Digital Ink Rub Tester
•
0 likes•80 views
MCJ-01A Rub Tester is professionally applicable to the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument could effectively analyze the problems of poor abrasion resistance, ink layer falling off, lower printable force, and bad hardness of coating layers of printed materials.
Report
Share
Report
Share
Download to read offline
Recommended
Coefficient of Friction Testing Instrument 
MXD-01A Coefficient of Friction Tester is strictly based on ASTM D1894 standard, and is professional applicable to the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres. By testing the frictional properties of materials, the technical indexes could be controlled to meet requirements for production. Besides, the instrument can be used to measure smoothness of cosmetics, eye drops and other daily products.
Hot Tack Tester for plastic packaging
HTT-L1 Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
TDS F PSK3050.pdf
This technical data sheet provides information on PSK3050-Black and PSK3050-White polypropylene scrim kraft facing materials. It lists the composition including a black or white BOPP film, fiberglass yarn, LDPE adhesive, and kraft paper. It also provides values for properties such as basis weight, thickness, tensile strength, burst strength, water vapor permeability, and temperature resistance. Standard roll sizes are also specified along with storage instructions and a contact for the manufacturer.
MCJ-01A -Rub-Tester
The MCJ-01A Rub Tester from Labthink Instruments Co. is designed to test the abrasion resistance of surface coating layers on printed materials. It can effectively analyze problems like poor abrasion resistance, ink layer falling off, low printability, and hardness of coatings. The instrument precisely follows standard test method requirements and is controlled by a microcomputer with a convenient interface. It is used to test the abrasion resistance of ink layers on printed papers and photosensitive coating layers on boards.
Hot tack and heat seal strength tester htt l1
Labthink HTT-L1 Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
Friction / Peel Strength Tester
FPT-F1 Friction/Peel Tester can be used to test coefficients of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabric style test), metal-plastic composite strip/belt for communication cable, conveyor belt and textile, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper and protective films, and etc.
High temperature pressure sensor
Shaanxi Xinshion Instruments Co., ltd develops high temperature pressure sensors CYG161 and CYG163 that can operate at temperatures up to 125°C and 200°C respectively. These sensors use sensitive ceramic and polysilicon elements or sapphire manufacturing to withstand higher temperatures compared to common piezoresistive sensors. They broaden the application of pressure sensors to fields requiring medium temperature ranges such as aerospace, energy, mining, chemicals, and automation under special thermal and temperature conditions. The sensors offer customizable pressure ranges and interfaces to suit various applications.
Hardness Tester by ACMAS Technologies Pvt Ltd.
This document describes several models of hardness testers from ACMAS Technologies Pvt. Ltd. The models include the TMD 130, TMD 132, and TMD 134. All models share features like easy operation, direct display of hardness values, applicability to most metals, and ability to test at any angle. The models differ in their integrated impact devices, with the TMD 130 using a D impact device for normal testing, the TMD 132 using a C impact device for thin materials, and the TMD 134 using a DL impact device for grooves and teeth. The document provides specifications for each model including scales measured, accuracy, memory, maximum hardness tested, minimum workpiece dimensions, and more.
Recommended
Coefficient of Friction Testing Instrument
MXD-01A Coefficient of Friction Tester is strictly based on ASTM D1894 standard, and is professional applicable to the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres. By testing the frictional properties of materials, the technical indexes could be controlled to meet requirements for production. Besides, the instrument can be used to measure smoothness of cosmetics, eye drops and other daily products.
Hot Tack Tester for plastic packaging
HTT-L1 Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
TDS F PSK3050.pdf
This technical data sheet provides information on PSK3050-Black and PSK3050-White polypropylene scrim kraft facing materials. It lists the composition including a black or white BOPP film, fiberglass yarn, LDPE adhesive, and kraft paper. It also provides values for properties such as basis weight, thickness, tensile strength, burst strength, water vapor permeability, and temperature resistance. Standard roll sizes are also specified along with storage instructions and a contact for the manufacturer.
MCJ-01A -Rub-Tester
The MCJ-01A Rub Tester from Labthink Instruments Co. is designed to test the abrasion resistance of surface coating layers on printed materials. It can effectively analyze problems like poor abrasion resistance, ink layer falling off, low printability, and hardness of coatings. The instrument precisely follows standard test method requirements and is controlled by a microcomputer with a convenient interface. It is used to test the abrasion resistance of ink layers on printed papers and photosensitive coating layers on boards.
