1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing 17 components including bolts, retainers, seals, and housing pieces. Special tools are required to remove some parts.
3) The assembly process reverses the disassembly steps and includes installing new seals and sleeves using adhesive and pressing components together with special tools. Proper cleaning and inspection of parts is emphasized.
Caterpillar cat 349 d l excavator (prefix pzg) service repair manual (pzg0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 28 steps for assembly, installing components like washers, spacers, seals and the piston in reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 349 d excavator (prefix nnf) service repair manual (nnf00001 ...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and more. It then lists 28 steps for assembly, installing components like seals, spacers, washers, pistons and plugs in the reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 349 e excavator (prefix fjb) service repair manual (fjb00001 ...cdsaas
This document provides instructions for disassembling and assembling the hydraulic fan drive of a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, and pins. It then lists 31 steps for assembly, replacing components in reverse order and noting to keep parts clean to prevent contamination of the hydraulic system. Precise measurements and proper orientation of parts like washers is emphasized for correct reassembly.
This document provides instructions for removing and installing various engine components on a Caterpillar 349D2 excavator, including:
1. Removing and installing the rear gear group, which involves removing several gears, seals, bolts and bearings.
2. Removing the flywheel using lifting equipment and tools.
3. Installing the flywheel and ensuring it is properly seated.
4. Removing and installing the crankshaft rear seal using bolts and following inspection procedures.
Caterpillar cat 349 e l excavator (prefix etc) service repair manual (etc0000...cdsaas
This document provides instructions for removing and installing an air control valve on a Caterpillar C13 engine. The removal procedure involves disconnecting hoses and tubes, removing bolts, and separating housing components. The installation procedure is the reverse of removal. Proper torque is required for all bolts.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 27 steps for assembly, installing components like seals, pistons, housing, plates and head in reverse order of disassembly. Tools required are listed in tables. Cautions are provided about cleaning parts and preventing contamination of hydraulic systems.
Caterpillar cat 349 f l excavator (prefix bz2) service repair manual (bz20000...fjsjjekdkme
The document provides step-by-step instructions to disassemble a travel motor on an excavator model 349F L. It details 27 steps to remove components such as plugs, seals, springs, pistons, plates, and housings. Safety precautions are provided to wear protective equipment when removing parts with stored spring energy. Diagrams illustrate each step for clarifying proper disassembly procedures.
Caterpillar cat 349 d l excavator (prefix pzg) service repair manual (pzg0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 28 steps for assembly, installing components like washers, spacers, seals and the piston in reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 349 d excavator (prefix nnf) service repair manual (nnf00001 ...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and more. It then lists 28 steps for assembly, installing components like seals, spacers, washers, pistons and plugs in the reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 349 e excavator (prefix fjb) service repair manual (fjb00001 ...cdsaas
This document provides instructions for disassembling and assembling the hydraulic fan drive of a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, and pins. It then lists 31 steps for assembly, replacing components in reverse order and noting to keep parts clean to prevent contamination of the hydraulic system. Precise measurements and proper orientation of parts like washers is emphasized for correct reassembly.
This document provides instructions for removing and installing various engine components on a Caterpillar 349D2 excavator, including:
1. Removing and installing the rear gear group, which involves removing several gears, seals, bolts and bearings.
2. Removing the flywheel using lifting equipment and tools.
3. Installing the flywheel and ensuring it is properly seated.
4. Removing and installing the crankshaft rear seal using bolts and following inspection procedures.
Caterpillar cat 349 e l excavator (prefix etc) service repair manual (etc0000...cdsaas
This document provides instructions for removing and installing an air control valve on a Caterpillar C13 engine. The removal procedure involves disconnecting hoses and tubes, removing bolts, and separating housing components. The installation procedure is the reverse of removal. Proper torque is required for all bolts.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 27 steps for assembly, installing components like seals, pistons, housing, plates and head in reverse order of disassembly. Tools required are listed in tables. Cautions are provided about cleaning parts and preventing contamination of hydraulic systems.
Caterpillar cat 349 f l excavator (prefix bz2) service repair manual (bz20000...fjsjjekdkme
The document provides step-by-step instructions to disassemble a travel motor on an excavator model 349F L. It details 27 steps to remove components such as plugs, seals, springs, pistons, plates, and housings. Safety precautions are provided to wear protective equipment when removing parts with stored spring energy. Diagrams illustrate each step for clarifying proper disassembly procedures.
Caterpillar cat 349 e excavator (prefix rgh) service repair manual (rgh00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E excavator. The disassembly process includes 27 steps to remove components like the head assembly, brake housing, rotating group, barrel assembly and more. The assembly process reverses the disassembly with 13 steps like installing seals, springs, pistons and plates in the proper order and orientation. Precise torques and specifications are provided for correct installation of components.
Caterpillar cat 349 d2 l excavator (prefix yag) service repair manual (yag000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pistons, and housing. Precautions are outlined to prevent contamination and ensure proper installation of parts in their original locations. The assembly section instructs installation of components in reverse order and includes applying sealant and lubricant.
