Download to read offline
Uploaded byIhsan Ibadurrahman
Developing a course outline
The document discusses the process of developing a course outline for English for Specific Purposes, focusing on dynamic design elements such as needs analysis, available materials, and prioritization criteria. It emphasizes the importance of a structured approach to teaching, where students build on previously acquired skills in a logical sequence. Key components include identifying skill areas, assessing learner needs, and organizing content to facilitate effective learning within a set timeframe.
More Related Content
Similar to Developing a course outline
More from Ihsan Ibadurrahman
Developing a course outline
- 1. DEVELOPING A COURSE OUTLINE Englishfor Specific Purpose ENGL 6202 By Ihsan Ibadurrahman (G1025429)
- 2. What does itentail? Coming up with a course design is a dynamic mix of juggling and Doing jigsaw puzzles.
- 3. What are thepieces to fit? Existing Needs Course / Analysis Available materials
- 4. JUST 111 Research Dunchurch IBF Scientist, india
- 5. Ordering: Criteria forprioritizing. Time One criterion that we may use it to “WHEN” the target events are needed Building block by learners. For example, at JUST, writing laboratory reports is moved from the last 2 weeks of semester to the seventh or eighth week. The idea of a building block is that using or learning a certain language Building confidence skills is dependent or others. Before learning “A” what will be needed? For instance: teaching passive requires students to be already familiar with to be.
- 6. Refer to p.166 Identifying skill areas • The next step is to break down target events and rhetorical awareness to skill areas to language. Skill areas • Writing a Order them good in terms of introduction • What is Target • Citing needed Event sources and first? attributing • What is a • Writing ideas building assignments • Writing in an block? academic • What style increases • Discussing confidence? data
- 7. Assessing and Evaluation Timetabling • Feedback to • Fit the materials aid learning into the available • Measure of Materials time competence • Influence from • Existing practical learning materials issues • Self-made
- 8. Parameters for CD Casestudies Outlining CD
Editor's Notes
- #2 Animated picture list with color text tabs(Intermediate)To reproduce the SmartArt effects on this page, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, double-click Horizontal Picture List (fifth row, second option from the left) to insert the graphic into the slide. Press and hold CTRL, and select the picture placeholder and text shape (top and bottom shape) in one of the objects. Under SmartArt Tools,on the Design tab, in the Create Graphic group, click Add Shape, and then click Add Shape After. Repeat this process one more time for a total of five picture placeholders and text shapes. Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 4.44”.In the Width box, enter 9.25”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all five text boxes in the graphic. On the Home tab, in the Font group, select Corbel from the Font list,and then enter 22 in the Font Size box.Select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following: Click ChangeColors, and then under Colorful click Colorful Range – Accent Colors 2 to 3 (second option from the left).Click More, and then under Best Match for Document click Moderate Effect (fourth option from the left).Select the rounded rectangle at the top of the graphic. Under SmartArtTools, on the Format tab, in the ShapeStyles group, click the arrow next to ShapeFill, and then under Theme Colors clickWhite, Background 1, Darker 35% (fifth row, first option from the left).Click each of the five picture placeholders in the SmartArt graphic, select a picture, and then click Insert.To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Advanced Animations group, click Animation Pane.On the slide, select the graphic. On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and under Entrance, click Float In.In the Animation group, click Effect Options, and under Sequence, click One by One. In the Timing group, in the Duration list, click 01.00.In the Animation Pane, click the double-arrow below the animation effect to expand the list of effects, then do the following to modify the list of effects:Select the first animation effect, and then do the following:On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and then click More Entrance Effects. In the Change Entrance Effects dialog box, under Moderate, click Basic Zoom.Click Effect Options, and under Zoom, click Out Slightly. In the Timing group, in the Start list, select With Previous.Also in the Timing group, in the Duration list, click 01.00.Press and hold CTRL, select the third, fifth, seventh, ninth, and 11th animation effects (effects for the text shapes), and then do the following:On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery and then click More Entrance Effects. In the Change Entrance Effects dialog box, under Basic, click Peek In, and then click OK. In the Animation group, click Effect Options, and underDirection, click From Top.In the Timing group, in the Duration list, click 01.00.Press and hold CTRL, select the second, fourth, sixth, eighth, and 10th animation effects (effects for the pictures). In the Timing group, in the Start list, selectAfter Previous.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 130, Green: 126, and Blue: 102.Select the last stop on the slider, and then do the following: In the Position box, enter 71%.Click the button next to Color, and then click Black, Text 1(first row, second option from the left).
