The Fujitsu PRIMERGY RX100 S7 is an entry mono socket rack server designed to meet small budgets by delivering highest energy efficiency of its class and a rich set of optional expansions to meet individual demands. Optimized for infrastructure and communication applications, this 1U server delivers up to 32GB RAM, up to 3 PCIe slots and up to 4 hard disk drives.
The Fujitsu PRIMERGY RX200 S7 is a rack server that provides high performance of the new Intel® Xeon® E5 product family, expandability up to 768GB of memory and up to 94% energy efficiency - all in 1U space saving housing. Thus, the PRIMERGY RX200 S7 is ideal for virtualization and cloud, small databases as well as for high performance computing.
Read the complete guide on Intel® Xeon® Processor E5-2600 which is a best combination of performance, power efficiency, and cost. Also know more about Silicon Mechanics Products with Intel ® Xeon® Processor E5-2600 Series CPUs.
AMD Opteron™ 6200 Series Processor Guide, Silicon Mechanicswaltermoss123
Read the complete guide on AMD Opteron™ 6200 Series Processor which provides best performance, scalability, and efficiency for today’s applications. Also know more about Silicon Mechanics Products with the AMD Opteron™ 6200 Series Processor.
This session provides an architectural introduction of Intel’s enthusiast system solutions, with an emphasis on performance tuning for gaming and content creation. The discussion will include key overclocking ecosystem ingredients such as Intel® Extreme Memory Profile (Intel® XMP) technology. Live demos will accompany our discussion. Attendees will leave with a good understanding of the overclocking capabilities of Intel’s latest processors.
http://myeventagenda.com/sessions/0B9F4191-1C29-408A-8B61-65D7520025A8/7/5
The Fujitsu PRIMERGY RX200 S7 is a rack server that provides high performance of the new Intel® Xeon® E5 product family, expandability up to 768GB of memory and up to 94% energy efficiency - all in 1U space saving housing. Thus, the PRIMERGY RX200 S7 is ideal for virtualization and cloud, small databases as well as for high performance computing.
Read the complete guide on Intel® Xeon® Processor E5-2600 which is a best combination of performance, power efficiency, and cost. Also know more about Silicon Mechanics Products with Intel ® Xeon® Processor E5-2600 Series CPUs.
AMD Opteron™ 6200 Series Processor Guide, Silicon Mechanicswaltermoss123
Read the complete guide on AMD Opteron™ 6200 Series Processor which provides best performance, scalability, and efficiency for today’s applications. Also know more about Silicon Mechanics Products with the AMD Opteron™ 6200 Series Processor.
This session provides an architectural introduction of Intel’s enthusiast system solutions, with an emphasis on performance tuning for gaming and content creation. The discussion will include key overclocking ecosystem ingredients such as Intel® Extreme Memory Profile (Intel® XMP) technology. Live demos will accompany our discussion. Attendees will leave with a good understanding of the overclocking capabilities of Intel’s latest processors.
http://myeventagenda.com/sessions/0B9F4191-1C29-408A-8B61-65D7520025A8/7/5
I have collected all the necessary information about various hardware blocks of Nvidia Tegra K1 processor and put them together. It would be helpful for those who are/going to work on it by giving the details in a very concise fashion.
The Fujitsu STYLISTIC Q702 is the perfect choice for mobile professionals looking for high-performance
without compromising on versatility. With its attachable keyboard option, this lightweight hybrid
tablet PC enables easy content creation and consumption. Either use it as a tablet when traveling
or attach the keyboard and convert the STYLISTIC Q702 into a traditional notebook for additional
usability in the office. The 29.5 cm (11.6-inch) display with pen and finger input support offers you
excellent flexibility while optional 4G/LTE completes the picture of a professional tablet.
HPE ProLiant DL20 Gen10 server delivers a compact and versatile server at an affordable price. Deploy the portable form factor in small, remote or branch offices, as a compact yet powerful point of sale platform in transport, retail and hospitality environments, or as a flexible configuration for customization in space constrained environments of OEM, military and government customers.This datasheet includes features, port description, configuration guide and specification of this series.
Single Board Computer (SBC) Embedded Board. PICO-ITX SBC supports Intel® 22nm Atom™/Celeron® on-board SoC, DDR3L, VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, HD Audio and RoHS
The System x3100 M4 single socket tower server is designed for small businesses and first-time server buyers looking for a solution to improve business efficiency. It delivers several IBM® innovative features in a compact mini 4U form factor with a competitive price. The IBM System x3100 M4 provides next-generation performance in an innovative and compact design with flexible configuration options, built-in security, and systems management capabilities...
Why A Blade Server?
More agile & scalable
Less setup & installation time
Less expensive in long-term deployments
Efficient cooling and power consumption
I have collected all the necessary information about various hardware blocks of Nvidia Tegra K1 processor and put them together. It would be helpful for those who are/going to work on it by giving the details in a very concise fashion.
The Fujitsu STYLISTIC Q702 is the perfect choice for mobile professionals looking for high-performance
without compromising on versatility. With its attachable keyboard option, this lightweight hybrid
tablet PC enables easy content creation and consumption. Either use it as a tablet when traveling
or attach the keyboard and convert the STYLISTIC Q702 into a traditional notebook for additional
usability in the office. The 29.5 cm (11.6-inch) display with pen and finger input support offers you
excellent flexibility while optional 4G/LTE completes the picture of a professional tablet.
HPE ProLiant DL20 Gen10 server delivers a compact and versatile server at an affordable price. Deploy the portable form factor in small, remote or branch offices, as a compact yet powerful point of sale platform in transport, retail and hospitality environments, or as a flexible configuration for customization in space constrained environments of OEM, military and government customers.This datasheet includes features, port description, configuration guide and specification of this series.
Single Board Computer (SBC) Embedded Board. PICO-ITX SBC supports Intel® 22nm Atom™/Celeron® on-board SoC, DDR3L, VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, HD Audio and RoHS
The System x3100 M4 single socket tower server is designed for small businesses and first-time server buyers looking for a solution to improve business efficiency. It delivers several IBM® innovative features in a compact mini 4U form factor with a competitive price. The IBM System x3100 M4 provides next-generation performance in an innovative and compact design with flexible configuration options, built-in security, and systems management capabilities...
Why A Blade Server?
More agile & scalable
Less setup & installation time
Less expensive in long-term deployments
Efficient cooling and power consumption
This Redbook talks through the benefits and product specification of IBM System x3500 M4. The x3500 M4 offers a flexible, scalable design and simple upgrade path to 32 HDDs, with up to eight PCIe 3.0 slots and up to 768 GB of memory. A high-performance dual-socket tower server, the IBM System x3500 M4, can deliver the scalability, reliable performance, and optimized efficiency for your business-critical applications. For more information on System x, visit http://ibm.co/Q7m3iQ.
http://www.scribd.com/doc/210742768/IBM-System-x3500-M4
Take a look at the spec for our fanless embedded boxed system
Spec and key features included as well as dimension drawings.