Hot tack and heat seal strength tester htt l1
Labthink HTT-L1 Hot Tack Tester is applicable in hot tack and heat seal performance tests for plastic film, laminated film and other packaging film. Meanwhile, it is applicable in peel, shear, tension and other test items for adhesive, adhesive tape, laminated film, plastic film, paper and other flexible materials.
Friction / Peel Strength Tester
FPT-F1 Friction/Peel Tester can be used to test coefficients of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabric style test), metal-plastic composite strip/belt for communication cable, conveyor belt and textile, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper and protective films, and etc.
High temperature pressure sensor
Shaanxi Xinshion Instruments Co., ltd develops high temperature pressure sensors CYG161 and CYG163 that can operate at temperatures up to 125°C and 200°C respectively. These sensors use sensitive ceramic and polysilicon elements or sapphire manufacturing to withstand higher temperatures compared to common piezoresistive sensors. They broaden the application of pressure sensors to fields requiring medium temperature ranges such as aerospace, energy, mining, chemicals, and automation under special thermal and temperature conditions. The sensors offer customizable pressure ranges and interfaces to suit various applications.
Hardness Tester by ACMAS Technologies Pvt Ltd.
This document describes several models of hardness testers from ACMAS Technologies Pvt. Ltd. The models include the TMD 130, TMD 132, and TMD 134. All models share features like easy operation, direct display of hardness values, applicability to most metals, and ability to test at any angle. The models differ in their integrated impact devices, with the TMD 130 using a D impact device for normal testing, the TMD 132 using a C impact device for thin materials, and the TMD 134 using a DL impact device for grooves and teeth. The document provides specifications for each model including scales measured, accuracy, memory, maximum hardness tested, minimum workpiece dimensions, and more.
Envision Tec Si500 Material
The envisionTEC SI 500 is a durable photopolymer material that produces highly accurate parts with fine detail and features. It has high impact resistance similar to thermoplastics, allowing for tough, complex parts to be built with a smooth surface finish. The material is ideal for applications in industries like medical, electronics, aerospace, and automotive that require temperature and humidity tolerant parts, as well as functional prototypes, snap fits, ducts, connectors, and more. It has mechanical properties like a tensile modulus of 2680 MPa and hardness of 85 Shore D, as well as a glass transition temperature of 61°C.
MXD-02-Coefficient-of-Friction-Tester
MXD-02 Coefficient of Friction Tester is applicable to the determination of static and kinetic coefficient of friction of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood and coatings.
Clamping Force Monitoring for Injection Molding Machines
Analog sensors can detect small changes in the length of tie bars in plastic injection molding machines, allowing continuous monitoring of clamping force without expensive instrumentation. The sensors measure elongation of up to 2mm as the tie bar stretches under hydraulic forces, providing feedback to prevent overload and protect molds. This lower cost solution improves machine performance and molded product quality by ensuring the clamping force is properly controlled.
App048 en measurement-system-cut-packaging-pieces
The document describes a laser-optical displacement sensor system used to measure cut packaging pieces. The system scans the surface of cardboard pieces to measure topography and determine groove, edge, and length measurements with high accuracy. It provides measurement results to correct production processes and ensure quality. Key features of the optoNCDT sensor include a 1mm measuring range, 0.3% accuracy, 1um resolution, and 10KHz bandwidth.
66kV Insulation Sleeve
This document provides information about Gala Thermo Shrink Pvt. Ltd., an Indian company that manufactures heat shrinkable tubes for insulating busbar systems up to 66KV. It lists the company's address and contact information and then describes the technical specifications of its extra heavy wall tube products for insulating busbars. The document outlines features like preventing corrosion and solving insulation issues. It also provides a table of properties for the tubes including mechanical, thermal, and electrical properties and the standards they meet.
Rongxin Company Cataloge
Dongguan Rongxin Silicone Technology Co.,Ltd is a polymer material manufacturer located in Dongguan, China that was founded in 1999. They produce a variety of silicone rubber products including condensation molding silicone rubber, platinum molding silicone rubber, life casting silicone rubber, shoe soles silicone rubber, condensation electronic potting silicone rubber, and addition electronic potting silicone rubber. Their products are of high quality and certified to various international standards.
