This document provides step-by-step instructions to disassemble a piston pump. It begins by removing the piston pump and cleaning it. It then details removing over 40 individual components of the pump including housing, plates, seals, springs, bearings, valves, solenoids, pins, and more. Precautions are provided for parts under spring tension. Detailed illustrations accompany each step.
This document provides disassembly and assembly instructions for a piston pump used in the hydrostatic power train of a D6K2 LGP track-type tractor. The disassembly process involves 48 steps to remove all individual components of the pump. The assembly process similarly involves assembling the components in the reverse order, noting that cleanliness is important and all parts must be thoroughly cleaned before assembly. Proper tools are required and care must be taken when compressing springs or removing components.
This document provides disassembly and assembly instructions for a piston pump used in the power train of a D6K2 LGP track-type tractor. The disassembly process involves 48 steps to remove all individual components of the pump. The assembly process similarly involves assembling the individual components in the reverse order, noting that cleanliness is important and all parts must be thoroughly cleaned before assembly.
The document provides disassembly instructions for a piston pump in 3 sentences:
It begins by having the user remove the piston pump and clean it before disassembly. Next, it lists 47 detailed steps to disassemble the various components of the pump housing, barrel assembly, valves, and control block. The document emphasizes cleanliness and safety when removing parts under spring pressure.
This document provides instructions for disassembling and assembling the transmission of a D6M track-type tractor. It lists 71 steps to fully disassemble the transmission along with illustrations. The transmission contains multiple gear assemblies, pistons, plates, discs, rings, shafts, bearings, and housings that must be removed in the correct order. Reassembly is the reverse of the disassembly process. Required tools include a transmission repair stand, link brackets, and various ring pliers and pullers.
This document provides instructions for disassembling and assembling the transmission of a D6M track-type tractor. It lists 71 steps to fully disassemble the transmission along with illustrations. The transmission contains multiple gear assemblies, pistons, plates, discs, rings, shafts, bearings, and housings that must be removed in the correct order. Reassembly is the reverse of the disassembly process. Required tools include a transmission repair stand, link brackets, and various ring pliers and pullers.
This document provides instructions for disassembling and assembling the transmission of a D6M track-type tractor. It lists 71 steps to fully disassemble the transmission along with illustrations. The transmission contains multiple gear assemblies, pistons, plates, discs, rings, shafts, bearings, and housings that must be removed in the correct order. Reassembly is the reverse of the disassembly process. Required tools include a transmission repair stand, link brackets, and various ring pliers and pullers.
This document provides instructions for disassembling and assembling the transmission of a D6M Track-Type Tractor. It lists over 70 steps for removing individual components such as gears, plates, pistons, shafts, rings, bearings, and housings. Various tools are required for tasks like compressing springs, removing snap rings, and pulling components. The assembly procedure involves cleaning parts and installing components in the reverse order of disassembly while applying oil.
Caterpillar cat 365 b l excavator (prefix 4xz) service repair manual (4xz0000...fios9dkksd
This document provides instructions for disassembling a travel motor on an excavator model 365B L EXCAVATOR. It lists 50 steps to remove parts like the brake cover, springs, brake assembly, pistons, seals, gears, and more. Tools required include pliers, a driver group, and link brackets. Cautions are provided about parts under spring pressure and ensuring fluids are contained.
This document provides disassembly and assembly instructions for a piston pump used in the hydrostatic power train of a D6K2 LGP track-type tractor. The disassembly process involves 48 steps to remove all individual components of the pump. The assembly process similarly involves assembling the components in the reverse order, noting that cleanliness is important and all parts must be thoroughly cleaned before assembly. Proper tools are required and care must be taken when compressing springs or removing components.
This document provides disassembly and assembly instructions for a piston pump used in the power train of a D6K2 LGP track-type tractor. The disassembly process involves 48 steps to remove all individual components of the pump. The assembly process similarly involves assembling the individual components in the reverse order, noting that cleanliness is important and all parts must be thoroughly cleaned before assembly.
The document provides disassembly instructions for a piston pump in 3 sentences:
It begins by having the user remove the piston pump and clean it before disassembly. Next, it lists 47 detailed steps to disassemble the various components of the pump housing, barrel assembly, valves, and control block. The document emphasizes cleanliness and safety when removing parts under spring pressure.
