Komatsu WA470-3 Wheel Loader Service Repair Manual (WA470-3 Serial WA470H2005...zhan96lun
This document provides specifications, dimensions, weights, and other technical details for Komatsu wheel loaders. It includes specifications for machines up to a certain serial number, including dimensions and weights, performance data, and lists of recommended lubricants and fluids. It also provides an overview of service procedures and diagrams of vehicle controls and gauges.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfzhan96lun
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine and their specifications.
Komatsu HM400-2 Articulated Dump Truck Parts Catalogue Manual - SN A11001 AND...zhan96lun
This document provides part descriptions and numbers for engine components of the HM400-2 excavator from serial number A11001 and up. It includes sections for the cylinder head, rocker lever housing, rocker lever lever assembly, and rocker lever shaft assembly. Each section lists the relevant parts, descriptions, and quantities.
Komatsu HM400-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for an HM400-1L excavator with serial number range A10001-UP. It includes a list of major systems and components with reference page numbers. An example parts list is then provided for the engine mounting system with part numbers, descriptions, and other specifications.
Komatsu HM350-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for the engine and related systems of an HM350-1L machine with serial number A10001 or higher. It includes sections covering the engine mounting, hoses, air intake and exhaust piping, air cleaner components, and electrical harness. Lists of part numbers, descriptions, and quantities are provided for each system.
Komatsu WA470-3 Wheel Loader Service Repair Manual (WA470-3 Serial WA470H2005...zhan96lun
This document provides specifications, dimensions, weights, and other technical details for Komatsu wheel loaders. It includes specifications for machines up to a certain serial number, including dimensions and weights, performance data, and lists of recommended lubricants and fluids. It also provides an overview of service procedures and diagrams of vehicle controls and gauges.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfzhan96lun
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, power, torque, and fuel consumption.
- Operating weights, bucket capacity, travel speeds, and other performance specs.
- Hydraulic system components and specifications.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the machine and their specifications.
Komatsu HM400-2 Articulated Dump Truck Parts Catalogue Manual - SN A11001 AND...zhan96lun
This document provides part descriptions and numbers for engine components of the HM400-2 excavator from serial number A11001 and up. It includes sections for the cylinder head, rocker lever housing, rocker lever lever assembly, and rocker lever shaft assembly. Each section lists the relevant parts, descriptions, and quantities.
Komatsu HM400-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for an HM400-1L excavator with serial number range A10001-UP. It includes a list of major systems and components with reference page numbers. An example parts list is then provided for the engine mounting system with part numbers, descriptions, and other specifications.
Komatsu HM350-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for the engine and related systems of an HM350-1L machine with serial number A10001 or higher. It includes sections covering the engine mounting, hoses, air intake and exhaust piping, air cleaner components, and electrical harness. Lists of part numbers, descriptions, and quantities are provided for each system.
Komatsu HM350-1 Articulated Dump Truck Parts Catalogue Manual - SN 1001 AND U...zhan96lun
This document provides parts information for an HM350-1 excavator with serial numbers 1001 and up. It includes a list of major systems and subsystems for the excavator. For each part listed, it provides the part number, name, quantity, and applicable serial number range. The document contains detailed parts listings for various engine and cooling system components.
Komatsu HM300-3 Articulated Dump Truck Parts Catalogue Manual - SN 3001 AND U...zhan96lun
This document provides parts information for an HM300-3 excavator with serial numbers 3001 and up. It includes sections for the engine, cooling system, fuel system, electrical system, and other components. The cooling system section lists units for the radiator, aftercooler, coolant piping, brake oil cooler, and brake oil cooler piping. Parts are identified by index number, part number, description, and quantity for each component. The document provides detailed exploded diagrams and parts lists for replacement parts.
Komatsu HM300-2 Articulated Dump Truck Parts Catalogue Manual - SN 2001-2784.pdfzhan96lun
This document contains parts lists and specifications for various engine and drivetrain components of an HM300-2 excavator with serial number 2001-2784. It includes 17 sections with details on the engine mounting, hoses, piping, air conditioning parts, damper, and other related systems. The document provides part numbers, names, quantities and serial number ranges for each component listed.
