The Dräger X-am 2500® was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O2, CO, NO2, SO2 and H2S. Reliable and fully mature measuring technology, durable sensors and easy handling guarantee a high degree
of safety with extremely low operating costs.
Draeger X-act 7000 lets you precisely measure gases in the low parts per billion (ppb) range on site. It's easy to use, simply insert the Draeger MicroTubes, begin measuring, results are displayed on the display. Gas detectable are Benzene, 1,3 Butadiene, Ethylene Oxide, Formaldehyde & finally Mercury for the first time.
The Dräger X-am 2500® was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O2, CO, NO2, SO2 and H2S. Reliable and fully mature measuring technology, durable sensors and easy handling guarantee a high degree
of safety with extremely low operating costs.
Draeger X-act 7000 lets you precisely measure gases in the low parts per billion (ppb) range on site. It's easy to use, simply insert the Draeger MicroTubes, begin measuring, results are displayed on the display. Gas detectable are Benzene, 1,3 Butadiene, Ethylene Oxide, Formaldehyde & finally Mercury for the first time.
The Drager Pac 6500 is the personal single-gas detection device with unlimited life and measures CO, H2S, SO2 or O2 quickly and precisely. Quick sensor response times and a powerful battery also ensure safety.
Draeger cataloger for fire & gas detection solution in region Australia, New Zealand, PNG & Pacific Islands. Please contact us for any further information.
Drager PointGard 2000 Series Gas Detection SystemFlow-Tech, Inc.
The Drager PointGard® 2000 series is a self-contained gas detection system for the continuous area monitoring of toxic or flammable gases in ambient air. PointGard® 2000’s rugged, water-resistant enclosure comes complete with a horn and strobes, a built-in power supply, and reliable DragerSensor®.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Dräger X-am 1700 Portable Gas Detector - Spec Sheet
1. DETECTION PERSONAL PROTECTION DIVING TECHNOLOGY SYSTEM TECHNOLOGY SERVICES
Dräger X-am 1700
The Dräger X-am 1700 is one of a new generation of 4-gas detectors which have
been specially designed for personal monitoring use. The instrument, which is gua-ranteed
to be repair-free, measures explosive gases and vapours, as well as O2, CO
and H2S, and is designed for a two-year lifespan. Its convenient mobile phone
dimensions and low weight make it the perfect companion for personal air monito-ring.
Equipped with reliable measurement technology, the Dräger X-am 1700 is the
An ergonomic instrument the size of a
mobile phone
The instrument's low weight and mobile
phone size – unique in today's market –
guarantee users a high level of comfort
and convenience. By design, the instru-ment
can be used intuitively thanks to the
practical two-button control panel and
straightforward menu guidance system.
Vapour-sensitive Ex measurement
For improved safety when facing unknown
hazards: the catalytic Ex sensor, calibrated
to methane, not only responds quickly to
explosive gases, but also offers a high level
of sensitivity to combustible organic
vapours, thus providing dependable war-nings
in the event of explosive hazards.
Precision electrochemical sensors
DrägerSensors stand for innovative techno-logy
at the highest level. The Dräger X-am
1700 features the latest series of powerful
electrochemical DrägerSensors from the
miniaturized XXS generation.
Robust and water-tight
The Dräger X-am 1700 is tough: water- and
dust-resistant to IP 67, the instrument
remains fully functional and ready for use
even after being dropped in water. The
integrated rubber protection and shock-proof
sensors ensure additional resistance
to impact and vibration. Furthermore, the
Dräger X-am 1700 is able to withstand
electromagnetic interference.
Gas inlets on two surfaces
Twice as reliable: the functional design
ensures that gas can enter the instrument
from the top and the front, so even if the
Dräger X-am 1700 is accidentally put in a
jacket pocket, it will still provide a reliable
warning against gas hazards.
A range of alarm functions
In alarm situations, the Dräger X-am 1700
provides three different types of warning:
the audible multi-tone alarm is impossible
to miss, while a visual 180-degree alarm
helps ensure the warning is not ignored.
Finally, the instrument also features a built-in
vibration alarm.
ideal low-cost solution.
ST-7202-2005
Dräger X-am 1700:
4-gas detector for two years of
personal air monitoring.
ST-1774-2005
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.heattracing.co.uk
www.thorneanderrick.co.uk
2. Flexible power supply
The Dräger X-am 1700 can be used with
either the standard alkaline or optional
NIMH batteries. In addition, it can be fit-ted
with a T4 battery which can be rechar-ged
while still inside the instrument.
