This annual report summarizes Commercial Metals Company's (CMC) performance in fiscal year 2008. Some key points:
- Net earnings were $232 million on $10.4 billion in sales, down from the previous year due to a large LIFO expense.
- CMC continued investing in new facilities, technology, and international and domestic capacity expansion.
- Demand was strong globally due to emerging markets, though slowed at the end of the fiscal year. CMC's strategy focuses on vertical integration and product/geographic diversification.
This document is Coventry Healthcare's 2004 annual report. It discusses Coventry's acquisition of First Health Group Corp in late 2004, which combined Coventry's local health plans with First Health's national provider network. It highlights Coventry's growth between 2000-2004, with revenues increasing from $2.6 billion to $5.3 billion and earnings per share growing from $0.69 to $3.72 over the period. The chairman reflects on Coventry's success in growing from a small regional managed care company into a national leader, driven by operating in the right business with disciplined cost management.
The document provides quarterly financial trends for The Bank of New York Mellon Corporation from 2007 to the first quarter of 2009. It shows trends in total revenue, fees, expenses, income, assets under management, and other key financial metrics. Total revenue declined in the fourth quarter of 2008 and first quarter of 2009 due to investment write-downs, restructuring charges, and other one-time items. Excluding these items, pre-tax operating margins and returns on equity remained strong, ranging from 33-45% and 10.9-16.9% respectively. Non-U.S. revenue accounted for around 30% of total revenue each quarter.
Coventry Health Care had a record-setting year in 2007. They grew revenue to nearly $10 billion, a 28% increase over 2006. Membership increased to over 4.6 million across all 50 states, served through their commercial, individual/government, and specialty divisions. Challenges in the healthcare landscape include rising costs, a growing uninsured population, and increasing Medicare/Medicaid costs. Coventry is well-positioned to help craft innovative solutions through public-private partnerships, given their expertise across multiple areas of healthcare.
- Citi reported revenues of $24.8 billion for Q1 2009, nearly double the prior year level, driven by strong results in institutional clients. However, net income was $1.6 billion, with most other businesses negatively impacted by the difficult economic environment.
- Expenses declined 23% from Q1 2008 to $12.1 billion, due to ongoing cost cutting efforts. Credit costs increased 76% to $10.3 billion, as net credit losses and loan loss reserves rose, primarily in consumer banking and cards.
- While results improved from the prior year, most businesses still struggled due to the weak economy. Management remains focused on reducing risks and expenses to strengthen the franchise during a challenging period.
Financial Analysis - Osisko Mining Corporation is a gold exploration compa…BCV
Osisko Mining Corporation is a Canadian gold exploration company. It holds interests in the Canadian Malartic gold deposit in Quebec, Canada, which accounted for 100% of its sales in 2013. The company's share price has fallen significantly over the past year, with a 50.8% decline over the past 52 weeks. Analyst ratings on the company are mostly neutral, with around 70% recommending a hold and 20-30% recommending a buy.
This document is BB&T Corporation's 2005 annual report. It provides financial highlights for 2005, noting that net income increased 6.1% to $1.654 billion and diluted earnings per share grew 7.1% to $3.00. Operating earnings rose 7.2% to $1.674 billion. Cash basis operating earnings, which exclude intangible assets and purchase accounting adjustments, increased 7.1% to $1.763 billion. The report discusses BB&T's strong loan, deposit and balance sheet growth in 2005 and notes the bank hired additional revenue producers and implemented strategies to boost organic account growth.
- BB&T Corporation reported lower operating earnings for the fourth quarter of 2008 compared to the same period in 2007. Operating earnings available to common shareholders decreased 41.4% to $243 million.
- Net interest income increased 14.2% to $1,132 million due to higher interest income, but this was more than offset by a large increase in the provision for credit losses of $344 million.
- Returns and profitability ratios declined from the prior year, with the return on average common equity decreasing to 7.26% and the efficiency ratio worsening to 51.9%.
This document provides financial highlights and selected financial data for ConocoPhillips for the third quarter and first nine months of 2007 compared to the same periods in 2006. Some key details include total revenues of $47.9 billion for the third quarter of 2007, net income of $3.7 billion, and cash flows from operating activities of $6 billion. Capital expenditures and investments totaled $2.6 billion for the third quarter.
This document is Coventry Healthcare's 2004 annual report. It discusses Coventry's acquisition of First Health Group Corp in late 2004, which combined Coventry's local health plans with First Health's national provider network. It highlights Coventry's growth between 2000-2004, with revenues increasing from $2.6 billion to $5.3 billion and earnings per share growing from $0.69 to $3.72 over the period. The chairman reflects on Coventry's success in growing from a small regional managed care company into a national leader, driven by operating in the right business with disciplined cost management.
The document provides quarterly financial trends for The Bank of New York Mellon Corporation from 2007 to the first quarter of 2009. It shows trends in total revenue, fees, expenses, income, assets under management, and other key financial metrics. Total revenue declined in the fourth quarter of 2008 and first quarter of 2009 due to investment write-downs, restructuring charges, and other one-time items. Excluding these items, pre-tax operating margins and returns on equity remained strong, ranging from 33-45% and 10.9-16.9% respectively. Non-U.S. revenue accounted for around 30% of total revenue each quarter.
Coventry Health Care had a record-setting year in 2007. They grew revenue to nearly $10 billion, a 28% increase over 2006. Membership increased to over 4.6 million across all 50 states, served through their commercial, individual/government, and specialty divisions. Challenges in the healthcare landscape include rising costs, a growing uninsured population, and increasing Medicare/Medicaid costs. Coventry is well-positioned to help craft innovative solutions through public-private partnerships, given their expertise across multiple areas of healthcare.
- Citi reported revenues of $24.8 billion for Q1 2009, nearly double the prior year level, driven by strong results in institutional clients. However, net income was $1.6 billion, with most other businesses negatively impacted by the difficult economic environment.
- Expenses declined 23% from Q1 2008 to $12.1 billion, due to ongoing cost cutting efforts. Credit costs increased 76% to $10.3 billion, as net credit losses and loan loss reserves rose, primarily in consumer banking and cards.
- While results improved from the prior year, most businesses still struggled due to the weak economy. Management remains focused on reducing risks and expenses to strengthen the franchise during a challenging period.
Financial Analysis - Osisko Mining Corporation is a gold exploration compa…BCV
Osisko Mining Corporation is a Canadian gold exploration company. It holds interests in the Canadian Malartic gold deposit in Quebec, Canada, which accounted for 100% of its sales in 2013. The company's share price has fallen significantly over the past year, with a 50.8% decline over the past 52 weeks. Analyst ratings on the company are mostly neutral, with around 70% recommending a hold and 20-30% recommending a buy.
This document is BB&T Corporation's 2005 annual report. It provides financial highlights for 2005, noting that net income increased 6.1% to $1.654 billion and diluted earnings per share grew 7.1% to $3.00. Operating earnings rose 7.2% to $1.674 billion. Cash basis operating earnings, which exclude intangible assets and purchase accounting adjustments, increased 7.1% to $1.763 billion. The report discusses BB&T's strong loan, deposit and balance sheet growth in 2005 and notes the bank hired additional revenue producers and implemented strategies to boost organic account growth.
- BB&T Corporation reported lower operating earnings for the fourth quarter of 2008 compared to the same period in 2007. Operating earnings available to common shareholders decreased 41.4% to $243 million.
- Net interest income increased 14.2% to $1,132 million due to higher interest income, but this was more than offset by a large increase in the provision for credit losses of $344 million.
- Returns and profitability ratios declined from the prior year, with the return on average common equity decreasing to 7.26% and the efficiency ratio worsening to 51.9%.
This document provides financial highlights and selected financial data for ConocoPhillips for the third quarter and first nine months of 2007 compared to the same periods in 2006. Some key details include total revenues of $47.9 billion for the third quarter of 2007, net income of $3.7 billion, and cash flows from operating activities of $6 billion. Capital expenditures and investments totaled $2.6 billion for the third quarter.
This document provides the unaudited interim financial statements of Prophecy Resource Corp. for the period ended December 31, 2009. It includes the balance sheet, income statement, cash flow statement, and notes to the financial statements. The notes provide information on the company's accounting policies regarding mineral properties, deferred exploration costs, financial instruments, and income taxes. The financial statements have been prepared by management and have not been reviewed by an auditor.
This document summarizes Freddie Mac's consolidated statements of income, balance sheets, and cash flows for the years ended December 31, 2007, 2006 and 2005. In 2007, Freddie Mac reported a net loss of $3.09 billion compared to net income of $2.33 billion in 2006. Total assets decreased slightly to $794.4 billion in 2007 from $804.9 billion in 2006. Cash flows from operating activities included a net loss of $3.09 billion for 2007, adjustments including $2.85 billion in provision for credit losses, and net purchases of held-for-sale mortgages totaling $2.1 billion.
The world's leading provider of computer-aided design, business and manufacturing software solutions tailored for the interior design and furniture industries.
MeadWestvaco Corporation provides concise summaries of its annual report in 3 sentences or less:
MeadWestvaco is focused on improving productivity, innovation, and customer focus to drive profitable growth. The company achieved over $400 million in annual cost savings through consolidation and efficiency gains. MeadWestvaco remains committed to safety, environmental stewardship, and good governance as it transforms its business and sets the goal of a minimum 10% annual return on capital.
Arrow Electronics had a record year in 2006 with $13.6 billion in sales, a nearly 22% increase over 2005. Some key highlights included operating income increasing nearly 27% to $622 million and net income per share of $2.92 compared to $2.18 in 2005. The company continued to expand its global electronic components and enterprise computing solutions businesses.
This document summarizes Ryder System Inc.'s financial performance for the second quarter and first half of 2006 compared to the same periods in 2005. Some key highlights include:
- Total revenue increased 14.8% to $1.6 billion for the quarter and 14.3% to $3.1 billion for the first half.
- Earnings before income taxes rose 15.5% to $104.6 million for the quarter and 16.5% to $183.8 million for the first half.
- The Fleet Management Solutions segment saw revenue increase 8.2% for the quarter and 7.2% for the first half, while earnings before taxes grew 6.8% and
Ryder System, Inc. reported financial results for the third quarter and first nine months of 2006. Total revenue increased 9% to $1.62 billion for the quarter and 12% to $4.71 billion for the nine month period. Net earnings increased slightly to $65.3 million for the quarter and $183.1 million for the nine months. Fleet Management Solutions remained the largest business segment and saw revenue increases of 5% and 6% for the respective periods. Supply Chain Solutions saw significant revenue growth of 19% and 29% for the quarter and nine month period.
Here you can find the annual report for the year 2011 of Volkswagen Financial Services AG. For further information please refer to http://www.vwfs.com/annualreport
The 2004 Burlington Resources annual report discusses the company's strong financial and operational performance in 2004 and outlook for 2005. Some key points:
- Burlington reported record financial results in 2004, including $1.527 billion in net income and a 12% increase in production to 2,817 MMCFE/day.
