This document provides instructions for assembling and disassembling a travel motor on Caterpillar 336F L and 336F LN excavators powered by a C9.3 engine. It lists required tools and parts and includes diagrams illustrating the 27 steps to assemble the travel motor. Removal instructions are also provided in 13 steps, including draining fluids and marking components for proper reinstallation.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...fjsjekdmmeme
This document provides instructions for disassembling the travel motor on 336F L and 336F LN excavator models. It lists the required tools and presents 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and port plate. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fjsjekdmmeme
This document provides the disassembly and assembly procedures for a travel motor on a 336F excavator model. The disassembly procedure involves 30 steps to remove components like springs, seals, plates, and housing pieces. The assembly procedure reverses the disassembly with 23 steps like installing seals, springs, pistons and housing components. Special tools are listed and safety notices are provided regarding spring forces and component alignment.
The document provides instructions for removing and installing various components on a 336 excavator, including the cab, window wiper motor, and connecting the upper frame and undercarriage frame. It includes lists of required tools and sequential steps supported by illustrations. Safety procedures and torque specifications are noted.
This document is a service manual table of contents for an SM-614 service manual. It contains sections on general information, electric control, hydraulic system, drive assembly, brake system, steering system, load carrier, body and frame, and optional equipment. Each section contains multiple subsections and lists the page numbers for each. It also includes notices about safety and liability as well as specifications for PWT and PWC models, serial number location, record keeping guidelines, required tools, a torque chart, and conversion factors.
John deere 790 compact utility tractor service repair manualfujskekfmsme
This technical manual provides information for repairing John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It covers engine repair, electrical systems, power trains, steering/brakes, hydraulics, and testing/diagnostics. Repair sections describe how to repair components, while diagnostic sections help identify routine failures. The manual is intended for experienced technicians and includes safety warnings, specifications, repair instructions, and diagrams.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekdmmeme
This document provides disassembly and assembly instructions for a 336F L excavator travel motor. The disassembly process involves removing 30 components from the travel motor in a specific sequence. Safety precautions are outlined due to parts under spring tension. The assembly section describes installing 35 components back into the travel motor housing following the reverse of the disassembly order. Tools required are listed for both procedures.
Caterpillar cat 336 f l excavator (prefix ljy) service repair manual (ljy0000...fjkskedmme
1. The document provides step-by-step instructions for disassembling and assembling the diesel exhaust fluid module of Caterpillar 336F excavators.
2. The disassembly procedure involves draining the fluid, removing hoses and connectors, and taking apart the various module components like the pump, tank, and control electronics.
3. The assembly procedure lists the parts and tools needed and describes reinstalling the components in reverse order and ensuring proper tightening of connections.
Caterpillar cat 336 e lh excavator (prefix rza) service repair manual (rza000...fjskekdmjekm
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly procedure involves removing 27 components of the travel motor including the head, springs, plates, seals, and housing cover. The assembly procedure describes installing these 27 components in reverse order and provides notes to ensure proper installation of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, and bearing puller group.
Caterpillar cat 336 f l excavator (prefix rbc) service repair manual (rbc0000...fjsjekdmmeme
This document provides instructions for disassembling the travel motor on 336F L and 336F LN excavator models. It lists the required tools and presents 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and port plate. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar cat 336 f l excavator (prefix wtz) service repair manual (wtz0000...fjsjekdmmeme
This document provides the disassembly and assembly procedures for a travel motor on a 336F excavator model. The disassembly procedure involves 30 steps to remove components like springs, seals, plates, and housing pieces. The assembly procedure reverses the disassembly with 23 steps like installing seals, springs, pistons and housing components. Special tools are listed and safety notices are provided regarding spring forces and component alignment.
The document provides instructions for removing and installing various components on a 336 excavator, including the cab, window wiper motor, and connecting the upper frame and undercarriage frame. It includes lists of required tools and sequential steps supported by illustrations. Safety procedures and torque specifications are noted.
