Chen Jia Resume Final
•
1 like•113 views
Chen Jia is an electrical engineer with experience in hardware design, communication systems, and data analysis. As a graduate research assistant at Kansas State University, she improved the accuracy of muscle fatigue detection from 70% to over 98% and redesigned course modules to increase student comprehension and test scores. She also created a system to measure soybean protein properties and simulated valve models. Jia holds a PhD in Electrical Engineering from Kansas State University and a BS in Electrical Engineering from BeiHang University, China.
Report
Share
Report
Share
Download to read offline
Recommended
akshay resume
Akshay Mohan is an RF design engineer currently working at Amazon Lab126. He has a MS in Electrical Engineering from University of Texas at Dallas and a BE in Electronics and Communication from Visvesvaraya Technological University, RIT, Bangalore. His experience includes internships at Amazon Lab126 and Apple where he worked on RF subsystem design, testing, and characterization for products including the Fire Phone, Fire TV, e-readers and Amazon Echo. He has strong skills in RF simulations, PCB design, and FCC/CTIA compliance testing.
Girish_Resume_RF
This document provides a resume for Girish Kumar Puttaraju seeking a full-time position in communication/RF engineering. It outlines his academic qualifications including a Master's degree in Electrical Engineering from UT Dallas and Bachelor's degree in Electronics and Communication from India. It also details his technical skills in tools, programming languages, and hardware. His work experience includes an internship at Intel testing LTE firmware. Academic projects covered RF and microwave design, LTE simulation, power amplifier design, antenna design, and more.
Austin Cousineau - Resume - December 2016
This document is a resume for Austin Cousineau, an electrical engineer with experience in hardware design, laboratory skills, and software proficiency. He received his Bachelor of Applied Science in Electrical Engineering from the University of Waterloo. His relevant work experience includes multiple co-op positions at Facebook, Apple, and Thalmic Labs focusing on storage systems engineering, iPhone hardware testing, and electrical engineering. He has also received several awards for his capstone project developing integrated sensors for agricultural monitoring.
Cover_Letter
Girish Kumar Puttaraju is applying for a full-time position in RF and communications. He recently graduated with a Master's degree in Electrical Engineering from The University of Texas at Dallas with a GPA of 3.7. His coursework focused on communication and RF topics. He has experience with tools like MATLAB, HFSS, FEKO, and design languages. He is confident that his academic knowledge and project experience designing components like amplifiers and antennas would be an asset for the position.
dale_mcclure_resume_V5
Dale T. McClure is an electrical engineer with over 6 years of experience designing, debugging, and optimizing RF and embedded systems. He has expertise in RF hardware design, project leadership, mixed-signal schematic design, and software development. His experience includes positions at HID Global, Backcountry Access, and Covidien EbD where he has led projects from conception to production and managed engineering teams.
Ramos, Everlino Jose
Everlino Jose A. Ramos is seeking a position in systems engineering and has over 6 years of experience working in communications engineering. He has a Master's degree in Electrical Engineering from Cal Poly Pomona with a focus on communication systems and digital signal processing. He has worked as a teaching associate and communications engineer and has skills in programming, operating systems, and engineering applications.
Resume I
This document is a resume for John M Garofalo, who recently graduated with a Bachelor's degree in Electrical Engineering and is now pursuing a Master's degree. He has extensive skills in programming languages like MATLAB, C++, and Python. He also has experience with electronics, electromagnetism, design software, and using principles of engineering to troubleshoot problems. His resume highlights coursework, projects, research, employment, and honors to demonstrate his qualifications.
Resume
John Mower has a Masters in Electrical Engineering from the University of Washington and is currently a Research Engineer at the Applied Physics Laboratory at UW. His experience includes designing, constructing, and testing 3 kW X-band radar systems as well as work with millimeter-wave remote sensing, antenna characterization, signal processing, and electromagnetic modeling up to 325 GHz. He has authored conference papers and presentations and has skills in areas like microwave engineering, remote sensing, control systems, signal processing, and programming.
Recommended
akshay resume
Akshay Mohan is an RF design engineer currently working at Amazon Lab126. He has a MS in Electrical Engineering from University of Texas at Dallas and a BE in Electronics and Communication from Visvesvaraya Technological University, RIT, Bangalore. His experience includes internships at Amazon Lab126 and Apple where he worked on RF subsystem design, testing, and characterization for products including the Fire Phone, Fire TV, e-readers and Amazon Echo. He has strong skills in RF simulations, PCB design, and FCC/CTIA compliance testing.
