This document provides specifications for the CLAAS Dominator 106 combine harvester including technical data, dimensions, weights, settings, and capacities. It includes information on the cutterbar, threshing equipment, straw walkers, cleaning system, engines, transmission, hydraulics, electrical system, and dimensions in both operating and transport positions. Technical details are provided for various configurations including different cutting widths and attachments like maize picker heads and straw choppers.
Este documento fornece especificações técnicas detalhadas para um veículo RK 406, incluindo: um motor diesel de 84HP, transmissão manual de 4 marchas, capacidade de carga de 0,89m3, alcance de escavação de 4,35m, tanque de combustível de 160 litros, e dimensões de 7,07m x 2,27m x 3,48m.
- The document provides removal and installation instructions for various engine components including the timing chain, oil pan, cylinder head, and engine.
- Removal of the timing chain requires draining coolant and removing various belts, hoses, wires and covers to access the timing chain components.
- Oil pan removal involves draining oil, removing mounting bolts and using a special tool to separate the oil pan from the engine block.
- Cylinder head removal requires removing additional parts like the intake manifold, spark plugs and distributor after setting the piston to top dead center.
Este documento proporciona especificaciones técnicas detalladas para los motores Kappa 1.0, 1.2 y 1.25, incluyendo dimensiones de válvulas, pistones, cigüeñal, bloque de motor y otros componentes. También especifica cantidades de aceite y refrigerante, grados de aceite recomendados, presiones de aceite, temperaturas de operación y pares de apriete para varias partes del motor.
Este documento proporciona instrucciones para la calibración de válvulas e inyector de un motor Caterpillar 3516B de 16 cilindros en V con 69.1 L de cilindrada. Describe la ubicación y configuración de las válvulas y cilindros, el procedimiento para quitar y colocar la tapa de válvulas, y los parámetros de ajuste para el mecanismo y juego de válvulas. También cubre la rotación del cigüeñal, sincronización del árbol de levas y procedim
[1] O documento descreve o sistema de combustível com unidade de injeção PDE e EDC S6 em veículos Scania, incluindo o trajeto do combustível e os principais componentes como a bomba de alimentação, coletor de combustível, unidades de injeção e filtro de combustível. [2] Explica também o funcionamento da unidade de injeção durante as fases de enchimento, derramamento, injeção e redução da pressão controladas pela válvula de combustível. [3] Por fim, fornece detalhes sobre o
The document discusses how anti-lock braking systems (ABS) work to prevent wheel lockup and maintain vehicle control during braking. It explains that ABS uses wheel speed sensors and a control module to pulse the brakes up to 15 times per second to prevent skidding. This allows the driver to brake hard and steer at the same time for safer stopping on any road surface.
Manual de manutenção de caminhões eletrônicosMarcelo Auler
O documento fornece informações sobre manutenção de caminhões de diferentes marcas e modelos, incluindo Volvo, Scania, Mercedes Benz e Iveco, com detalhes sobre sistemas de injeção, sensores e procedimentos de regulagem de válvulas.
Este documento fornece especificações técnicas detalhadas para um veículo RK 406, incluindo: um motor diesel de 84HP, transmissão manual de 4 marchas, capacidade de carga de 0,89m3, alcance de escavação de 4,35m, tanque de combustível de 160 litros, e dimensões de 7,07m x 2,27m x 3,48m.
- The document provides removal and installation instructions for various engine components including the timing chain, oil pan, cylinder head, and engine.
- Removal of the timing chain requires draining coolant and removing various belts, hoses, wires and covers to access the timing chain components.
- Oil pan removal involves draining oil, removing mounting bolts and using a special tool to separate the oil pan from the engine block.
- Cylinder head removal requires removing additional parts like the intake manifold, spark plugs and distributor after setting the piston to top dead center.
Este documento proporciona especificaciones técnicas detalladas para los motores Kappa 1.0, 1.2 y 1.25, incluyendo dimensiones de válvulas, pistones, cigüeñal, bloque de motor y otros componentes. También especifica cantidades de aceite y refrigerante, grados de aceite recomendados, presiones de aceite, temperaturas de operación y pares de apriete para varias partes del motor.
Este documento proporciona instrucciones para la calibración de válvulas e inyector de un motor Caterpillar 3516B de 16 cilindros en V con 69.1 L de cilindrada. Describe la ubicación y configuración de las válvulas y cilindros, el procedimiento para quitar y colocar la tapa de válvulas, y los parámetros de ajuste para el mecanismo y juego de válvulas. También cubre la rotación del cigüeñal, sincronización del árbol de levas y procedim
[1] O documento descreve o sistema de combustível com unidade de injeção PDE e EDC S6 em veículos Scania, incluindo o trajeto do combustível e os principais componentes como a bomba de alimentação, coletor de combustível, unidades de injeção e filtro de combustível. [2] Explica também o funcionamento da unidade de injeção durante as fases de enchimento, derramamento, injeção e redução da pressão controladas pela válvula de combustível. [3] Por fim, fornece detalhes sobre o
The document discusses how anti-lock braking systems (ABS) work to prevent wheel lockup and maintain vehicle control during braking. It explains that ABS uses wheel speed sensors and a control module to pulse the brakes up to 15 times per second to prevent skidding. This allows the driver to brake hard and steer at the same time for safer stopping on any road surface.
Manual de manutenção de caminhões eletrônicosMarcelo Auler
O documento fornece informações sobre manutenção de caminhões de diferentes marcas e modelos, incluindo Volvo, Scania, Mercedes Benz e Iveco, com detalhes sobre sistemas de injeção, sensores e procedimentos de regulagem de válvulas.
Este documento fornece informações técnicas sobre os componentes elétricos e eletrônicos do sistema de injeção eletrônica de um Renault 19 16V, incluindo valores de teste para sinais, sensores e componentes como bobina de ignição, eletroinjetores e válvulas.
Adaptive Cruise Control, Electronic Brake Force Distribution,Traction Control...Shubham Thakur
In this PPT All the modern controls are explained like
Adaptive Cruise Control, Electronic Brake Force Distribution,Traction Control System, Electronic Stability Control, Common Rail Direct Fuel Distribution, Turbocharged Direct Injection, Airbag
Este documento es un manual para conductores que contiene información sobre varios sistemas y componentes de un vehículo, incluidos los instrumentos, sistemas de arranque y frenado, cabina, y procedimientos en caso de emergencia. También incluye secciones sobre conducción económica y cuidado del medio ambiente.
Este documento proporciona especificaciones técnicas detalladas para los motores Volvo D12C y D12D, incluidas sus dimensiones, características de funcionamiento, componentes y tolerancias. Se describen aspectos como el número de cilindros, diámetro y carrera del motor, relación de compresión, peso, variantes disponibles y especificaciones para el bloque del motor, culatas, camisas, pistones, segmentos y otros componentes.
Este documento describe el sistema de suspensión neumática de 4 niveles del Audi allroad quattro. El sistema permite variar la altura libre sobre el suelo en 66 mm entre 4 niveles definidos. Se controla electrónicamente y cuenta con sensores, electroválvulas, un acumulador de presión y una unidad de control. El sistema mantiene constante el nivel seleccionado independientemente de la carga del vehículo.
This document provides an overview of anti-lock braking systems (ABS). It describes how ABS works by using sensors to monitor wheel speed and modulate brake pressure to prevent wheels from locking up during braking. The key components of ABS are an electronic control module, wheel speed sensors, hydraulic modulator valves, and pumps. ABS improves vehicle control and stopping distances on slippery surfaces by limiting wheel slip through rapidly pulsing the brakes up to 15 times per second. The document outlines different types of ABS systems and their advantages in improving stability and control compared to non-ABS braking.