For more info please visit a similar product in the range here http://crystal-display.com/cds-offer-the-multi-use-tbox810-838-fl-fanless-box-pc/
Or contact us for more information via email on info@crystal-display.com or call +44(0) 1634 327420
iTG India offers Advantech's 2nd & 3rd Gen Intel® Core™ i7/i5/i3 LGA1155 MicroATX with H61, CRT/DVI/LVDS, 10 COM, 10 USB 2.0, Dual LAN at best price & quality assurance.
Visit: https://www.itgindia.com/product/aimb-501/
Here are the product specification for IBM System x3300 M4. This product can be managed remotely.The x3300 M4 server contains IBM IMM2, which provides advanced service-processor control, monitoring, and an alerting function. The IMM2 lights LEDs to help you diagnose the problem, records the error in the event log, and alerts you to the problem. For more information on System x, visit http://ibm.co/Q7m3iQ.
Visit http://on.fb.me/LT4gdu to 'Like' the official Facebook page of IBM India Smarter Computing.
Learn about system specification for IBM System x3550 M4. The x3550 M4 offers numerous features to boost performance, improve scalability, and reduce costs. Improves productivity by offering superior system performance with up to 12-core processors, up to 30 MB of L3 cache, and up to two 8 GT/s QPI interconnect links. For more information on System x, visit http://ibm.co/Q7m3iQ.
IEI is een van de grootste leveranciers van producten voor industriële computersystemen. IEI levert honderden verschillende boards, systemen en onderdelen voor uiteenlopende applicaties in de industriële automatisering, defensie, medisch, infotainment en mobiel gebruik. Vooruitstrevende oplossingen bezorgen u als klant een kortere ontwerpcyclus zodat u de voorsprong op de concurrent kunt behouden en zelfs vergroten.
Jetson AGX Xavier and the New Era of Autonomous MachinesDustin Franklin
Deep-dive on NVIDIA Jetson AGX Xavier, designed to help you deploy advanced AI onboard robots, drones, and other autonomous machines. View the webinar here: https://bit.ly/2BWVWv1
With the HPE ProLiant DL325 Gen10 server, Hewlett Packard Enterprise is extending the worlds' most secure industry standard servers product families. This a secure and versatile single socket (1P) 1U AMD EPYC™ based platform offers an exceptional balance of processor, memory and I/O for virtualization and data intensive workloads. With up to 32 cores, up to 16 DIMMs, 2 TB memory capacity and support for up to 10 NVMe drives, this server delivers 2P performance with 1P economics.This datasheet includes features, port description, configuration guide and specification of this series.
Learn about IBM System x3400 M3. The x3400 M3 offers numerous features to boost performance and reduce costs, x3400 M3 has the ability to grow with your application requirements with these features. Powerful systems management features simplify local and remote management of the x3400 M3. For more information on System x, visit http://ibm.co/Q7m3iQ.
Visit http://on.fb.me/LT4gdu to 'Like' the official Facebook page of IBM India Smarter Computing.
The cloud is more than a buzzword these days. Companies large and small are looking skyward for
critical business functions that were once seen as untouchable—and they’re doing it for the timehonored
reasons of reducing cost and complexity. The prevailing wisdom not long ago was that a critical
application like email had to be housed in a company data center where teams of expensive IT staff
members could babysit it and do little else. But that’s all changed in the past few years.
Businesses today rely heavily on x86 servers within their datacenters to handle a wide range of workloads in diverse environments, from running cloud-computing systems and business-critical applications, to processing transactions, to managing data needed for business analytics. Those demands are raising the bar in terms of the reliability, efficiency and security that today's x86-based servers are expected to deliver.
- Discover what critical server attributes customers are seeking today.
- Learn about the current generation of x86 servers provide in security and performance.
- Gain insight into how Lenovo's coming acquisition of IBM's x86 server business will enhance value for partners and customers.
The world’s most secure, easy to use and affordable USB flash drive. Advanced Encryption Standard 256-bit hardware encryption. Advanced government-level security certification FIPS 140-2. Brute force hack defence mechanism.
The iStorage Desktop Secure Hard Drive is the world's first portable hardware encrypted hard drive with PIN code access and capacities of up to 3TB. It utilises military grade AES 256-bit hardware encryption, which encrypts all data stored on the drive in real time
The diskAshur is the world's most secure and portable encrypted USB 3.0 Hard Drive, enabling you to access the drive with your own unique pin and now at data transfer speeds of up to 10X faster than USB 2.
In this white paper, VoIP for Beginners, you’ll be introduced to how VoIP works.
Discover what occurs when a VoIP call is placed and received
Understand the key technical terms and learn the issues that affect bandwidth and call quality Learn three issues to consider when defining VoIP call quality
Today's workplace is rapidly changing. Workers are increasingly mobile. Over 52% of employees carry at least three devices for work, and may bring their own devices to and from work, a practice know as bring your own device (BYOD). These workplace dynamics have created IT challenges around data security and compliance, cost containment,and endpoint/image management.
The path forward is one that requires business transformation -transformation into an integrated enterprise. An integrated enterprise is an organizational structure that recognizes that a business operates best as a coordinated unit, and not as a mere collection of individual departments. Efficiency is achieved because focus is placed on processing transactions and information throughout the the enterprise. An ERP system is a prerequisite to the achievement of enterprise integration.
You data center is constantly becoming more complicated. The proliferation of virtualization has added an all-new layer of complexity to the picture. But there's a better way: New techniques, new technologies, and new solutions exist not only to make data protection easier, faster, and more reliable but also better to integrate the independent tasks of physical and virtual machine protection.
Premium Overhead Scanning. Allowing you to handle all document types, from Business Cards to Magazines. Offering all advantages expected from a ScanSnap scanner.ccIncluding Rack2-Filer Smart, a complete personal document management application.
Many of the mysteries of equipment failure,downtime, software and data corruption are the the result of a problematic supply of power. There is also a common problem with describing power problems in a a standard way. This white paper will describe the most common types of power disturbances, what can cause them, what they can do to your critical equipment, and how to safequard your equipment, using the IEEE standards for describing power quality problems.
Thin, light and perfectly portable, the ASUS VivoBook S400 is the perfect mobile companion you can take anywhere. The instant-on technology makes VivoBook always ready when you are, and its brilliant multi-touch display responds instantly to your fingertips, giving you a rich and intuitive Windows 8 experience.
The ScanSnap S1300i is a document scanner for the PC or Mac user
capable of scanning up to 12 pages per minute / 24 images per
minute. The 10 page ADF can cope with a mixed variety of single
or double sided documents ranging in different size and thickness
as well as colour or black and white.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
How world-class product teams are winning in the AI era by CEO and Founder, P...