- The company replaced 125% of its 2004 production at a low finding cost of $1.27/MCFE and increased total reserves to 12.0 TCFE.
- Burlington expects to continue growing production 3-8% annually in 2005 through investment in its core asset base focused on North America.
- Challenges include continually upgrading the drilling inventory
- The document is the unaudited financial statements of Prophecy Resource Corp. as of March 31, 2008, prepared by management without an auditor's review.
- It includes the balance sheet, statement of operations and deficit, and statement of cash flows for the periods ended March 31, 2008 and March 31, 2007.
- The company had a net income of $34,391 for the quarter ended March 31, 2008 compared to a net loss of $55,286 for the same period in 2007.
PPG Industries reported financial results for the first quarter of 2007. Net sales increased 10% to $2.9 billion compared to $2.6 billion in the same period of 2006. Net income increased 5% to $194 million from $184 million. Earnings per share increased to $1.18 per share from $1.11 per share in 2006. The company saw increased sales across all business segments, with the largest increases in Performance and Applied Coatings and Optical and Specialty Materials. Total assets remained steady at $10.3 billion as of March 31, 2007.
Godawari Power & Ispat reported mediocre results for the first quarter of FY2011 with net sales falling 9.6% year-over-year to Rs196 crore due to reduced sponge iron production and lower steel sales. EBITDA margins grew 383 basis points year-over-year to 18.4% but fell 119 basis points quarter-over-quarter due to higher coal and iron ore costs. Net profit declined 12.8% year-over-year to Rs13 crore. The brokerage maintains a 'Buy' rating with a revised target price of Rs313, expecting earnings to grow at a 93.6% CAGR through FY2012 given ramped up iron
Locamerica reported strong financial results for 1Q12. Net profit increased 47.3% over 1Q11 to R$7.9 million, with net margins reaching 10.5%. ROIC for the last twelve months was 15.0%, an increase of 2.8 percentage points over 1Q11. Consolidated revenues grew 39.4% to R$272.5 million, with rental revenues increasing 18.5% to R$75.1 million and used car sales revenues rising 26.4% to R$19.8 million. EBITDA soared 47.6% to R$45.9 million and operating margins reached historical highs for the company in 1Q12.
The unaudited interim financial statements for Prophecy Resource Corp. as of March 31, 2009 include a notice that the statements have not been reviewed by an auditor. The balance sheet shows total assets of $1,277,002 including cash of $14,542, short-term investments of $75,000, and mineral property and deferred exploration costs totaling $1,169,337. Total liabilities are $96,186 and shareholders' equity is $1,180,816. The statement of operations shows a net loss of $48,791 for the three months ended March 31, 2009 and a deficit of $410,831. The statement of cash flows shows a net cash decrease of $
Danaher Corporation reported record results for the fourth quarter and full year 2004 with net earnings increasing 26% and 36% respectively over the previous year. Fourth quarter sales increased 33% to $1.98 billion while full year sales grew 30% to $6.89 billion. The company also expanded its segment reporting to three segments: Professional Instrumentation, Industrial Technologies, and Tools and Components. The CEO stated they were pleased with the strong gains across all three segments and record cash flow of $1.03 billion, a 20% increase over 2003.
The document provides an overview of CMC's business model, current market conditions, earnings results, and operational metrics for the third quarter of 2008. It discusses CMC's strategy of vertical integration, product diversification, and global geographic dispersion. It also reviews earnings, sales, margins, capital investments, and performance across CMC's different business segments.
This annual report summarizes Commercial Metals Company's financial performance in fiscal year 2006. Some key points:
- Record net earnings of $356 million on $7.6 billion in net sales, up from $286 million on $6.6 billion the prior year.
- All five business segments (domestic mills, CMCZ, domestic fabrication, recycling, and marketing/distribution) performed well due to favorable market conditions and the company's vertical integration strategy.
- Domestic mills set new records for sales, production, and shipments as metal spreads increased. The copper tube mill's operating profit increased significantly year-over-year.
The document provides an overview of CMC's business model, current market conditions, earnings results, and operational metrics for the third quarter of 2008. It discusses CMC's strategy of vertical integration, product diversification, and global geographic dispersion. It also reviews demand trends, input costs, earnings, investments, segment performance, and operational details.
The document provides an overview of CMC's business model which focuses on vertical integration, product diversification, and global geographic dispersion. It then discusses CMC's current market conditions and outlook across different geographic regions and product lines, including details on earnings expectations, capital investment projects, and quarterly financial statistics. The document also reviews factors influencing costs and selling prices for CMC's various steel manufacturing operations in North America.
The document provides an overview of CMC, a global steel and metals company. It discusses CMC's business model which focuses on vertical integration, product diversification, and global geographic dispersion. It also summarizes CMC's track record of conservative management and 30 consecutive years of profitability. Finally, it outlines CMC's five operating segments and overall strategy of achieving a global reach through regional focus and growth in key markets.
CMC is a global steel and metals company with over 14,000 employees worldwide. It manufactures, recycles, markets, and distributes steel and metal products through a network of over 200 locations globally. CMC operates steel minimills, fabrication plants, service centers, and recycling facilities. It aims to be vertically integrated and diversified in its product offerings and geographic reach.
CMC is a global steel and metals company with over 14,000 employees worldwide. It manufactures, recycles, markets, and distributes steel and metal products through a network of over 200 locations globally. CMC operates steel minimills, fabrication plants, service centers, and recycling facilities. It aims to vertically integrate its operations from scrap processing to steel fabrication to provide a hedge against steel and metal price fluctuations.
This document provides the unaudited interim financial statements of Prophecy Resource Corp. for the period ended December 31, 2009. It includes the balance sheet, income statement, cash flow statement, and notes to the financial statements. The notes provide information on the company's accounting policies regarding mineral properties, deferred exploration costs, financial instruments, and income taxes. The financial statements have been prepared by management and have not been reviewed by an auditor.
This document summarizes Freddie Mac's consolidated statements of income, balance sheets, and cash flows for the years ended December 31, 2007, 2006 and 2005. In 2007, Freddie Mac reported a net loss of $3.09 billion compared to net income of $2.33 billion in 2006. Total assets decreased slightly to $794.4 billion in 2007 from $804.9 billion in 2006. Cash flows from operating activities included a net loss of $3.09 billion for 2007, adjustments including $2.85 billion in provision for credit losses, and net purchases of held-for-sale mortgages totaling $2.1 billion.
The world's leading provider of computer-aided design, business and manufacturing software solutions tailored for the interior design and furniture industries.
MeadWestvaco Corporation provides concise summaries of its annual report in 3 sentences or less:
MeadWestvaco is focused on improving productivity, innovation, and customer focus to drive profitable growth. The company achieved over $400 million in annual cost savings through consolidation and efficiency gains. MeadWestvaco remains committed to safety, environmental stewardship, and good governance as it transforms its business and sets the goal of a minimum 10% annual return on capital.
Arrow Electronics had a record year in 2006 with $13.6 billion in sales, a nearly 22% increase over 2005. Some key highlights included operating income increasing nearly 27% to $622 million and net income per share of $2.92 compared to $2.18 in 2005. The company continued to expand its global electronic components and enterprise computing solutions businesses.
This document summarizes Ryder System Inc.'s financial performance for the second quarter and first half of 2006 compared to the same periods in 2005. Some key highlights include:
- Total revenue increased 14.8% to $1.6 billion for the quarter and 14.3% to $3.1 billion for the first half.
- Earnings before income taxes rose 15.5% to $104.6 million for the quarter and 16.5% to $183.8 million for the first half.
- The Fleet Management Solutions segment saw revenue increase 8.2% for the quarter and 7.2% for the first half, while earnings before taxes grew 6.8% and
Ryder System, Inc. reported financial results for the third quarter and first nine months of 2006. Total revenue increased 9% to $1.62 billion for the quarter and 12% to $4.71 billion for the nine month period. Net earnings increased slightly to $65.3 million for the quarter and $183.1 million for the nine months. Fleet Management Solutions remained the largest business segment and saw revenue increases of 5% and 6% for the respective periods. Supply Chain Solutions saw significant revenue growth of 19% and 29% for the quarter and nine month period.
Here you can find the annual report for the year 2011 of Volkswagen Financial Services AG. For further information please refer to http://www.vwfs.com/annualreport
The 2004 Burlington Resources annual report discusses the company's strong financial and operational performance in 2004 and outlook for 2005. Some key points:
- Burlington reported record financial results in 2004, including $1.527 billion in net income and a 12% increase in production to 2,817 MMCFE/day.
- The company replaced 125% of its 2004 production at a low finding cost of $1.27/MCFE and increased total reserves to 12.0 TCFE.
- Burlington expects to continue growing production 3-8% annually in 2005 through investment in its core asset base focused on North America.
- Challenges include continually upgrading the drilling inventory
- The document is the unaudited financial statements of Prophecy Resource Corp. as of March 31, 2008, prepared by management without an auditor's review.
- It includes the balance sheet, statement of operations and deficit, and statement of cash flows for the periods ended March 31, 2008 and March 31, 2007.
- The company had a net income of $34,391 for the quarter ended March 31, 2008 compared to a net loss of $55,286 for the same period in 2007.
PPG Industries reported financial results for the first quarter of 2007. Net sales increased 10% to $2.9 billion compared to $2.6 billion in the same period of 2006. Net income increased 5% to $194 million from $184 million. Earnings per share increased to $1.18 per share from $1.11 per share in 2006. The company saw increased sales across all business segments, with the largest increases in Performance and Applied Coatings and Optical and Specialty Materials. Total assets remained steady at $10.3 billion as of March 31, 2007.
Godawari Power & Ispat reported mediocre results for the first quarter of FY2011 with net sales falling 9.6% year-over-year to Rs196 crore due to reduced sponge iron production and lower steel sales. EBITDA margins grew 383 basis points year-over-year to 18.4% but fell 119 basis points quarter-over-quarter due to higher coal and iron ore costs. Net profit declined 12.8% year-over-year to Rs13 crore. The brokerage maintains a 'Buy' rating with a revised target price of Rs313, expecting earnings to grow at a 93.6% CAGR through FY2012 given ramped up iron
Locamerica reported strong financial results for 1Q12. Net profit increased 47.3% over 1Q11 to R$7.9 million, with net margins reaching 10.5%. ROIC for the last twelve months was 15.0%, an increase of 2.8 percentage points over 1Q11. Consolidated revenues grew 39.4% to R$272.5 million, with rental revenues increasing 18.5% to R$75.1 million and used car sales revenues rising 26.4% to R$19.8 million. EBITDA soared 47.6% to R$45.9 million and operating margins reached historical highs for the company in 1Q12.