This document provides instructions for disassembling and assembling the transmission of a D6M track-type tractor. It lists 71 steps to fully disassemble the transmission along with illustrations. The transmission contains multiple gear assemblies, pistons, plates, discs, rings, shafts, bearings, and housings that must be removed in the correct order. Reassembly is the reverse of the disassembly process. Required tools include a transmission repair stand, link brackets, and various ring pliers and pullers.
This document provides instructions for disassembling and assembling the transmission of a D6M track-type tractor. It lists 71 steps to fully disassemble the transmission along with illustrations. The transmission contains multiple gear assemblies, pistons, plates, discs, rings, shafts, bearings, and housings that must be removed in the correct order. Reassembly is the reverse of the disassembly process. Required tools include a transmission repair stand, link brackets, and various ring pliers and pullers.
This document provides instructions for disassembling and assembling the transmission of a D6M track-type tractor. It lists 71 steps to fully disassemble the transmission along with illustrations. The transmission contains multiple gear assemblies, pistons, plates, discs, rings, shafts, bearings, and housings that must be removed in the correct order. Reassembly is the reverse of the disassembly process. Required tools include a transmission repair stand, link brackets, and various ring pliers and pullers.
This document provides instructions for disassembling and assembling the transmission of a D6M Track-Type Tractor. It lists over 70 steps for removing individual components such as gears, plates, pistons, shafts, rings, bearings, and housings. Various tools are required for tasks like compressing springs, removing snap rings, and pulling components. The assembly procedure involves cleaning parts and installing components in the reverse order of disassembly while applying oil.
Caterpillar cat 365 b l excavator (prefix 4xz) service repair manual (4xz0000...fios9dkksd
This document provides instructions for disassembling a travel motor on an excavator model 365B L EXCAVATOR. It lists 50 steps to remove parts like the brake cover, springs, brake assembly, pistons, seals, gears, and more. Tools required include pliers, a driver group, and link brackets. Cautions are provided about parts under spring pressure and ensuring fluids are contained.
Caterpillar Cat 365B L EXCAVATOR (Prefix 4XZ) Service Repair Manual Instant D...jiuliu14811471
This document provides instructions for disassembling and assembling a travel motor. It includes:
1) Over 50 steps to disassemble components like the brake cover, springs, discs, pistons, seals, and more.
2) Notes on cleaning parts and applying oil before assembly.
3) Over 45 steps to reassemble the components in reverse order, including installing seals, rings, bearings, and tightening screws.
Caterpillar Cat 365B L EXCAVATOR (Prefix 4XZ) Service Repair Manual Instant D...qianxu35543635
This document provides instructions for disassembling and assembling a travel motor. It includes:
1) Over 50 steps to disassemble components like the brake assembly, piston assemblies, barrel, and swashplate.
2) Cautions like ensuring cleanliness and applying a light film of oil to parts before assembly.
3) Over 40 assembly steps, listing required tools and showing illustrations of components like seals, rings, and pistons.
Caterpillar Cat 307B MINI HYDRAULIC EXCAVATOR (Prefix 5CW) Service Repair Man...fhjsekdmdm3e
The document provides disassembly instructions for the final drive and travel motor of a 307B Mini Hydraulic Excavator. It details removing 24 components and subassemblies including the sprocket, gear assembly, coupling, cover assembly with valves, piston from the spindle, and barrel assembly with nine pistons. Detailed steps and illustrations are provided to disassemble each component while maintaining part identification and orientation for reassembly. Required tools include pullers, pry bars, hammers, and air pressure to remove tightly fitted parts.
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...fjsekksmefm
This document provides instructions for disassembling the final drive and travel motor of a 307B Mini Hydraulic Excavator. It describes removing the sprocket, draining oil, and detaching the final drive and travel motor from the machine using lifting tools. It then provides detailed steps for disassembling components like gears, shafts, seals, valves, and other parts. Proper tools are listed and safety precautions around fluids are noted.
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...useoosekmmd
This document provides instructions for disassembling the final drive and travel motor of a 307B Mini Hydraulic Excavator. It describes removing the sprocket, draining oil, and detaching the final drive and travel motor. It then details disassembling both components by removing gears, shafts, seals, valves, and other internal parts using various tools. The goal is to fully disassemble the final drive and travel motor for inspection or repair of individual parts.
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...dfujjsefkemm
This document provides instructions for disassembling the final drive and travel motor of a 307B Mini Hydraulic Excavator. It describes removing the sprocket, draining oil, and detaching the final drive and travel motor from the machine using lifting tools. It then provides detailed steps for disassembling components like gears, shafts, seals, valves, and other parts. Proper tools are listed and safety precautions around fluids are noted.