Girish_Resume_RF
This document provides a resume for Girish Kumar Puttaraju seeking a full-time position in communication/RF engineering. It outlines his academic qualifications including a Master's degree in Electrical Engineering from UT Dallas and Bachelor's degree in Electronics and Communication from India. It also details his technical skills in tools, programming languages, and hardware. His work experience includes an internship at Intel testing LTE firmware. Academic projects covered RF and microwave design, LTE simulation, power amplifier design, antenna design, and more.
Austin Cousineau - Resume - December 2016
This document is a resume for Austin Cousineau, an electrical engineer with experience in hardware design, laboratory skills, and software proficiency. He received his Bachelor of Applied Science in Electrical Engineering from the University of Waterloo. His relevant work experience includes multiple co-op positions at Facebook, Apple, and Thalmic Labs focusing on storage systems engineering, iPhone hardware testing, and electrical engineering. He has also received several awards for his capstone project developing integrated sensors for agricultural monitoring.
Cover_Letter
Girish Kumar Puttaraju is applying for a full-time position in RF and communications. He recently graduated with a Master's degree in Electrical Engineering from The University of Texas at Dallas with a GPA of 3.7. His coursework focused on communication and RF topics. He has experience with tools like MATLAB, HFSS, FEKO, and design languages. He is confident that his academic knowledge and project experience designing components like amplifiers and antennas would be an asset for the position.
dale_mcclure_resume_V5
Dale T. McClure is an electrical engineer with over 6 years of experience designing, debugging, and optimizing RF and embedded systems. He has expertise in RF hardware design, project leadership, mixed-signal schematic design, and software development. His experience includes positions at HID Global, Backcountry Access, and Covidien EbD where he has led projects from conception to production and managed engineering teams.
Ramos, Everlino Jose
Everlino Jose A. Ramos is seeking a position in systems engineering and has over 6 years of experience working in communications engineering. He has a Master's degree in Electrical Engineering from Cal Poly Pomona with a focus on communication systems and digital signal processing. He has worked as a teaching associate and communications engineer and has skills in programming, operating systems, and engineering applications.
Resume I
This document is a resume for John M Garofalo, who recently graduated with a Bachelor's degree in Electrical Engineering and is now pursuing a Master's degree. He has extensive skills in programming languages like MATLAB, C++, and Python. He also has experience with electronics, electromagnetism, design software, and using principles of engineering to troubleshoot problems. His resume highlights coursework, projects, research, employment, and honors to demonstrate his qualifications.
Resume
John Mower has a Masters in Electrical Engineering from the University of Washington and is currently a Research Engineer at the Applied Physics Laboratory at UW. His experience includes designing, constructing, and testing 3 kW X-band radar systems as well as work with millimeter-wave remote sensing, antenna characterization, signal processing, and electromagnetic modeling up to 325 GHz. He has authored conference papers and presentations and has skills in areas like microwave engineering, remote sensing, control systems, signal processing, and programming.
Java localization-based radio model calibration for fault-tolerant wireless ...
This paper proposes a localization-based method to calibrate radio propagation models by finding mobile station locations via localization and using radio signal strength measurements to adjust model parameters to better fit the real environment. This calibration method is integrated into a fault-tolerance framework to automatically detect environmental changes and propose network reconfigurations before service failures occur. An evaluation in a real industrial scenario demonstrated the practicality of the approach.
kiran_Basavaraju_LW
Kiran Basavaraju is seeking an opportunity in RF and wireless communication. He is currently pursuing a Master's degree in Electrical Engineering from the University of Texas at Dallas, expected to graduate in May 2015. He has relevant experience designing RF and microwave components such as amplifiers, filters, and antennas. He also has experience simulating wireless communication systems and analyzing link budgets and system performance.
resume
Manish Kumar Soni is seeking a position as a Design Engineer where he can apply his analytical skills in VLSI. He has a M.Tech in Microelectronics and VLSI Design from SGSITS Indore with a CGPA of 7.5. His skills include EDA tools like Cadence Virtuoso and expertise in analog circuit design, low power CMOS VLSI design, and digital signal processing. For his M.Tech final year project, he designed an instrumentation amplifier for biomedical applications. He is proficient in Linux and Windows platforms and has strong analytical abilities.
Holmstedt CV-2015
The document is a resume for Christian Holmstedt summarizing his experience and skills. It outlines his broad experience in radio astronomy systems and receivers, including analog and digital electronics design, electromechanical systems, automation, RF testing, vacuum technology, and clean room work. It also lists his technical skills and work history developing and testing cryogenically cooled low noise receivers for radio telescopes.
JuswantoWardojo
Juswanto Wardojo is an experienced electrical engineer with 22 years of experience developing RF, microwave, wireless, and fiber optic communication systems. He has expertise in C/C++, MATLAB, and CAD tools like ADS, Xilinx ISE, and PADS. Currently he works as a staff test engineer at Peregrine Semiconductor designing RF power amplifier production test platforms.
