1. The document provides instructions for disassembling and assembling components of the final drive, steering differential, and brake for a D6T Track-Type Tractor.
2. The disassembly procedure includes removing mounting bolts, seals, and using various specialty tools to separate internal components like carriers, gears, and shafts.
3. Reassembly is the reverse of disassembly, applying clean oil and torquing bolts to the specified values.
This document provides instructions for disassembling the steering differential and brake of a D6T track-type tractor. It describes removing 8 spring pins to separate the brake housing from the differential case. Several components are then removed from the housing and case, including the brake discs, pins, and bearings. Proper cleaning is emphasized before inspection and replacement of worn parts.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T Track-Type Tractor. It describes removing components like the axles, steering motor, floorplate, and plate under the seat. It then explains how to use lifting brackets and link brackets to remove the final drive, steering differential, and brake assembly as a unit for maintenance or repair.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T track-type tractor. Key steps include using specialized tools to remove the adapter, sliding carrier, and final drive/differential assembly. The assembly procedure involves installing components in reverse order and adjusting bearing temperatures during installation.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T track-type tractor. Key steps include using specialized tools to remove the adapter, sliding carrier, and final drive/differential assembly. The assembly procedure involves installing components in reverse order and adjusting bearing temperatures during installation.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T track-type tractor. Key steps include using specialized tools to remove the adapter, sliding carrier, and final drive/differential assembly. The assembly procedure involves installing components in reverse order and adjusting bearing temperatures during installation.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T Track-Type Tractor. It outlines 19 steps to disassemble components like the planetary carrier, hub, and ring gear. It also lists 18 steps to reassemble these components, ensuring proper installation of seals and applying the correct temperatures to bearings. Tools required are also identified.
The document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T Track-Type Tractor, including removing bolts, seals, and gears, and installing replacement parts like bearings using various specialized tools. Detailed illustrations accompany each step to ensure correct disassembly and reassembly of the complex power train components.
The document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T Track-Type Tractor, including removing bolts, seals, and gears, and installing replacement parts like bearings using various specialized tools. Detailed illustrations accompany each step to ensure correct disassembly and reassembly of the components.
This document provides instructions for disassembling the steering differential and brake of a D6T track-type tractor. It describes removing 8 spring pins to separate the brake housing from the differential case. Several components are then removed from the housing and case, including the brake discs, pins, and bearings. Proper cleaning is emphasized before inspection and replacement of worn parts.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T Track-Type Tractor. It describes removing components like the axles, steering motor, floorplate, and plate under the seat. It then explains how to use lifting brackets and link brackets to remove the final drive, steering differential, and brake assembly as a unit for maintenance or repair.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T track-type tractor. Key steps include using specialized tools to remove the adapter, sliding carrier, and final drive/differential assembly. The assembly procedure involves installing components in reverse order and adjusting bearing temperatures during installation.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T track-type tractor. Key steps include using specialized tools to remove the adapter, sliding carrier, and final drive/differential assembly. The assembly procedure involves installing components in reverse order and adjusting bearing temperatures during installation.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T track-type tractor. Key steps include using specialized tools to remove the adapter, sliding carrier, and final drive/differential assembly. The assembly procedure involves installing components in reverse order and adjusting bearing temperatures during installation.
This document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T Track-Type Tractor. It outlines 19 steps to disassemble components like the planetary carrier, hub, and ring gear. It also lists 18 steps to reassemble these components, ensuring proper installation of seals and applying the correct temperatures to bearings. Tools required are also identified.
The document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T Track-Type Tractor, including removing bolts, seals, and gears, and installing replacement parts like bearings using various specialized tools. Detailed illustrations accompany each step to ensure correct disassembly and reassembly of the complex power train components.
The document provides instructions for disassembling and assembling the final drive, steering differential, and brake on the left side of a D6T Track-Type Tractor, including removing bolts, seals, and gears, and installing replacement parts like bearings using various specialized tools. Detailed illustrations accompany each step to ensure correct disassembly and reassembly of the components.
The document provides instructions to disassemble and assemble the final drive, steering differential, and brake on the left side of a D6T track-type tractor. It describes removing and installing various components using various tools, including removing the drive axles, steering motor, and draining final drive oil. Steps include removing bolts and nuts, lifting components, and installing seals and bearings at specified temperatures to ensure proper assembly.
The document provides instructions to disassemble and assemble the final drive, steering differential, and brake on the left side of a D6T track-type tractor. It describes removing and installing various components using various tools, including removing the drive axles, steering motor, and draining final drive oil. Steps include removing bolts and nuts, lifting components, and installing seals and bearings at specified temperatures to ensure proper assembly.