HNT2510MT3R3 SPEC 20141201
This document provides specifications for an inductor component including:
- Isat will drop 30% from its value when a 2 second current is applied, and 45% from its momentary 1 second current value.
- Irms allows a maximum 40°C rise above a 25°C ambient temperature.
- Electrical characteristics include typical and maximum values for inductance, DCR, Isat, and Irms.
Ste db hsx90_rz1_rgb_en
This document provides information on the chemical composition, mechanical properties, microstructure, and processing of a high strength special steel product called HSX® 90, including:
- The chemical composition in terms of elements and their minimum and maximum mass percentages.
- Mechanical properties including minimum and maximum yield strength, tensile strength, and elongation.
- The microstructure consists of bainite and has an isotropic characteristic with a grain size greater than 6 based on ASTM standards.
- Processing notes that HSX® 90 is very well cold formable and can achieve a high strength and ductile microstructure in welded areas.
Datasheet of F9 Core
This document summarizes the material properties of a manganese-zinc ferrite material. It has a high initial permeability of 4400 and saturation flux of 380 mT. It is suitable for wideband and pulse transformers, filters, and interference suppression applications. The material is available in several core shapes including ring, E, EP, U, RM and pot cores.
Falling Dart Impact Tester
Windows menu interface and touch screen are convenient for the user to set test parameters quickly
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
RT-01-Rub-Tester
The RT-01 Rub Tester is a device for testing the abrasion resistance of surface coatings and printed materials. It has four test modes and can simultaneously test two specimens. The instrument conforms to industry testing standards and is controlled by a micro-computer interface. It is suitable for evaluating the abrasion resistance of paper, ink layers, and photosensitive coating materials.
Peel Strength Tester for Packaging Adhesives
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, other films and paper.
Disk Stripping Tester
BLJ-02 Disk Stripping Tester is professionally applicable to the ink fastness test of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coated films, surface coating and composite.
Thickness tester for plastic films and paper
The PARAM® CHY-CB Thickness Tester uses a mechanical contacting method to test thickness accurately according to various standards. It has manual or automatic modes, displays test data, and is designed for testing films, paper, foils, and other materials. The tester utilizes an embedded computer system for reliable operation and data management without a separate PC. It also has an intelligent software interface and supports a data sharing system for uniform management of test reports and results.
Benchtop thickness measurement device
The CHY-C2 Thickness Tester uses a mechanical contacting method to test thickness accurately and standardly. It can test a range of materials from 0-2 mm up to 12 mm, operates at 10 tests/min, and displays real-time data, statistics, and calibration information. The tester conforms to various industry standards and is applicable for precision thickness testing of plastics, paper, foil, and other materials.
Coefficient of Friction Measurement Device
MXD-01 Coefficient of Friction Tester is strictly based on GB 10006 standard, and is professional applicable to the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres. By testing the frictional properties of materials, the technical indexes could be controlled to meet requirements for production. Besides, the instrument can be used to measure smoothness of cosmetics, eye drops and other daily products.
Spec Sheet
This document provides technical specifications for the μQC Microscope. It has a vertical scan range of ≤ 500μm and vertical and lateral resolutions of ≤ 10nm and 0.13-2.21μm respectively. The microscope uses non-contact white light interferometry and has capabilities such as automatic depth, volume, and surface roughness measurements. It is suited for surface characterization of materials like ceramics and metals.
Nityanand gopalika digital radiography performance study
Presentation by Nityanand Gopalika on Digital Radiography Performance Study - paper presentaed at NDE 2003 conference.
Coefficient of Friction Tester
MXD-02 Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands. Besides, this tester is applicable to the smoothness measurement of cosmetics, eye drop and other daily chemistry.
Adhesive Tensile & Shear Tester
NLW-20 is professionally applicable to the determination of tensile, shearing, and pulling properties of various adhesives.
precise thickness tester
CHY-CA Thickness Tester is designed based on the mechanical contacting method, which effectively ensures standard and accurate test data and applicable to thickness test of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range.
网站
1. BOPP plain film is a clear, plain BOPP film with one corona treated side. It is widely used in packaging applications like printing, lamination, and aluminum metallization. It has properties like high transparency, tensile strength, grease barrier, and ink/coating adhesion. Thickness ranges from 12-45 microns and width from 350-1600mm.