The unaudited interim financial statements for Prophecy Resource Corp. as of March 31, 2009 include a notice that the statements have not been reviewed by an auditor. The balance sheet shows total assets of $1,277,002 including cash of $14,542, short-term investments of $75,000, and mineral property and deferred exploration costs totaling $1,169,337. Total liabilities are $96,186 and shareholders' equity is $1,180,816. The statement of operations shows a net loss of $48,791 for the three months ended March 31, 2009 and a deficit of $410,831. The statement of cash flows shows a net cash decrease of $
Danaher Corporation reported record results for the fourth quarter and full year 2004 with net earnings increasing 26% and 36% respectively over the previous year. Fourth quarter sales increased 33% to $1.98 billion while full year sales grew 30% to $6.89 billion. The company also expanded its segment reporting to three segments: Professional Instrumentation, Industrial Technologies, and Tools and Components. The CEO stated they were pleased with the strong gains across all three segments and record cash flow of $1.03 billion, a 20% increase over 2003.
The document provides an overview of CMC's business model, current market conditions, earnings results, and operational metrics for the third quarter of 2008. It discusses CMC's strategy of vertical integration, product diversification, and global geographic dispersion. It also reviews earnings, sales, margins, capital investments, and performance across CMC's different business segments.
This annual report summarizes Commercial Metals Company's financial performance in fiscal year 2006. Some key points:
- Record net earnings of $356 million on $7.6 billion in net sales, up from $286 million on $6.6 billion the prior year.
- All five business segments (domestic mills, CMCZ, domestic fabrication, recycling, and marketing/distribution) performed well due to favorable market conditions and the company's vertical integration strategy.
- Domestic mills set new records for sales, production, and shipments as metal spreads increased. The copper tube mill's operating profit increased significantly year-over-year.
The document provides an overview of CMC's business model, current market conditions, earnings results, and operational metrics for the third quarter of 2008. It discusses CMC's strategy of vertical integration, product diversification, and global geographic dispersion. It also reviews demand trends, input costs, earnings, investments, segment performance, and operational details.
The document provides an overview of CMC's business model which focuses on vertical integration, product diversification, and global geographic dispersion. It then discusses CMC's current market conditions and outlook across different geographic regions and product lines, including details on earnings expectations, capital investment projects, and quarterly financial statistics. The document also reviews factors influencing costs and selling prices for CMC's various steel manufacturing operations in North America.
The document provides an overview of CMC, a global steel and metals company. It discusses CMC's business model which focuses on vertical integration, product diversification, and global geographic dispersion. It also summarizes CMC's track record of conservative management and 30 consecutive years of profitability. Finally, it outlines CMC's five operating segments and overall strategy of achieving a global reach through regional focus and growth in key markets.
CMC is a global steel and metals company with over 14,000 employees worldwide. It manufactures, recycles, markets, and distributes steel and metal products through a network of over 200 locations globally. CMC operates steel minimills, fabrication plants, service centers, and recycling facilities. It aims to be vertically integrated and diversified in its product offerings and geographic reach.
CMC is a global steel and metals company with over 14,000 employees worldwide. It manufactures, recycles, markets, and distributes steel and metal products through a network of over 200 locations globally. CMC operates steel minimills, fabrication plants, service centers, and recycling facilities. It aims to vertically integrate its operations from scrap processing to steel fabrication to provide a hedge against steel and metal price fluctuations.
This document is the 2005 annual report for Commercial Metals Company. It summarizes the company's financial performance for fiscal year 2005, which saw record net earnings of $286 million on net sales of $6.6 billion, up from $132 million on $4.8 billion the previous year. The company's domestic mills and fabrication segments significantly outperformed the prior year due to higher steel prices and strong end-user demand. While operations in Poland saw a decline from the prior year, performance improved in the fourth quarter. Overall, the company benefited from favorable market conditions across most of its businesses.
This document is Commercial Metals Company's 2005 Annual Report which summarizes the company's financial performance for fiscal year 2005. Some key points:
- The company achieved record net earnings of $286 million on record net sales of $6.6 billion in fiscal year 2005, up from $132 million in net earnings on $4.8 billion in net sales in fiscal year 2004.
- All of the company's business segments - Domestic Mills, Domestic Fabrication, Recycling, and Marketing & Distribution - experienced strong financial performance and profitability in 2005.
- The company continued its strategy of vertical integration and diversification which has helped it perform well in changing market conditions.
- For
This document is Commercial Metals Company's 2005 Annual Report. It summarizes the company's financial performance for fiscal year 2005, including record net earnings of $286 million on net sales of $6.6 billion, up from $132 million on $4.8 billion the previous year. It discusses positive results across the company's business segments, including Domestic Mills, Domestic Fabrication, Recycling, and Marketing & Distribution. The annual report also provides an overview of the company's operations, strategic focus on vertical integration, and capital expenditure plans.
Commercial Metals Company had a profitable year in 2007, with earnings approaching record levels from 2006. The company made several strategic acquisitions, announced plans to build a new micro mill, and reorganized internally into two geographic business units. Net sales increased 16% to $8.3 billion while net earnings remained steady at $355 million. The company continued pursuing its strategies of product diversification, vertical integration, and global expansion.
Commercial Metals Company had a profitable year in 2007, approaching the record profits of 2006. The company made several strategic acquisitions, announced plans to build a new micro mill, and reorganized internally to take advantage of growth opportunities. All five of the company's business segments performed well. Safety remains a major focus.
Commercial Metals Company had a profitable year in 2007, approaching the record profits of 2006. The company made several strategic acquisitions, announced plans to build a new micro mill, and reorganized internally to take advantage of growth opportunities. All five of the company's business segments performed well. Safety remains a major focus.
Commercial Metals Company reported record financial results for fiscal year 2006 with net sales of $7.6 billion, net earnings of $356 million, and diluted earnings per share of $2.89. All five of CMC's business segments performed well, with domestic steel mills, CMCZ (the Polish steel operation), and recycling being especially strong. Market conditions were favorable, especially for non-residential construction, and CMC executed well. The company also invested in new facilities, acquisitions, and branding initiatives. CMC has high confidence in its future due to the continued expected strength of its end markets and its vertically integrated business model.
This annual report summarizes Commercial Metals Company's financial performance in fiscal year 2006. Some key points:
- Record net earnings of $356 million on $7.6 billion in net sales, up from $286 million on $6.6 billion the prior year.
- All five business segments (domestic mills, CMCZ, domestic fabrication, recycling, and marketing/distribution) performed well due to favorable market conditions and the company's vertical integration strategy.
- Domestic mills set production and shipment records while benefiting from high metal spreads. CMCZ also improved significantly through organizational changes and new investments.
The Shaw Group is a leading provider of engineering, construction, environmental remediation, and facilities management services to government and private sector clients. In fiscal year 2003, the company increased revenues to $3.3 billion despite adverse market conditions. The document discusses Shaw's evolution into a more diversified organization with capabilities in areas such as power, process industries, environmental remediation, and infrastructure. It provides an overview of Shaw's financial performance, backlog composition, and strategies for future growth.
Olympic Steel reported financial results for the first quarter of 2009 with a net loss of $25.5 million compared to net income of $13.2 million in the first quarter of 2008. Net sales decreased 48.8% to $140.9 million due to a 45.6% decrease in tons sold. The results were negatively impacted by a $30.6 million inventory write-down and weaker demand and pricing due to the economic downturn. The company expects results to improve as market conditions stabilize but approved a reduced quarterly dividend.
Deutsche bank 8th annual russia one on-one conference, лондонevraz_company
This document provides an overview of EVRAZ Group, a world-class steel and mining company. Some key points:
- EVRAZ is one of the largest steel producers globally and a leader in markets like Russia, CIS, Europe, and North America.
- In 2009, EVRAZ produced over 15 million tons of crude steel and over 14 million tons of rolled steel products.
- EVRAZ has implemented cost-cutting measures and production optimizations to maintain its low-cost position. This has helped stabilize operations during the economic crisis.
- The mining segment has remained EBITDA positive due to self-sufficiency in raw materials and benefitting from higher iron ore and coal prices.
This document contains quarterly financial reports and an overview of Kotak Mahindra Bank. Some key points:
- Kotak Mahindra Bank reported a profit after tax of Rs. 416 crore for Q1 FY12, up 27% year-over-year. Total advances grew 36% to Rs. 44,699 crore while deposits increased 33% to Rs. 29,397 crore.
- The bank has a wide geographical presence in India with over 2,100 branches and offices internationally. Its key business segments are banking, car finance, life insurance, securities, mutual funds, and asset management.
- Total revenues for Q1 FY12 were Rs. 2,
This document contains:
1) Financial reports and performance summaries for Kotak Mahindra Bank and its subsidiaries for Q1 FY12, including details on profits, revenues, assets, loan portfolio and key metrics.
2) An overview of the various business segments including consumer banking, commercial banking, wholesale banking and details on growth strategies.
3) Consolidated financial highlights for Q1 FY12 with comparisons to previous periods, showing increased profits, revenues and loan growth.
The document is Coventry Healthcare's 2006 Annual Report. It discusses Coventry's business strategy and financial performance in 2006. Key points include:
- Coventry organized its business into three divisions - Commercial, Individual/Government, and Specialty - to capitalize on growth opportunities.
- The Commercial division continued strong growth while maintaining industry-leading margins.
- The Individual/Government division saw significant growth from the new Medicare Part D program and expanding Medicaid and individual businesses.
- All divisions performed well financially in 2006, with revenues reaching a record $7.7 billion and earnings continuing to grow.
Conforming Wireless P&L for 12 Months Ending 9/30/07finance6
This document provides a summary of Sprint Nextel Corporation's non-GAAP wireless statements of operations and statistics for the quarter ended September 30, 2007 and year-to-date. It shows operating revenues, expenses, operating income, and other financial metrics. It also includes reconciliations between GAAP and non-GAAP measures such as adjusted operating income and adjusted OIBDA. Key notes further explain special items and non-recurring expenses such as merger and integration costs.
The audited financial statements are for Spider Resources Inc. for the years ending December 31, 2009 and 2008. The auditors issued an unqualified opinion stating the financial statements fairly represent the financial position of the company.
Net losses for 2009 and 2008 were $748,277 and $716,861 respectively, with a cumulative deficit from inception of $16,949,367. Cash decreased from $3,205,855 in 2008 to $2,716,778 in 2009.
plains all american pipeline Annual Reports 2000finance13
Plains All American Pipeline is a master limited partnership that transports, terminals, gathers and markets crude oil. It handles over 600,000 barrels per day across assets in multiple US states and provinces in Canada. The company achieved strong financial results in 2000 with increased operating margins and cash flow. Plains All American plans to continue growing organically and through strategic acquisitions, recently expanding into Canada through the acquisition of Murphy Oil's midstream assets to capitalize on increasing oil production and demand in the region. The company maintains a strong financial profile to support its growth objectives.