Energy consumption of wsn
This document discusses wireless sensor network applications and energy consumption. It provides examples of WSN applications including disaster relief, environment monitoring, healthcare, and more. It then discusses various factors that influence energy consumption in sensor nodes, including operation states, microcontroller usage, radio transceivers, memory, and the relationship between computation and communication. Specific power consumption numbers are given for different components like radios, sensors, and microprocessors. The goals of optimization for WSNs are discussed as quality of service, energy efficiency, scalability, and robustness.
Indian Space Research Organisation
The document provides information about various departments and research areas within the Department of Electrical Engineering at IIT Bombay that may be relevant for collaboration with ISRO. It discusses expertise in areas such as communications and signal processing, control and computing, microelectronics, power electronics, and VLSI design. Specific projects proposed for collaboration include work on antennas and microwaves, information networks, guidance and control systems, electronics, and power systems. Laboratories and facilities with relevant equipment for potential joint projects are also described.
Gopi tech-presentation
The document outlines the core team structure and general new project process of Laxmimayee Technologies Private Limited. It describes the roles of the Manager (Technical), Production Lead, Quality Lead, and Research, Application Development Lead, and Analysis Lead on the core team. It also lists several past experiences and case studies the company has completed, including projects involving paper charts, surveys, utilities like sewer and electrical systems, parcel mapping, data migration, thermal imaging, underground cables, and agriculture.
NegarSheiktaheri_Resume_2015
Negar Sheikhtaheri is seeking an electrical engineering position and has relevant experience from internships and education. She has a Master's degree in communication and signal processing from California State University, Fullerton and a Bachelor's degree in electrical engineering. Her internship experience includes testing roles at Broadcom Corp where she developed automated testing mechanisms and worked on RF calibration and testing of mobile devices and networking equipment.
Engineering Cross-Layer Fault Tolerance in Many-Core Systems
1) The document discusses engineering cross-layer fault tolerance in many-core systems. It proposes a cross-layer approach where fault tolerance is distributed across system layers rather than handled solely within a single layer.
2) A motivating example of cross-layer fault tolerance is discussed using TCP/IP, where errors can be detected and recovered across multiple layers for improved efficiency.
3) The challenges of ensuring cross-layer fault tolerance for many-core systems containing tens to thousands of cores are discussed to improve reliability, performance and energy efficiency.
4) The plan is to implement a case study of a car number plate recognition application to gain experience with cross-layer fault tolerance, and apply order graphs to model performance
Dotnet a data fusion technique for wireless ranging performance improvement
This paper analyzes the performance limitations of two wireless ranging techniques: received signal strength (RSS) and two-way time-of-flight (ToF) measurements. It then proposes a data fusion algorithm to combine the two techniques to improve ranging accuracy. The algorithm was implemented and tested on an embedded prototype using commercial off-the-shelf components. While not accurate enough for fine-grained indoor positioning, the results show the solution can reliably detect proximity and hazards indoors. Integrating ToF measurement directly into radio chips could further boost accuracy for applications like ambient assisted living.
BFunsten_Resume
Brad Funsten is an electrical engineering student at California Polytechnic State University expected to graduate in June 2015 with a B.S. and M.S. He has a 3.71 GPA and has made the Dean's List for 6 quarters. His coursework includes digital signal processing, analog/digital filter design, microcontroller programming, and more. He has experience programming in C, C++, and assembly and using test equipment, software tools like Cadence Virtuoso, and MATLAB. He has worked with Advanced Telesensors assisting with a radar filter design and is developing a radar monitor for the elderly as part of his thesis. He has also completed projects involving a ping pong ball launcher, luxmeter, computer
ahsan cv
M. Ahsan Azeem received a Bachelor of Electrical Engineering from the National University of Computer and Emerging Sciences in Islamabad, Pakistan. He completed projects in RF amplifier design, ladder logic implementation, ALU design on L-Edit, and microcontroller-based water level control. Ahsan also received a 4-year merit scholarship and interned at FESCO WAPDA, learning about grid station distribution panels and team management. His skills include RF circuit design using ADS, layout design on L-Edit and MicroWind, and C++ programming.
PhilipSamDavisResume
Philip "Sam" Davis is pursuing a PhD in electrical engineering from New Mexico State University with a focus on signal processing, embedded programming, and machine learning. He has extensive academic and research experience in these areas, including coursework, research projects analyzing EEG signals to predict human perceptions, and internships. His skills include signal processing, machine learning, embedded systems, and software/hardware design. He is currently finishing his dissertation and has published several papers in the field.