2. The document discusses several types of films and papers including metallized films, tobacco films, copy paper, offset paper, and photo paper. It provides descriptions of each product including common applications, key properties, specifications, and parameters like thickness, width, brightness. Certifications and approvals are mentioned for some products
More Related Content
What's hot
Envision Tec Si500 Material
The envisionTEC SI 500 is a durable photopolymer material that produces highly accurate parts with fine detail and features. It has high impact resistance similar to thermoplastics, allowing for tough, complex parts to be built with a smooth surface finish. The material is ideal for applications in industries like medical, electronics, aerospace, and automotive that require temperature and humidity tolerant parts, as well as functional prototypes, snap fits, ducts, connectors, and more. It has mechanical properties like a tensile modulus of 2680 MPa and hardness of 85 Shore D, as well as a glass transition temperature of 61°C.
MXD-02-Coefficient-of-Friction-Tester
MXD-02 Coefficient of Friction Tester is applicable to the determination of static and kinetic coefficient of friction of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood and coatings.
Clamping Force Monitoring for Injection Molding Machines
Analog sensors can detect small changes in the length of tie bars in plastic injection molding machines, allowing continuous monitoring of clamping force without expensive instrumentation. The sensors measure elongation of up to 2mm as the tie bar stretches under hydraulic forces, providing feedback to prevent overload and protect molds. This lower cost solution improves machine performance and molded product quality by ensuring the clamping force is properly controlled.
App048 en measurement-system-cut-packaging-pieces
The document describes a laser-optical displacement sensor system used to measure cut packaging pieces. The system scans the surface of cardboard pieces to measure topography and determine groove, edge, and length measurements with high accuracy. It provides measurement results to correct production processes and ensure quality. Key features of the optoNCDT sensor include a 1mm measuring range, 0.3% accuracy, 1um resolution, and 10KHz bandwidth.
66kV Insulation Sleeve
This document provides information about Gala Thermo Shrink Pvt. Ltd., an Indian company that manufactures heat shrinkable tubes for insulating busbar systems up to 66KV. It lists the company's address and contact information and then describes the technical specifications of its extra heavy wall tube products for insulating busbars. The document outlines features like preventing corrosion and solving insulation issues. It also provides a table of properties for the tubes including mechanical, thermal, and electrical properties and the standards they meet.
Rongxin Company Cataloge
Dongguan Rongxin Silicone Technology Co.,Ltd is a polymer material manufacturer located in Dongguan, China that was founded in 1999. They produce a variety of silicone rubber products including condensation molding silicone rubber, platinum molding silicone rubber, life casting silicone rubber, shoe soles silicone rubber, condensation electronic potting silicone rubber, and addition electronic potting silicone rubber. Their products are of high quality and certified to various international standards.
HNT2510MT3R3 SPEC 20141201
This document provides specifications for an inductor component including:
- Isat will drop 30% from its value when a 2 second current is applied, and 45% from its momentary 1 second current value.
- Irms allows a maximum 40°C rise above a 25°C ambient temperature.
- Electrical characteristics include typical and maximum values for inductance, DCR, Isat, and Irms.
Ste db hsx90_rz1_rgb_en
This document provides information on the chemical composition, mechanical properties, microstructure, and processing of a high strength special steel product called HSX® 90, including:
- The chemical composition in terms of elements and their minimum and maximum mass percentages.
- Mechanical properties including minimum and maximum yield strength, tensile strength, and elongation.
- The microstructure consists of bainite and has an isotropic characteristic with a grain size greater than 6 based on ASTM standards.
- Processing notes that HSX® 90 is very well cold formable and can achieve a high strength and ductile microstructure in welded areas.
Datasheet of F9 Core
This document summarizes the material properties of a manganese-zinc ferrite material. It has a high initial permeability of 4400 and saturation flux of 380 mT. It is suitable for wideband and pulse transformers, filters, and interference suppression applications. The material is available in several core shapes including ring, E, EP, U, RM and pot cores.
Falling Dart Impact Tester
Windows menu interface and touch screen are convenient for the user to set test parameters quickly
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
What's hot (10)
Clamping Force Monitoring for Injection Molding Machines
Clamping Force Monitoring for Injection Molding Machines
Similar to Digital Ink Rub Tester
RT-01-Rub-Tester
The RT-01 Rub Tester is a device for testing the abrasion resistance of surface coatings and printed materials. It has four test modes and can simultaneously test two specimens. The instrument conforms to industry testing standards and is controlled by a micro-computer interface. It is suitable for evaluating the abrasion resistance of paper, ink layers, and photosensitive coating materials.
