This document provides assembly instructions for an alternator and turbocharger. It describes in detail the 29 steps to assemble the alternator, including pressing components, installing screws and diodes, and connecting wires. It also describes removing and installing the turbocharger, which involves removing and installing lines, clamps, exhaust components, and a 4-bolt flange. Finally, it provides instructions to disassemble and reassemble the turbocharger, including removing and installing bearings, seals, wheels, and housings. Cleanliness is emphasized throughout and specific tools are referenced.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, caps, and housing pieces. Cleanliness is emphasized throughout assembly and notes provide warnings about not damaging delicate parts like diodes, bearings, and windings.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease between parts. The document also provides disassembly instructions for an air cleaner housing, installing a turbocharger, and disassembling a turbocharger.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease between parts. The document also provides disassembly instructions for an air cleaner housing, installing a turbocharger, and disassembling a turbocharger.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease to protected parts. The document also provides disassembly instructions for an air cleaner housing and removing/installing a turbocharger.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, caps, and housing pieces. Cleanliness is emphasized throughout assembly and notes provide warnings about not damaging delicate parts like diodes, bearings, and windings.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease between parts. The document also provides disassembly instructions for an air cleaner housing, installing a turbocharger, and disassembling a turbocharger.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease between parts. The document also provides disassembly instructions for an air cleaner housing, installing a turbocharger, and disassembling a turbocharger.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease to protected parts. The document also provides disassembly instructions for an air cleaner housing and removing/installing a turbocharger.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized throughout assembly and notes provide warnings about damaging parts during pressing or striking.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease to protected parts. The document also provides disassembly instructions for an air cleaner housing and removing/installing a turbocharger.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease to protected parts. The document also provides disassembly instructions for an air cleaner housing and removing/installing a turbocharger.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be applied where noted. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be reapplied if removed. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together. It instructs to install diodes, coils, housing pieces and leads. For the turbocharger, it outlines 14 steps to disassemble it by removing housings, wheels and seals. It then lists 15 steps for reassembling the turbocharger, including installing new seals, bearings and ensuring oil passages are clean.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together. It instructs to install diodes, coils, housings and ends by connecting wires. It also outlines 14 steps to disassemble a turbocharger, including removing housings, wheels and seals, and 13 steps to reassemble it, such as installing bearings, seals and housings. Proper cleaning and lubrication of parts is emphasized throughout.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be reapplied if removed. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together. It instructs to install diodes, coils, housing pieces and connects wires. It also outlines 14 steps to disassemble a turbocharger, including removing housings, wheels and seals. Reassembly involves installing new seals, bearings and pressing components back together in the correct orientation. Proper cleaning and lubrication of parts is emphasized throughout.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be reapplied if removed. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together, and ending by connecting wires and installing covers. It also provides 5 steps to remove an air cleaner housing and 4 steps to install it. Finally, it lists 14 steps to disassemble a turbocharger, such as removing housings and wheels, and 13 steps to reassemble it, including installing bearings and seals. Cleanliness is emphasized throughout assembly.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together, and ending by connecting wires and installing covers. It also describes removing and installing an air cleaner housing in 5 steps each. Finally, it lists 14 steps to disassemble a turbocharger, such as removing the compressor wheel and turbine shroud, and 13 steps to reassemble it, including installing bearings and seals. Cleanliness is emphasized throughout assembly.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be reapplied if removed. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides assembly instructions for an alternator and turbocharger. It describes in detail the 29 steps to assemble the alternator, including pressing components together and connecting wires. It also describes removing and installing the turbocharger and air cleaner housing, as well as the 15 steps to disassemble and 13 steps to reassemble the turbocharger, noting the use of marks and grease during assembly.
This document provides assembly instructions for an alternator and turbocharger. It includes 29 steps to assemble the alternator, ensuring cleanliness and proper installation of components like diodes, coils, housings and terminals. It also details 15 steps to disassemble and 13 steps to reassemble a turbocharger, including marking parts for alignment and applying anti-seize compound to bolts during installation. Cleanliness and correct orientation of parts like bearings and seals are emphasized.
This document provides assembly instructions for an alternator and turbocharger. It includes 29 steps to assemble the alternator, ensuring cleanliness and proper installation of components like diodes, coils, housings and terminals. It also details 15 steps to disassemble and 13 steps to reassemble a turbocharger, including installation of bearings, seals, wheels and housings. Proper positioning and torque values are emphasized throughout.