General Resume
Chad Stewart holds a Bachelor's degree in Aerospace Engineering and has experience as an Electronics Technician in the Navy where he held a secret security clearance. He has skills in Matlab, SolidWorks, ANSYS, STK, Python, and electronics test equipment. His experience includes projects involving satellite design, robotics programming, 3D printing, and lab work analyzing communication systems and transonic aerodynamic flows. He currently works as a Research Assistant designing sensors and was a Teaching Assistant for a Thermofluids course.
Resume Song Chen 2016
Song Chen has over 5 years of experience in electrical engineering and mechanical engineering. He has worked on developing inertial measurement units, fiber optic gyroscopes, and fiber optic current transducers. He is currently a PhD student researching flexible electronics fabrication and structural health monitoring applications. He has skills in C/C++, electrical design, PCB layout, and LabVIEW.
Summary
Stephen Wood has extensive experience in embedded software engineering, hardware engineering, and leading cross-functional teams. He has worked on several projects including developing a highly innovative medical laser system that was smaller and more powerful than competitors; designing a dual temperature sensor control algorithm for a precise CO2 incubator; and directing the development of next-generation packaging machinery. He also developed prototype testing systems and operating systems for various control applications using skills in software, electrical engineering, and mathematics.
Aplications for machine learning in IoT
Presented at the Intel Global IoT DevFest (Oct 2017)
- Real-world use cases: healthcare, building management, retail, smart cities, transportation
- Time-series analysis
- AI / ML overview & applications
Shilpi Sharma Resume
Shilpi Sharma is seeking a position as an RF and Microwave Design Engineer. She has a Master's degree in Electrical Engineering from UT Dallas with a 3.889 GPA and a Bachelor's degree in Electronics Engineering from Birla Institute of Technology with an 8.05/10 GPA. Her relevant coursework includes RF and Microwave Circuits, Systems Engineering, Amplifier Design, and Antenna Engineering. For course projects, she has designed and analyzed RF circuits and systems using software like AWR Microwave Office and HFSS and has experience measuring circuits using equipment like vector network analyzers. She has worked as an RF Antenna and System Research Assistant and had an internship at National Instruments in their A
BFunsten_Resume
Brad Funsten is an electrical engineering student at California Polytechnic State University expected to graduate in June 2015 with a B.S. and M.S. He has a 3.84 GPA and has made the Dean's List for 6 quarters. His coursework includes digital signal processing, analog/digital filter design, microcontroller programming, and more. He has experience with programming languages like C and C++, software like Cadence Virtuoso, and test equipment like oscilloscopes. For ongoing projects, he is characterizing electrocardiography signals using neural networks and developing a radar monitor for the elderly.
M.sc. m kamel
M.sc. Mahmoud Kamel, Developing a DSP Core using an FPGA Prototype for Scintillation Detector Signals, supervised by Dr. Ashraf Aboshosha, ICGST
SteveBrassResume_LinkedIn
Stephen C. Brass has extensive experience in medical device design and development, digital signal processing, hardware design, and software development. He has designed several medical products in compliance with relevant safety and regulatory standards. Additionally, he has experience managing all stages of product development from concept to completion. Brass holds an MS in Technical Management from Johns Hopkins University and a BSEE from Robert Gordon's Institute of Technology. He currently works as an independent consultant providing design services for various industrial, scientific, and medical clients.
More Related Content
What's hot
Java localization-based radio model calibration for fault-tolerant wireless ...
This paper proposes a localization-based method to calibrate radio propagation models by finding mobile station locations via localization and using radio signal strength measurements to adjust model parameters to better fit the real environment. This calibration method is integrated into a fault-tolerance framework to automatically detect environmental changes and propose network reconfigurations before service failures occur. An evaluation in a real industrial scenario demonstrated the practicality of the approach.
kiran_Basavaraju_LW
Kiran Basavaraju is seeking an opportunity in RF and wireless communication. He is currently pursuing a Master's degree in Electrical Engineering from the University of Texas at Dallas, expected to graduate in May 2015. He has relevant experience designing RF and microwave components such as amplifiers, filters, and antennas. He also has experience simulating wireless communication systems and analyzing link budgets and system performance.
resume
Manish Kumar Soni is seeking a position as a Design Engineer where he can apply his analytical skills in VLSI. He has a M.Tech in Microelectronics and VLSI Design from SGSITS Indore with a CGPA of 7.5. His skills include EDA tools like Cadence Virtuoso and expertise in analog circuit design, low power CMOS VLSI design, and digital signal processing. For his M.Tech final year project, he designed an instrumentation amplifier for biomedical applications. He is proficient in Linux and Windows platforms and has strong analytical abilities.