Peel Strength Tester for Packaging Adhesives
BLD-200N Auto Stripping Tester can be used for peeling, stripping and other performance tests of adhesives, adhesive tapes, pressure sensitive tapes, medical adhesive bandage, protective films, release paper, laminated films, leatheroid, woven bags, other films and paper.
Disk Stripping Tester
BLJ-02 Disk Stripping Tester is professionally applicable to the ink fastness test of plastic films and glass paper decorating printed materials that utilize the intaglio printing technique. It also could be used to test adhesion condition of surface layers formed by the technique of vacuum coated films, surface coating and composite.
Thickness tester for plastic films and paper
The PARAM® CHY-CB Thickness Tester uses a mechanical contacting method to test thickness accurately according to various standards. It has manual or automatic modes, displays test data, and is designed for testing films, paper, foils, and other materials. The tester utilizes an embedded computer system for reliable operation and data management without a separate PC. It also has an intelligent software interface and supports a data sharing system for uniform management of test reports and results.
Benchtop thickness measurement device
The CHY-C2 Thickness Tester uses a mechanical contacting method to test thickness accurately and standardly. It can test a range of materials from 0-2 mm up to 12 mm, operates at 10 tests/min, and displays real-time data, statistics, and calibration information. The tester conforms to various industry standards and is applicable for precision thickness testing of plastics, paper, foil, and other materials.
Coefficient of Friction Measurement Device
MXD-01 Coefficient of Friction Tester is strictly based on GB 10006 standard, and is professional applicable to the determination of static and kinetic coefficients of friction of plastic films, sheets, rubber, paper and paper board, PP woven bags, fabrics, metal-plastic composite belts for communication cables, convey belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres. By testing the frictional properties of materials, the technical indexes could be controlled to meet requirements for production. Besides, the instrument can be used to measure smoothness of cosmetics, eye drops and other daily products.
Spec Sheet
This document provides technical specifications for the μQC Microscope. It has a vertical scan range of ≤ 500μm and vertical and lateral resolutions of ≤ 10nm and 0.13-2.21μm respectively. The microscope uses non-contact white light interferometry and has capabilities such as automatic depth, volume, and surface roughness measurements. It is suited for surface characterization of materials like ceramics and metals.
Nityanand gopalika digital radiography performance study
Presentation by Nityanand Gopalika on Digital Radiography Performance Study - paper presentaed at NDE 2003 conference.
Coefficient of Friction Tester
MXD-02 Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials and tyres, and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands. Besides, this tester is applicable to the smoothness measurement of cosmetics, eye drop and other daily chemistry.
Adhesive Tensile & Shear Tester
NLW-20 is professionally applicable to the determination of tensile, shearing, and pulling properties of various adhesives.
precise thickness tester
CHY-CA Thickness Tester is designed based on the mechanical contacting method, which effectively ensures standard and accurate test data and applicable to thickness test of plastic films, sheets, diaphragms, paper, foils, silicon wafers and other materials within specified range.
网站
1. BOPP plain film is a clear, plain BOPP film with one corona treated side. It is widely used in packaging applications like printing, lamination, and aluminum metallization. It has properties like high transparency, tensile strength, grease barrier, and ink/coating adhesion. Thickness ranges from 12-45 microns and width from 350-1600mm.
2. The document discusses several types of films and papers including metallized films, tobacco films, copy paper, offset paper, and photo paper. It provides descriptions of each product including common applications, key properties, specifications, and parameters like thickness, width, brightness. Certifications and approvals are mentioned for some products
QS Metrology Private Limited, New Delhi
IndiaMART TrustSealWe bring you the latest technology in Dimensional Metrology from the world leaders such as Zeiss and Phynix, Germany as well as from our own Research & Development Department which has created world class products like Welding Inspection Systems, Video Measuring Systems, Metallurgical Image Analyzer, Profile Projector & Microscopes.