The document suggests that if clicking the above button is invalid, the user should first download the document and then click the link to download the complete manual. It thanks the reader for their time.
The document provides instructions for disassembling and assembling the main hydraulic pump of a M315D Wheeled Excavator. It lists 34 steps for disassembly, removing components like pistons, springs, seals and bearings. It then lists 36 steps for assembly, replacing components and using tools to set specifications like the lift-off limitation. Precautions are provided to prevent contamination and release of spring forces during the process.
This document provides instructions for assembling the main hydraulic pump of an excavator model. It lists 49 steps and includes illustrations of each step. The steps include installing various parts like bearings, seals, pistons, springs, and valves. Tools needed are also listed. The summary concludes by stating to install the main hydraulic pump by referring to another section of the repair manual.
The document provides instructions for installing a swing drive on an excavator model M315D. It lists the required tools and parts. The procedure involves 28 steps, including installing bearings, seals, gears, and other components into the swing drive housing. Specific torque specifications and dimensional checks are listed to ensure proper assembly. Installation is completed by positioning the swing drive in the swing brake housing and securing it with bolts.
This document provides instructions for removing and installing a pilot control valve on a D10 track-type tractor. Key steps include:
1. Removing the right side console cover and disconnecting control rods and oil lines from the valve.
2. Removing bolts to take the valve off its mounting bracket.
3. Installing the valve by connecting oil lines and control rods and securing it with bolts back on the bracket.
This document provides instructions for disassembling and assembling the final drive of a D9R track-type tractor. It describes removing components such as the planetary carrier, gears, shafts, and hub. Various tools are required, including link brackets, a push-puller tool group, driver group, and hydraulic cylinder assembly. Precautions are given for using hydraulic cylinders and puller studs during disassembly. The multi-step process includes pressing, lifting, and removing components from the planetary carrier, sun gear, and hub.
1) The document provides instructions to disassemble and assemble the final drive of a D9R track-type tractor.
2) It describes using various tools to remove over 30 components of the final drive including gears, shafts, seals, and hubs.
3) Precautions are included when using hydraulic cylinders and heated components to disassemble pieces.
1) The document provides instructions for removing and installing the final drive planetary carrier in a D9R track-type tractor.
2) It describes using various tools to remove the carrier, hub components, seals, and gears. It also explains how to reinstall these parts in reverse order.
3) Fourteen steps are outlined for removal and thirteen steps for installation, ensuring proper alignment of parts and torquing of bolts.
The document provides instructions for disassembling and assembling the steering clutch and brake of a D7R track-type tractor. It describes 20 steps to disassemble the components and 19 steps to reassemble them. These include removing plates, seals, springs, and other parts, and replacing them in the reverse order. Tools required include link brackets and a driver group. Proper spring loading and seal installation are emphasized.
This document provides instructions for assembling and installing the final drive on a D7R track-type tractor. It describes 31 steps for assembly, including installing seals, bearings, gears, shafts and covers. For installation, it outlines 10 steps such as positioning the final drive, installing bolts, filling it with oil and reconnecting the track. The document contains diagrams to illustrate each step in the process.
Caterpillar Cat D7R II WATER FORDING TRACTOR (Prefix DJT) Service Repair Manu...ze3xiandiao
This document provides instructions for disassembling and assembling the steering planetary and brake of a D7R Series II Water Fording Tractor. It describes removing 24 components including the planetary group, brake, ring gear, friction discs, piston, and springs. Reassembly involves installing these components in reverse order, noting proper orientation and torque specifications. Tools required include link brackets, a driver group, forcing bolts, and sealant.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...ze3xiandiao
The document provides instructions for removing a final drive, steering planetary, and brake assembly from a D7R II track-type tractor. It describes using lifting brackets, shackles, bolts and nuts to attach a hoist to the assembly and remove it from the tractor. The assembly weighs approximately 800 kg (1750 lb) and precautions are listed to provide means to stop the machine without the brake installed. Fluids must be contained while working on components to collect any fluids that may drain out.
The document provides instructions for disassembling and assembling the final drives of a D7H track-type tractor. Key steps include removing the final drives from the tractor frame using specialized tools, then disassembling the internal components like planet carriers, gears, shafts, and seals. Reassembly involves heating bearings, installing seals and bearings using presses and tools, and reattaching the final drives to the frame. Precautions are noted to prevent damage to seals during axle removal and installation.