Holmstedt CV-2015
The document is a resume for Christian Holmstedt summarizing his experience and skills. It outlines his broad experience in radio astronomy systems and receivers, including analog and digital electronics design, electromechanical systems, automation, RF testing, vacuum technology, and clean room work. It also lists his technical skills and work history developing and testing cryogenically cooled low noise receivers for radio telescopes.
JuswantoWardojo
Juswanto Wardojo is an experienced electrical engineer with 22 years of experience developing RF, microwave, wireless, and fiber optic communication systems. He has expertise in C/C++, MATLAB, and CAD tools like ADS, Xilinx ISE, and PADS. Currently he works as a staff test engineer at Peregrine Semiconductor designing RF power amplifier production test platforms.
Energy consumption of wsn
This document discusses wireless sensor network applications and energy consumption. It provides examples of WSN applications including disaster relief, environment monitoring, healthcare, and more. It then discusses various factors that influence energy consumption in sensor nodes, including operation states, microcontroller usage, radio transceivers, memory, and the relationship between computation and communication. Specific power consumption numbers are given for different components like radios, sensors, and microprocessors. The goals of optimization for WSNs are discussed as quality of service, energy efficiency, scalability, and robustness.
Indian Space Research Organisation
The document provides information about various departments and research areas within the Department of Electrical Engineering at IIT Bombay that may be relevant for collaboration with ISRO. It discusses expertise in areas such as communications and signal processing, control and computing, microelectronics, power electronics, and VLSI design. Specific projects proposed for collaboration include work on antennas and microwaves, information networks, guidance and control systems, electronics, and power systems. Laboratories and facilities with relevant equipment for potential joint projects are also described.
Gopi tech-presentation
The document outlines the core team structure and general new project process of Laxmimayee Technologies Private Limited. It describes the roles of the Manager (Technical), Production Lead, Quality Lead, and Research, Application Development Lead, and Analysis Lead on the core team. It also lists several past experiences and case studies the company has completed, including projects involving paper charts, surveys, utilities like sewer and electrical systems, parcel mapping, data migration, thermal imaging, underground cables, and agriculture.
NegarSheiktaheri_Resume_2015
Negar Sheikhtaheri is seeking an electrical engineering position and has relevant experience from internships and education. She has a Master's degree in communication and signal processing from California State University, Fullerton and a Bachelor's degree in electrical engineering. Her internship experience includes testing roles at Broadcom Corp where she developed automated testing mechanisms and worked on RF calibration and testing of mobile devices and networking equipment.
Engineering Cross-Layer Fault Tolerance in Many-Core Systems
1) The document discusses engineering cross-layer fault tolerance in many-core systems. It proposes a cross-layer approach where fault tolerance is distributed across system layers rather than handled solely within a single layer.
2) A motivating example of cross-layer fault tolerance is discussed using TCP/IP, where errors can be detected and recovered across multiple layers for improved efficiency.
3) The challenges of ensuring cross-layer fault tolerance for many-core systems containing tens to thousands of cores are discussed to improve reliability, performance and energy efficiency.
4) The plan is to implement a case study of a car number plate recognition application to gain experience with cross-layer fault tolerance, and apply order graphs to model performance
Dotnet a data fusion technique for wireless ranging performance improvement
This paper analyzes the performance limitations of two wireless ranging techniques: received signal strength (RSS) and two-way time-of-flight (ToF) measurements. It then proposes a data fusion algorithm to combine the two techniques to improve ranging accuracy. The algorithm was implemented and tested on an embedded prototype using commercial off-the-shelf components. While not accurate enough for fine-grained indoor positioning, the results show the solution can reliably detect proximity and hazards indoors. Integrating ToF measurement directly into radio chips could further boost accuracy for applications like ambient assisted living.
BFunsten_Resume
Brad Funsten is an electrical engineering student at California Polytechnic State University expected to graduate in June 2015 with a B.S. and M.S. He has a 3.71 GPA and has made the Dean's List for 6 quarters. His coursework includes digital signal processing, analog/digital filter design, microcontroller programming, and more. He has experience programming in C, C++, and assembly and using test equipment, software tools like Cadence Virtuoso, and MATLAB. He has worked with Advanced Telesensors assisting with a radar filter design and is developing a radar monitor for the elderly as part of his thesis. He has also completed projects involving a ping pong ball launcher, luxmeter, computer
ahsan cv
M. Ahsan Azeem received a Bachelor of Electrical Engineering from the National University of Computer and Emerging Sciences in Islamabad, Pakistan. He completed projects in RF amplifier design, ladder logic implementation, ALU design on L-Edit, and microcontroller-based water level control. Ahsan also received a 4-year merit scholarship and interned at FESCO WAPDA, learning about grid station distribution panels and team management. His skills include RF circuit design using ADS, layout design on L-Edit and MicroWind, and C++ programming.