El documento proporciona información sobre la identificación de vehículos Scania a través de sus códigos y números de serie. Explica la ubicación y significado de los códigos del tipo de chasis, placas VIN, y números de serie del chasis, motor y transmisión para camiones Scania y autobuses Scania con carrocería Marcopolo.
El documento describe los diferentes tipos de embrague utilizados en los vehículos, incluyendo embragues de fricción, de muelles helicoidales, de diafragma y automáticos. Explica que el embrague conecta y desconecta la transmisión de energía mecánica entre el motor y las ruedas, y es necesario para cambiar de velocidad o detener el vehículo sin apagar el motor. También detalla las partes principales de un embrague de fricción como el disco, plato de presión y carcasa, así como su funcionamiento.
Este documento presenta información sobre el diagnóstico y reparación de los sistemas de dirección, suspensión y frenos en vehículos livianos. Se describen los objetivos del curso, las normas de convivencia, y se detallan las tareas que incluyen realizar el diagnóstico y reparación del sistema de suspensión, realizar diagnóstico del sistema de dirección asistida hidráulicamente, y realizar alineamiento del sistema de dirección. También se explican conceptos relacionados a estos sistemas como suspensión neumática
This document is a workshop manual that provides safety precautions, general information, and repair instructions for Volvo Penta MD6A and MD7A marine diesel engines. It contains technical specifications, descriptions of the engine models, and guidance for repairing electrical systems, with special tools also noted. Personnel are advised to thoroughly read the safety section before working on engines, which details risks like hot surfaces, high-pressure fuel lines, and proper protective equipment. The manual stresses immobilizing engines and using lifting eyes/beams for safe component removal.
Te voy a platicar que hace una semana llegó en remolque a mi taller una ford ...Roberto Soto
Una camioneta Ford F-250 Super Duty de 2003 no encendía debido a que una conexión a tierra cerca del cilindro de frenos estaba oxidada, cortando la señal de tierra necesaria para el funcionamiento del sistema. Al reemplazar el tornillo oxidado, la camioneta encendió normalmente, resolviéndose el problema eléctrico de manera rápida gracias a la consulta del diagrama de encendido electrónico.
This document provides specifications and removal/installation instructions for various engine components of a KA24DE engine. It includes sections on the engine room covers, drive belts, air cleaner, throttle body, intake manifold, exhaust manifold, oil pan, spark plugs, fuel injector, rocker cover, camshaft, timing chains, cylinder head, engine assembly, cylinder block, and service data/specifications. The document provides a comprehensive technical guide for working on and servicing parts of this particular engine.
Case ih case international 5140 tractor service repair manualfjjsieskekfmmse
This document provides service information for Case/International tractor models 5120, 5130, and 5140. It includes an index listing components by section and paragraph number. A condensed service data table provides specifications for engine, transmission, and other components. Paragraphs 1-4 provide instructions for servicing front wheel bearings, steering knuckles, tie rods/toe-in adjustment, and removing the axle main member on two-wheel drive models.
El documento proporciona información sobre ruedas, neumáticos, llantas y sus componentes. Explica los diferentes tipos de llantas y neumáticos, sus características y funciones. También describe conceptos como la presión de los neumáticos, el desgaste, la deriva, la estabilidad y el aquaplaning.
Este documento proporciona una descripción del funcionamiento de varios tipos de cajas de cambios automáticas de Scania. Explica que las cajas de cambios GR, GRS y GRSO tienen secciones de engranajes principales y planetarios, y que algunas tienen mecanismos de split y marchas superlentas. También describe los componentes clave como los ejes primario, secundario e intermedio, y explica cómo funcionan la sincronización y el cambio de marchas.
CASE SR200 SKID STEER LOADER Service Repair Manualjkskmdkemde
This is the Highly Detailed factory service repair manual for theCASE SR200 SKID STEER LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE SR200 SKID STEER LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Hydraulic, Pneumatic, Electrical, Electronic System
Engine and PTO IN
Transmission, Drive and PTO OUT
Axles, Brakes and Steering
Frame and Cab
Frame Positioning
Hitch and Working Tool
Excavating and Landscaping
Schemas Index
Special Tool Index
Electrical Schematic –EH
Electrical Schematic -MECH
Hydraulic / Hydrostatic Detailed Views
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE SR200 SKID STEER LOADER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
This is the Highly Detailed factory service repair manual for the2003 IVECO DAILY 3, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2003 IVECO DAILY 3 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Transmission
Propeller Shafts
Rear Axles
Axles
Suspensions
Wheel and Tyres
Steering Gear
Hydro Pneumatic System
Brakes
Bodywork
Chassis Frame
Cab
Air Conditioning
Scheduled Maintenance
Electric System
Electronic System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2003 IVECO DAILY 3 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Este documento proporciona información sobre el funcionamiento y diagnóstico de las transmisiones automáticas AG4 de Volkswagen. Explica cómo funcionan los embragues, frenos y convertidor de par, así como los controles electrónicos y procedimientos de diagnóstico. El resumen principal es que la transmisión utiliza embragues y frenos hidráulicos para cambiar las velocidades, y la unidad de control electrónica monitorea los sensores para controlar las electroválvulas y lograr cambios de velocidad suaves. El diagnóstico
El documento proporciona información sobre el sistema antibloqueo de frenos (ABS). Explica que el ABS controla la presión de frenado aplicada a las ruedas para evitar el bloqueo mediante el uso de sensores y una central electrónica. Describe los diferentes tipos de sensores, cómo funciona el sistema hidráulicamente para modular la presión de frenado y mantener la estabilidad del vehículo, y las ventajas que proporciona el ABS sobre un sistema de frenos tradicional.
This is the Highly Detailed factory service repair manual for theCATERPILLAR CAT 938F WHEEL LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CATERPILLAR CAT 938F WHEEL LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Models Cover:
938F Wheel Loader 7SN00001-UP (MACHINE) POWERED BY 3116 Engine
Service Repair Manual Covers:
General Service Information
Disassembly and Assembly
Testing and Adjusting
Troubleshooting
Systems Operation
Torque Specifications
Specifications
Schematic
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCATERPILLAR CAT 938F WHEEL LOADER Service Repair Workshop Manual.
Thanks for visiting!
This document provides a parts list for a Massey Ferguson MF 690 tractor from 1984. It includes 34 items related to the cylinder block of the A4.248 engine, with part numbers, quantities, descriptions and comments. It also lists 20 items for the crankshaft, pistons and connecting rods and provides additional pages listing parts for other engine systems like the cylinder head, water outlets, and rocker shaft.
This document provides part numbers and descriptions for replacement parts for a Massey Ferguson MF 675 tractor from 1984. It includes lists of parts for the engine accessories, guards, fan, cylinder block, crankshaft and other engine components. Each item lists the part number, quantity, description and any comments about the part.
Este documento fornece informações técnicas sobre os componentes elétricos e eletrônicos do sistema de injeção eletrônica de um Renault 19 16V, incluindo valores de teste para sinais, sensores e componentes como bobina de ignição, eletroinjetores e válvulas.
Adaptive Cruise Control, Electronic Brake Force Distribution,Traction Control...Shubham Thakur
In this PPT All the modern controls are explained like
Adaptive Cruise Control, Electronic Brake Force Distribution,Traction Control System, Electronic Stability Control, Common Rail Direct Fuel Distribution, Turbocharged Direct Injection, Airbag
Este documento es un manual para conductores que contiene información sobre varios sistemas y componentes de un vehículo, incluidos los instrumentos, sistemas de arranque y frenado, cabina, y procedimientos en caso de emergencia. También incluye secciones sobre conducción económica y cuidado del medio ambiente.
Este documento proporciona especificaciones técnicas detalladas para los motores Volvo D12C y D12D, incluidas sus dimensiones, características de funcionamiento, componentes y tolerancias. Se describen aspectos como el número de cilindros, diámetro y carrera del motor, relación de compresión, peso, variantes disponibles y especificaciones para el bloque del motor, culatas, camisas, pistones, segmentos y otros componentes.