This document provides assembly and disassembly instructions for servicing an alternator and turbocharger on a Caterpillar 963 track loader. It describes in detail the 29 steps to assemble the alternator, including pressing components together and installing screws, bolts and wires in the proper order. It also outlines removing and installing the air cleaner housing and turbocharger, noting parts like gaskets, lines, elbows and clamps. Disassembly of the turbocharger is described as removing housing components and using positioning tools.
Komatsu WA470-3 Wheel Loader Service Repair Manual (WA470-3 Serial WA470H2005...zhan96lun
This document provides specifications, dimensions, weights, and other technical details for Komatsu wheel loaders. It includes specifications for machines up to a certain serial number, including dimensions and weights, performance data, and lists of recommended lubricants and fluids. It also provides an overview of service procedures and diagrams of vehicle controls and gauges.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfzhan96lun
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine and their specifications.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized and notes provide warnings about handling delicate parts carefully to avoid damage.
This document provides assembly instructions for an alternator. It describes 29 steps to assemble the various components of the alternator in the proper order, including installing diodes, bearings, coils, housing pieces, terminals and making electrical connections. Cleanliness is emphasized throughout assembly and notes provide warnings about damaging parts during pressing or striking.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease to protected parts. The document also provides disassembly instructions for an air cleaner housing and removing/installing a turbocharger.
This document provides instructions for assembling an alternator. It describes in detail each step of the assembly process with notes about proper handling of parts. Some key steps include pressing bearings and bushings into place without striking them, joining housing components, connecting wiring harnesses, and applying dielectric grease to protected parts. The document also provides disassembly instructions for an air cleaner housing and removing/installing a turbocharger.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be applied where noted. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be reapplied if removed. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together. It instructs to install diodes, coils, housing pieces and leads. For the turbocharger, it outlines 14 steps to disassemble it by removing housings, wheels and seals. It then lists 15 steps for reassembling the turbocharger, including installing new seals, bearings and ensuring oil passages are clean.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together. It instructs to install diodes, coils, housings and ends by connecting wires. It also outlines 14 steps to disassemble a turbocharger, including removing housings, wheels and seals, and 13 steps to reassemble it, such as installing bearings, seals and housings. Proper cleaning and lubrication of parts is emphasized throughout.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be reapplied if removed. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together. It instructs to install diodes, coils, housing pieces and connects wires. It also outlines 14 steps to disassemble a turbocharger, including removing housings, wheels and seals. Reassembly involves installing new seals, bearings and pressing components back together in the correct orientation. Proper cleaning and lubrication of parts is emphasized throughout.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be reapplied if removed. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together, and ending by connecting wires and installing covers. It also provides 5 steps to remove an air cleaner housing and 4 steps to install it. Finally, it lists 14 steps to disassemble a turbocharger, such as removing housings and wheels, and 13 steps to reassemble it, including installing bearings and seals. Cleanliness is emphasized throughout assembly.
This document provides assembly instructions for an alternator and turbocharger. It consists of 30 steps to assemble the alternator, beginning with cleaning parts and pressing components together, and ending by connecting wires and installing covers. It also describes removing and installing an air cleaner housing in 5 steps each. Finally, it lists 14 steps to disassemble a turbocharger, such as removing the compressor wheel and turbine shroud, and 13 steps to reassemble it, including installing bearings and seals. Cleanliness is emphasized throughout assembly.
This document provides instructions for assembling an alternator. It describes 29 steps to assemble internal components like diodes, bushings, coils, and housings. Cleanliness is important during assembly to avoid issues. Diodes and bearings should not be struck as it can damage them. Dielectric grease should be reapplied if removed. The final steps include installing external components like the mounting plate, regulator, and cover.
This document provides assembly instructions for an alternator and turbocharger. It describes in detail the 29 steps to assemble the alternator, including pressing components together and connecting wires. It also describes removing and installing the turbocharger and air cleaner housing, as well as the 15 steps to disassemble and 13 steps to reassemble the turbocharger, noting the use of marks and grease during assembly.