- #3 Animated upward process arrow with colored bullets(Basic)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click Upward Arrow (eighth row, third option from the left), and then click OK to insert the graphic into the slide.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bulleted list below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)On the slide, select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Colorful click Colorful Range - Accent Colors 3 to 4 (third option from the left).Click More, and then under Best Match for Document click Intense Effect (fifth option from the left).On the Home tab, in the Font group, select Calibri from the Font list, and then select 24 from the Font Size list.Select the text in the first text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickOliveGreen, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the text in the second text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickAqua, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the text in the third text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickPurple, Accent 4, Darker 25% (fifth row, eighth option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Advanced Animations group, click Animation Pane.On the slide, select the graphic. On the Animations tab, in the Animation group, click the More arrow at the side of the Effects Gallery, and under Entrance, click Wipe.In the Animation group, click Effect Options and do the following:under Direction, click From Left.Under Sequence, click One by One.In the Timing group, do the following:In the Duration list, click 01.00.In the Start list, click With Previous.In the Animation Pane, click the double arrow under the wipe effect to expand the contents of the list of effects.Also in the Animation Pane, select the second wipe effect and then on the Animations tab, do the following:In the Animation group, click More, then click More Entrance Effects. In the Change Entrance Effect dialog box, under Exciting, click Curve Up, and then click OK.In the Timing group,in the Start list, select On Click. In the Timing group,in the Duration list, select 00.50.Also in the Animation Pane, select the third wipe effect and then on the Animations tab, do the following:In the Animation group, click More, then click More Entrance Effects. In the Change Entrance Effect dialog box, under Moderate, click Peek In, and then click OK.In the Animation group, click Effect Options and under Direction, click From Top.In the Timing group,do the following:In the Start list, select With Previous. In the Timing group,in the Duration list, select 00.50.In the Delay list, enter 00.50.Also in the Animation Pane, select the fourth wipe effect, and then on the Animations tab, do the following:In the Animation group, click More, then click More Entrance Effects. In the Change Entrance Effect dialog box, under Exciting, click Curve Up, and then click OK.In the Timing group,in the Start list, select On Click. In the Timing group,in the Duration list, select 00.50.Also in the Animation Pane, select the fifth wipe effect, and then on the Animations tab, do the following:In the Animation group, click the More arrow on the Effects Gallery, then click More Entrance Effects. In the Change Entrance Effect dialog box, under Moderate, click Peek In, and then click OK.In the Animation group, click Effect Options and under Direction, click From Top.In the Timing group,do the following:In the Start list, select With Previous. In the Timing group,in the Duration list, select 00.50.In the Delay list, enter 00.50.Also in the Animation Pane, select the sixth wipe effect, and then on the Animations tab, do the following:In the Animation group, click the More arrow on the Effects Gallery, then click More Entrance Effects. In the Change Entrance Effect dialog box, under Exciting, click Curve Up, and then click OK.In the Timing group,in the Start list, select On Click. In the Timing group,in the Duration list, select 00.50.Also in the Animation Pane, select the seventh wipe effect, and then on the Animations tab, do the following:In the Animation group, click the More arrow on the Effects Gallery, then click More Entrance Effects. In the Change Entrance Effect dialog box, under Moderate, click Peek In, and then click OK.In the Animation group, click Effect Options and under Direction, click From Top.In the Timing group,do the following:In the Start list, select With Previous. In the Timing group,in the Duration list, select 00.50.In the Delay list, enter 00.50.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Right (first row, fourth option from the left).Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows:Select the first stop on the slider, and do the following:In the Position box, enter 39%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Selectthe last stop on the slider, and do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click Olive Green, Accent 3, Lighter 60%(third row, seventh option from the left).To increase the size of the SmartArt graphic so that it spans the entire slide, do the following:On the slide, select the graphic. Point to the top right corner of the graphic border, until a two-headed arrow appears. Drag the top right corner of the graphic border into the top right corner of the slide. Point to the bottom left corner of the graphic border, until a two-headed arrow appears. Drag the bottom left corner of the graphic border into the bottom left corner of the slide.