Este documento describe el sistema de suspensión neumática de 4 niveles del Audi allroad quattro. El sistema permite variar la altura libre sobre el suelo en 66 mm entre 4 niveles definidos. Se controla electrónicamente y cuenta con sensores, electroválvulas, un acumulador de presión y una unidad de control. El sistema mantiene constante el nivel seleccionado independientemente de la carga del vehículo.
This document provides an overview of anti-lock braking systems (ABS). It describes how ABS works by using sensors to monitor wheel speed and modulate brake pressure to prevent wheels from locking up during braking. The key components of ABS are an electronic control module, wheel speed sensors, hydraulic modulator valves, and pumps. ABS improves vehicle control and stopping distances on slippery surfaces by limiting wheel slip through rapidly pulsing the brakes up to 15 times per second. The document outlines different types of ABS systems and their advantages in improving stability and control compared to non-ABS braking.
El documento proporciona información sobre la identificación de vehículos Scania a través de sus códigos y números de serie. Explica la ubicación y significado de los códigos del tipo de chasis, placas VIN, y números de serie del chasis, motor y transmisión para camiones Scania y autobuses Scania con carrocería Marcopolo.
El documento describe los diferentes tipos de embrague utilizados en los vehículos, incluyendo embragues de fricción, de muelles helicoidales, de diafragma y automáticos. Explica que el embrague conecta y desconecta la transmisión de energía mecánica entre el motor y las ruedas, y es necesario para cambiar de velocidad o detener el vehículo sin apagar el motor. También detalla las partes principales de un embrague de fricción como el disco, plato de presión y carcasa, así como su funcionamiento.
Este documento presenta información sobre el diagnóstico y reparación de los sistemas de dirección, suspensión y frenos en vehículos livianos. Se describen los objetivos del curso, las normas de convivencia, y se detallan las tareas que incluyen realizar el diagnóstico y reparación del sistema de suspensión, realizar diagnóstico del sistema de dirección asistida hidráulicamente, y realizar alineamiento del sistema de dirección. También se explican conceptos relacionados a estos sistemas como suspensión neumática
This document is a workshop manual that provides safety precautions, general information, and repair instructions for Volvo Penta MD6A and MD7A marine diesel engines. It contains technical specifications, descriptions of the engine models, and guidance for repairing electrical systems, with special tools also noted. Personnel are advised to thoroughly read the safety section before working on engines, which details risks like hot surfaces, high-pressure fuel lines, and proper protective equipment. The manual stresses immobilizing engines and using lifting eyes/beams for safe component removal.
Te voy a platicar que hace una semana llegó en remolque a mi taller una ford ...Roberto Soto
Una camioneta Ford F-250 Super Duty de 2003 no encendía debido a que una conexión a tierra cerca del cilindro de frenos estaba oxidada, cortando la señal de tierra necesaria para el funcionamiento del sistema. Al reemplazar el tornillo oxidado, la camioneta encendió normalmente, resolviéndose el problema eléctrico de manera rápida gracias a la consulta del diagrama de encendido electrónico.
This document provides specifications and removal/installation instructions for various engine components of a KA24DE engine. It includes sections on the engine room covers, drive belts, air cleaner, throttle body, intake manifold, exhaust manifold, oil pan, spark plugs, fuel injector, rocker cover, camshaft, timing chains, cylinder head, engine assembly, cylinder block, and service data/specifications. The document provides a comprehensive technical guide for working on and servicing parts of this particular engine.
Case ih case international 5140 tractor service repair manualfjjsieskekfmmse
This document provides service information for Case/International tractor models 5120, 5130, and 5140. It includes an index listing components by section and paragraph number. A condensed service data table provides specifications for engine, transmission, and other components. Paragraphs 1-4 provide instructions for servicing front wheel bearings, steering knuckles, tie rods/toe-in adjustment, and removing the axle main member on two-wheel drive models.
El documento proporciona información sobre ruedas, neumáticos, llantas y sus componentes. Explica los diferentes tipos de llantas y neumáticos, sus características y funciones. También describe conceptos como la presión de los neumáticos, el desgaste, la deriva, la estabilidad y el aquaplaning.
Este documento proporciona una descripción del funcionamiento de varios tipos de cajas de cambios automáticas de Scania. Explica que las cajas de cambios GR, GRS y GRSO tienen secciones de engranajes principales y planetarios, y que algunas tienen mecanismos de split y marchas superlentas. También describe los componentes clave como los ejes primario, secundario e intermedio, y explica cómo funcionan la sincronización y el cambio de marchas.
CASE SR200 SKID STEER LOADER Service Repair Manualjkskmdkemde
This is the Highly Detailed factory service repair manual for theCASE SR200 SKID STEER LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE SR200 SKID STEER LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
Hydraulic, Pneumatic, Electrical, Electronic System
Engine and PTO IN
Transmission, Drive and PTO OUT
Axles, Brakes and Steering
Frame and Cab
Frame Positioning
Hitch and Working Tool
Excavating and Landscaping
Schemas Index
Special Tool Index
Electrical Schematic –EH
Electrical Schematic -MECH
Hydraulic / Hydrostatic Detailed Views
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE SR200 SKID STEER LOADER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
This is the Highly Detailed factory service repair manual for the2003 IVECO DAILY 3, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2003 IVECO DAILY 3 Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Transmission
Propeller Shafts
Rear Axles
Axles
Suspensions
Wheel and Tyres
Steering Gear
Hydro Pneumatic System
Brakes
Bodywork
Chassis Frame
Cab
Air Conditioning
Scheduled Maintenance
Electric System
Electronic System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2003 IVECO DAILY 3 Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Este documento proporciona información sobre el funcionamiento y diagnóstico de las transmisiones automáticas AG4 de Volkswagen. Explica cómo funcionan los embragues, frenos y convertidor de par, así como los controles electrónicos y procedimientos de diagnóstico. El resumen principal es que la transmisión utiliza embragues y frenos hidráulicos para cambiar las velocidades, y la unidad de control electrónica monitorea los sensores para controlar las electroválvulas y lograr cambios de velocidad suaves. El diagnóstico
El documento proporciona información sobre el sistema antibloqueo de frenos (ABS). Explica que el ABS controla la presión de frenado aplicada a las ruedas para evitar el bloqueo mediante el uso de sensores y una central electrónica. Describe los diferentes tipos de sensores, cómo funciona el sistema hidráulicamente para modular la presión de frenado y mantener la estabilidad del vehículo, y las ventajas que proporciona el ABS sobre un sistema de frenos tradicional.
This is the Highly Detailed factory service repair manual for theCATERPILLAR CAT 938F WHEEL LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CATERPILLAR CAT 938F WHEEL LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Models Cover:
938F Wheel Loader 7SN00001-UP (MACHINE) POWERED BY 3116 Engine
Service Repair Manual Covers:
General Service Information
Disassembly and Assembly
Testing and Adjusting
Troubleshooting
Systems Operation
Torque Specifications
Specifications
Schematic
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCATERPILLAR CAT 938F WHEEL LOADER Service Repair Workshop Manual.
Thanks for visiting!
This document provides a parts list for a Massey Ferguson MF 690 tractor from 1984. It includes 34 items related to the cylinder block of the A4.248 engine, with part numbers, quantities, descriptions and comments. It also lists 20 items for the crankshaft, pistons and connecting rods and provides additional pages listing parts for other engine systems like the cylinder head, water outlets, and rocker shaft.
This document provides part numbers and descriptions for replacement parts for a Massey Ferguson MF 675 tractor from 1984. It includes lists of parts for the engine accessories, guards, fan, cylinder block, crankshaft and other engine components. Each item lists the part number, quantity, description and any comments about the part.