This document provides instructions for servicing the final drives on a D7H track-type tractor. It describes how to remove and disassemble the final drives, including removing the planet carriers, gears, shafts and other components. It then describes how to assemble the final drives, including installing bearings, seals, rings and other parts back into the hubs and carriers. The goal is to provide maintenance technicians with step-by-step directions for servicing these critical components.
1) The document provides instructions for removing and installing pistons, connecting rods, connecting rod bearings, and crankshaft main bearings for a Caterpillar 3306 engine.
2) The procedure involves using tools to compress piston rings, installing pistons and connecting rods onto the crankshaft, checking clearances of connecting rod bearings, and removing/installing main bearing caps.
3) Technicians are advised to keep all parts clean and lubricated with engine oil to prevent damage and wear.
The document provides instructions for removing final drive cases, gears, idler pinions and bearings from a D7G track-type tractor. The steps include:
1) Removing bolts holding the final drive case in position.
2) Installing guide bolts and forcing screws to separate the final drive case from the steering clutch case.
3) Using wire to hold the idler pinion in place so the planet carrier does not fall when the final drive case is removed.
More Related Content
Similar to Caterpillar Cat D6K2 TRACK-TYPE TRACTOR (Prefix EL7) Service Repair Manual Instant Download.pdf
Caterpillar Cat 365B L EXCAVATOR (Prefix 4XZ) Service Repair Manual Instant D...jiuliu14811471
This document provides instructions for disassembling and assembling a travel motor. It includes:
1) Over 50 steps to disassemble components like the brake cover, springs, discs, pistons, seals, and more.
2) Notes on cleaning parts and applying oil before assembly.
3) Over 45 steps to reassemble the components in reverse order, including installing seals, rings, bearings, and tightening screws.
Caterpillar Cat 365B L EXCAVATOR (Prefix 4XZ) Service Repair Manual Instant D...qianxu35543635
This document provides instructions for disassembling and assembling a travel motor. It includes:
1) Over 50 steps to disassemble components like the brake assembly, piston assemblies, barrel, and swashplate.
2) Cautions like ensuring cleanliness and applying a light film of oil to parts before assembly.
3) Over 40 assembly steps, listing required tools and showing illustrations of components like seals, rings, and pistons.
Caterpillar Cat 307B MINI HYDRAULIC EXCAVATOR (Prefix 5CW) Service Repair Man...fhjsekdmdm3e
The document provides disassembly instructions for the final drive and travel motor of a 307B Mini Hydraulic Excavator. It details removing 24 components and subassemblies including the sprocket, gear assembly, coupling, cover assembly with valves, piston from the spindle, and barrel assembly with nine pistons. Detailed steps and illustrations are provided to disassemble each component while maintaining part identification and orientation for reassembly. Required tools include pullers, pry bars, hammers, and air pressure to remove tightly fitted parts.
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...fjsekksmefm
This document provides instructions for disassembling the final drive and travel motor of a 307B Mini Hydraulic Excavator. It describes removing the sprocket, draining oil, and detaching the final drive and travel motor from the machine using lifting tools. It then provides detailed steps for disassembling components like gears, shafts, seals, valves, and other parts. Proper tools are listed and safety precautions around fluids are noted.
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...useoosekmmd
This document provides instructions for disassembling the final drive and travel motor of a 307B Mini Hydraulic Excavator. It describes removing the sprocket, draining oil, and detaching the final drive and travel motor. It then details disassembling both components by removing gears, shafts, seals, valves, and other internal parts using various tools. The goal is to fully disassemble the final drive and travel motor for inspection or repair of individual parts.
Caterpillar cat 307 b mini hydraulic excavator (prefix 5cw) service repair ma...dfujjsefkemm
This document provides instructions for disassembling the final drive and travel motor of a 307B Mini Hydraulic Excavator. It describes removing the sprocket, draining oil, and detaching the final drive and travel motor from the machine using lifting tools. It then provides detailed steps for disassembling components like gears, shafts, seals, valves, and other parts. Proper tools are listed and safety precautions around fluids are noted.
Similar to Caterpillar Cat D6K2 TRACK-TYPE TRACTOR (Prefix EL7) Service Repair Manual Instant Download.pdf (6)
The document suggests that if clicking the above button is invalid, the user should first download the document and then click the link to download the complete manual. It thanks the reader for their time.
The document provides instructions for disassembling and assembling the main hydraulic pump of a M315D Wheeled Excavator. It lists 34 steps for disassembly, removing components like pistons, springs, seals and bearings. It then lists 36 steps for assembly, replacing components and using tools to set specifications like the lift-off limitation. Precautions are provided to prevent contamination and release of spring forces during the process.