Fujitsu PRIMERGY RX100 S7
1. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Data Sheet
Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack
server
Small in size and low in cost – rich in optional features
The PRIMERGY RX Rack Server family is the perfect operational costs. Furthermore, the ServerView™
platform to form dynamic infrastructures for your suite and remote management features (iRMC S3)
business processes today and in the coming simplify administration and enables centralized
decade. You will thus benefit several times over management for de-centralized installations.
from our recognized experience in optimized
data center technology and our innovative
strength in developing energy-efficient and cost/
performance-optimized rack systems for universal
use. PRIMERGY rack servers, built upon industry
standards, focus from a functional viewpoint
on core features: energy efficiency, reliability,
optimized for virtualization, ease of operation
and maintenance, flexibility for your future. And
thus they notably meet your requirements for
outstanding cost efficiency. Optimal operating
costs and long-term usability comply with
the IT quality required by your customers. Our
responsibility goes way beyond the hardware as
our tailor-made service packages mean that you
can rely on the best support for your IT during its
whole lifecycle.
PRIMERGY RX100 S7p
The Fujitsu PRIMERGY RX100 S7 is an entry
mono socket Intel® x86 rack server designed to
provide a solution for small budgets, yet enabling
a rich set of optional expansions to best meet
individual demands. Its usage patterns cover
infrastructure and communication applications
by delivering up to 32GB RAM, up to 3 PCIe slots
and up to 4 hard disk drives. Moreover, this 1U
server enables individual configuration with a
rich set of optional features, such as hot-plug
94% efficient power supply units, redundant fan,
RAID controller and the choice of Intel® Xeon®
E3, Intel® Core® and Intel® Celeron® processors.
By delivering the highest energy efficiency of its
class, the RX100 S7 also contributes to the lowest
Page 1 / 8 www.fujitsu.com/fts
2. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Features and Benefits
Main Features Benefits
Small in costs
„„ Most energy efficient rack server of its class „„ Clear reduction in energy costs
„„ Fujitsu ServerView™ suite and onboard remote management „„ Comprehensive and simplified management reduce time for
features (iRMC S3) enable centralized management standard administration tasks
Cost-optimized foundation
„„ Onboard dual gigabit LAN „„ Cost-optimized foundation for infrastructure and communication
„„ Up to 32GB RAM, up to 2 PCIe Gen2 and 1 PCIe Gen3 slots and up to applications
4 hard disk drives „„ Flexible to meet the individual demand
„„ Free choice: 2x 3.5 SATA/ SAS HDDs or 4x 2.5 SATA/SAS/SSD HDDs
Rich set of optional features
„„ Choice of Intel® Xeon® E3, Core™ i3, Celeron® and Pentium® „„ Perfectly meet the performance requirements with available budget
processors „„ Match redundancy requirements with available budget
„„ Modular RAID controllers
„„ Redundant fans
„„ Hot-plug and redundant power supply (PSU) with platinum
efficiency (94%)
Page 2 / 8 www.fujitsu.com/fts
3. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Technical details
PRIMERGY RX100 S7p
Storage drive architecture 3.5-inch SAS/SATA 3.5-inch SAS/SATA 2.5-inch SAS/SATA 2.5-inch SAS/SATA
Power supply Standard Hot-plug Standard Hot-plug
Mainboard
Mainboard type D 3034
Chipset Intel® C202
Processor quantity and type 1 x Intel® Celeron® processor / Intel® Core™ i3 processor / Intel® Xeon® processor E3 series
Processor Intel® Celeron® processor G530
(2C/2T, 2.40 GHz, TLC: 2 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Celeron® processor G550
(2C/2T, 2.60 GHz, TLC: 2 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Core™ i3-3220 processor
(2C/4T, 3.30 GHz, TLC: 3 MB, Turbo: No, 1600 MHz, 55 W)
Intel® Pentium® processor G640
(2C/2T, 2.80 GHz, TLC: 3 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Xeon® processor E3-1220Lv2
(2C/4T, 2.30 GHz, TLC: 3 MB, Turbo: Yes, 1600 MHz, 17 W)
Intel® Xeon® processor E3-1220v2
(4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Intel® Xeon® processor E3-1230v2
(4C/8T, 3.30 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Intel® Xeon® processor E3-1240v2
(4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Intel® Xeon® processor E3-1265Lv2
(4C/8T, 2.50 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 45 W)
Intel® Xeon® processor E3-1270v2
(4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Intel® Xeon® processor E3-1280v2
(4C/8T, 3.60 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Memory slots 4 (2 banks with 2 DIMMs each)
Memory slot type DIMM (DDR3) UDIMM
Memory capacity (min. - max.) 2 GB - 32 GB
Memory protection ECC
Memory notes Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered. Capacity
per channel has to be the same.
Memory options 2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
Interfaces
USB ports 7 x (2x front, 4x back, 1x internal for UFM)
Graphics (15-pin) 1 x VGA (15-pin)
Serial connection 1 x serial RS-232-C, usable for iRMC or system or shared
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Service LAN (RJ45) 1 x dedicated management LAN port for iRMC S3 (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Page 3 / 8 www.fujitsu.com/fts
4. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Interfaces
Status LEDs System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Onboard or integrated Controller
RAID controller Integrated RAID 0/1 or RAID 5/6 controller (option)
additional RAID controller options are described under Components RAID controller
SATA Controller Intel® C202, 1 port used for accessible drive
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
LAN Controller Intel® 82574L + Intel® 82579LM onboard, 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration), iSCSI and PXE-Boot
via LAN planned to be supported on both LoMs, WoL for Intel® 82574L only
Remote Management Controller Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Trusted Platform Module (TPM) optional TPM
Onboard or integrated Controller (Base unit specific)
RAID controller 4 port SATA with RAID 0/1/10 for HDDs 4 port SATA with RAID 0/1/10 for HDDs
SATA Controller 4-port SATA 3GB with RAID 0, 1 4-port SATA 3Gb with RAID 0, 1
SATA controller type notes for hot-plug SATA hard disks for hot-plug SATA hard disks
Slots
PCI-Express 3.0 x16 1 x Low profile max. length 175mm
PCI-Express 2.0 x1 (mech. x4) 1 x Low profile max. length 170mm
PCI-Express 2.0 x4 (mech. x8) 1 x Low profile (for Modular RAID only)
Slot Notes In configurations with Intel® Core™ i3 or Intel® Pentium® processors slots are operated with PCI-Express 2.0.
Drive bays
Storage drive bays 4x 2.5-inch hot-plug SAS/SATA or 2x 3.5-inch hot-plug SAS/SATA
Accessible drive bays 1 x 5.25/0.5-inch for CD-RW/DVD
1 x 3.5/0.5-inch for ServerView Local Service Panel or front VGA + front Service LAN
Drive bays (Base unit specific)
Number of fans 4
Fan notes 4 fans in combination with standard power supply or 5 fans in combination with hot-plug PSU base unit for 1+4
redundancy.