The document provides instructions to disassemble and assemble the final drive, steering differential, and brake on the left side of a D6T track-type tractor. It describes removing and installing various components using various tools, including removing the drive axles, steering motor, and draining final drive oil. Steps include removing bolts and nuts, lifting components, and installing seals and bearings at specified temperatures to ensure proper assembly.
The document provides instructions for disassembling and assembling the final drive of a D6T track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, bearings and hub. The assembly procedure describes installing these 19 components in reverse order and includes cleaning parts, heating and pressing components, and torquing bolts to the specified values. Proper installation of each part is emphasized to ensure correct functioning of the final drive.
The document provides instructions for disassembling and assembling the final drive of a D6T track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, bearings and hub. The assembly procedure provides 19 steps for installing these same components in reverse order and includes cleaning parts and applying oil, as well as procedures for installing seals and setting bearing preloads. Safety notices are included to warn of heavy component weights and ensure correct shaft installation.
The document provides instructions for disassembling and assembling the final drive of a D6T track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, bearings and hub. The assembly procedure lists 19 steps and provides illustrations of how to install these components in the reverse order, applying clean oil and controlling bearing temperatures during assembly. Proper torque values and alignment of components is emphasized to ensure correct assembly.
The document provides instructions for disassembling and assembling the final drive of a D6T track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, bearings and hub. The assembly procedure lists 19 steps and provides illustrations of how to install these components in the reverse order, applying clean oil and properly heating and positioning each part. Special tools and torque specifications are listed to ensure correct reassembly.
The document provides instructions for removing and installing components of the final drive, steering differential, and brake for the left side of a D6T track-type tractor. It lists required tools and outlines a 19-step procedure that includes removing the adapter, sliding the carrier off the bevel gear shaft using an axle removal tool, and lifting out the final drive assembly with a bracket and lifting device.
Massey Ferguson MF 384 S TRACTOR (- 300993) Parts Catalogue Manual Instant Do...onyvzcwadtu05
This document contains parts listings and technical specifications for the engine of a Massey Ferguson 384 S tractor. It includes 6 pages detailing over 60 individual parts for the engine, including the cylinder block, crankshaft, pistons, cylinder head, rocker shaft, and air induction and exhaust systems. Each part is listed with its part number, quantity, description, and any relevant comments.
Massey Ferguson MF 384 F TRACTOR, - 0894 Parts Catalogue Manual Instant Downl...onyvzcwadtu05
The document is a parts catalog for a Massey Ferguson MF 384 F tractor engine. It lists over 60 individual parts for the engine, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft and other components. Each part is given a reference number, part number, quantity and description, along with any replacement or additional part information.
The document suggests that if clicking the above button is invalid, the user should first download the document and then click the link to download the complete manual. It thanks the reader for their time.
This document provides instructions for disassembling and assembling the main hydraulic pump on a M315D Wheeled Excavator. It lists 34 steps for disassembly, removing components like pistons, springs, seals and housing pieces. It then lists 36 steps for assembly, installing components in reverse order and noting proper orientation of marked parts. Precautions are provided regarding contained fluids, released spring forces, and keeping parts clean from contaminants. Required specialty tools are also listed.
This document provides instructions for assembling the main hydraulic pump on an excavator model. It lists the required tools and parts. It then provides 49 steps with accompanying illustrations, describing how to install each component of the pump in detail, including bearings, seals, pistons, springs, and valves. The final step instructs the technician to install the assembled pump.
The document provides instructions for installing a swing drive on an excavator model M315D. It lists the required tools and parts. The procedure involves 28 steps, including installing bearings, seals, gears, and other components into the swing drive housing. Specific torque specifications and dimensional checks are listed to ensure proper assembly. Installation is completed by positioning the swing drive in the swing brake housing and securing it with bolts.
This document provides instructions for removing and installing a pilot control valve on a D10 track-type tractor. Key steps include removing the right side console cover, disconnecting control rods from the valve spools using pins and cotter pins, labeling and disconnecting all oil lines, and removing bolts to take off the pilot control valve. Reinstallation involves installing the pilot control valve on the bracket with bolts, connecting the labeled oil lines, and attaching the control rods to the valve spools with pins and cotter pins.
This document provides instructions for disassembling and assembling the final drive of a D9R track-type tractor. It describes removing components such as the planetary carrier, gears, shafts, and hub. Various tools are required, including link brackets, a push-puller tool group, driver group, and hydraulic cylinder assembly. Precautions are given for using hydraulic cylinders and puller studs during disassembly. The multi-step process includes pressing, lifting, and removing components from the planetary carrier, sun gear, and hub.
This document provides instructions to disassemble and assemble the final drive of a D9R track-type tractor. It describes:
1) Removing over 30 components of the final drive including gears, shafts, bearings, seals and hubs using various tools.
2) Inspecting all parts and replacing any that are damaged.
3) Heating some bearings cones to aid removal and ensuring proper temperatures when installing.