- Spider Resources Inc. is a development stage mining company that prepares interim financial statements on a quarterly basis.
- The interim financial statements for the three months ended March 31, 2010 were prepared by management who is responsible for their content.
- For the three month period, the company reported a net loss of $316,801 and an accumulated deficit of $17,266,168.
This document summarizes Steel Dynamics' consolidated statements of operations and supplemental operating information for the first quarter of 2009 compared to the fourth quarter of 2008 and first quarter of 2008. It shows a significant decline in net sales, shipments, and production across all business segments from Q1 2008 to Q1 2009, resulting in an operating loss for the company in Q1 2009 compared to operating income in the prior periods.
The document provides selected financial data for The TJX Companies, Inc. for fiscal years 2000-1996. Some key highlights include:
- Net sales increased from $8.8 billion in FY2000 to $7.9 billion in FY1999 and $7.4 billion in FY1998.
- Income from continuing operations before extraordinary items increased from $526.8 million in FY2000 to $433.2 million in FY1999 and $306.6 million in FY1998.
- Total number of stores increased from 1,357 in FY2000 to 1,246 in FY1999 and 1,171 in FY1998.
Similar to commercial metals E12CEF05-1876-41A8-9560-0FADE6D607D9_2008_AR (20)
This document provides an overview of Commercial Metals Company (CMC) and its quarterly performance. It discusses CMC's business model, including its vertical integration and product and geographic diversification. It also summarizes CMC's financial performance from 2003-2007, highlighting increasing sales, earnings, and shareholder returns over that period. Current market conditions and CMC's outlook are briefly addressed.
The document provides an overview of CMC's business model and current market conditions for the 4th quarter of 2008. It summarizes CMC's key business segments, product lines, capital projects, financial statistics, and discusses challenges in the global steel market including falling prices, reduced demand, and excess inventory. It analyzes factors such as raw material costs, sales prices, margins, and operating profits across CMC's divisions.
The document provides an overview of CMC's business model and current market conditions for the 4th quarter of 2008. It summarizes CMC's key business segments, current projects, liquidity position, financial statistics, and discusses challenges in the global steel market including falling prices, reduced demand, and excess inventory. It analyzes performance and outlook for CMC's Americas and international operations.
This document summarizes notes from the 4th Annual Global Steel CEO Forum held by Goldman Sachs on December 4, 2008. It discusses the current challenging market conditions for the steel industry due to the global liquidity crisis, including falling prices, production cutbacks, and declining demand. Updates are provided on conditions and outlook for different markets, including further price declines and inventory reductions in North America, continued cutbacks and oversupply in Europe and the Middle East, and China's efforts to stimulate domestic demand and infrastructure spending to boost its economy and steel demand. Breaking the negative cycle depends on the effectiveness of global government intervention programs and restoration of confidence.
The document discusses how Commercial Metals Company (CMC) is different from other steel companies. It notes that CMC focuses on long steel products, has diversified its business across five segments including steel mills, fabrication, recycling, and marketing, and has a track record of consistent profitability and financial strength over 26 years. The document aims to show investors that CMC's strategy and performance set it apart from other steel industry firms.
The document discusses how Commercial Metals Company (CMC) is different from other steel companies. It notes that CMC focuses on long steel products, has diversified its business across five segments including steel mills, fabrication, recycling, and marketing, and has a track record of consistent profitability and financial strength over 26 years. The document aims to show investors that CMC's strategy and performance set it apart from other steel industry firms.
The document discusses how Commercial Metals Company (CMC) is different from other steel companies. It notes that CMC focuses on long steel products, has diversified its business across five segments including steel mills, fabrication plants, recycling, and marketing/distribution, and has a track record of consistent profitability and financial strength over 26 years. The document aims to show shareholders that CMC's business strategy and performance set it apart from other steel industry firms.
This annual report summarizes Commercial Metals Company's (CMC) performance in fiscal year 2008. Some key points:
- Net earnings were $232 million on $10.4 billion in sales, down from the previous year due to a large LIFO expense.
- CMC continued investing in new facilities, technology, and international and domestic capacity expansion.
- Demand was strong globally due to emerging markets, though slowed at the end of the fiscal year. CMC's strategy focuses on vertical integration and product/geographic diversification.
This annual report summarizes Commercial Metals Company's (CMC) performance in fiscal year 2008. Some key points:
- Net earnings were $232 million on $10.4 billion in sales, down from the previous year due to a large LIFO expense.
- CMC continued investing in new facilities, technology, and international and domestic capacity expansion.
- Demand was strong globally due to emerging markets, though slowed at the end of the fiscal year. CMC's strategy focuses on vertical integration and product/geographic diversification.
The Annual Meeting of Stockholders of Commercial Metals Company will be held on January 22, 2009 at 10:00 am in Irving, Texas. The purposes of the meeting are to elect three directors, ratify the appointment of the independent accounting firm, and vote on a stockholder proposal regarding adding protections for sexual orientation and gender identity to the company's non-discrimination policy. Stockholders of record as of November 24, 2008 are entitled to vote.
The Annual Meeting of Stockholders of Commercial Metals Company will be held on January 22, 2009 at 10:00 am in Irving, Texas. The purposes of the meeting are to elect three directors, ratify the appointment of the independent accounting firm, and vote on a stockholder proposal regarding adding protections for sexual orientation and gender identity to the company's non-discrimination policy. Stockholders of record as of November 24, 2008 are entitled to vote.
The Annual Meeting of Stockholders of Commercial Metals Company will be held on January 22, 2009 at 10:00 am in Irving, Texas. The purposes of the meeting are to elect three directors, ratify the appointment of the independent accounting firm, and vote on a stockholder proposal regarding adding protections for sexual orientation and gender identity to the company's non-discrimination policy. Stockholders of record as of November 24, 2008 are entitled to vote.
Commercial Metals Company (CMC) is a global steel and metal producer founded in 1915. It operates recycling facilities, steel mills, and fabrication plants across the Americas and internationally. CMC has five business segments that provide vertical integration: Americas Recycling, Americas Mills, Americas Fabrication & Distribution, International Mills, and International Fabrication & Distribution. CMC focuses on consistent growth, a strong balance sheet, and vertical integration across its global network of metal manufacturing and fabrication facilities.
This document from Commercial Metals Company discusses non-GAAP financial measures that the company uses internally and discloses publicly, including EBITDA, total capitalization, long-term debt to capitalization ratio, total debt to capitalization plus short-term debt ratio, and current ratio. It provides the calculations and figures for these measures as of November 30, 2008, such as EBITDA of $163,914, long-term debt to capitalization ratio of 42.0%, and current ratio of 2.1.
The 2000 Annual Report of ArvinMeritor summarizes the company's performance in fiscal year 2000 following the merger of Arvin and Meritor to form ArvinMeritor. Key points include:
- ArvinMeritor became the 11th largest independent global automotive supplier with $7.7 billion in pro forma sales in 2000 following the merger.
- However, net income declined 9% to $254 million due to challenges from slowing automotive production in North America and Europe in the second half of the year.
- The company identified cost synergies exceeding initial targets from the merger and aims to reduce costs further to improve financial performance and competitive position.
- Going forward, ArvinMer
how to sell pi coins effectively (from 50 - 100k pi)DOT TECH
Anywhere in the world, including Africa, America, and Europe, you can sell Pi Network Coins online and receive cash through online payment options.
Pi has not yet been launched on any exchange because we are currently using the confined Mainnet. The planned launch date for Pi is June 28, 2026.
Reselling to investors who want to hold until the mainnet launch in 2026 is currently the sole way to sell.
Consequently, right now. All you need to do is select the right pi network provider.
Who is a pi merchant?
An individual who buys coins from miners on the pi network and resells them to investors hoping to hang onto them until the mainnet is launched is known as a pi merchant.
debuts.
I'll provide you the what'sapp number.
+12349014282
Abhay Bhutada Leads Poonawalla Fincorp To Record Low NPA And Unprecedented Gr...Vighnesh Shashtri
Under the leadership of Abhay Bhutada, Poonawalla Fincorp has achieved record-low Non-Performing Assets (NPA) and witnessed unprecedented growth. Bhutada's strategic vision and effective management have significantly enhanced the company's financial health, showcasing a robust performance in the financial sector. This achievement underscores the company's resilience and ability to thrive in a competitive market, setting a new benchmark for operational excellence in the industry.
where can I find a legit pi merchant onlineDOT TECH
Yes. This is very easy what you need is a recommendation from someone who has successfully traded pi coins before with a merchant.
Who is a pi merchant?
A pi merchant is someone who buys pi network coins and resell them to Investors looking forward to hold thousands of pi coins before the open mainnet.
I will leave the what'sapp contact of my personal pi merchant to trade with
+12349014282
STREETONOMICS: Exploring the Uncharted Territories of Informal Markets throug...sameer shah
Delve into the world of STREETONOMICS, where a team of 7 enthusiasts embarks on a journey to understand unorganized markets. By engaging with a coffee street vendor and crafting questionnaires, this project uncovers valuable insights into consumer behavior and market dynamics in informal settings."
"Does Foreign Direct Investment Negatively Affect Preservation of Culture in the Global South? Case Studies in Thailand and Cambodia."
Do elements of globalization, such as Foreign Direct Investment (FDI), negatively affect the ability of countries in the Global South to preserve their culture? This research aims to answer this question by employing a cross-sectional comparative case study analysis utilizing methods of difference. Thailand and Cambodia are compared as they are in the same region and have a similar culture. The metric of difference between Thailand and Cambodia is their ability to preserve their culture. This ability is operationalized by their respective attitudes towards FDI; Thailand imposes stringent regulations and limitations on FDI while Cambodia does not hesitate to accept most FDI and imposes fewer limitations. The evidence from this study suggests that FDI from globally influential countries with high gross domestic products (GDPs) (e.g. China, U.S.) challenges the ability of countries with lower GDPs (e.g. Cambodia) to protect their culture. Furthermore, the ability, or lack thereof, of the receiving countries to protect their culture is amplified by the existence and implementation of restrictive FDI policies imposed by their governments.
My study abroad in Bali, Indonesia, inspired this research topic as I noticed how globalization is changing the culture of its people. I learned their language and way of life which helped me understand the beauty and importance of cultural preservation. I believe we could all benefit from learning new perspectives as they could help us ideate solutions to contemporary issues and empathize with others.
Abhay Bhutada, the Managing Director of Poonawalla Fincorp Limited, is an accomplished leader with over 15 years of experience in commercial and retail lending. A Qualified Chartered Accountant, he has been pivotal in leveraging technology to enhance financial services. Starting his career at Bank of India, he later founded TAB Capital Limited and co-founded Poonawalla Finance Private Limited, emphasizing digital lending. Under his leadership, Poonawalla Fincorp achieved a 'AAA' credit rating, integrating acquisitions and emphasizing corporate governance. Actively involved in industry forums and CSR initiatives, Abhay has been recognized with awards like "Young Entrepreneur of India 2017" and "40 under 40 Most Influential Leader for 2020-21." Personally, he values mindfulness, enjoys gardening, yoga, and sees every day as an opportunity for growth and improvement.