Caterpillar cat 349 d2 l excavator (prefix xac) service repair manual (xac000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, housing keys and more. It then lists 13 steps for assembly, replacing components in reverse order and noting to clean all parts, apply lubricant, and ensure proper orientation of washers and spacers. Tools required are listed for both disassembly and assembly processes.
Caterpillar cat 349 d excavator (prefix men) service repair manual (men00001 ...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 13 steps for assembly, including installing seals, spacers, pistons, housing, and tightening components. Required tools include eyebolts, pullers, drivers, and seals. Cleanliness is emphasized to prevent contamination of hydraulic components.
Caterpillar cat 349 e excavator (prefix spg) service repair manual (spg00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves removing 27 individual components from the motor housing, rotating group, and brake housing. The assembly process describes installing the components in reverse order and includes specifications for various parts. Proper lubrication and torque specifications are noted throughout.
Caterpillar cat 349 d l excavator (prefix rbj) service repair manual (rbj0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 13 steps for assembly, including installing seals, spacers, washers and plugs. Precautions are provided to keep parts clean and in proper orientation to avoid contamination and ensure correct assembly.
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pistons, and housing. Precautions are provided to keep parts clean and in correct orientation. Lubrication and torque specifications are included for reassembly.
The document provides instructions for disassembling and assembling a travel motor. It lists 30 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 31 steps for assembly, reinstalling these components in reverse order. Precautions are given to prevent contamination and ensure proper installation of parts like O-rings, seals, and pins in their original locations. Tools required are listed in a table.
Caterpillar cat 349 d l excavator (prefix khs) service repair manual (khs0000...cdsaas
The document provides instructions for assembling a travel motor. It describes 33 steps for installing various components like seals, pistons, plates, and bearings. Measurements are taken throughout to ensure proper assembly. Cleanliness is emphasized to prevent contaminating the hydraulic system. The travel motor must be filled with the correct oil type before operation to prevent damage.
Caterpillar cat 349 d l excavator (prefix jgb) service repair manual (jgb0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, disks, seals and pistons. It also provides assembly instructions, noting that all parts must be cleaned and O-rings replaced before reinstalling components like the rotating group, barrel and housing seals in the reverse order of disassembly. Proper identification and orientation of parts is emphasized to ensure correct assembly.
Caterpillar cat 349 e l excavator (prefix mzw) service repair manual (mzw0000...cdsaas
This document provides disassembly and assembly instructions for the final drive of a 349E L excavator. It includes specifications for parts, required tools, and a step-by-step procedure for assembling the final drive. The procedure involves installing bearings, seals, gears, shims, and other components in the proper order and ensuring correct torque and clearance specifications are followed.
Caterpillar cat 349 d2 l excavator (prefix zae) service repair manual (zae000...cdsaas
This document provides instructions for removing and installing the rear gear group and crankshaft rear seal on a C13 engine. The removal procedure involves using various tools to remove 11 components in 9 steps. The installation procedure involves preparing and installing 14 components in 12 steps, ensuring proper dimensions and torque specifications are followed. Proper cleaning and use of locking compounds is emphasized.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E L VG excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps, covering lubrication of parts and installation of components in reverse order of disassembly, like installing seals, springs, pistons, and housing pieces. Specifications are provided for torque and dimensions of components. Required tools are listed.
Caterpillar cat 349 d l mobile hydraulic excavator (prefix dkn) service repai...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like the displacement change valve and head. Internal components like the brake piston, disks, and rotating group are then removed. Individual parts in the rotating group like the piston assemblies and barrel are also taken apart. The assembly instructions reverse the disassembly process and provide details on cleaning, lubricating, and installing parts in their proper positions and with the correct torque specifications.
Caterpillar cat 349 d2 l excavator (prefix yae) service repair manual (yae000...cdsaas
The document provides instructions for assembling and installing a travel motor. It outlines 33 steps for assembling components like pistons, seals, plates, and bearings. Measurement checks are specified to ensure proper assembly. Tools required are listed. Cleanliness is emphasized to prevent contaminating the hydraulic system.
Caterpillar cat 349 f excavator (prefix tew) service repair manual (tew00001 ...fjsjjekdkme
1. The document provides step-by-step instructions for disassembling and assembling the travel motor on 349F and 349F L excavators.
2. It describes removing over 30 components of the travel motor in sequential order, including plugs, springs, pistons, plates, seals, and more.
3. Precautions are provided to protect against spring forces and ensure components are reinstalled in their original positions and order.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...cdsaas
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing 22 components including bolts, seals, plates, and housing pieces.
3) The assembly process reverses the disassembly steps and includes applying sealant and pressing components together using various tools.
Caterpillar Cat 349E L Excavator (Prefix TFG) Service Repair Manual (TFG00001...zatao0179249295
1. The document provides step-by-step instructions for disassembling and assembling a hydraulic fan drive for a 349E L excavator.
2. The disassembly process involves removing 22 components and parts from the fan drive assembly including sensors, retainers, seals, plates, discs, and housings.