This document is a service manual table of contents for an SM-614 service manual. It contains sections on general information, electric control, hydraulic system, drive assembly, brake system, steering system, load carrier, body and frame, and optional equipment. Each section contains multiple subsections and lists the page numbers for each. It also includes notices about safety and liability as well as specifications for PWT and PWC models, serial number location, record keeping guidelines, required tools, a torque chart, and conversion factors.
John deere 790 compact utility tractor service repair manualfujskekfmsme
This technical manual provides information for repairing John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It covers engine repair, electrical systems, power trains, steering/brakes, hydraulics, and testing/diagnostics. Repair sections describe how to repair components, while diagnostic sections help identify routine failures. The manual is intended for experienced technicians and includes safety warnings, specifications, repair instructions, and diagrams.
Caterpillar cat 336 f l excavator (prefix ssn) service repair manual (ssn0000...fjsjekdmmeme
This document provides disassembly and assembly instructions for a 336F L excavator travel motor. The disassembly process involves removing 30 components from the travel motor in a specific sequence. Safety precautions are outlined due to parts under spring tension. The assembly section describes installing 35 components back into the travel motor housing following the reverse of the disassembly order. Tools required are listed for both procedures.
Caterpillar cat 336 f l excavator (prefix ljy) service repair manual (ljy0000...fjkskedmme
1. The document provides step-by-step instructions for disassembling and assembling the diesel exhaust fluid module of Caterpillar 336F excavators.
2. The disassembly procedure involves draining the fluid, removing hoses and connectors, and taking apart the various module components like the pump, tank, and control electronics.
3. The assembly procedure lists the parts and tools needed and describes reinstalling the components in reverse order and ensuring proper tightening of connections.
Caterpillar cat 336 e lh excavator (prefix rza) service repair manual (rza000...fjskekdmjekm
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly procedure involves removing 27 components of the travel motor including the head, springs, plates, seals, and housing cover. The assembly procedure describes installing these 27 components in reverse order and provides notes to ensure proper installation of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, and bearing puller group.
Caterpillar cat 325 f lcr excavator (prefix xaa) service repair manual (xaa00...fjjskekdmme
This document provides instructions for disassembling and assembling the travel motor of a 325F LCR excavator. It describes 25 steps for disassembly, including removing the head, check valve assemblies, fittings, seals, pistons, and other components. It then describes 11 steps for assembly, including installing seals, bearings, keys, and other parts in the reverse order of disassembly. Personal protective equipment is recommended and cleaning and lubrication of parts is emphasized throughout the process.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjskekmdm
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. It lists 27 steps for disassembly, removing components like the head, springs, brake piston, plates and discs. It then lists 28 steps for assembly, reinstalling these components in reverse order and noting proper lubrication and torque specifications. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group and Loctite.
Caterpillar cat 320 c excavator (prefix pab) service repair manual (pab00001 ...uujjfjjkskmme
This document provides instructions for disconnecting and reconnecting track assemblies on a 320C excavator. It involves using various tools to guide the track, install bushings, and connect the ends of the track using a master pin. Safety precautions are outlined and 11 steps are provided to correctly connect the track, ensuring proper alignment and use of lubricant on the pins. A second document provides instructions for removing the front idler, recoil spring and hydraulic track adjuster as a single unit from the excavator, noting weights and safety warnings. It outlines 11 steps for their removal. A third document details the disassembly of the recoil spring, outlining safety warnings and 10 steps for positioning and leveling the spring in a reco
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar cat 336 f l excavator (prefix zbj) service repair manual (zbj0000...fjsjekdmmeme
This document provides instructions for servicing the travel motor on Caterpillar 336F L and 336F LN excavators. It describes the disassembly and assembly procedures, which include 27 individual steps. The document lists required tools and includes illustrations to clarify each step. The summary is:
1. The document provides a service repair manual for Caterpillar 336F L and 336F LN excavators, outlining the process for travel motor disassembly and assembly in 27 steps.