Massey ferguson mf 565 combines parts catalogue manualfjjsekwsxkdmmem
The document contains parts lists and technical specifications for Massey Ferguson MF 560/565 combines. It lists over 50 individual parts with part numbers, quantities, descriptions, and additional comments. The parts are grouped into sections covering the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover.
Massey ferguson mf 560 combines parts catalogue manualfjjsekwsxkdmmem
The document contains parts lists and technical specifications for Massey Ferguson MF 560/565 combines. It lists over 50 individual parts with part numbers, quantities, descriptions, and additional technical details. The parts are grouped into sections covering the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover.
Massey ferguson mf 535 combines ( 1115201) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list and technical specifications for Massey Ferguson MF 530/535 combines. It includes over 30 pages detailing over 200 individual parts for the engine, cylinder block, crankshaft, cylinder head, cylinder head cover, and other systems. Each part is listed with its part number, quantity used, description, and any relevant comments.
Massey ferguson mf 530 s combine parts catalogue manualfjjsekwsxkdmmem
The document provides a list of parts for a Massey Ferguson MF 530 S combine harvester with part numbers and descriptions. It includes tables of contents for the engine and accessories, cylinder block, crankshaft, and cylinder head sections, listing the individual parts that make up each system along with references to other part numbers. The parts are identified numerically in exploded diagram views of each section.
Massey ferguson mf 530 combines ( 1115201) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list for Massey Ferguson MF 530/535 combines. It contains over 30 entries listing part numbers, quantities, descriptions, and comments for various engine, cylinder block, crankshaft, cylinder head, and cylinder head cover parts. Refence numbers and page numbers are provided at the bottom of each section for navigation.
Massey ferguson mf 510 combine, (fr) parts catalogue manualfjjsekwsxkdmmem
The document provides a parts list for a Massey Ferguson MF 510 combine harvester. It lists various parts needed for the combine's divider, pickup head, and related components. The parts are organized by item number, part number, quantity, description, and any relevant comments. Key parts listed include tubes, cones, plates, bolts, nuts, washers, bearings, discs, rollers, and reel tines for the divider and pickup head.
Massey ferguson mf 382 n tractor (japan only) parts catalogue manualfjjsekwsxkdmmem
This document provides parts information for a Massey Ferguson 382 N tractor intended for use only in Japan. It includes detailed lists and descriptions of engine parts such as the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each part is accompanied by its part number, quantity used, description, and any relevant comments. The document is intended as a reference for ordering replacement parts for the MF 382 N tractor sold only in the Japanese market.
Massey ferguson mf 285 s tractors (tr) parts catalogue manualfjjsekwsxkdmmem
This document provides part numbers and descriptions for engine installation and components for Massey Ferguson 265S and 285S tractors. It includes lists of parts for the engine, cylinder block, crankshaft, pistons, connecting rods and other engine components. Quantities, part numbers and additional identifying information like serial numbers are provided for each part.
Massey ferguson mf 265 s tractors (tr) parts catalogue manualfjjsekwsxkdmmem
This document provides part numbers and descriptions for engine installation and components for Massey Ferguson 265S and 285S tractors. It includes lists of parts for the engine, cylinder block, crankshaft, pistons, connecting rods and other engine components. Quantities, part numbers and additional identifying information like serial numbers are provided for each part.
Massey ferguson mf 254 tractor, 22210640 parts catalogue manualfjjsekwsxkdmmem
This document contains parts lists and technical specifications for components of a Massey Ferguson MF 254 tractor, including the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, and timing gear. It lists over 70 individual parts, providing part numbers, quantities, descriptions, and other identifying information for maintenance and repair of the engine and related systems.
Massey ferguson mf 245 tractor, (fr) parts catalogue manualfjjsekwsxkdmmem
This document provides a parts list for a Massey Ferguson MF 245 tractor. It contains 47 items describing parts like the engine, cylinder block, crankshaft, cylinder head, and timing gear. Each item lists the part number, quantity, description, and any comments. The parts list contains detailed technical specifications for replacement parts.
Komatsu 12 v140 1 series diesel engine service repair manualfjjsekwsxkdmmem
This document provides an overview of the contents and structure of a shop manual for diesel engines. It contains sections on general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, repair and replacement of parts. The manual is intended to help technicians perform repairs safely and effectively by explaining components, repair procedures, and inspection standards. Safety notices are included to prevent injury when working on equipment.
Komatsu 8 v170 1 series engine service repair manualfjjsekwsxkdmmem
This document is the introduction and table of contents for a shop manual for engine repair. It outlines safety precautions that should be followed when working on equipment. Some key points include: always wearing protective equipment like safety glasses and shoes, ensuring any lifted components are properly supported, following proper procedures for draining fluids to avoid spills, and making sure replacement parts meet specifications. The manual is divided into sections covering general information, component operation and function, testing and adjustment procedures, disassembly and assembly steps, and maintenance standards.
Kohler aegis 23 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, air/fuel systems, lubrication, cooling, electrical components, disassembly, inspection, reassembly, and specifications. It provides important safety warnings and recommendations for proper oil, coolant, and fuel types.
Kohler aegis 20 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, air/fuel systems, lubrication, cooling, electrical components, disassembly, inspection, reassembly, and specifications. Safety precautions are outlined, including warnings about rotating parts, hot parts, accidental starts, carbon monoxide, electrical shock, hot liquids, explosive gases, flammable fuels, and cleaning solvents. The document also provides information on engine identification numbers, oil recommendations, coolant recommendations, and fuel recommendations.
Kohler aegis 17 hp liquid cooled vertical crankshaft service repair manualfjjsekwsxkdmmem
This document is a service manual for Kohler AEGIS liquid-cooled vertical crankshaft engines with model numbers LV560, LV625, and LV675. The manual contains 11 sections covering safety, tools, troubleshooting, various engine systems, disassembly, inspection, and reassembly. It provides important safety information and recommendations for oil, coolant, and fuel used in the engines.
This document is an operator handbook for a JCB 1CX backhoe loader from serial numbers 751600 to 752999 and 806000 onwards. It contains safety notices and warnings about operating the machine safely. The contents section lists topics covered in the handbook such as identifying the machine, operation instructions, maintenance requirements, and lubricant safety information. Safety is the top priority when using the machine.
Hyundai hlf202530(c) 5 forklift truck service repair manualfjjsekwsxkdmmem
This document provides instructions for disassembly and assembly of a steering unit. The key steps are:
1. Disassemble the steering unit by removing the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, bearing races, cross pin, and seals.
2. Assemble the spool and sleeve with neutral position springs aligned correctly. Install the bearing races, cross pin, O-rings and lip seal using assembly tools.