3. The assembly process lists 8 steps including pressing components back together and installing new seals, sleeves and retaining rings. Precise instructions are provided along with required tools.
Caterpillar Cat 349E L Excavator (Prefix TFG) Service Repair Manual (TFG00001...yinranhe0814
This document provides instructions for disassembling and assembling a hydraulic fan drive on a 349E L excavator. The disassembly process involves removing 22 parts in sequential order, taking care to note the order and orientation of components. The assembly follows the reverse of the disassembly order. Precision tools are required and cleanliness is important to prevent damage to components. Safety precautions are provided for spring loaded parts.
Caterpillar Cat 349E L Excavator (Prefix TFG) Service Repair Manual (TFG00001...wfu089267
This document provides instructions for disassembling and assembling a hydraulic fan drive on a 349E L excavator. The disassembly process involves removing 22 parts in sequential order, taking care to note the order and orientation of components. The assembly follows the reverse of the disassembly order. Precision tools are required and cleanliness is important to prevent damage to components. Safety precautions are provided for spring loaded parts.
Caterpillar Cat 349E and 349E L Excavator (Prefix FJB) Service Repair Manual ...f89siekkmdmm2w
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar Cat 349E and 349E L Excavator (Prefix FJB) Service Repair Manual ...f8uejkdkdmm3e
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar cat 349 e excavator (prefix rgh) service repair manual (rgh00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E excavator. The disassembly process includes 27 steps to remove components like the head assembly, brake housing, rotating group, barrel assembly and more. The assembly process reverses the disassembly with 13 steps like installing seals, springs, pistons and plates in the proper order and orientation. Precise torques and specifications are provided for correct installation of components.
Caterpillar cat 349 d2 l excavator (prefix yag) service repair manual (yag000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pistons, and housing. Precautions are outlined to prevent contamination and ensure proper installation of parts in their original locations. The assembly section instructs installation of components in reverse order and includes applying sealant and lubricant.
Caterpillar cat 349 d2 l excavator (prefix xac) service repair manual (xac000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, housing keys and more. It then lists 13 steps for assembly, replacing components in reverse order and noting to clean all parts, apply lubricant, and ensure proper orientation of washers and spacers. Tools required are listed for both disassembly and assembly processes.
Caterpillar cat 349 d excavator (prefix men) service repair manual (men00001 ...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 13 steps for assembly, including installing seals, spacers, pistons, housing, and tightening components. Required tools include eyebolts, pullers, drivers, and seals. Cleanliness is emphasized to prevent contamination of hydraulic components.
Caterpillar cat 349 e excavator (prefix spg) service repair manual (spg00001 ...cdsaas
This document provides instructions for disassembling and assembling the travel motor on 349E and 349E L excavator models. The disassembly process involves removing 27 individual components from the motor housing, rotating group, and brake housing. The assembly process describes installing the components in reverse order and includes specifications for various parts. Proper lubrication and torque specifications are noted throughout.
Caterpillar cat 349 d l excavator (prefix rbj) service repair manual (rbj0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 13 steps for assembly, including installing seals, spacers, washers and plugs. Precautions are provided to keep parts clean and in proper orientation to avoid contamination and ensure correct assembly.
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pistons, and housing. Precautions are provided to keep parts clean and in correct orientation. Lubrication and torque specifications are included for reassembly.
The document provides instructions for disassembling and assembling a travel motor. It lists 30 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 31 steps for assembly, reinstalling these components in reverse order. Precautions are given to prevent contamination and ensure proper installation of parts like O-rings, seals, and pins in their original locations. Tools required are listed in a table.
Caterpillar cat 349 d l excavator (prefix khs) service repair manual (khs0000...cdsaas
The document provides instructions for assembling a travel motor. It describes 33 steps for installing various components like seals, pistons, plates, and bearings. Measurements are taken throughout to ensure proper assembly. Cleanliness is emphasized to prevent contaminating the hydraulic system. The travel motor must be filled with the correct oil type before operation to prevent damage.
Caterpillar cat 349 d l excavator (prefix jgb) service repair manual (jgb0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, disks, seals and pistons. It also provides assembly instructions, noting that all parts must be cleaned and O-rings replaced before reinstalling components like the rotating group, barrel and housing seals in the reverse order of disassembly. Proper identification and orientation of parts is emphasized to ensure correct assembly.
Caterpillar cat 349 e l excavator (prefix mzw) service repair manual (mzw0000...cdsaas
This document provides disassembly and assembly instructions for the final drive of a 349E L excavator. It includes specifications for parts, required tools, and a step-by-step procedure for assembling the final drive. The procedure involves installing bearings, seals, gears, shims, and other components in the proper order and ensuring correct torque and clearance specifications are followed.
Caterpillar cat 349 d2 l excavator (prefix zae) service repair manual (zae000...cdsaas
This document provides instructions for removing and installing the rear gear group and crankshaft rear seal on a C13 engine. The removal procedure involves using various tools to remove 11 components in 9 steps. The installation procedure involves preparing and installing 14 components in 12 steps, ensuring proper dimensions and torque specifications are followed. Proper cleaning and use of locking compounds is emphasized.