2. Illustrations and lists of required tools accompany the step-by-step instructions.
3. Reassembly requires applying sealant and torquing bolts to the specified values.
Caterpillar cat 336 f ln excavator (prefix zbj) service repair manual (zbj000...fjsjekdmmeme
This document provides instructions for assembling and disassembling a travel motor on Caterpillar 336F L and 336F LN excavators. It lists the required tools and parts and includes illustrations of each step. The assembly procedure involves installing seals, springs, pistons, bearings, and other components in the proper order. The disassembly and removal process describes draining fluid, disconnecting hoses, and using lifting devices to remove the final drive and travel motor assembly.
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...zatao0179249295
This document provides instructions for assembling and disassembling the travel motor on Caterpillar 336F L and 336F LN excavators. It includes 27 steps for travel motor assembly involving installation of seals, springs, pistons and other components. For removal, it outlines 13 steps including draining fluid, disconnecting hoses, and removing bolts to separate the final drive, travel motor and coupling. Tools required are listed for both assembly and removal procedures.
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...luanxianshi27
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...wfu089267
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
This document provides instructions for assembling and disassembling the travel motor on Caterpillar 336F L and 336F LN excavators. It includes 27 steps for travel motor assembly and 13 steps for removal of the final drive and travel motor. Tools required are listed in tables. Safety precautions are provided to prevent injury from hydraulic pressure.
This document is the service manual for the Clark SM-560 lift truck. It contains sections on safety, maintenance procedures, inspections, repairs, and specifications. The manual emphasizes the importance of regularly maintaining the lift truck according to the manufacturer's recommendations to ensure safe operation and maximum performance of the vehicle.
Clark tmg 13 20 x forklift service repair manualdidkkmmdm
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Clark tmg 12 25 forklift service repair manualdidkkmmdm
This document is a service manual for Clark forklifts that contains information on safety, maintenance, repairs, specifications and other technical details. It includes sections on topics such as batteries, motors, brakes, hydraulics, steering and other systems. The manual uses a standardized grouping and numbering system to organize content and make specific information easy to locate. Safety precautions and proper maintenance are emphasized throughout.
This document provides information about periodic maintenance and planned maintenance for HWX/PWX trucks, including:
1. Maintenance schedules and intervals that should be followed based on operating conditions.
2. Details of a planned maintenance program that includes inspections, tests, and recording truck conditions on a checklist.
3. A sample planned maintenance report form to document inspections and needed repairs.
This service manual provides maintenance and repair information for PWT tow tractors and PWC center controlled pallet trucks, including specifications for electrical systems, dimensions, capacities, component details, and a list of required tools. Standard specifications are provided for models of both the PWT and PWC, including motor type, gear ratios, speeds, dimensions, weight, battery options, tire types, and performance capacities. The document also includes sections on record keeping, torque charts, and maintenance recommendations to assist technicians in properly servicing the equipment.
Clark pwd 36 forklift service repair manualdidkkmmdm
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark pwd 30 forklift service repair manualdidkkmmdm
This document provides instructions and safety precautions for performing planned maintenance on Clark industrial trucks. It outlines inspection procedures for components like the battery, plug, and cover. Technicians should note any issues found on a check sheet using codes to indicate the urgency of repairs needed, from minor adjustments to replacements requiring a shop visit. Visual inspections and keeping electrical components jewelry-free are emphasized for safety.
Clark pwd 25 forklift service repair manualdidkkmmdm
This document provides instructions and safety precautions for performing planned maintenance on Clark industrial trucks. It outlines inspection procedures for components like the battery, plug, and cover. Technicians should carefully inspect all systems and note any issues found on the maintenance check sheet using a coding system to indicate the urgency of repairs needed. Safety is emphasized throughout, including wearing protective equipment and disabling trucks before working on electrical components.
The document is a service manual that provides general information and specifications for Clark PWT tow tractors and PWC center controlled pallet trucks, including details on their electrical systems, dimensions, capacities, component specifications, and maintenance requirements. It also includes a table of contents listing the sections covered in the manual, and notes that the power sections of the PWT and PWC are the same despite their different applications.
