiency and long-term operational reliability - Roxtec cable and pipe seals protect against fire, gas, water, dusts, pests, blast load and electromagnetic interference.
Roxtec Sealing Modules - Options .....
Roxtec RM Cable & Pipe Sealing Modules - frames, modules and round seals in the Roxtec RM group are based on 60mm standard depth. Individual products, such as Roxtec RS seals, may present a wider range of depth. Typical areas of use for Roxtec RM seals include sealing of cables, metals nad plastic pipes in walls, floors, bulkheads and decks.
Roxtec CM Cable & Pipe Sealing Modules - frames, modules and round seals in the Roxtec CM group are based on the standard depth of 15-40mm. Typical areas of use for Roxtec RM seals include sealing of cables through smaller electrical enclosures and cabinets.
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
2. Table
of
Contents
Communication Products
CFSP/CFRP.............................................................................................................................3
Fiber optic splice protector
CFTV......................................................................................................................................5
Adhesive lined tubing for splice and connector protection
CFTV QuickSeal™....................................................................................................................7
Adhesive wraparound sleeve for environmental sealing without disconnection
CGEL......................................................................................................................................9
Gel filled closures for environmental protection of coaxial drop splices
CTB-15.................................................................................................................................11
Self fusing tape
DROP...................................................................................................................................13
Drop tubing
4. Communication Products
Unique Solutions for Broad Band Communications
DSG-Canusa is the leading manufacturer of outside plant protection products
for broad band communications.
Our innovative products prevent water ingress and mechanical damage to
cables, splices and connectors.
USA: 800.422.6872
Canada: 800.845.6808
www.dsgcanusa.com
2
5. CFSP/CFRP
Insulate
Seal
Protect
Fiber Optic Splice Protector
A specially designed cross-linked polyolefin tubing system, with meltable liner, providing strength and protection
to optical fiber splices
Features
and
Benefits
• Single fiber and ribbon fiber splice protector available
• Single holed (preshrunk) ends eliminate improper fiber threading
• Smooth, de-burred stainless steel reinforcing member ends decrease the risk of fiber damage during
installation
•
•
•
•
Extended liner length prevents contact between the fiber and the backbone
Clear sleeve design permits easy centering of splice before heating
Continuous operating temperature: -40°C to 60°C
Shrink temperature: 90°C
Standards
• GR-1380 compliant
Typical Applications
• Protection of fusion splices in optical networks
3
6. CFSP/CFRP
Fiber Optic Splice Protector
Dimensions
Order Number
Nominal Sleeve Length
mm
Inside Diameter of Inner Liner
(min.)
Nominal Support Rod Diameter*
Packaging
in
mm
in
mm
in
Number of
Splices
pieces/bag
CFSP Single Fiber Protectors
CFSP-12-61
61.0
2.40
1.5
0.06
1.2
0.05
100
1
CFSP-12-45
45.0
1.77
1.5
0.06
1.2
0.05
100
1
CFSP-12-23
23.0
0.90
1.5
0.06
1.2
0.05
100
1
1.57
3.0
0.12
1.8
0.07
50
CFRP Ribbon Fiber Protector
CFRP-12
40.0
12
*Support rod for CFSP is made from stainless steel
*Support rod for CFRP is made from ceramic
Ordering
• Refer to the table to select the CFSP/CRFP with the desired sleeve length for overlap on each end of the area
to be covered.
• Order Example: CFSP-12-61
• Packaging: CFSP: 100 pieces per bag; CFRP: 50 pieces per bag
Please contact your Customer Service Representative for information on custom colours, sizes, lengths and
material data sheet.
All information contained in this data sheet is believed to be reliable. We advise, however, that customers should separately evaluate the suitability of our products for their particular application. DSG-Canusa and ShawCor give no guarantees in respect of the accuracy or sufficiency of the information
presented and disclaim any liability regarding its use. Our responsibilities are only those listed in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual, indirect or consequential damage or damages arising from the sale, resale, transfer, use or misuse
of the product.