This document provides instructions for assembling the main hydraulic pump of an excavator model. It lists 49 steps and includes illustrations of each step. The steps include installing various parts like bearings, seals, pistons, springs, and valves. Tools needed are also listed. The summary concludes by stating to install the main hydraulic pump by referring to another section of the repair manual.
The document provides instructions for installing a swing drive on an excavator model M315D. It lists the required tools and parts. The procedure involves 28 steps, including installing bearings, seals, gears, and other components into the swing drive housing. Specific torque specifications and dimensional checks are listed to ensure proper assembly. Installation is completed by positioning the swing drive in the swing brake housing and securing it with bolts.
This document provides instructions for removing and installing a pilot control valve on a D10 track-type tractor. Key steps include:
1. Removing the right side console cover and disconnecting control rods and oil lines from the valve.
2. Removing bolts to take the valve off its mounting bracket.
3. Installing the valve by connecting oil lines and control rods and securing it with bolts back on the bracket.
This document provides instructions for disassembling and assembling the final drive of a D9R track-type tractor. It describes removing components such as the planetary carrier, gears, shafts, and hub. Various tools are required, including link brackets, a push-puller tool group, driver group, and hydraulic cylinder assembly. Precautions are given for using hydraulic cylinders and puller studs during disassembly. The multi-step process includes pressing, lifting, and removing components from the planetary carrier, sun gear, and hub.
1) The document provides instructions to disassemble and assemble the final drive of a D9R track-type tractor.
2) It describes using various tools to remove over 30 components of the final drive including gears, shafts, seals, and hubs.
3) Precautions are included when using hydraulic cylinders and heated components to disassemble pieces.
1) The document provides instructions for removing and installing the final drive planetary carrier in a D9R track-type tractor.
2) It describes using various tools to remove the carrier, hub components, seals, and gears. It also explains how to reinstall these parts in reverse order.
3) Fourteen steps are outlined for removal and thirteen steps for installation, ensuring proper alignment of parts and torquing of bolts.
The document provides instructions for disassembling and assembling the steering clutch and brake of a D7R track-type tractor. It describes 20 steps to disassemble the components and 19 steps to reassemble them. These include removing plates, seals, springs, and other parts, and replacing them in the reverse order. Tools required include link brackets and a driver group. Proper spring loading and seal installation are emphasized.
This document provides instructions for assembling and installing the final drive on a D7R track-type tractor. It describes 31 steps for assembly, including installing seals, bearings, gears, shafts and covers. For installation, it outlines 10 steps such as positioning the final drive, installing bolts, filling it with oil and reconnecting the track. The document contains diagrams to illustrate each step in the process.
Caterpillar Cat D7R II WATER FORDING TRACTOR (Prefix DJT) Service Repair Manu...ze3xiandiao
This document provides instructions for disassembling and assembling the steering planetary and brake of a D7R Series II Water Fording Tractor. It describes removing 24 components including the planetary group, brake, ring gear, friction discs, piston, and springs. Reassembly involves installing these components in reverse order, noting proper orientation and torque specifications. Tools required include link brackets, a driver group, forcing bolts, and sealant.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...ze3xiandiao
The document provides instructions for removing a final drive, steering planetary, and brake assembly from a D7R II track-type tractor. It describes using lifting brackets, shackles, bolts and nuts to attach a hoist to the assembly and remove it from the tractor. The assembly weighs approximately 800 kg (1750 lb) and precautions are listed to provide means to stop the machine without the brake installed. Fluids must be contained while working on components to collect any fluids that may drain out.
The document provides instructions for disassembling and assembling the final drives of a D7H track-type tractor. Key steps include removing the final drives from the tractor frame using specialized tools, then disassembling the internal components like planet carriers, gears, shafts, and seals. Reassembly involves heating bearings, installing seals and bearings using presses and tools, and reattaching the final drives to the frame. Precautions are noted to prevent damage to seals during axle removal and installation.
This document provides instructions for servicing the final drives on a D7H track-type tractor. It describes how to remove and disassemble the final drives, including removing the planet carriers, gears, shafts and other components. It then describes how to assemble the final drives, including installing bearings, seals, rings and other parts back into the hubs and carriers. The goal is to provide maintenance technicians with step-by-step directions for servicing these critical components.
1) The document provides instructions for removing and installing pistons, connecting rods, connecting rod bearings, and crankshaft main bearings for a Caterpillar 3306 engine.