4) Precisely assembling the components in reverse order, taking care with sealing surfaces.
1) The document provides instructions for removing and installing the final drive planetary carrier in a D9R track-type tractor.
2) It describes using various tools to remove the carrier, hub components, seals, and gears. It then explains how to clean and prepare the parts for installation and use the tools to reinstall the components in reverse order.
3) Fourteen steps are outlined to remove the carrier and twelve steps are provided to install it back into the final drive assembly.
The document provides instructions for disassembling and assembling the steering clutch and brake of a Caterpillar D7R track-type tractor. It details 20 steps to disassemble the components which include removing bolts, plates, bearings, seals and other parts. The 20 steps to assemble are also outlined and include cleaning parts, applying oil, heating bearings, and reinstalling components in reverse order. Special safety precautions are noted regarding spring loaded components.
The document provides assembly instructions for installing a final drive on a D7R track-type tractor. It describes 31 steps to assemble bearings, seals, gears, shafts, covers and other components. Tools required include drivers, seal installers, brackets and spacers. Precise torques and clearances are specified. The assembly is completed by filling the final drive with oil and reconnecting the track.
Caterpillar Cat D7R II WATER FORDING TRACTOR (Prefix DJT) Service Repair Manu...onyvzcwadtu05
This document provides instructions for disassembling and assembling the steering planetary and brake of a D7R Series II Water Fording Tractor. It describes removing 24 components including the planetary group, brake, ring gear, friction discs, piston, and springs. Reassembly involves installing these components in reverse order, noting proper orientation and torque specifications. Tools required include link brackets, a driver group, forcing bolts, and sealant.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...onyvzcwadtu05
The document provides instructions for removing a final drive, steering planetary, and brake assembly from a D7R II track-type tractor. It describes using lifting brackets, shackles, bolts and nuts to attach a hoist to the assembly and remove it from the tractor. The assembly weighs approximately 800 kg (1750 lb) and precautions are listed to provide means to stop the machine without the brake installed. Fluids must be contained while working on components to collect any fluids that may drain out.
More Related Content
Similar to Caterpillar Cat D6T XL PAT TRACK-TYPE TRACTOR (Prefix WES) Service Repair Manual Instant Download.pdf
The document provides instructions to disassemble and assemble the final drive, steering differential, and brake on the left side of a D6T track-type tractor. It describes removing and installing various components using various tools, including removing the drive axles, steering motor, and draining final drive oil. Steps include removing bolts and nuts, lifting components, and installing seals and bearings at specified temperatures to ensure proper assembly.
The document provides instructions to disassemble and assemble the final drive, steering differential, and brake on the left side of a D6T track-type tractor. It describes removing and installing various components using various tools, including removing the drive axles, steering motor, and draining final drive oil. Steps include removing bolts and nuts, lifting components, and installing seals and bearings at specified temperatures to ensure proper assembly.
The document provides instructions to disassemble and assemble the final drive, steering differential, and brake on the left side of a D6T track-type tractor. It describes removing and installing various components using various tools, including removing the drive axles, steering motor, and draining final drive oil. Steps include removing bolts and nuts, lifting components, and installing seals and bearings at specified temperatures to ensure proper assembly.
The document provides instructions for disassembling and assembling the final drive of a D6T track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, bearings and hub. The assembly procedure describes installing these 19 components in reverse order and includes cleaning parts, heating and pressing components, and torquing bolts to the specified values. Proper installation of each part is emphasized to ensure correct functioning of the final drive.
The document provides instructions for disassembling and assembling the final drive of a D6T track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, bearings and hub. The assembly procedure provides 19 steps for installing these same components in reverse order and includes cleaning parts and applying oil, as well as procedures for installing seals and setting bearing preloads. Safety notices are included to warn of heavy component weights and ensure correct shaft installation.
The document provides instructions for disassembling and assembling the final drive of a D6T track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, bearings and hub. The assembly procedure lists 19 steps and provides illustrations of how to install these components in the reverse order, applying clean oil and controlling bearing temperatures during assembly. Proper torque values and alignment of components is emphasized to ensure correct assembly.
The document provides instructions for disassembling and assembling the final drive of a D6T track-type tractor. The disassembly procedure involves using various tools to remove 19 different components of the final drive including the planetary carrier, gears, seals, bearings and hub. The assembly procedure lists 19 steps and provides illustrations of how to install these components in the reverse order, applying clean oil and properly heating and positioning each part. Special tools and torque specifications are listed to ensure correct reassembly.
The document provides instructions for removing and installing components of the final drive, steering differential, and brake for the left side of a D6T track-type tractor. It lists required tools and outlines a 19-step procedure that includes removing the adapter, sliding the carrier off the bevel gear shaft using an axle removal tool, and lifting out the final drive assembly with a bracket and lifting device.