Operating panel
Operating buttons On/off switch
NMI button
Status LEDs System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Service display Optional:
ServerView Local Service Panel (LSP)
Page 4 / 8 www.fujitsu.com/fts
5. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
BIOS
BIOS features ROM based setup utility
Recovery BIOS
BIOS settings save and restore
Local BIOS update from USB device
Online update tools for main Windows and Linux versions
Local and remote update via ServerView Update Manager
Remote PXE boot support
Remote iSCSI boot support
Operating Systems and Virtualization Software
Operating system release link http://docs.ts.fujitsu.com/dl.aspx?id=d4ebd846-aa0c-478b-8f58-4cfbf3230473
Operating system notes VMware ESX hints:
- SATA RAID is not supported
- Storing virtual machines locally requires a SAS RAID Controller
- Onboard GbE is supported on one of the two ports
Support of other Linux derivatives on demand
Red Hat® certification starting with version 5.8 / 6.4.
Server Management
Standard
Option ServerView Suite - Deploy
SV Deployment Manager (full version)
ServerView Suite - Maintain
iRMC Advanced Pack incl. Advanced Video Redirection (AVR) and Remote Storage
ServerView Suite - Dynamize
SV Virtual-IO Manager (VIOM)
SV Resource Orchestrator Virtual Edition (ROR VE)
SV Resource Orchestrator Cloud Edition (ROR CE)
ServerView Suite - Integrate
SV Integration pack for Fujitsu ManageNow® solution
Server Management notes Regarding Operating System dependencies for ServerView Suite software Products see dedicated Product Data sheets.
Dimensions / Weight
Rack (W x D x H) 482.6 mm (Bezel) / 431mm (Body) x 572 x 42.5 mm
Mounting Depth Rack 557 mm
Height Unit Rack 1U
Mounting Cable depth rack 200 mm cable depth
Weight up to 14 kg
Weight notes Actual weight may vary depending on configuration
Rack integration kit Rack integration kit as option
Environmental
Operating ambient temperature 15 - 35°C
Operating relative humidity 10 - 85 % (non condensing)
Operating environment FTS 04230 – Guideline for Data Center (installation locations)
Operating environment Link http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Sound pressure (LpAm) 24/30 dB(A) (min / max idle), 28.5 / 53.5 db(A) (min / max operating)
Sound power (LWAd; 1B = 10dB) 3.7/4.3 B (min / max idle), 4.2 / 6.8 B (min / max operating)
Noise notes / description Noise emissions and operation modes depend on system configuration.
Electrical values
Power supply configuration 1x standard power supply or1x hot-plug power supply or 2x hot plug power supplies for redundancy
Standard power supply output 300 W (90% efficiency)
Hot-plug power supply output 450W (94% efficiency)
Hot-plug power supply redundancy Yes
Rated voltage range 100 V - 127 V / 200 V - 240 V
Rated frequency range 47 Hz - 63 Hz
Rated current max. 6A
Page 5 / 8 www.fujitsu.com/fts
6. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Electrical values
Rated current in basic configuration 1.8 A / 0.8 A (100V / 240V)
Active power (max. configuration) 193 W
Apparent power (max. configuration) 195 VA
Heat emission 694.8 kJ/h (658.5 BTU/h)
Compliance
Germany GS
Europe CE Class A *
USA/Canada CSAc/us
ULc/us
FCC Class A
Global CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
Japan VCCI
Russia GOST
South Korea KC
China CCC (AC-Adapter)
Australia/New Zealand C-Tick
Taiwan BSMI
Compliance notes There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Compliance link http://sp.ts.fujitsu.com/sites/certificates/
Components
Storage disks SSD SATA, 6 Gb/s, 400 GB, MLC, hot-plug, 2.5-inch, enterprise
SSD SATA, 6 Gb/s, 200 GB, MLC, hot-plug, 2.5-inch, enterprise
SSD SATA, 6 Gb/s, 100 GB, MLC, hot-plug, 2.5-inch, enterprise
HDD SATA, 6 Gb/s, 500 GB, 7200 rpm, hot-plug, 3.5-inch, economic
HDD SATA, 6 Gb/s, 500 GB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 6 Gb/s, 500 GB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SATA, 6 Gb/s, 250 GB, 7200 rpm, hot-plug, 3.5-inch, economic
HDD SATA, 6 Gb/s, 250 GB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SATA, 6 Gb/s, 3 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 6 Gb/s, 2 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 6 Gb/s, 1 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 6 Gb/s, 1 TB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SAS, 6 Gb/s, 900 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 600 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 600 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 450 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 450 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 146 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 73 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
Page 6 / 8 www.fujitsu.com/fts
7. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Optical drives Blu-ray Disc™ Triple Writer, (6x BD-ROM; 8x DVD; 24x CD), slimline, SATA I
DVD Super Multi, (8xDVD/DVD+RW, 6xDVD-RW, 5xDVD-RAM; 24xCD/CD-R, 16xCD-RW), slimline, SATA I
SCSI / SAS Controller SCSI Ctrl. 320 MBit/s 1x int /1x ext
SAS Ctrl. 6 Gbit/s 8 ports ext. PCIe Gen2 x8
SAS Ctrl. 3 Gbit/s 4 ports int. / 4 ports ext.
RAID Controller RAID 5/6 Ctrl., SAS/SATA 6 Gbit/s, Fujitsu RAID Ctrl SAS 6G 5/6 512MB (D2616), 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, Optional BBU (based on LSI SAS2108)
RAID 5/6 Ctrl., SAS/SATA 6 Gbit/s, Fujitsu RAID Ctrl SAS 6G 1GB (D3116), 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 1 GB, Optional FBU (based on LSI SAS2208)
RAID 0/1 Ctrl., SAS/SATA 6 Gbit/s, Fujitsu RAID Ctrl SAS 6G 0/1 (D2607), 8 ports int.
RAID level: 0, 1, 10, No BBU support (based on LSI SAS2008)
Integrated RAID 0/1 Ctrl., SAS/SATA 3 Gbit/s, 4 ports int.
RAID level: 0, 1, 1E, No BBU support (based on LSI 1064e)
Communication, Network Ethernet Ctrl. 1 x 1 Gbit/s PCIe x1 ( Intel® )
Ethernet Ctrl. 1 x 1 Gbit/s PCIe x4 ( Intel® )
Ethernet Ctrl. 2 x 10 Gbit/s PCIe x8 ( Fujitsu )
Ethernet Ctrl. 2 x 1 Gbit/s PCIe x4 ( Fujitsu )
Ethernet Ctrl. 4 x 1 Gbit/s PCIe x4 ( Fujitsu )
Graphics add on cards (optional) NVIDIA® Quadro® NVS 300 LP, PCIe x1, 2x DVI/VGA
Rack infrastructure Rack Mount Kit
Cable Arm 1U for PRIMECENTER- and 3rd-party racks
Warranty
Standard Warranty 1 year
Service level On-site Service (depending on country)
Maintenance and Support Services - the perfect extension
Recommended Service 7x24, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner.