2) The procedure involves using tools to compress piston rings, installing pistons and connecting rods onto the crankshaft, checking clearances of connecting rod bearings, and removing/installing main bearing caps.
3) Technicians are advised to keep all parts clean and lubricated with engine oil to prevent damage and wear.
The document provides instructions for removing final drive cases, gears, idler pinions and bearings from a D7G track-type tractor. The steps include:
1) Removing bolts holding the final drive case in position.
2) Installing guide bolts and forcing screws to separate the final drive case from the steering clutch case.
3) Using wire to hold the idler pinion in place so the planet carrier does not fall when the final drive case is removed.
The document provides step-by-step instructions for removing and installing sprocket assemblies on a final drive case. It involves draining the oil, removing the sprocket and various components using specialized tools, cleaning seals and surfaces, and installing the new sprocket along with bearings, seals, and other parts in reverse order. Precise measurements and torque specifications are listed to ensure proper installation.
The document provides instructions for removing and installing sprocket assemblies on a direct drive final drive. The key steps include:
1. Draining the oil and removing the sprocket, holder assembly, seals, bearings and other components.
2. Cleaning surfaces and installing new seals before pressing the sprocket onto the hub using a hydraulic press.
3. Reassembling the holder assembly by installing bearings, seals, and adjusting nut then attaching it to the sprocket shaft.
This document provides instructions for removing and installing the engine in a D7F track-type tractor model 94N. The removal process involves draining fluids, disconnecting wiring harnesses and fluid lines, and removing mounting hardware. The engine can then be lifted out of the tractor body. Installation is the reverse of removal, reconnecting all fluid lines, wiring, and securing the engine with mounting hardware. Proper lubrication and adjustment of components is also specified.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. The components include the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. Detailed steps are provided for each component, including preparatory steps, individual installation and removal steps, and concluding steps.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
1. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6K2 TRACK-TYPE TRACTOR EL7
Configuration: D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED BY C4.4 ENGINE
Disassembly and Assembly
D6K Track Type Tractor Power Train
Media Number -M0066522-04 Publication Date -01/07/2018 Date Updated -25/07/2018
i06830154
Piston Pump (Hydrostatic) - Disassemble
SMCS - 3203-015; 4306-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
437-3776 Fixture As. 1
1U-9129(1)
Adapter Plate 1
1U-5750 Engine Stand 1
B FT-1409 Spacer 4
C 422-5472 Lifting Eye Assembly 2
D 1P-0510 Driver Gp 1
E 136-1452 Retaining Ring Pliers As 1
F 8H-0663 Bearing Puller Gp 1
G 1U-7600 Slide Hammer Puller Gp 1
(1)
Part of the Hydraulic Test Bench Tooling.
Start By:
a. Remove the piston pump.
Note: Cleanliness is an important factor. Before the disassembly procedure, clean the exterior of
the component.
1/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. Illustration 1 g06133100
Illustration 2 g06133092
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Use Tooling (B) to secure the piston pump to Tooling (A) or a suitable fixture.
2. Attach Tooling (C) and a suitable lifting device to pump housing (1). Remove bolts (2) and
pump housing (1).
2/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 3 g06133924
3. Remove port plate (3) from pump housing (1).
Illustration 4 g06133926
4. Remove O-ring seal (5). Use nylon string to remove rotating assembly (4).
3/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 5 g06133950
5. Remove piston assemblies (6) and retainer plate (7) from barrel assembly (8).
Illustration 6 g06133954
6. Remove ball joint (9) from barrel assembly (8).
Illustration 7 g06134090
7. Remove shim (10) and spring assembly (11) from barrel assembly (8).
Illustration 8 g06134094
4/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 9 g06134096
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Use Tooling (D) and a suitable press to compress spring (14). Remove retaining ring (12).
9. Remove washers (13) and spring (14) from barrel assembly (8).
Illustration 10 g06134099
Note: Note the orientation of slide (16) for assembly purposes.
10. Remove swashplate assembly (15).
5/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 11 g06134102
11. Remove slide (16) and bearing assemblies (17) from swashplate assembly (15).
Illustration 12 g06134104
12. Remove bearing liners (18).
Illustration 13 g06134105
13. Use Tooling (E) to remove retaining ring (19) from front mounting flange (21).
14. Use Tooling (G) to remove lip seal (20) from front mounting flange (21).
6/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 14 g06134136
15. Use Tooling (E) to remove retaining ring (22) from front mounting flange (21).
Illustration 15 g06134179
16. Use a suitable press to remove shaft (23) from front mounting flange (21).
Illustration 16 g06134180
17. Remove retaining ring (24). Use Tooling (F) and a suitable press to remove bearing (25)
from shaft (23).