USA: 800.422.6872
Canada: 800.845.6808
www.dsgcanusa.com
4
7. CFTV
3:1
Shrink Ratio
Insulate
Seal
Protect
Heat Shrink Cable Sleeves
Heat shrink tubing and adhesive liner combination that established the CATV industry standard for splice and
connector protection
Features
•
•
•
•
•
•
•
•
•
and
Benefits
Shrink ratio: 3:1
Craft friendly installation
Exceptional split resistance
CFTV adhesive retains bond providing long term protection
Selective strippability to meet CATV industry specifications
Minimal heat required to produce error free installation without splitting
Thermochromatic lines change colour to signal waterproof seal
Shrinks and seals in half the time of alternative products
Continuous operating temperature: -55°C to 110°C
Typical Applications
• Strain relief of coaxial connectors
• Waterproof protection of CATV connectors
5
8. CFTV
Heat Shrink Cable Sleeves
Dimensions
Expanded
Order Number
Recovered
Internal Diameter (min.) D
mm
in
0400
10.2
0.40
0750
19.0
1100
27.9
1300
Internal Diameter (max.) d
mm
Wall Thickness (nom.) W
Application Range
Use
for
General
Lengths
in
mm
in
mm
in
m
in
3.8
0.15
2
0.08
4.5 - 8.5
.18 - .34
1.2
48
0.75
5.6
0.22
2
0.08
6.0 - 16.5
.24 - .65
1.2
48
1.10
10.2
0.40
2
0.08
11.5 - 25.0
.45 - 1.0
1.2
48
33.0
1.30
10.2
0.40
2
0.08
11.5 - 30.0
.45 - 1.2
1.2
48
1500
38.1
1.50
12.7
0.50
2
0.08
14.0 - 35.0
.55 - 1.4
1.2
48
1700
43.2
1.70
12.7
0.50
2
0.08
14.0 - 40.0
.55 - 1.6
1.2
48
2050
52.1
2.05
19.0
0.75
2
0.08
21.0 - 45.0
.82 - 1.8
1.2
48
2750
69.8
2.75
25.4
1.00
2
0.08
30.0 - 63.0
1.2 - 2.5
1.2
48
Ordering
• Select a dimension which will shrink snugly over the component to be covered. If recovery is restricted the
resulting wall thickness will be less than specified.
• Order Example: CFTV, 1700
Please contact your Customer Service Representative for information on custom sizes, lengths and material data
sheet.
All information contained in this data sheet is believed to be reliable. We advise, however, that customers should separately evaluate the suitability of our products for their particular application. DSG-Canusa and ShawCor give no guarantees in respect of the accuracy or sufficiency of the information
presented and disclaim any liability regarding its use. Our responsibilities are only those listed in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual, indirect or consequential damage or damages arising from the sale, resale, transfer, use or misuse
of the product.
USA: 800.422.6872
Canada: 800.845.6808
www.dsgcanusa.com
6
9. CFTV QuickSeal™
>3:1
Shrink Ratio
Insulate
Seal
Protect
Heat Shrink Wraparound Sleeve
Heat shrink wraparound sleeve with adhesive for complete environmental sealing without the need for
disconnection. Ideal for the protection of housing to housing connectors, retrofit protection of exposed
connectors and the repair of damaged cable or fiber
Features
•
•
•
•
•
•
•
•
•
and
Benefits
Shrink ratio: >3:1
Fast and simple installation without interruption of service
Repair squirrel damaged cable
Proven CANUSA CFTV adhesive ensures an absolutely waterproof seal
Selective strippability to meet CATV industry specifications
Minimal heat required to produce error free installation without splitting
Thermochromatic lines that change colour upon correct shrink temperature
CFTV QuickSeal™ can be cut to size in field to suit application
Continuous operating temperature: -55°C to 110°C
Typical Applications
• Repair damaged cable and fiber
• Retrofit protection of connectors without disconnecting
7
10. CFTV QuickSeal™
Heat Shrink Wraparound Sleeve
Dimensions
Order
Number
Length
Expanded Internal Diameter
(max.) D
Width
Recovered Internal
Diameter (max.) d
Recovered Wall Thickness
(nom.) W
in
mm
in
mm
in
mm
in
mm
in
mm
1
36
914
7
178
1.7
43
0.55
14
0.06
1.5
2
9
229
7
178
1.7
43
0.55
14
0.06
1.5
Installation Notes
• CFTV QuickSeal™ is a one size fits all solution that can accommodate all sizes of cable and connectors.