Caterpillar cat 325 f lcr excavator (prefix xaa) service repair manual (xaa00...fjjskekdmme
This document provides instructions for disassembling and assembling the travel motor of a 325F LCR excavator. It describes 25 steps for disassembly, including removing the head, check valve assemblies, fittings, seals, pistons, and other components. It then describes 11 steps for assembly, including installing seals, bearings, keys, and other parts in the reverse order of disassembly. Personal protective equipment is recommended and cleaning and lubrication of parts is emphasized throughout the process.
Caterpillar cat 336 e l excavator (prefix fjh) service repair manual (fjh0000...fjskekmdm
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing hoses, covers, and bolts to separate the final drive and travel motor assembly from the excavator frame.
2) Using lifting devices to remove the assembly and travel motor, which weigh 860kg and 184kg respectively.
3) Reversing the removal procedures to reinstall the components, applying locking agents and torquing bolts to the specified values.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjskekmdm
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. It lists 27 steps for disassembly, removing components like the head, springs, brake piston, plates and discs. It then lists 28 steps for assembly, reinstalling these components in reverse order and noting proper lubrication and torque specifications. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group and Loctite.
Caterpillar cat 320 c excavator (prefix pab) service repair manual (pab00001 ...uujjfjjkskmme
This document provides instructions for disconnecting and reconnecting track assemblies on a 320C excavator. It involves using various tools to guide the track, install bushings, and connect the ends of the track using a master pin. Safety precautions are outlined and 11 steps are provided to correctly connect the track, ensuring proper alignment and use of lubricant on the pins. A second document provides instructions for removing the front idler, recoil spring and hydraulic track adjuster as a single unit from the excavator, noting weights and safety warnings. It outlines 11 steps for their removal. A third document details the disassembly of the recoil spring, outlining safety warnings and 10 steps for positioning and leveling the spring in a reco
Caterpillar cat 336 e l excavator (prefix yep) service repair manual (yep0000...fjskekmdm
This document provides instructions for removing and installing the final drive and travel motor on a 336E L excavator. It outlines 28 steps for disassembly, including draining oil, removing covers, hoses, bolts and the final drive/travel motor assembly. It also details 13 steps for installation, which is the removal process in reverse order. Proper cleaning, lubrication and torque specifications are noted to correctly reassemble the components.
Caterpillar cat 336 f l excavator (prefix zbj) service repair manual (zbj0000...fjsjekdmmeme
This document provides instructions for servicing the travel motor on Caterpillar 336F L and 336F LN excavators. It describes the disassembly and assembly procedures, which include 27 individual steps. The document lists required tools and includes illustrations to clarify each step. The summary is:
1. The document provides a service repair manual for Caterpillar 336F L and 336F LN excavators, outlining the process for travel motor disassembly and assembly in 27 steps.
2. Illustrations and lists of required tools accompany the step-by-step instructions.
3. Reassembly requires applying sealant and torquing bolts to the specified values.
Caterpillar cat 336 f ln excavator (prefix zbj) service repair manual (zbj000...fjsjekdmmeme
This document provides instructions for assembling and disassembling a travel motor on Caterpillar 336F L and 336F LN excavators. It lists the required tools and parts and includes illustrations of each step. The assembly procedure involves installing seals, springs, pistons, bearings, and other components in the proper order. The disassembly and removal process describes draining fluid, disconnecting hoses, and using lifting devices to remove the final drive and travel motor assembly.
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...zatao0179249295
This document provides instructions for assembling and disassembling the travel motor on Caterpillar 336F L and 336F LN excavators. It includes 27 steps for travel motor assembly involving installation of seals, springs, pistons and other components. For removal, it outlines 13 steps including draining fluid, disconnecting hoses, and removing bolts to separate the final drive, travel motor and coupling. Tools required are listed for both assembly and removal procedures.
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...luanxianshi27
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
Caterpillar Cat 336F L Excavator (Prefix ZBJ) Service Repair Manual (ZBJ00001...wfu089267
This document provides assembly and disassembly instructions for repairing the travel motor on Caterpillar 336F L and 336F LN excavators. It includes a list of required tools and multi-step procedures with illustrations for tasks like installing seals and bearings, lubricating parts, and torquing bolts. The final section describes removing the final drive and travel motor as the starting point for disassembly.