7/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 17 g06134183
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
18. Reattach pump housing (1) to Tooling (A) with rear mounting flange assembly (27) facing
down.
19. Remove bolts (26). Use a suitable lifting device to remove pump housing (1) from rear
mounting flange assembly (27).
8/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 18 g06134236
20. Remove port plate (28) from pump housing (1).
Illustration 19 g06134249
21. Remove O-ring seal (30). Use a nylon string to remove rotating assembly (29).
Illustration 20 g06134254
22. Remove piston assemblies (31) and retainer plate (32) from barrel assembly (33).
Illustration 21 g06134258
9/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
25. Use Tooling (D) and a suitable press to compress spring (39). Remove retaining ring (37).
26. Remove washers (38) and spring (39) from barrel assembly (33).
Illustration 25 g06134276
Note: Note the orientation of slide (41) for assembly purposes.
27. Remove swashplate assembly (40).
Illustration 26 g06134480
28. Remove bearing liners (42).
11/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 27 g06134580
29. Remove bolts (44) and rear mounting flange (43) from rear mounting flange assembly (27).
30. Remove plate (45) and the O-ring seal.
Illustration 28 g06134589
31. Remove plate (46) and O-ring seal (48) from rear mounting flange assembly (27). Use
Tooling (E) to remove retaining ring (47).
Illustration 29 g06134598
12/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 32. Use a suitable press to remove shaft assembly (49) from rear mounting flange assembly
(27).
Illustration 30 g06134633
33. Remove retaining ring (50). Use Tooling (F) and a suitable press to remove bearing (50)
from shaft assembly (49).
Illustration 31 g06134643
34. Remove plugs (51) and the O-ring seals from pump housing (1).
Illustration 32 g06135182
13/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 35. Remove valve assemblies (55). Remove bolts (52), cap (53), and O-ring seal (54) from the
pump housing. Repeat for the opposite side.
Illustration 33 g06134898
36. Remove O-ring seal (56) from valve assembly (55). Repeat for other valves.
Illustration 34 g06134900
37. Remove solenoid assemblies (57) from pump housing (1).
Illustration 35 g06134903
14/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 38. Remove nuts (58), O-ring seals (59), coil assemblies (60), cartridges (61), and O-ring seals
(62).
Illustration 36 g06134909
Illustration 37 g06134912
39. Remove plugs (63) and the O-ring seals. Remove bolts (65), cover (66), and valve group
(64) from the pump housing. Remove gasket (67). Repeat for the opposite side.
Illustration 38 g06134925
40. Remove nuts (68), O-ring seals (69), coil assemblies (70), cartridges (71), and O-ring seals
(72) from control block (64).
15/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 39 g06134931
41. Remove bolt (73), retainer (74), and eccentric pin (75) from control block (64).
Illustration 40 g06134936
42. Remove O-ring seal (76) and spring (77) from eccentric pin (75).
16/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 41 g06134940
43. Remove levers (78), spring (79), washer (80), reaction arm (81), and spool (82) from control
block (64). Repeat for opposite side.
Illustration 42 g06135001
Illustration 43 g06134994
44. Remove nut (84) and bolts (83) from cover (85).
45. Use a soft faced hammer to tap adjustment screw (86) from the back side of the pump
housing until the O-ring seal on cover (85) clears the pump housing.
46. Unscrew cover (86) from adjustment screw (86).
Note: Count the number of revolutions required for removal for installation purposes.
47. Remove control piston (86) from pump housing (1). Repeat for opposite side.
17/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 44 g06135008
48. Remove ring (87) and guide ring (88) from pump housing (1).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Aug 31 08:13:26 UTC+0800 2021
18/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6K2 TRACK-TYPE TRACTOR EL7
Configuration: D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED BY C4.4 ENGINE
Disassembly and Assembly
D6K Track Type Tractor Power Train
Media Number -M0066522-04 Publication Date -01/07/2018 Date Updated -25/07/2018
i06830157
Piston Pump (Hydrostatic) - Assemble
SMCS - 3203-016; 4306-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
437-3776 Fixture As. 1
1U-9129(1)
Adapter Plate 1
1U-5750 Engine Stand 1
B FT-1409 Spacer 4
C 422-5472 Lifting Eye Assembly 2
D 1P-0510 Driver Gp 1
E 136-1452 Retaining Ring Pliers As 1
F 8H-0663 Bearing Puller Gp 1
G 1U-7600 Slide Hammer Puller Gp 1
H 6V-2055 Grease 1
(1)
Part of the Hydraulic Test Bench Tooling.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning
fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be
deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or
damaged, use new parts for replacement. Dirt and other contaminants can damage the precision
component. Perform assembly procedures on a clean work surface. Always keep components
covered and protected .