This document provides assembly instructions for an alternator and turbocharger. It includes 29 steps to assemble the alternator, ensuring cleanliness and proper installation of components like diodes, coils, housings and terminals. It also details 15 steps to disassemble and 13 steps to reassemble a turbocharger, including marking parts for alignment and applying anti-seize compound to bolts during installation. Cleanliness and correct orientation of parts like bearings and seals are emphasized.
This document provides assembly instructions for an alternator and turbocharger. It includes 29 steps to assemble the alternator, ensuring cleanliness and proper installation of components like diodes, coils, housings and terminals. It also details 15 steps to disassemble and 13 steps to reassemble a turbocharger, including installation of bearings, seals, wheels and housings. Proper positioning and torque values are emphasized throughout.
This document provides assembly and disassembly instructions for servicing an alternator and turbocharger on a Caterpillar 963 track loader. It describes in detail the 29 steps to assemble the alternator, including pressing components together and installing screws, bolts and wires in the proper order. It also outlines removing and installing the air cleaner housing and turbocharger, noting parts like gaskets, lines, elbows and clamps. Disassembly of the turbocharger is described as removing housing components and using positioning tools.
Similar to Caterpillar Cat 963 TRACK LOADER (Prefix 48Z) Service Repair Manual (48Z00232 and up).pdf (18)
Komatsu WA470-3 Wheel Loader Service Repair Manual (WA470-3 Serial WA470H2005...zhan96lun
This document provides specifications, dimensions, weights, and other technical details for Komatsu wheel loaders. It includes specifications for machines up to a certain serial number, including dimensions and weights, performance data, and lists of recommended lubricants and fluids. It also provides an overview of service procedures and diagrams of vehicle controls and gauges.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfzhan96lun
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine and their specifications.
Komatsu HM400-2 Articulated Dump Truck Parts Catalogue Manual - SN A11001 AND...zhan96lun
This document provides part descriptions and numbers for engine components of the HM400-2 excavator from serial number A11001 and up. It includes sections for the cylinder head, rocker lever housing, rocker lever lever assembly, and rocker lever shaft assembly. Each section lists the relevant parts, descriptions, and quantities.
Komatsu HM400-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for an HM400-1L excavator with serial number range A10001-UP. It includes a list of major systems and components with reference page numbers. An example parts list is then provided for the engine mounting system with part numbers, descriptions, and other specifications.
Komatsu HM350-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for the engine and related systems of an HM350-1L machine with serial number A10001 or higher. It includes sections covering the engine mounting, hoses, air intake and exhaust piping, air cleaner components, and electrical harness. Lists of part numbers, descriptions, and quantities are provided for each system.
Komatsu HM350-1 Articulated Dump Truck Parts Catalogue Manual - SN 1001 AND U...zhan96lun
This document provides parts information for an HM350-1 excavator with serial numbers 1001 and up. It includes a list of major systems and subsystems for the excavator. For each part listed, it provides the part number, name, quantity, and applicable serial number range. The document contains detailed parts listings for various engine and cooling system components.
Komatsu HM300-3 Articulated Dump Truck Parts Catalogue Manual - SN 3001 AND U...zhan96lun
This document provides parts information for an HM300-3 excavator with serial numbers 3001 and up. It includes sections for the engine, cooling system, fuel system, electrical system, and other components. The cooling system section lists units for the radiator, aftercooler, coolant piping, brake oil cooler, and brake oil cooler piping. Parts are identified by index number, part number, description, and quantity for each component. The document provides detailed exploded diagrams and parts lists for replacement parts.
Komatsu HM300-2 Articulated Dump Truck Parts Catalogue Manual - SN 2001-2784.pdfzhan96lun
This document contains parts lists and specifications for various engine and drivetrain components of an HM300-2 excavator with serial number 2001-2784. It includes 17 sections with details on the engine mounting, hoses, piping, air conditioning parts, damper, and other related systems. The document provides part numbers, names, quantities and serial number ranges for each component listed.
Komatsu HM300-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for an HM300-1L machine with serial number range A10001-UP. It includes a list of major system sections and references to additional documents for some component level part listings. Parts are identified by part number, description, and quantity.
Komatsu D155C-1 Pipe Layer Parts Catalogue Manual - SN 15686 AND UP.pdfzhan96lun
This document provides parts information for a D155C-1 excavator with a SA6D140-2 engine installed. It includes lists of parts for the engine and its related systems, including the cooling system, fuel tank and piping, and electrical system. The parts are organized by section and item number, and each part includes its number, name, quantity, and applicable serial number range.