3. Reassemble the remaining parts like the distributor plate, cardan shaft, gearwheel set and end cover. Proper alignment of parts is important for correct assembly.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
2. GROUP
INDEX
1 Specifications
2 Sectional View of Machine
3 Drive Schematic
4 Cutterbar
5 Threshing Mechanism
6 Elevators and Crop Delivery
7 Engine and Drives
8 Transmission and Chassis
9 Hydraulic System
10 Steering and Rear Axle
11 Electrical System
12 Auxiliary Equipment
Special Notes
4. DO 106 .... 56
1 SPECIFICATIONS DOMINATOR 106
Technical data 1. 1
Weights 1. 4
Dimensions 1. 5
Settings and capacities 1. 7
DOMINATOR 96
Technical data 1. 9
Weights 1.12
Dimensions 1.13
Settings and capacities 1.15
DOMINATOR 86
Technical data 1.17
Weights 1.20
Dimensions 1.21
Settings and capacities 1.23
DOMINATOR 76
Technical data 1.25
Weights 1.28
Dimensions 1.29
Settings and capacities 1.31
DOMINATOR 66
Technical data 1.33
Weights 1.36
Dimensions 1.37
Settings and capacities 1.39
DOMINATOR 56
Technical data 1.41
Weights 1.44
Dimensions 1.45
Settings and capacities 1.47
5. SPECIFICATIONS DOMINATOR 106
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and rejects all responsibility in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
Cutterbar
Cutting widths
Height adjustment
Cutting height range
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
Threshing mechanism clutch
DO 106 . .,. ,.56
To be sure, always compare settings and filling'
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m
(13ft) (15ft) t17ft) (19ft) (22ft) (25ft)
hydraulic
from 360 mm (14 1/4 in) below ground level
to 1300 mm (51 1/4 in) above ground level.
with floatation springs in use 950 mm (37 112 in)
with floatation springs blocked 1100 mm (43 1/2 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
hydraulic
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1580 mm (621/4 in), 12 bars
disawning plates underneath the concave, two and three
disawning plates can be engaged separately
width 1580 mm (62 1/4 in)
diameter 450 mm (17 3/4 in)
six rasp bars, seven drum discs
speed infinitely variable from 650 to 1500 1/min (rpm)
Optional:
a) step pulley drive - 750, 1000, 1200, 1500 1Imin (rpm)
b) slow-speed threshing drum drive kit (chain drive)
from 290 to 680 1/min (rpm)
hydraulic
1.1
6. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshaft
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
Engines
Cubic capacity
Max. speed l/min (rpm)
Idle speed 1/min (rpm)
kW (DIN H.P.)
Cooling
Fuel tank capacity
Battery
1.2
step type walkers and intensive separation system
(crankshaft with tines)
six
two
220_5 1/min (rpm)
two
six
7.00 m2
(10 850 sq in)
7.95m2
(12322sqin)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
5.10 m2
(7905 sq in)
6500 litres (178.75 U.K. bushels; 184.6 U.S. bushels)
hydraulically operated position control
Mercedes DM 401.901
10455 cm3
(638 in3
)
2390
1150
151 (205)
water
300 litres (66 Imp. gal, 79 U.S. gaU
12 Volt, 143 Ah
7. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
Ground drive
Transmission
Ground speeds in kilometers per hour
Forward travel
Reverse travel
Ground speeds in miles per hour
Forward travel
Reverse travel
Traction Wheel Drive
Steering
hydrostatic, controlled by lever on operator's platform
three gear ranges in either forward or reverse
1. and 2. gear range for field operations
3. gear range for road travel
on 23.1-26 R1 / 18.4-34 R1 tyres
1. from 0 to 6.1 km/h (from 0 to 7.7 km/h)
2. from 0 to 8.9 km/h (from 0 to 11.1 km/h)
3. from 0 to 20.0 km/h (from 0 to 25.5 km/h)
1. from 0 to 4.6 km/h (from 0 to 5.8 km/h)
2. from 0 to 6.6 km/h (from 0 to 8.8 km/h)
3. from 0 to 15.3 km/h (from 0 to 19.0 km/h)
on 23.1-26 R1 / 18.4-34 R1 tyres
1. from 0 to 3.8 mph (from 0 to 4.8 mph)
2. from 0 to 5.5 mph (from 0 to 6.9 mph)
3. from 0 to 12.4 mph (from 0 to 15.8 mph)
1. from 0 to 2.9 mph (from 0 to 3.6 mph)
2. from 0 to 4.1 mph (from 0 to 5.5 mph)
3. from 0 to 9.5 mph (from 0 to 11.8 mph)
Figures in brackets are only applicable for certain countries.
In countries with a speed limit of 20 km/h (12.4 mph) for
self-propelled machinery of husbandry, the hydrostatic drive
system incorporates a device that limits the ground speed
accordingly.
via final drive gears in oil bath
hydrostatic
Brakes
Tyres and Tyre Pressures
Foot brake
Hand brake
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brakes
maximum minimum tyre pressure
tyre size tyre maize picker head grain cutterbar
pressure six-row five-row 7.50 m 6.60 m 5.70 m 5.10 m 4.50m 3.90m
four-row (25 ft) (22 ft) (19 ft) (17 ft) (15 ft) (13 ft)
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-3414PR 3.3 (48) - 3.2 (46) 3.2 (46) 3.0 (43) 2.8 (41)
23.1-26 14 PR 2.5 (36) 2.5 (36) 2.3 (33) 2.3 (33) 2.1 (30) 1.9 (27)
28.1-26 12 PR 1.8 (26) 1.8 (26) 1.7 (25) 1.7 (25) 1.6 (23) 1.5 (22)
30.5-32 12 PR 1.5 (22) 1.2 (17) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16)
14.5/75-20 8 PR - 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43)
Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to
obtain the longest possible service life of the tyre.
Torque Settings of Wheel
Bolts and Wheel Nuts
Front wheels wheel nuts with thrust piece H 22
DIN 74361-10 =860 Nm (622 ft Ib)
Rear wheels wheel bolts M 18 x 1.5 =325 Nm (235 ft Ib)
1.3
8. DO 106 .... 56
SPECIFICATIONS DOMINATOR 106
Weights
Combine equipped with 18.4-34 Rl and 14.5/75-20
tyres, empty fuel tank and six cylinder engine:
Determine the total weight of the machine by adding
the weight of the equipment used on the combine to
the weight of the basic machine.
Basic machine (without cutterbar)
With cutterbar and spring tine reel
3.90 m (13 ft)
4.50 m (15 ft)
5.10 m (17 ft)
5.70 m (19 ft)
With bat-type reel
6.60 m (22 ft)
7.50 m (25 ft)
Two cpl. divider assemblies
With straw chopper
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel weights (one set)
With liquid ballast (magnesium chloride solution) filled into tyres
With extra weights in compliance with road regulations (not for all countries)
Combine Dimensions
9060 kg (19974 Ib)
add 960 kg ( 2116 Ib)
add 1040 kg ( 2292 Ib)
add 1120 kg ( 2469 Ib)
add 1200 kg ( 2446 Ib)
add 1320 kg ( 2910 Ib)
add 1440 kg ( 3175 Ib)
add 50 kg ( 110 Ib)
add 284 kg ( 626 Ib)
add 1260 kg ( 2778 Ib)
add 1510 kg ( 3329 Ib)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 2291b)
add 254 kg ( 560 Ib)
add 300 kg ( 661 Ib)
Turning Diameter, conforming to DIN 70020 Specifications
Wheel Thread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 18.4-34 tyres
on 23.1-26 14 PR tyres and
DW 20-26 wheels
on 28.1-26 tyres
adjustable axle
on 18.4-34 tyres
on 23.1-26 14 PR tyres and
DW 20-26 wheels
on 28.1-26 tyres
2510 mm (98 3/4 in)
2550 mm (100 1/2 in)
2780 mm (109 1/2 in)
2300 mm (90 1/2 in)
2980 mm (117 1/4 in)
3140 mm (123 1/2 in)
3500 mm (137 3/4 in)
3650 mm (143 3/4 in)
420 mm (16 1/2 in)
16800 mm (661 1/2 in)
1.4
9. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
~-----------L------------.....&
Operatjng Position
3760 mm (148 in)
add 415 mm ( 16 3/8 in)
3720 mm (146 1/2 in)
WIDTH B
HEIGHT H
Cutting width 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50"m
(13 ft) (15ft) (17ft) (19 ft) (22ft) ("25ft)
Overall width 5565 mm 6175 mm 6785 mm 7395 mm 8310 mm 9225 mm
(219 in) (243 in) (267 1/4) (291 1/4) (327 1/4) (363 1/4 in)
Overall widths are with deflectors set out on each side by
600 mm (23 3/4 in).