1/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the
components, if necessary.
Illustration 1 g06135231
1. Install guide ring (88) and ring (87) into pump housing (1). Repeat for the opposite side.
Illustration 2 g06135233
Illustration 3 g06135235
2. Install control piston (87) into pump housing (1).
2/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 3. Install the O-ring seal and cover (85) onto adjustment screw (86).
Note: Install cover (85) to a depth of 22 revolutions if original depth is unknown.
4. Install bolts (83) onto cover (85). Tighten bolts (83) to a torque of 130 ± 13 N·m
(95 ± 10 lb ft).
5. Install nut (84) onto adjustment screw (86). Tighten nut (84) to a torque of 180 ± 18 N·m
(133 ± 13 lb ft). Repeat for opposite side.
Illustration 4 g06134940
6. Install spool (82), reaction arm (81), washer (80), spring (79), and levers (78) into control
block (64). Repeat for opposite side.
Illustration 5 g06134936
7. Install spring (77) and O-ring seal (78) onto eccentric pin (75).
3/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 6 g06134931
8. Install eccentric pin (75), retainer (74), and bolt (73) into control block (64).
Illustration 7 g06134925
9. Install O-ring seals (72), cartridges (71), coil assemblies (70), O-ring seals (69), and nuts
(68) from control block (64).
4/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 8 g06134912
Illustration 9 g06134909
10. Install gasket (67). Install valve group (64), cover (66), bolts (65), plugs (63), and the O-ring
seals onto the pump housing. Tighten bolts (65) to a torque of 15.5 ± 2 N·m
(137 ± 18 lb in). Repeat for the opposite side.
Illustration 10 g06134903
11. Install O-ring seals (62), cartridges (61), coil assemblies (60), O-ring seals (59), and nuts
(58).
Illustration 11 g06134900
5/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. 12. Install solenoid assemblies (57) into pump housing (1).
Illustration 12 g06134898
13. Install O-ring seal (56) onto valve assembly (55). Repeat for other valves.
Illustration 13 g06135182
14. Install O-ring seal (54), cap (53), and bolts (52) into the pump housing. Tighten bolts (52) to
a torque of 130 ± 13 N·m (96 ± 10 lb ft). Install valves (55). Tighten valves (55) to a torque
of 250 N·m (184 lb ft). Repeat for the opposite side.
Illustration 14 g06134643
6/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 15. Install plugs (51) and the O-ring seals into pump housing (1).
Illustration 15 g06135459
Illustration 16 g06135455
16. Use Tooling (F) and a suitable press to install bearing (51) onto shaft assembly (49). Install
retaining ring (50) onto shaft assembly (49).
Illustration 17 g06136089
17. Use a suitable press to install shaft assembly (49) into rear mounting flange assembly (27).
Use Tooling (E) to install retaining ring (47). Install plate (46) and O-ring seal (48) into rear
mounting flange assembly (27).
7/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 18 g06134580
18. Install plate (45) and the O-ring seal.
19. Position rear mounting flange (43) onto rear mounting flange (27). Install bolts (44).
Illustration 19 g06134480
20. Install bearing liners (42).
Illustration 20 g06134276
21. Install swashplate assembly (40). Use Tooling (H) to hold slide (41) in the upright position.
8/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 21 g06134268
Illustration 22 g06134265
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
22. Install spring (39) and washers (38) into barrel assembly (33).
23. Use Tooling (D) and a suitable press to compress spring (39). Install retaining ring (37).
9/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERED ...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
30. Illustration 26 g06135808
27. Attach rear mounting flange (27) to Tooling (A). Use a nylon string to install rotating
assembly (29). Install O-ring seal (30).
Illustration 27 g06134236
28. Use Tooling (H) to hold port plate (28) in place. Install port plate (28) into pump housing
(1).
11/18
D6K2 LGP, XL TRACK-TYPE TRACTOR EL700001-UP (MACHINE) POWERE...
2021/8/31
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...