Deutz Fahr AGROTRON 265 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and lifting heavy components safely. The document also describes how the manual is structured, with different sections covering mechanical systems, electrical systems, and removal/refitting procedures. Techniques for consulting the manual are provided, such as following the specific precautions for part removal and installation.
Deutz Fahr AGROTRON 235 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and disconnecting battery terminals before working on electrical systems. It also describes how the manual is structured and how to consult it, noting removal and refitting procedures, safety precautions, lists of special tools, and proper tightening torques.
Deutz Fahr AGROTRON 210 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and disconnecting battery terminals before working on electrical systems. It also describes how to safely remove and refit parts using lifting equipment, following torque specifications, and taking precautions for hydraulic and electrical systems. The manual is structured with separate sections covering mechanical systems, electrical systems, external components, and technical specifications without engine or transmission details.
Deutz Fahr AGROFARM 100 Tractor Service Repair Manual.pdfzhan96lun
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Deutz Fahr AGROFARM 85 Tractor Service Repair Manual.pdfzhan96lun
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 963 TRACK LOADER 48Z
Configuration: 963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
26SI Series Alternator
Media Number -RENR1252-01 Publication Date -01/10/1999 Date Updated -09/10/2001
i01167078
Alternator - Assemble
SMCS - 1405-016
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Note: Do not strike the diodes. The shock of such an impact can damage the diodes. Use
proper tools in order to press the diodes in the mountings.
Illustration 1 g00628072
1. Install 3 diodes (11) in heat sink (12) .
1/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 2 g00628068
Note: Do not strike the bushing. Shocks from striking the housing can cause damage.
2. Press bushing (43) in housing (14) .
3. Install 3 diodes (13) in housing (14) .
Illustration 3 g00628067
4. Press collar (42) on rotor (39) .
5. Slide retainer (41) on rotor (39) .
6. Press bearing (40) on rotor (39) .
2/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00628063
7. Press housing (31) on rotor (39) and bearing (40) .
8. Install 4 screws (38) in housing (31) .
Illustration 5 g00628057
Note: Do not strike the bearing. Shocks from striking the housing can cause damage.
9. Install the inner race. Press bearing (37) into the housing.
3/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g00628043
10. Press cap (36) in housing (14) .
Illustration 7 g00628041
11. Install the coil and support (34) in housing (14). Guide the field leads and the grommet
through the hole as the coil is installed in housing (14). Install 3 screws (33) .
Illustration 8 g00628037
12. Press the stator (32) and housing (14) together. Guide the stator leads and the grommet
through the hole as the stator is installed in housing (14) .
4/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 9 g00628035
Note: Do not damage exposed stator windings or field windings. Bumping the windings or
scraping the windings may break the insulation. Broken insulation may create a short circuit
or a ground.
13. Join housing (31) and housing (14). Install 4 bolts (30) .
Illustration 10 g00627853
Note: Many of the alternator's internal components are covered with dielectric grease. If the
grease is removed, reapply the grease.
5/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 11 g00627855
14. Install Insulator (29). Install the heat sink and diode assembly (12) in housing (14) .
Illustration 12 g00627840
15. Install separator (28) .
16. Install alternator output terminal (27). Install insulator (26). Install the nut and washer (25) .
17. Install diode trio (24) and install screw (23) .
6/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 13 g00627832
18. Install the 3 screws and insulators (18). Connect wire (19) .
19. If the "R" terminal is used, install the following components: nut (20), lead (21), the washer
and terminal (21) .
Illustration 14 g00627820
20. Install the screw and insulator (16). Connect capacitor lead (17) .
Illustration 15 g00627810
Note: The 3 output diodes (11) are located in heat sink (12). These diodes are identical in
polarity. Diode (11) has red insulation on the wire. The 3 ground diodes (13) are located in
housing (14). These diodes are identical in polarity. Diode (13) has black insulation on the
wire.
21. Connect 6 diode leads. Connect 3 phase leads. Connect 3 stator phase leads. Install 3 nuts
(15).