Caterpillar cat 349 e l excavator (prefix kfx) service repair manual (kfx0000...cdsaas
This document provides instructions for disassembling and assembling the travel motor on a 349E L VG excavator. It includes 27 steps for disassembly, removing components like seals, springs, bearings, and housing pieces. The assembly section has 13 steps, covering lubrication of parts and installation of components in reverse order of disassembly, like installing seals, springs, pistons, and housing pieces. Specifications are provided for torque and dimensions of components. Required tools are listed.
Caterpillar cat 349 d l mobile hydraulic excavator (prefix dkn) service repai...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It begins with removing external components like the displacement change valve and head. Internal components like the brake piston, disks, and rotating group are then removed. Individual parts in the rotating group like the piston assemblies and barrel are also taken apart. The assembly instructions reverse the disassembly process and provide details on cleaning, lubricating, and installing parts in their proper positions and with the correct torque specifications.
Caterpillar cat 349 d2 l excavator (prefix yae) service repair manual (yae000...cdsaas
The document provides instructions for assembling and installing a travel motor. It outlines 33 steps for assembling components like pistons, seals, plates, and bearings. Measurement checks are specified to ensure proper assembly. Tools required are listed. Cleanliness is emphasized to prevent contaminating the hydraulic system.
Caterpillar cat 349 f excavator (prefix tew) service repair manual (tew00001 ...fjsjjekdkme
1. The document provides step-by-step instructions for disassembling and assembling the travel motor on 349F and 349F L excavators.
2. It describes removing over 30 components of the travel motor in sequential order, including plugs, springs, pistons, plates, seals, and more.
3. Precautions are provided to protect against spring forces and ensure components are reinstalled in their original positions and order.
Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg0000...cdsaas
1) The document provides step-by-step instructions for disassembling and assembling the hydraulic fan drive of a 349E L excavator.
2) The disassembly process involves removing 22 components including bolts, seals, plates, and housing pieces.
3) The assembly process reverses the disassembly steps and includes applying sealant and pressing components together using various tools.
Caterpillar Cat 349E L Excavator (Prefix TFG) Service Repair Manual (TFG00001...zatao0179249295
1. The document provides step-by-step instructions for disassembling and assembling a hydraulic fan drive for a 349E L excavator.
2. The disassembly process involves removing 22 components and parts from the fan drive assembly including sensors, retainers, seals, plates, discs, and housings.
3. The assembly process lists 8 steps including pressing components back together and installing new seals, sleeves and retaining rings. Precise instructions are provided along with required tools.
Caterpillar Cat 349E L Excavator (Prefix TFG) Service Repair Manual (TFG00001...yinranhe0814
This document provides instructions for disassembling and assembling a hydraulic fan drive on a 349E L excavator. The disassembly process involves removing 22 parts in sequential order, taking care to note the order and orientation of components. The assembly follows the reverse of the disassembly order. Precision tools are required and cleanliness is important to prevent damage to components. Safety precautions are provided for spring loaded parts.
Caterpillar Cat 349E L Excavator (Prefix TFG) Service Repair Manual (TFG00001...wfu089267
This document provides instructions for disassembling and assembling a hydraulic fan drive on a 349E L excavator. The disassembly process involves removing 22 parts in sequential order, taking care to note the order and orientation of components. The assembly follows the reverse of the disassembly order. Precision tools are required and cleanliness is important to prevent damage to components. Safety precautions are provided for spring loaded parts.
Caterpillar Cat 349E and 349E L Excavator (Prefix FJB) Service Repair Manual ...f89siekkmdmm2w
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar Cat 349E and 349E L Excavator (Prefix FJB) Service Repair Manual ...f8uejkdkdmm3e
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar Cat 349E L Excavator (Prefix FJB) Service Repair Manual (FJB00001...fujsekmd9idd
This document provides instructions for disassembling and assembling the hydraulic fan drive of a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
The document provides instructions for disassembling and assembling a hydraulic fan drive for an excavator. It describes 22 steps to disassemble the components of the fan drive including removing bolts, seals, retaining rings, discs, and housing parts. It then describes 14 steps for reassembling the fan drive components in reverse order, noting the importance of cleanliness and applying retaining compounds and pressing components together using the appropriate tools.
Caterpillar Cat 349E L Excavator (Prefix FJB) Service Repair Manual (FJB00001...fuusejkddmmd3e
The document provides instructions for disassembling and assembling a hydraulic fan drive for an excavator. It describes 22 steps to disassemble the components of the fan drive including removing bolts, seals, retaining rings, discs, and housing parts. It then describes 14 steps for reassembling the fan drive components in reverse order, noting the importance of cleanliness and applying retaining compounds and pressing components together using the appropriate tools.