Similar to Caterpillar Cat D6T XL PAT TRACK-TYPE TRACTOR (Prefix WES) Service Repair Manual Instant Download.pdf (8)
Massey Ferguson MF 384 S TRACTOR (- 300993) Parts Catalogue Manual Instant Do...onyvzcwadtu05
This document contains parts listings and technical specifications for the engine of a Massey Ferguson 384 S tractor. It includes 6 pages detailing over 60 individual parts for the engine, including the cylinder block, crankshaft, pistons, cylinder head, rocker shaft, and air induction and exhaust systems. Each part is listed with its part number, quantity, description, and any relevant comments.
Massey Ferguson MF 384 F TRACTOR, - 0894 Parts Catalogue Manual Instant Downl...onyvzcwadtu05
The document is a parts catalog for a Massey Ferguson MF 384 F tractor engine. It lists over 60 individual parts for the engine, including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft and other components. Each part is given a reference number, part number, quantity and description, along with any replacement or additional part information.
The document suggests that if clicking the above button is invalid, the user should first download the document and then click the link to download the complete manual. It thanks the reader for their time.
This document provides instructions for disassembling and assembling the main hydraulic pump on a M315D Wheeled Excavator. It lists 34 steps for disassembly, removing components like pistons, springs, seals and housing pieces. It then lists 36 steps for assembly, installing components in reverse order and noting proper orientation of marked parts. Precautions are provided regarding contained fluids, released spring forces, and keeping parts clean from contaminants. Required specialty tools are also listed.
This document provides instructions for assembling the main hydraulic pump on an excavator model. It lists the required tools and parts. It then provides 49 steps with accompanying illustrations, describing how to install each component of the pump in detail, including bearings, seals, pistons, springs, and valves. The final step instructs the technician to install the assembled pump.
The document provides instructions for installing a swing drive on an excavator model M315D. It lists the required tools and parts. The procedure involves 28 steps, including installing bearings, seals, gears, and other components into the swing drive housing. Specific torque specifications and dimensional checks are listed to ensure proper assembly. Installation is completed by positioning the swing drive in the swing brake housing and securing it with bolts.
This document provides instructions for removing and installing a pilot control valve on a D10 track-type tractor. Key steps include removing the right side console cover, disconnecting control rods from the valve spools using pins and cotter pins, labeling and disconnecting all oil lines, and removing bolts to take off the pilot control valve. Reinstallation involves installing the pilot control valve on the bracket with bolts, connecting the labeled oil lines, and attaching the control rods to the valve spools with pins and cotter pins.
This document provides instructions for disassembling and assembling the final drive of a D9R track-type tractor. It describes removing components such as the planetary carrier, gears, shafts, and hub. Various tools are required, including link brackets, a push-puller tool group, driver group, and hydraulic cylinder assembly. Precautions are given for using hydraulic cylinders and puller studs during disassembly. The multi-step process includes pressing, lifting, and removing components from the planetary carrier, sun gear, and hub.
This document provides instructions to disassemble and assemble the final drive of a D9R track-type tractor. It describes:
1) Removing over 30 components of the final drive including gears, shafts, bearings, seals and hubs using various tools.
2) Inspecting all parts and replacing any that are damaged.
3) Heating some bearings cones to aid removal and ensuring proper temperatures when installing.
4) Precisely assembling the components in reverse order, taking care with sealing surfaces.
1) The document provides instructions for removing and installing the final drive planetary carrier in a D9R track-type tractor.
2) It describes using various tools to remove the carrier, hub components, seals, and gears. It then explains how to clean and prepare the parts for installation and use the tools to reinstall the components in reverse order.
3) Fourteen steps are outlined to remove the carrier and twelve steps are provided to install it back into the final drive assembly.
The document provides instructions for disassembling and assembling the steering clutch and brake of a Caterpillar D7R track-type tractor. It details 20 steps to disassemble the components which include removing bolts, plates, bearings, seals and other parts. The 20 steps to assemble are also outlined and include cleaning parts, applying oil, heating bearings, and reinstalling components in reverse order. Special safety precautions are noted regarding spring loaded components.
The document provides assembly instructions for installing a final drive on a D7R track-type tractor. It describes 31 steps to assemble bearings, seals, gears, shafts, covers and other components. Tools required include drivers, seal installers, brackets and spacers. Precise torques and clearances are specified. The assembly is completed by filling the final drive with oil and reconnecting the track.