BONKMILLON Unleashes Its Bonkers Potential on Solana.pdfcoingabbar
Introducing BONKMILLON - The Most Bonkers Meme Coin Yet
Let's be real for a second – the world of meme coins can feel like a bit of a circus at times. Every other day, there's a new token promising to take you "to the moon" or offering some groundbreaking utility that'll change the game forever. But how many of them actually deliver on that hype?
3. 1
commercial metals company 2008 annual report
Having been fueled by the powerful demand for steel and
other metals in emerging economies around the world,
we now enter an interim period of uncertainty as the global
financial crisis is resolved. Long term we continue to see
strong and sustainable growth for the steel industry. CMC has
had the foresight to invest and prepare for today’s challenges
and tomorrow’s global opportunities. Vertically integrated,
we can better control our raw material costs and compete on
a global scale. We are building on a solid foundation.
4. 2
Fiscal 2008 was another successful year for CMC.
It was also a year in which we continued to invest
in technology, new facilities, U.S. capacity, and international
expansion, to ensure even stronger years ahead.
12 20
03 13 18 22
contents
A Message from Americas
Financial Letter to Americas Americas
Stanley A. Rabin Mills
Highlights Stockholders Recycling Fabrication
& Distribution
24 26 30 32 35 36
International International Selected Operations Directors Corporate
Mills Fabrication Financial Data & Officers Information
& Distribution
5. 3
commercial metals company 2008 annual report
financial HiGHliGHts YEAR ENDED AUGUST 31
2008 2007 % increase
(IN THOUSANDS, EXCEPT SHARE DATA)
Net sales $ 10,427,378 $ 8,329,016 25
Net earnings 231,966 355,431 (35)
Diluted earnings per share 1.97 2.92 (33)
Net working capital 1,484,962 1,386,263 7
Cash dividends per share 0.45 0.33 36
Cash dividends paid 52,061 39,254 33
Average diluted shares outstanding 117,685,753 121,681,730 (3)
Stockholders’ equity 1,638,383 1,548,567 6
Stockholders’ equity per share 14.40 13.06 10
Total assets 4,746,371 3,472,663 37
tonnaGes sHipped
2008 2007 2006 2005 2004
(SHORT TONS IN THOUSANDS)
Domestic steel mill rebar shipments 1,135 972 1,102 944 1,014
Domestic steel mill structural
and other shipments 1,393 1,278 1,390 1,322 1,387
CMCZ shipments 1,434 1,366 1,250 1,092 1,082
CMCS shipments 58 — — — —
Total mill tons shipped 4,020 3,616 3,742 3,358 3,483
Fab plant rebar shipments 1,061 1,014 1,076 890 829
Fab plant structural, joist, deck
and post shipments 665 581 569 452 421
Total fabrication tons shipped 1,726 1,595 1,645 1,342 1,250
Domestic scrap metal tons
processed and shipped 4,026 3,845 3,697 3,331 3,411
net sales net earninGs
($ billions) ($ millions)
400
12
commercial metals and processing plants,
356 355
10.4 350
company and subsidiaries construction-related product
10
286
300
8.3
recycle, manufacture and warehouses, a copper
8 232
7.2 250
market steel and metal tube mill, metal recycling
6.3
6 200
products, related materials facilities and marketing and
4.6 132
150
4
and services through a distribution offices in the
100
network including steel united states and in strategic
2
50
minimills, steel fabrication international markets.
0 0
04 05 06 07 08
04 05 06 07 08
6. 4
investinG
in tecHnoloGy
In 2008, CMC continued our initiative to implement
SAP software throughout the company, allowing improved
accounting and financial efficiencies and information
sharing across our global enterprise. The software has been
successfully launched at CMC Corporate, CMC Steel
Texas and CMC Zawiercie.
7. 5
commercial metals company 2008 annual report
cmc technology in action
our new mill, cmc steel arizona, will use
new manufacturing technology, including:
endless casting/rolling process
to melt, cast and roll steel in one
uninterrupted process.
Baghouse air filtering and other
environmental technologies to ensure
we eliminate dust and generate
virtually no materials for disposal.
8. 6
investinG in new
facilities
In fiscal 2008, CMC announced plans for the construction
of a new facility in Mesa, Arizona. CMC Steel Arizona
will be a micromill, an innovative, environmentally conscious
new steel mill design concept. Compared to conventional
steel mills, micromills are cleaner, simpler and more compact.
The latest technologies will allow CMC Steel Arizona to
melt, cast and roll steel in a process that promotes high
yields and low energy and alloy costs.
10. 8
investinG in u.s.
faBrication capacity
Through several acquisitions of rebar fabricators in fiscal
2008, we enhanced our ability to serve U.S. customers
in markets including North Texas and the Western states,
and we strengthened our position as one of the largest rebar
fabricators in the United States. Among our acquisitions:
Reinforcing Post-Tensioning Services, Inc.; several ABC
Coating companies; Rebar Services and Supply Company;
and Economy Steel, Inc.
12. 10
investinG
internationally
Early in fiscal 2008, CMC increased our global presence
with the purchase of a pipe and tubular steel mill in
Croatia. In the years ahead, CMC Sisak will allow us to serve
key markets in Central and Eastern Europe. CMC has
operations in 14 nations, and we are able to serve emerging
markets the world over.
13. 11
commercial metals company 2008 annual report
62%
a world of opportunity
emerging nations such as china
china, india, russia and Brazil
14%
will spend an estimated $4.35
trillion on infrastructure over
india
the next decade, ensuring
7%
strong demand for
companies like cmc.
russia
3%
mexico
2%
Brazil
2%
indonesia
infrastructure
10%
spendinG By country
over tHe next decade
source: Goldman sachs Global
other
economics research, 2008
14. 12
a messaGe from stanley a. raBin
dear shareholders and friends,
The time has come for me to step down from my responsibilities as Chairman of the Board of Directors
of Commercial Metals Company, a position I have been honored to hold since 1999.
My employment with Commercial Metals began in 1970. Over the past 38 years I have held a number of
jobs with the Company, including President, beginning in 1978, and Chief Executive Officer from 1979-2006.
I have also been a director since 1979. As of August 31, 2008, I have relinquished all my posts at CMC.
My retirement hasn’t come as a surprise. We have been following a well-publicized, phased succession plan,
under which I relinquished my position as CEO on September 1, 2006. The plan ensures that an experienced
management team is in place today, led by current President and CEO Murray McClean, who now adds the
Board chairmanship to his responsibilities.
I’m proud to have been part of a team that has overseen great growth in shareholder value and achieved
a record of success through a number of business cycles, including more than 30 years of consecutive
profitability and the record results we have enjoyed the past several years. This growth has been fueled
by a major expansion in our domestic and international manufacturing, fabrication and distribution segments.
The Company is poised for even greater success in the years ahead despite the challenges facing CMC today
because of the global financial meltdown.
None of this success would have been possible without the hard work of many excellent colleagues. There
are too many to name. And, of course, all of us owe a debt to the leaders who have preceded me in retirement,
and all those who worked for the success of CMC over many years.
I would also like to salute colleagues on the Board of Directors, whose independence, guidance, expertise
and confidence have made chairing the Board a privilege and a pleasure.
Finally, I want to thank all the members of the CMC family, from Arkansas to Zawiercie. I’m proud to have
been in the metals industry and to have had the opportunity to work alongside you.
stanley a. raBin
15. 13
commercial metals company 2008 annual report
to our
stocKHolders
For the year ended August 31, 2008, your Company reported annual net earnings per diluted share
of $1.97 and recorded net earnings of $232 million on net sales of $10.4 billion. This compares
with net earnings per diluted share of $2.92 and net earnings of $355 million on net sales of $8.3
billion last year. The current year included a huge, unprecedented pre-tax LIFO expense of $322
million ($1.78 per diluted share) compared with a pre-tax LIFO expense of $51.2 million ($0.27 per
diluted share) in the previous year. The effective tax rate was 31.1%, and the net earnings return
on beginning equity was 15%.
continuinG a
Operationally, fiscal 2008 was an excellent year.
mill safety
culture
At the time of writing this letter, it is hard to believe that after such a tremendous fiscal year ended
on August 31, 2008, during the next few weeks we would witness a financial meltdown starting in CMC Steel Arkansas was
the U.S. and quickly spreading globally. Panic and fear have overcome fundamentals. As a result, our named the safest mill in
share price dipped below our book value per share. This makes no sense, certainly in the long term.
North America in 2007
We believe demand for steel and raw materials from the emerging countries, led by China, will return
by the Steel Manufacturers
once confidence and the credit markets have been restored.
Association, the sixth year
in a row a CMC mill has
We believe we are in a long-term, secular cycle with the highs being higher and the lows higher than
won this distinction; other
in the past.
CMC mills ranked second,
HiGHliGHts and marKet conditions > Fiscal 2008 followed the momentum built up in fiscal 2007. third, and fifth.
Strong demand in global emerging markets for raw materials, iron ore, ferrous scrap and steel products
resulted in record prices for many products. Non-residential construction in the U.S. overall was good,
but off the peaks of fiscal 2006. Service centers in the U.S. maintained comparatively low inventory
levels (despite rapidly rising steel prices) due to weaker end-use demand. A combination of stronger
global demand, higher international steel prices, a weaker U.S. dollar and high freight rates led to
significant reduction in imports of rebar to the U.S. (down 40% from fiscal 2007).
China’s last round of export taxes on steel in January 2008 dramatically slowed overall steel exports
(down 30% year over year). This led to a supply tightness in many markets (e.g., the Middle East and
Asia) resulting in record prices for steel (e.g., rebar peaked at U.S. $1,500 per metric ton in Middle
Eastern markets).
Inventories of steel in most global markets were comparatively low. By fiscal year end, demand was
slowing in many global markets. This was partly seasonal (e.g., summer holidays in Europe; extreme
hot weather and the start of Ramadan in the Middle East; monsoon season in Asia; and the Beijing
Olympics in China/Asia). However, it is clear now that the credit squeeze, tighter monetary policy to
fight inflation, demand destruction due to the very high oil prices, as well as the influence of the U.S.
economic slowdown, were also impacting demand in global markets.