Komatsu HM300-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for an HM300-1L machine with serial number range A10001-UP. It includes a list of major system sections and references to additional documents for some component level part listings. Parts are identified by part number, description, and quantity.
Komatsu D155C-1 Pipe Layer Parts Catalogue Manual - SN 15686 AND UP.pdfzhan96lun
This document provides parts information for a D155C-1 excavator with a SA6D140-2 engine installed. It includes lists of parts for the engine and its related systems, including the cooling system, fuel tank and piping, and electrical system. The parts are organized by section and item number, and each part includes its number, name, quantity, and applicable serial number range.
Deutz Fahr AGROTRON 265 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and lifting heavy components safely. The document also describes how the manual is structured, with different sections covering mechanical systems, electrical systems, and removal/refitting procedures. Techniques for consulting the manual are provided, such as following the specific precautions for part removal and installation.
Deutz Fahr AGROTRON 235 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and disconnecting battery terminals before working on electrical systems. It also describes how the manual is structured and how to consult it, noting removal and refitting procedures, safety precautions, lists of special tools, and proper tightening torques.
Deutz Fahr AGROTRON 210 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and disconnecting battery terminals before working on electrical systems. It also describes how to safely remove and refit parts using lifting equipment, following torque specifications, and taking precautions for hydraulic and electrical systems. The manual is structured with separate sections covering mechanical systems, electrical systems, external components, and technical specifications without engine or transmission details.
Deutz Fahr AGROFARM 100 Tractor Service Repair Manual.pdfzhan96lun
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Deutz Fahr AGROFARM 85 Tractor Service Repair Manual.pdfzhan96lun
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Caterpillar Cat EL300B EXCAVATOR (Prefix 3FJ) Service Repair Manual (3FJ00001...zhan96lun
The document provides instructions for assembling a fuel injection pump housing. It includes:
1) Installing bearings in both ends of the housing and ensuring proper positioning and clearance.
2) Installing the camshaft and securing it with a washer and snap ring.
3) Installing lifters and a fuel rack after assembling the governor.
The document provides instructions for removing and installing fuel system components on a Caterpillar 3306 engine. It describes removing the fuel priming pump by disconnecting hoses and removing mounting bolts. It also details removing the fuel filter base by disconnecting fuel lines and removing mounting bolts. Finally, it explains removing the fuel transfer pump by disconnecting hoses and removing mounting bolts. Safety notices are provided to keep parts clean and contain fluids during repair work.
Caterpillar Cat EL240C EXCAVATOR (Prefix 9PK) Service Repair Manual (9PK00001...zhan96lun
This document provides instructions for removing and installing inlet manifold, inlet and exhaust valves, and inlet and exhaust valve guides on a Caterpillar 3116 engine. The removal and installation procedures include disconnecting linkages, removing mounting bolts, installing new gaskets, and tightening fasteners to specified torques. Special tools are required for some steps, and precautions are listed to prevent contamination and contain fluids.
This document provides instructions for removing and installing the front cover on an excavator engine. The removal procedure involves removing bolts from the front cover and removing the cover and gasket from the front of the engine. The installation procedure specifies cleaning parts and installing a new gasket on the front cover before positioning the cover on the engine and installing the bolts.
This document provides instructions for removing and installing the fuel transfer pump on an excavator. The removal procedure involves holding a spring-loaded cover in place and removing bolts to release the spring. Components like the filter screen, spring, piston and seals are then removed from the pump. The installation procedure is not described but presumably involves reversing the removal steps. Maintaining cleanliness of parts is emphasized to prevent contamination.
