Curb-Tec Manufactured Products, Apr 2011
•Download as PPS, PDF•
1 like•225 views
Miscellaneous photos of Curb-Tec's small extrusion curb machines; the CT-900 and its big brother, the CT-3000.
Report
Share
Report
Share
Recommended
ML1612R With Different Attachments
The document describes the ML1612R machine as a multifunctional machine capable of lifting 16 tons at a load center of 1200 mm. It can fully operate inside standard containers, handle 20-foot containers from fork pockets, and lift to a height of 6 meters. The machine can be transported easily in a 20-foot container or swap body vehicle, and comes with different kinds of lifting attachments including coil handling attachments, a double forks system for efficiency, and special tools available upon request such as for snow/sand removal. It has increased capacity with bogie rollers and can perform container stuffing and handling. The machine is able to operate in confined places like ro-ro ships and comes with special long forks for
Curb Tec Products Snapshot Feb 2009
Curb-Tec Europe distributes Curb-Tec curb extrusion machines and Gomaco curb and gutter slip form machines, which are considered the best in their class. Curb-Tec was established in 1999 in the USA and has served customers in 16 countries, with machines designed to minimize downtime and deliver high quality products. The company represents these machines as well as Curbmate landscape curbing machines, Sullair air compressors, and Caterpillar and Olympian generators in Poland and some surrounding areas.
CT-3000 Demo for Warsaw ZDM, One Year On, May 2011
We showcased the CT-3000 on one of Warsaw's main streets for the local road authorities (ZDM) one year ago. They were impressed with the speed and looked forward to seeing the curb one year later after going through a Warsaw winter before fully accepting extrusion curbing on city projects. We periodically checked the curb and it held up fine. We look forward to discussing future possibilities with ZDM now that our extrusion method has proven reliable, less time-consuming and therefore less expensive. We're very excited about upcoming prospects!!!
CT-3000 Demo for Warsaw Local Road Authorities (ZDM), May 2010
We showcased the CT-3000 on one of Warsaw's main streets for the local road authorities (ZDM) one year ago today. They were impressed with the speed and looked forward to seeing the curb one year later after going through a Warsaw winter before fully accepting extrusion curbing on city projects. We have been periodically checking the curb and it's been holding up fine. We look forward to discussing future possibilities with ZDM and will post another slideshow with more photos as soon as possible.
CT-3000 Demo for Estonian Guests, 18 Mar 2011
Curb-Tec Europe did a demonstration for guests from Estonia on 18 Mar. The CT-3000 small extrusion curb machine was used to pour a curb over 6 cm tall horizontal rebar. Despite having a less-than-inspiring experience with another manufacturer`s machine, the owners of Betoontoode and Tasandusvalu were pleasantly surprised with the performance of the CT-3000, especially the relationship between the quality of the curb and the simplicity of the machine. Discussions are underway regarding them buying a CT-3000 to be used for a project in Finland calling for rebar.
CT-3000 Demo for Estonian Guests, 18 mar 2011
Curb-Tec Europe did a demonstration for guests from Estonia on 18 Mar. The CT-3000 small extrusion curb machine was used to pour a curb over 6 cm tall horizontal rebar. Despite having a less-than-inspiring experience with another manufacturer`s machine, the owners of Betoontoode and Tasandusvalu were pleasantly surprised with the performance of the CT-3000, especially the relationship between the quality of the curb and the simplicity of the machine. Discussions are underway regarding them buying a CT-3000 to be used for a project in Finland calling for rebar.
Curb Tec's Under-Guardrail Modification for the CT-3000
The auger housing can be modified in order for the CT-3000 to be able to pour conrete or asphat under guardrails.
Mikolajki 2010
International Christian Fellowship church members and Curb-Tec Europe co-owner Chris Hutchinson have been working with the Kowalewo Children's Home in Poland for several years, organizing activities and providing gifts and equipment for the children. For St. Nicholas Day in December 2010, they arranged crafts, cookie baking, carol singing and gift giving for the children. Chris thanked his business partners for their logistical support in making the event possible.