CFTV QuickSeal™ can be cut to length and width in the field to fit the specific application. Simply wrap
CFTV QuickSeal™ around the cable or connector, ensuring adequate overlap, and then firmly apply the
closure to hold CFTV QuickSeal™ together during the heat shrinking process. Please refer to the installation
instructions included with each CFTV QuickSeal™ for more detailed information.
Ordering
• Please specify the product name plus the options you require.
• Order Example: CFTV QuickSeal™, 1, 36 in length
Please contact your Customer Service Representative for information on custom sizes, lengths and material data
sheet.
All information contained in this data sheet is believed to be reliable. We advise, however, that customers should separately evaluate the suitability of our products for their particular application. DSG-Canusa and ShawCor give no guarantees in respect of the accuracy or sufficiency of the information
presented and disclaim any liability regarding its use. Our responsibilities are only those listed in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual, indirect or consequential damage or damages arising from the sale, resale, transfer, use or misuse
of the product.
USA: 800.422.6872
Canada: 800.845.6808
www.dsgcanusa.com
8
11. CGEL
Insulate
Seal
Protect
Drop Splice Enclosure
Gel filled closures are a simple, fast and effective method for providing complete environmental protection for
coaxial drop splices
Features
•
•
•
•
and
Benefits
Single piece, clam shell design, requires no additional tools for installation
Gel filled for complete waterproof protection
Expansion chambers prevent Gel overflow
Accommodates a wide range of environmentally sealed coaxial connectors and cable types including
quad shielded cable
• Available in two sizes:
- CE 596 for 59 and 6 series cable
- CE 711 for 7 and 11 series cable
•
•
•
•
Channel provided to retain messenger cable
Fully re-enterable
Tough outer shell withstands impacts to 5 ft-lb
Withstands extreme temperatures (-45°C to
90°C
Standards
• Meets SCTE IPS-TP-013 (ANSI/SCTE 60
2004) requirements for water immersion and
temperature cycling
Typical Applications
• Environmental protection of cable splices
9
12. CGEL
Drop Splice Enclosure
Dimensions
Order Number
Nominal Diameter
Lengths
mm
in
mm
in
CE 596
25.4
1.0
116
4.6
CE 711
31.0
1.2
165
6.5
Applicable Cables
Cables: All 59 and 6 series coaxial cables including quad shield with messengers
All 7 and 11 series coaxial cables including quad shield with messengers
Connectors
59
and
6 Series
7
and
11 Series
DIGCON
D2, Type II and S
D2, S and RG 11
T&B
F Series
SNS Series
SNS Series
Corning GILBERT
GF Type
AHS, UltraEase and Ultra Range
GAF
AHS, UltraEase and Ultra Range
PPC
CMP, EX and AquaTight EX
EX and AquaTight EX
Others
F-Conn, Stirling
F-Conn, Stirling
Ordering
• Please specify the product name plus the options you require.
• Order Example: CGEL, CE 596
• Packaging: 12 pieces per box
All information contained in this data sheet is believed to be reliable. We advise, however, that customers should separately evaluate the suitability of our products for their particular application. DSG-Canusa and ShawCor give no guarantees in respect of the accuracy or sufficiency of the information
presented and disclaim any liability regarding its use. Our responsibilities are only those listed in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual, indirect or consequential damage or damages arising from the sale, resale, transfer, use or misuse
of the product.
USA: 800.422.6872
Canada: 800.845.6808
www.dsgcanusa.com
10
13. CTB-15
Insulate
Seal
Protect
Self Fusing Tape
EPR based self fusing tape designed for the Communications industry
Features
•
•
•
•
•
•
•
and
Benefits
Provides protection where heat/flame is prohibited
Covers any shape including high transition areas and elbows
Clean strippable
Layers fuse together to form a boot that provides complete environmental protection and insulation
UV and ozone resistant
Proven long term protection
Continuous operating temperature: -40°C to 90°C
Typical Applications
• Environmental protection of connectors in tight
locations or when torch is not permitted
• Protect connectors in Cable TV, Wireless and
Telecom applications
11
14. CTB-15
Self Fusing Tape
Dimensions
Order Number
Width
Thickness
Roll Length
mm
CTB-15
in
mm
in
m
ft
38.1
1.5
0.76
0.03
4.57
15
Application Instructions
•
•
•
•
The surface of cable and connector should be clean.