Table 1
7/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Alternator
Ground
Current Flow of the Output
Diodes
Current Flow of the Ground
Diodes
Negative
Lead to the Heat Sink Housing to the Lead
Red Wire Black Wire
Illustration 16 g00627808
22. Install mounting plate (10).
Illustration 17 g00627804
23. Install regulator (9) .
24. Install grounded mounting screw (8) .
8/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 18 g00627796
25. Install 2 insulated screws (6). Connect the 3 leads.
Note: The regulator and the mounting plate are coated with dielectric grease. If the grease is
removed, reapply the grease.
26. Install nut (7) and connect the wire.
Illustration 19 g00627794
27. Install gasket (5) .
9/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 20 g00627792
28. Position cover (4). Install 7 screws (3) .
Illustration 21 g00627790
29. Position plate (2). Install 4 screws (1) .
30. Install the fan, the pulley, the washer, and the pulley nut.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 16 11:41:58 UTC+0800 2019
10/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 E...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 963 TRACK LOADER 48Z
Configuration: 963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
963 TRACK-TYPE LOADER
Media Number -SENR2284-00 Publication Date -01/07/1981 Date Updated -11/10/2001
Air Cleaner Housing
SMCS - 1051-11; 1051-12
Remove Air Cleaner Housing
1. Remove cover (1) from the air cleaner housing.
2. Remove primary filter element (2).
3. Remove eight bolts (3) and secondary filter element (4) from the filter housing.
1/3
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 4. Loosen clamp (5) on the rubber air line to the air cleaner.
5. Remove two nuts (6) and air cleaner housing (7).
Install Air Cleaner Housing
1. Put the gasket and air cleaner housing (2) in position on the air inlet pipe and install the nuts
that hold it in place.
2. Put rubber air line (1) from the precleaner in position on the air cleaner housing and tighten the
clamp to hold it in place.
3. Put secondary filter element (3) in position in the air cleaner housing and install the eight bolts
that hold it in place.
2/3
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 4. Install primary filter element (4).
5. Install the cover on the air cleaner housing and tighten clamp bolts (5) finger tight only. Do not
use a tool to tighten the clamp bolts.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 16 11:44:46 UTC+0800 2019
3/3
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 963 TRACK LOADER 48Z
Configuration: 963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
963 TRACK-TYPE LOADER
Media Number -SENR2284-00 Publication Date -01/07/1981 Date Updated -11/10/2001
Turbocharger
SMCS - 1052-11; 1052-12; 1052-15; 1052-16
Remove Turbocharger
1. Remove turbocharger oil inlet line (1) and outlet line (2).
2. Remove the bolts that hold exhaust elbow (3) to the exhaust manifold and move the exhaust
elbow and coupling (4) clear of the turbocharger.
3. Loosen clamp (5) on the turbocharger air outlet and clamp (6) on the turbocharger air inlet.
1/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 4. Remove four bolts (7). Remove turbocharger (8) from the exhaust manifold and air lines.
Install Turbocharger
1. Install a new gasket (1) if necessary.
2. Put the turbocharger in position on the exhaust manifold and air lines. Put 5P3931 Anti-Seize
Compound on the threads of the bolts that hold the turbocharger to the exhaust manifold. Tighten
the bolts to the standard torque.
3. Put the clamps in position on air lines (2) and tighten them.
4. Put coupling (3) and exhaust elbow (4) in position on the turbocharger and exhaust manifold. Put
5P3931 Anti-Seize Compound on the threads of the bolts that hold the exhaust elbow to the exhaust
manifold. Tighten the bolts to the standard torque.
2/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 5. Install the gaskets and turbocharger oil outlet line (5) and oil inlet line (6).
Disassemble Turbocharger
start by:
a) remove turbocharger
1. Put the turbocharger in position tool (A).
2. Put a mark on compressor housing (1) and the backplate assembly for use at assembly. Remove
the compressor housing from the backplate assembly.
3. Change the position of tool (A) so the compressor wheel is up as shown.
4. Put a mark on housing (2) and turbine housing (3) so that the housing can be put back in the same
position in the turbine housing at assembly.
3/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 5. Remove the bolts, lockplates and clamps that hold the housing in the turbine housing and remove
the housing.
6. Put the housing in position on tool (B).
7. Use tool (C) and a socket of the correct size to remove nut (5) from the shaft.
NOTICE
Do not put a side force on the shaft when the nut is removed.
