This document provides instructions for disassembling and assembling components of the retarder and bearing cage (drive shaft) of a 623G wheel tractor. The disassembly procedure involves using various tools to remove 15 different components. The assembly procedure instructs installing the components in reverse order and refers to other documents for installing related components. Safety notices are provided regarding containing fluids and preventing contamination.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
What Exactly Is The Common Rail Direct Injection System & How Does It Work
Caterpillar Cat 623G Wheel Tractor (Prefix DBC) Service Repair Manual (DBC00001 and up).pdf
1. Shutdown SIS
Previous Screen
Product: WHEEL TRACTOR
Model: 623G WHEEL TRACTOR DBC
Configuration: 623G Wheel Tractor DBC00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
621G and 623G
Wheel Tractor-Scrapers
Power Train
Media Number -RENR7497-00 Publication Date -01/08/2005 Date Updated -04/08/2005
i02330950
Retarder and Bearing Cage (Drive Shaft) - Disassemble
SMCS - 3120-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B
1P-0510 Driver Gp 1
8B-7551 Bearing Puller Gp 1
C
8B-7551 Bearing Puller Gp 1
8B-7548 Push-Puller Tool Gp 1
3H-0465 Push-Puller Plate 4
5F-7353 Washer 1
8B-7550 Push-Puller Leg 2
126-7176 Forcing Screw 1
D - Forcing Bolts1/2 - 13 NC by 3 inch 2
E 1P-0510 Driver Gp 1
1/7(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
2. Illustration 1 g01049519
1. Remove bolts (3) and retainer (4). Remove bolts (2) from stator (1) .
Illustration 2 g01049520
2. Install Tooling (A) and a suitable lifting device to stator (1). Remove stator (1) from
housing (5). The weight of stator (1) is approximately 23 kg (50 lb).
Illustration 3 g01049526
2/7(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. 3. Remove bolts (6) and spider (7) .
Illustration 4 g01049534
Illustration 5 g01049535
4. Remove deflector (10) from spider (7). Use Tooling (B) and a suitable press to remove
bearing (9). Remove retainer (8) .
3/7(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. Illustration 6 g01049538
5. Install Tooling (A) and a suitable lifting device to rotor (12). Remove rotor (12) and shaft
(11) from housing (5) .
Illustration 7 g01049539
6. Remove rings (13) and rings (14) from both sides of the rotor.
Illustration 8 g01049541
7. Use Tooling (C) to remove carriers (15) from both sides of rotor (12) .
4/7(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. Illustration 9 g01049542
8. Remove gear (16) from shaft (11) .
Illustration 10 g01049543
9. Remove bolts (17) .
Illustration 11 g01049544
10. Use Tooling (D) in order to remove cover (18) from housing (5) .
5/7(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Illustration 12 g01049546
11. Remove nut (19), retainer (20), and gear (21) .
Illustration 13 g01049547
Illustration 14 g01049548
12. Remove O-ring seal (22), washer (23), washer (25), and shaft (26) from gear (21) .
6/7(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. 13. Use Tooling (E) and a suitable press to remove bearing (24) from gear (21) .
Illustration 15 g01049549
14. Remove O-ring seal (27), bearing (28), and seal (29) from cover (18) .
Illustration 16 g01049550
15. Remove plugs (30), (31), and (32) from housing (5) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 10 18:44:37 UTC+0800 2021
7/7(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. Shutdown SIS
Previous Screen
Product: WHEEL TRACTOR
Model: 623G WHEEL TRACTOR DBC
Configuration: 623G Wheel Tractor DBC00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
621G and 623G
Wheel Tractor-Scrapers
Power Train
Media Number -RENR7497-00 Publication Date -01/08/2005 Date Updated -04/08/2005
i02042129
Retarder and Bearing Cage (Drive Shaft) - Assemble
SMCS - 3120-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
E 1P-0510 Driver Gp 1
Illustration 1 g01049550
1. Install plugs (30), (31), and (32) into housing (5) .
1/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Illustration 2 g01049549
2. Install seal (29) and bearing (28) into cover (18). Install O-ring seal (27) onto cover (18) .
Illustration 3 g01049547
2/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Illustration 4 g01049548
3. Use Tooling (E) and a suitable press to install bearing (24) into gear (21) .
4. Install washer (25), shaft (26), washer (23), and O-ring seal (22) into gear (21) .
Illustration 5 g01049546
5. Install gear (21), retainer (20), and nut (19) .
Illustration 6 g01049663
3/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. 6. Install cover (18) and bolts (17) onto housing (5) .
Illustration 7 g01049542
7. Install gear (16) onto shaft (11) .
Illustration 8 g01049666
8. Install carriers (15) (not shown) onto both sides of rotor (12). Install rings (13) and rings
(14) onto both sides of rotor (12) .