With four-row (3 m) maize picker head 3260 mm (128 1/4 in)
With five-row maize picker head 4060 mm (159 3/4 in)
With six-row maize picker head 5200 mm (204 3/4 in)
To top of grain tank
When grain tank lid is open
To top of cab
To bottom edge of grain tank
unloading tube 4020 mm (158 1/4 in)
On 23.1-26 or 28.1-26 tyres the height dimensions are being
reduced by approx. 40 mm (1 1/2 in).
LENGTH L Without dividers
With hoop dividers
With long dividers
With short dividers
Witz maize picker head
, With straw hood back panel
adjusted to rearward position
With straw spreader
9190 mm (361 3/4 in)
9550 mm (376 in)
10540 mm (415 in)
10290 mm (405 in)
10220 mm (402 1/4"in)
add 300 mm ( 11 3/4 in)
add 500 mm ( 19 3/4 in)
1.5
10. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
.......-----------L--------------..
Transport Position
WIDTH B
HEIGHT H
Cutting width 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m
(13ft) (15ft) (17ft) (19 ft) (22ft) (25ft)
Overall width 4365 mm 4975 mm 5585 mm 6195 mm 7110 mm 8025 mm
(171 3/4) (1953/4) (220 in) (244 in) (280 in) (315 in)
With cutterb6r detached 3000 mm (118 in)
With four-row (3 m) maize picker head 3000 mm (118 in)
With five-row maize pic.ker head 3800 mm (149 1/2 in)
With six-row maize picker head 4940 mm (194 1/2 in)
Ta top of grain tank 3760 mm (148 in)
Ta top of cab 3720 mm (146 1/2 in)
On 23.1-26 or 28.1-26 tyres the height dimensions are being
reduced by approx. 40 mm (1 1/2 in).
LENGTH L
1.6
With cutterbar detached
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
7770 mm (306 in)
9290 mm (365 3/4 in)
9650 mm (380 in)
10640 mm (419 in)
10390 mm (409 in)
10320 mm (406 in)
11. SPECIFICATIONS DOMINATOR 106
SETTINGS AND CAPACITIES
Hydraulic Oil Pressures
Lift hydraulic system
pressure relief valve
Hydrostatic steering system
pressure relief valve
Hydrostatic ground drive:
(LINDE hydrostatic pump BPV 100 S)
Charge pressure
Operating pressure
(SAUER hydrostatic pump SPV 23)
Charge pressure
Operating pressure
Oil Capacities
Transmission gearbox
Final drive gearboxes
Lift hydraulic system
LINDE hydrostatic
ground drive system
SAUER hydrostatic ground
drive system
Engines
Slip clutches
Reel
Main table auger
Upper feed rake shaft
Returns elevator
180 bar (2610 psi)
90+5 bar (1305+72.5 psi)
16 bar ( 232 psi)
420 bar (6091 psi)
14 bar ( 203 psi)
420 bar (6091 psi)
5 litres (4.4 Imp. qt; 5.28 U.S. qt) SAE 90
(M IL-L-21 05 B) API-G L-5-90
Hypoid Transmission Oil
4 litres each (3.5 Imp. qt; 4.2 U.S. qt) SAE 90
(M IL-L-21 05 B) API-G L-5-90
Hypoid Transmission Oil
approx.7 litres (6.2 Imp.qt; 7.4 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DI N 51524) ISO-VG 68 Specifications
approx. 8 litres (7 Imp. qt; 8.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DI N 51524) ISO-VG 68 Specifications
consult engine instruction book and combine
operator's manual
200 Nm (145 ft Ib)
200 Nm (145 ft Ib)
220 Nm (159 ft Ib)
adjust ratchet clutch so that no play exists
DO 106 .... 56
1.7
12. DO 106 .... 56
SPECIFICATIONS DOMINATOR 106
Shear Bolt
Grain tank unloading system
Knife Register
Reel
Basic setting
Main table auger
Basic setting
Concave
Control (initial) setting
M 10 x 45 DIN 931-8.8
the center of the knife sections should line up with the center
of the cutterbar fingers at each end of the knife stroke
reel drive shaft placed vertically over the knife. The tines
should be adjusted to vertical position.
approx. 15 mm (19/32 in) clearance between auger flights
and bottom of cutterbar
concave entrance: 13 mm (1/2 in)
clearance measured at third concave bar
concave exit:
concave main
adjusting lever:
concave rear
adjusting lever:
3 mm (1/8 in)
clearance measured at third last concave
bar
locked in 3rd hole of quadrant
locked in 1st hole of quadrant
(e = narrow)
Brakes
Steering
1.8
Foot brake
Hand brake
brake must grip when the pedal is depressed through one
third of its total travel
brake should be effective with the..hand-l-e·locked in the first
three to four teeth in the segment
with the steering cylinder piston rod fully extended, the
adjustable stop bolts must be contacting the steering arms
13. DO 106 .... 56
SPECIFICATIONS DOMINATOR 96
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and rejects all responsibility in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
To be sure, always compare settings and filling
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
5.70 m
(19 ft)
5.10 m
(17 ft)
4.50 m
(15 ft)
3-.90 m
(13 ft)
3.60 m
(12 ft)
hydraulic
from 360 mm (14 114 in) below ground level
to 1300 mm (51 114 in) above ground level
with floatation springs in use 925 mm (36 112 in)
with floatation springs blocked 1075 mm (42 114 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
belt-operated
Height adjustment
Cutting height range
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Cutterbar
Cutting widths
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1320 mm (52 in), 12 bar
disawning plates underneath the concave, two and
three disawning plates can be engaged separately
width 1320 mm (52 in)
diameter 450 mm (17 3/4 in)
six rasp bars, six drum discs
speed infinitely variable from 650 to 1500 1Imin (rpm)
Threshing mechanism clutch
Optional:
a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm)
a1) additional speed 650 1/min (rpm)
b) slow speed threshing drum drive kit, 3-speed chain
drive: 300, 430 and 550 1/min (rpm)
belt-operated
1.9
14. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshaft
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
Engine
Cubic capacity
Max. speed 1Imin (rpm)
Idle speed 1Imin (rpm)
kW (DIN H.P.)
Cooling
Fuel tank capacity
Battery
Ground Drive
a) Mechanical
Clutch
Transmission
Speed range
1.10
step type walkers and intensive separation system
(crankshaft with tines)
five
two
220_5 1/min (rpm)
two
five
5.80 m2
(8990 sq in)
6.60 m2
(10230 sq in)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
4.25 m2
(6588 sq in)
5200 litres (143 Imp. bushels, 147.7 U.S. bushels)
hydraulically operated position control
Mercedes OM 352 A
5675 cm3 (346 in3 )
2600
1150
110 (150)
water
300 litres (66 Imp. gal, 79 U.S. gal)
12 Volt, 110 Ah
variable ground speed, hydraulically controlled
dry single disc clutch
three forward, one reverse gear
on 23.1-26 R 1 tyres
1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph)
2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph)
3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph)
R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)
15. DO 106 .... 56
SPECIFICATIONS DOMINATOR 96
b) Hydrostatic
Transmission
Ground speeds in kilometers per hour
Forward travel
Reverse travel
Ground speeds in miles per hour
Forward travel
Reverse travel
Traction Wheel Drive
Steering
controlled by lever on operator's platform
three gear ranges in either forward or reverse
1. and 2. gear range for field operation
3. gear range for road travel
on 23.1-26 R1 tyres
1. from 0 to 5.4 km/h (from 0 to· 6.8 km/h)
2. from 0 to 9.9 km/h (from 0 to 12.6 km/h)
3. from 0 to 19.9 km/h (from 0 to 25.3 km/h)
1. from 0 to 4.0 km/h (from 0 to 4.9 km/h)
2. from 0 to 7.4 km/h (from 0 to 8.9 km/h)
3. from 0 to 15.0 km/h (from 0 to 18.0 km/h)
on 23.1-26 R1
1. from 0 to 3.4 mph (from 0 to 4.2 mph)
2. from 0 to 6.2 mph (from 0 to 7.8 mph)
3. from 0 to 12.4 mph (from 0 to 15.7 mph)
1. from 0 to 2.5 mph (from 0 to 3.0 mph)
2. from 0 to 4.6 mph (from 0 to 5.5 mph)
3. from 0 to 11.2 mph (from 0 to 11.2 mph)
Figures in brackets are only applicable for certain countries.