16. 14
strateGy > We continue with our vertical integration strategy as well as product and geographic
diversification. We extract value along the supply chain upstream with recycling (scrap sourcing
and processing), steel mills and fabrication (downstream) as well as our marketing and distribution
operations. Our focus remains global with a regional approach to our business. We target growth
products, markets and geographies, both in the U.S. and globally.
specific oBjectives and GrowtH initiatives > During fiscal 2008, we accomplished the following:
2008 net sales
Americas Recycling 18%
1 Successful transition to the two major operating groups: CMC Americas and CMC International with
Americas Mills 16%
five reporting segments, namely: Americas Recycling; Americas Mills; Americas Fabrication &
Americas Fabrication
Distribution; International Mills; and International Fabrication & Distribution.
& Distribution 24%
International Mills 10%
2 CMC Steel Arizona (Micro Mill) – After a delay in obtaining the required permits, construction
International Fabrication
& Distribution 32%
commenced with commissioning forecasted during September 2009. The capacity is 280,000
tons of rebar.
3 CMC Zawiercie (Poland) – The wire rod block (100,000 metric tons capacity) was constructed with
commissioning in October 2008. The construction has commenced on a flexible, medium section
rolling mill (650,000 metric tons capacity) with commissioning forecasted during January 2010.
4 CMC Sisak (Croatia) – We acquired CMC Sisak in September 2007 (a 300,000 metric tons capacity
pipe and tube mill) with a plan to spend significant capex to replace the electric arc furnace and
modify the caster. Most of this capex will be spent in fiscal 2009.
2008 adjusted
5 ERP/SAP System – We were successful in all the rollouts of SAP during fiscal 2008, namely Corporate,
operatinG profit
Americas Recycling 29% Human Resources, U.S. Payroll, CMC Steel Texas and CMC Zawiercie (Poland).
Americas Mills 41%
6 Acquisitions – We made seven acquisitions during fiscal 2008 with two significant acquisitions late
Americas Fabrication
& Distribution (13)%
in the fourth quarter, namely ABC Coating and RPS, two major rebar fabricators.
International Mills 19%
International Fabrication
safety > Safety continues to be a major focus for our facilities worldwide. During calendar year
& Distribution 24%
2007, our four U.S. steel minimills combined were the safest in North America as recognized by the
Steel Manufacturer’s Association. Individually, our mills were ranked: No. 1 - CMC Steel Arkansas;
No. 2 - CMC Steel Alabama; No. 3 - CMC Steel South Carolina; and No. 5 - CMC Steel Texas.
In addition, CMC Coil Steels, Erskine Park in Sydney, Australia was the safest steel location in
Australia/New Zealand.
americas recyclinG > It was a record year for our recycling operations. We shipped approximately
3.4 million tons of scrap compared to 3.2 million tons in fiscal 2007. Ferrous scrap comprised the
largest tonnage with 3.1 million tons shipped, which was 211 thousand tons higher than in fiscal
2007. Adjusted operating profit for fiscal 2008 was $146 million compared with $113 million last
year. Net sales were $2.2 billion compared with $1.8 billion in fiscal 2007.
Ferrous scrap prices peaked in July with the AMM Chicago shredded price at $605 per long ton.
We shipped approximately 305 thousand tons of nonferrous scrap (primarily aluminum, copper
and stainless steel), a decrease of approximately 45 thousand tons compared with fiscal 2007, due
in large part to the U.S. manufacturing slowdown.
americas mills > This segment is comprised of four steel minimills and a copper tube mill. The year
was categorized by sharply rising steel prices, in particular in the third quarter and beginning of the
fourth quarter, before a modest decline in late August. Nonresidential markets were good overall, but
17. 15
commercial metals company 2008 annual report
with some pockets of weakness. Service centers managed their inventories at relatively low levels
despite the rising steel prices. With the U.S. economy slowing, demand softened by the end of the
fourth quarter.
Net sales for the segment were $2.0 billion compared with $1.5 billion in fiscal 2007. Adjusted
operating profit for fiscal 2008 was $208 million compared with $259 million last year, with the
increase in ferrous scrap prices flowing through to steel prices. The pre-tax LIFO expense was $110
million in fiscal 2008 compared with a pre-tax LIFO expense of $27 million in fiscal 2007. The four
steel minimills shipped 2.5 million tons in fiscal 2008 compared with 2.3 million tons in the prior
year. Our copper tube mill shipped approximately 52 million pounds in fiscal 2008.
infrastructure
for emerGinG
americas faBrication & distriBution > In fiscal 2008 this segment reported an adjusted operating
economies
loss of $68 million as compared to an adjusted operating profit of $100 million in fiscal 2007. This
was mainly due to rapidly increasing steel prices which caused a massive LIFO expense and margin CMC serves customers in
compression on fixed price contracts. Pre-tax LIFO expense was $197 million for fiscal 2008 emerging markets worldwide,
compared with a pre-tax LIFO expense of $11 million in fiscal 2007. helping nations build
infrastructure; for example,
The steel import distribution business achieved excellent adjusted operating profits, mainly based
CMC serves Polish and nearby
on pipe, tubular goods and merchant product shipments.
markets with its minimill
in Zawiercie, Poland.
Late in the fourth quarter fiscal 2008 we acquired the rebar fabrication businesses of ABC Coating
and RPS (total capacity 300,000 tons).
international mills > This segment includes CMC Zawiercie (Poland) and CMC Sisak (Croatia).
CMC Zawiercie had a record year in adjusted operating profit of $122 million compared with $112
million in fiscal 2007. CMC Zawiercie shipments were a record at 1,434,000 tons in fiscal 2008
compared with 1,366,000 tons in fiscal 2007. Strong demand, both in Poland and export markets,
drove the performance.
CMC Sisak remains a turnaround with an adjusted operating loss of $25 million. Our capex program
targets billet cost and quality with furnace and caster upgrades.
international faBrication & distriBution > Virtually all business units within this segment had
a record year. Combined adjusted operating profit was $124 million, an all-time record driven by
strong demand and rising steel prices in key markets of Europe, North Africa, the Middle East,
Asia and Australia. Our raw materials division had an extraordinary year with strong demand for all
products and rapidly increasing prices. Our China and Inter-Asia business was particularly strong.
financial condition > Our financial position remains strong. In August 2008, we issued $500
million of ten-year notes at 7.29% after the positive effect of interest rate hedging. At August 31,
2008 we had a current ratio of 1.9, contractual borrowing capacity of $372 million under our
revolver ($28 million of letters of credit outstanding), and $200 million unused capacity under
our domestic accounts receivable securitization program. With the fall in metal pricing subsequent
to August 31, we anticipate significant amounts of working capital to be converted to cash to
further supplement our liquidity. Our coverage ratios remain strong, both on domestic borrowings
as well as the separate borrowings of CMCZ.
fiscal 2009 capital plan > We are targeting our capital spending at no more than $450 million
for fiscal 2009. The majority of the spending will be concentrated on the substantial completion
18. 16
of our micro mill in Arizona (scheduled completion September 2009), the development of our new
flexible rolling mill in Poland (scheduled completion January 2010), and the upgrade of our melt
shop and caster in Croatia (scheduled completion July 2009). These projects represent our
confidence in the long-term outlook for the steel industry; however, we will continually monitor the
progress of these projects versus the global economic outlook and our own results of operations.
near-term outlooK > We are uncertain how fiscal 2009 will unfold, but the first few months will
2008 capital
be difficult. The turmoil in global financial markets, the uncertainty of the effects of government
expenditures
intervention, the imminent change in the U.S. administration and a loss of confidence by both
Americas Recycling 18%
consumers and investors clouds our near-term outlook. In the short term, we will face headwinds
Americas Mills 27%
Americas Fabrication until such time as confidence and credit/liquidity issues are stabilized. The U.S. appears to be in a
& Distribution 15%
recession which is getting worse, and Europe is following close behind. Even in emerging countries,
International Mills 36%
growth is slowing appreciably. In the current environment, all aspects of our business will be impacted.
International Fabrication
& Distribution 4%
Our Recycling business will be hit first with tremendous ferrous scrap price decreases and much lower
shipping levels, both impacting margins. Americas Mills should maintain very good metal margins as
ferrous scrap prices have fallen much faster than finished goods prices. However, shipments will be
lower and inventories need to be reduced. Americas Fabrication and Distribution should benefit from
lower steel prices with a margin expansion, at least in the short term. However, the weakening U.S.
non-residential market is likely to impact future shipments.
International Mills, namely CMC Zawiercie (Poland), should maintain reasonable shipping levels
although export billet sales have been greatly reduced due to the downturn in the Middle East.
2008 depreciation
Finished goods prices have dropped faster than ferrous scrap, which will impact metal margins. CMC
and amortization
Sisak (Croatia) should remain a turnaround until such time as a replacement electric arc furnace (EAF)
Americas Recycling 15%
Americas Mills 28% has been installed and the caster modified. International Fabrication and Distribution businesses
Americas Fabrication
overall should remain good, but at a reduced level. The sudden and steep drop in global steel prices
& Distribution 32%
is likely to impact margins and shipments as customers react to the market conditions.
International Mills 22%
International Fabrication
& Distribution 3% We have implemented action plans to reduce working capital, reduce costs and adjust our businesses
to fit market conditions.
lonG-term outlooK > While we are clearly in a recession in the U.S., which is spreading to other
global markets, the long-term outlook remains very positive. Once credit markets and confidence
are restored, we anticipate demand to pick up in emerging countries for steel and raw materials.
The consumption growth rate of steel in emerging countries including China, India, Russia, Brazil,
Central and Eastern Europe, Southeast Asia, North Africa and the Middle East should at least
match the GDP growth rate of these countries and, in many cases, be higher. China will match
steel consumption with production and support certain steel exports, mainly of higher quality steel
products. Global infrastructure growth will be a key driver of our business. Even in the U.S., we
believe there will be more of a focus to improve infrastructure than in the past.
While the U.S. dollar has strengthened recently, we believe over time the dollar should remain
relatively weak as global markets recover. Ocean freight rates, which peaked in May 2008 and
have since fallen sharply, are likely to firm as demand picks up in global markets. A weaker dollar
and firm freight rates are likely to keep steel imports into the U.S. at modest levels. Our steel mills
in the U.S. should remain very competitive as U.S. ferrous scrap is likely to remain among the
lowest priced ferrous scrap in the world.
19. 17
commercial metals company 2008 annual report
We have made and will continue to make significant investments in Greenfield and Brownfield
operations, as well as acquisitions. Once global markets recover, we are positioned to accelerate
our growth by targeting opportunities in key markets. Our vertical integration business model
serves us well during various business cycles as we capture value at each step of the supply chain.
Our product and geographic diversification also enables us to take advantage of opportunities
as they arise.