Caterpillar Cat E70 EXCAVATOR (Prefix 3BG) Service Repair Manual (3BG00001-UP...zhan96lun
This document provides instructions for installing Duo-Cone seals correctly to reduce leaks or failures. It describes the components of a Duo-Cone seal and the assembly process. Critical items include inspecting the seal ring, rubber toric, and housing for damage or contamination before assembly and handling all components carefully to avoid scratches or contamination. The seal ring face must be free of scratches that could impair the sealing function. Cleaning and lubrication methods are also specified.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump on a Caterpillar D5B track-type tractor with a 3306 engine. The procedures describe draining fuel, removing bolts and connections, installing new seals and gaskets, and reconnecting fuel lines and tubes. Technicians are advised to keep parts clean and contain fluids during maintenance.
Caterpillar Cat D4E TRACK-TYPE TRACTOR (Prefix 77W) Service Repair Manual.pdfzhan96lun
This document provides instructions for disassembling and assembling an alternator on a Caterpillar D4E track-type tractor. The 11-step disassembly process removes components like the regulator, capacitor, pulley, fan, screws, rotor, bearings, slip ring, rectifier, and stator. The 9-step assembly process cleans and inspects parts before reinstalling components in reverse order, taking care to align marks and apply specified torques. A second document provides 2-step instructions for removing and installing the fuel priming pump from the cylinder block of a 3304B or 3306B engine on a Caterpillar-built machine.
Caterpillar Cat D4E TRACK TRACTOR Service Repair Manual (77W01664 and UP).pdfzhan96lun
This document provides instructions for removing and installing an alternator, fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar D4E track-type tractor with a 3304 engine. The alternator disassembly procedure involves removing components like the pulley, fan, bearings, and stator. The assembly procedure describes cleaning and reinstalling these parts. Instructions are also given for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump, which involve disconnecting fuel lines and removing mounting bolts.
Komatsu HM350-1 Articulated Dump Truck Parts Catalogue Manual - SN 1001 AND U...zhan96lun
This document provides parts information for an HM350-1 excavator with serial numbers 1001 and up. It includes a list of major systems and subsystems for the excavator. For each part listed, it provides the part number, name, quantity, and applicable serial number range. The document contains detailed parts listings for various engine and cooling system components.
Komatsu HM300-3 Articulated Dump Truck Parts Catalogue Manual - SN 3001 AND U...zhan96lun
This document provides parts information for an HM300-3 excavator with serial numbers 3001 and up. It includes sections for the engine, cooling system, fuel system, electrical system, and other components. The cooling system section lists units for the radiator, aftercooler, coolant piping, brake oil cooler, and brake oil cooler piping. Parts are identified by index number, part number, description, and quantity for each component. The document provides detailed exploded diagrams and parts lists for replacement parts.
Komatsu HM300-2 Articulated Dump Truck Parts Catalogue Manual - SN 2001-2784.pdfzhan96lun
This document contains parts lists and specifications for various engine and drivetrain components of an HM300-2 excavator with serial number 2001-2784. It includes 17 sections with details on the engine mounting, hoses, piping, air conditioning parts, damper, and other related systems. The document provides part numbers, names, quantities and serial number ranges for each component listed.
Komatsu HM300-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...zhan96lun
This document provides parts information for an HM300-1L machine with serial number range A10001-UP. It includes a list of major system sections and references to additional documents for some component level part listings. Parts are identified by part number, description, and quantity.
Komatsu D155C-1 Pipe Layer Parts Catalogue Manual - SN 15686 AND UP.pdfzhan96lun
This document provides parts information for a D155C-1 excavator with a SA6D140-2 engine installed. It includes lists of parts for the engine and its related systems, including the cooling system, fuel tank and piping, and electrical system. The parts are organized by section and item number, and each part includes its number, name, quantity, and applicable serial number range.
Deutz Fahr AGROTRON 265 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and lifting heavy components safely. The document also describes how the manual is structured, with different sections covering mechanical systems, electrical systems, and removal/refitting procedures. Techniques for consulting the manual are provided, such as following the specific precautions for part removal and installation.
Deutz Fahr AGROTRON 235 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and disconnecting battery terminals before working on electrical systems. It also describes how the manual is structured and how to consult it, noting removal and refitting procedures, safety precautions, lists of special tools, and proper tightening torques.