Caterpillar Cat D7R II WATER FORDING TRACTOR (Prefix DJT) Service Repair Manu...onyvzcwadtu05
This document provides instructions for disassembling and assembling the steering planetary and brake of a D7R Series II Water Fording Tractor. It describes removing 24 components including the planetary group, brake, ring gear, friction discs, piston, and springs. Reassembly involves installing these components in reverse order, noting proper orientation and torque specifications. Tools required include link brackets, a driver group, forcing bolts, and sealant.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...onyvzcwadtu05
The document provides instructions for removing a final drive, steering planetary, and brake assembly from a D7R II track-type tractor. It describes using lifting brackets, shackles, bolts and nuts to attach a hoist to the assembly and remove it from the tractor. The assembly weighs approximately 800 kg (1750 lb) and precautions are listed to provide means to stop the machine without the brake installed. Fluids must be contained while working on components to collect any fluids that may drain out.
This document provides instructions for disassembling and assembling the final drives on a D7H track-type tractor. The main steps for disassembly are to remove the final drives from the machine, then disassemble the internal components which include removing planet carriers, gears, shafts, and bearings. For assembly, the components are installed in reverse order, with specifics on cleaning, heating/cooling parts, and using installation tools to properly set clearances and ensure metal-to-metal contact between parts.
This document provides instructions for servicing the final drives on a D7H track-type tractor. It describes how to remove and disassemble the final drives, including removing the planet carriers, gears, shafts and other components. It then describes how to assemble the final drives, including installing bearings, seals, rings and other parts back into the hubs and carriers. The goal is to provide maintenance technicians with step-by-step directions for servicing these critical components.
1) The document provides instructions for removing and installing pistons, connecting rods, connecting rod bearings, and crankshaft main bearings for a Caterpillar 3306 engine.
2) The procedure involves using tools to compress piston rings, installing pistons and connecting rods onto the crankshaft, checking clearances of connecting rod bearings, and removing/installing main bearing caps.
3) Technicians are advised to keep all parts clean and lubricated with engine oil to prevent damage and wear.
The document provides instructions for removing and installing sprocket assemblies on a track-type tractor. It involves 22 steps to remove the assemblies, which includes draining oil, removing seals, bearings, and other components. The 23 steps to install include pressing in new seals, bearings, and sprockets using specialized tools and applying precise forces, and adjusting bearings after reinstalling track roller frames. Proper cleaning, lubrication and torque specifications are noted throughout.
The document provides step-by-step instructions for removing and installing sprocket assemblies on a final drive case. It involves draining oil, removing the sprocket and various components using specialized tools, cleaning surfaces, replacing seals, installing new components in reverse order, and filling with oil. Proper alignment and torque specifications are noted throughout.
The document provides instructions for removing and installing final drive case assemblies on a D7G track-type tractor. It describes draining oil from the final drive case and removing components like caps, locks, nuts, seals and bearings. It explains using tools and hoists to separate the sprocket, holder assembly and adjusting nut as a unit from the tapered sprocket shaft. Finally, it outlines reinstalling the sprocket assembly and adjusting the bearings.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Caterpillar Cat D6T XL PAT TRACK-TYPE TRACTOR (Prefix WES) Service Repair Manual Instant Download.pdf
1. Product: TRACK-TYPE TRACTOR
Model: D6T XL PAT TRACK-TYPE TRACTOR WES
Configuration: D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Steering WES00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i04164792
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
138-7573 Link Bracket 3
1A-2029 Bolt 3
B 1P-0510 Driver Group 1
D
138-7574 Link Bracket 2
2A-1538 Bolt 2
E 1U-6437 Duo-Cone Seal Installer As 1
1. Apply clean oil to all the parts during assembly.
Illustration 1 g00841209
2. Use Tooling (B) to install lip seal (17) in spindle (13) to a minimum depth of 9.65 mm (0.4 inch). Do not apply
excessive force to lip seal (17) during installation in order to avoid damaging the seal. Put clean oil on the lip of
the seal.
1/5
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. 3. Raise the temperature of bearing cone (18) to a maximum temperature of 135 °C (275 °F). Install bearing cone
(18) on spindle (13) .
Note: Before the installation of the Duo-Cone seal, refer to Disassembly and Assembly, "Duo-Cone
Conventional Seals - Install" for the correct procedure.
4. Use Tooling (E) to install the Duo-Cone seal on spindle (13) .
Illustration 2 g00841210
5. Lower the temperature of bearing cups (14) and (16). Install bearing cups (14) and (16) in hub (12) .
6. Use Tooling (E) to install the Duo-Cone seal in hub (12) .
Illustration 3 g01195917
7. Install Tooling (D) on hub (12). Attach a suitable lifting device to Tooling (D). Carefully position hub (12) on
spindle (13) .
2/5
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 4 g00841212
8. Raise the temperature of bearing cone (11). Install bearing cone (11) on spindle (13).
Illustration 5 g01195915
9. Attach a suitable lifting device to hub (9) and position hub (9) in ring gear (8). Install retaining ring (10) .
Illustration 6 g01195913
10. Turn over the hub (9) and ring gear (8). Attach a suitable lifting device to hub (9) and the ring gear (8) into
position in hub (12).
