CPVC pipes manufacturers in India - Truflopipes is a well known brand of CPVC plumbing system for hot&cold water.

1. How to Use CPVC Plastic
Plumbing Pipe

2. When it comes to the water supply lines, CPVC tubing is considered as an ideal pipe. It is really simple
and easier to cut and collect via compression of cemented fittings. This type of pipe fitting is so durable
that even harsh water cannot affect its material. On the other hand, copper pipes can easily erode from the
harsh or acidic water. If you have decided to make use of CPVC pipe fittings for the water supply line, then
you have undoubtedly made a right choice. This write-up would help you to know how to use the CPVC
plastic plumbing pipe.

3. Following are the steps for using CPVC pipe fittings:
i) Cut the CPVC pipes: Ensure to cut the CPVC pipes via a special tool made for this purpose. The way you cut
the pipe should be free from blurs.
ii) Join CPVC to copper:
Switch off the water supply and cut your copper pipes from where you want them to tie
in with CPVC pipes.
iii) Push on a CPVC pipe fitting:
Remove the blurs from the copper pipe and grease the end of the copper pipe with the
dishwashing liquid. Ensure to loosen the nut on compression fitting for about two turns
before you push the pipe into the fitting. It makes it possible for you to tighten the nut.

4. iv) Use cement type shutoff valves: Ensure to add the shutoff valves via mechanical fittings. Don’t
forget to fix using dishwashing liquid for a better fit.
v) Swab on primer and then cement: Before you apply the cement to fit the CPVC pipes, ensure to
swab on the primer to the surface of the pipe.
vi) Make use of CPVC support: To support the CPVC pipe fittings, it is better to make use of the
CPVC support.
vii) Leave space at corners: To allow the tubing to contract or expand, do not forget to leave some
space at the corners.
viii) Bore over-sized holes: Make sure to bore the larger holes for half an inch.
ix) Press out and cover: Cement the tube that is pressed out to the water supply and cover it. Once
you are done with it, turn on the water supply after one hour and check whether it is fine or has any
leaks.

5. Quality to Look in UPVC Pipes and Fittings
UPVC Pipe fitting is an important part of any drainage system. The quality of a UPVC pipe ensures
that your water fitting remains intact. Before buying your equipment make sure that you are dealing
with an experienced and reputable UPVC fittings dealer. Some of the qualities that you might want to
look in UPVC pipes are:
1) Eco-friendly: A UPVC pipe needs to be eco-friendly. Plastic is a harmful ingredient for the
environment. The plumbing system of your property needs to green. You can prevent the harmful
toxins from releasing into the atmosphere as well as in the running water. A toxic system can lead to
the growth of bacteria in the water which can be harmful to people consuming it.
2) Long Life: Plumbing once installed needs to remain intact for a long time. You cannot afford to
dismantle the UPVC pipe fittings if any mishap occurs. It causes a lot of destruction to the property. A
UPVC pipe has a life extending more than 50 years if bought from a reputable industry.

6. 3) Resilient: A good UPVC pipe has to be resilient to the high pressure, UV rays, and other
uncontrollable factors. It should be resilient to any kind of combustion. It should have a defense
mechanism against the corrosion. In addition to all this, the cost has to fit in your budget.
All these qualities can be found easily if you are able to approach a good industry which is
experienced in manufacture and distribution of UPVC pipe and solutions.

7. For more details about CPVC Pipes and Fittings visit the
following link: https://www.truflopipes.com/cpvc-plumbing-system/