In summary, we are confident that the secular long-term cycle should continue once confidence
and the credit markets have been restored.
salute to stanley a. raBin > Stan Rabin retired as Chairman of Commercial Metals Company on
August 31, 2008, after 38 years of service. Stan oversaw a period of unprecedented growth for
CMC. His wise, steady leadership, with an emphasis on vertical integration and conservative
financial management, strengthened CMC in American markets and spearheaded our international
cHeers
expansion. His modesty and integrity have won him and the Company admiration around the from tHe
world. We will build on his leadership, and we value his continuing friendship. crowd
The new Dallas Cowboys
cautionary statement > This letter to stockholders contains forward-looking statements regarding
stadium will hold up
the outlook for the Company’s financial results including net earnings, product pricing and demand,
to 100,000 fans; it also
production rates, interest rates, inventory levels, impact of acquisitions and general market conditions.
holds more than 20,000
These forward-looking statements generally can be identified by phrases such as the company or its
tons of rebar, most of it
management “expect,” “anticipates,” “believe,” “ought,” “should,” “likely,” “appears,” “projected,”
supplied by CMC.
“forecast,” “outlook,” “will” or other words or phrases of similar impact. There is inherent risk and
uncertainty in any forward-looking statements. Variances will occur and some could be materially
different from management’s current opinion. Developments that could impact the Company’s
expectations include solvency of financial institutions and their ability or willingness to lend, extent
of government intervention and its effect on capital markets, construction activity, difficulties or
delays in the execution of construction contracts resulting in cost overruns or contract disputes,
metals pricing over which the Company exerts little influence, interest rate changes, increased
capacity and product availability from competing steel minimills and other steel suppliers including
import quantities and pricing, court decisions, industry consolidation or changes in production
capacity or utilization, the ability to integrate acquisitions into operations; global factors including
political and military uncertainties, credit availability, currency fluctuations, energy and supply
prices and decisions by governments impacting the level of steel imports and pace of overall
economic activity, particularly China.
murray r. mcclean
Chairman, President & Chief Executive Officer
November 7, 2008
20. 18
ame rica s
recyclinG
The Americas Recycling segment is one of the United States’ largest
processors of nonferrous scrap metals and one of the largest regional
processors of ferrous scrap metals, with almost 50 scrap metal processing
plants across the country. Nonferrous scrap processing capacity is 530
thousand tons; ferrous scrap processing capacity is 3.0 million tons.
Secondary Metals Processing
Feeder Yards
21. 19
commercial metals company 2008 annual report
Significant investments were made
americas recyclinG during the year to enhance and improve
our recycling operations. Investments
Buoyed by strong domestic and
included paving of roads, new scales
international steel demand, rapidly
and radiation detectors, mobile
escalating ferrous scrap prices, and
equipment, cranes and eddy current
historically high nonferrous prices,
systems. The focus of the investments
CMC Recycling set all-time records for
is to enhance productivity, reduce costs
shipments, revenues and adjusted
and create a safe work environment.
operating profit. The weak U.S. dollar
created the opportunity for significant
Our strategy continues to be focused on
nonferrous exports and niche ferrous
controlling a significant portion of our
exports in containers.
steel minimill scrap requirements,
capturing margins that the market will
This year we made several structural
allow without speculation, outstanding
and organizational changes in the
inventory management and exceeding
recycling business. We successfully
the expectations of our customers.
combined the recycling units formerly
associated with our steel mills with the
CMC Recycling operations. Marketing
was more closely coordinated with our
domestic mills and our international
marketing and distribution segment.
The division created a new Safety and
Security Department to enhance the
safe work environment for all employees.
2008 adjusted 2 0 0 8 c a p i ta l
2008 net sales o p e r at i n G p r o f i t expenditures
18% 29% 18%
americas americas americas
recycling recycling recycling
82% 71% 82%
rest of cmc rest of cmc rest of cmc
22. 20
ame rica s
mills
The Americas Mills segment consists of four steel minimills
with a capacity of 2.5 million tons and a copper tube mill with a capacity
of 80 million pounds. Steel minimill products include structurals,
reinforcing bars, angles, channels and beams. The copper tube mill produces
copper water tube and air conditioning and refrigeration tubing.
Steel Manufacturing
Copper Tube Manufacturing
americas steel mills cmc copper tuBinG
(tons in millions) (pounds in millions)
2.8 90
melted produced
2.5 2.3 2.4 rolled shipped
2.5 75
2.3 2.1
2.4
2.2 2.0 65.7
2.1 shipped
2.0 63.3
60
52.5
1.6 52.3
50.4 46.8
45
1.2
30
0.8
15
0.4
0 0
08
06 07 08
06 07
23. 21
commercial metals company 2008 annual report
CMC Steel Alabama installed a new of one million tons), shipping and
americas mills reheat furnace and supporting revenue. The scrap shredder set a
infrastructure that will result in lower record with production of over 516,000
steel minimills > Fiscal 2008 was
energy consumption. The new plant tons for the year. CMC Steel Texas
another excellent performance year for
entrance was completed that will improve successfully led the way as the first
our domestic minimills as records were
traffic flow and relieve congestion. The operating unit to roll onto SAP. Our first
set for revenue and shipments. Strong
City of Birmingham recognized CMC class of “21st Century Steelmakers”
global steel demand, coupled with a weak
Steel Alabama as the 2007 winner of graduated from an intensive training
U.S. dollar, reduced the attractiveness
the “Five Star Business Award.” program and will assure that CMC has
of imported steel and, for the first time
skilled and talented steelmakers to meet
in many years, opened international
CMC Steel Arizona received the the challenges of the future.
markets for U.S. steel exports. Rapidly
required permits to begin construction
escalating scrap, energy and other input
of the “micro” steel mill in Mesa, copper tuBe mill > CMC Howell Metal
costs led to record LIFO expense
Arizona. Core operations management manufactures copper tubing for the
charges and lower profitability.
and engineering/construction teams plumbing, air conditioning and
have been selected, and construction refrigeration industries. This fully
Safety training and educational efforts
of the innovative plant was initiated. integrated copper minimill utilizes
are yielding continuous progress in
Construction is expected to be primarily secondary copper in the
reducing job-related accidents and
completed by September 2009. manufacturing process. Copper is
injuries. Our goal remains to achieve an
melted, cast, extruded and drawn into
“accident free” workplace. CMC
water and refrigeration tubing, and then
CMC Steel South Carolina set all-time
employees were recognized by the Steel
packaged for sale or further processed
records for production and revenue
Manufacturer’s Association with the
into annealed coils or line sets.
while major cost reduction initiatives
“2008 Achievement in Safety Award”
were implemented including increasing
for their efforts to share a value-based
billet hot charging and improving yield CMC Howell Metal recorded its second
behavioral safety process with other
in both the melt shop and rolling mill. most profitable year ever on the strength
steel mills. CMC Steel South Carolina
The electric arc furnace size was of increased metal spreads with higher
received the “Excellence in Safety
increased to a 95-ton heat resulting in copper prices, value-added products, and
Award” from the state of South Carolina
lower energy consumption, reduced good commercial construction demand.
for 2007. CMC Steel Alabama was
maintenance costs and reduced We increased our geographical footprint
recognized by Manufacture Alabama for
electrode consumption. by expanding sales and distribution
the lowest safety incident rate in the
efforts into the western U.S. and Mexico.
state for the last three consecutive years.
CMC Steel Texas enjoyed an exceptional We also opened two new warehouse
year and set all-time records for distribution centers in Texas and
shredder production, melting (just shy became a master distributor of steel pipe.
2008 adjusted 2 0 0 8 c a p i ta l
2008 net sales o p e r at i n G p r o f i t expenditures
16% 41% 27%
americas mills americas mills americas mills
84% 59% 73%
rest of cmc rest of cmc rest of cmc
24. 22
ame rica s
faBrication
& distriBution
The Americas Fabrication and Distribution segment includes rebar
and structural fabrication plants, joist and deck plants, a castellated and
cellular beam fabricator, fence post manufacturing plants, heat-treating
plants and construction-related product warehouses, as well as a division
devoted to the domestic import and export of steel. Steel fabrication
capacity exceeds 2.0 million tons.
Steel Fabrication
Steel Joist and Deck Plants
Fence Post Manufacturing
Heat Treating
Castellated and Cellular Beam Fabricator
Distribution
Construction-Related Products Warehousing
25. 23
commercial metals company 2008 annual report
new warehouses/showrooms in Boise,
pre-stressed concrete strand business
americas faBrication Idaho and Salt Lake City, Utah. Three
on the West Coast.
& distriBution
branch distribution warehouses were
relocated to higher traffic locations.
Revenue and adjusted operating profit
reBar and structural
for our structural fabrication operations
faBrication > Our rebar fabrication
were up significantly for the year on a distriBution > On the strength of
operations set a new revenue record as
17% increase in shipments. energy-related products, CMC Dallas
sales increased 21% above last year’s
Trading recorded all-time record profits.
record level. Placed rebar tons increased
joist & decK > Sales revenues and The distribution warehouse in Houston,
24%, primarily in the western U.S.
shipments increased 20% and 16%, Texas and the new office in Mexico City
Profitability suffered as the rapid
gained momentum and made significant
respectively, while adjusted operating
escalation of material costs resulted
contributions to the division’s bottom
profit remained consistent with the
in significant LIFO charges as well as
line. We entered the rebar distribution
prior year. The increase in input material
job loss expense reserves as selling
business in the western U.S. We
costs caused margin compression in the
prices could not keep pace.
joist manufacturing operations while established a Latin America manager
our deck operations had a solid year to capitalize on existing opportunities
Construction and start up of a new “mini”
and contributed substantially to profits. and to develop/enhance our South
rebar fabrication shop in Savannah,
American strategy.
Georgia, was completed. The mini rebar
post > Our post operations set an
concept allows us to penetrate under-
all-time earnings record with a 21% CMC Impact Metals, a heat treating
served or potential growth markets. Our
increase in revenues and a 3% increase operation, recorded a decline in revenue
capital investment is typically small (a
in shipments. The performance was and profitability due to a significant
leased facility with a shearline and
aided by a significant reduction in downturn in the transportation business.
benders) and concentrates on smaller
imports and a very strong fourth quarter More encouraging, however, it developed
tonnage jobs. We also began construction
performance. A new post line was business for the heat treatment of
of new rebar fabrication shops in Baton
installed at the Texas plant resulting in armor plate for vehicles destined for
Rouge, Louisiana (hurricane rebuilding)
a 15% increase in efficiency. Our South military use.
and Mesa, Arizona (to complement our
Carolina post plant is preparing to
micro mill) along with the enhancement
install a similar line.
and upgrading of several other shops.
construction-related products
During fiscal 2008 we acquired Rebar
(crp) > Revenues for the year were up
Service and Supply in Ft. Worth, Texas,
over 18% and adjusted operating profit
RPS headquartered in Claremont,
increased 47%. Earnings were enhanced
California, and ABC Coating companies
through movement into higher value-
headquartered in Waxahachie, Texas.
added engineering services and
The addition of these operations
aggressive cost reduction measures.
increased our rebar fabrication capacity
We acquired a new location in Denver,
by 350,000 tons per year and signifi-
Colorado and began construction of
cantly expanded our presence in the
2 0 0 8 c a p i ta l
2008 net sales expenditures
24% 15%
americas fabrication americas fabrication
& distribution & distribution
76% 85%
rest of cmc rest of cmc
26. 24
i n t e r n at i o n a l
mills
The International Mills segment is comprised of three mills located in
Poland and Croatia. The Polish mills, CMC Zawiercie S.A. (CMCZ), have
a capacity of 1.1 million metric tons and are the second largest steel
producers in Poland, manufacturing primarily rebar, wire rod and
merchants. CMC Sisak, in Croatia, has an annual capacity of 300,000
metric tons and produces seamless, welded and cold processed pipe.