Service Lifecycle 5 years
Service Weblink http://www.fujitsu.com/fts/services
Page 7 / 8 www.fujitsu.com/fts
9. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Data Sheet
Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack
server
Small in size and low in cost – rich in optional features
The PRIMERGY RX Rack Server family is the perfect operational costs. Furthermore, the ServerView™
platform to form dynamic infrastructures for your suite and remote management features (iRMC S3)
business processes today and in the coming simplify administration and enables centralized
decade. You will thus benefit several times over management for de-centralized installations.
from our recognized experience in optimized
data center technology and our innovative
strength in developing energy-efficient and cost/
performance-optimized rack systems for universal
use. PRIMERGY rack servers, built upon industry
standards, focus from a functional viewpoint
on core features: energy efficiency, reliability,
optimized for virtualization, ease of operation
and maintenance, flexibility for your future. And
thus they notably meet your requirements for
outstanding cost efficiency. Optimal operating
costs and long-term usability comply with
the IT quality required by your customers. Our
responsibility goes way beyond the hardware as
our tailor-made service packages mean that you
can rely on the best support for your IT during its
whole lifecycle.
PRIMERGY RX100 S7p
The Fujitsu PRIMERGY RX100 S7 is an entry
mono socket Intel® x86 rack server designed to
provide a solution for small budgets, yet enabling
a rich set of optional expansions to best meet
individual demands. Its usage patterns cover
infrastructure and communication applications
by delivering up to 32GB RAM, up to 3 PCIe slots
and up to 4 hard disk drives. Moreover, this 1U
server enables individual configuration with a
rich set of optional features, such as hot-plug
94% efficient power supply units, redundant fan,
RAID controller and the choice of Intel® Xeon®
E3, Intel® Core® and Intel® Celeron® processors.
By delivering the highest energy efficiency of its
class, the RX100 S7 also contributes to the lowest
Page 1 / 8 www.fujitsu.com/fts
10. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Features and Benefits
Main Features Benefits
Small in costs
„„ Most energy efficient rack server of its class „„ Clear reduction in energy costs
„„ Fujitsu ServerView™ suite and onboard remote management „„ Comprehensive and simplified management reduce time for
features (iRMC S3) enable centralized management standard administration tasks
Cost-optimized foundation
„„ Onboard dual gigabit LAN „„ Cost-optimized foundation for infrastructure and communication
„„ Up to 32GB RAM, up to 2 PCIe Gen2 and 1 PCIe Gen3 slots and up to applications
4 hard disk drives „„ Flexible to meet the individual demand
„„ Free choice: 2x 3.5 SATA/ SAS HDDs or 4x 2.5 SATA/SAS/SSD HDDs
Rich set of optional features
„„ Choice of Intel® Xeon® E3, Core™ i3, Celeron® and Pentium® „„ Perfectly meet the performance requirements with available budget
processors „„ Match redundancy requirements with available budget
„„ Modular RAID controllers
„„ Redundant fans
„„ Hot-plug and redundant power supply (PSU) with platinum
efficiency (94%)
Page 2 / 8 www.fujitsu.com/fts
11. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Technical details
PRIMERGY RX100 S7p
Storage drive architecture 3.5” SAS/SATA 3.5” SAS/SATA 2.5” SAS/SATA 2.5” SAS/SATA
Power supply Standard Hot-plug Standard Hot-plug
Mainboard
Mainboard type D 3034
Chipset Intel® C202
Processor quantity and type 1 x Intel® Celeron® processor / Intel® Core™ i3 processor / Intel® Xeon® processor E3 series
Processor Intel® Celeron® processor G530
(2C/2T, 2.40 GHz, TLC: 2 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Celeron® processor G550
(2C/2T, 2.60 GHz, TLC: 2 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Pentium® processor G640
(2C/2T, 2.80 GHz, TLC: 3 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Xeon® processor E3-1220Lv2
(2C/4T, 2.30 GHz, TLC: 3 MB, Turbo: Yes, 1600 MHz, 17 W)
Intel® Xeon® processor E3-1220v2
(4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Intel® Xeon® processor E3-1230v2
(4C/8T, 3.30 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Intel® Xeon® processor E3-1240v2
(4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Intel® Xeon® processor E3-1265Lv2
(4C/8T, 2.50 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 45 W)
Intel® Xeon® processor E3-1270v2
(4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Intel® Xeon® processor E3-1280v2
(4C/8T, 3.60 GHz, TLC: 8 MB, Turbo: Yes, 1600 MHz, 69 W)
Memory slots 4 (2 banks with 2 DIMMs each)
Memory slot type DIMM (DDR3) UDIMM
Memory capacity (min. - max.) 2 GB - 32 GB
Memory protection ECC
Memory notes Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered. Capacity
per channel has to be the same.
Memory options 2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
Interfaces
USB ports 7 x (2x front, 4x back, 1x internal for UFM)
Graphics (15-pin) 1 x VGA (15-pin)
Serial connection 1 x serial RS-232-C, usable for iRMC or system or shared
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Service LAN (RJ45) 1 x dedicated management LAN port for iRMC S3 (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Page 3 / 8 www.fujitsu.com/fts
12. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Interfaces
Status LEDs System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Onboard or integrated Controller
RAID controller Integrated RAID 0/1 or RAID 5/6 controller (option)
See under Components RAID controller
SATA Controller Intel® C202, 1 port used for accessible drive
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
LAN Controller Intel® 82574L + Intel® 82579LM onboard, 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration), iSCSI and PXE-Boot
via LAN planned to be supported on both LoMs, WoL for Intel® 82574L only
Remote Management Controller Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Trusted Platform Module (TPM) optional TPM
Onboard or integrated Controller (Base unit specific)
RAID controller 4 port SATA with RAID 0/1/ 10 for HDDs 4 port SATA with RAID 0/1/ 10 for HDDs
SATA Controller 4-port SATA 3GB with RAID 0, 1 4-port SATA 3Gb with RAID 0, 1
SATA controller type notes for hot-plug SATA hard disks for hot-plug SATA hard disks
Slots
PCI-Express 3.0 x16 1 x Low profile max. length 175mm
PCI-Express 2.0 x1 (mech. x4) 1 x Low profile max. length 170mm
PCI-Express 2.0 x4 (mech. x8) 1 x Low profile (for Modular RAID only)
Slot Notes In configurations with Intel® Core™ i3 or Intel® Pentium® processors slots are operated with PCI-Express 2.0.
Storage drive bays 4x 2.5-inch hot-plug SAS/SATA or 2x 3.5-inch hot-plug SAS/SATA
Accessible drive bays 1 x 5.25/0.5-inch for CD-RW/DVD
1 x 3.5/0.5-inch for ServerView Local Service Panel or front VGA + front Service LAN
Drive bays (Base unit specific)
Number of fans 4
Fan notes 4 fans in combination with standard power supply or 5 fans in combination with hot-plug PSU base unit for 1+4
redundancy.