This document provides instructions for assembling and disassembling the travel motor on Caterpillar 336F L and 336F LN excavators. It includes 27 steps for travel motor assembly and 13 steps for removal of the final drive and travel motor. Tools required are listed in tables. Safety precautions are provided to prevent injury from hydraulic pressure.
Similar to Caterpillar cat 336 f ln excavator (prefix zbj) service repair manual (zbj00001 and up) (7)
This document is the service manual for the Clark SM-560 lift truck. It contains sections on safety, maintenance procedures, inspections, repairs, and specifications. The manual emphasizes the importance of regularly maintaining the lift truck according to the manufacturer's recommendations to ensure safe operation and maximum performance of the vehicle.
Clark tmg 13 20 x forklift service repair manualdidkkmmdm
This document provides a summary of safe maintenance practices for industrial trucks. It discusses safety signs and messages used in service manuals. Proper ventilation, fire safety, and authorized personnel are important. Before working on a truck, raise the wheels, disconnect the battery, and check for fuel and electrical hazards. Replacements parts must meet manufacturer standards. Modifications require approval. Overall, maintenance should follow manufacturer procedures to ensure safety.
Clark tmg 12 25 forklift service repair manualdidkkmmdm
This document is a service manual for Clark forklifts that contains information on safety, maintenance, repairs, specifications and other technical details. It includes sections on topics such as batteries, motors, brakes, hydraulics, steering and other systems. The manual uses a standardized grouping and numbering system to organize content and make specific information easy to locate. Safety precautions and proper maintenance are emphasized throughout.
This document provides information about periodic maintenance and planned maintenance for HWX/PWX trucks, including:
1. Maintenance schedules and intervals that should be followed based on operating conditions.
2. Details of a planned maintenance program that includes inspections, tests, and recording truck conditions on a checklist.
3. A sample planned maintenance report form to document inspections and needed repairs.
This service manual provides maintenance and repair information for PWT tow tractors and PWC center controlled pallet trucks, including specifications for electrical systems, dimensions, capacities, component details, and a list of required tools. Standard specifications are provided for models of both the PWT and PWC, including motor type, gear ratios, speeds, dimensions, weight, battery options, tire types, and performance capacities. The document also includes sections on record keeping, torque charts, and maintenance recommendations to assist technicians in properly servicing the equipment.
Clark pwd 36 forklift service repair manualdidkkmmdm
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark pwd 30 forklift service repair manualdidkkmmdm
This document provides instructions and safety precautions for performing planned maintenance on Clark industrial trucks. It outlines inspection procedures for components like the battery, plug, and cover. Technicians should note any issues found on a check sheet using codes to indicate the urgency of repairs needed, from minor adjustments to replacements requiring a shop visit. Visual inspections and keeping electrical components jewelry-free are emphasized for safety.
Clark pwd 25 forklift service repair manualdidkkmmdm
This document provides instructions and safety precautions for performing planned maintenance on Clark industrial trucks. It outlines inspection procedures for components like the battery, plug, and cover. Technicians should carefully inspect all systems and note any issues found on the maintenance check sheet using a coding system to indicate the urgency of repairs needed. Safety is emphasized throughout, including wearing protective equipment and disabling trucks before working on electrical components.
The document is a service manual that provides general information and specifications for Clark PWT tow tractors and PWC center controlled pallet trucks, including details on their electrical systems, dimensions, capacities, component specifications, and maintenance requirements. It also includes a table of contents listing the sections covered in the manual, and notes that the power sections of the PWT and PWC are the same despite their different applications.