Caterpillar Cat 349E and 349E L Excavator (Prefix FJB) Service Repair Manual ...shibi1322
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar Cat 349E and 349E L Excavator (Prefix FJB) Service Repair Manual ...fucheng89
This document provides instructions for disassembling and assembling the hydraulic fan drive of a 349E excavator. The disassembly process involves removing 22 components in sequential order, taking care to note locations and orientations. Assembly is the reverse of disassembly, applying sealant and torque specifications as indicated. Precision and cleanliness are important to prevent damage to components.
Caterpillar cat 349 e excavator (prefix fjb) service repair manual (fjb00001 ...didkkskdmmd
The document provides instructions for disassembling and assembling a hydraulic fan drive for an excavator. It describes 22 steps to disassemble the components of the fan drive including removing bolts, seals, retaining rings, discs, and housing parts. It then describes 14 steps for reassembling the fan drive components in reverse order, noting the importance of cleanliness and applying retaining compounds and pressing components together using the appropriate tools.
Caterpillar Cat 349E L Excavator (Prefix FJB) Service Repair Manual (FJB00001...jdksmmdmdd
The document provides instructions for disassembling and assembling a hydraulic fan drive for an excavator. It details 22 steps for disassembly, removing components like bolts, retainers, seals, discs, and housing pieces. It then details 14 steps for reassembly, including pressing in bearings and seals, installing retaining rings, and pressing the shaft assembly back into place using the proper tools. Cleanliness is emphasized throughout to prevent contamination of precision components.
Caterpillar Cat 349E L Excavator (Prefix FJB) Service Repair Manual (FJB00001...jdkskmmdd
The document provides instructions for disassembling and assembling a hydraulic fan drive for an excavator. It describes 22 steps to disassemble the components of the fan drive including removing bolts, seals, retaining rings, discs, and housing parts. It then describes 14 steps for reassembling the fan drive components in reverse order, noting the importance of cleanliness and applying retaining compounds and drivers as needed. Precision tools are required for removing and installing small components like seals, bearings, and retaining rings.
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in a specific order, taking care to contain fluids and prevent dirt entry. The assembly process reverses the disassembly steps and includes applying sealants and torquing bolts to the specified ranges. Precision and cleanliness are important to prevent damage to components.
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in a specific order, taking care to contain fluids and prevent dirt entry. The assembly process reverses the disassembly steps and includes applying sealants and torquing bolts to the specified ranges. Precision and cleanliness are important to prevent damage to components.
Caterpillar Cat 349E and 349E L Excavator (Prefix FJB) Service Repair Manual ...8foskkdjdkdm3e
The document provides instructions for disassembling and assembling a hydraulic fan drive for an excavator. It describes 22 steps to disassemble the components of the fan drive including removing bolts, seals, retaining rings, discs, and housing parts. It then describes 14 steps for reassembling the components in reverse order, noting the importance of cleanliness and applying sealant where needed. Precision tools are listed that are required for removing and installing small components like seals, bearings, and retaining rings.
Caterpillar Cat 349E and 349E L Excavator (Prefix FJB) Service Repair Manual ...jiazhi27185
This document provides instructions for disassembling and assembling the hydraulic fan drive on a 349E excavator. The disassembly process involves removing 22 components in a specific order, taking care to contain fluids and prevent dirt entry. The assembly process reverses the disassembly steps and includes applying sealants and torque specifications when reinstalling components like bolts and seals. Precision and cleanliness are important to prevent damage to parts during the processes.
The document provides instructions for disassembling and assembling a hydraulic fan drive for a 349E excavator. It describes 22 steps to disassemble the components, including removing bolts, retainers, seals, discs, and housing parts. It then describes 14 steps for reassembling the components, applying sealant and installing seals, sleeves, bearings and housing pieces in the reverse order of disassembly. Precision cleaning and special tools are required to prevent damage to parts during the process.
Caterpillar Cat 349E L Excavator (Prefix FJB) Service Repair Manual (FJB00001...fujkse9didkke3
The document provides instructions for disassembling and assembling a hydraulic fan drive for a 349E excavator. It describes 22 steps to disassemble the components, including removing bolts, retainers, seals, discs, and housing parts. It then describes 14 steps for reassembling the components, applying sealant and installing seals, sleeves, bearings and housing pieces in the reverse order of disassembly. Precision cleaning and special tools are required to prevent damage to parts during the process.
Similar to Caterpillar cat 349 e l excavator (prefix tfg) service repair manual (tfg00001 and up) (20)
Caterpillar cat 349 d2 l excavator (prefix sdm) service repair manual (sdm000...didkkskdmmd
The document provides instructions for disassembling a travel motor. It lists 30 steps to remove parts like the head, plates, seals, pistons, and housing. Tools include eyebolts, pullers, drivers, and presses. Removed parts must be cleaned and reinstalled in their original positions and orientations during reassembly to avoid damaging components. Safety notices warn of risks like fluids, springs, and heavy lifting.