Steel Manufacturing
Pipe & Tube Mill
Processing
i n t e r n at i o n a l s t e e l m i l l s
(tons in millions)
1.6 melted
1.5
1.5
1.4
1.2
1.4 rolled
1.5
1.1
1.3
1.2
1.2
shipped
1.1
1.0
0.8
0.6
0.4
0.2
0
08
06 07
27. 25
commercial metals company 2008 annual report
As a result, our metal margin increased Our investment continues. Late in the
international mills during the second half of the fiscal year, fiscal year we undertook the replacement
producing an all-time quarterly record of the current electric arc furnace and
Our Polish minimill, CMC Zawiercie
in operating profit for the fourth quarter. upgrade of the continuous caster; this
S.A. (CMCZ), delivered a very strong
should be completed within fiscal
operational performance in fiscal 2008.
CMCZ continued its extensive investment 2009. These improvements will allow
It set an all-time record in safety
program in fiscal 2008. The wire rod the mill to lower its production costs,
statistics as well as in shipments and
block is at the final stage of completion increase efficiency, eliminate reliance on
production volume. During fiscal 2008,
while the new flexible section mill is at outside suppliers, and create sufficient
we melted 1.5 million tons, rolled 1.1
an early stage of construction. These melting capacity for future growth.
million tons, and shipped 1.4 million
capital investments will enable us to
tons. Since acquisition, we have
produce higher quality products with
sustainably grown in terms of output
increased flexibility in meeting
and operating profit. CMCZ maintained
changing market conditions. In early
its position as the second largest steel
2010, our melting and rolling capacity
producer in Poland, producing rebar,
should be in balance. We were the first
wire rod and merchant bars.
international operation to roll onto SAP.
One of the key success factors during
With the acquisition of the Croatian
fiscal 2008 was the implementation of
pipe mill in September 2007, CMC has
our vertical integration model. We
established its base in southeast
increased our upstream and downstream
Europe, a region with excellent growth
capacity through acquisitions and
potential. CMC Sisak’s first year of
Greenfield projects. Our captive
operation was an investment for the
recycling operations provided us 45%
future. Operational efficiencies, product
of our total scrap needs. We placed 8%
quality and customer acceptance gained
of our finished goods shipments
throughout the year. More importantly,
through our rebar fabrication plants
we enhanced the safety environment
in Poland and Germany and our Polish
for our employees through facility
mesh plant.
upgrades, training and constant
reinforcement of our culture of safety.
Steel demand by markets in the Middle
East and Russia limited the import of
long products from outside of the
European Union to our core markets.
2008 adjusted 2 0 0 8 c a p i ta l
2008 net sales o p e r at i n G p r o f i t expenditures
10% 19% 36%
international international international
mills mills mills
90% 81% 64%
rest of cmc rest of cmc rest of cmc
28. 26
i n t e r n at i o n a l
faBrication
& distriBution
The International Fabrication and Distribution segment functions as a global
marketing channel for metal producers and fabricators. This segment markets,
distributes and processes primary and secondary metals, steels, ores, concentrates,
industrial minerals, ferroalloys, chemicals and industrial products. Fabrication
and Distribution operates through a global network of marketing and distribution
offices, processing facilities and other investments and joint ventures.
Marketing & Distribution
Processing
Representative Offices
Agents
Investments & Joint Ventures
Rebar Fab
Mesh
Scrap Processing
29. 27
commercial metals company 2008 annual report
The Australian businesses of CMC fabrication plant in Dabrowa Górnicza
international faBrication
include raw materials, steel trading and nearby Zawiercie with an annual
& distriBution
warehousing as well as service centers. capacity of 90,000 metric tons of
These well-established facilities, finished product which will serve as a
A dynamic global economic surge,
strategically located throughout the further downstream outlet for our mill
characterized by volatile commodity and
country, captured great opportunities and allow us to jointly market rebar
steel prices linked with fluctuating
from the ongoing mining and resources and mesh.
currencies, afforded opportunities for
boom. All businesses performed very
the European marketing and distribution
strongly in an environment of regional Our German fabrication shop in
offices in Zug, Switzerland, Sandbach,
mill shortages and unprecedented Rosslau achieved record shipments of
United Kingdom and Kürten, Germany
price rises. cut and bent rebar, piles and mesh sold
to achieve record earnings. Our global
in fiscal 2008. Through adding new
infrastructure, product and geographical
Fiscal 2008 was a record year in shear lines and upgrading our facility,
diversification, but most especially our
terms of sales and earnings for our we have become one of the dominant
professionals’ competencies, creativity
international raw materials import fabrication shops in the eastern part of
and discipline were the key elements to
business. We benefited from robust Germany allowing us to be a strong
our sustainable growth. The joint
global demand, strong supplier partner for the construction companies
marketing of value-added long products
relationships, market intelligence, and involved in major infrastructure projects
originating from the Czech steelworks
continuing efforts in research and such as the new airport project in Berlin.
Trinecke Zelezarny to Germany and the
development of new product offerings.
United Kingdom remained successful.
Our rebar fabrication shop in Zawiercie,
Our operations in Asia focused on
Poland, increased its tonnage and
supporting our core business activities
remained profitable while distinguishing
through sourcing steel and raw materials
itself by elevating service levels and
for our global marketing and distribution
reliability. Construction is underway on
operations. In addition, we continued
our shop near Warsaw which should be
to market steel and raw materials
operational by the end of calendar
within Asia through our offices in
2008. This will increase our capacity in
Singapore. During fiscal 2008, we
Poland to over 80,000 metric tons per
purchased a steel recycling business
year of cut and bent material which will
in S.E. Asia to support our business
give us a market share of just below 10%.
with regional mills.
In June 2008, we acquired a mesh
2008 adjusted 2 0 0 8 c a p i ta l
o p e r at i n G p r o f i t
2008 net sales expenditures
32% 24% 4%
international international international
fabrication & distribution fabrication & distribution fabrication & distribution
68% 76% 96%
rest of cmc rest of cmc rest of cmc
30. 28
cmc manaGement
cmc americas Russ Rinn, Bob Unfried, Jim Fritsch, Gary Liebeskind
americas recyclinG Dale Schmelzle, Rocky Adams, Brian Halloran, Bob Melendi, Larry Olschwanger, Alan Postel
Dennis Arruebarrena, Philip Bush, Philip Johnson, Chuck Miller, Stewart Miller, Doug Young, Stan Young
americas mills Avery Hilton, Mike Buckentin, Steve Henderson, Dennis Malatek, Phil Seidenberger, Stephen Weaver, Jim Forkovitch
americas faBrication & distriBution Matt Kramer, Karl Schoenleber, Binh Huynh, Rick Jenkins, Tracy Porter, John Richey
31. 29
commercial metals company 2008 annual report
cmc international Hanns Zöllner, Hans-Ruedi Meuwly, Roland Wismer, Jose Puente
international mills Ludovit Gajdos, Jerzy Kozicz, Pasko Vela
international faBrication & distriBution Kevin Aitken, K.L. Chan, Jimmy Dee, Weston Liu
Peter Muller, Jason Ellis, Matt Stedman, Eli Skornicki, Eugene Vastola, Peter Weyermann
32. 30
selected financial data
2008 2007 2006 2005
(IN THOUSANDS, EXCEPT SHARE DATA)
operations
Net sales1 $ 10,427,378 $ 8,329,016 $ 7,212,152 $ 6,260,338
Net earnings 231,966 355,431 356,347 285,781
Income taxes 104,807 171,038 187,937 157,996
Earnings before income taxes 337,311 536,056 554,493 443,033
Interest expense 59,488 37,257 29,569 31,187
Depreciation and amortization 135,069 107,305 85,378 76,610
EBITDA2 531,330 671,031 659,231 551,575
EBITDA/interest expense 8.9 18.0 22.3 17.7
Effective tax rate 31.1% 31.9% 33.9% 35.7%
Balance sHeet information
Cash and cash equivalents 219,026 419,275 180,719 119,404
Accounts receivable 1,369,453 1,082,713 1,134,823 829,192
Inventories 1,400,332 874,104 762,635 706,951
Total current assets 3,217,443 2,458,852 2,144,792 1,700,917
Property, plant and equipment
Original cost 2,095,713 1,590,324 1,335,614 1,200,742
Net of depreciation and amortization 1,154,322 767,353 588,686 505,584
Capital expenditures 355,041 206,262 131,235 110,214
Total assets 4,746,371 3,472,663 2,898,868 2,332,922
Commercial paper — — — —
Notes payable 31,305 — 60,000 —
Total current liabilities 1,732,481 1,072,589 1,182,305 891,942
Net working capital 1,484,962 1,386,263 962,486 808,975
Current ratio 1.9 2.3 1.8 1.9
Acid test ratio 0.9 1.4 1.1 1.1
Long-term debt3 1,197,533 706,817 322,086 386,741
Long-term debt as a percent of total capitalization4 41.5% 30.9% 20.4% 29.0%
Total debt/total capitalization plus short-term debt4 44.2% 31.0% 26.1% 29.5%
Long-term deferred income tax liability 50,160 31,977 34,550 45,629
Total stockholders’ equity 1,638,383 1,548,567 1,220,104 899,561
Total capitalization4 2,886,076 2,287,361 1,576,740 1,331,930
Return on beginning stockholders’ equity 15.0% 29.1% 39.6% 43.3%
Stockholders’ equity per share5 14.40 13.06 10.35 7.74
sHare information
Diluted earnings per share5 1.97 2.92 2.89 2.32
Stock dividends/splits per share — — 100% 100%
Cash dividends per share of common stock5 0.45 0.33 0.17 0.12
Total cash dividends paid 52,061 39,254 20,212 13,652
Average diluted common shares5 117,685,753 121,681,730 123,459,069 123,380,174
otHer data
Number of employees at year-end 15,276 12,730 11,773 10,882
Stockholders of record at year-end 4,233 3,650 3,486 2,985
Net sales from continuing operations Total capitalization = total long-term debt + deferred income taxes + total stockholders’ equity
1 4
EBITDA = earnings before interest expense, income taxes, depreciation and amortization Restated for stock splits
2 5
Excluding current portion
3