In countries with a speed limit of 20 km/h (12.4 mph) for
self-propelled machinery of husbandry, the hydrostatic drive
system incorporates a device that limits the ground speed
accordingly.
via final drive gears in oil bath
hydrostatic
Brakes
Tyres and Tyre Pressures
Foot brakes
Hand brake
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brake
maximum minimum tyre pressure
tyre maize picker head grain cutterbar
tyre sizes pressure six-row five-row 5.70 m 5.10 m 4.50m 3.90m 3.60 m
four-row (19 ft) (17 ft) (15 ft) (13 ft) (12 ft)
and up
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-34 14 PR 3.3 (48) 3.1 (45) 3.0 (43) 3.0 (43) 2.8 (41) 2.6 (38)
23.1-2612PR 2.1 (30) 2.1 (30) 2.0 (29) 2.0 (29) 1.9 (27) 1.7 (25)
23.1-26 14 PR 2.5 (36) 2.1 (30) 2.0 (29) 2.0 (29) 1.9 (27) 1.7 (25)
28.1-26 12 PR 1.8 (26) 1.6 (23) 1.6 (23) 1.6 (23) 1.5 (22) 1.4 (20)
30.5-3210PR 1.5 (22) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16)
12.5/80-18 6 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
12.5/80-18 10 PR - 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43)
14.5/75-20 8 PR - 2.4 (35) 2.4 (35) 2.4 (35) 2.4 (35) 2.4 (35)
Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to
obtain the longest possible service life of the tyre.
Torque Settings of Wheel
Nuts and Wheel Bolts
Front wheels wheel nuts with thrust piece H 22
DIN 74361-10 = 520 Nm (376 ft Ib)
Rear wheels wheel bolts M 18 x 1.5 =325 Nm (235 ft Ib)
1.11
16. DO 106 .... 56
'SPECIFICATIONS DOMINATOR 96
Weights
Combine equipped with 23.1-26 R1 and 12.5/80-18
15 tyres, empty fuel tank and six cylinder engine:
Determine the total weight of the machine·by adding
the weight of the equipment used on the combine to
the weight of the basic machine.
Basic machine (without cutterbar)
With cutterbar and spring tine reel
3.60 m (12 ft)
3.90 m (13 ft)
4.50 m (15 ft)
5.10 m (17 ft)
5.70 m (19 ft)
Two cpl. divider assemblies
With straw chopper
With cab and ventilating system
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel weights (one set)
With liquid ballast (magnesium chloride solution) filled into tyres
With extra weights in compliance with road regulations
(not for all countries)
Combine Dimensions
7432 kg (16385 Ib)
add 920 kg ( 20281b)
add 960 kg ( 2116 Ib)
add 1040 kg ( 22931b)
add 1120 kg ( 2469 Ib)
add 1200 kg ( 2646 Ib)
add 50 kg ( 11 0 Ib)
add 264 kg ( 582 Ib)
add 260 kg ( 573 Ib)
add 1260 kg ( 2778 Ib)
add 1510 kg ( 3329 Ib)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 229 Ib)
add 210 kg ( 4631b)
add 300 kg ( 661 Ib)
Turning Diameter, conforming to DIN 70020 Specifications
Wheel Tread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 23.1-26 12 PR tyres
and DW 16-26 wheels
on 23.1-26 14 PR tyres
and DW 20-26 wheels
on 18.4-34 tyres
on 28.1-26 tyres
wide axle
adjustäble axle
on 23.1-26 12 PR tyres
and DW 16-26 wheels
on 23.1-26 14 PR tyres
and DW 20-26 wheels
on 18.4-34 tyres
on 28.1-26 tyres
2450 mm (96 1/2 in)
2550 mm (100 1/2 in)
2510 mm (98 3/4 in)
2780 mm (109 1/2 in)
2050 mm (80 3/4 in)
2300 mm (90 1/2 in)
2500 mm (98 1/2 in)
2700 mm (106 1/4 in)
3000 mm (118 in)
3140 mm (123 1/2 in)
2980 mm (117 1/4 in)
3500 mm (137 3/4 in)
3650 mm (143 3/4 in)
420 mm (16 1/2 in)
16800 mm (661 1/2 in)
1.12
17. Da 106 .... 56
SPECIFICATIONS DOMINATOR 96
.......-----------L--------------..
Operating Position
WIDTH B Cutting width 3.60 m 3.90 m 4.50 m 5.10 m 5.70 m
(12ft) (13ft) (15ft) (17ft) (19ft)
Overall width 5190 mm 5565 mm 6175 mm 6785 mm 7395 mm
(204 1/4 in) (219 in) (243 in) (267 1/4 in) (291 1/4 in)
Overall widths are with deflectors set out on each side by
600 mm (23 3/4 in).
With four-row (3 m) maize picker head 3260 mm (128 1/4 in)
With five-row maize oicker head 4060 mm (159 3/4 in)
With six-row maize picker head 5200 mm (204 3/4 in)
HEIGHT H
LENGTH L
Ta top of grain tank
When grain tank lid is open
To top of cab
To bottom edge of gran tank
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
With straw hood back panel
adjusted to rearward position
With straw spreader
3720 mm (146 1/2 in)
add 415 mm ( 16 11/32 in)
3680 mm (144 3{4 in)
3530 mm (139 in)
9190 mm (361 3/4 in)
9550 mm (376 in)
10540 mm (415 in)
10290 mm (405 in)
10220 mm (402 1/4 in)
add 300 mm (11 3/4 in)
add 500 mm (19 3/4 in)
1.13
18. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
...---- B------.e
Transport Position
......- - - - - - - - - - - L---------------l..
WIDTH B Cutting width 3.60 m 3.90 m 4.50 m 5.10 m 5.70 m
(12ft) (13 ft) (15ft) (17ft) (19 ft)
Overall width 3990 mm 4365 mm 4975 mm 5585 mm 6195 mm
(157 in) (171 3/4) '( 195 3/4) (220 in) (244 in)
With cutterbar detached 3000 mm (118 in)
With four-row (3 m) maize picker head 3000 mm (118 in)
With five-row maize picker head 3800 mm (149 1/4 in)
With six-row maize picker head 4940 mm (194 1/2 in)
HEIGHT L
LENGTH L
1.14
To top of grain tank
To top of cab
With cutterbar detached
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
3720 mm (146 1/2 in)
3680 mm (144 3/4 in)
7770 mm (306 in)
9290 mm (365 3/4 in)
9650 mm (380 in)
10640 mm (419 in)
10390 mm (409 in)
10320 mm (406 1/4 in)
19. SPECIFICATIONS DOMINATOR 96
SETTINGS AND CAPACITIES
Hydraulic Oil Pressures
Lift hydraulic system
pressure relief valve
Hydrostatic steering system
pressure relief valve
Hydrostatic ground drive:
(LINDE hydrostatic pump BPV 70 S)
Charge pressure
Operating pressure
(SAUER hydrostatic pump SPV 22)
Charge pressure
Operating pressure
Oil capacities
Transmission gearbox
Final drive gearboxes
Lift hydraulic system
LI NDE hydrostatic
ground drive system
SAUER hydrostatic
ground drive system
Engines
Slip clutches
Reel
Main table auger
Upper feed rake shaft
Returns elevator
180 bar (2610 psi)
90+5 bar (1305+72.5 psi)
16 bar ( 232 psi)
420 bar (6091 psi)
14 bar ( 203 psi)
420 bar (6091 psi)
• 6 litres (5.3 Imp. qt; 6.3 U.S. qt) SAE 90
(M IL-L-21 05) API-G L-4-90
Transmission Oil
3 litres each (2.6 Imp. qt; 3.2 U.S. qt) SAE 90
(MIL-L-2105) API-GL-4-90
Transmission Oil
approx.6 litres (5.3 Imp. qt, 6.3 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 8 litres (7 Imp. qt; 8.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
consult engine instruction book and combine
operator's manual
200 Nm (145 ft Ib)
200 Nm (145 ft Ib)
220 Nm (159 ft Ib)
adjust ratchet clutch so that no play exists
DO 106 .... 56
1.15
20. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
Shear Bolt
Grain tank unloading system
Knife Register
Reel
Basic setting
Main table auger
Basic setting
Concave
Control (initial) setting
M 10 x 45 DIN 931-8.8
the center of the knife sections should line up with the center
of the cutterbar fingers at each end of the knife stroke
reel drive shaft placed vertically over the knife. The tines
should be adjusted to vertical position.