What's hot (13)
Java localization-based radio model calibration for fault-tolerant wireless ...
Java localization-based radio model calibration for fault-tolerant wireless ...
Engineering Cross-Layer Fault Tolerance in Many-Core Systems
Engineering Cross-Layer Fault Tolerance in Many-Core Systems
Dotnet a data fusion technique for wireless ranging performance improvement
Dotnet a data fusion technique for wireless ranging performance improvement
Similar to Chen Jia Resume Final
PhilipSamDavisResume
Philip "Sam" Davis is pursuing a PhD in electrical engineering from New Mexico State University with a focus on signal processing, embedded programming, and machine learning. He has extensive academic and research experience in these areas, including coursework, research projects analyzing EEG signals to predict human perceptions, and internships. His skills include signal processing, machine learning, embedded systems, and software/hardware design. He is currently finishing his dissertation and has published several papers in the field.
General Resume
Chad Stewart holds a Bachelor's degree in Aerospace Engineering and has experience as an Electronics Technician in the Navy where he held a secret security clearance. He has skills in Matlab, SolidWorks, ANSYS, STK, Python, and electronics test equipment. His experience includes projects involving satellite design, robotics programming, 3D printing, and lab work analyzing communication systems and transonic aerodynamic flows. He currently works as a Research Assistant designing sensors and was a Teaching Assistant for a Thermofluids course.
Resume Song Chen 2016
Song Chen has over 5 years of experience in electrical engineering and mechanical engineering. He has worked on developing inertial measurement units, fiber optic gyroscopes, and fiber optic current transducers. He is currently a PhD student researching flexible electronics fabrication and structural health monitoring applications. He has skills in C/C++, electrical design, PCB layout, and LabVIEW.
Summary
Stephen Wood has extensive experience in embedded software engineering, hardware engineering, and leading cross-functional teams. He has worked on several projects including developing a highly innovative medical laser system that was smaller and more powerful than competitors; designing a dual temperature sensor control algorithm for a precise CO2 incubator; and directing the development of next-generation packaging machinery. He also developed prototype testing systems and operating systems for various control applications using skills in software, electrical engineering, and mathematics.
Aplications for machine learning in IoT
Presented at the Intel Global IoT DevFest (Oct 2017)
- Real-world use cases: healthcare, building management, retail, smart cities, transportation
- Time-series analysis
- AI / ML overview & applications
Shilpi Sharma Resume
Shilpi Sharma is seeking a position as an RF and Microwave Design Engineer. She has a Master's degree in Electrical Engineering from UT Dallas with a 3.889 GPA and a Bachelor's degree in Electronics Engineering from Birla Institute of Technology with an 8.05/10 GPA. Her relevant coursework includes RF and Microwave Circuits, Systems Engineering, Amplifier Design, and Antenna Engineering. For course projects, she has designed and analyzed RF circuits and systems using software like AWR Microwave Office and HFSS and has experience measuring circuits using equipment like vector network analyzers. She has worked as an RF Antenna and System Research Assistant and had an internship at National Instruments in their A
BFunsten_Resume
Brad Funsten is an electrical engineering student at California Polytechnic State University expected to graduate in June 2015 with a B.S. and M.S. He has a 3.84 GPA and has made the Dean's List for 6 quarters. His coursework includes digital signal processing, analog/digital filter design, microcontroller programming, and more. He has experience with programming languages like C and C++, software like Cadence Virtuoso, and test equipment like oscilloscopes. For ongoing projects, he is characterizing electrocardiography signals using neural networks and developing a radar monitor for the elderly.
M.sc. m kamel
M.sc. Mahmoud Kamel, Developing a DSP Core using an FPGA Prototype for Scintillation Detector Signals, supervised by Dr. Ashraf Aboshosha, ICGST
SteveBrassResume_LinkedIn
Stephen C. Brass has extensive experience in medical device design and development, digital signal processing, hardware design, and software development. He has designed several medical products in compliance with relevant safety and regulatory standards. Additionally, he has experience managing all stages of product development from concept to completion. Brass holds an MS in Technical Management from Johns Hopkins University and a BSEE from Robert Gordon's Institute of Technology. He currently works as an independent consultant providing design services for various industrial, scientific, and medical clients.
Kiran Kumar Basavaraju_resume_TI_FT
Kiran Basavaraju is seeking an RF and wireless communication job for Spring 2015. He has experience as an RF engineer intern where he performed LTE network optimization and site testing. He has also presented workshops to increase children's interest in programming. His education includes a Master's degree in Electrical Engineering expected in May 2015 from UT Dallas with a 3.047 GPA, as well as a Bachelor's degree in Electronics and Communication from Visvesvaraya Technological University in India. He has skills in tools like Agilent ADS, AWR, MATLAB, and languages like Java, C, and HTML.