Illustration 7 g00841092
11. Put retainer (7) into position. Install bolts (6) while the hub is slowly rotated. Tighten bolts (6) evenly to a
torque of 135 ± 15 N·m (100 ± 11 lb ft). The retainer must contact the end of spindle (13) after bolts (6) have
been tightened.
3/5
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 8 g00841213
12. Lower the temperature of bearing cups (20) and (21). Install the bearing cups in three planetary gears (4) .
Illustration 9 g00841215
Illustration 10 g00841216
13. Position the planetary carrier in a press. The shaft (22) must be in position with proper support in order to be a
positive stop for the shaft.
NOTICE
4/5
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. The shaft must be correctly installed. If the shaft is incorrectly
installed, the bearing preload will be incorrect. This will result in
component damage.
14. Position planetary gear (4) in the planetary carrier.
15. Lower the temperature of shaft (22). Use a suitable press to install the shaft in the planetary carrier. After the
installation, the end of shaft (22) must be flush with the retainer of the planetary carrier. This will provide the
correct bearing preload. The gear must rotate by hand after installation. If the gear does not rotate, the problem
must be corrected. Repeat this procedure for all three shafts.
Illustration 11 g01195912
16. Install three retainers (2) on shafts (22) .
17. Install Tooling (A). Attach a suitable lifting device to Tooling (A). Install the two O-ring seals on the planetary
carrier. Align the drain hole in the planetary carrier with the drain hole in the hub.
18. Position the planetary carrier in the hub.
19. Install bolts (1) that hold planetary carrier (3) to the hub. Remove Tooling (A) .
End By: Install the final drives.
5/5
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Product: TRACK-TYPE TRACTOR
Model: D6T XL PAT TRACK-TYPE TRACTOR WES
Configuration: D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Steering WES00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i06852073
Final Drive, Steering Differential, and Brake (Left Side) - Remove and
Install
SMCS - 4050-010-LT; 4132-010-LT
Removal Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A
FT-1952 Axle Removal Tool 1
1U-7432 Adapter Assembly 1
B
8T-3207 Lifting Bracket 1
5P-8622 Shackle 1
1D-4615 Bolt 2
1B-4331 Nut 2
5P-8248 Washer 4
C
1B-4331 Nut 1
5P-8248 Washer 2
439-3939 Link Bracket 1
439-3940 Link Bracket 1
8S-9906 Ratchet Puller 1
1A-1460 Bolt 1
5P-8245 Washer 1
1A-8063 Bolt 1
D 5B-4274 Bolt 3
Start By:
a. Separate the track.
b. Remove the drive axles.
1/6
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. c. Remove the steering motor.
d. Drain the oil from the final drive. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change".
Illustration 1 g01127146
1. Remove bolts (1) from adapter (2).
2. Install Tooling (D) in Holes (X). Remove adapter (2).
2/6
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 4. Insert Tooling (A) 940 mm (37.0 inch) in the final drive housing. Use Tooling (A) in order to slide the sliding
carrier off the bevel gear shaft.
5. Rotate Tooling (A) by 180 degrees.
6. Pull Tooling (A) until the sliding carrier stops.
7. Rotate Tooling (A) by 180 degrees and remove Tooling (A).
Illustration 5 g01127173
4/6
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 6 g01127177
8. Adjust Tooling (B) as Tooling (B) is shown in Illustration 5. Remove two bolts (4). Install Tooling (B) and a
suitable lifting device. The weight of the final drive, the differential, and the brake is approximately 730 kg
(1610 lb).
9. Remove seven bolts (5). Install Tooling (C).
Illustration 7 g01127323
10. Remove remaining bolts (5) and remove bolts (7). Do not remove bolts (6).
5/6
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 8 g01127327
11. Pull outward on final drive (9), steering differential (10), and brake (11) by approximately 25 mm (1.0 inch).
Final drive (9), steering differential (10), and brake (11) should move freely.
12. Use Tooling (C) in order to rotate final drive (9), steering differential (10), and brake (11) by 45 to 60 degrees
counterclockwise.
13. Remove final drive (9), steering differential (10), and brake (11).
14. Remove O-ring seals (8).
Installation Procedure
1. Install the left side assembly in the reverse order of the removal procedure.
a. Tighten bolts (5) to a torque of 800 ± 90 N·m (590 ± 66 lb ft).
b. Lubricate two new sprocket segment bolts (4) with SAE 30 oil. Install new sprocket segment bolts (4).
c. Tighten bolts (4) to a torque of (4) to a torque of 175 ± 40 N·m (130 ± 30 lb ft). Tighten bolts (4) for
another 1/3 turn. The final torque for bolts (4) must be a minimum of 380 N·m (280 lb ft).