Deutz Fahr AGROTRON 210 Tractor Service Repair Manual.pdfzhan96lun
This document provides safety guidelines and instructions for workshop manuals on Agrotron tractors. It outlines general safety rules for working on machines, including ensuring proper ventilation, wearing protective equipment, and disconnecting battery terminals before working on electrical systems. It also describes how to safely remove and refit parts using lifting equipment, following torque specifications, and taking precautions for hydraulic and electrical systems. The manual is structured with separate sections covering mechanical systems, electrical systems, external components, and technical specifications without engine or transmission details.
Deutz Fahr AGROFARM 100 Tractor Service Repair Manual.pdfzhan96lun
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Deutz Fahr AGROFARM 85 Tractor Service Repair Manual.pdfzhan96lun
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Caterpillar Cat EL300B EXCAVATOR (Prefix 3FJ) Service Repair Manual (3FJ00001...zhan96lun
The document provides instructions for assembling a fuel injection pump housing. It includes:
1) Installing bearings in both ends of the housing and ensuring proper positioning and clearance.
2) Installing the camshaft and securing it with a washer and snap ring.
3) Installing lifters and a fuel rack after assembling the governor.
The document provides instructions for removing and installing fuel system components on a Caterpillar 3306 engine. It describes removing the fuel priming pump by disconnecting hoses and removing mounting bolts. It also details removing the fuel filter base by disconnecting fuel lines and removing mounting bolts. Finally, it explains removing the fuel transfer pump by disconnecting hoses and removing mounting bolts. Safety notices are provided to keep parts clean and contain fluids during repair work.
Caterpillar Cat EL240C EXCAVATOR (Prefix 9PK) Service Repair Manual (9PK00001...zhan96lun
This document provides instructions for removing and installing inlet manifold, inlet and exhaust valves, and inlet and exhaust valve guides on a Caterpillar 3116 engine. The removal and installation procedures include disconnecting linkages, removing mounting bolts, installing new gaskets, and tightening fasteners to specified torques. Special tools are required for some steps, and precautions are listed to prevent contamination and contain fluids.
This document provides instructions for removing and installing the front cover on an excavator engine. The removal procedure involves removing bolts from the front cover and removing the cover and gasket from the front of the engine. The installation procedure specifies cleaning parts and installing a new gasket on the front cover before positioning the cover on the engine and installing the bolts.
This document provides instructions for removing and installing the fuel transfer pump on an excavator. The removal procedure involves holding a spring-loaded cover in place and removing bolts to release the spring. Components like the filter screen, spring, piston and seals are then removed from the pump. The installation procedure is not described but presumably involves reversing the removal steps. Maintaining cleanliness of parts is emphasized to prevent contamination.
Caterpillar Cat E70 EXCAVATOR (Prefix 3BG) Service Repair Manual (3BG00001-UP...zhan96lun
This document provides instructions for installing Duo-Cone seals correctly to reduce leaks or failures. It describes the components of a Duo-Cone seal and the assembly process. Critical items include inspecting the seal ring, rubber toric, and housing for damage or contamination before assembly and handling all components carefully to avoid scratches or contamination. The seal ring face must be free of scratches that could impair the sealing function. Cleaning and lubrication methods are also specified.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump on a Caterpillar D5B track-type tractor with a 3306 engine. The procedures describe draining fuel, removing bolts and connections, installing new seals and gaskets, and reconnecting fuel lines and tubes. Technicians are advised to keep parts clean and contain fluids during maintenance.
Caterpillar Cat D4E TRACK-TYPE TRACTOR (Prefix 77W) Service Repair Manual.pdfzhan96lun
This document provides instructions for disassembling and assembling an alternator on a Caterpillar D4E track-type tractor. The 11-step disassembly process removes components like the regulator, capacitor, pulley, fan, screws, rotor, bearings, slip ring, rectifier, and stator. The 9-step assembly process cleans and inspects parts before reinstalling components in reverse order, taking care to align marks and apply specified torques. A second document provides 2-step instructions for removing and installing the fuel priming pump from the cylinder block of a 3304B or 3306B engine on a Caterpillar-built machine.
