A beaded safety pin night-light shade can be easily made using beads and safety pins strung together to add decorative lighting. The instructions recommend using crystal or glass beads so that light can pass through and create colorful effects. To make it, safety pins are strung with beads and connected together, then a wire is used to string the pins together top and bottom to form the shade shape. Once complete, it slips over a night-light bulb for decorative ambient lighting.

1. DIY Beaded Safety Pin Night-Light
Shade
https://www.fisherlight.com/
A beautiful beaded safety pin night-light shade can add a little
glamour to your plain and boring night-light. It is very easy to make
this style of night-light shade with beads and pins. It is
recommended to use crystal or glass beads to make a pin night-light
shade because they can allow light to pass through to create amazing
colors. Step to Make a Beaded Safety Pin Night-Light Shade
1. Prepare 13 safety pins and string with 6mm beads. You need to
prepare five 6mm beads for a 2-inch safety pin. Close the
safety pin. Then repeat these steps with the remaining 12
safety pins.
2. Use wire cutters to cut a piece of the jewelry to about a foot-
long length. String a rondelle bead onto the wire, and string
on the base of the first safety pin. Pass the wires through the
loop. Continue alternate beads and safety pins to sting all 13
safety pins together. Place this string of beads and safety
pins on a flat surface.
3. Pass another wire through the 8 mm bead, and through the other
end of the first safety pin. Continue to do to string 13 safety
pins together.
4. Put the ends of the wire pieces at the top together to twist
them into a knot. Use a wire cutter to trim the remaining
wires. Use the bottom wire to repeat this step.
5. Place your lampshade over the lightbulb of your night-light.