- #4 Animated captions fade into view over forest background(Basic)To reproduce the rectangleon this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and then under Rectangle click Rounded Rectangle (second option from the left). On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 3.08”. In the Shape Width box, enter 4.33”.Under Drawing Tools, on the Format tab, in the Shapes Styles group, click the arrow next to Shape Outline, and then click No Outline.Under DrawingTools, on the Format tab, in the bottom right corner in the Shapes Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Angle box, enter 90.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).In the Transparency box, enter 25%.Select the next stop in the slider, and then do the following: In the Position box, enter 20%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).In the Transparency box, enter 69%.Also in the Format Shape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Outer click Offset Diagonal Bottom Left (first row, third option from the left), and then do the following:In the Transparency box, enter 72%.In the Size box, enter 100%.In the Blur box, enter 11.81 pt.In the Angle box, enter 141°.In the Distance box, enter 19.7 pt. Also in the Format Shape dialog box,click 3-D Format in the left pane, and then do the following in the 3-D Format pane:Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left). Next to Top, in the Width box, enter 7 pt, in the Height box, enter 7 pt.Under Surface, click the button next to Material, and then under Standard clickMetal (fourth option from the left). Click the button next to Lighting, and then under Neutral click Contrasting (second row, second option from the left). In the Angle box, enter 75°.On the slide, drag the rectangle near the bottom right corner. To reproduce the rectangle animation effects on this slide, do the following:On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click AddAnimation, point to Entrance,and then click More Entrance Effects. In the Add Entrance Effect dialog box, under Moderate,click Float Up. Also on the Animations tab, in the Timing group, do the following:in theStart list, selectWith Previous. In theDuration list, enter 02.00. To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter three lines of text with paragraph breaks in the text box. Select the text, and then on the Home tab, in the Font group, do the following:In the Font list, select Candara.In the Font Size list, select 28. Click the arrow next to Font Color,and then under Theme Colors click Aqua, Accent 5; Darker 50% (sixth row, ninth option from the left). On the Home tab, in the Paragraph group, click Align TextLeft to position the text left in the text box.On the slide, drag the text box onto the rectangle. To reproduce the text animation effects on this slide, do the following:On the slide, select the text box. On the slide, select the rectangle. On the Animations tab, in the Advanced Animation group, click AddAnimation, point to Entrance,and then click More Entrance Effects. In the Add Entrance Effect dialog box, under Moderate,click Float Down. Also on the Animations tab, in the Animation group, click the Show Additional Effect Options dialog box launcher. In the Float Down dialog box, do the following:On the Timing tab, in theStart box, selectWith Previous. In theDuration box, select1 seconds (Fast). On the Text Animation tab, in the Group text list, select By 1st Level Paragraphs.Also on the Animations tab, in the Advanced Animation group, click Animation Pane. In the Animation Pane, click the double arrow under the text animation effect to expand the list of effects, and then do the following:Select the first text animation effect in the list (descend effect for the first line of text). Click the arrow to the right of the selected effect, and then click Timing. In the Descend dialog box, on the Timing tab, in the Delay box, enter 1.Select the second text animation effect (descend effect for the second line of text). Click the arrow to the right of the selected effect, and then click Timing. In the Descend dialog box, on the Timing tab, do the following:In the Start list select WithPrevious.In the Delay box, enter 1.5.Select the third text animation effect (descend effect for the third line of text). Click the arrow to the right of the selected effect, and then click Timing. In the Descend dialog box, on the Timing tab, do the following:In the Start list select WithPrevious.In the Delay box, enter 2.To reproduce the background effects on this slide, do the following: On the Design tab, in the Background group, click the Format Background dialog box launcher.In the Format Background dialog box, click Fill in the left pane, select Picture or texture fill in the Fill pane, and then under Insert from click File.In the Insert Picture dialog box, select a picture, and then click Insert.