This document provides specifications, maintenance schedules, and repair procedures for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It includes sections on specifications, planned maintenance, adjustments, electrical systems, transmissions, and safety practices. The planned maintenance section outlines inspection and lubrication intervals, with tasks grouped into daily, monthly, quarterly, biannual, and annual maintenance checks.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks in safe operating condition, including inspections, operational checks, cleaning, lubrication, and adjustments. The document emphasizes following maintenance procedures and safety practices to avoid hazards that could result in injury or death. It also provides specifications for electrical systems, fluids, tires, and other components.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks safely operating, including inspections, operational checks, cleaning, lubrication, and adjustments. The document emphasizes safety practices for maintenance, such as raising the wheels, disconnecting power, and using blocks or stands before working under a truck.
This document provides specifications, maintenance schedules, adjustment procedures, and safety information for Clark PT-5, PT-7, PTT-5, and PTT-7 trucks. It outlines an essential planned maintenance program to keep the trucks in safe operating condition, including inspections, operational checks, cleaning, lubrication, and adjustments. Safety practices for maintenance are also listed, such as disconnecting power sources before working on electrical systems, and using lifting equipment rated for heavy components.
Caterpillar cat 336 f ln excavator (prefix wtz) service repair manual (wtz000...didkkmmdm
This document provides instructions to disassemble and assemble the travel motor on a 336F L and 336F LN excavator. The disassembly procedure involves removing 30 parts from the travel motor in 29 steps. The assembly procedure involves installing 35 parts into the travel motor in 10 steps, and notes that springs must be installed correctly and tools are needed to install seals and retainers safely.
Caterpillar cat 336 f ln excavator (prefix rbc) service repair manual (rbc000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F LN excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, various plugs, seals, springs, relief valves, and more. Detailed illustrations accompany each step to show how to properly remove and disassemble the parts. Safety notices are included throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 336 f ln excavator (prefix nbs) service repair manual (nbs000...didkkmmdm
This document provides instructions for disassembling the travel motor on a 336F L & 336F LN Excavator. It outlines 27 steps to remove parts like the motor head assembly, springs, seals, relief valves, plugs and spools. Various tools are required including a driver group, retaining ring pliers, bearing puller group and lifting eye assembly to safely remove parts and release spring forces during disassembly.
Caterpillar cat 336 f ln excavator (prefix kft) service repair manual (kft000...didkkmmdm
The document provides instructions for disassembling a 336F excavator travel motor. It describes 27 steps to remove components such as the motor head assembly, springs, seals, relief valves, plugs and bolts. Various tools are required including a driver group, retaining ring pliers, bearing puller group and eyebolt for lifting components. Safety precautions are provided to release spring forces and contain fluids.
Caterpillar cat 336 f ln excavator (prefix dkf) service repair manual (dkf000...didkkmmdm
This document provides instructions for disassembling and assembling the travel motor on Caterpillar 336F L and 336F LN excavator models. It outlines 27 steps to disassemble the travel motor by removing components like the head, springs, plates, seals and bearings. It then describes 17 steps to reassemble the travel motor by installing these same components in the reverse order. Tools required are also listed.
Caterpillar cat 336 f l excavator (prefix zbj) service repair manual (zbj0000...didkkmmdm
This document provides instructions for assembling and disassembling a travel motor on Caterpillar 336F L and 336F LN excavators powered by a C9.3 engine. It describes the required tools and parts, and provides a step-by-step process with illustrations for removing and installing the final drive, travel motor, and various components like seals, springs, and plates. The summary focuses on the high-level process and does not include part numbers or other specific details.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR ZBJ
Configuration: 336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
340F Excavator Machine Systems
Media Number -UENR6797-01 Publication Date -01/09/2015 Date Updated -21/12/2016
i07175112
Travel Motor - Assemble
SMCS - 4351-016
S/N - DKF1-UP
S/N - RBC1-UP
S/N - SGH1-UP
S/N - ZBJ1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Jun 17 17:52:56 UTC+0800 2020
10/10
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 E...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR ZBJ
Configuration: 336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
340F Excavator Machine Systems
Media Number -UENR6797-01 Publication Date -01/09/2015 Date Updated -21/12/2016
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
S/N - DKF1-UP
S/N - RBC1-UP
S/N - SGH1-UP
S/N - ZBJ1-UP
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
1/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
3/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
4/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
5/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Jun 17 17:53:51 UTC+0800 2020
