The document summarizes a professional 2-port AV transmitter called the AdderLink AV102T. It can transmit AV signals up to 300 meters and supports resolutions up to 1080p. It has RS-232 and USB ports to control connected receivers and draw power. The compact design allows it to fit into small spaces. It can be used to extend dual screen workstations or digital signage to remote displays.
8447779800, Low rate Call girls in Shivaji Enclave Delhi NCR
Datasheetalav102t
1. Digital Signage
Professional AV
Drive 2 professional dual screen receivers
from a miniaturised two port transmitter
ADDERLink AV102T
Professional 2 port AV transmitter with RS232 & USB power
PRODUCT IN BRIEF FEATURES
The ALAV102T is a highly compact AV Resolutions and cable lengths transmitter. moulded cables also reduce
Typical resolutions achievable include: cable clutter, keeping the device easily
transmitter that allow you to deliver accesable at all times.
professional quality AV content to 720p: 1280 x 720 x 60Hz at 300m.
ALAV100 series receivers. 1080p:1920 x 1200 x 60Hz at 100m. RS232 for disabling/re-enabling receiver
connections
The module connects to the video, Audio Using the onboard RS232 interface,
CD quality stereo audio is supported. individual transmission paths can be
USB, audio and RS232 ports of your disconnected allowing remote screens to
computer and then connects via CAT sleep, and wake on re-connection. This
5, 5e or 6 cabling to the ALAV100 EDID display information saves power and screen hours in use.
receivers, each of which can be located The module contains a default set of
up to 300 meters from the module. EDID information that supports display Using a KVM over IP device such as the
resolutions up to 1920x1080 @ 60Hz. AVX5016, you can directly control up
In addition, the module will check during to 32 individual transmission paths from
ALAV102T features RS232 control power up whether alternative EDID anywhere in the world.
allowing you to switch nodes on and information is available from the KVM
off using Adders display manager switch or extender that is connected to AV-KVM Port
software, or any RS232 control port A. If required, you can also harvest ALAV102T is the first ADDERLink
and store new EDID information from transmitter to feature AV-KVM ports.
application. These ports allow you to connect directly
your display (Read and Store).
to a KVM extender. This allows you to add
Power additional devices such as touch screens
The ALAV102T uses a USB port to and keyboards.
derive its power from the host computer,
dispensing with the need for a separate
power supply, thus simplifying installation.
The USB cable must always be connected
to a USB port on the computer that is
capable of providing up to 300mA.
Small footprint
The ALAV102T has been designed to
use minimal space around your host
systems, allowing you to neatly locate the
Experts in KVM Extender
Connectivity
Solutions Solutions