Operating panel
Operating buttons On/off switch
NMI button
Status LEDs System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Service display Optional:
ServerView Local Service Panel (LSP)
Page 4 / 8 www.fujitsu.com/fts
13. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
BIOS
BIOS features ROM based setup utility
Recovery BIOS
BIOS settings save and restore
Local BIOS update from USB device
Online update tools for main Windows and Linux versions
Local and remote update via ServerView Update Manager
Remote PXE boot support
Remote iSCSI boot support
Operating Systems and Virtualization Software
Operating system release link http://docs.ts.fujitsu.com/dl.aspx?id=a9e600b9-e4cb-4f48-aa41-632f69058421
Operating system notes VMware ESX hints:
- SATA RAID is not supported
- Storing virtual machines locally requires a SAS RAID Controller
- Onboard GbE is supported on one of the two ports
Support of other Linux derivatives on demand
Red Hat® certification starting with version 5.8 / 6.4.
Server Management
Standard
Option ServerView Suite - Deploy
SV Deployment Manager (full version)
ServerView Suite - Maintain
iRMC Advanced Pack incl. Advanced Video Redirection (AVR) and Remote Storage
ServerView Suite - Dynamize
SV Virtual-IO Manager (VIOM)
SV Resource Orchestrator Virtual Edition (ROR VE)
SV Resource Orchestrator Cloud Edition (ROR CE)
ServerView Suite - Integrate
SV Integration pack for Fujitsu ManageNow® solution
Server Management notes Regarding Operating System dependencies for ServerView Suite software Products see dedicated Product Data sheets.
Dimensions / Weight
Rack (W x D x H) 482.6 mm (Bezel) / 431mm (Body) x 572 x 42.5 mm
Mounting Depth Rack 557 mm
Height Unit Rack 1U
Mounting Cable depth rack 200 mm cable depth
Weight up to 14 kg
Weight notes Actual weight may vary depending on configuration
Rack integration kit Rack integration kit as option
Environmental
Operating ambient temperature 15 - 35°C
Operating relative humidity 10 - 85 % (non condensing)
Operating environment FTS 04230 – Guideline for Data Center (installation locations)
Operating environment Link http://docs.ts.fujitsu.com/dl.aspx?id=d4ebd846-aa0c-478b-8f58-4cfbf3230473
Sound pressure (LpAm) 24/30 dB(A) (min / max idle), 28.5 / 53.5 db(A) (min / max operating)
Sound power (LWAd; 1B = 10dB) 3.7/4.3 B (min / max idle), 4.2 / 6.8 B (min / max operating)
Noise notes / description May vary according to configuration
Electrical values
Power supply configuration 1x standard power supply or1x hot-plug power supply or 2x hot plug power supplies for redundancy
Standard power supply output 300 W (90% efficiency)
Hot-plug power supply output 450W (94% efficiency)
Hot-plug power supply redundancy Yes
Rated voltage range 100 V - 127 V / 200 V - 240 V
Rated frequency range 47 Hz - 63 Hz
Rated current max. 6A
Page 5 / 8 www.fujitsu.com/fts
14. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
Electrical values
Rated current in basic configuration 1.8 A / 0.8 A (100V / 240V)
Active power (max. configuration) 193 W
Apparent power (max. configuration) 195 VA
Heat emission 694.8 kJ/h (658.5 BTU/h)
Compliance
Germany GS
Europe CE Class A *
USA/Canada CSAc/us
ULc/us
FCC Class A
Global CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
Japan VCCI
Russia GOST
South Korea KC
China CCC
Australia/New Zealand C-Tick
Taiwan BSMI
Compliance notes There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Compliance link http://sp.ts.fujitsu.com/sites/certificates/
Components
Storage disks HDD SATA, 6 Gb/s, 500 GB, 7200 rpm, hot-plug, 3.5-inch, economic
HDD SATA, 6 Gb/s, 500 GB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 6 Gb/s, 500 GB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SATA, 6 Gb/s, 250 GB, 7200 rpm, hot-plug, 3.5-inch, economic
HDD SATA, 6 Gb/s, 250 GB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SATA, 6 Gb/s, 3 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 6 Gb/s, 2 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 6 Gb/s, 1 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 6 Gb/s, 1 TB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SAS, 6 Gb/s, 900 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 600 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 600 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 450 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 450 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 146 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 73 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
Optical drives Blu-ray Disc™ Triple Writer, (6x BD-ROM; 8x DVD; 24x CD), slimline, SATA I
DVD Super Multi, (8xDVD/DVD+RW, 6xDVD-RW, 5xDVD-RAM; 24xCD/CD-R, 16xCD-RW), slimline, SATA I
Page 6 / 8 www.fujitsu.com/fts
15. Data Sheet Fujitsu PRIMERGY RX100 S7p Mono socket 1 U rack server
SCSI / SAS Controller SCSI Ctrl. 320 MB 1x int /1x ext
SAS Ctrl. 6 Gb 8 ports ext. PCIe Gen2 x8
SAS Ctrl. 3 Gb 4 ports int. / 4 ports ext.
RAID Controller RAID 5/6 Ctrl., SAS/SATA 6 Gb, Fujitsu RAID Ctrl SAS 6G 5/6 512MB (D2616), 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, Optional BBU (based on LSI SAS2108)
RAID 0/1 Ctrl., SAS/SATA 6 Gb, Fujitsu RAID Ctrl SAS 6G 0/1 (D2607), 8 ports int.
RAID level: 0, 1, 10, No BBU support (based on LSI SAS2008)
Integrated RAID 0/1 Ctrl., SAS/SATA 3 Gb, 4 ports int.
RAID level: 0, 1, 1E, No BBU support (based on LSI 1064e)
LAN Controller Ethernet Ctrl. 1 x 1 Gb Intel® Gigabit CT Desktop Adapter
Ethernet Ctrl. 1 x 1 Gb Intel® PRO/1000 PF Server Adapter
Ethernet Ctrl. 2 x 10 Gb Fujitsu Eth Ctrl 2x10Gbit PCIe x8 D2755 SFP+ lp
Ethernet Ctrl. 2 x 1 Gb Fujitsu Eth Ctrl 2x1Gbit PCIe x4 D2735-2 Cu
Ethernet Ctrl. 4 x 1 Gb Fujitsu Eth Ctrl 4x1Gbit PCIe x4 D2745 Cu
Rack infrastructure Cable Arm 1U for PRIMECENTER- and 3rd-party racks
Warranty
Standard Warranty 1 year
Service level On-site Service (depending on country)
Maintenance and Support Services - the perfect extension
Recommended Service 7x24, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner.