8. Remove compressor wheel (4) from the shaft.
9. Remove the housing from the shaft.
10. Remove shroud (6) from the turbine wheel and shaft.
11. Remove seal ring (7) from the turbine wheel.
12. Put a mark on the housing and backplate assembly for use at assembly. Remove the bolts and
plates that hold the housing to the backplate assembly. Remove the housing.
4/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 13. Remove bearing (8), collar (9) and the seal ring from backplate assembly (10).
14. Remove the seal ring and bearing from the collar.
15. Remove seal ring (11) from the housing.
16. Remove the snap ring, bearing (12) and the snap ring from each side of the housing.
Assemble Turbocharger
1. Make sure all oil passages are clean and free of all dirt or foreign material. Put clean engine oil on
all of the parts before assembly.
2. Install the inner snap ring, bearing (1) and snap ring (2) in each side of the housing.
NOTE: The snap rings must be installed with the round side toward the bearing.
5/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 3. Install the seal ring on collar (4).
4. Put bearing (3) in position on the collar.
NOTICE
The oil grooves in the bearing must be clean and free of all dirt or
foreign material. The bearing must be installed with the oil grooves
toward the housing.
5. Put the bearing and collar in position on the housing so the oil grooves in the bearing are toward
the housing and the holes in the bearing are in alignment with the pins in the housing.
NOTICE
Be extra careful during installation of the bearing and collar not to
cause damage to the seal ring on the collar.
6. Install the seal ring on the housing.
7. Put the backplate assembly in position on the housing respective to the marks put on the housing
and backplate at disassembly. Install the plates and bolts. Tighten the bolts to a torque of 8.5 - 10.2
N·m (75 - 90 lb.in.).
8. Install shroud (5) on the housing.
6/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 9. Put 6V2055 High Vacuum Grease in the groove for seal ring (7). Make sure the grease fills the
groove approximately one half or more of the groove depth for the complete circumference of the
groove to help make a carbon dam under the seal. Install seal ring (7). Carefully install turbine
wheel and shaft (6) in the housing.
10. Put the housing, turbine wheel and shaft and the backplate assembly in position on tool (A).
11. Install compressor wheel (8) on the turbine shaft.
12. Put clean engine oil on the threads of the shaft. Install the nut that holds the compressor wheel in
place. Tighten the nut with tool (D) to a torque of 2.3 N·m (20 lb.in.). Put a mark on the nut and
shaft. Tighten the nut 100° more.
NOTICE
When the nut is tightened, do not put a side force on the shaft.
7/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. 13. If the turbine housing was removed from tool (B), put the turbine housing in position on tool
(B).
14. Put the housing and wheels in position in the turbine housing respective to the marks put on the
housings at disassembly.
15. Put 5P3931 Anti-Seize Compound on the threads of bolts (9). Install the clamps, lockplates and
the bolts (9). Tighten the bolts to a torque of 13 ± 1.7 N·m (115 ± 15 lb.in.). Bend the lockplates
against the bolt heads.
16. Put compressor housing (10) in position on the backplate assembly respective to the marks put
on the housing and backplate assembly at disassembly.
17. Install the clamps, lockplates and bolts that hold the compressor housing in place. Tighten the
bolts to a torque of 13 ± 1.7 N·m (115 ± 15 lb.in.). Bend the lockplates against the bolt heads.
18. Remove the turbocharger from tool (B).
NOTE: If new components have been installed at assembly and the correct position for the turbine
housing or compressor housing is not known, put the housings in their correct position with the
9S9143 Gauge Group. A line through the center of the openings in the turbine housing and
compressor housing must be at the angle shown. See SPECIAL INSTRUCTIONS FORM
GMG00579.
end by:
a) install turbocharger
8/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. 9/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 16 11:45:36 UTC+0800 2019
10/10
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 E...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 963 TRACK LOADER 48Z
Configuration: 963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
963 TRACK-TYPE LOADER
Media Number -SENR2284-00 Publication Date -01/07/1981 Date Updated -11/10/2001
Muffler And Hood
SMCS - 1062; 7251-11; 7251-12
Remove Muffler And Hood
1. Loosen clamp (1) and disconnect the exhaust pipe from the muffler.
2. Remove the bolts that hold muffler (2) to the hood and remove the muffler.
3. Remove precleaner (3).
1/3
963 TRACK TYPE LOADER 48Z00232-UP (MACHINE) POWERED BY 3304 EN...
2019/9/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...