4/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. Illustration 9 g01049538
9. Install shaft (11) into housing (5) .
10. Install Tooling (A) and a suitable lifting device to rotor (12). Install rotor (12) onto housing
(5) .
Illustration 10 g01049535
11. Install retainer (8) onto spider (7). Use Tooling (E) and a suitable press to install bearing (9).
Install deflector (10) onto spider (7) .
5/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. Illustration 11 g01049526
12. Install spider (7) and bolts (6) .
Illustration 12 g01049520
13. Install Tooling (A) and a suitable lifting device to stator (1). Install stator (1) onto housing
(5). The weight of stator (1) is approximately 23 kg (50 lb).
Illustration 13 g01049519
14. Install bolts (2) into stator (1). Tighten bolts (2) to a torque of 50 ± 7 N·m (37 ± 5 lb ft).
Install retainer (4) and bolts (3) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 10 18:45:32 UTC+0800 2021
6/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. Shutdown SIS
Previous Screen
Product: WHEEL TRACTOR
Model: 623G WHEEL TRACTOR DBC
Configuration: 623G Wheel Tractor DBC00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
621G and 623G
Wheel Tractor-Scrapers
Power Train
Media Number -RENR7497-00 Publication Date -01/08/2005 Date Updated -04/08/2005
i02042131
Retarder and Bearing Cage (Drive Shaft) - Install
SMCS - 3120-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2D-1201 Eyebolt 1
B 140-7742 Sleeve 1
NOTICE
Keep all parts clean from contaminants.
Contamination of the hydraulic system with foreign material will
reduce the service life of the hydraulic system components.
To prevent contaminants from entering the hydraulic system, always
plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.
Clean the hydraulic system properly after any major component
exchange or especially after a component failure, to remove any
contamination.
1/3(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. 1. Clean all parts and inspect all parts. If any parts are worn or damaged, use new parts for
replacement.
Illustration 1 g01049725
Illustration 2 g01049810
2. Install Tooling (A) into retarder (2). Use Tooling (B) in order to protect the lifting strap
from other components of the machine. The weight of retarder (2) is approximately 109 kg
(240 lb).
3. Position retarder (2) and install bolts (7) .
4. Connect hose assembly (3) .
2/3(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. Illustration 3 g01049726
5. Install tube assembly (4). Install hose (6) and tighten clamps (5) .
Illustration 4 g01049724
6. Connect hose assembly (1) .
End By:
a. Install the retarder hydraulic control valve. Refer to Disassembly and Assembly, "Retarder
Hydraulic Control Valve - Install".
b. Install the flywheel scavenge pump. Refer to Disassembly and Assembly, "Flywheel
Scavenge Pump - Install".
c. Install the drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and
Install".
d. Install the secondary steering pump. Refer to Disassembly and Assembly, "Secondary
Steering Pump - Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 10 18:46:28 UTC+0800 2021
3/3(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Shutdown SIS
Previous Screen
Product: WHEEL TRACTOR
Model: 623G WHEEL TRACTOR DBC
Configuration: 623G Wheel Tractor DBC00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
621G and 623G
Wheel Tractor-Scrapers
Power Train
Media Number -RENR7497-00 Publication Date -01/08/2005 Date Updated -04/08/2005
i02301147
Bearing Cage (Drive Shaft) - Remove
SMCS - 3267-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2D-1201 Eyebolt 1
B 140-7742 Sleeve 1
C Forcing Bolt7/16 - 14 NC by 3.5 inch 2
ZZ
6V-9832 Cap As 2
6V-9511 Plug 2
Start By:
A. Remove the secondary steering pump. Refer to Disassembly and Assembly, "Secondary
Steering Pump - Remove".
B. Remove the drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and
Install".
C. Remove the flywheel scavenge pump. Refer to Disassembly and Assembly, "Flywheel
Scavenge Pump - Remove".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN
PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS
SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
1/4(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. At operating temperature, the hydraulic oil is hot and under pressure.
Hot oils can cause burns.
To prevent possible personal injury, release the pressure in the work
tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits,
and the hydraulic oil tank at the filler cap before any hydraulic lines or
components are disconnected or removed.
Remove the filler cap only when the engine is stopped and the filler cap
is cool enough to touch.
NOTICE
Keep all parts clean from contaminants.
Contamination of the hydraulic system with foreign material will
reduce the service life of the hydraulic system components.
To prevent contaminants from entering the hydraulic system, always
plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.
Clean the hydraulic system properly after any major component
exchange or especially after a component failure, to remove any
contamination.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
2/4(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Illustration 1 g01050146
1. Disconnect hose assembly (1) .
Illustration 2 g01050143
2. Install Tooling (A) into retarder housing (2). Use Tooling (B) in order to protect the lifting
strap from other components of the machine. The weight of retarder housing (2) is
approximately 109 kg (240 lb).