6/6
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR ZBJ
Configuration: 336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
340F Excavator Machine Systems
Media Number -UENR6797-01 Publication Date -01/09/2015 Date Updated -21/12/2016
i03885522
Final Drive - Disassemble
SMCS - 4050-015
S/N - DKF1-UP
S/N - RBC1-UP
S/N - SGH1-UP
S/N - ZBJ1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
1/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 1 g02131413
1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 6 g02131877
8. Drive spring pin (17) into planetary shaft (18) with a suitable hammer and a suitable punch.
9. Remove planetary shaft (18), washer (20), roller bearing (20), planetary gear (23), and
washer (24) from the carrier assembly (21).
10. Remove spring pin (17) from planetary shaft (18) with a suitable hammer and a suitable
punch.
11. Remove retaining ring (19) and sun gear (25) from carrier assembly (21).
Illustration 7 g02131878
12. Remove spacer (26).
13. Attach Tooling (A) and a suitable lifting device to ring gear (27). The weight of ring gear
(27) is approximately 70 kg (155 lb). Remove bolts (28) and ring gear (27).
4/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 8 g02131879
14. Remove O-ring seal (29).
15. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (30). The weight
of planetary gear assembly (30) is approximately 57 kg (125 lb). Remove planetary gear
assembly (30).
Illustration 9 g02131881
16. Drive spring pin (31) into planetary shaft (32) with a suitable hammer and a suitable punch.
17. Remove planetary shaft (32), washer (33), roller bearings (35), planetary gear (36), and
washer (36) from the carrier assembly (34).
18. Remove spring pin (31) from planetary shaft (32) with a suitable hammer and a suitable
punch.
5/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 10 g02131882
Illustration 11 g02131885
19. Remove bolts (38). Use Tooling (B) in order to remove gear (39).
Illustration 12 g02131886
20. Remove shims (40).
6/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 13 g02131887
21. Attach Tooling (C) and a suitable lifting device to sprocket housing (41). The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Remove sprocket housing (41) and
roller bearing (42).
Illustration 14 g02131888
22. Remove bearing races (43) and Duo-Cone seal (44) from sprocket housing (41).
7/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 15 g02132155
23. Remove Duo-Cone seal (45) and roller bearing (47) from motor housing (48). The weight of
motor housing (48) is approximately 91 kg (200 lb).
24. If necessary, remove dowels (46) from motor housing (48).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Jun 17 17:54:47 UTC+0800 2020
8/8
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336F L EXCAVATOR ZBJ
Configuration: 336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
340F Excavator Machine Systems
Media Number -UENR6797-01 Publication Date -01/09/2015 Date Updated -21/12/2016
i05103849
Final Drive - Assemble
SMCS - 4050-016
S/N - DKF1-UP
S/N - RBC1-UP
S/N - SGH1-UP
S/N - ZBJ1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
D 5P-3931 Anti-Seize Compound -
E 1U-9895 Crossblock 1
F 6V-2012 Depth Micrometer 1
G 6V-7059 Micrometer () 1
H - Loctite 242 -
J 6V-2055 Grease -
K - Loctite 17430 -
1/12
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. L 8T-9206 Seal Installer 1
Illustration 1 g02132155
1. Apply Tooling (D) to the surface of dowels (46) . Install dowels (46) .
2. Raise the temperature of roller bearing (47) . Install the roller bearing (47) on motor housing
(48) .
3. Install Duo-Cone seal (45) .
Illustration 2 g02131888
4. Lower the temperature of bearing races (43) . Install bearing races (43) in sprocket housing
(41) .
5. Install Duo-Cone seal (44) .
2/12
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 3 g02131887
6. Attach Tooling (C) and a suitable lifting device to sprocket housing (41) . The weight of
sprocket housing (41) is approximately 107 kg (235 lb). Install sprocket housing (41) .
7. Raise the temperature of roller bearing (42) . Install the roller bearing (42) .
Illustration 4 g02135728
3/12
336F L & 336F LN Excavators ZBJ00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/6/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...