Caterpillar Cat D4E TRACK TRACTOR Service Repair Manual (77W01664 and UP).pdfzhan96lun
This document provides instructions for removing and installing an alternator, fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar D4E track-type tractor with a 3304 engine. The alternator disassembly procedure involves removing components like the pulley, fan, bearings, and stator. The assembly procedure describes cleaning and reinstalling these parts. Instructions are also given for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump, which involve disconnecting fuel lines and removing mounting bolts.
Caterpillar Cat D4E TRACK TRACTOR Service Repair Manual (77W01664 and UP).pdf
Komatsu HM400-2 Articulated Dump Truck Parts Catalogue Manual - SN 2001-2632.pdf
1. HM400-2 S/N 2001-2632 (ecot3)
HM400-2 S/N 2001-2632 (ecot3)
Reference: Page:|000000
Item Part Name
SAA6D140E-5C-01 S/N 530001-UP
B0 ENGINE RELATED PARTS
C0 COOLING SYSTEM
D0 FUEL TANK AND RELATED PARTS
E0 ELECTRICAL SYSTEM
F0 POWER TRAIN
H0 HYDRAULIC SYSTEM
J0 MAIN FRAME AND RELATED PARTS
K0 OPERATOR'S COMPARTMENT AND CONTROL SYSTEM
M0 GUARD
S0 RIM AND TIRE
T0 BODY
U0 MARKS AND PLATES
V0 TOOL
W0 MISCELLANEOUS
Y0 SERVICE KIT AND COMPONENT PARTS
2. HM400-2 S/N 2001-2632 (ecot3)
ENGINE RELATED PARTS
Reference: Page:030000
Item Part Name Qty
10 ENGINE MOUNTING(#2001-) 1
20 ENGINE HOSE(#2001-) 1
30 ENGINE PIPING (EXHAUST)(#2001-) 1
40 ENGINE PIPING (AIR INTAKE)(#2001-) 1
50 AIR CONDITIONER AND HEATER (HEATER PIPING)(#2001-) 1
60 AIR CONDITIONER AND HEATER (AIR COMPRESSOR AND RELATED PARTS)(#2001-2411) 1
70 AIR CONDITIONER AND HEATER (AIR COMPRESSOR AND RELATED PARTS)(#2412-) 1
80 DAMPER(#2001-) 1
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. HM400-2 S/N 2001-2632 (ecot3)
FUEL TANK AND RELATED PARTS
Reference: Page:090000
Item Part Name Qty
10 FUEL TANK AND RELATED PARTS(#2001-) 1
20 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS)(#2001-2594) 1
30 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS)(#2595-) 1
40 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS) (FOR QUICK CHARGE)(#2001-2594) 1
50 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS) (FOR QUICK CHARGE)(#2595-) 1
60 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS) (SAND PROTECTION SPEC.)(#2001-2594) 1
70 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS) (SAND PROTECTION SPEC.)(#2595-) 1
80 FUEL TANK SUB ASS'Y (AIR CLEANER AND PIPING)(#2001-) 1
90 FUEL TANK SUB ASS'Y (AIR CLEANER AND PIPING) (FOR QUICK CHARGE)(#2001-) 1
100 FUEL TANK SUB ASS'Y (AIR CLEANER AND PIPING) (FOR QUICK CHARGE) (TROPICAL SPEC.)(#2001-) 1
110 FUEL TANK SUB ASS'Y (AIR CLEANER AND PIPING) (TROPICAL SPEC.)(#2001-) 1
120 FUEL TANK SUB ASS'Y (QUICK CHARGE RELATED PARTS)(#2001-) 1
130 FUEL TANK SUB ASS'Y (HAND RAIL AND BOX)(#2001-) 1
140 AIR CLEANER (INNER PARTS)(#2001-) 1
150 FUEL LINE(#2001-) 1
160 FUEL TANK BREATHER(#2001-) 1