approx. 15 mm (19/32 in) clearance between auger flights
and bottom of cutterbar
concave entrance: 13 mm (1/2 in)
clearance measured at third concave bar
concave exit:
concave main
adjusting lever:
concave rear
adjusting lever:
3 mm (1/8 in)
clearance measured at third last concave
bar
locked in 3rd hole of quadrant
locked in 1st hole of quadrant
(e =narrow)
Brakes
Steering
1.16
Foot brake
Hand brake
brake must grip when the pedal is depressed through one third
of its total travel
brake should be effective with the handle locked in the first
three to four teeth in the segment.
with the steering cylinder piston rod fully extended, the
adjustable stop bolts must be contacting the steering arms
21. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
TechniCaI data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and ejects all responsibilit'! in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
To be sure, always compare settings and filling
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
5.70 m
(19 ft)
5.10 m
(17 ft)
4.50m
(15 ft)
3.90 m
(13 ft)
3.60 m
(12 ft)
hydraulic
from 360 mm (14 1/4 in) below ground level
to 1300 mm (51 114 in) above ground level
with floatation springs in use 900 mm (35 1/2 in)
with floatation springs blocked 1040 mm (41 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
belt-operated
Height adjustment
Cutting height range
Cutterbar
Cutting widths
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1320 mm (52 in), 12 bar
disawning plates underneath the concave, two and
three disawning plates can be engaged separately
width 1320 mm (52 in)
diameter 450 mm (17 3/4 in)
six rasp bars, six drum discs
speed infinitely variable from 650 to 1500 1/min (rpm)
Threshing mechanism clutch
Optional:
a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm)
a1) additional speed 650 1/min (rpm)
b) slow speed threshing drum drive kit, 3-speed chain
drive: 300, 430 and 550 1/min (rpm)
belt-operated
1.17
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. 00 106 .... 56
SPECIFICATIONS DOMINATOR 86
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshafts
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
step typ walkers and intensive separation system
(crankshaft with tines)
five
two
220_5 1/min (rpm)
two
five
5.15 m2
(7982.5 sq in)
5.95 m2 (9222.5 sq in)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
4.25 m2
(6588 sq in)
4600 Iitres (126.5 Imp. bushels; 130.6 U.S. bushels)
hydraulically operated position control
Engines
Cubic capacity
Max. speed 1Imin (rpm)
Idle speed 1/min (rpm)
kW (DIN H.P.)
Cooling
Mercedes OM 352
5675 cm3 (346 in3 )
2600
1150
88 (120)
water
Perkins 6.3724
6100 cm3
(372 in3
)
2600
1150
88 (120)
water
Fuel tank capacity
Battery
1.18
300 Iitres (66 Imp. gal; 79 U.S. gal)
12 Volt, 110 Ah
24. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
Ground Drive
a) Mechanical
Clutch
Transmission
Speed range
Traction Wheel Drive
Steering
Brakes
Tyres and Tyre Pressures
Foot brake
Hand brake
variable ground speed, hydraulically controlled
dry single disc clutch
three forward, one reverse gear
on, 18.4-30 R1 /.23.1-26 R1 tyres
1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph)
2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph)
3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph)
R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)
via final drive gears in oil bath
hydrostatic
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brake
maximum minimum tyre pressure
tyre size tyre maize picker head grain cutterbar
pressure six-row five-row 5.70 m 5.10 m 4.50m 3.90 m 3.60 m
four-row (19 ft) (17 ft) (15 ft) (13 ft) (12 ft)
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-30 12 PR 2.9 (42) - - - - 2.9 (42)
18.4~34 12 PR 2.9 (42) - 2.9 (42) 2.9 (42) 2.5 (36) 2.4 (35)
23.1-26 12 PR 2.1 (30) 2.0 (29) 1.9 (27) 1.9 (27) 1.7 (25) 1.6 (23)
28.1-26 12 PR 1.8 (26) 1.5 (22) 1.5 (22) 1.5 (22) 1.1 (16) 1.1 (16)
12.5/80-18 6 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
12.5/80-18 10 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
14.5/75-20 8 PR - 2.0 (29) 2.0 (29) 2.0 (29) 2.0 (29) 2.0 (29)
Where ground conditions allow maximum tyre_pressure, the maximLam tyre pressure should be maintained in order to
obtain the longest possible service of the tyre.
Torque Settings of Wheel
Bolts and Wheel Nuts
Front wheels with flange nuts M22 x 1.5
and special washer (Limes) C 22.5 DIN 74361
= 520 Nm (376 ft lb)
Rear wheels M 18 x 1.5 wheel bolts = 325 Nm (235 ft lb)
1.19
25. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
Weights
Combine equipped with 18.4-30 R1 and 12.5/80-18
Impl. tyres, empty fuel tank, six cylinder engine.
Determine the total weight of the machine by adding
the weight of the equipment used on the combine
to the weight of th"e basic machine.
Basic machine (without cutterbar)
With long lip cutterbar and spring tine reel
3.60 m (12 ft)
3.90 m (13 ft)
4.50 m (15 ft)
5.10m(17ft)
5.70 m (19 ft)
Two cpl. divider assemblies
With straw chopper
With cab and ventilating system
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel vveights (one set)
With liquid ballast (magnesium chloride solution) filled into
12.5/80-18 rear tyres
With extra weights in compliance with road regulations
(not for all countries)
Combine Dimensions
7170 kg (15807 Ib)
add 920 kg ( 20281b)
add 960 kg ( 2116 Ib)
add 1040 kg ( 2293 Ib)
add 1120 kg ( 24691b)
add 1200 kg ( 2646 Ib)
add 50 kg ( 110 Ib)
add 264 kg ( 5821b)
add 260 kg ( 5731b)
add 1260 kg ( 27781b)
add 1510 kg ( 33291b)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 2291b)
add 210 kg ( 4631b)
add 300 kg ( 661 Ib)
Wheel Tread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 18.4-30 tyres
on 23.1-26 tyres
on 18.4-34 tyres
wide rear axle
adjustable rear axle
on 18.4-30 tyres
on 23.1-26 tyres
on 18.4-34 tyres
2522 mm (99 1/4 in)
2450 mm (96 1/2 in)
2510 mm (99 in)
2050 mm (80 3/4 in)
2300 mm (90 1/2 in)
2500 mm (98 1/2 in)
2700 mm (106 1/4 in)
2967 mm (116 3/4 in)
2985 mm (117 1/2 in)
2975 mm (117 in)
3650 mm (143 3/4 in)
380 mm (15 in)
Turning Diameter, conforming to DIN 70020 Specifications
1.20
15900 mm (626 in)