SteveCumminsResume25oct16
This document summarizes the experience and qualifications of Steven M. Cummins as a semiconductor test engineer. Over 25 years, he has developed test programs and hardware for mixed-signal, memory, logic, and sensor devices. He has worked at several companies in roles such as Principal Test Engineer, Test Engineer, and Product Engineer. His technical skills include languages like C, C++, and Verilog, and test equipment like Nextest and Teradyne testers.
JAH_RES 2013
This document is a resume for Jeffrey A. Hirsch that summarizes his professional qualifications and experience. Hirsch has over 40 years of experience in the analyzer, computer, and instrumentation fields. He is qualified to perform maintenance, repair, and calibration on various gas chromatographs and analyzers. Hirsch also has experience with control systems like Fisher Provox and Taylor Mod III. His background includes roles as a senior technical specialist, runout technician, analyzer and control system specialist, and DCS control system specialist.
BFunsten_Overall_Resume
Brad Funsten is an electrical engineering student at Cal Poly expected to graduate in June 2015 with a B.S. and M.S. He has a 3.76 GPA and has been on the Dean's List for 6 quarters. His coursework and areas of expertise include digital signal processing, microcontroller programming, VHDL/VLSI, and programming languages like C, C++, and assembly code. He has worked on projects involving ECG/phonocardiography characterization, a radar monitor for the elderly, a ping pong ball launcher, an FM radio transmitter/receiver, and more. He is currently working on his thesis involving neural networks, wavelets, and fuzzy logic to detect ECG abnormalities.
Giacomo Cernicchi - MSc_ENG
This document provides information about a Master of Science thesis titled "Design and implementation of a software module for the Media Server introduction in a Java Call Control development environment". The thesis involves implementing a software module to introduce a Media Server into a Java Call Control (JCC) development environment. The module, developed in Java, allows typical Media Server functionality using MGCP protocol. It integrates easily into a JCC Resource Adaptor and provides a tool for creating multimedia VoIP services in JCC. The document also lists subjects covered in the Msc (Hons) in Telecommunication and Computer Science Engineering program, including areas of telecommunications, automation, electronics, computer science, measurements and quality, and electromagnetic fields.
Design And Simulation of Modulation Schemes used for FPGA Based Software Defi...
Design of a BPSK and QPSK digital Modulation scheme and its implementation on FPGAs for universal mobile telecommunications system and SDR applications. The simulation of the system is made in MATLAB Simulink environment and System Generator, a tool used for FPGA design. Hardware Co-Simulation is designed using VHDL a hardware description language targeting a Xilinx FPGA and is verified using MATLAB Simulink. It is then converted to VHDL level using Simulink HDL coder. The design is synthesized and fitted with Xilinx 14.2 ISE Edition software, and downloaded to Spartan 3E (XC3S500E) board.
r1501e
George Vamos has over 30 years of experience as a lead software engineer developing mission critical systems. He has expertise in medical data management systems, aerospace command and control systems, and business databases. Some of his accomplishments include developing medical data warehouses that can adapt to changing data formats, and databases shared by spacecraft tracking systems where much of the schema is auto-generated from requirements. He holds patents related to neural implant management technology.
Model-Simulation-and-Measurement-Based Systems Engineering of Power System Sy...
The document discusses model-simulation-and-measurement-based systems engineering of power system synchrophasor systems. It outlines the speaker's background and research interests in modeling and simulation technologies for cyber-physical power systems. The talk motivates the need for these technologies to enable applications like wide-area control systems using synchronized phasor measurements. It also discusses challenges in developing smart grids as complex cyber-physical systems and the roles that modeling and simulation can play in addressing these challenges.
Jurovich CV 12-15b TE
This curriculum vitae summarizes Steve Jurovich's extensive experience over 38 years in test engineering roles, with a focus on design and implementation of test systems using LabVIEW. He has worked on projects in aerospace, defense, optics, lasers, communications and more. His background includes experience in test planning, instrumentation, data acquisition, analysis and documentation. He is seeking a role as a primary contributor on an R&D technical staff where he can apply his diverse test engineering expertise.
TOMMY RESUME 02-25-2016
Tommy Ngo is seeking a position utilizing his skills and experience in computer engineering. He has a Bachelor's degree in Computer Engineering and over 15 years of experience testing electronic components and systems. His experience includes testing seismographs, magnetometers, and other instruments at Geometrics Inc. and testing computer networks, hardware, and storage systems at Quanta Computer. He is proficient in various programming languages, operating systems, and electronic testing equipment.