Recommended
ML1612R With Different Attachments
The document describes the ML1612R machine as a multifunctional machine capable of lifting 16 tons at a load center of 1200 mm. It can fully operate inside standard containers, handle 20-foot containers from fork pockets, and lift to a height of 6 meters. The machine can be transported easily in a 20-foot container or swap body vehicle, and comes with different kinds of lifting attachments including coil handling attachments, a double forks system for efficiency, and special tools available upon request such as for snow/sand removal. It has increased capacity with bogie rollers and can perform container stuffing and handling. The machine is able to operate in confined places like ro-ro ships and comes with special long forks for
Curb Tec Products Snapshot Feb 2009
Curb-Tec Europe distributes Curb-Tec curb extrusion machines and Gomaco curb and gutter slip form machines, which are considered the best in their class. Curb-Tec was established in 1999 in the USA and has served customers in 16 countries, with machines designed to minimize downtime and deliver high quality products. The company represents these machines as well as Curbmate landscape curbing machines, Sullair air compressors, and Caterpillar and Olympian generators in Poland and some surrounding areas.
CT-3000 Demo for Warsaw ZDM, One Year On, May 2011
We showcased the CT-3000 on one of Warsaw's main streets for the local road authorities (ZDM) one year ago. They were impressed with the speed and looked forward to seeing the curb one year later after going through a Warsaw winter before fully accepting extrusion curbing on city projects. We periodically checked the curb and it held up fine. We look forward to discussing future possibilities with ZDM now that our extrusion method has proven reliable, less time-consuming and therefore less expensive. We're very excited about upcoming prospects!!!
CT-3000 Demo for Warsaw Local Road Authorities (ZDM), May 2010
We showcased the CT-3000 on one of Warsaw's main streets for the local road authorities (ZDM) one year ago today. They were impressed with the speed and looked forward to seeing the curb one year later after going through a Warsaw winter before fully accepting extrusion curbing on city projects. We have been periodically checking the curb and it's been holding up fine. We look forward to discussing future possibilities with ZDM and will post another slideshow with more photos as soon as possible.
CT-3000 Demo for Estonian Guests, 18 Mar 2011
Curb-Tec Europe did a demonstration for guests from Estonia on 18 Mar. The CT-3000 small extrusion curb machine was used to pour a curb over 6 cm tall horizontal rebar. Despite having a less-than-inspiring experience with another manufacturer`s machine, the owners of Betoontoode and Tasandusvalu were pleasantly surprised with the performance of the CT-3000, especially the relationship between the quality of the curb and the simplicity of the machine. Discussions are underway regarding them buying a CT-3000 to be used for a project in Finland calling for rebar.
CT-3000 Demo for Estonian Guests, 18 mar 2011
Curb-Tec Europe did a demonstration for guests from Estonia on 18 Mar. The CT-3000 small extrusion curb machine was used to pour a curb over 6 cm tall horizontal rebar. Despite having a less-than-inspiring experience with another manufacturer`s machine, the owners of Betoontoode and Tasandusvalu were pleasantly surprised with the performance of the CT-3000, especially the relationship between the quality of the curb and the simplicity of the machine. Discussions are underway regarding them buying a CT-3000 to be used for a project in Finland calling for rebar.
Curb Tec's Under-Guardrail Modification for the CT-3000
The auger housing can be modified in order for the CT-3000 to be able to pour conrete or asphat under guardrails.
Mikolajki 2010
International Christian Fellowship church members and Curb-Tec Europe co-owner Chris Hutchinson have been working with the Kowalewo Children's Home in Poland for several years, organizing activities and providing gifts and equipment for the children. For St. Nicholas Day in December 2010, they arranged crafts, cookie baking, carol singing and gift giving for the children. Chris thanked his business partners for their logistical support in making the event possible.