Service Lifecycle 5 years
Service Weblink http://www.fujitsu.com/fts/services
Page 7 / 8 www.fujitsu.com/fts
17. Data Sheet Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server
Data Sheet
Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack
server
Small in size and low in cost – rich in optional features
The PRIMERGY RX Rack Server family is the perfect operational costs. Furthermore, the ServerView™
platform to form dynamic infrastructures for your suite and remote management features (iRMC S3)
business processes today and in the coming simplify administration and enables centralized
decade. You will thus benefit several times over management for de-centralized installations.
from our recognized experience in optimized
data center technology and our innovative
strength in developing energy-efficient and cost/
performance-optimized rack systems for universal
use. PRIMERGY rack servers, built upon industry
standards, focus from a functional viewpoint
on core features: energy efficiency, reliability,
optimized for virtualization, ease of operation
and maintenance, flexibility for your future. And
thus they notably meet your requirements for
outstanding cost efficiency. Optimal operating
costs and long-term usability comply with
the IT quality required by your customers. Our
responsibility goes way beyond the hardware as
our tailor-made service packages mean that you
can rely on the best support for your IT during its
whole lifecycle.
PRIMERGY RX100 S7
The Fujitsu PRIMERGY RX100 S7 is an entry
mono socket Intel® x86 rack server designed to
provide a solution for small budgets, yet enabling
a rich set of optional expansions to best meet
individual demands. Its usage patterns cover
infrastructure and communication applications
by delivering up to 32GB RAM, up to 3 PCIe slots
and up to 4 hard disk drives. Moreover, this 1U
server enables individual configuration with a
rich set of optional features, such as hot-plug
94% efficient power supply units, redundant fan,
RAID controller and the choice of Intel® Xeon®
E3, Intel® Core® and Intel® Celeron® processors.
By delivering the highest energy efficiency of its
class, the RX100 S7 also contributes to the lowest
Page 1 / 8 www.fujitsu.com/fts
18. Data Sheet Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server
Features and Benefits
Main Features Benefits
Small in costs
„„ Most energy efficient rack server of its class „„ Clear reduction in energy costs
„„ Fujitsu ServerView™ suite and onboard remote management „„ Comprehensive and simplified management reduce time for
features (iRMC S3) enable centralized management standard administration tasks
Cost-optimized foundation
„„ Onboard dual gigabit LAN „„ Cost-optimized foundation for infrastructure and communication
„„ Up to 32GB RAM, up to 3 PCIe Gen2 slots and up to 4 hard disk applications
drives „„ Flexible to meet the individual demand
„„ Free choice: 2x 3.5 SATA/ SAS HDDs or 4x 2.5 SATA/SAS/SSD HDDs
Rich set of optional features
„„ Choice of Intel® Xeon® E3, Core™ i3, Celeron® and Pentium® „„ Perfectly meet the performance requirements with available budget
processors „„ Match redundancy requirements with available budget
„„ Modular RAID controllers
„„ Redundant fans
„„ Hot-plug and redundant power supply (PSU) with platinum
efficiency (94%)
Page 2 / 8 www.fujitsu.com/fts
19. Data Sheet Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server
Technical details
PRIMERGY RX100 S7
Storage drive architecture 3.5” SAS/SATA 3.5” SAS/SATA 2.5” SAS/SATA 2.5” SAS/SATA
Power supply Standard Hot-plug Standard Hot-plug
Mainboard
Mainboard type D 3034
Chipset Intel® C202
Processor quantity and type 1 x Intel® Core™ i3 processor / Intel® Pentium® processor / Intel® Xeon® processor E3 series
Processor Intel® Celeron® processor G530
(2C/2T, 2.40 GHz, TLC: 2 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Celeron® processor G530T
(2C/2T, 2.00 GHz, TLC: 2 MB, Turbo: No, 1066 MHz, 35 W)
Intel® Core™ i3-2100 processor
(2C/4T, 3.10 GHz, TLC: 3 MB, Turbo: No, 1333 MHz, 65 W)
Intel® Core™ i3-2120 processor
(2C/4T, 3.30 GHz, TLC: 3 MB, Turbo: No, 1333 MHz, 65 W)
Intel® Pentium® processor G620
(2C/2T, 2.60 GHz, TLC: 3 MB, Turbo: No, 1066 MHz, 65 W)
Intel® Xeon® processor E3-1220
(4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: 3.40 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1220L
(2C/4T, 2.20 GHz, TLC: 3 MB, Turbo: 3.40 GHz, 1333 MHz, 20 W)
Intel® Xeon® processor E3-1230
(4C/8T, 3.20 GHz, TLC: 8 MB, Turbo: 3.60 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1240
(4C/8T, 3.30 GHz, TLC: 8 MB, Turbo: 3.70 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1260L
(4C/8T, 2.40 GHz, TLC: 8 MB, Turbo: 3.30 GHz, 1333 MHz, 45 W)
Intel® Xeon® processor E3-1270
(4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: 3.80 GHz, 1333 MHz, 80 W)
Intel® Xeon® processor E3-1280
(4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: 3.90 GHz, 1333 MHz, 95 W)
Memory slots 4 (2 banks with 2 DIMMs each)
Memory slot type DIMM (DDR3) UDIMM
Memory capacity (min. - max.) 2 GB - 32 GB
Memory protection ECC
Memory notes Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered. Capacity
per channel has to be the same.
Memory options 2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
Interfaces
USB ports 7 x (2x front, 4x back, 1x internal for UFM)
Graphics (15-pin) 1 x VGA (15-pin)
Serial connection 1 x serial RS-232-C, usable for iRMC or system or shared
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Service LAN (RJ45) 1 x dedicated management LAN port for iRMC S3 (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Page 3 / 8 www.fujitsu.com/fts
20. Data Sheet Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server
Interfaces
Status LEDs System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Onboard or integrated Controller
RAID controller Integrated RAID 0/1 or RAID 5/6 controller (option)
See under Components RAID controller
SATA Controller Intel® C202, 1 port used for accessible drive
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
LAN Controller Intel® 82574L + Intel® 82579LM onboard, 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration), iSCSI and PXE-Boot
via LAN planned to be supported on both LoMs, WoL for Intel® 82574L only
Remote Management Controller Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Trusted Platform Module (TPM) optional TPM
Onboard or integrated Controller (Base unit specific)
RAID controller 4 port SATA with RAID 0/1/ 10 for HDDs 4 port SATA with RAID 0/1/ 10 for HDDs
SATA Controller 4-port SATA 3GB with RAID 0, 1 4-port SATA 3Gb with RAID 0, 1
SATA controller type notes for hot-plug SATA hard disks for hot-plug SATA hard disks
Slots
PCI-Express 2.0 x1 (mech. x4) 1 x Low profile max. length 170mm
PCI-Express 2.0 x4 (mech. x8) 1 x Low profile (for Modular RAID only)
PCI-Express 2.0 x16 1 x Low profile max. length 175mm
Storage drive bays 4x 2.5-inch hot-plug SAS/SATA or 2x 3.5-inch hot-plug SAS/SATA
Accessible drive bays 1 x 5.25/0.5-inch for CD-RW/DVD
1 x 3.5/0.5-inch for ServerView Local Service Panel or front VGA + front Service LAN
Drive bays (Base unit specific)
Number of fans 4
Fan notes 4 fans in combination with standard power supply or 5 fans in combination with hot-plug PSU base unit for 1+4
redundancy.