Caterpillar cat 349 d2 l excavator (prefix ran) service repair manual (ran000...didkkskdmmd
The document provides instructions for disassembling a travel motor. It lists the required tools and gives step-by-step instructions to remove parts like the head, plates, seals, pins, bearing, and more. Safety notices are included to handle parts carefully, avoid damage, clean components properly, and contain fluids.
Caterpillar cat 349 d2 l excavator (prefix pfd) service repair manual (pfd000...didkkskdmmd
The document provides instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pistons, and housing. Tools include eyebolts, pullers, drivers, and presses. Removed parts must be cleaned and reinstalled in their original positions and orientations during reassembly.
Caterpillar cat 349 d2 l excavator (prefix gax) service repair manual (gax000...didkkskdmmd
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, and more. Identification marks should be made on matching parts for reassembly. Cleanliness is important to prevent contamination. The assembly process reverses the disassembly steps.
This document provides instructions for removing and installing the rear gear group on a 349D2 and 349D2 L excavator powered by a C13 engine. The removal procedure involves 11 steps including removing bolts, gears, seals, bushings and bearings. The installation procedure involves 12 steps including lowering temperatures of bearings before installation, applying sealant to bolts, and ensuring proper dimensions are met. Tools including drivers and installer are required.
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pistons, and housing. Precautions are outlined to prevent contamination and ensure proper installation of parts in their original locations. The assembly section instructs installation of components in reverse order and includes applying sealant and lubricant.
This document provides instructions for removing and installing various engine components on a Caterpillar 349D2 excavator, including:
1. Removing and installing the rear gear group, which involves removing several gears, seals, bolts and bearings.
2. Removing the flywheel using lifting equipment and tools.
3. Installing the flywheel and ensuring it is properly seated.
4. Removing and installing the crankshaft rear seal using bolts and following inspection procedures.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 29 steps for assembly, installing components like seals, pistons, plates, and housing in reverse order of disassembly. Tools required are listed in a table. Cautions are provided about cleanliness, contamination, marking parts locations, and applying lubricant before assembly.
The document provides instructions for disassembling a travel motor. It lists the required tools and gives step-by-step instructions to remove parts like the head, plates, seals, pins, bearing, and piston. Safety notices are included to handle parts carefully, avoid damage, clean components properly, and contain fluids.
The document provides instructions for disassembling a travel motor. It lists 30 steps to remove parts like the head, plates, seals, pistons, and housing. Tools include eyebolts, pullers, drivers, and presses. Removed parts must be cleaned and reinstalled in their original positions and orientations during reassembly to avoid damaging components. Safety notices warn of risks like fluids, springs, and heavy lifting.
The document provides instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pistons, and housing. Tools include eyebolts, pullers, drivers, and presses. Removed parts must be cleaned and reinstalled in their original positions and orientations during reassembly.
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, and more. The instructions note to mark parts locations and orientations. Reassembly follows the reverse order, and cautions are provided to avoid damage and contamination.
Caterpillar cat 349 d l mobile hydraulic excavator (prefix dkn) service repai...didkkskdmmd
The document provides instructions for disassembling a travel motor. It begins by removing the displacement change valve and O-rings from the motor head. Several plugs, bolts, and seals are then removed from the head and housing. Pins and plates are taken out, and bearing pullers are used to remove internal components like bearings. The rotating group, piston assemblies, seals, and other pieces are dismantled using various tools. Detailed steps and illustrations guide the disassembly process.
Caterpillar cat 349 d l excavator (prefix wtd) service repair manual (wtd0000...didkkskdmmd
The document provides instructions for assembling a travel motor. It lists the required tools and begins by noting the importance of cleanliness. It then provides 33 steps describing how to install seals, spacers, pistons, disks, bearings and other components into the travel motor housing and barrel. It concludes by stating the travel motor should be filled with the correct oil specification prior to operation.
Caterpillar cat 349 d l excavator (prefix rbj) service repair manual (rbj0000...didkkskdmmd
The document provides instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, disks, piston assemblies, seals and more. Special tools are required to remove some parts and care must be taken to prevent damage and contamination. All parts must be cleaned and reinstalled in their original locations and orientations.
Caterpillar cat 349 d l excavator (prefix pzg) service repair manual (pzg0000...didkkskdmmd
This document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions for removing components like the head, plates, disks, piston assemblies, seals and more. Special care must be taken to clean parts and ensure they are reinstalled in their original locations and orientations. Proper assembly prevents damage and contamination issues.
Caterpillar cat 349 d l excavator (prefix nnf) service repair manual (nnf0000...didkkskdmmd
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and more. It then lists 28 steps for assembly, installing components like seals, spacers, washers, pistons and plugs in the reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components during disassembly and reassembly.
Caterpillar cat 349 d l excavator (prefix men) service repair manual (men0000...didkkskdmmd
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing. It then lists 13 steps for assembly, including installing seals, spacers, pistons, housing, and tightening components. Required tools include eyebolts, pullers, drivers, and seals. Cleanliness is emphasized to prevent contamination of hydraulic components.