Curb Tec Manufactured Products Snapshot, 2009b
Curb-Tec Europe distributes Curb-Tec Inc.'s extrusion curb machines, including their top-of-class model CT-3000. Curb-Tec Inc. was established in 1999 in Florida and has since served customers in 16 countries, designing machines that solve common problems and minimize downtime based on the founders' engineering experience with Rexroth and the U.S. Defense Department combined with four decades of experience in curbing work.
Curb Tec Manufactured Products Snapshot, 2009
Curb-Tec Europe distributes Curb-Tec, Inc. curb extrusion machines, including their top-of-the-class CT-3000 model. Curb-Tec, Inc. was founded in 1999 in Florida and has served customers in 16 countries, applying engineering knowledge gained from Rexroth and the U.S. Defense Department to the design of durable, reliable curb machines.
Sullair Pneumatic Tools, Eng
The document discusses different types of tools, focusing on impact tools, rotary-impact tools, and rotary tools. It provides specifications for several jackhammer and pick hammer models, including the Sullair MK210, MK250, and MK31 jackhammers as well as the SK3, SK5, SK6, SK8, SK10, and SK12 pick hammers. All of the tools discussed are characterized as having high quality, minimal moving parts requiring little greasing, and ergonomic anti-vibration designs.
CTE Ostrow Wlkp WB Job, Dec 2008
Curb-Tec Europe job done using CT-900 small extrusion curb machine in Ostrow Wklp., Poland in December 2008
Slip Form Machine Presentation for General Directorate for Polish National Ro...
This was part of a presentation we did for General Directorate for Polish National Roads and Highways (GDDKiA) to promote the pour-in-place curbing method using both extrusion and slip form machines of different sizes. This part of the presentation was done by Mr. Irzyniec of Dynapac Poland, who we have a very close working relationship with.
CTUSA Tampa Job, Dec 2006
The document summarizes a job installing 140 meters of curb using a Curb-Tec extruder in Tampa, Florida over 6 hours. A crew of 5 people dug a trench, laid a chalk line, and used the Curb-Tec extruder to simultaneously form and install the curb while filling the trench, creating a seamless curb without cuts or special blocks. Photos show the results before and after, including a sloped end and control joint.
CTE Olsztyn Job, Jun 2008
This job involved placing a temporary water barrier and drainage pipes alongside a newly opened road in Olsztyn, Poland to protect it from heavy rains. A 14-person crew used a 14x12 cm mold over 1400 meters. When roads are built, the excavation destroys roots and leaves the area weak until regrowth. As Poland develops infrastructure and roads for EURO 2012, temporary barriers protect sides until roots regrow to prevent erosion and road damage from water runoff.
CTE Plock Job, Jul 2007
The Curb-Tec crew installed a 1700m long temporary water barrier in Plock, Poland over 37 hours to prevent excess water from killing grass along a road during construction. Unlike a permanent curb, this barrier did not require trenching, rebar, or adhesive as it would later be removed. The crew used a rounded 15x15cm mold and minimal finishing since it was a temporary structure.
CTUSA Lakeland Job, Jul 2004
A Curb-Tec crew of 5 people used a CT-3000 extruder to lay approximately 140 meters of concrete curb over 4 hours in Lakeland, Florida in July 2006. Some hand forming was required on steep inclines, and excess concrete was reduced by piling up dirt. The document includes 27 photos documenting the job.
Pour-in-Place Curb Machine Presentation for General Directorate for Polish Na...
This was part of a presentation we did for General Directorate for Polish National Roads and Highways (GDDKiA) to promote the pour-in-place curbing method using both extrusion and slip form machines of different sizes. We did this presentation along with Dynapac Poland, who we have a very close working relationship with.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
More Related Content
More from Chris Hutchinson
Curb Tec Manufactured Products Snapshot, 2009b
Curb-Tec Europe distributes Curb-Tec Inc.'s extrusion curb machines, including their top-of-class model CT-3000. Curb-Tec Inc. was established in 1999 in Florida and has since served customers in 16 countries, designing machines that solve common problems and minimize downtime based on the founders' engineering experience with Rexroth and the U.S. Defense Department combined with four decades of experience in curbing work.