Charging can take place in the workshop
or in a vehicle, to suit your needs.
Intelligent data management
Nothing escapes the Dräger X-am 1700:
the instrument is equipped as standard
with an event logger, which records
alarms, errors and results of function tests.
The data can be transmitted via infrared
interface to a PC and analysed using the
Dräger GasVision software.
Optimum solutions for function tests
and adjustments
Simple, fast and professional: from a func-tion
test to complete documentation, users
have a range of practical solutions to
choose from for total peace of mind. The
Dräger E-Cal automatic test and calibra-tion
station and the Dräger Bump Test
Station are ideal complements to the
instrument, saving time and minimizing
your workload.
User registration in seconds
An absolute must to ensure the right per-son
gets the right instrument: the optional
registration set, when used in conjunction
with the Dräger CC-Vision software, allows
individualized issue of instruments and a
quick check of completeness upon their
return.
For further information, visit:
www.draeger-safety.com/x-am
DRÄGER X-AM 1700
ST-1773-2005 Crocodile clip:
For secure attachment.
Visual alarm:
180° alarm.
DrägerSensors:
Fast and accurate.
Robust design:
Water- and dust-proof as per IP 67.
Large display:
All readings at a glance.
3. ORDER INFORMATION
Dräger X-am 1700 with a lifespan of two years and equipped 83 18 730
with an alkaline power supply and one sensor each for O2, EX, CO and H2S.
Power supply units
NiMH power supply unit T4 83 18 704
NiMH power supply unit T4 with charger module and power pack 83 18 785
Alkaline power supply unit T3/T4 (without alkaline batteries) 83 18 703
Alkaline batteries T4 (2 pcs.) for alkaline power supply 83 18 703 83 18 708
Chargers
Charger module 83 18 639
Power pack with connection cable (worldwide) 83 15 805
for several charger modules (20 max.)
Plug-in power pack (worldwide) 83 15 635
for several charger modules (2 max.)
12V/24V vehicle connection cable 83 12 645
for charger module
Vehicle holder for one charger module 83 18 779
Accessories for recording of measured values and configuration
Dräger GasVision 83 14 034
Dräger CC-Vision 64 08 515
USB DIRA cable 83 17 409
PC communication set 1 83 18 761
with USB port, Dräger CC-Vision incl. registration software
PC communication set 2 83 18 762
with USB port, Dräger CC-Vision incl. registration software and barcode reader
Calibration accessories
Calibration cradle 83 18 752
Dräger Bump Test Station 83 19 130
Dräger E-Cal module 83 18 754
Mixed gas cylinder, 2.5 vol.-% CH4; 50 ppm CO; 15 ppm H2S; 18 vol.-% O2 68 10 395
Other accessories
Instrument case 83 18 755
ST-7375-2005 ST-7415-2005
Dräger X-am 1700:
Robust and water-tight.
Dräger X-am 1700:
Compact and ergonomic.
4. TECHNICAL DATA
Dimensions (W x H x D) 47 x 129 x 31 mm (1.85” x 5.08” x 1.22”)
Weight approx. 220 g (7.8 oz)
Ambient conditions Temperature -20 to +50 °C (-4 to +122 °F)
Pressure 700 to 1300 mbar (20.7 to 38.4 inch Hg)
Humidity 10 to 95 % r.h.
Sensor Measurement range Response time T50 [sec.]
Ex 0-100 % LEL or 8
0-5 vol.-%
O2 0-25 vol.-% 6
CO 0-2000 ppm 6
H2S 0-200 ppm 6
IP protection class Instrument and sensor block, IP 67
Alarms Visual 180°
Audible Multi-tone >90 dB at 30 cm (1 ft.)
Vibration
Operating times Alkaline > 12 hours
T4 battery pack > 12 hours
Charging times < 4 hours
Event logger 65,000 events
Approvals* ATEX II 2G EEx ia d IIC T4/T3
I M2 EEx ia d I
UL Class I Div. 1 Group A, B, C, D T.-Code T4/T3
CSA Class I Div. 1 Group A, B, C, D T.-Code T4/T3
IECEx Ex ia d I/IIC T4/T3
CE-mark Electromagnetic compatibility (directive 89/336/EEC)
90 46 068 | PI | 115 | CR-PR-ED | Corporate Communications ST | Printed in Germany | chlorinefree – ecological | Subject to modifications!
*pending
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.heattracing.co.uk
www.thorneanderrick.co.uk