SImOS
This project seeks to design innovative tools to measure in vivo biomechanical parameters of joint prostheses, orthopaedic implants, bones and ligaments. These tools, partly implanted, partly external, will record and analyze relevant information in order to improve medical treatments. An implant module includes sensors in order to measure the forces, temperature sensors to measure the interface frictions, magneto-resistance sensors to measure the 3D orientation of the knee joint as well as accelerometers to measure stem micro-motion and impacts. An external module, fixed on the patient.s body segments, includes electronic components to power and to communicate with the implant, as well as a set of sensors for measurements that can be realized externally.
This equipment is designed to help the surgeon with the alignment or positioning phase during surgery. After surgery, by providing excessive wear and micro-motion information about the prosthesis, it will allow to detect any early migration and potentially avoid later failure. During rehabilitation, it will provide useful outcomes to evaluate in vivo joint function. The tools provided can also be implanted during any joint surgery in order to give the physician the information needed to diagnose future disease such as ligament insufficiency, osteoarthritis or prevent further accident. The proposed nanosystems are set to improve the efficiency of healthcare, which is both a benefit to the patient and to society. Although the scientific and technical developments proposed in this project can be applied to all orthopaedic implants, the technological platform which is being built as a demonstrator is limited to the case of knee prosthesis. In addition, by reaching the minimum size achievable thanks to clever packaging techniques and also by reducing, or even removing, the cumbersome battery, it paves the way for a new generation of autonomous implantable medical devices.
Similar to Chen Jia Resume Final (20)
Design And Simulation of Modulation Schemes used for FPGA Based Software Defi...
Design And Simulation of Modulation Schemes used for FPGA Based Software Defi...
Model-Simulation-and-Measurement-Based Systems Engineering of Power System Sy...
Model-Simulation-and-Measurement-Based Systems Engineering of Power System Sy...
Chen Jia Resume Final
- 1. Chen Jia jiachen@ksu.edu 785-317-1968 PROFESSIONAL EXPERIENCE Hardware Engineer Reinke Manufacturing Company Inc, Deshler, Nebraska Designed and integrated new generation communication platform for irrigation SCADA system, including 900MHz ISM band radio, 3G cellular, and satellite (iridium radio) solutions Analyzed and implemented soil moisture monitoring systems Researched communication, including radio and cellular, requirements and solutions globally Graduate Research Assistant Kansas State University, Manhattan, Kansas NASA Project: Astronaut Muscle Fatigue Detection and Prediction Improved identifying accuracy of EMG bursts from 70% to over 98% by updating the sensing system and the processing algorithms in MATLAB to reduce the effect of background noise for random actions and movements Analyzed data from four EMG sensors located on different parts of the human body simultaneously NSF Project: Course Module Development Re-designed Linear Systems course modules to boost student comprehension using evaluation interviews of 150 students over four semesters Developed new modules relating to Fourier series parameter variations to improve student’s understanding of the Fourier series and frequency domain resulting in increases student scores from 55% to 70% Complex Permittivity Measurement of Soybean Protein in RF Created a hardware system to measure the complex permittivity of two different types of soybean proteins (7s and 11s) in the 100kHz to 3MHz frequency range Modeling and Simulation Engineering Intern Case and New Holland, Burr Ridge, Illinois Derived and simulated a valve movement model using data from pump systems in SimuLink/MATLAB Modified simulation software and helped test the new hardware simulator from DSPACE Other Hardware Projects Experience Designed double channels ECG and EMG sensing system and ZigBee wireless communication module, and manufactured with 0402 surface mount in reflow oven Designed and simulated operational amplifier to meet the standard of LM741 with BJT transistors, and designed the integrated circuit layout in CADENCE IC Layouts Co-Designed and built slips-and-falls prediction system Designed and manufactured 5.25GHz Doppler radar for speed testing Designed layout of Signal Generator in CADENCE and manufactured the PCB board with 0805 surface mount EDUCATION Kansas State University, Manhattan, Kansas PhD in Electrical Engineering Year: 2007-2014 GPA: 3.8 TECHNICAL SKILLS Software Skills: Matlab, JAVA, PHP, Simulink, SQL, CANDENCE (PCB & IC), VHDL Instruments Skills: Oscilloscope, Frequency Analyzer, Network Analyzer, Impedance Analyzer, Function Generator 2012-2014 2008-2012 2007-2008 Summer 2011 BeiHang University, Beijing, China B.S. in Electrical Engineering Year: 2003-2007 GPA: 3.2 (Ranked Top 20%) Summer 2013 Spring 2013 Spring 2011 Fall 2011 Summer 2012 Since 2014