Curb Tec Manufactured Products Snapshot, 2009
Curb-Tec Europe distributes Curb-Tec, Inc. curb extrusion machines, including their top-of-the-class CT-3000 model. Curb-Tec, Inc. was founded in 1999 in Florida and has served customers in 16 countries, applying engineering knowledge gained from Rexroth and the U.S. Defense Department to the design of durable, reliable curb machines.
Sullair Pneumatic Tools, Eng
The document discusses different types of tools, focusing on impact tools, rotary-impact tools, and rotary tools. It provides specifications for several jackhammer and pick hammer models, including the Sullair MK210, MK250, and MK31 jackhammers as well as the SK3, SK5, SK6, SK8, SK10, and SK12 pick hammers. All of the tools discussed are characterized as having high quality, minimal moving parts requiring little greasing, and ergonomic anti-vibration designs.
CTE Ostrow Wlkp WB Job, Dec 2008
Curb-Tec Europe job done using CT-900 small extrusion curb machine in Ostrow Wklp., Poland in December 2008
Slip Form Machine Presentation for General Directorate for Polish National Ro...
This was part of a presentation we did for General Directorate for Polish National Roads and Highways (GDDKiA) to promote the pour-in-place curbing method using both extrusion and slip form machines of different sizes. This part of the presentation was done by Mr. Irzyniec of Dynapac Poland, who we have a very close working relationship with.
CTUSA Tampa Job, Dec 2006
The document summarizes a job installing 140 meters of curb using a Curb-Tec extruder in Tampa, Florida over 6 hours. A crew of 5 people dug a trench, laid a chalk line, and used the Curb-Tec extruder to simultaneously form and install the curb while filling the trench, creating a seamless curb without cuts or special blocks. Photos show the results before and after, including a sloped end and control joint.
CTE Olsztyn Job, Jun 2008
This job involved placing a temporary water barrier and drainage pipes alongside a newly opened road in Olsztyn, Poland to protect it from heavy rains. A 14-person crew used a 14x12 cm mold over 1400 meters. When roads are built, the excavation destroys roots and leaves the area weak until regrowth. As Poland develops infrastructure and roads for EURO 2012, temporary barriers protect sides until roots regrow to prevent erosion and road damage from water runoff.
CTE Plock Job, Jul 2007
The Curb-Tec crew installed a 1700m long temporary water barrier in Plock, Poland over 37 hours to prevent excess water from killing grass along a road during construction. Unlike a permanent curb, this barrier did not require trenching, rebar, or adhesive as it would later be removed. The crew used a rounded 15x15cm mold and minimal finishing since it was a temporary structure.
CTUSA Lakeland Job, Jul 2004
A Curb-Tec crew of 5 people used a CT-3000 extruder to lay approximately 140 meters of concrete curb over 4 hours in Lakeland, Florida in July 2006. Some hand forming was required on steep inclines, and excess concrete was reduced by piling up dirt. The document includes 27 photos documenting the job.
Pour-in-Place Curb Machine Presentation for General Directorate for Polish Na...
This was part of a presentation we did for General Directorate for Polish National Roads and Highways (GDDKiA) to promote the pour-in-place curbing method using both extrusion and slip form machines of different sizes. We did this presentation along with Dynapac Poland, who we have a very close working relationship with.
More from Chris Hutchinson (10)
Slip Form Machine Presentation for General Directorate for Polish National Ro...
Slip Form Machine Presentation for General Directorate for Polish National Ro...
Pour-in-Place Curb Machine Presentation for General Directorate for Polish Na...
Pour-in-Place Curb Machine Presentation for General Directorate for Polish Na...
Recently uploaded
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Recently uploaded (20)
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Curb-Tec Manufactured Products, Apr 2011
- 1. 1 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 2. 2 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 3. 3 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 4. 4 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 5. 5 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 6. 6 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 7. 7 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 8. 8 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 9. 9 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 10. 10 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 11. 11 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 12. 12 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628
- 13. 13 For more information on these products, please contact us at: i nfo@curb-tec.pl or +48 22 266 0628