Caterpillar cat 349 d l excavator (prefix klh) service repair manual (klh0000...didkkskdmmd
The document provides step-by-step instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pistons, housing and more. Special tools are required to remove some parts and precautions must be taken when handling springs or heavy components. Each part is to be cleaned and inspected, replacing any that are worn or damaged.
Caterpillar cat 349 d l excavator (prefix khs) service repair manual (khs0000...didkkskdmmd
This document provides instructions for installing a travel motor on an excavator. It lists the required tools and parts. The procedure has 33 steps that include installing seals, spacers, pistons, plates, and bolts in the proper sequence and orientation. Measurements are taken throughout to ensure correct assembly. Proper cleaning and protection from contamination during installation is emphasized.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 349E L EXCAVATOR TFG
Configuration: 349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Media Number -KENR9847-03 Publication Date -01/01/2013 Date Updated -28/01/2013
i05239586
Fan Drive - Disassemble - Hydraulic Fan Drive
SMCS - 1359-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1861 Retaining Ring Pliers 1
B 9U-7480 Compressing Tube 1
C 1P-1859 Retaining Ring Pliers 1
D 1P-1863 Retaining Ring Pliers 1
Start By:
a. Remove the Hydraulic fan Drive. Refer to Disassembly and Assembly, "Fan Drive -
Remove and Install".
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, thoroughly
clean the exterior of the components. This procedure will help to prevent dirt from entering the
internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform
disassembly procedures on a clean work surface. Keep components covered and protected at all
times.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
1/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01208862
1. Remove bolt (2) and sensor (1).
Illustration 2 g01333292
2. Remove bolts (3). Remove retainer (4).
2/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g01333295
Illustration 4 g02089003
3. Remove O-ring seal (5) and drive flange (6).
4. Firmly secure drive flange (6) with a suitable vise. Protect drive flange (6) in order to
prevent damage during clamping.
5. Use a hammer and a chisel in order to break sleeve (6A). Use extreme care to prevent
damage to drive flange (6).
3/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g01208866
6. Remove bolts (7). Separate cover assembly (8) from case (9).
Illustration 6 g01333297
7. Position cover assembly (8) on the opposite side.
8. Remove O-ring seal (10) from cover assembly (8).
Illustration 7 g01208919
9. Use a suitable press in order to separate cover assembly (8) and clutch housing assembly
(11).
4/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g01258470
10. Remove lip seal (12). Use Tooling (A) in order to remove retaining ring (13). Use a suitable
press in order to remove bearing (14).
Illustration 9 g01208920
Note: Note the order of all the components in the clutch assembly.
11. Remove retaining ring (15). Remove retaining plate (16). Remove discs and clutch plates
(17).
Illustration 10 g01333298
5/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Use Tooling (B) and a suitable press to reposition piston (18). Use Tooling (C) in order to
remove retaining ring (19). Remove piston (18).
Illustration 11 g01333300
13. Remove seal (20) from piston (18).
Illustration 12 g01333301
14. Remove spring (21) from clutch housing assembly (11).
6/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 13 g01333303
15. Remove seal rings (22) from shaft assembly (24). Use Tooling (D) in order to remove
retaining ring (23).
Illustration 14 g02089058
16. Use a suitable press in order to remove shaft assembly (24) from case (9).
Illustration 15 g02089073
17. Remove seal (25) from shaft assembly (24).
7/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 18. Firmly secure shaft assembly (24) with a suitable vise. Protect shaft assembly (24) in order
to prevent damage during clamping.
19. Use a hammer and a chisel in order to break sleeve (30). Use extreme care to prevent
damage to shaft assembly (24).
Illustration 16 g01333308
20. Remove tube assembly (26) from case (9).
Illustration 17 g01333310
21. Remove lip seal (27) from case (9).
8/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 18 g01333314
22. Use Tooling (A) in order to remove retaining ring (28). Use a suitable press in order to
remove bearing (29) from case (9).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 19 18:32:52 UTC+0800 2020
9/9
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 349E L EXCAVATOR TFG
Configuration: 349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Media Number -KENR9847-03 Publication Date -01/01/2013 Date Updated -28/01/2013
i04142230
Fan Drive - Disassemble - Direct Drive
SMCS - 1359-015
Disassembly Procedure
Start By:
A. Remove the fan drive (direct drive).
Illustration 1 g02341528
1. Remove bolt (8), plate (7), bearing assembly (5), hub assembly (4), spacer (3), and bearing
assembly (2) from bracket assembly (1) .
2. Remove spring pin (6) from plate (7) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 19 18:33:47 UTC+0800 2020
1/2
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 349E L EXCAVATOR TFG
Configuration: 349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Media Number -KENR9847-03 Publication Date -01/01/2013 Date Updated -28/01/2013
i06192451
Fan Drive - Assemble - Hydraulic Fan Drive
SMCS - 1359-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1861 Retaining Ring Pliers 1
B 9U-7480 Compressing Tube 1
C 1P-1859 Retaining Ring Pliers 1
D 1P-1863 Retaining Ring Pliers 1
E - Loctite Flexible Anaerobic Gasket Flange 1
F - Loctite 648 1
G 359-4915 Driver 1
H 359-4916 Driver 1
Note: Caution is required while handling the lip seals. The lip seals can be damaged if objects or
cleaning fluids contact the sealing surface.
