http://www.fitec.edu.au/chainsaw-course-basic-tree-felling/ Chainsaw Ticket The Basic Tree Felling chainsaw training course covers 5 key aspects of chainsaw training – Felling equipment, Felling cuts, Safety, Hazards and Felling procedures. If your looking for chainsaw training or chainsaw ticket then see video's at; http://www.fitec.edu.au/chainsaw-course-basic-tree-felling/

1. Chainsaw Training
Basic Tree Felling
Nationally Accredited Training
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

2. Check that you have all your PPE (personal protective equipment) fire
and first aid gear, felling aids wedges, hammer, axe, spare bar and at least
1 spare chain, signage and spare saw.
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

3. All tools and equipment, well maintained and in safe working condition
(industry standard)
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

4. Use the felling line on the chainsaw to set the direction
and make the first cut
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

5. The top cut has been done, and faller is starting the second cut.
Make sure both cuts are level.
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

6. Keep firm grip on both handles, feet slightly apart and
let the chainsaw do the work
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

7. If there are overcuts, clean out the scarf
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

8. Clean, level scarf a 1/4 to a 1/3 the diameter of the tree
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

9. Double check the direction, before you start the felling cut.
Place your hammer or a wedge in the centre of the scarf
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

10. Make the felling cut, 10% of the diameter of the tree, above the
bottom cut of the scarf, and level
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

11. Continue with the felling cut, as you get close to setting the hinge,
keep an eye out for movement. The felling cut will start to open, look
straight up the stem it should be moving forward, if it doesn’t, place a
wedge in the felling cut and drive it until firm. Set the hinge and
switch chainsaw off and drive wedge until the tree releases.
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

12. Reference: http://www.osh.dol.govt.nz/order/catalogue/pdf/arborcode.pdf

13. There was little space to fall this forward leaning tree,
but after careful assessment we decided yes.
Pipe imbedded in ground for washing linePool fence Garden shedGarden
Felling direction: between
pool fence and washing line
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

14. Felling direction: between
pool fence and washing line
Pool fence Pipe imbedded in ground for washing line Garden shedGarden
All went as planned
© Fitec Australia Inc., 2013 | fitec.edu.au | 07 3456 7000

15. 07 3456 7000
info@fitec.edu.au
www.fitec.edu.au
Contact Us Today