6/6
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Product: TRACK-TYPE TRACTOR
Model: D6T XL PAT TRACK-TYPE TRACTOR WES
Configuration: D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Steering WES00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i06983822
Steering Differential and Brake - Disassemble
SMCS - 4131-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A 138-7573 Link Bracket 2
B 3K-4897 Spring Pin 8
C 6V-4072 Spanner Wrench 1
D
9S-9154 Step Plate 1
6V-3009 Bar 1
8S-6470 Forcing Screw 3/4 inch - 16 by 4 inch 1
8S-5133 Plug 1
5P-8245 Washer 4
1D-4719 Nut 1/2 inch - 13 2
2H-6488 Bolt 1/2 inch - 13 by 5 inch 2
E
9S-9154 Step Plate 1
6V-3009 Bar 1
8S-6470 Forcing Screw 3/4 inch - 16 by 4 inch 1
8S-5133 Plug 1
5P-8245 Washer 4
1D-4719 Nut 1/2 inch - 13 2
1D-4574 Bolt 1/2 inch - 13 by 6 inch 2
8H-0663 Bearing Puller 1
F 138-7575 Link Bracket 3
G 8B-7550 Leg 2
8B-7559 Adapter 2
1/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 3H-0465 Plate 4
1P-0498 Plate 1
1B-4207 Nut 3/4 inch - 16 2
5H-9976 Forcing Screw 1 inch - 14 by 5 3/4 inch 1
5B-0637 Nut 1 inch - 14 1
8H-0684 Ratchet Wrench 1
8B-7563 Handle 1
5F-7353 Washer (Thrust) 1
8B-7548 Push-Puller Tool Gp 1
Start By:
a. Remove the left final drive, the steering differential, and the brake. Refer to Disassembly and Assembly, "Final
Drive, Steering Differential, and Brake (Left Side) - Remove"
.
Illustration 1 g00823680
1. Remove bolts (1) and washers.
2. Remove two opposite bolts (2).
2/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 2 g00823691
3. Attach Tooling (A) and a suitable lifting device.
4. Remove sliding carrier (3). The weight of sliding carrier (3) is approximately 48 kg (105 lb).
5. Remove Tooling (A).
Illustration 3 g06187075
6. Remove remaining bolts (2) and slinger (4) from planetary carrier (7).
7. Remove retaining ring (5), thrust ring (5A), and planetary carrier (7) from ring gear (6).
3/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 4 g00823775
8. Remove seal ring (10) from planetary carrier (7).
9. Use a hammer and a punch to push pin (12) in shaft (11).
10. Remove shaft (11), planetary gear (9), discs (8), and bearing (13) from planetary carrier (7).
11. Remove pin (12) from shaft (11).
12. Repeat Steps 9 through 11 for the remaining planetary gears.
4/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 5 g00823759
13. Remove lockring (14) and remove retaining ring (16).
14. Remove sun gear (15) from planetary carrier (18).
15. Remove spacer (17).
Illustration 6 g00823816
16. Remove bolts (19), plate (20), and gear (21) from planetary carrier (18).
17. Use Tooling (B) to compress the retaining ring that holds planetary carrier (18) in ring gear (6).
18. Separate planetary carrier (18) from ring gear (6).
19. Remove the retaining ring from planetary carrier (18).
20. Use a hammer and a punch to push pin (23) in shaft (24).
5/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 7 g00823872
21. Remove shaft (24), planetary gear (22), discs (26), and bearing (25) from planetary carrier (18).
22. Remove pin (23) from shaft (24).
23. Repeat Steps 20 through 22 for the remaining planetary gears.
Illustration 8 g00823878
6/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 24. Place a bolt in the teeth of bevel pinion (27) to prevent movement.
Illustration 9 g00823884
25. Bend the tang on lock washer (29) away from nut (28).
26. Use Tooling (C) to remove nut (28) from the pinion.
27. Remove lockwasher (29) and washer (30) from the pinion.
28. Remove bolt (32).
29. Remove planetary carrier (31) from the support bracket.
7/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 10 g00823890
30. Use Tooling (D) to force bevel pinion (27) from bearing cone (33) and planetary carrier (31).
Illustration 11 g00824243
31. Use Tooling (E) to remove bearing cone (34) from planetary pinion (27).
8/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 12 g00824263
32. Remove bearing cups (35) from carrier (31).
Illustration 13 g00824265
33. Remove bolts (36).
34. Remove support bracket (37) and shims (38) from the housing.
9/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 35. Remove bolts (39).
36. Remove bevel gear (40) from housing (41).
Illustration 14 g00824268
37. Attach Tooling (F) and a suitable lifting device to brake housing (42).
38. Remove bolts (43).
39. Remove brake housing (42) from the final drive housing (44). The weight of brake housing (42) is
approximately 150 kg (335 lb).