3. Disconnect hose assembly (3) .
3/4(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Illustration 3 g01050144
4. Loosen clamps (5) and remove hose (6). Remove tube assembly (4). Use a suitable
container to catch fluid leakage.
Illustration 4 g01050145
5. Remove bolts (7). Use Tooling (C) and remove retarder housing (2). The weight of retarder
housing (2) is approximately 109 kg (240 lb).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 10 18:47:24 UTC+0800 2021
4/4(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. Shutdown SIS
Previous Screen
Product: WHEEL TRACTOR
Model: 623G WHEEL TRACTOR DBC
Configuration: 623G Wheel Tractor DBC00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
621G and 623G
Wheel Tractor-Scrapers
Power Train
Media Number -RENR7497-00 Publication Date -01/08/2005 Date Updated -04/08/2005
i02301148
Bearing Cage (Drive Shaft) - Disassemble
SMCS - 3267-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A Forcing Bolts1/2 - 13 NC by 3 inch 2
B 1P-0520 Driver Gp 1
C 1P-0510 Driver Gp 1
D 8B-7551 Bearing Puller Gp 1
Start By:
A. Remove the bearing cage. Refer to Disassembly and Assembly, "Bearing Cage (Drive
Shaft) - Remove".
1/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. Illustration 1 g01049201
1. Remove bolts (1) and retainer (2) .
2/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. Illustration 2 g01049202
2. Remove bolts (3). Use Tooling (A) in order to remove cover (4) .
3/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
24. Illustration 3 g01049203
3. Remove spacer (9), gear (8), bearing (7), and shaft (6) from cover (4). Use Tooling (B) to
remove seal (5) .
4. Remove nut (10), retainer (11), bolt (17), seal (16), thrust washer (15), gear (14), and
bearing (13). Use Tooling (C) to remove thrust washer (12) .
4/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
25. Illustration 4 g01049204
5. Remove bolts (20), spider (19), and deflector (18) .
Illustration 5 g01049206
6. Use Tooling (C), Tooling (D), and a suitable press to remove bearing (21) and retainer (22)
from spider (19) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Sat Apr 10 18:48:19 UTC+0800 2021
5/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
26. Private Network For SIS Licensees.
6/6(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
27. Shutdown SIS
Previous Screen
Product: WHEEL TRACTOR
Model: 623G WHEEL TRACTOR DBC
Configuration: 623G Wheel Tractor DBC00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
621G and 623G
Wheel Tractor-Scrapers
Power Train
Media Number -RENR7497-00 Publication Date -01/08/2005 Date Updated -04/08/2005
i02040714
Bearing Cage (Drive Shaft) - Assemble
SMCS - 3267-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-0520 Driver Gp 1
1/5(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
28. Illustration 1 g01049301
1. Install retainer (22) onto spider (19). Raise the temperature of bearing (21). Install bearing
(21) onto spider (19) .
Illustration 2 g01049204
2. Install deflector (18), spider (19), and bolts (20) .
2/5(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
29. Illustration 3 g01049203
3. Install thrust washer (12), bearing (13), gear (14), thrust washer (15), seal (16), bolt (17),
retainer (11), and nut (10) onto cover (4) .
4. Use Tooling (B) to install seal (5). Install shaft (6), bearing (7), gear (8), and spacer (9) onto
cover (4) .
3/5(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
30. Please write to us.
Our email:
aservicemanualpdf@yahoo.com
Please go to the homepage
to get the full manual, or
other brand PDF manuals.
Home Site:
aservicemanualpdf.com
31. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
32. Illustration 4 g01049202
5. Install cover (4) and bolts (3) .
4/5(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
33. Illustration 5 g01049201
6. Install retainer (2) and bolts (1) .
End By: Install the bearing cage. Refer to Disassembly and Assembly, "Bearing Cage (Drive
Shaft) - Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 10 18:49:15 UTC+0800 2021
5/5(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
34. Shutdown SIS
Previous Screen
Product: WHEEL TRACTOR
Model: 623G WHEEL TRACTOR DBC
Configuration: 623G Wheel Tractor DBC00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
621G and 623G
Wheel Tractor-Scrapers
Power Train
Media Number -RENR7497-00 Publication Date -01/08/2005 Date Updated -04/08/2005
i02044770
Bearing Cage (Drive Shaft) - Install
SMCS - 3267-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2D-1201 Eyebolt 1
B 140-7742 Sleeve 1
NOTICE
Keep all parts clean from contaminants.
Contamination of the hydraulic system with foreign material will
reduce the service life of the hydraulic system components.
To prevent contaminants from entering the hydraulic system, always
plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.
Clean the hydraulic system properly after any major component
exchange or especially after a component failure, to remove any
contamination.
1/3(W)
w
2021/4/10
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...