2008 tech Instrumentation in Precision Metrology
This document discusses instrumentation for precision metrology, focusing on needs in the flat panel display industry. It outlines approaches for reducing metrology errors, and provides examples of using new metrology tools in industry. Specifically, it describes using enhanced atomic force microscopy and interferometry to precisely measure microstructures in light guides, brightness enhancement films, and other components at the nanometer scale needed for advances in displays.
Pmma properties data sheet_ gevacril
This document provides technical properties of GEVACRIL acrylics in three categories: mechanical properties, optical properties, and thermal properties. It lists values for properties like specific weight, impact strength, tensile strength, elongation at break, light transmission, thermal conductivity, heat deflection temperature, and water absorption according to various industry standards. The properties are shown for cast and extruded acrylic sheet as well as polycarbonate for comparison. Notes explain the testing norms and standards used to obtain the property values.
4108 specification- www.ttbvs.com
The document describes a ground resistance tester product. It can measure grounding resistance, soil resistivity, equipotential bonding resistance, and interference parameters. It uses digital signal processing for high precision measurements and automatic interference avoidance. Measurement methods include using ground rods, selective poles, or without rods. It has a large LCD display, data logging, battery power, and meets various IEC standards.
Improvement of Surface Roughness of Nickel Alloy Specimen by Removing Recast ...
In this investigation, experimental work and computational work are combined to obtain
improvement in the surface roughness of nickel alloy specimen, the machining is carried out by means
of CNC wire electric discharge machining (WEDM). Brass wire is used as the tool electrode and nickel
alloy (Inconel600) is used as the work piece material. The machining parameters such as Pulse-On time
(Ton), Pulse-Off time (Toff), Peak Current (Ip), and Bed speed are considered as input parameters for this
project. Surface roughness and Recast layer are considered the output parameters. The experiments
with the pre-planned set of input parameters are designed based on Taguchi’s orthogonal array. The
surface roughness is measured using stylus type roughness tester and the thickness of the Recast layer
is measured using Scanning Electron Microscope (SEM). The results obtained from the experiments are
fed to the Minitab software and optimum input parameters for the desired output parameters are
identified. The software uses the concept of analysis of variance (ANOVA) and indicates the nature of
effect of input parameters on the output parameters and confirmation is done by validation
experiments. Once the recast layer thickness is obtained Chemical Etching and abrasive blasting is
performed in order to remove the recast layer and again the surface roughness is measured by using
stylus type roughness tester. Finally from the obtained results it was found that there was significant
improvement in the Surface roughness of the nickel alloy material. In addition using regression
analysis this work is stimulated by computational method and the results are obtained.
NanoMas_FlexTech
NanoMas Technologies produces silver and other metal nanoparticles using a patented process suitable for large-scale production. Their nanoparticles can be formulated into inks for various printing methods like gravure, inkjet, and aerosol jet printing to produce conductive patterns on flexible substrates. These patterns can be sintered at low temperatures below 180°C to achieve high conductivity comparable to pure metals. Applications demonstrated include solar cell metallization, printed sensors, and organic thin-film transistors.
Company presentation of victor 201602
Victor is a precision manufacturing company located in Jiangmen, China specializing in aluminum die casting, machining, and surface treatment. They have over 100,000 square meters of factory space and 600 employees. Their capabilities include die casting up to 500kg per hour, CNC machining with 200 machines, and anodizing, painting, and other surface treatments. Victor aims to provide consistent quality, reliable delivery, and early design involvement through their quality management system and experienced QC team.
Company presentation of victor 201602
Victor is a precision manufacturing company located in Jiangmen, China specializing in aluminum die casting, machining, and surface treatment. They have over 100,000 square meters of factory space and 600 employees. Their capabilities include die casting up to 500kg per hour, CNC machining with 200 machines, precision punching, painting, and anodizing surface treatments. Victor aims to provide consistent quality, reliable delivery, and early design involvement through their quality management system and experienced QC team.
Similar to Digital Ink Rub Tester (20)
Nityanand gopalika digital radiography performance study
Nityanand gopalika digital radiography performance study
Improvement of Surface Roughness of Nickel Alloy Specimen by Removing Recast ...
Improvement of Surface Roughness of Nickel Alloy Specimen by Removing Recast ...