10/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential S...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 15 g00824819
Illustration 16 g00824349
Personal injury can result from parts and/or covers under spring
pressure.
11/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential S...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
40. Remove bolts and washers (45).
41. Remove retainer (46) and thrust washer (47).
42. Remove hub (48), friction discs, and brake plates (49).
43. If necessary, remove ring (50) from hub (48).
44. Remove thrust washer (51).
Illustration 17 g00824351
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
45. Remove bolts (52) slowly.
46. Remove retainer (53), ring (54), and ring seal (55) from brake housing (42).
12/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential S...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 18 g00824691
47. Remove bolts (56), plate (57), shim pack (58), piston (59), and spring (60) from brake housing (42).
Illustration 19 g00824366
48. Use Tooling (G) to separate brake housing (42) and bearing cone (61) from housing (41).
49. Attach a suitable lifting device and Tooling (F) to brake housing (42).
13/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential S...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 50. Remove brake housing (42) from housing (41). The weight of brake housing (42) is approximately 77 kg
(170 lb). The weight of housing (41) is approximately 25 kg (55 lb).
Illustration 20 g00824415
NOTICE
The component will be destroyed if the component is removed.
51. If necessary, remove bearing cone (61) from housing (41).
52. Remove bearing cups (62) and (64) from brake housing (42).
NOTICE
The component will be destroyed if the component is removed.
53. If necessary, remove bearing cone (65) from housing (41).
54. Remove O-ring seal (63) from brake housing (42).
14/14
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential S...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Product: TRACK-TYPE TRACTOR
Model: D6T XL PAT TRACK-TYPE TRACTOR WES
Configuration: D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Steering WES00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i04165349
Steering Differential and Brake - Assemble
SMCS - 4131-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A 138-7573 Link Bracket 2
B 3K-4897 Spring Pin 8
C 6V-4072 Spanner Wrench 1
F 138-7575 Link Bracket 3
H
8S-5132 Plate 1
3B-1915 Bolt (3/8 inch by 16 by 1 3/8 inch) 3
6V-8801 Nut (3/8 inch by 16) 3
5M-2894 Washer 6
1B-9575 Bolt (5/16 inch by 18 by 1 3/4 inch) 1
1D-4716 Nut (5/16 inch by 18) 1
9M-1974 Washer 2
5M-2894 Washer 2
J 6V-4980 Torque Screwdriver 1
K
6V-4980 Torque Screwdriver 1
FT-2214 Adapter 1
L 8T-5096 Dial Indicator Group 1
Reference: Refer to Specifications, SENR8324, "Differential Drive and Brake Group"
.
1/15
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 1 g00824415
1. Install O-ring seal (63) in brake housing (42).
Note: If bearing cone (65) was removed, a new bearing cone must be installed.
2. Raise the temperature of bearing cone (65).
3. Install bearing cone (65) on housing (41).
4. Lower the temperature of bearing cups (62) and (64).
5. Install bearing cups (62) and (64) in brake housing (42).
Note: If bearing cone (61) was removed, a new bearing cone must be installed.
6. Raise the temperature of bearing cone (61).
7. Install bearing cone (61) in housing (41).
2/15
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 2 g01203053
8. Attach a suitable lifting device and Tooling (F) to brake housing (42).
9. Install brake housing (42) onto housing (41). The weight of brake housing (42) is approximately 77 kg (170 lb).
The weight of housing (41) is approximately 25 kg (55 lb).
Illustration 3 g01203571
10. Install plate (57) and three bolts (56).
3/15
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
30. 11. Install Tooling (K) on plate (57). Do not install the shims at this time.
12. Position brake housing (42) on suitable blocks to raise housing (41) off the floor.
13. Use Tooling (K) to rotate housing (41).
14. Use Tooling (K) to measure the bearing preload. Tighten three bolts (56) equally until the proper preload is
reached. The bearing preload should be 3 ± 1 N·m (28 ± 8 lb in).
Illustration 4 g00831700
15. When the bearing preload is correct, use a feeler gauge to measure Gap (X) between the housing and plate (57)
in three places. Average the three measurements to determine the correct shim pack thickness.
16. Remove three bolts (56) and plate (57).
17. Position correct shim pack (58) and plate (57) on the housing.
18. Install three bolts (56).
19. Tighten bolts (56) to a torque of 47 ± 9 N·m (35 ± 7 lb ft).
20. Use Tooling (K) to recheck the bearing preload.
21. Install three remaining bolts (56).
22. Tighten three remaining bolts (56) to a torque of 47 ± 9 N·m (35 ± 7 lb ft).
4/15
D6T TRACK-TYPE TRACTOR XL VPAT, XW VPAT, LGP VPAT, Differential Ste...
2021/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...