Operating panel
Operating buttons On/off switch
NMI button
Status LEDs System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Service display Optional:
ServerView Local Service Panel (LSP)
Page 4 / 8 www.fujitsu.com/fts
21. Data Sheet Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server
BIOS
BIOS features ROM based setup utility
Recovery BIOS
BIOS settings save and restore
Local BIOS update from USB device
Online update tools for main Windows and Linux versions
Local and remote update via ServerView Update Manager
Remote PXE boot support
Remote iSCSI boot support
Operating Systems and Virtualization Software
Operating system release link http://docs.ts.fujitsu.com/dl.aspx?id=a9e600b9-e4cb-4f48-aa41-632f69058421
Operating system notes VMware ESX hints:
- SATA RAID is not supported
- Storing virtual machines locally requires a SAS RAID Controller
- Onboard GbE is supported on one of the two ports
Support of other Linux derivatives on demand
Server Management
Standard
Option ServerView Suite - Deploy
SV Deployment Manager (full version)
ServerView Suite - Maintain
iRMC Advanced Pack incl. Advanced Video Redirection (AVR) and Remote Storage
ServerView Suite - Dynamize
SV Virtual-IO Manager (VIOM)
SV Resource Orchestrator Virtual Edition (ROR VE)
SV Resource Orchestrator Cloud Edition (ROR CE)
ServerView Suite - Integrate
SV Integration pack for Fujitsu ManageNow® solution
Server Management notes Regarding Operating System dependencies for ServerView Suite software Products see dedicated Product Data sheets.
Dimensions / Weight
Rack (W x D x H) 482.6 mm (Bezel) / 431mm (Body) x 572 x 42.5 mm
Mounting Depth Rack 557 mm
Height Unit Rack 1U
Mounting Cable depth rack 200 mm cable depth
Weight up to 14 kg
Weight notes Actual weight may vary depending on configuration
Rack integration kit Rack integration kit as option
Environmental
Operating ambient temperature 15 - 35°C
Operating relative humidity 10 - 85 % (non condensing)
Operating environment FTS 04230 – Guideline for Data Center (installation locations)
Operating environment Link http://docs.ts.fujitsu.com/dl.aspx?id=d4ebd846-aa0c-478b-8f58-4cfbf3230473
Sound pressure (LpAm) 24/30 dB(A) (min / max idle), 28.5 / 53.5 db(A) (min / max operating)
Sound power (LWAd; 1B = 10dB) 3.7/4.3 B (min / max idle), 4.2 / 6.8 B (min / max operating)
Noise notes / description May vary according to configuration
Electrical values
Power supply configuration 1x standard power supply or1x hot-plug power supply or 2x hot plug power supplies for redundancy
Standard power supply output 300 W (90% efficiency)
Hot-plug power supply output 450W (94% efficiency)
Hot-plug power supply redundancy Yes
Rated voltage range 100 V - 127 V / 200 V - 240 V
Rated frequency range 47 Hz - 63 Hz
Rated current max. 6A
Rated current in basic configuration 1.8 A / 0.8 A (100V / 240V)
Page 5 / 8 www.fujitsu.com/fts
22. Data Sheet Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server
Electrical values
Active power (max. configuration) 193 W
Apparent power (max. configuration) 195 VA
Heat emission 694.8 kJ/h (658.5 BTU/h)
Compliance
Germany GS
Europe CE Class A *
USA/Canada CSAc/us
ULc/us
FCC Class A
Global CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
Japan VCCI
Russia GOST
China CCC
Australia/New Zealand C-Tick
Taiwan BSMI
Compliance notes There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Compliance link http://sp.ts.fujitsu.com/sites/certificates/
Components
Storage disks HDD SATA, 6 Gb/s, 500 GB, 7200 rpm, hot-plug, 3.5-inch, economic
HDD SATA, 6 Gb/s, 250 GB, 7200 rpm, hot-plug, 3.5-inch, economic
HDD SATA, 3 Gb/s, 500 GB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 500 GB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SATA, 3 Gb/s, 250 GB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SATA, 3 Gb/s, 2 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 1 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 1 TB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SAS, 6 Gb/s, 900 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 600 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 600 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 450 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 450 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 146 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 73 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
Optical drives Blu-ray Disc™ Triple Writer, (6x BD-ROM; 8x DVD; 24x CD), slimline, SATA I
DVD Super Multi, (8xDVD/DVD+RW, 6xDVD-RW, 5xDVD-RAM; 24xCD/CD-R, 16xCD-RW), slimline, SATA I
Page 6 / 8 www.fujitsu.com/fts
23. Data Sheet Fujitsu PRIMERGY RX100 S7 Mono socket 1 U rack server
SCSI / SAS Controller SCSI Ctrl. 320 MB 1x int /1x ext
SAS Ctrl. 6 Gb 8 ports ext. PCIe Gen2 x8
SAS Ctrl. 3 Gb 4 ports int. / 4 ports ext.
RAID Controller RAID 5/6 Ctrl., SAS/SATA 6 Gb, Fujitsu RAID Ctrl SAS 6G 5/6 512MB (D2616), 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, Optional BBU (based on LSI SAS2108)
RAID 0/1 Ctrl., SAS/SATA 6 Gb, Fujitsu RAID Ctrl SAS 6G 0/1 (D2607), 8 ports int.
RAID level: 0, 1, 10, No BBU support (based on LSI SAS2008)
Integrated RAID 0/1 Ctrl., SAS/SATA 3 Gb, 4 ports int.
RAID level: 0, 1, 1E, No BBU support (based on LSI 1064e)
LAN Controller Ethernet Ctrl. 1 x 1 Gb Intel® Gigabit CT Desktop Adapter
Ethernet Ctrl. 1 x 1 Gb Intel® PRO/1000 PF Server Adapter
Ethernet Ctrl. 2 x 10 Gb Fujitsu Eth Ctrl 2x10Gbit PCIe x8 D2755 SFP+ lp
Ethernet Ctrl. 2 x 1 Gb Fujitsu Eth Ctrl 2x1Gbit PCIe x4 D2735-2 Cu
Ethernet Ctrl. 4 x 1 Gb Fujitsu Eth Ctrl 4x1Gbit PCIe x4 D2745 Cu
Graphics add on cards (optional) NVIDIA® Quadro® NVS 300 LP, PCIe x1, 2x DVI/VGA
Rack infrastructure Cable Arm 1U for PRIMECENTER- and 3rd-party racks
Warranty
Standard Warranty 1 year
Service level On-site Service (depending on country)
Maintenance and Support Services - the perfect extension
Recommended Service 7x24, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner.
Service Lifecycle 5 years
Service Weblink http://www.fujitsu.com/fts/services
Page 7 / 8 www.fujitsu.com/fts