More from Labthink Instruments Co., Ltd
1 oxygen permeability test method of pudding cups
This article introduces an oxygen transmission rate test method to test the pudding cup, i.e. the coulometric method. The test principle, instrument features, specifications, and testing procedures are all included in this article, which may provide reference for oxygen permeability test of packaging containers
1 oxygen permeability test method of pudding cups
This article introduces an oxygen transmission rate test method to test the pudding cup, i.e. the coulometric method. The test principle, instrument features, specifications, and testing procedures are all included in this article, which may provide reference for oxygen permeability test of packaging containers
1 oxygen permeability test method of pudding cups
This article introduces an oxygen transmission rate test method to test the pudding cup, i.e. the coulometric method. The test principle, instrument features, specifications, and testing procedures are all included in this article, which may provide reference for oxygen permeability test of packaging containers.
90 Degree Adhesive Peel Strength Test on a Tensile Testing Machine
This document shows a 90 degree adhesive peel strength test on a Labthink XLW (PC) Auto Tensile Tester. We fit the XLW(PC) with our 90 degree peel strength fixture and one vise grip on the bottom crosshead to hold the free end of the tape. The fixture has numerous tapped holes that allow you to clamp a multitude of various parts and substrates to the test bed. This test measures the maximum load and also the average load of adhesive tape bonded to a Polystyrene foam substrate.
Plastic film hot tack test
The i-Thermotek 2500 Hot Tack Tester can determine the hot tack and heat seal performance of plastic films, composite films, and other packaging materials. It can also test the peel strength and tensile properties of adhesives, tapes, and other flexible materials. The tester prepares specimens according to standards, mounts them in grips, sets test parameters, and records data from tests that measure properties like peel strength and tensile strength.
Plastic film hot tack test
The i-Thermotek 2500 Hot Tack Tester can determine the hot tack and heat seal performance of plastic films, composite films, and other packaging materials. It can also test the peel strength and tensile properties of adhesives, tapes, and other flexible materials. The tester prepares specimens according to standards, mounts them in grips, sets test parameters, and records data from tests that measure properties like peel strength and tensile strength.
Medical blister leak and seal strength test
i-Leaktek 6600 Leak and Seal Strength Tester is designed for determination of seal strength and seal performance test of various heat sealed flexible package and sterilized package, seal performance test of pilfer-proof closures, quantitative testing of leak characteristics, compression resistance, capsule disengaging strength, cap body joint strength, seal-edge seal strength and butting strength of flexible tubes, and testing of anti-compression, seal performance and burst resistance of the bottles.
Medical blister leak and seal strength test
The i-Leaktek 6600 Leak and Seal Strength Tester is designed to test the seal strength and performance of various flexible packages and sterilized packages. It can test leak characteristics, compression resistance, and burst resistance of bottles. The tester requires warming up for 30 minutes before mounting at least 5 specimen samples free of defects. Test parameters are then set and the test is run, with the results curve and report viewed afterwards.
Break force test of ampoule bottle
i-Meditek 1300 Medical Packaging Tester is designed to determine the puncture force of medical rubber closure, pullout force of rubber closure, break force of ampoule, sliding resistance of syringe, puncture force of syringe needle, connection force of syringe needle and needle hub, connection force of syringe needle hub and shield, seal performance of plastic blood bag, and the performance of other medical appliances.
Xlw (g6) auto tensile tester
The PARAM® XLW (G6) Auto Tensile Tester is a professional instrument that can perform a variety of tensile tests including tensile strength, deformation, peeling and tearing. It has 6 working stations, 1200mm extra-long stroke, and precision load cells that ensure accurate test results. The instrument is controlled via computer software which supports statistical analysis and management of test data. It is used to test properties of over 1000 materials including packaging, textiles, adhesive tapes and more.
Ft f1 fogging tester
The PARAM FT-F1 Fogging Tester is used to evaluate the fogging characteristics of volatile constituents in plastics, textiles, and other materials used in vehicles and aircraft under high temperature conditions. It has 6 test stations that can simultaneously test samples and controls. Test methods include heating samples and measuring changes in gloss, fogging, or condensed material weight on a cooled plate. The instrument conforms to international standards and is suited to testing fogging in vehicle interior parts, plastics, carpets, leather, insulation materials, and adhesive products.
Box Compression Tester
XYD-15K Box Compression Tester can be used to measure the compressive resistance, deformation and stacking capability of cartons, beehive crates, plastic tanks (for edible oil and mineral water), paper tanks, paper cases, IBC tanks and other packages.