Start the tape on cable approximately two inches from connector.
Make sure the tape is stretched during application.
While stretching the tape, make one wrap on cable ensuring the tape is wrapped onto itself as it will only
adhere to itself. Continue wrapping the cable and connector using half overlap layers.
• To terminate, wrap the tape onto itself and place your thumb at the termination point and stretch the tape until
it breaks.
• Two layers are recommended
• The loose end of the termination should be thumbed down.
Ordering
• Please specify the product name plus the options you require.
• Order Example: CTB-15
All information contained in this data sheet is believed to be reliable. We advise, however, that customers should separately evaluate the suitability of our products for their particular application. DSG-Canusa and ShawCor give no guarantees in respect of the accuracy or sufficiency of the information
presented and disclaim any liability regarding its use. Our responsibilities are only those listed in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual, indirect or consequential damage or damages arising from the sale, resale, transfer, use or misuse
of the product.
USA: 800.422.6872
Canada: 800.845.6808
www.dsgcanusa.com
12
15. DROP
3:1
Shrink Ratio
Insulate
Seal
Protect
Drop Tubing
Thin wall heat shrink tubing provides excellent environmental protection and insulation for CATV drop connectors
Features
•
•
•
•
•
•
•
•
and
Benefits
Shrink ratio: 3:1
Meltable inner liner encapsulates cable and connection completely
Excellent UV and ozone resistance
Resistant to all fluids and solvents
Accommodates all F-Connectors and cables
Flexible
Continuous operating temperature: -55°C to 110°C
Shrink temperature: 120°C
Typical Applications
• Sealing of coaxial drop connectors
13
16. DROP
Drop Tubing
Dimensions
Expanded
Order
Number
Recovered
Internal Diameter (min.) D
Internal Diameter (max.) d
Wall Thickness (nom.) W
Meltable Wall Thickness
(nom.)
Lengths
mm
in
mm
in
mm
in
mm
in
m
in
0500
12.7
0.50
5.0
0.19
1.4
0.05
0.9
0.03
1.2
48
0750
19.1
0.75
8.0
0.31
1.7
0.06
1.0
0.04
1.2
48
Ordering
• Select a dimension which will shrink snugly over the component to be covered. If recovery is restricted the
resulting wall thickness will be less than specified.
• Options:
• Colour: Black (BK), Blue (BL)
• Order Example: DROP Tubing, 0500, black, unprinted
Please contact your Customer Service Representative for information on custom colours, sizes, lengths and
material data sheet.
All information contained in this data sheet is believed to be reliable. We advise, however, that customers should separately evaluate the suitability of our products for their particular application. DSG-Canusa and ShawCor give no guarantees in respect of the accuracy or sufficiency of the information
presented and disclaim any liability regarding its use. Our responsibilities are only those listed in our Standard Terms and Conditions of Sale for these products. In no instance will we be liable for any eventual, indirect or consequential damage or damages arising from the sale, resale, transfer, use or misuse
of the product.
USA: 800.422.6872
Canada: 800.845.6808
www.dsgcanusa.com
14
17. Americas
DSG-Canusa, a division of ShawCor Inc.
173 Commerce Blvd.
Cincinnati, Ohio 45140
USA
Toll Free:
Telephone:
Fax:
eMail:
800 422 6872
513 683 7800
513 683 7809
sales@dsgcanusa.com
Canada / Asia Pacific
DSG-Canusa, a division of ShawCor Ltd.
25 Bethridge Road
Toronto, Ontario M9W 1M7
Canada
Toll Free:
Telephone:
Fax:
eMail:
800 845 6808
416 743 7111
416 743 7752
sales@dsgcanusa.com
Europe / Middle East / Africa
DSG-Canusa GmbH & Co. KG
HeidestraBe 5
D-53340, Meckenheim
Germany
Telephone:
Fax:
eMail:
www.dsgcanusa.com
49 0 22 25/88 92-0
49 0 22 25/88 92-44
sales@dsg-canusa.de
November 2007