6. The shuttle
• Operation controlled by sensors:
- Side for begin and end of the rail
- Front for pallet detection
- Top (4 piece) for pickup detection
• Safety bar at front and back
• Emergency stop
7. The shuttle
• 8-Led’s display in the front and back to show
current status
Leave Auto-Leave Collect Auto-Collect
Collect nr. Change side CountingPacking
Manual Control Battery Warning Battery Alarm Alarm
8. Remote control
• Multi functional
• LCD screen
• Easy to use
• Local language
• One remote to control
more shuttles
• Use in freezer possible
• Truck connection
possible
• Recharging from truck
or with adapter 220 v
9. Operation features:
• Leave pallet
Put the pallet with a truck on the shuttle rails.
With the “leave pallet” function, the shuttle
takes the pallet and moves it in until it reaches
the next free position in the channel and drops
the pallet.
By choice the pallets could be placed with- or
without a gap
10. Operation features :
• Auto leave pallet
Like function “leave pallet”, but now the
shuttle keeps on bringing pallets in channel in
repetition, until the channel is partly or
complete filled.
Note: truck detection required to avoid
collision between truck forks and the lifting
shuttle.
11. Operation features
• Collect pallet
The shuttle goes in the channel from the truck-
side and collects the first reached pallet in the
channel and brings it to the home position.
12. Operation features
• Auto-Collect
Like “Collect pallet” but the shuttle keeps
collecting until the channel is empty.
If the pallet in the home position is not
collected by the forklift truck, the shuttle will
wait behind this pallet.
When the channel is empty the shuttle will go
into parking mode and leaves the “auto
collect” mode
13. Operation features
• Collect number of pallets
Like “Auto -Collect pallet” but the shuttle
keeps collecting until a submitted number of
pallets in a channel has been reached.
Texo Application Shuttle
14. Operation features
• Change side
(“FiFo” principle)
By changing side, it is possible to change the
control from the A-side to the B-side of the
shuttle.
All commands can be submitted from the B-
side now.
With this feature, the First In - First Out
principle is possible.
15. Operation features
• Packing function
With the Pack function, it is possible to move
the pallets to the collecting side.
This is possible from A to B side in a FiFo
system as well as from the to the A side in a
LiFo system.
18. Operation features
• Manual control
In the manual control mode it
is possible to drive or lift the
shuttle manually with the
remote control.
Note: only used in case of emergency
19. Operation features
• Battery Warning
Blinks when the battery capacity is under
30%. Battery should be recharged soon
• Battery Alarm
Burns when the battery capacity is under
25%
Shuttle will return to home position and
further operation is ignored. Battery
should be recharged immediately.
20. Operation features
• Battery replacing
1. Lift the handles on the cover
2. Place the forks in the handles
3. Lift the battery-pack from the shuttle
21. Operation features
• Battery replacing
4. Place the battery-pack in the recharging table
5. Pickup the second (recharged) battery-pack
6. Place the recharged battery-pack in the shuttle
22. Operation features
• Alarm
At all errors the display will blink and
the shuttle will return in home position.
The description of the error will be
given on the display the remote
control.
23. Performance
• Travel speed: Empty : 1,0 -1,2 m/sec
Loaded : : 0,8-1,0 m/sec
• Acceleration : 0,5 m/s2
• Lifting time : 3 sec.
• Capacity (before recharging) the battery:
650 cycles at +20°C average
300 cycles at -30°C average
• Recharging time 3 – 4 hours with 220 volts 30 Ampere
• Time to replace the battery 3 to 4 minutes
• Max load up to 1550 kg
• Shuttles available for pallet dimensions:
1200 x 800, 1200 x 1000 and 1200 x 1200
(or a combination of this)