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts except the lip
seals with cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to
dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If
any parts are worn or damaged, use new parts for replacement.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the
components, if necessary.
1/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g01333314
1. Use a suitable press to install bearing (29) into case (9) . Use Tooling (A) in order to install
retaining ring (28) .
Illustration 2 g01333310
Note: Caution is required while handling the lip seals. The lip seals can be damaged if
objects or cleaning fluids contact the sealing surface.
2. Apply Tooling (E) to the outside diameter of lip seal (27) . Carefully install lip seal (27) into
case (9) .
2/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02092525
3. Install seal (25) onto shaft assembly (24) .
4. Apply Tooling (F) to the full diameter of the shoulder on shaft assembly (24) . Position new
sleeve (30) on shaft assembly (24) . The external chamfer on sleeve (30) will be on top. Use
Tooling (G) and a suitable press in order to install sleeve (30) . Remove excess Tooling (F) .
Illustration 4 g01333308
Illustration 5 g01286111
3/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 5. Position tube assembly (26) into case (9) .
6. Position case (9) and tube assembly (26) onto shaft assembly (24) .
7. Use a suitable press and a suitable driver to press shaft assembly (24) through the bearing
and through tube assembly (26) .
Illustration 6 g01333303
8. Use Tooling (D) in order to install retaining ring (23) . Install seal rings (22) onto shaft
assembly (24) .
Illustration 7 g01333301
9. Install spring (21) on clutch housing assembly (11) .
4/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g01333300
10. Install seal (20) on piston (18) .
Illustration 9 g01333298
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
11. Install piston (18) . Use Tooling (B) and a suitable press in order to position piston (18) .
Use Tooling (C) in order to install retaining ring (19) . Carefully release the tension on
Tooling (B) .
5/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 10 g01208920
12. Install clutch plates (16) and discs (17) . Install retaining ring (15) .
Illustration 11 g01209073
13. Position cover assembly (8) onto clutch housing assembly (11) .
Note: Make sure that the splines of cover assembly (8) fully engage all of the clutch plates
and discs in the clutch assembly.
6/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 12 g01209125
Illustration 13 g01258534
Note: Caution is required while handling the lip seals. The lip seals can be damaged if
objects or cleaning fluids contact the sealing surface.
14. Use a suitable press in order to install bearing (14) . Use Tooling (A) in order to install
retaining ring (13) . Install lip seal (12) .
Illustration 14 g01333297
15. Position cover assembly (8) on the opposite side.
16. Install O-ring seal (10) on cover assembly (8) .
7/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 15 g01208914
17. Position cover assembly (8) onto case (9) . Install bolts (7) and tighten bolts (7) to a
minimum torque of 18 N·m (13 lb ft) up to a maximum torque of 31 N·m (23 lb ft).
Illustration 16 g02092935
18. Apply Tooling (F) to the full diameter of the shoulder on drive flange (6) . Position new
sleeve (6A) on drive flange (6) . The external chamfer on sleeve (6A) will be on top. Use
Tooling (H) and a suitable press in order to install sleeve (6A) . Remove excess Tooling
(F) .
8/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 17 g01333295
19. Install drive flange (6) and O-ring seal (5) .
Illustration 18 g01333292
20. Install retainer (4) . Tighten retainer (4) to a minimum torque of 610 N·m (450 lb ft) up to a
maximum torque of 750 N·m (550 lb ft). After achieving the torque range, overtighten
retainer (4) as needed in order to align the next position for locking screws (3) .
21. Install locking screws (3) and tighten locking screws (3) to a minimum torque of 7 N·m (62
lb in) to a maximum torque of 10 N·m (89 lb in).
9/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. Illustration 19 g01208862
22. Position sensor (1) . Install bolt (2) .
End By: Install the fan clutch. Refer to Disassembly and Assembly, "Fan Clutch - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 19 18:34:43 UTC+0800 2020
10/10
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 349E L EXCAVATOR TFG
Configuration: 349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Media Number -KENR9847-03 Publication Date -01/01/2013 Date Updated -28/01/2013
i04142231
Fan Drive - Assemble - Direct Drive
SMCS - 1359-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 242 -
Illustration 1 g02341528
1. Install spring pin (6) into plate (7) .
2. Apply Tooling (A) to the threads of bolt (8). Install bearing assembly (2), spacer (3), hub
assembly (4), bearing assembly (5), plate (7), and bolt (8) onto bracket assembly (1).
Tighten bolt (8) to a torque of 115 ± 15 N·m (85 ± 11 lb ft).
1/2
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. End By: Install the fan drive (direct drive).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 19 18:35:39 UTC+0800 2020
2/2
349E L Excavators TFG00001-UP (MACHINE) POWERED BY C13 Engine(SEBP56...
2020/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...