Xyd 15 k
XYD-15K Box Compression Tester can be used to measure the compressive resistance, deformation and stacking capability of cartons, beehive crates, plastic tanks (for edible oil and mineral water), paper tanks, paper cases, IBC tanks and other packages.
Tensile strength at break tester
XLW (PC) Auto Tensile Tester is professionally applicable to the determination of force properties of various flexible packaging materials, with high precision (better than 0.5% of reading accuracy) and multiple test ranges. The instrument is designed with 7independent test modes and could perform tests at seven different test speeds to meet various test conditions. Intelligent software facilitates to operate the instrument and provides data analysis and comparison functions.
Tension and Elongation rate tester
1% of reading value effectively ensures the accuracy of test results
7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packages
Different ranges of load cells and 7 distinct test speeds to meet different test requirements
The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display
Material universal testing machine
Better than 0.5% of reading value effectively ensures accurate test results
Multiple testing modes are available, including tensile strength, deformation, peeling and tearing, etc.
Stress at defined elongation, elastic modulus and stress and strain etc. could be analyzed
1200mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate
Puncture strength tester for packaging
XLW (EC) Auto Tensile Tester can be used to measure tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force and low speed unwrapping force as well as other performance of plastic films, composite materials, soft package materials, plastic flexible tube, adhesives, adhesive tape, label stickers, medical plasters, release paper, protection films, combined caps, aluminum foil, diaphragm, back sheets, non-woven fabrics, rubber, and paper, and etc.
Tensile Tester
1% of reading value effectively ensures the accuracy of test results
2 independent test modes are available, including tensile strength and peeling force to meet the distinct requirements of users
3 kinds of testing data provided for each test i.e. Maximum Value, Minimum Value and Average Value. Group data analysis is also available.
Tensile strength testing machine for flexible materials
1% of reading value effectively ensures the accuracy of test results7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packagesDifferent ranges of load cells and 7 distinct test speeds to meet different test requirements
Water Vapor Transmission Rate Tester
This instrument is based on the humidity sensor method, and is professionally applicable to the water vapor transmission rate test of film specimens. It is equipped with three individual test dishes, and the testing process is completely automatic and conforms to international standards.
More from Labthink Instruments Co., Ltd (20)
90 Degree Adhesive Peel Strength Test on a Tensile Testing Machine
90 Degree Adhesive Peel Strength Test on a Tensile Testing Machine
Tensile strength testing machine for flexible materials
Tensile strength testing machine for flexible materials
Digital Ink Rub Tester
- 1. PARAM® MCJ-01A Rub Tester Yarina Gao trade5@labthink.cn MCJ-01A Rub Tester is professionally applicable to the abrasion resistance test of surface coating layers of printed materials, e.g. ink layer or photosensitive (PS) coating. This instrument could effectively analyze the problems of poor abrasion resistance, ink layer falling off, lower printable force, and bad hardness of coating layers of printed materials. Professional Technology This instrument is strictly designed according to standard requirements to ensure the accuracy of test data The instrument is controlled by micro-computer, with PVC operation panel, LCD and membrane switch, which is convenient for users to operate or view the test data Standard embedded rub panel ensures the even rub area and rub process is completely quiet Special design of power failure memory provides safe data operating environment Test Standards This test instrument conforms to the standard: GB/T 7706 Applications MCJ-01A Rub Tester is applicable to the determination of abrasion resistance of: Test the abrasion resistance of ink layers of printed materials and Paper Printing effectively analyze the problems of poor abrasion resistance and ink Materials Basic layer falling off Applications Test the abrasion resistance of photosensitive coating layers and Photosensitive Coating effectively analyze the problems of lower printing force of PS Layers boards. Technical Specifications Items Specifications Rub Pressure 20± N 0.2 Rub Speed 43 cpm Rub Area 155 mm (L) x50 mm (W) Rub Times 0~999 Specimen Size 230 mm(L) x50 mm(W) Power AC220V 50Hz Instrument Size 260 mm(L) x230 mm(W) x 360 mm(H) Net Weight 22 kg Labthink Instruments Co., Ltd.144 Wuyingshan Road, Jinan, P.R.China (250031) Phone: +86 -531-85068566 FAX: +86-531-85812140 w w w.labthinkinter n atio n al.co m.cn